/* * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * vineetg: Jan 1011 * -sched_clock( ) no longer jiffies based. Uses the same clocksource * as gtod * * Rajeshwarr/Vineetg: Mar 2008 * -Implemented CONFIG_GENERIC_TIME (rather deleted arch specific code) * for arch independent gettimeofday() * -Implemented CONFIG_GENERIC_CLOCKEVENTS as base for hrtimers * * Vineetg: Mar 2008: Forked off from time.c which now is time-jiff.c */ /* ARC700 has two 32bit independent prog Timers: TIMER0 and TIMER1 * Each can programmed to go from @count to @limit and optionally * interrupt when that happens. * A write to Control Register clears the Interrupt * * We've designated TIMER0 for events (clockevents) * while TIMER1 for free running (clocksource) * * Newer ARC700 cores have 64bit clk fetching RTSC insn, preferred over TIMER1 * which however is currently broken */ #include #include #include #include #include #include #include #include #include #include #include /* Timer related Aux registers */ #define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */ #define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */ #define ARC_REG_TIMER0_CNT 0x21 /* timer 0 count */ #define ARC_REG_TIMER1_LIMIT 0x102 /* timer 1 limit */ #define ARC_REG_TIMER1_CTRL 0x101 /* timer 1 control */ #define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */ #define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */ #define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */ #define ARC_TIMER_MAX 0xFFFFFFFF static unsigned long arc_timer_freq; static int noinline arc_get_timer_clk(struct device_node *node) { struct clk *clk; int ret; clk = of_clk_get(node, 0); if (IS_ERR(clk)) { pr_err("timer missing clk"); return PTR_ERR(clk); } ret = clk_prepare_enable(clk); if (ret) { pr_err("Couldn't enable parent clk\n"); return ret; } arc_timer_freq = clk_get_rate(clk); return 0; } /********** Clock Source Device *********/ #ifdef CONFIG_ARC_HAS_GFRC static cycle_t arc_read_gfrc(struct clocksource *cs) { unsigned long flags; u32 l, h; local_irq_save(flags); __mcip_cmd(CMD_GFRC_READ_LO, 0); l = read_aux_reg(ARC_REG_MCIP_READBACK); __mcip_cmd(CMD_GFRC_READ_HI, 0); h = read_aux_reg(ARC_REG_MCIP_READBACK); local_irq_restore(flags); return (((cycle_t)h) << 32) | l; } static struct clocksource arc_counter_gfrc = { .name = "ARConnect GFRC", .rating = 400, .read = arc_read_gfrc, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init arc_cs_setup_gfrc(struct device_node *node) { struct mcip_bcr mp; int ret; READ_BCR(ARC_REG_MCIP_BCR, mp); if (!mp.gfrc) { pr_warn("Global-64-bit-Ctr clocksource not detected"); return -ENXIO; } ret = arc_get_timer_clk(node); if (ret) return ret; return clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq); } CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc); #endif #ifdef CONFIG_ARC_HAS_RTC #define AUX_RTC_CTRL 0x103 #define AUX_RTC_LOW 0x104 #define AUX_RTC_HIGH 0x105 static cycle_t arc_read_rtc(struct clocksource *cs) { unsigned long status; u32 l, h; /* * hardware has an internal state machine which tracks readout of * low/high and updates the CTRL.status if * - interrupt/exception taken between the two reads * - high increments after low has been read */ do { l = read_aux_reg(AUX_RTC_LOW); h = read_aux_reg(AUX_RTC_HIGH); status = read_aux_reg(AUX_RTC_CTRL); } while (!(status & _BITUL(31))); return (((cycle_t)h) << 32) | l; } static struct clocksource arc_counter_rtc = { .name = "ARCv2 RTC", .rating = 350, .read = arc_read_rtc, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init arc_cs_setup_rtc(struct device_node *node) { struct bcr_timer timer; int ret; READ_BCR(ARC_REG_TIMERS_BCR, timer); if (!timer.rtc) { pr_warn("Local-64-bit-Ctr clocksource not detected"); return -ENXIO; } /* Local to CPU hence not usable in SMP */ if (IS_ENABLED(CONFIG_SMP)) { pr_warn("Local-64-bit-Ctr not usable in SMP"); return -EINVAL; } ret = arc_get_timer_clk(node); if (ret) return ret; write_aux_reg(AUX_RTC_CTRL, 1); return clocksource_register_hz(&arc_counter_rtc, arc_timer_freq); } CLOCKSOURCE_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc); #endif /* * 32bit TIMER1 to keep counting monotonically and wraparound */ static cycle_t arc_read_timer1(struct clocksource *cs) { return (cycle_t) read_aux_reg(ARC_REG_TIMER1_CNT); } static struct clocksource arc_counter_timer1 = { .name = "ARC Timer1", .rating = 300, .read = arc_read_timer1, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init arc_cs_setup_timer1(struct device_node *node) { int ret; /* Local to CPU hence not usable in SMP */ if (IS_ENABLED(CONFIG_SMP)) return -EINVAL; ret = arc_get_timer_clk(node); if (ret) return ret; write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX); write_aux_reg(ARC_REG_TIMER1_CNT, 0); write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH); return clocksource_register_hz(&arc_counter_timer1, arc_timer_freq); } /********** Clock Event Device *********/ static int arc_timer_irq; /* * Arm the timer to interrupt after @cycles * The distinction for oneshot/periodic is done in arc_event_timer_ack() below */ static void arc_timer_event_setup(unsigned int cycles) { write_aux_reg(ARC_REG_TIMER0_LIMIT, cycles); write_aux_reg(ARC_REG_TIMER0_CNT, 0); /* start from 0 */ write_aux_reg(ARC_REG_TIMER0_CTRL, TIMER_CTRL_IE | TIMER_CTRL_NH); } static int arc_clkevent_set_next_event(unsigned long delta, struct clock_event_device *dev) { arc_timer_event_setup(delta); return 0; } static int arc_clkevent_set_periodic(struct clock_event_device *dev) { /* * At X Hz, 1 sec = 1000ms -> X cycles; * 10ms -> X / 100 cycles */ arc_timer_event_setup(arc_timer_freq / HZ); return 0; } static DEFINE_PER_CPU(struct clock_event_device, arc_clockevent_device) = { .name = "ARC Timer0", .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, .rating = 300, .set_next_event = arc_clkevent_set_next_event, .set_state_periodic = arc_clkevent_set_periodic, }; static irqreturn_t timer_irq_handler(int irq, void *dev_id) { /* * Note that generic IRQ core could have passed @evt for @dev_id if * irq_set_chip_and_handler() asked for handle_percpu_devid_irq() */ struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device); int irq_reenable = clockevent_state_periodic(evt); /* * Any write to CTRL reg ACks the interrupt, we rewrite the * Count when [N]ot [H]alted bit. * And re-arm it if perioid by [I]nterrupt [E]nable bit */ write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | TIMER_CTRL_NH); evt->event_handler(evt); return IRQ_HANDLED; } static int arc_timer_starting_cpu(unsigned int cpu) { struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device); evt->cpumask = cpumask_of(smp_processor_id()); clockevents_config_and_register(evt, arc_timer_freq, 0, ARC_TIMER_MAX); enable_percpu_irq(arc_timer_irq, 0); return 0; } static int arc_timer_dying_cpu(unsigned int cpu) { disable_percpu_irq(arc_timer_irq); return 0; } /* * clockevent setup for boot CPU */ static int __init arc_clockevent_setup(struct device_node *node) { struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device); int ret; arc_timer_irq = irq_of_parse_and_map(node, 0); if (arc_timer_irq <= 0) { pr_err("clockevent: missing irq"); return -EINVAL; } ret = arc_get_timer_clk(node); if (ret) { pr_err("clockevent: missing clk"); return ret; } /* Needs apriori irq_set_percpu_devid() done in intc map function */ ret = request_percpu_irq(arc_timer_irq, timer_irq_handler, "Timer0 (per-cpu-tick)", evt); if (ret) { pr_err("clockevent: unable to request irq\n"); return ret; } ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING, "AP_ARC_TIMER_STARTING", arc_timer_starting_cpu, arc_timer_dying_cpu); if (ret) { pr_err("Failed to setup hotplug state"); return ret; } return 0; } static int __init arc_of_timer_init(struct device_node *np) { static int init_count = 0; int ret; if (!init_count) { init_count = 1; ret = arc_clockevent_setup(np); } else { ret = arc_cs_setup_timer1(np); } return ret; } CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init); /* * Called from start_kernel() - boot CPU only */ void __init time_init(void) { of_clk_init(NULL); clocksource_probe(); }