/* * MPC52xx SPI bus driver. * * Copyright (C) 2008 Secret Lab Technologies Ltd. * * This file is released under the GPLv2 * * This is the driver for the MPC5200's dedicated SPI controller. * * Note: this driver does not support the MPC5200 PSC in SPI mode. For * that driver see drivers/spi/mpc52xx_psc_spi.c */ #include <linux/module.h> #include <linux/init.h> #include <linux/errno.h> #include <linux/of_platform.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/spi/spi.h> #include <linux/io.h> #include <linux/of_gpio.h> #include <linux/slab.h> #include <asm/time.h> #include <asm/mpc52xx.h> MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); MODULE_DESCRIPTION("MPC52xx SPI (non-PSC) Driver"); MODULE_LICENSE("GPL"); /* Register offsets */ #define SPI_CTRL1 0x00 #define SPI_CTRL1_SPIE (1 << 7) #define SPI_CTRL1_SPE (1 << 6) #define SPI_CTRL1_MSTR (1 << 4) #define SPI_CTRL1_CPOL (1 << 3) #define SPI_CTRL1_CPHA (1 << 2) #define SPI_CTRL1_SSOE (1 << 1) #define SPI_CTRL1_LSBFE (1 << 0) #define SPI_CTRL2 0x01 #define SPI_BRR 0x04 #define SPI_STATUS 0x05 #define SPI_STATUS_SPIF (1 << 7) #define SPI_STATUS_WCOL (1 << 6) #define SPI_STATUS_MODF (1 << 4) #define SPI_DATA 0x09 #define SPI_PORTDATA 0x0d #define SPI_DATADIR 0x10 /* FSM state return values */ #define FSM_STOP 0 /* Nothing more for the state machine to */ /* do. If something interesting happens */ /* then an IRQ will be received */ #define FSM_POLL 1 /* need to poll for completion, an IRQ is */ /* not expected */ #define FSM_CONTINUE 2 /* Keep iterating the state machine */ /* Driver internal data */ struct mpc52xx_spi { struct spi_master *master; void __iomem *regs; int irq0; /* MODF irq */ int irq1; /* SPIF irq */ unsigned int ipb_freq; /* Statistics; not used now, but will be reintroduced for debugfs */ int msg_count; int wcol_count; int wcol_ticks; u32 wcol_tx_timestamp; int modf_count; int byte_count; struct list_head queue; /* queue of pending messages */ spinlock_t lock; struct work_struct work; /* Details of current transfer (length, and buffer pointers) */ struct spi_message *message; /* current message */ struct spi_transfer *transfer; /* current transfer */ int (*state)(int irq, struct mpc52xx_spi *ms, u8 status, u8 data); int len; int timestamp; u8 *rx_buf; const u8 *tx_buf; int cs_change; int gpio_cs_count; unsigned int *gpio_cs; }; /* * CS control function */ static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value) { int cs; if (ms->gpio_cs_count > 0) { cs = ms->message->spi->chip_select; gpio_set_value(ms->gpio_cs[cs], value ? 0 : 1); } else out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08); } /* * Start a new transfer. This is called both by the idle state * for the first transfer in a message, and by the wait state when the * previous transfer in a message is complete. */ static void mpc52xx_spi_start_transfer(struct mpc52xx_spi *ms) { ms->rx_buf = ms->transfer->rx_buf; ms->tx_buf = ms->transfer->tx_buf; ms->len = ms->transfer->len; /* Activate the chip select */ if (ms->cs_change) mpc52xx_spi_chipsel(ms, 1); ms->cs_change = ms->transfer->cs_change; /* Write out the first byte */ ms->wcol_tx_timestamp = get_tbl(); if (ms->tx_buf) out_8(ms->regs + SPI_DATA, *ms->tx_buf++); else out_8(ms->regs + SPI_DATA, 0); } /* Forward declaration of state handlers */ static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, u8 status, u8 data); static int mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, u8 status, u8 data); /* * IDLE state * * No transfers are in progress; if another transfer is pending then retrieve * it and kick it off. Otherwise, stop processing the state machine */ static int mpc52xx_spi_fsmstate_idle(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) { struct spi_device *spi; int spr, sppr; u8 ctrl1; if (status && (irq != NO_IRQ)) dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", status); /* Check if there is another transfer waiting. */ if (list_empty(&ms->queue)) return FSM_STOP; /* get the head of the queue */ ms->message = list_first_entry(&ms->queue, struct spi_message, queue); list_del_init(&ms->message->queue); /* Setup the controller parameters */ ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; spi = ms->message->spi; if (spi->mode & SPI_CPHA) ctrl1 |= SPI_CTRL1_CPHA; if (spi->mode & SPI_CPOL) ctrl1 |= SPI_CTRL1_CPOL; if (spi->mode & SPI_LSB_FIRST) ctrl1 |= SPI_CTRL1_LSBFE; out_8(ms->regs + SPI_CTRL1, ctrl1); /* Setup the controller speed */ /* minimum divider is '2'. Also, add '1' to force rounding the * divider up. */ sppr = ((ms->ipb_freq / ms->message->spi->max_speed_hz) + 1) >> 1; spr = 0; if (sppr < 1) sppr = 1; while (((sppr - 1) & ~0x7) != 0) { sppr = (sppr + 1) >> 1; /* add '1' to force rounding up */ spr++; } sppr--; /* sppr quantity in register is offset by 1 */ if (spr > 7) { /* Don't overrun limits of SPI baudrate register */ spr = 7; sppr = 7; } out_8(ms->regs + SPI_BRR, sppr << 4 | spr); /* Set speed */ ms->cs_change = 1; ms->transfer = container_of(ms->message->transfers.next, struct spi_transfer, transfer_list); mpc52xx_spi_start_transfer(ms); ms->state = mpc52xx_spi_fsmstate_transfer; return FSM_CONTINUE; } /* * TRANSFER state * * In the middle of a transfer. If the SPI core has completed processing * a byte, then read out the received data and write out the next byte * (unless this transfer is finished; in which case go on to the wait * state) */ static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) { if (!status) return ms->irq0 ? FSM_STOP : FSM_POLL; if (status & SPI_STATUS_WCOL) { /* The SPI controller is stoopid. At slower speeds, it may * raise the SPIF flag before the state machine is actually * finished, which causes a collision (internal to the state * machine only). The manual recommends inserting a delay * between receiving the interrupt and sending the next byte, * but it can also be worked around simply by retrying the * transfer which is what we do here. */ ms->wcol_count++; ms->wcol_ticks += get_tbl() - ms->wcol_tx_timestamp; ms->wcol_tx_timestamp = get_tbl(); data = 0; if (ms->tx_buf) data = *(ms->tx_buf - 1); out_8(ms->regs + SPI_DATA, data); /* try again */ return FSM_CONTINUE; } else if (status & SPI_STATUS_MODF) { ms->modf_count++; dev_err(&ms->master->dev, "mode fault\n"); mpc52xx_spi_chipsel(ms, 0); ms->message->status = -EIO; ms->message->complete(ms->message->context); ms->state = mpc52xx_spi_fsmstate_idle; return FSM_CONTINUE; } /* Read data out of the spi device */ ms->byte_count++; if (ms->rx_buf) *ms->rx_buf++ = data; /* Is the transfer complete? */ ms->len--; if (ms->len == 0) { ms->timestamp = get_tbl(); ms->timestamp += ms->transfer->delay_usecs * tb_ticks_per_usec; ms->state = mpc52xx_spi_fsmstate_wait; return FSM_CONTINUE; } /* Write out the next byte */ ms->wcol_tx_timestamp = get_tbl(); if (ms->tx_buf) out_8(ms->regs + SPI_DATA, *ms->tx_buf++); else out_8(ms->regs + SPI_DATA, 0); return FSM_CONTINUE; } /* * WAIT state * * A transfer has completed; need to wait for the delay period to complete * before starting the next transfer */ static int mpc52xx_spi_fsmstate_wait(int irq, struct mpc52xx_spi *ms, u8 status, u8 data) { if (status && irq) dev_err(&ms->master->dev, "spurious irq, status=0x%.2x\n", status); if (((int)get_tbl()) - ms->timestamp < 0) return FSM_POLL; ms->message->actual_length += ms->transfer->len; /* Check if there is another transfer in this message. If there * aren't then deactivate CS, notify sender, and drop back to idle * to start the next message. */ if (ms->transfer->transfer_list.next == &ms->message->transfers) { ms->msg_count++; mpc52xx_spi_chipsel(ms, 0); ms->message->status = 0; ms->message->complete(ms->message->context); ms->state = mpc52xx_spi_fsmstate_idle; return FSM_CONTINUE; } /* There is another transfer; kick it off */ if (ms->cs_change) mpc52xx_spi_chipsel(ms, 0); ms->transfer = container_of(ms->transfer->transfer_list.next, struct spi_transfer, transfer_list); mpc52xx_spi_start_transfer(ms); ms->state = mpc52xx_spi_fsmstate_transfer; return FSM_CONTINUE; } /** * mpc52xx_spi_fsm_process - Finite State Machine iteration function * @irq: irq number that triggered the FSM or 0 for polling * @ms: pointer to mpc52xx_spi driver data */ static void mpc52xx_spi_fsm_process(int irq, struct mpc52xx_spi *ms) { int rc = FSM_CONTINUE; u8 status, data; while (rc == FSM_CONTINUE) { /* Interrupt cleared by read of STATUS followed by * read of DATA registers */ status = in_8(ms->regs + SPI_STATUS); data = in_8(ms->regs + SPI_DATA); rc = ms->state(irq, ms, status, data); } if (rc == FSM_POLL) schedule_work(&ms->work); } /** * mpc52xx_spi_irq - IRQ handler */ static irqreturn_t mpc52xx_spi_irq(int irq, void *_ms) { struct mpc52xx_spi *ms = _ms; spin_lock(&ms->lock); mpc52xx_spi_fsm_process(irq, ms); spin_unlock(&ms->lock); return IRQ_HANDLED; } /** * mpc52xx_spi_wq - Workqueue function for polling the state machine */ static void mpc52xx_spi_wq(struct work_struct *work) { struct mpc52xx_spi *ms = container_of(work, struct mpc52xx_spi, work); unsigned long flags; spin_lock_irqsave(&ms->lock, flags); mpc52xx_spi_fsm_process(0, ms); spin_unlock_irqrestore(&ms->lock, flags); } /* * spi_master ops */ static int mpc52xx_spi_setup(struct spi_device *spi) { if (spi->bits_per_word % 8) return -EINVAL; if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) return -EINVAL; if (spi->chip_select >= spi->master->num_chipselect) return -EINVAL; return 0; } static int mpc52xx_spi_transfer(struct spi_device *spi, struct spi_message *m) { struct mpc52xx_spi *ms = spi_master_get_devdata(spi->master); unsigned long flags; m->actual_length = 0; m->status = -EINPROGRESS; spin_lock_irqsave(&ms->lock, flags); list_add_tail(&m->queue, &ms->queue); spin_unlock_irqrestore(&ms->lock, flags); schedule_work(&ms->work); return 0; } /* * OF Platform Bus Binding */ static int __devinit mpc52xx_spi_probe(struct platform_device *op, const struct of_device_id *match) { struct spi_master *master; struct mpc52xx_spi *ms; void __iomem *regs; u8 ctrl1; int rc, i = 0; int gpio_cs; /* MMIO registers */ dev_dbg(&op->dev, "probing mpc5200 SPI device\n"); regs = of_iomap(op->dev.of_node, 0); if (!regs) return -ENODEV; /* initialize the device */ ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR; out_8(regs + SPI_CTRL1, ctrl1); out_8(regs + SPI_CTRL2, 0x0); out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */ out_8(regs + SPI_PORTDATA, 0x8); /* Deassert /SS signal */ /* Clear the status register and re-read it to check for a MODF * failure. This driver cannot currently handle multiple masters * on the SPI bus. This fault will also occur if the SPI signals * are not connected to any pins (port_config setting) */ in_8(regs + SPI_STATUS); out_8(regs + SPI_CTRL1, ctrl1); in_8(regs + SPI_DATA); if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) { dev_err(&op->dev, "mode fault; is port_config correct?\n"); rc = -EIO; goto err_init; } dev_dbg(&op->dev, "allocating spi_master struct\n"); master = spi_alloc_master(&op->dev, sizeof *ms); if (!master) { rc = -ENOMEM; goto err_alloc; } master->bus_num = -1; master->setup = mpc52xx_spi_setup; master->transfer = mpc52xx_spi_transfer; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; master->dev.of_node = op->dev.of_node; dev_set_drvdata(&op->dev, master); ms = spi_master_get_devdata(master); ms->master = master; ms->regs = regs; ms->irq0 = irq_of_parse_and_map(op->dev.of_node, 0); ms->irq1 = irq_of_parse_and_map(op->dev.of_node, 1); ms->state = mpc52xx_spi_fsmstate_idle; ms->ipb_freq = mpc5xxx_get_bus_frequency(op->dev.of_node); ms->gpio_cs_count = of_gpio_count(op->dev.of_node); if (ms->gpio_cs_count > 0) { master->num_chipselect = ms->gpio_cs_count; ms->gpio_cs = kmalloc(ms->gpio_cs_count * sizeof(unsigned int), GFP_KERNEL); if (!ms->gpio_cs) { rc = -ENOMEM; goto err_alloc; } for (i = 0; i < ms->gpio_cs_count; i++) { gpio_cs = of_get_gpio(op->dev.of_node, i); if (gpio_cs < 0) { dev_err(&op->dev, "could not parse the gpio field " "in oftree\n"); rc = -ENODEV; goto err_gpio; } rc = gpio_request(gpio_cs, dev_name(&op->dev)); if (rc) { dev_err(&op->dev, "can't request spi cs gpio #%d " "on gpio line %d\n", i, gpio_cs); goto err_gpio; } gpio_direction_output(gpio_cs, 1); ms->gpio_cs[i] = gpio_cs; } } else { master->num_chipselect = 1; } spin_lock_init(&ms->lock); INIT_LIST_HEAD(&ms->queue); INIT_WORK(&ms->work, mpc52xx_spi_wq); /* Decide if interrupts can be used */ if (ms->irq0 && ms->irq1) { rc = request_irq(ms->irq0, mpc52xx_spi_irq, 0, "mpc5200-spi-modf", ms); rc |= request_irq(ms->irq1, mpc52xx_spi_irq, 0, "mpc5200-spi-spif", ms); if (rc) { free_irq(ms->irq0, ms); free_irq(ms->irq1, ms); ms->irq0 = ms->irq1 = 0; } } else { /* operate in polled mode */ ms->irq0 = ms->irq1 = 0; } if (!ms->irq0) dev_info(&op->dev, "using polled mode\n"); dev_dbg(&op->dev, "registering spi_master struct\n"); rc = spi_register_master(master); if (rc) goto err_register; dev_info(&ms->master->dev, "registered MPC5200 SPI bus\n"); return rc; err_register: dev_err(&ms->master->dev, "initialization failed\n"); spi_master_put(master); err_gpio: while (i-- > 0) gpio_free(ms->gpio_cs[i]); kfree(ms->gpio_cs); err_alloc: err_init: iounmap(regs); return rc; } static int __devexit mpc52xx_spi_remove(struct platform_device *op) { struct spi_master *master = dev_get_drvdata(&op->dev); struct mpc52xx_spi *ms = spi_master_get_devdata(master); int i; free_irq(ms->irq0, ms); free_irq(ms->irq1, ms); for (i = 0; i < ms->gpio_cs_count; i++) gpio_free(ms->gpio_cs[i]); kfree(ms->gpio_cs); spi_unregister_master(master); spi_master_put(master); iounmap(ms->regs); return 0; } static const struct of_device_id mpc52xx_spi_match[] __devinitconst = { { .compatible = "fsl,mpc5200-spi", }, {} }; MODULE_DEVICE_TABLE(of, mpc52xx_spi_match); static struct of_platform_driver mpc52xx_spi_of_driver = { .driver = { .name = "mpc52xx-spi", .owner = THIS_MODULE, .of_match_table = mpc52xx_spi_match, }, .probe = mpc52xx_spi_probe, .remove = __exit_p(mpc52xx_spi_remove), }; static int __init mpc52xx_spi_init(void) { return of_register_platform_driver(&mpc52xx_spi_of_driver); } module_init(mpc52xx_spi_init); static void __exit mpc52xx_spi_exit(void) { of_unregister_platform_driver(&mpc52xx_spi_of_driver); } module_exit(mpc52xx_spi_exit);