/* * jc42.c - driver for Jedec JC42.4 compliant temperature sensors * * Copyright (c) 2010 Ericsson AB. * * Derived from lm77.c by Andras BALI . * * JC42.4 compliant temperature sensors are typically used on memory modules. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END }; /* JC42 registers. All registers are 16 bit. */ #define JC42_REG_CAP 0x00 #define JC42_REG_CONFIG 0x01 #define JC42_REG_TEMP_UPPER 0x02 #define JC42_REG_TEMP_LOWER 0x03 #define JC42_REG_TEMP_CRITICAL 0x04 #define JC42_REG_TEMP 0x05 #define JC42_REG_MANID 0x06 #define JC42_REG_DEVICEID 0x07 /* Status bits in temperature register */ #define JC42_ALARM_CRIT_BIT 15 #define JC42_ALARM_MAX_BIT 14 #define JC42_ALARM_MIN_BIT 13 /* Configuration register defines */ #define JC42_CFG_CRIT_ONLY (1 << 2) #define JC42_CFG_TCRIT_LOCK (1 << 6) #define JC42_CFG_EVENT_LOCK (1 << 7) #define JC42_CFG_SHUTDOWN (1 << 8) #define JC42_CFG_HYST_SHIFT 9 #define JC42_CFG_HYST_MASK (0x03 << 9) /* Capabilities */ #define JC42_CAP_RANGE (1 << 2) /* Manufacturer IDs */ #define ADT_MANID 0x11d4 /* Analog Devices */ #define ATMEL_MANID 0x001f /* Atmel */ #define MAX_MANID 0x004d /* Maxim */ #define IDT_MANID 0x00b3 /* IDT */ #define MCP_MANID 0x0054 /* Microchip */ #define NXP_MANID 0x1131 /* NXP Semiconductors */ #define ONS_MANID 0x1b09 /* ON Semiconductor */ #define STM_MANID 0x104a /* ST Microelectronics */ /* Supported chips */ /* Analog Devices */ #define ADT7408_DEVID 0x0801 #define ADT7408_DEVID_MASK 0xffff /* Atmel */ #define AT30TS00_DEVID 0x8201 #define AT30TS00_DEVID_MASK 0xffff /* IDT */ #define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */ #define TS3000B3_DEVID_MASK 0xffff #define TS3000GB2_DEVID 0x2912 /* Also matches TSE2002GB2 */ #define TS3000GB2_DEVID_MASK 0xffff /* Maxim */ #define MAX6604_DEVID 0x3e00 #define MAX6604_DEVID_MASK 0xffff /* Microchip */ #define MCP9804_DEVID 0x0200 #define MCP9804_DEVID_MASK 0xfffc #define MCP98242_DEVID 0x2000 #define MCP98242_DEVID_MASK 0xfffc #define MCP98243_DEVID 0x2100 #define MCP98243_DEVID_MASK 0xfffc #define MCP98244_DEVID 0x2200 #define MCP98244_DEVID_MASK 0xfffc #define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */ #define MCP9843_DEVID_MASK 0xfffe /* NXP */ #define SE97_DEVID 0xa200 #define SE97_DEVID_MASK 0xfffc #define SE98_DEVID 0xa100 #define SE98_DEVID_MASK 0xfffc /* ON Semiconductor */ #define CAT6095_DEVID 0x0800 /* Also matches CAT34TS02 */ #define CAT6095_DEVID_MASK 0xffe0 /* ST Microelectronics */ #define STTS424_DEVID 0x0101 #define STTS424_DEVID_MASK 0xffff #define STTS424E_DEVID 0x0000 #define STTS424E_DEVID_MASK 0xfffe #define STTS2002_DEVID 0x0300 #define STTS2002_DEVID_MASK 0xffff #define STTS3000_DEVID 0x0200 #define STTS3000_DEVID_MASK 0xffff static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 }; struct jc42_chips { u16 manid; u16 devid; u16 devid_mask; }; static struct jc42_chips jc42_chips[] = { { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK }, { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK }, { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK }, { IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK }, { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK }, { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK }, { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK }, { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK }, { MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK }, { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK }, { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK }, { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK }, { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK }, { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK }, { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK }, { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK }, { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK }, }; /* Each client has this additional data */ struct jc42_data { struct i2c_client *client; struct mutex update_lock; /* protect register access */ bool extended; /* true if extended range supported */ bool valid; unsigned long last_updated; /* In jiffies */ u16 orig_config; /* original configuration */ u16 config; /* current configuration */ u16 temp_input; /* Temperatures */ u16 temp_crit; u16 temp_min; u16 temp_max; }; #define JC42_TEMP_MIN_EXTENDED (-40000) #define JC42_TEMP_MIN 0 #define JC42_TEMP_MAX 125000 static u16 jc42_temp_to_reg(int temp, bool extended) { int ntemp = clamp_val(temp, extended ? JC42_TEMP_MIN_EXTENDED : JC42_TEMP_MIN, JC42_TEMP_MAX); /* convert from 0.001 to 0.0625 resolution */ return (ntemp * 2 / 125) & 0x1fff; } static int jc42_temp_from_reg(s16 reg) { reg &= 0x1fff; /* sign extend register */ if (reg & 0x1000) reg |= 0xf000; /* convert from 0.0625 to 0.001 resolution */ return reg * 125 / 2; } static struct jc42_data *jc42_update_device(struct device *dev) { struct jc42_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; struct jc42_data *ret = data; int val; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP); if (val < 0) { ret = ERR_PTR(val); goto abort; } data->temp_input = val; val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_CRITICAL); if (val < 0) { ret = ERR_PTR(val); goto abort; } data->temp_crit = val; val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_LOWER); if (val < 0) { ret = ERR_PTR(val); goto abort; } data->temp_min = val; val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_UPPER); if (val < 0) { ret = ERR_PTR(val); goto abort; } data->temp_max = val; data->last_updated = jiffies; data->valid = true; } abort: mutex_unlock(&data->update_lock); return ret; } /* sysfs stuff */ /* read routines for temperature limits */ #define show(value) \ static ssize_t show_##value(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ struct jc42_data *data = jc42_update_device(dev); \ if (IS_ERR(data)) \ return PTR_ERR(data); \ return sprintf(buf, "%d\n", jc42_temp_from_reg(data->value)); \ } show(temp_input); show(temp_crit); show(temp_min); show(temp_max); /* read routines for hysteresis values */ static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute *attr, char *buf) { struct jc42_data *data = jc42_update_device(dev); int temp, hyst; if (IS_ERR(data)) return PTR_ERR(data); temp = jc42_temp_from_reg(data->temp_crit); hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) >> JC42_CFG_HYST_SHIFT]; return sprintf(buf, "%d\n", temp - hyst); } static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute *attr, char *buf) { struct jc42_data *data = jc42_update_device(dev); int temp, hyst; if (IS_ERR(data)) return PTR_ERR(data); temp = jc42_temp_from_reg(data->temp_max); hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) >> JC42_CFG_HYST_SHIFT]; return sprintf(buf, "%d\n", temp - hyst); } /* write routines */ #define set(value, reg) \ static ssize_t set_##value(struct device *dev, \ struct device_attribute *attr, \ const char *buf, size_t count) \ { \ struct jc42_data *data = dev_get_drvdata(dev); \ int err, ret = count; \ long val; \ if (kstrtol(buf, 10, &val) < 0) \ return -EINVAL; \ mutex_lock(&data->update_lock); \ data->value = jc42_temp_to_reg(val, data->extended); \ err = i2c_smbus_write_word_swapped(data->client, reg, data->value); \ if (err < 0) \ ret = err; \ mutex_unlock(&data->update_lock); \ return ret; \ } set(temp_min, JC42_REG_TEMP_LOWER); set(temp_max, JC42_REG_TEMP_UPPER); set(temp_crit, JC42_REG_TEMP_CRITICAL); /* * JC42.4 compliant chips only support four hysteresis values. * Pick best choice and go from there. */ static ssize_t set_temp_crit_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct jc42_data *data = dev_get_drvdata(dev); unsigned long val; int diff, hyst; int err; int ret = count; if (kstrtoul(buf, 10, &val) < 0) return -EINVAL; diff = jc42_temp_from_reg(data->temp_crit) - val; hyst = 0; if (diff > 0) { if (diff < 2250) hyst = 1; /* 1.5 degrees C */ else if (diff < 4500) hyst = 2; /* 3.0 degrees C */ else hyst = 3; /* 6.0 degrees C */ } mutex_lock(&data->update_lock); data->config = (data->config & ~JC42_CFG_HYST_MASK) | (hyst << JC42_CFG_HYST_SHIFT); err = i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, data->config); if (err < 0) ret = err; mutex_unlock(&data->update_lock); return ret; } static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, char *buf) { u16 bit = to_sensor_dev_attr(attr)->index; struct jc42_data *data = jc42_update_device(dev); u16 val; if (IS_ERR(data)) return PTR_ERR(data); val = data->temp_input; if (bit != JC42_ALARM_CRIT_BIT && (data->config & JC42_CFG_CRIT_ONLY)) val = 0; return sprintf(buf, "%u\n", (val >> bit) & 1); } static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, set_temp_crit); static DEVICE_ATTR(temp1_min, S_IRUGO, show_temp_min, set_temp_min); static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, set_temp_max); static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, set_temp_crit_hyst); static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp_max_hyst, NULL); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, JC42_ALARM_CRIT_BIT); static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, JC42_ALARM_MIN_BIT); static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, JC42_ALARM_MAX_BIT); static struct attribute *jc42_attributes[] = { &dev_attr_temp1_input.attr, &dev_attr_temp1_crit.attr, &dev_attr_temp1_min.attr, &dev_attr_temp1_max.attr, &dev_attr_temp1_crit_hyst.attr, &dev_attr_temp1_max_hyst.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, NULL }; static umode_t jc42_attribute_mode(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = container_of(kobj, struct device, kobj); struct jc42_data *data = dev_get_drvdata(dev); unsigned int config = data->config; bool readonly; if (attr == &dev_attr_temp1_crit.attr) readonly = config & JC42_CFG_TCRIT_LOCK; else if (attr == &dev_attr_temp1_min.attr || attr == &dev_attr_temp1_max.attr) readonly = config & JC42_CFG_EVENT_LOCK; else if (attr == &dev_attr_temp1_crit_hyst.attr) readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK); else readonly = true; return S_IRUGO | (readonly ? 0 : S_IWUSR); } static const struct attribute_group jc42_group = { .attrs = jc42_attributes, .is_visible = jc42_attribute_mode, }; __ATTRIBUTE_GROUPS(jc42); /* Return 0 if detection is successful, -ENODEV otherwise */ static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; int i, config, cap, manid, devid; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) return -ENODEV; cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP); config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG); manid = i2c_smbus_read_word_swapped(client, JC42_REG_MANID); devid = i2c_smbus_read_word_swapped(client, JC42_REG_DEVICEID); if (cap < 0 || config < 0 || manid < 0 || devid < 0) return -ENODEV; if ((cap & 0xff00) || (config & 0xf800)) return -ENODEV; for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) { struct jc42_chips *chip = &jc42_chips[i]; if (manid == chip->manid && (devid & chip->devid_mask) == chip->devid) { strlcpy(info->type, "jc42", I2C_NAME_SIZE); return 0; } } return -ENODEV; } static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; struct device *hwmon_dev; struct jc42_data *data; int config, cap; data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL); if (!data) return -ENOMEM; data->client = client; i2c_set_clientdata(client, data); mutex_init(&data->update_lock); cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP); if (cap < 0) return cap; data->extended = !!(cap & JC42_CAP_RANGE); config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG); if (config < 0) return config; data->orig_config = config; if (config & JC42_CFG_SHUTDOWN) { config &= ~JC42_CFG_SHUTDOWN; i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config); } data->config = config; hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, data, jc42_groups); return PTR_ERR_OR_ZERO(hwmon_dev); } static int jc42_remove(struct i2c_client *client) { struct jc42_data *data = i2c_get_clientdata(client); /* Restore original configuration except hysteresis */ if ((data->config & ~JC42_CFG_HYST_MASK) != (data->orig_config & ~JC42_CFG_HYST_MASK)) { int config; config = (data->orig_config & ~JC42_CFG_HYST_MASK) | (data->config & JC42_CFG_HYST_MASK); i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config); } return 0; } #ifdef CONFIG_PM static int jc42_suspend(struct device *dev) { struct jc42_data *data = dev_get_drvdata(dev); data->config |= JC42_CFG_SHUTDOWN; i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, data->config); return 0; } static int jc42_resume(struct device *dev) { struct jc42_data *data = dev_get_drvdata(dev); data->config &= ~JC42_CFG_SHUTDOWN; i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, data->config); return 0; } static const struct dev_pm_ops jc42_dev_pm_ops = { .suspend = jc42_suspend, .resume = jc42_resume, }; #define JC42_DEV_PM_OPS (&jc42_dev_pm_ops) #else #define JC42_DEV_PM_OPS NULL #endif /* CONFIG_PM */ static const struct i2c_device_id jc42_id[] = { { "jc42", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, jc42_id); static struct i2c_driver jc42_driver = { .class = I2C_CLASS_SPD, .driver = { .name = "jc42", .pm = JC42_DEV_PM_OPS, }, .probe = jc42_probe, .remove = jc42_remove, .id_table = jc42_id, .detect = jc42_detect, .address_list = normal_i2c, }; module_i2c_driver(jc42_driver); MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("JC42 driver"); MODULE_LICENSE("GPL");