/* * Copyright (C) 2013 STMicroelectronics Limited * Author: Srinivas Kandagatla * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include #include #include #include struct st_rc_device { struct device *dev; int irq; int irq_wake; struct clk *sys_clock; void *base; /* Register base address */ void *rx_base;/* RX Register base address */ struct rc_dev *rdev; bool overclocking; int sample_mult; int sample_div; bool rxuhfmode; struct reset_control *rstc; }; /* Registers */ #define IRB_SAMPLE_RATE_COMM 0x64 /* sample freq divisor*/ #define IRB_CLOCK_SEL 0x70 /* clock select */ #define IRB_CLOCK_SEL_STATUS 0x74 /* clock status */ /* IRB IR/UHF receiver registers */ #define IRB_RX_ON 0x40 /* pulse time capture */ #define IRB_RX_SYS 0X44 /* sym period capture */ #define IRB_RX_INT_EN 0x48 /* IRQ enable (R/W) */ #define IRB_RX_INT_STATUS 0x4c /* IRQ status (R/W) */ #define IRB_RX_EN 0x50 /* Receive enable */ #define IRB_MAX_SYM_PERIOD 0x54 /* max sym value */ #define IRB_RX_INT_CLEAR 0x58 /* overrun status */ #define IRB_RX_STATUS 0x6c /* receive status */ #define IRB_RX_NOISE_SUPPR 0x5c /* noise suppression */ #define IRB_RX_POLARITY_INV 0x68 /* polarity inverter */ /** * IRQ set: Enable full FIFO 1 -> bit 3; * Enable overrun IRQ 1 -> bit 2; * Enable last symbol IRQ 1 -> bit 1: * Enable RX interrupt 1 -> bit 0; */ #define IRB_RX_INTS 0x0f #define IRB_RX_OVERRUN_INT 0x04 /* maximum symbol period (microsecs),timeout to detect end of symbol train */ #define MAX_SYMB_TIME 0x5000 #define IRB_SAMPLE_FREQ 10000000 #define IRB_FIFO_NOT_EMPTY 0xff00 #define IRB_OVERFLOW 0x4 #define IRB_TIMEOUT 0xffff #define IR_ST_NAME "st-rc" static void st_rc_send_lirc_timeout(struct rc_dev *rdev) { DEFINE_IR_RAW_EVENT(ev); ev.timeout = true; ir_raw_event_store(rdev, &ev); } /** * RX graphical example to better understand the difference between ST IR block * output and standard definition used by LIRC (and most of the world!) * * mark mark * |-IRB_RX_ON-| |-IRB_RX_ON-| * ___ ___ ___ ___ ___ ___ _ * | | | | | | | | | | | | | * | | | | | | space 0 | | | | | | space 1 | * _____| |__| |__| |____________________________| |__| |__| |_____________| * * |--------------- IRB_RX_SYS -------------|------ IRB_RX_SYS -------| * * |------------- encoding bit 0 -----------|---- encoding bit 1 -----| * * ST hardware returns mark (IRB_RX_ON) and total symbol time (IRB_RX_SYS), so * convert to standard mark/space we have to calculate space=(IRB_RX_SYS-mark) * The mark time represents the amount of time the carrier (usually 36-40kHz) * is detected.The above examples shows Pulse Width Modulation encoding where * bit 0 is represented by space>mark. */ static irqreturn_t st_rc_rx_interrupt(int irq, void *data) { unsigned int symbol, mark = 0; struct st_rc_device *dev = data; int last_symbol = 0; u32 status; DEFINE_IR_RAW_EVENT(ev); if (dev->irq_wake) pm_wakeup_event(dev->dev, 0); status = readl(dev->rx_base + IRB_RX_STATUS); while (status & (IRB_FIFO_NOT_EMPTY | IRB_OVERFLOW)) { u32 int_status = readl(dev->rx_base + IRB_RX_INT_STATUS); if (unlikely(int_status & IRB_RX_OVERRUN_INT)) { /* discard the entire collection in case of errors! */ ir_raw_event_reset(dev->rdev); dev_info(dev->dev, "IR RX overrun\n"); writel(IRB_RX_OVERRUN_INT, dev->rx_base + IRB_RX_INT_CLEAR); continue; } symbol = readl(dev->rx_base + IRB_RX_SYS); mark = readl(dev->rx_base + IRB_RX_ON); if (symbol == IRB_TIMEOUT) last_symbol = 1; /* Ignore any noise */ if ((mark > 2) && (symbol > 1)) { symbol -= mark; if (dev->overclocking) { /* adjustments to timings */ symbol *= dev->sample_mult; symbol /= dev->sample_div; mark *= dev->sample_mult; mark /= dev->sample_div; } ev.duration = US_TO_NS(mark); ev.pulse = true; ir_raw_event_store(dev->rdev, &ev); if (!last_symbol) { ev.duration = US_TO_NS(symbol); ev.pulse = false; ir_raw_event_store(dev->rdev, &ev); } else { st_rc_send_lirc_timeout(dev->rdev); } } last_symbol = 0; status = readl(dev->rx_base + IRB_RX_STATUS); } writel(IRB_RX_INTS, dev->rx_base + IRB_RX_INT_CLEAR); /* Empty software fifo */ ir_raw_event_handle(dev->rdev); return IRQ_HANDLED; } static void st_rc_hardware_init(struct st_rc_device *dev) { int baseclock, freqdiff; unsigned int rx_max_symbol_per = MAX_SYMB_TIME; unsigned int rx_sampling_freq_div; /* Enable the IP */ if (dev->rstc) reset_control_deassert(dev->rstc); clk_prepare_enable(dev->sys_clock); baseclock = clk_get_rate(dev->sys_clock); /* IRB input pins are inverted internally from high to low. */ writel(1, dev->rx_base + IRB_RX_POLARITY_INV); rx_sampling_freq_div = baseclock / IRB_SAMPLE_FREQ; writel(rx_sampling_freq_div, dev->base + IRB_SAMPLE_RATE_COMM); freqdiff = baseclock - (rx_sampling_freq_div * IRB_SAMPLE_FREQ); if (freqdiff) { /* over clocking, workout the adjustment factors */ dev->overclocking = true; dev->sample_mult = 1000; dev->sample_div = baseclock / (10000 * rx_sampling_freq_div); rx_max_symbol_per = (rx_max_symbol_per * 1000)/dev->sample_div; } writel(rx_max_symbol_per, dev->rx_base + IRB_MAX_SYM_PERIOD); } static int st_rc_remove(struct platform_device *pdev) { struct st_rc_device *rc_dev = platform_get_drvdata(pdev); clk_disable_unprepare(rc_dev->sys_clock); rc_unregister_device(rc_dev->rdev); return 0; } static int st_rc_open(struct rc_dev *rdev) { struct st_rc_device *dev = rdev->priv; unsigned long flags; local_irq_save(flags); /* enable interrupts and receiver */ writel(IRB_RX_INTS, dev->rx_base + IRB_RX_INT_EN); writel(0x01, dev->rx_base + IRB_RX_EN); local_irq_restore(flags); return 0; } static void st_rc_close(struct rc_dev *rdev) { struct st_rc_device *dev = rdev->priv; /* disable interrupts and receiver */ writel(0x00, dev->rx_base + IRB_RX_EN); writel(0x00, dev->rx_base + IRB_RX_INT_EN); } static int st_rc_probe(struct platform_device *pdev) { int ret = -EINVAL; struct rc_dev *rdev; struct device *dev = &pdev->dev; struct resource *res; struct st_rc_device *rc_dev; struct device_node *np = pdev->dev.of_node; const char *rx_mode; rc_dev = devm_kzalloc(dev, sizeof(struct st_rc_device), GFP_KERNEL); if (!rc_dev) return -ENOMEM; rdev = rc_allocate_device(); if (!rdev) return -ENOMEM; if (np && !of_property_read_string(np, "rx-mode", &rx_mode)) { if (!strcmp(rx_mode, "uhf")) { rc_dev->rxuhfmode = true; } else if (!strcmp(rx_mode, "infrared")) { rc_dev->rxuhfmode = false; } else { dev_err(dev, "Unsupported rx mode [%s]\n", rx_mode); goto err; } } else { goto err; } rc_dev->sys_clock = devm_clk_get(dev, NULL); if (IS_ERR(rc_dev->sys_clock)) { dev_err(dev, "System clock not found\n"); ret = PTR_ERR(rc_dev->sys_clock); goto err; } rc_dev->irq = platform_get_irq(pdev, 0); if (rc_dev->irq < 0) { ret = rc_dev->irq; goto err; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); rc_dev->base = devm_ioremap_resource(dev, res); if (IS_ERR(rc_dev->base)) { ret = PTR_ERR(rc_dev->base); goto err; } if (rc_dev->rxuhfmode) rc_dev->rx_base = rc_dev->base + 0x40; else rc_dev->rx_base = rc_dev->base; rc_dev->rstc = reset_control_get_optional(dev, NULL); if (IS_ERR(rc_dev->rstc)) rc_dev->rstc = NULL; rc_dev->dev = dev; platform_set_drvdata(pdev, rc_dev); st_rc_hardware_init(rc_dev); rdev->driver_type = RC_DRIVER_IR_RAW; rdev->allowed_protocols = RC_BIT_ALL; /* rx sampling rate is 10Mhz */ rdev->rx_resolution = 100; rdev->timeout = US_TO_NS(MAX_SYMB_TIME); rdev->priv = rc_dev; rdev->open = st_rc_open; rdev->close = st_rc_close; rdev->driver_name = IR_ST_NAME; rdev->map_name = RC_MAP_LIRC; rdev->input_name = "ST Remote Control Receiver"; /* enable wake via this device */ device_set_wakeup_capable(dev, true); device_set_wakeup_enable(dev, true); ret = rc_register_device(rdev); if (ret < 0) goto clkerr; rc_dev->rdev = rdev; if (devm_request_irq(dev, rc_dev->irq, st_rc_rx_interrupt, IRQF_NO_SUSPEND, IR_ST_NAME, rc_dev) < 0) { dev_err(dev, "IRQ %d register failed\n", rc_dev->irq); ret = -EINVAL; goto rcerr; } /** * for LIRC_MODE_MODE2 or LIRC_MODE_PULSE or LIRC_MODE_RAW * lircd expects a long space first before a signal train to sync. */ st_rc_send_lirc_timeout(rdev); dev_info(dev, "setup in %s mode\n", rc_dev->rxuhfmode ? "UHF" : "IR"); return ret; rcerr: rc_unregister_device(rdev); rdev = NULL; clkerr: clk_disable_unprepare(rc_dev->sys_clock); err: rc_free_device(rdev); dev_err(dev, "Unable to register device (%d)\n", ret); return ret; } #ifdef CONFIG_PM static int st_rc_suspend(struct device *dev) { struct st_rc_device *rc_dev = dev_get_drvdata(dev); if (device_may_wakeup(dev)) { if (!enable_irq_wake(rc_dev->irq)) rc_dev->irq_wake = 1; else return -EINVAL; } else { pinctrl_pm_select_sleep_state(dev); writel(0x00, rc_dev->rx_base + IRB_RX_EN); writel(0x00, rc_dev->rx_base + IRB_RX_INT_EN); clk_disable_unprepare(rc_dev->sys_clock); if (rc_dev->rstc) reset_control_assert(rc_dev->rstc); } return 0; } static int st_rc_resume(struct device *dev) { struct st_rc_device *rc_dev = dev_get_drvdata(dev); struct rc_dev *rdev = rc_dev->rdev; if (rc_dev->irq_wake) { disable_irq_wake(rc_dev->irq); rc_dev->irq_wake = 0; } else { pinctrl_pm_select_default_state(dev); st_rc_hardware_init(rc_dev); if (rdev->users) { writel(IRB_RX_INTS, rc_dev->rx_base + IRB_RX_INT_EN); writel(0x01, rc_dev->rx_base + IRB_RX_EN); } } return 0; } #endif static SIMPLE_DEV_PM_OPS(st_rc_pm_ops, st_rc_suspend, st_rc_resume); #ifdef CONFIG_OF static struct of_device_id st_rc_match[] = { { .compatible = "st,comms-irb", }, {}, }; MODULE_DEVICE_TABLE(of, st_rc_match); #endif static struct platform_driver st_rc_driver = { .driver = { .name = IR_ST_NAME, .owner = THIS_MODULE, .of_match_table = of_match_ptr(st_rc_match), .pm = &st_rc_pm_ops, }, .probe = st_rc_probe, .remove = st_rc_remove, }; module_platform_driver(st_rc_driver); MODULE_DESCRIPTION("RC Transceiver driver for STMicroelectronics platforms"); MODULE_AUTHOR("STMicroelectronics (R&D) Ltd"); MODULE_LICENSE("GPL");