/* * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device * * Modified to new api Jan 2001 by James Simmons (jsimmons@transvirtual.com) * * Created 28 Dec 1997 by Geert Uytterhoeven * * * I have started rewriting this driver as a example of the upcoming new API * The primary goal is to remove the console code from fbdev and place it * into fbcon.c. This reduces the code and makes writing a new fbdev driver * easy since the author doesn't need to worry about console internals. It * also allows the ability to run fbdev without a console/tty system on top * of it. * * First the roles of struct fb_info and struct display have changed. Struct * display will go away. The way the new framebuffer console code will * work is that it will act to translate data about the tty/console in * struct vc_data to data in a device independent way in struct fb_info. Then * various functions in struct fb_ops will be called to store the device * dependent state in the par field in struct fb_info and to change the * hardware to that state. This allows a very clean separation of the fbdev * layer from the console layer. It also allows one to use fbdev on its own * which is a bounus for embedded devices. The reason this approach works is * for each framebuffer device when used as a tty/console device is allocated * a set of virtual terminals to it. Only one virtual terminal can be active * per framebuffer device. We already have all the data we need in struct * vc_data so why store a bunch of colormaps and other fbdev specific data * per virtual terminal. * * As you can see doing this makes the con parameter pretty much useless * for struct fb_ops functions, as it should be. Also having struct * fb_var_screeninfo and other data in fb_info pretty much eliminates the * need for get_fix and get_var. Once all drivers use the fix, var, and cmap * fbcon can be written around these fields. This will also eliminate the * need to regenerate struct fb_var_screeninfo, struct fb_fix_screeninfo * struct fb_cmap every time get_var, get_fix, get_cmap functions are called * as many drivers do now. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/pci.h> /* * This is just simple sample code. * * No warranty that it actually compiles. * Even less warranty that it actually works :-) */ /* * Driver data */ static char *mode_option __devinitdata; /* * If your driver supports multiple boards, you should make the * below data types arrays, or allocate them dynamically (using kmalloc()). */ /* * This structure defines the hardware state of the graphics card. Normally * you place this in a header file in linux/include/video. This file usually * also includes register information. That allows other driver subsystems * and userland applications the ability to use the same header file to * avoid duplicate work and easy porting of software. */ struct xxx_par; /* * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo * if we don't use modedb. If we do use modedb see xxxfb_init how to use it * to get a fb_var_screeninfo. Otherwise define a default var as well. */ static struct fb_fix_screeninfo xxxfb_fix __devinitdata = { .id = "FB's name", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, .xpanstep = 1, .ypanstep = 1, .ywrapstep = 1, .accel = FB_ACCEL_NONE, }; /* * Modern graphical hardware not only supports pipelines but some * also support multiple monitors where each display can have its * its own unique data. In this case each display could be * represented by a separate framebuffer device thus a separate * struct fb_info. Now the struct xxx_par represents the graphics * hardware state thus only one exist per card. In this case the * struct xxx_par for each graphics card would be shared between * every struct fb_info that represents a framebuffer on that card. * This allows when one display changes it video resolution (info->var) * the other displays know instantly. Each display can always be * aware of the entire hardware state that affects it because they share * the same xxx_par struct. The other side of the coin is multiple * graphics cards that pass data around until it is finally displayed * on one monitor. Such examples are the voodoo 1 cards and high end * NUMA graphics servers. For this case we have a bunch of pars, each * one that represents a graphics state, that belong to one struct * fb_info. Their you would want to have *par point to a array of device * states and have each struct fb_ops function deal with all those * states. I hope this covers every possible hardware design. If not * feel free to send your ideas at jsimmons@users.sf.net */ /* * If your driver supports multiple boards or it supports multiple * framebuffers, you should make these arrays, or allocate them * dynamically using framebuffer_alloc() and free them with * framebuffer_release(). */ static struct fb_info info; /* * Each one represents the state of the hardware. Most hardware have * just one hardware state. These here represent the default state(s). */ static struct xxx_par __initdata current_par; int xxxfb_init(void); /** * xxxfb_open - Optional function. Called when the framebuffer is * first accessed. * @info: frame buffer structure that represents a single frame buffer * @user: tell us if the userland (value=1) or the console is accessing * the framebuffer. * * This function is the first function called in the framebuffer api. * Usually you don't need to provide this function. The case where it * is used is to change from a text mode hardware state to a graphics * mode state. * * Returns negative errno on error, or zero on success. */ static int xxxfb_open(struct fb_info *info, int user) { return 0; } /** * xxxfb_release - Optional function. Called when the framebuffer * device is closed. * @info: frame buffer structure that represents a single frame buffer * @user: tell us if the userland (value=1) or the console is accessing * the framebuffer. * * Thus function is called when we close /dev/fb or the framebuffer * console system is released. Usually you don't need this function. * The case where it is usually used is to go from a graphics state * to a text mode state. * * Returns negative errno on error, or zero on success. */ static int xxxfb_release(struct fb_info *info, int user) { return 0; } /** * xxxfb_check_var - Optional function. Validates a var passed in. * @var: frame buffer variable screen structure * @info: frame buffer structure that represents a single frame buffer * * Checks to see if the hardware supports the state requested by * var passed in. This function does not alter the hardware state!!! * This means the data stored in struct fb_info and struct xxx_par do * not change. This includes the var inside of struct fb_info. * Do NOT change these. This function can be called on its own if we * intent to only test a mode and not actually set it. The stuff in * modedb.c is a example of this. If the var passed in is slightly * off by what the hardware can support then we alter the var PASSED in * to what we can do. * * For values that are off, this function must round them _up_ to the * next value that is supported by the hardware. If the value is * greater than the highest value supported by the hardware, then this * function must return -EINVAL. * * Exception to the above rule: Some drivers have a fixed mode, ie, * the hardware is already set at boot up, and cannot be changed. In * this case, it is more acceptable that this function just return * a copy of the currently working var (info->var). Better is to not * implement this function, as the upper layer will do the copying * of the current var for you. * * Note: This is the only function where the contents of var can be * freely adjusted after the driver has been registered. If you find * that you have code outside of this function that alters the content * of var, then you are doing something wrong. Note also that the * contents of info->var must be left untouched at all times after * driver registration. * * Returns negative errno on error, or zero on success. */ static int xxxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { /* ... */ return 0; } /** * xxxfb_set_par - Optional function. Alters the hardware state. * @info: frame buffer structure that represents a single frame buffer * * Using the fb_var_screeninfo in fb_info we set the resolution of the * this particular framebuffer. This function alters the par AND the * fb_fix_screeninfo stored in fb_info. It doesn't not alter var in * fb_info since we are using that data. This means we depend on the * data in var inside fb_info to be supported by the hardware. * * This function is also used to recover/restore the hardware to a * known working state. * * xxxfb_check_var is always called before xxxfb_set_par to ensure that * the contents of var is always valid. * * Again if you can't change the resolution you don't need this function. * * However, even if your hardware does not support mode changing, * a set_par might be needed to at least initialize the hardware to * a known working state, especially if it came back from another * process that also modifies the same hardware, such as X. * * If this is the case, a combination such as the following should work: * * static int xxxfb_check_var(struct fb_var_screeninfo *var, * struct fb_info *info) * { * *var = info->var; * return 0; * } * * static int xxxfb_set_par(struct fb_info *info) * { * init your hardware here * } * * Returns negative errno on error, or zero on success. */ static int xxxfb_set_par(struct fb_info *info) { struct xxx_par *par = info->par; /* ... */ return 0; } /** * xxxfb_setcolreg - Optional function. Sets a color register. * @regno: Which register in the CLUT we are programming * @red: The red value which can be up to 16 bits wide * @green: The green value which can be up to 16 bits wide * @blue: The blue value which can be up to 16 bits wide. * @transp: If supported, the alpha value which can be up to 16 bits wide. * @info: frame buffer info structure * * Set a single color register. The values supplied have a 16 bit * magnitude which needs to be scaled in this function for the hardware. * Things to take into consideration are how many color registers, if * any, are supported with the current color visual. With truecolor mode * no color palettes are supported. Here a pseudo palette is created * which we store the value in pseudo_palette in struct fb_info. For * pseudocolor mode we have a limited color palette. To deal with this * we can program what color is displayed for a particular pixel value. * DirectColor is similar in that we can program each color field. If * we have a static colormap we don't need to implement this function. * * Returns negative errno on error, or zero on success. */ static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *info) { if (regno >= 256) /* no. of hw registers */ return -EINVAL; /* * Program hardware... do anything you want with transp */ /* grayscale works only partially under directcolor */ if (info->var.grayscale) { /* grayscale = 0.30*R + 0.59*G + 0.11*B */ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; } /* Directcolor: * var->{color}.offset contains start of bitfield * var->{color}.length contains length of bitfield * {hardwarespecific} contains width of DAC * pseudo_palette[X] is programmed to (X << red.offset) | * (X << green.offset) | * (X << blue.offset) * RAMDAC[X] is programmed to (red, green, blue) * color depth = SUM(var->{color}.length) * * Pseudocolor: * var->{color}.offset is 0 unless the palette index takes less than * bits_per_pixel bits and is stored in the upper * bits of the pixel value * var->{color}.length is set so that 1 << length is the number of * available palette entries * pseudo_palette is not used * RAMDAC[X] is programmed to (red, green, blue) * color depth = var->{color}.length * * Static pseudocolor: * same as Pseudocolor, but the RAMDAC is not programmed (read-only) * * Mono01/Mono10: * Has only 2 values, black on white or white on black (fg on bg), * var->{color}.offset is 0 * white = (1 << var->{color}.length) - 1, black = 0 * pseudo_palette is not used * RAMDAC does not exist * color depth is always 2 * * Truecolor: * does not use RAMDAC (usually has 3 of them). * var->{color}.offset contains start of bitfield * var->{color}.length contains length of bitfield * pseudo_palette is programmed to (red << red.offset) | * (green << green.offset) | * (blue << blue.offset) | * (transp << transp.offset) * RAMDAC does not exist * color depth = SUM(var->{color}.length}) * * The color depth is used by fbcon for choosing the logo and also * for color palette transformation if color depth < 4 * * As can be seen from the above, the field bits_per_pixel is _NOT_ * a criteria for describing the color visual. * * A common mistake is assuming that bits_per_pixel <= 8 is pseudocolor, * and higher than that, true/directcolor. This is incorrect, one needs * to look at the fix->visual. * * Another common mistake is using bits_per_pixel to calculate the color * depth. The bits_per_pixel field does not directly translate to color * depth. You have to compute for the color depth (using the color * bitfields) and fix->visual as seen above. */ /* * This is the point where the color is converted to something that * is acceptable by the hardware. */ #define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16) red = CNVT_TOHW(red, info->var.red.length); green = CNVT_TOHW(green, info->var.green.length); blue = CNVT_TOHW(blue, info->var.blue.length); transp = CNVT_TOHW(transp, info->var.transp.length); #undef CNVT_TOHW /* * This is the point where the function feeds the color to the hardware * palette after converting the colors to something acceptable by * the hardware. Note, only FB_VISUAL_DIRECTCOLOR and * FB_VISUAL_PSEUDOCOLOR visuals need to write to the hardware palette. * If you have code that writes to the hardware CLUT, and it's not * any of the above visuals, then you are doing something wrong. */ if (info->fix.visual == FB_VISUAL_DIRECTCOLOR || info->fix.visual == FB_VISUAL_TRUECOLOR) write_{red|green|blue|transp}_to_clut(); /* This is the point were you need to fill up the contents of * info->pseudo_palette. This structure is used _only_ by fbcon, thus * it only contains 16 entries to match the number of colors supported * by the console. The pseudo_palette is used only if the visual is * in directcolor or truecolor mode. With other visuals, the * pseudo_palette is not used. (This might change in the future.) * * The contents of the pseudo_palette is in raw pixel format. Ie, each * entry can be written directly to the framebuffer without any conversion. * The pseudo_palette is (void *). However, if using the generic * drawing functions (cfb_imageblit, cfb_fillrect), the pseudo_palette * must be casted to (u32 *) _regardless_ of the bits per pixel. If the * driver is using its own drawing functions, then it can use whatever * size it wants. */ if (info->fix.visual == FB_VISUAL_TRUECOLOR || info->fix.visual == FB_VISUAL_DIRECTCOLOR) { u32 v; if (regno >= 16) return -EINVAL; v = (red << info->var.red.offset) | (green << info->var.green.offset) | (blue << info->var.blue.offset) | (transp << info->var.transp.offset); ((u32*)(info->pseudo_palette))[regno] = v; } /* ... */ return 0; } /** * xxxfb_pan_display - NOT a required function. Pans the display. * @var: frame buffer variable screen structure * @info: frame buffer structure that represents a single frame buffer * * Pan (or wrap, depending on the `vmode' field) the display using the * `xoffset' and `yoffset' fields of the `var' structure. * If the values don't fit, return -EINVAL. * * Returns negative errno on error, or zero on success. */ static int xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) { /* * If your hardware does not support panning, _do_ _not_ implement this * function. Creating a dummy function will just confuse user apps. */ /* * Note that even if this function is fully functional, a setting of * 0 in both xpanstep and ypanstep means that this function will never * get called. */ /* ... */ return 0; } /** * xxxfb_blank - NOT a required function. Blanks the display. * @blank_mode: the blank mode we want. * @info: frame buffer structure that represents a single frame buffer * * Blank the screen if blank_mode != FB_BLANK_UNBLANK, else unblank. * Return 0 if blanking succeeded, != 0 if un-/blanking failed due to * e.g. a video mode which doesn't support it. * * Implements VESA suspend and powerdown modes on hardware that supports * disabling hsync/vsync: * * FB_BLANK_NORMAL = display is blanked, syncs are on. * FB_BLANK_HSYNC_SUSPEND = hsync off * FB_BLANK_VSYNC_SUSPEND = vsync off * FB_BLANK_POWERDOWN = hsync and vsync off * * If implementing this function, at least support FB_BLANK_UNBLANK. * Return !0 for any modes that are unimplemented. * */ static int xxxfb_blank(int blank_mode, struct fb_info *info) { /* ... */ return 0; } /* ------------ Accelerated Functions --------------------- */ /* * We provide our own functions if we have hardware acceleration * or non packed pixel format layouts. If we have no hardware * acceleration, we can use a generic unaccelerated function. If using * a pack pixel format just use the functions in cfb_*.c. Each file * has one of the three different accel functions we support. */ /** * xxxfb_fillrect - REQUIRED function. Can use generic routines if * non acclerated hardware and packed pixel based. * Draws a rectangle on the screen. * * @info: frame buffer structure that represents a single frame buffer * @region: The structure representing the rectangular region we * wish to draw to. * * This drawing operation places/removes a retangle on the screen * depending on the rastering operation with the value of color which * is in the current color depth format. */ void xxxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region) { /* Meaning of struct fb_fillrect * * @dx: The x and y corrdinates of the upper left hand corner of the * @dy: area we want to draw to. * @width: How wide the rectangle is we want to draw. * @height: How tall the rectangle is we want to draw. * @color: The color to fill in the rectangle with. * @rop: The raster operation. We can draw the rectangle with a COPY * of XOR which provides erasing effect. */ } /** * xxxfb_copyarea - REQUIRED function. Can use generic routines if * non acclerated hardware and packed pixel based. * Copies one area of the screen to another area. * * @info: frame buffer structure that represents a single frame buffer * @area: Structure providing the data to copy the framebuffer contents * from one region to another. * * This drawing operation copies a rectangular area from one area of the * screen to another area. */ void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area) { /* * @dx: The x and y coordinates of the upper left hand corner of the * @dy: destination area on the screen. * @width: How wide the rectangle is we want to copy. * @height: How tall the rectangle is we want to copy. * @sx: The x and y coordinates of the upper left hand corner of the * @sy: source area on the screen. */ } /** * xxxfb_imageblit - REQUIRED function. Can use generic routines if * non acclerated hardware and packed pixel based. * Copies a image from system memory to the screen. * * @info: frame buffer structure that represents a single frame buffer * @image: structure defining the image. * * This drawing operation draws a image on the screen. It can be a * mono image (needed for font handling) or a color image (needed for * tux). */ void xxxfb_imageblit(struct fb_info *p, const struct fb_image *image) { /* * @dx: The x and y coordinates of the upper left hand corner of the * @dy: destination area to place the image on the screen. * @width: How wide the image is we want to copy. * @height: How tall the image is we want to copy. * @fg_color: For mono bitmap images this is color data for * @bg_color: the foreground and background of the image to * write directly to the frmaebuffer. * @depth: How many bits represent a single pixel for this image. * @data: The actual data used to construct the image on the display. * @cmap: The colormap used for color images. */ /* * The generic function, cfb_imageblit, expects that the bitmap scanlines are * padded to the next byte. Most hardware accelerators may require padding to * the next u16 or the next u32. If that is the case, the driver can specify * this by setting info->pixmap.scan_align = 2 or 4. See a more * comprehensive description of the pixmap below. */ } /** * xxxfb_cursor - OPTIONAL. If your hardware lacks support * for a cursor, leave this field NULL. * * @info: frame buffer structure that represents a single frame buffer * @cursor: structure defining the cursor to draw. * * This operation is used to set or alter the properities of the * cursor. * * Returns negative errno on error, or zero on success. */ int xxxfb_cursor(struct fb_info *info, struct fb_cursor *cursor) { /* * @set: Which fields we are altering in struct fb_cursor * @enable: Disable or enable the cursor * @rop: The bit operation we want to do. * @mask: This is the cursor mask bitmap. * @dest: A image of the area we are going to display the cursor. * Used internally by the driver. * @hot: The hot spot. * @image: The actual data for the cursor image. * * NOTES ON FLAGS (cursor->set): * * FB_CUR_SETIMAGE - the cursor image has changed (cursor->image.data) * FB_CUR_SETPOS - the cursor position has changed (cursor->image.dx|dy) * FB_CUR_SETHOT - the cursor hot spot has changed (cursor->hot.dx|dy) * FB_CUR_SETCMAP - the cursor colors has changed (cursor->fg_color|bg_color) * FB_CUR_SETSHAPE - the cursor bitmask has changed (cursor->mask) * FB_CUR_SETSIZE - the cursor size has changed (cursor->width|height) * FB_CUR_SETALL - everything has changed * * NOTES ON ROPs (cursor->rop, Raster Operation) * * ROP_XOR - cursor->image.data XOR cursor->mask * ROP_COPY - curosr->image.data AND cursor->mask * * OTHER NOTES: * * - fbcon only supports a 2-color cursor (cursor->image.depth = 1) * - The fb_cursor structure, @cursor, _will_ always contain valid * fields, whether any particular bitfields in cursor->set is set * or not. */ } /** * xxxfb_rotate - NOT a required function. If your hardware * supports rotation the whole screen then * you would provide a hook for this. * * @info: frame buffer structure that represents a single frame buffer * @angle: The angle we rotate the screen. * * This operation is used to set or alter the properities of the * cursor. */ void xxxfb_rotate(struct fb_info *info, int angle) { /* Will be deprecated */ } /** * xxxfb_sync - NOT a required function. Normally the accel engine * for a graphics card take a specific amount of time. * Often we have to wait for the accelerator to finish * its operation before we can write to the framebuffer * so we can have consistent display output. * * @info: frame buffer structure that represents a single frame buffer * * If the driver has implemented its own hardware-based drawing function, * implementing this function is highly recommended. */ int xxxfb_sync(struct fb_info *info) { return 0; } /* * Frame buffer operations */ static struct fb_ops xxxfb_ops = { .owner = THIS_MODULE, .fb_open = xxxfb_open, .fb_read = xxxfb_read, .fb_write = xxxfb_write, .fb_release = xxxfb_release, .fb_check_var = xxxfb_check_var, .fb_set_par = xxxfb_set_par, .fb_setcolreg = xxxfb_setcolreg, .fb_blank = xxxfb_blank, .fb_pan_display = xxxfb_pan_display, .fb_fillrect = xxxfb_fillrect, /* Needed !!! */ .fb_copyarea = xxxfb_copyarea, /* Needed !!! */ .fb_imageblit = xxxfb_imageblit, /* Needed !!! */ .fb_cursor = xxxfb_cursor, /* Optional !!! */ .fb_rotate = xxxfb_rotate, .fb_sync = xxxfb_sync, .fb_ioctl = xxxfb_ioctl, .fb_mmap = xxxfb_mmap, }; /* ------------------------------------------------------------------------- */ /* * Initialization */ /* static int __init xxfb_probe (struct platform_device *pdev) -- for platform devs */ static int __devinit xxxfb_probe(struct pci_dev *dev, const struct pci_device_id *ent) { struct fb_info *info; struct xxx_par *par; struct device *device = &dev->dev; /* or &pdev->dev */ int cmap_len, retval; /* * Dynamically allocate info and par */ info = framebuffer_alloc(sizeof(struct xxx_par), device); if (!info) { /* goto error path */ } par = info->par; /* * Here we set the screen_base to the virtual memory address * for the framebuffer. Usually we obtain the resource address * from the bus layer and then translate it to virtual memory * space via ioremap. Consult ioport.h. */ info->screen_base = framebuffer_virtual_memory; info->fbops = &xxxfb_ops; info->fix = xxxfb_fix; /* this will be the only time xxxfb_fix will be * used, so mark it as __devinitdata */ info->pseudo_palette = pseudo_palette; /* The pseudopalette is an * 16-member array */ /* * Set up flags to indicate what sort of acceleration your * driver can provide (pan/wrap/copyarea/etc.) and whether it * is a module -- see FBINFO_* in include/linux/fb.h * * If your hardware can support any of the hardware accelerated functions * fbcon performance will improve if info->flags is set properly. * * FBINFO_HWACCEL_COPYAREA - hardware moves * FBINFO_HWACCEL_FILLRECT - hardware fills * FBINFO_HWACCEL_IMAGEBLIT - hardware mono->color expansion * FBINFO_HWACCEL_YPAN - hardware can pan display in y-axis * FBINFO_HWACCEL_YWRAP - hardware can wrap display in y-axis * FBINFO_HWACCEL_DISABLED - supports hardware accels, but disabled * FBINFO_READS_FAST - if set, prefer moves over mono->color expansion * FBINFO_MISC_TILEBLITTING - hardware can do tile blits * * NOTE: These are for fbcon use only. */ info->flags = FBINFO_DEFAULT; /********************* This stage is optional ******************************/ /* * The struct pixmap is a scratch pad for the drawing functions. This * is where the monochrome bitmap is constructed by the higher layers * and then passed to the accelerator. For drivers that uses * cfb_imageblit, you can skip this part. For those that have a more * rigorous requirement, this stage is needed */ /* PIXMAP_SIZE should be small enough to optimize drawing, but not * large enough that memory is wasted. A safe size is * (max_xres * max_font_height/8). max_xres is driver dependent, * max_font_height is 32. */ info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL); if (!info->pixmap.addr) { /* goto error */ } info->pixmap.size = PIXMAP_SIZE; /* * FB_PIXMAP_SYSTEM - memory is in system ram * FB_PIXMAP_IO - memory is iomapped * FB_PIXMAP_SYNC - if set, will call fb_sync() per access to pixmap, * usually if FB_PIXMAP_IO is set. * * Currently, FB_PIXMAP_IO is unimplemented. */ info->pixmap.flags = FB_PIXMAP_SYSTEM; /* * scan_align is the number of padding for each scanline. It is in bytes. * Thus for accelerators that need padding to the next u32, put 4 here. */ info->pixmap.scan_align = 4; /* * buf_align is the amount to be padded for the buffer. For example, * the i810fb needs a scan_align of 2 but expects it to be fed with * dwords, so a buf_align = 4 is required. */ info->pixmap.buf_align = 4; /* access_align is how many bits can be accessed from the framebuffer * ie. some epson cards allow 16-bit access only. Most drivers will * be safe with u32 here. * * NOTE: This field is currently unused. */ info->pixmap.access_align = 32; /***************************** End optional stage ***************************/ /* * This should give a reasonable default video mode. The following is * done when we can set a video mode. */ if (!mode_option) mode_option = "640x480@60"; retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8); if (!retval || retval == 4) return -EINVAL; /* This has to be done! */ if (fb_alloc_cmap(&info->cmap, cmap_len, 0)) return -ENOMEM; /* * The following is done in the case of having hardware with a static * mode. If we are setting the mode ourselves we don't call this. */ info->var = xxxfb_var; /* * For drivers that can... */ xxxfb_check_var(&info->var, info); /* * Does a call to fb_set_par() before register_framebuffer needed? This * will depend on you and the hardware. If you are sure that your driver * is the only device in the system, a call to fb_set_par() is safe. * * Hardware in x86 systems has a VGA core. Calling set_par() at this * point will corrupt the VGA console, so it might be safer to skip a * call to set_par here and just allow fbcon to do it for you. */ /* xxxfb_set_par(info); */ if (register_framebuffer(info) < 0) { fb_dealloc_cmap(&info->cmap); return -EINVAL; } printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id); pci_set_drvdata(dev, info); /* or platform_set_drvdata(pdev, info) */ return 0; } /* * Cleanup */ /* static void __devexit xxxfb_remove(struct platform_device *pdev) */ static void __devexit xxxfb_remove(struct pci_dev *dev) { struct fb_info *info = pci_get_drvdata(dev); /* or platform_get_drvdata(pdev); */ if (info) { unregister_framebuffer(info); fb_dealloc_cmap(&info->cmap); /* ... */ framebuffer_release(info); } } #ifdef CONFIG_PCI #ifdef CONFIG_PM /** * xxxfb_suspend - Optional but recommended function. Suspend the device. * @dev: PCI device * @msg: the suspend event code. * * See Documentation/power/devices.txt for more information */ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg) { struct fb_info *info = pci_get_drvdata(dev); struct xxxfb_par *par = info->par; /* suspend here */ return 0; } /** * xxxfb_resume - Optional but recommended function. Resume the device. * @dev: PCI device * * See Documentation/power/devices.txt for more information */ static int xxxfb_resume(struct pci_dev *dev) { struct fb_info *info = pci_get_drvdata(dev); struct xxxfb_par *par = info->par; /* resume here */ return 0; } #else #define xxxfb_suspend NULL #define xxxfb_resume NULL #endif /* CONFIG_PM */ static struct pci_device_id xxxfb_id_table[] = { { PCI_VENDOR_ID_XXX, PCI_DEVICE_ID_XXX, PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, PCI_CLASS_MASK, 0 }, { 0, } }; /* For PCI drivers */ static struct pci_driver xxxfb_driver = { .name = "xxxfb", .id_table = xxxfb_id_table, .probe = xxxfb_probe, .remove = __devexit_p(xxxfb_remove), .suspend = xxxfb_suspend, /* optional but recommended */ .resume = xxxfb_resume, /* optional but recommended */ }; MODULE_DEVICE_TABLE(pci, xxxfb_id_table); int __init xxxfb_init(void) { /* * For kernel boot options (in 'video=xxxfb:<options>' format) */ #ifndef MODULE char *option = NULL; if (fb_get_options("xxxfb", &option)) return -ENODEV; xxxfb_setup(option); #endif return pci_register_driver(&xxxfb_driver); } static void __exit xxxfb_exit(void) { pci_unregister_driver(&xxxfb_driver); } #else /* non PCI, platform drivers */ #include <linux/platform_device.h> /* for platform devices */ #ifdef CONFIG_PM /** * xxxfb_suspend - Optional but recommended function. Suspend the device. * @dev: platform device * @msg: the suspend event code. * * See Documentation/power/devices.txt for more information */ static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg) { struct fb_info *info = platform_get_drvdata(dev); struct xxxfb_par *par = info->par; /* suspend here */ return 0; } /** * xxxfb_resume - Optional but recommended function. Resume the device. * @dev: platform device * * See Documentation/power/devices.txt for more information */ static int xxxfb_resume(struct platform_dev *dev) { struct fb_info *info = platform_get_drvdata(dev); struct xxxfb_par *par = info->par; /* resume here */ return 0; } #else #define xxxfb_suspend NULL #define xxxfb_resume NULL #endif /* CONFIG_PM */ static struct platform_device_driver xxxfb_driver = { .probe = xxxfb_probe, .remove = xxxfb_remove, .suspend = xxxfb_suspend, /* optional but recommended */ .resume = xxxfb_resume, /* optional but recommended */ .driver = { .name = "xxxfb", }, }; static struct platform_device *xxxfb_device; #ifndef MODULE /* * Setup */ /* * Only necessary if your driver takes special options, * otherwise we fall back on the generic fb_setup(). */ int __init xxxfb_setup(char *options) { /* Parse user speficied options (`video=xxxfb:') */ } #endif /* MODULE */ static int __init xxxfb_init(void) { int ret; /* * For kernel boot options (in 'video=xxxfb:<options>' format) */ #ifndef MODULE char *option = NULL; if (fb_get_options("xxxfb", &option)) return -ENODEV; xxxfb_setup(option); #endif ret = platform_driver_register(&xxxfb_driver); if (!ret) { xxxfb_device = platform_device_register_simple("xxxfb", 0, NULL, 0); if (IS_ERR(xxxfb_device)) { platform_driver_unregister(&xxxfb_driver); ret = PTR_ERR(xxxfb_device); } } return ret; } static void __exit xxxfb_exit(void) { platform_device_unregister(xxxfb_device); platform_driver_unregister(&xxxfb_driver); } #endif /* CONFIG_PCI */ /* ------------------------------------------------------------------------- */ /* * Modularization */ module_init(xxxfb_init); module_exit(xxxfb_remove); MODULE_LICENSE("GPL");