#include #include #include #include #include #include #include #define CLEVO_MAIL_LED_OFF 0x0084 #define CLEVO_MAIL_LED_BLINK_1HZ 0x008A #define CLEVO_MAIL_LED_BLINK_0_5HZ 0x0083 MODULE_AUTHOR("Márton Németh "); MODULE_DESCRIPTION("Clevo mail LED driver"); MODULE_LICENSE("GPL"); static bool __initdata nodetect; module_param_named(nodetect, nodetect, bool, 0); MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection"); static struct platform_device *pdev; static int __init clevo_mail_led_dmi_callback(const struct dmi_system_id *id) { printk(KERN_INFO KBUILD_MODNAME ": '%s' found\n", id->ident); return 1; } /* * struct clevo_mail_led_dmi_table - List of known good models * * Contains the known good models this driver is compatible with. * When adding a new model try to be as strict as possible. This * makes it possible to keep the false positives (the model is * detected as working, but in reality it is not) as low as * possible. */ static struct dmi_system_id __initdata clevo_mail_led_dmi_table[] = { { .callback = clevo_mail_led_dmi_callback, .ident = "Clevo D410J", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "VIA"), DMI_MATCH(DMI_PRODUCT_NAME, "K8N800"), DMI_MATCH(DMI_PRODUCT_VERSION, "VT8204B") } }, { .callback = clevo_mail_led_dmi_callback, .ident = "Clevo M5x0N", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."), DMI_MATCH(DMI_PRODUCT_NAME, "M5x0N") } }, { .callback = clevo_mail_led_dmi_callback, .ident = "Positivo Mobile", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "CLEVO Co. "), DMI_MATCH(DMI_BOARD_NAME, "M5X0V "), DMI_MATCH(DMI_PRODUCT_NAME, "Positivo Mobile"), DMI_MATCH(DMI_PRODUCT_VERSION, "VT6198") } }, { .callback = clevo_mail_led_dmi_callback, .ident = "Clevo D400P", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Clevo"), DMI_MATCH(DMI_BOARD_NAME, "D400P"), DMI_MATCH(DMI_BOARD_VERSION, "Rev.A"), DMI_MATCH(DMI_PRODUCT_VERSION, "0106") } }, { .callback = clevo_mail_led_dmi_callback, .ident = "Clevo D410V", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Clevo, Co."), DMI_MATCH(DMI_BOARD_NAME, "D400V/D470V"), DMI_MATCH(DMI_BOARD_VERSION, "SS78B"), DMI_MATCH(DMI_PRODUCT_VERSION, "Rev. A1") } }, { } }; MODULE_DEVICE_TABLE(dmi, clevo_mail_led_dmi_table); static void clevo_mail_led_set(struct led_classdev *led_cdev, enum led_brightness value) { i8042_lock_chip(); if (value == LED_OFF) i8042_command(NULL, CLEVO_MAIL_LED_OFF); else if (value <= LED_HALF) i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ); else i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ); i8042_unlock_chip(); } static int clevo_mail_led_blink(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off) { int status = -EINVAL; i8042_lock_chip(); if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) { /* Special case: the leds subsystem requested us to * chose one user friendly blinking of the LED, and * start it. Let's blink the led slowly (0.5Hz). */ *delay_on = 1000; /* ms */ *delay_off = 1000; /* ms */ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ); status = 0; } else if (*delay_on == 500 /* ms */ && *delay_off == 500 /* ms */) { /* blink the led with 1Hz */ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ); status = 0; } else if (*delay_on == 1000 /* ms */ && *delay_off == 1000 /* ms */) { /* blink the led with 0.5Hz */ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ); status = 0; } else { printk(KERN_DEBUG KBUILD_MODNAME ": clevo_mail_led_blink(..., %lu, %lu)," " returning -EINVAL (unsupported)\n", *delay_on, *delay_off); } i8042_unlock_chip(); return status; } static struct led_classdev clevo_mail_led = { .name = "clevo::mail", .brightness_set = clevo_mail_led_set, .blink_set = clevo_mail_led_blink, .flags = LED_CORE_SUSPENDRESUME, }; static int __devinit clevo_mail_led_probe(struct platform_device *pdev) { return led_classdev_register(&pdev->dev, &clevo_mail_led); } static int clevo_mail_led_remove(struct platform_device *pdev) { led_classdev_unregister(&clevo_mail_led); return 0; } static struct platform_driver clevo_mail_led_driver = { .probe = clevo_mail_led_probe, .remove = clevo_mail_led_remove, .driver = { .name = KBUILD_MODNAME, .owner = THIS_MODULE, }, }; static int __init clevo_mail_led_init(void) { int error = 0; int count = 0; /* Check with the help of DMI if we are running on supported hardware */ if (!nodetect) { count = dmi_check_system(clevo_mail_led_dmi_table); } else { count = 1; printk(KERN_ERR KBUILD_MODNAME ": Skipping DMI detection. " "If the driver works on your hardware please " "report model and the output of dmidecode in tracker " "at http://sourceforge.net/projects/clevo-mailled/\n"); } if (!count) return -ENODEV; pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); if (!IS_ERR(pdev)) { error = platform_driver_probe(&clevo_mail_led_driver, clevo_mail_led_probe); if (error) { printk(KERN_ERR KBUILD_MODNAME ": Can't probe platform driver\n"); platform_device_unregister(pdev); } } else error = PTR_ERR(pdev); return error; } static void __exit clevo_mail_led_exit(void) { platform_device_unregister(pdev); platform_driver_unregister(&clevo_mail_led_driver); clevo_mail_led_set(NULL, LED_OFF); } module_init(clevo_mail_led_init); module_exit(clevo_mail_led_exit);