# # Traffic control configuration. # menuconfig NET_SCHED bool "QoS and/or fair queueing" select NET_SCH_FIFO ---help--- When the kernel has several packets to send out over a network device, it has to decide which ones to send first, which ones to delay, and which ones to drop. This is the job of the queueing disciplines, several different algorithms for how to do this "fairly" have been proposed. If you say N here, you will get the standard packet scheduler, which is a FIFO (first come, first served). If you say Y here, you will be able to choose from among several alternative algorithms which can then be attached to different network devices. This is useful for example if some of your network devices are real time devices that need a certain minimum data flow rate, or if you need to limit the maximum data flow rate for traffic which matches specified criteria. This code is considered to be experimental. To administer these schedulers, you'll need the user-level utilities from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>. That package also contains some documentation; for more, check out <http://linux-net.osdl.org/index.php/Iproute2>. This Quality of Service (QoS) support will enable you to use Differentiated Services (diffserv) and Resource Reservation Protocol (RSVP) on your Linux router if you also say Y to the corresponding classifiers below. Documentation and software is at <http://diffserv.sourceforge.net/>. If you say Y here and to "/proc file system" below, you will be able to read status information about packet schedulers from the file /proc/net/psched. The available schedulers are listed in the following questions; you can say Y to as many as you like. If unsure, say N now. if NET_SCHED comment "Queueing/Scheduling" config NET_SCH_CBQ tristate "Class Based Queueing (CBQ)" ---help--- Say Y here if you want to use the Class-Based Queueing (CBQ) packet scheduling algorithm. This algorithm classifies the waiting packets into a tree-like hierarchy of classes; the leaves of this tree are in turn scheduled by separate algorithms. See the top of <file:net/sched/sch_cbq.c> for more details. CBQ is a commonly used scheduler, so if you're unsure, you should say Y here. Then say Y to all the queueing algorithms below that you want to use as leaf disciplines. To compile this code as a module, choose M here: the module will be called sch_cbq. config NET_SCH_HTB tristate "Hierarchical Token Bucket (HTB)" ---help--- Say Y here if you want to use the Hierarchical Token Buckets (HTB) packet scheduling algorithm. See <http://luxik.cdi.cz/~devik/qos/htb/> for complete manual and in-depth articles. HTB is very similar to CBQ regarding its goals however is has different properties and different algorithm. To compile this code as a module, choose M here: the module will be called sch_htb. config NET_SCH_HFSC tristate "Hierarchical Fair Service Curve (HFSC)" ---help--- Say Y here if you want to use the Hierarchical Fair Service Curve (HFSC) packet scheduling algorithm. To compile this code as a module, choose M here: the module will be called sch_hfsc. config NET_SCH_ATM tristate "ATM Virtual Circuits (ATM)" depends on ATM ---help--- Say Y here if you want to use the ATM pseudo-scheduler. This provides a framework for invoking classifiers, which in turn select classes of this queuing discipline. Each class maps the flow(s) it is handling to a given virtual circuit. See the top of <file:net/sched/sch_atm.c> for more details. To compile this code as a module, choose M here: the module will be called sch_atm. config NET_SCH_PRIO tristate "Multi Band Priority Queueing (PRIO)" ---help--- Say Y here if you want to use an n-band priority queue packet scheduler. To compile this code as a module, choose M here: the module will be called sch_prio. config NET_SCH_MULTIQ tristate "Hardware Multiqueue-aware Multi Band Queuing (MULTIQ)" ---help--- Say Y here if you want to use an n-band queue packet scheduler to support devices that have multiple hardware transmit queues. To compile this code as a module, choose M here: the module will be called sch_multiq. config NET_SCH_RED tristate "Random Early Detection (RED)" ---help--- Say Y here if you want to use the Random Early Detection (RED) packet scheduling algorithm. See the top of <file:net/sched/sch_red.c> for more details. To compile this code as a module, choose M here: the module will be called sch_red. config NET_SCH_SFQ tristate "Stochastic Fairness Queueing (SFQ)" ---help--- Say Y here if you want to use the Stochastic Fairness Queueing (SFQ) packet scheduling algorithm. See the top of <file:net/sched/sch_sfq.c> for more details. To compile this code as a module, choose M here: the module will be called sch_sfq. config NET_SCH_TEQL tristate "True Link Equalizer (TEQL)" ---help--- Say Y here if you want to use the True Link Equalizer (TLE) packet scheduling algorithm. This queueing discipline allows the combination of several physical devices into one virtual device. See the top of <file:net/sched/sch_teql.c> for more details. To compile this code as a module, choose M here: the module will be called sch_teql. config NET_SCH_TBF tristate "Token Bucket Filter (TBF)" ---help--- Say Y here if you want to use the Token Bucket Filter (TBF) packet scheduling algorithm. See the top of <file:net/sched/sch_tbf.c> for more details. To compile this code as a module, choose M here: the module will be called sch_tbf. config NET_SCH_GRED tristate "Generic Random Early Detection (GRED)" ---help--- Say Y here if you want to use the Generic Random Early Detection (GRED) packet scheduling algorithm for some of your network devices (see the top of <file:net/sched/sch_red.c> for details and references about the algorithm). To compile this code as a module, choose M here: the module will be called sch_gred. config NET_SCH_DSMARK tristate "Differentiated Services marker (DSMARK)" ---help--- Say Y if you want to schedule packets according to the Differentiated Services architecture proposed in RFC 2475. Technical information on this method, with pointers to associated RFCs, is available at <http://www.gta.ufrj.br/diffserv/>. To compile this code as a module, choose M here: the module will be called sch_dsmark. config NET_SCH_NETEM tristate "Network emulator (NETEM)" ---help--- Say Y if you want to emulate network delay, loss, and packet re-ordering. This is often useful to simulate networks when testing applications or protocols. To compile this driver as a module, choose M here: the module will be called sch_netem. If unsure, say N. config NET_SCH_DRR tristate "Deficit Round Robin scheduler (DRR)" help Say Y here if you want to use the Deficit Round Robin (DRR) packet scheduling algorithm. To compile this driver as a module, choose M here: the module will be called sch_drr. If unsure, say N. config NET_SCH_INGRESS tristate "Ingress Qdisc" depends on NET_CLS_ACT ---help--- Say Y here if you want to use classifiers for incoming packets. If unsure, say Y. To compile this code as a module, choose M here: the module will be called sch_ingress. comment "Classification" config NET_CLS boolean config NET_CLS_BASIC tristate "Elementary classification (BASIC)" select NET_CLS ---help--- Say Y here if you want to be able to classify packets using only extended matches and actions. To compile this code as a module, choose M here: the module will be called cls_basic. config NET_CLS_TCINDEX tristate "Traffic-Control Index (TCINDEX)" select NET_CLS ---help--- Say Y here if you want to be able to classify packets based on traffic control indices. You will want this feature if you want to implement Differentiated Services together with DSMARK. To compile this code as a module, choose M here: the module will be called cls_tcindex. config NET_CLS_ROUTE4 tristate "Routing decision (ROUTE)" select NET_CLS_ROUTE select NET_CLS ---help--- If you say Y here, you will be able to classify packets according to the route table entry they matched. To compile this code as a module, choose M here: the module will be called cls_route. config NET_CLS_ROUTE bool config NET_CLS_FW tristate "Netfilter mark (FW)" select NET_CLS ---help--- If you say Y here, you will be able to classify packets according to netfilter/firewall marks. To compile this code as a module, choose M here: the module will be called cls_fw. config NET_CLS_U32 tristate "Universal 32bit comparisons w/ hashing (U32)" select NET_CLS ---help--- Say Y here to be able to classify packets using a universal 32bit pieces based comparison scheme. To compile this code as a module, choose M here: the module will be called cls_u32. config CLS_U32_PERF bool "Performance counters support" depends on NET_CLS_U32 ---help--- Say Y here to make u32 gather additional statistics useful for fine tuning u32 classifiers. config CLS_U32_MARK bool "Netfilter marks support" depends on NET_CLS_U32 ---help--- Say Y here to be able to use netfilter marks as u32 key. config NET_CLS_RSVP tristate "IPv4 Resource Reservation Protocol (RSVP)" select NET_CLS ---help--- The Resource Reservation Protocol (RSVP) permits end systems to request a minimum and maximum data flow rate for a connection; this is important for real time data such as streaming sound or video. Say Y here if you want to be able to classify outgoing packets based on their RSVP requests. To compile this code as a module, choose M here: the module will be called cls_rsvp. config NET_CLS_RSVP6 tristate "IPv6 Resource Reservation Protocol (RSVP6)" select NET_CLS ---help--- The Resource Reservation Protocol (RSVP) permits end systems to request a minimum and maximum data flow rate for a connection; this is important for real time data such as streaming sound or video. Say Y here if you want to be able to classify outgoing packets based on their RSVP requests and you are using the IPv6 protocol. To compile this code as a module, choose M here: the module will be called cls_rsvp6. config NET_CLS_FLOW tristate "Flow classifier" select NET_CLS ---help--- If you say Y here, you will be able to classify packets based on a configurable combination of packet keys. This is mostly useful in combination with SFQ. To compile this code as a module, choose M here: the module will be called cls_flow. config NET_CLS_CGROUP tristate "Control Group Classifier" select NET_CLS depends on CGROUPS ---help--- Say Y here if you want to classify packets based on the control cgroup of their process. To compile this code as a module, choose M here: the module will be called cls_cgroup. config NET_EMATCH bool "Extended Matches" select NET_CLS ---help--- Say Y here if you want to use extended matches on top of classifiers and select the extended matches below. Extended matches are small classification helpers not worth writing a separate classifier for. A recent version of the iproute2 package is required to use extended matches. config NET_EMATCH_STACK int "Stack size" depends on NET_EMATCH default "32" ---help--- Size of the local stack variable used while evaluating the tree of ematches. Limits the depth of the tree, i.e. the number of encapsulated precedences. Every level requires 4 bytes of additional stack space. config NET_EMATCH_CMP tristate "Simple packet data comparison" depends on NET_EMATCH ---help--- Say Y here if you want to be able to classify packets based on simple packet data comparisons for 8, 16, and 32bit values. To compile this code as a module, choose M here: the module will be called em_cmp. config NET_EMATCH_NBYTE tristate "Multi byte comparison" depends on NET_EMATCH ---help--- Say Y here if you want to be able to classify packets based on multiple byte comparisons mainly useful for IPv6 address comparisons. To compile this code as a module, choose M here: the module will be called em_nbyte. config NET_EMATCH_U32 tristate "U32 key" depends on NET_EMATCH ---help--- Say Y here if you want to be able to classify packets using the famous u32 key in combination with logic relations. To compile this code as a module, choose M here: the module will be called em_u32. config NET_EMATCH_META tristate "Metadata" depends on NET_EMATCH ---help--- Say Y here if you want to be able to classify packets based on metadata such as load average, netfilter attributes, socket attributes and routing decisions. To compile this code as a module, choose M here: the module will be called em_meta. config NET_EMATCH_TEXT tristate "Textsearch" depends on NET_EMATCH select TEXTSEARCH select TEXTSEARCH_KMP select TEXTSEARCH_BM select TEXTSEARCH_FSM ---help--- Say Y here if you want to be able to classify packets based on textsearch comparisons. To compile this code as a module, choose M here: the module will be called em_text. config NET_CLS_ACT bool "Actions" ---help--- Say Y here if you want to use traffic control actions. Actions get attached to classifiers and are invoked after a successful classification. They are used to overwrite the classification result, instantly drop or redirect packets, etc. A recent version of the iproute2 package is required to use extended matches. config NET_ACT_POLICE tristate "Traffic Policing" depends on NET_CLS_ACT ---help--- Say Y here if you want to do traffic policing, i.e. strict bandwidth limiting. This action replaces the existing policing module. To compile this code as a module, choose M here: the module will be called act_police. config NET_ACT_GACT tristate "Generic actions" depends on NET_CLS_ACT ---help--- Say Y here to take generic actions such as dropping and accepting packets. To compile this code as a module, choose M here: the module will be called act_gact. config GACT_PROB bool "Probability support" depends on NET_ACT_GACT ---help--- Say Y here to use the generic action randomly or deterministically. config NET_ACT_MIRRED tristate "Redirecting and Mirroring" depends on NET_CLS_ACT ---help--- Say Y here to allow packets to be mirrored or redirected to other devices. To compile this code as a module, choose M here: the module will be called act_mirred. config NET_ACT_IPT tristate "IPtables targets" depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES ---help--- Say Y here to be able to invoke iptables targets after successful classification. To compile this code as a module, choose M here: the module will be called act_ipt. config NET_ACT_NAT tristate "Stateless NAT" depends on NET_CLS_ACT ---help--- Say Y here to do stateless NAT on IPv4 packets. You should use netfilter for NAT unless you know what you are doing. To compile this code as a module, choose M here: the module will be called act_nat. config NET_ACT_PEDIT tristate "Packet Editing" depends on NET_CLS_ACT ---help--- Say Y here if you want to mangle the content of packets. To compile this code as a module, choose M here: the module will be called act_pedit. config NET_ACT_SIMP tristate "Simple Example (Debug)" depends on NET_CLS_ACT ---help--- Say Y here to add a simple action for demonstration purposes. It is meant as an example and for debugging purposes. It will print a configured policy string followed by the packet count to the console for every packet that passes by. If unsure, say N. To compile this code as a module, choose M here: the module will be called act_simple. config NET_ACT_SKBEDIT tristate "SKB Editing" depends on NET_CLS_ACT ---help--- Say Y here to change skb priority or queue_mapping settings. If unsure, say N. To compile this code as a module, choose M here: the module will be called act_skbedit. config NET_CLS_IND bool "Incoming device classification" depends on NET_CLS_U32 || NET_CLS_FW ---help--- Say Y here to extend the u32 and fw classifier to support classification based on the incoming device. This option is likely to disappear in favour of the metadata ematch. endif # NET_SCHED config NET_SCH_FIFO bool