if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform (aka Lubbock)" select PXA25x select SA1111 select PXA_HAVE_BOARD_IRQS config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" select PXA27x select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_ZYLONITE bool select PXA3xx select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_ZYLONITE300 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" select CPU_PXA300 select CPU_PXA310 select MACH_ZYLONITE config MACH_ZYLONITE320 bool "PXA3xx Development Platform (aka Zylonite) PXA320" select CPU_PXA320 select MACH_ZYLONITE config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" select PXA3xx select CPU_PXA300 select CPU_PXA310 select PXA_SSP config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx select CPU_PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx select CPU_PXA930 comment "Third Party Dev Platforms (sorted by vendor name)" config ARCH_PXA_IDP bool "Accelent Xscale IDP" select PXA25x config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" select PXA25x select ISA select I2C_GPIO select HAVE_PWM select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS select ARCOM_PCMCIA config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" select PXA27x select ISA select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS select ARCOM_PCMCIA config MACH_BALLOON3 bool "Balloon 3 board" select PXA27x select IWMMXT select PXA_HAVE_BOARD_IRQS config MACH_CSB726 bool "Enable Cogent CSB726 System On a Module" select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on a Cogent CSB726 System On Module. config CSB726_CSB701 bool "Enable support for CSB701 baseboard" depends on MACH_CSB726 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select PXA27x select IWMMXT select PXA25x select PXA_SSP config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x config MACH_EXEDA bool "CompuLab eXeda platform" select PXA27x config MACH_CM_X300 bool "CompuLab CM-X300 modules" select PXA3xx select CPU_PXA300 select CPU_PXA310 select HAVE_PWM config MACH_CAPC7117 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" select CPU_PXA320 select PXA3xx config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" select PXA25x help Say Y here if you intend to run this kernel on Basix, Connex, ws-200ax, ws-400ax systems choice prompt "Gumstix Carrier/Expansion Board" depends on ARCH_GUMSTIX config GUMSTIX_AM200EPD bool "Enable AM200EPD board support" config GUMSTIX_AM300EPD bool "Enable AM300EPD board support" endchoice config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" select PXA27x select IWMMXT select PXA_HAVE_BOARD_IRQS config MACH_STARGATE2 bool "Intel Stargate 2 Platform" select PXA27x select IWMMXT select PXA_HAVE_BOARD_IRQS config MACH_XCEP bool "Iskratel Electronics XCEP" select PXA25x select MTD select MTD_PARTITIONS select MTD_PHYSMAP select MTD_CFI_INTELEXT select MTD_CFI select MTD_CHAR select SMC91X select PXA_SSP help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. Tuned for usage in Libera instruments for particle accelerators. config TRIZEPS_PXA bool "PXA based Keith und Koep Trizeps DIMM-Modules" config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" depends on TRIZEPS_PXA select TRIZEPS_PCMCIA select PXA27x config MACH_TRIZEPS4WL bool "Keith und Koep Trizeps4-WL DIMM-Module" depends on TRIZEPS_PXA select TRIZEPS_PCMCIA select PXA27x select PXA_SSP choice prompt "Select base board for Trizeps module" depends on TRIZEPS_PXA config MACH_TRIZEPS_CONXS bool "ConXS Eval Board" config MACH_TRIZEPS_UCONXS bool "uConXS Eval Board" config MACH_TRIZEPS_ANY bool "another Board" endchoice config ARCOM_PCMCIA bool help Generic option for Arcom Viper/Zeus PCMCIA config TRIZEPS_PCMCIA bool help Enable PCMCIA support for Trizeps modules config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT select PXA_SSP select PXA_HAVE_BOARD_IRQS config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" select HAVE_PWM depends on MACH_PCM027 choice prompt "display on pcm990" depends on MACH_PCM990_BASEBOARD config PCM990_DISPLAY_SHARP bool "sharp lq084v1dg21 stn display" config PCM990_DISPLAY_NEC bool "nec nl6448bc20_18d tft display" config PCM990_DISPLAY_NONE bool "no display" endchoice config MACH_COLIBRI bool "Toradex Colibri PXA270" select PXA27x config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" select PXA3xx select CPU_PXA300 select CPU_PXA310 config MACH_COLIBRI320 bool "Toradex Colibri PXA320" select PXA3xx select CPU_PXA320 comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" select PXA27x select IWMMXT select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_H5000 bool "HP iPAQ h5000" select PXA25x config MACH_HIMALAYA bool "HTC Himalaya Support" select CPU_PXA26x config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_MIOA701 bool "Mitac Mio A701 Support" select PXA27x select IWMMXT select HAVE_PWM select GPIO_SYSFS help Say Y here if you intend to run this kernel on a MIO A701. Currently there is only basic support for this PDA. config PXA_EZX bool "Motorola EZX Platform" select PXA27x select IWMMXT select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_EZX_A780 bool "Motorola EZX A780" default y depends on PXA_EZX config MACH_EZX_E680 bool "Motorola EZX E680" default y depends on PXA_EZX config MACH_EZX_A1200 bool "Motorola EZX A1200" default y depends on PXA_EZX config MACH_EZX_A910 bool "Motorola EZX A910" default y depends on PXA_EZX config MACH_EZX_E6 bool "Motorola EZX E6" default y depends on PXA_EZX config MACH_EZX_E2 bool "Motorola EZX E2" default y depends on PXA_EZX config MACH_MP900C bool "Nec Mobilepro 900/c" select PXA25x config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM config MACH_PALMTE2 bool "Palm Tungsten|E2" default y depends on ARCH_PXA_PALM select PXA25x help Say Y here if you intend to run this kernel on a Palm Tungsten|E2 handheld computer. config MACH_PALMTC bool "Palm Tungsten|C" default y depends on ARCH_PXA_PALM select PXA25x help Say Y here if you intend to run this kernel on a Palm Tungsten|C handheld computer. config MACH_PALMT5 bool "Palm Tungsten|T5" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on a Palm Tungsten|T5 handheld computer. config MACH_PALMTX bool "Palm T|X" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on a Palm T|X handheld computer. config MACH_PALMZ72 bool "Palm Zire 72" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. config MACH_PALMLD bool "Palm LifeDrive" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on a Palm LifeDrive handheld computer. config PALM_TREO bool depends on ARCH_PXA_PALM config MACH_CENTRO bool "Palm Centro 685 (GSM)" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT select PALM_TREO help Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) smartphone. config MACH_TREO680 bool "Palm Treo 680" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT select PALM_TREO help Say Y here if you intend to run this kernel on Palm Treo 680 smartphone. config MACH_RAUMFELD_RC bool "Raumfeld Controller" select PXA3xx select CPU_PXA300 select HAVE_PWM config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" select PXA3xx select CPU_PXA300 select PXA_SSP config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" select PXA3xx select CPU_PXA300 select PXA_SSP config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_SCOOP select SHARP_PARAM help Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. config SHARPSL_PM bool select APM_EMULATION select SHARPSL_PM_MAX1111 config SHARPSL_PM_MAX1111 bool depends on !CORGI_SSP_DEPRECATED select HWMON select SENSORS_MAX1111 config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO select PXA_SSP select PXA_HAVE_BOARD_IRQS config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 select MACH_SPITZ select I2C select I2C_PXA config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 config MACH_BORZOI bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" depends on PXA_SHARPSL select PXA25x select PXA_HAVE_BOARD_IRQS config MACH_ICONTROL bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" select CPU_PXA320 select PXA3xx config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x select PXA_HAVE_BOARD_IRQS config MACH_E330 bool "Toshiba e330" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e330 family PDA. config MACH_E350 bool "Toshiba e350" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e350 family PDA. config MACH_E740 bool "Toshiba e740" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e740 family PDA. config MACH_E750 bool "Toshiba e750" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e750 family PDA. config MACH_E400 bool "Toshiba e400" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e400 family PDA. config MACH_E800 bool "Toshiba e800" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. endmenu config PXA25x bool select CPU_XSCALE help Select code specific to PXA21x/25x/26x variants config PXA27x bool select CPU_XSCALE help Select code specific to PXA27x variants config CPU_PXA26x bool select PXA25x help Select code specific to PXA26x (codename Dalhart) config PXA3xx bool select CPU_XSC3 help Select code specific to PXA3xx variants config CPU_PXA300 bool select PXA3xx help PXA300 (codename Monahans-L) config CPU_PXA310 bool select CPU_PXA300 help PXA310 (codename Monahans-LV) config CPU_PXA320 bool select PXA3xx help PXA320 (codename Monahans-P) config CPU_PXA930 bool select PXA3xx help PXA930 (codename Tavor-P) config CPU_PXA935 bool select CPU_PXA930 help PXA935 (codename Tavor-P65) config CPU_PXA950 bool select CPU_PXA930 help PXA950 (codename Tavor-PV2) config PXA_SHARP_C7xx bool select PXA_SSP select SHARPSL_PM help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool select PXA_SSP select SHARPSL_PM help Enable common support for Sharp Cxx00 models config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA select RFKILL help This is a simple driver that is able to control the state of built in bluetooth chip on tosa. config PXA_HAVE_BOARD_IRQS bool config PXA_HAVE_ISA_IRQS bool endif