/* Copyright 2011-2014 Autronica Fire and Security AS * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. * * Author(s): * 2011-2014 Arvid Brodin, arvid.brodin@alten.se */ #include "hsr_slave.h" #include #include #include "hsr_main.h" #include "hsr_device.h" #include "hsr_framereg.h" static int check_slave_ok(struct net_device *dev) { /* Don't allow HSR on non-ethernet like devices */ if ((dev->flags & IFF_LOOPBACK) || (dev->type != ARPHRD_ETHER) || (dev->addr_len != ETH_ALEN)) { netdev_info(dev, "Cannot use loopback or non-ethernet device as HSR slave.\n"); return -EINVAL; } /* Don't allow enslaving hsr devices */ if (is_hsr_master(dev)) { netdev_info(dev, "Cannot create trees of HSR devices.\n"); return -EINVAL; } if (is_hsr_slave(dev)) { netdev_info(dev, "This device is already a HSR slave.\n"); return -EINVAL; } if (dev->priv_flags & IFF_802_1Q_VLAN) { netdev_info(dev, "HSR on top of VLAN is not yet supported in this driver.\n"); return -EINVAL; } /* HSR over bonded devices has not been tested, but I'm not sure it * won't work... */ return 0; } static struct sk_buff *hsr_pull_tag(struct sk_buff *skb) { struct hsr_tag *hsr_tag; struct sk_buff *skb2; skb2 = skb_share_check(skb, GFP_ATOMIC); if (unlikely(!skb2)) goto err_free; skb = skb2; if (unlikely(!pskb_may_pull(skb, HSR_HLEN))) goto err_free; hsr_tag = (struct hsr_tag *) skb->data; skb->protocol = hsr_tag->encap_proto; skb_pull(skb, HSR_HLEN); return skb; err_free: kfree_skb(skb); return NULL; } /* The uses I can see for these HSR supervision frames are: * 1) Use the frames that are sent after node initialization ("HSR_TLV.Type = * 22") to reset any sequence_nr counters belonging to that node. Useful if * the other node's counter has been reset for some reason. * -- * Or not - resetting the counter and bridging the frame would create a * loop, unfortunately. * * 2) Use the LifeCheck frames to detect ring breaks. I.e. if no LifeCheck * frame is received from a particular node, we know something is wrong. * We just register these (as with normal frames) and throw them away. * * 3) Allow different MAC addresses for the two slave interfaces, using the * MacAddressA field. */ static bool is_supervision_frame(struct hsr_priv *hsr, struct sk_buff *skb) { struct hsr_sup_tag *hsr_stag; if (!ether_addr_equal(eth_hdr(skb)->h_dest, hsr->sup_multicast_addr)) return false; hsr_stag = (struct hsr_sup_tag *) skb->data; if (get_hsr_stag_path(hsr_stag) != 0x0f) return false; if ((hsr_stag->HSR_TLV_Type != HSR_TLV_ANNOUNCE) && (hsr_stag->HSR_TLV_Type != HSR_TLV_LIFE_CHECK)) return false; if (hsr_stag->HSR_TLV_Length != 12) return false; return true; } /* Implementation somewhat according to IEC-62439-3, p. 43 */ rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb) { struct sk_buff *skb = *pskb; struct net_device *dev = skb->dev; struct hsr_priv *hsr; struct net_device *other_slave; struct hsr_node *node; bool deliver_to_self; struct sk_buff *skb_deliver; enum hsr_dev_idx dev_in_idx, dev_other_idx; bool dup_out; int ret; if (eth_hdr(skb)->h_proto != htons(ETH_P_PRP)) return RX_HANDLER_PASS; hsr = get_hsr_master(dev); if (!hsr) { WARN_ON_ONCE(1); return RX_HANDLER_PASS; } if (dev == hsr->slave[0]) { dev_in_idx = HSR_DEV_SLAVE_A; dev_other_idx = HSR_DEV_SLAVE_B; } else { dev_in_idx = HSR_DEV_SLAVE_B; dev_other_idx = HSR_DEV_SLAVE_A; } node = hsr_find_node(&hsr->self_node_db, skb); if (node) { /* Always kill frames sent by ourselves */ kfree_skb(skb); return RX_HANDLER_CONSUMED; } /* Is this frame a candidate for local reception? */ deliver_to_self = false; if ((skb->pkt_type == PACKET_HOST) || (skb->pkt_type == PACKET_MULTICAST) || (skb->pkt_type == PACKET_BROADCAST)) deliver_to_self = true; else if (ether_addr_equal(eth_hdr(skb)->h_dest, hsr->dev->dev_addr)) { skb->pkt_type = PACKET_HOST; deliver_to_self = true; } rcu_read_lock(); /* node_db */ node = hsr_find_node(&hsr->node_db, skb); if (is_supervision_frame(hsr, skb)) { skb_pull(skb, sizeof(struct hsr_sup_tag)); node = hsr_merge_node(hsr, node, skb, dev_in_idx); if (!node) { rcu_read_unlock(); /* node_db */ kfree_skb(skb); hsr->dev->stats.rx_dropped++; return RX_HANDLER_CONSUMED; } skb_push(skb, sizeof(struct hsr_sup_tag)); deliver_to_self = false; } if (!node) { /* Source node unknown; this might be a HSR frame from * another net (different multicast address). Ignore it. */ rcu_read_unlock(); /* node_db */ kfree_skb(skb); return RX_HANDLER_CONSUMED; } /* Register ALL incoming frames as outgoing through the other interface. * This allows us to register frames as incoming only if they are valid * for the receiving interface, without using a specific counter for * incoming frames. */ dup_out = hsr_register_frame_out(node, dev_other_idx, skb); if (!dup_out) hsr_register_frame_in(node, dev_in_idx); /* Forward this frame? */ if (!dup_out && (skb->pkt_type != PACKET_HOST)) other_slave = get_other_slave(hsr, dev); else other_slave = NULL; if (hsr_register_frame_out(node, HSR_DEV_MASTER, skb)) deliver_to_self = false; rcu_read_unlock(); /* node_db */ if (!deliver_to_self && !other_slave) { kfree_skb(skb); /* Circulated frame; silently remove it. */ return RX_HANDLER_CONSUMED; } skb_deliver = skb; if (deliver_to_self && other_slave) { /* skb_clone() is not enough since we will strip the hsr tag * and do address substitution below */ skb_deliver = pskb_copy(skb, GFP_ATOMIC); if (!skb_deliver) { deliver_to_self = false; hsr->dev->stats.rx_dropped++; } } if (deliver_to_self) { bool multicast_frame; skb_deliver = hsr_pull_tag(skb_deliver); if (!skb_deliver) { hsr->dev->stats.rx_dropped++; goto forward; } #if !defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) /* Move everything in the header that is after the HSR tag, * to work around alignment problems caused by the 6-byte HSR * tag. In practice, this removes/overwrites the HSR tag in * the header and restores a "standard" packet. */ memmove(skb_deliver->data - HSR_HLEN, skb_deliver->data, skb_headlen(skb_deliver)); /* Adjust skb members so they correspond with the move above. * This cannot possibly underflow skb->data since hsr_pull_tag() * above succeeded. * At this point in the protocol stack, the transport and * network headers have not been set yet, and we haven't touched * the mac header nor the head. So we only need to adjust data * and tail: */ skb_deliver->data -= HSR_HLEN; skb_deliver->tail -= HSR_HLEN; #endif skb_deliver->dev = hsr->dev; hsr_addr_subst_source(hsr, skb_deliver); multicast_frame = (skb_deliver->pkt_type == PACKET_MULTICAST); ret = netif_rx(skb_deliver); if (ret == NET_RX_DROP) { hsr->dev->stats.rx_dropped++; } else { hsr->dev->stats.rx_packets++; hsr->dev->stats.rx_bytes += skb->len; if (multicast_frame) hsr->dev->stats.multicast++; } } forward: if (other_slave) { skb_push(skb, ETH_HLEN); skb->dev = other_slave; dev_queue_xmit(skb); } return RX_HANDLER_CONSUMED; } int hsr_add_slave(struct hsr_priv *hsr, struct net_device *dev, int idx) { int res; dev_hold(dev); res = check_slave_ok(dev); if (res) goto fail; res = dev_set_promiscuity(dev, 1); if (res) goto fail; res = netdev_rx_handler_register(dev, hsr_handle_frame, hsr); if (res) goto fail_rx_handler; hsr->slave[idx] = dev; /* Set required header length */ if (dev->hard_header_len + HSR_HLEN > hsr->dev->hard_header_len) hsr->dev->hard_header_len = dev->hard_header_len + HSR_HLEN; dev_set_mtu(hsr->dev, hsr_get_max_mtu(hsr)); return 0; fail_rx_handler: dev_set_promiscuity(dev, -1); fail: dev_put(dev); return res; } void hsr_del_slave(struct hsr_priv *hsr, int idx) { struct net_device *slave; slave = hsr->slave[idx]; hsr->slave[idx] = NULL; netdev_update_features(hsr->dev); dev_set_mtu(hsr->dev, hsr_get_max_mtu(hsr)); if (slave) { netdev_rx_handler_unregister(slave); dev_set_promiscuity(slave, -1); } synchronize_rcu(); dev_put(slave); }