What: /sys/class/pktcdvd/ Date: Oct. 2006 KernelVersion: 2.6.20 Contact: Thomas Maier <balagi@justmail.de> Description: sysfs interface --------------- The pktcdvd module (packet writing driver) creates these files in the sysfs: (<devid> is in format major:minor ) /sys/class/pktcdvd/ add (0200) Write a block device id (major:minor) to create a new pktcdvd device and map it to the block device. remove (0200) Write the pktcdvd device id (major:minor) to it to remove the pktcdvd device. device_map (0444) Shows the device mapping in format: pktcdvd[0-7] <pktdevid> <blkdevid> /sys/class/pktcdvd/pktcdvd[0-7]/ dev (0444) Device id uevent (0200) To send an uevent. /sys/class/pktcdvd/pktcdvd[0-7]/stat/ packets_started (0444) Number of started packets. packets_finished (0444) Number of finished packets. kb_written (0444) kBytes written. kb_read (0444) kBytes read. kb_read_gather (0444) kBytes read to fill write packets. reset (0200) Write any value to it to reset pktcdvd device statistic values, like bytes read/written. /sys/class/pktcdvd/pktcdvd[0-7]/write_queue/ size (0444) Contains the size of the bio write queue. congestion_off (0644) If bio write queue size is below this mark, accept new bio requests from the block layer. congestion_on (0644) If bio write queue size is higher as this mark, do no longer accept bio write requests from the block layer and wait till the pktcdvd device has processed enough bio's so that bio write queue size is below congestion off mark. A value of <= 0 disables congestion control. Example: -------- To use the pktcdvd sysfs interface directly, you can do: # create a new pktcdvd device mapped to /dev/hdc echo "22:0" >/sys/class/pktcdvd/add cat /sys/class/pktcdvd/device_map # assuming device pktcdvd0 was created, look at stat's cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written # print the device id of the mapped block device fgrep pktcdvd0 /sys/class/pktcdvd/device_map # remove device, using pktcdvd0 device id 253:0 echo "253:0" >/sys/class/pktcdvd/remove