/* * Copyright 2013 Gateworks Corporation * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { model = "Gateworks Ventana GW5400-A"; compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q"; /* these are used by bootloader for disabling nodes */ aliases { ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; led0 = &led0; led1 = &led1; led2 = &led2; ssi0 = &ssi1; spi0 = &ecspi1; usb0 = &usbh1; usb1 = &usbotg; }; chosen { bootargs = "console=ttymxc1,115200"; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */ default-state = "off"; }; }; memory { reg = <0x10000000 0x40000000>; }; pps { compatible = "pps-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; reg_1p0v: regulator@0 { compatible = "regulator-fixed"; reg = <0>; regulator-name = "1P0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; reg_3p3v: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_usb_h1_vbus: regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; reg_usb_otg_vbus: regulator@3 { compatible = "regulator-fixed"; reg = <3>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; sound { compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "sgtl5000-audio"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; mux-int-port = <1>; mux-ext-port = <4>; }; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; flash: m25p80@0 { compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; }; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; &hdmi { ddc-i2c-bus = <&i2c3>; status = "okay"; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; eeprom2: eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; pagesize = <16>; }; eeprom3: eeprom@52 { compatible = "atmel,24c02"; reg = <0x52>; pagesize = <16>; }; eeprom4: eeprom@53 { compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; }; gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; }; rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; regulators { sw1a_reg: sw1ab { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; regulator-boot-on; regulator-always-on; }; sw3a_reg: sw3a { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; sw3b_reg: sw3b { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; }; swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; }; snvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vgen1_reg: vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen2_reg: vgen2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen5_reg: vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen6_reg: vgen6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; accelerometer: mma8450@1c { compatible = "fsl,mma8450"; reg = <0x1c>; }; codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <&sw4_reg>; VDDIO-supply = <®_3p3v>; }; touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; interrupts = <12 2>; wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; }; &ldb { status = "okay"; }; &pcie { reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; eth1: sky2@8 { /* MAC/PHY on bus 8 */ compatible = "marvell,sky2"; }; }; &ssi1 { status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; status = "okay"; }; &usbotg { vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; status = "okay"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; &iomuxc { imx6q-gw5400-a { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ >; }; pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ >; }; pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 >; }; }; };