What: /sys/bus/iio/devices/iio:deviceX KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Hardware chip or device accessed by one communication port. Corresponds to a grouping of sensor channels. X is the IIO index of the device. What: /sys/bus/iio/devices/triggerX KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: An event driven driver of data capture to an in kernel buffer. May be provided by a device driver that also has an IIO device based on hardware generated events (e.g. data ready) or provided by a separate driver for other hardware (e.g. periodic timer, GPIO or high resolution timer). Contains trigger type specific elements. These do not generalize well and hence are not documented in this file. X is the IIO index of the trigger. What: /sys/bus/iio/devices/iio:deviceX/buffer KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Directory of attributes relating to the buffer for the device. What: /sys/bus/iio/devices/iio:deviceX/name KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Description of the physical chip / device for device X. Typically a part number. What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency What: /sys/bus/iio/devices/triggerX/sampling_frequency KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Some devices have internal clocks. This parameter sets the resulting sampling frequency. In many devices this parameter has an effect on input filters etc. rather than simply controlling when the input is sampled. As this effects data ready triggers, hardware buffers and the sysfs direct access interfaces, it may be found in any of the relevant directories. If it effects all of the above then it is to be found in the base device directory. What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available What: /sys/.../iio:deviceX/buffer/sampling_frequency_available What: /sys/bus/iio/devices/triggerX/sampling_frequency_available KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: When the internal sampling clock can only take a small discrete set of values, this file lists those available. What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Hardware dependent ADC oversampling. Controls the sampling ratio of the digital filter if available. What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Hardware dependent values supported by the oversampling filter. What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no bias removal etc.) voltage measurement from channel Y. In special cases where the channel does not correspond to externally available input one of the named versions may be used. The number must always be specified and unique to allow association with event codes. Units after application of scale and offset are millivolts. What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled) differential voltage measurement equivalent to channel Y - channel Z where these channel numbers apply to the physically equivalent inputs when non differential readings are separately available. In differential only parts, then all that is required is a consistent labeling. Units after application of scale and offset are millivolts. What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw KernelVersion: 3.17 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no bias removal etc.) current measurement from channel Y. In special cases where the channel does not correspond to externally available input one of the named versions may be used. The number must always be specified and unique to allow association with event codes. Units after application of scale and offset are milliamps. What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw KernelVersion: 3.2 Contact: linux-iio@vger.kernel.org Description: Raw capacitance measurement from channel Y. Units after application of scale and offset are nanofarads. What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw KernelVersion: 3.2 Contact: linux-iio@vger.kernel.org Description: Raw differential capacitance measurement equivalent to channel Y - channel Z where these channel numbers apply to the physically equivalent inputs when non differential readings are separately available. In differential only parts, then all that is required is a consistent labeling. Units after application of scale and offset are nanofarads. What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no bias removal etc.) temperature measurement. If an axis is specified it generally means that the temperature sensor is associated with one part of a compound device (e.g. a gyroscope axis). The ambient and object modifiers distinguish between ambient (reference) and distant temperature for contact- less measurements. Units after application of scale and offset are milli degrees Celsius. What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Scaled temperature measurement in milli degrees Celsius. What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Acceleration in direction x, y or z (may be arbitrarily assigned but should match other such assignments on device). Has all of the equivalent parameters as per voltageY. Units after application of scale and offset are m/s^2. What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Angular velocity about axis x, y or z (may be arbitrarily assigned). Has all the equivalent parameters as per voltageY. Units after application of scale and offset are radians per second. What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Inclination raw reading about axis x, y or z (may be arbitrarily assigned). Data converted by application of offset and scale to degrees. What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Magnetic field along axis x, y or z (may be arbitrarily assigned). Data converted by application of offset then scale to Gauss. What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw KernelVersion: 2.6.36 Contact: linux-iio@vger.kernel.org Description: Highest value since some reset condition. These attributes allow access to this and are otherwise the direct equivalent of the Y[_name]_raw attributes. What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw KernelVersion: 2.6.36 Contact: linux-iio@vger.kernel.org Description: A computed peak value based on the sum squared magnitude of the underlying value in the specified directions. What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw KernelVersion: 3.8 Contact: linux-iio@vger.kernel.org Description: Raw pressure measurement from channel Y. Units after application of scale and offset are kilopascal. What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input KernelVersion: 3.8 Contact: linux-iio@vger.kernel.org Description: Scaled pressure measurement from channel Y, in kilopascal. What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw KernelVersion: 3.14 Contact: linux-iio@vger.kernel.org Description: Raw humidity measurement of air. Units after application of scale and offset are milli percent. What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input KernelVersion: 3.14 Contact: linux-iio@vger.kernel.org Description: Scaled humidity measurement in milli percent. What: /sys/bus/iio/devices/iio:deviceX/in_X_mean_raw KernelVersion: 3.5 Contact: linux-iio@vger.kernel.org Description: Averaged raw measurement from channel X. The number of values used for averaging is device specific. The converting rules for normal raw values also applies to the averaged raw values. What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset What: /sys/bus/iio/devices/iio:deviceX/in_current_offset What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: If known for a device, offset to be added to [Y]_raw prior to scaling by [Y]_scale in order to obtain value in the units as specified in [Y]_raw documentation. Not present if the offset is always 0 or unknown. If Y or axis is not present, then the offset applies to all in channels of . May be writable if a variable offset can be applied on the device. Note that this is different to calibbias which is for devices (or drivers) that apply offsets to compensate for variation between different instances of the part, typically adjusted by using some hardware supported calibration procedure. Calibbias is applied internally, offset is applied in userspace to the _raw output. What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_current_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale What: /sys/bus/iio/devices/iio:deviceX/in_energy_scale What: /sys/bus/iio/devices/iio:deviceX/in_distance_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: If known for a device, scale to be applied to Y[_name]_raw post addition of [Y][_name]_offset in order to obtain the measured value in units as specified in [Y][_name]_raw documentation. If shared across all in channels then Y and are not present and the value is called [Y][_name]_scale. The peak modifier means this value is applied to Y[_name]_peak_raw values. What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Hardware applied calibration offset (assumed to fix production inaccuracies). What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Hardware applied calibration scale factor (assumed to fix production inaccuracies). If shared across all channels, _calibscale is used. What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: Gender of the user (e.g.: male, female) used by some pedometers to compute the stride length, distance, speed and activity type. What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: Lists all available gender values (e.g.: male, female). What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibheight What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibheight What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibheight What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: Height of the user (in meters) used by some pedometers to compute the stride length, distance, speed and activity type. What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibweight KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: Weight of the user (in kg). It is needed by some pedometers to compute the calories burnt by the user. What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available What: /sys/.../iio:deviceX/in_voltageX_scale_available What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available What: /sys/.../iio:deviceX/out_voltageX_scale_available What: /sys/.../iio:deviceX/out_altvoltageX_scale_available What: /sys/.../iio:deviceX/in_capacitance_scale_available What: /sys/.../iio:deviceX/in_pressure_scale_available What: /sys/.../iio:deviceX/in_pressureY_scale_available KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: If a discrete set of scale values is available, they are listed in this attribute. What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Hardware applied gain factor. If shared across all channels, _hardwaregain is used. What: /sys/.../in_accel_filter_low_pass_3db_frequency What: /sys/.../in_magn_filter_low_pass_3db_frequency What: /sys/.../in_anglvel_filter_low_pass_3db_frequency KernelVersion: 3.2 Contact: linux-iio@vger.kernel.org Description: If a known or controllable low pass filter is applied to the underlying data channel, then this parameter gives the 3dB frequency of the filter in Hz. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled, no bias etc.) output voltage for channel Y. The number must always be specified and unique if the output corresponds to a single channel. While DAC like devices typically use out_voltage, a continuous frequency generating device, such as a DDS or PLL should use out_altvoltage. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled, no bias etc.) output voltage for an aggregate of channel Y, channel Z, etc. This interface is available in cases where a single output sets the value for multiple channels simultaneously. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Specifies the output powerdown mode. DAC output stage is disconnected from the amplifier and 1kohm_to_gnd: connected to ground via an 1kOhm resistor, 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 100kohm_to_gnd: connected to ground via an 100kOhm resistor, 500kohm_to_gnd: connected to ground via a 500kOhm resistor, three_state: left floating. For a list of available output power down options read outX_powerdown_mode_available. If Y is not present the mode is shared across all outputs. What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Lists all available output power down modes. If Y is not present the mode is shared across all outputs. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Writing 1 causes output Y to enter the power down mode specified by the corresponding outY_powerdown_mode. DAC output stage is disconnected from the amplifier. Clearing returns to normal operation. Y may be suppressed if all outputs are controlled together. What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org Description: Output frequency for channel Y in Hz. The number must always be specified and unique if the output corresponds to a single channel. What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org Description: Phase in radians of one frequency/clock output Y (out_altvoltageY) relative to another frequency/clock output (out_altvoltageZ) of the device X. The number must always be specified and unique if the output corresponds to a single channel. What: /sys/bus/iio/devices/iio:deviceX/events KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Configuration of which hardware generated events are passed up to user-space. What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Event generated when channel passes a threshold in the specified (_rising|_falling) direction. If the direction is not specified, then either the device will report an event which ever direction a single threshold value is passed in (e.g. [Y][_name]__thresh_value) or [Y][_name]__thresh_rising_value and [Y][_name]__thresh_falling_value may take different values, but the device can only enable both thresholds or neither. Note the driver will assume the last p events requested are to be enabled where p is how many it supports (which may vary depending on the exact set requested. So if you want to be sure you have set what you think you have, check the contents of these attributes after everything is configured. Drivers may have to buffer any parameters so that they are consistent when a given event type is enabled at a future point (and not those for whatever event was previously enabled). What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Event generated when channel passes a threshold on the rate of change (1st differential) in the specified (_rising|_falling) direction. If the direction is not specified, then either the device will report an event which ever direction a single threshold value is passed in (e.g. [Y][_name]__roc_value) or [Y][_name]__roc_rising_value and [Y][_name]__roc_falling_value may take different values, but the device can only enable both rate of change thresholds or neither. Note the driver will assume the last p events requested are to be enabled where p is however many it supports (which may vary depending on the exact set requested. So if you want to be sure you have set what you think you have, check the contents of these attributes after everything is configured. Drivers may have to buffer any parameters so that they are consistent when a given event type is enabled a future point (and not those for whatever event was previously enabled). What: /sys/.../events/in_accel_thresh_rising_value What: /sys/.../events/in_accel_thresh_falling_value What: /sys/.../events/in_accel_x_raw_thresh_rising_value What: /sys/.../events/in_accel_x_raw_thresh_falling_value What: /sys/.../events/in_accel_y_raw_thresh_rising_value What: /sys/.../events/in_accel_y_raw_thresh_falling_value What: /sys/.../events/in_accel_z_raw_thresh_rising_value What: /sys/.../events/in_accel_z_raw_thresh_falling_value What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value What: /sys/.../events/in_magn_x_raw_thresh_rising_value What: /sys/.../events/in_magn_x_raw_thresh_falling_value What: /sys/.../events/in_magn_y_raw_thresh_rising_value What: /sys/.../events/in_magn_y_raw_thresh_falling_value What: /sys/.../events/in_magn_z_raw_thresh_rising_value What: /sys/.../events/in_magn_z_raw_thresh_falling_value What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value What: /sys/.../events/in_voltageY_raw_thresh_rising_value What: /sys/.../events/in_voltageY_raw_thresh_falling_value What: /sys/.../events/in_tempY_raw_thresh_rising_value What: /sys/.../events/in_tempY_raw_thresh_falling_value What: /sys/.../events/in_illuminance0_thresh_falling_value what: /sys/.../events/in_illuminance0_thresh_rising_value what: /sys/.../events/in_proximity0_thresh_falling_value what: /sys/.../events/in_proximity0_thresh_rising_value KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Specifies the value of threshold that the device is comparing against for the events enabled by Y[_name]_thresh[_rising|falling]_en. If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions. The raw or input element of the name indicates whether the value is in raw device units or in processed units (as _raw and _input do on sysfs direct channel read attributes). What: /sys/.../events/in_accel_scale What: /sys/.../events/in_accel_peak_scale What: /sys/.../events/in_anglvel_scale What: /sys/.../events/in_magn_scale What: /sys/.../events/in_rot_from_north_magnetic_scale What: /sys/.../events/in_rot_from_north_true_scale What: /sys/.../events/in_voltage_scale What: /sys/.../events/in_voltage_supply_scale What: /sys/.../events/in_temp_scale What: /sys/.../events/in_illuminance_scale What: /sys/.../events/in_proximity_scale KernelVersion: 3.21 Contact: linux-iio@vger.kernel.org Description: Specifies the conversion factor from the standard units to device specific units used to set the event trigger threshold. What: /sys/.../events/in_accel_x_thresh_rising_hysteresis What: /sys/.../events/in_accel_x_thresh_falling_hysteresis What: /sys/.../events/in_accel_x_thresh_either_hysteresis What: /sys/.../events/in_accel_y_thresh_rising_hysteresis What: /sys/.../events/in_accel_y_thresh_falling_hysteresis What: /sys/.../events/in_accel_y_thresh_either_hysteresis What: /sys/.../events/in_accel_z_thresh_rising_hysteresis What: /sys/.../events/in_accel_z_thresh_falling_hysteresis What: /sys/.../events/in_accel_z_thresh_either_hysteresis What: /sys/.../events/in_anglvel_x_thresh_rising_hysteresis What: /sys/.../events/in_anglvel_x_thresh_falling_hysteresis What: /sys/.../events/in_anglvel_x_thresh_either_hysteresis What: /sys/.../events/in_anglvel_y_thresh_rising_hysteresis What: /sys/.../events/in_anglvel_y_thresh_falling_hysteresis What: /sys/.../events/in_anglvel_y_thresh_either_hysteresis What: /sys/.../events/in_anglvel_z_thresh_rising_hysteresis What: /sys/.../events/in_anglvel_z_thresh_falling_hysteresis What: /sys/.../events/in_anglvel_z_thresh_either_hysteresis What: /sys/.../events/in_magn_x_thresh_rising_hysteresis What: /sys/.../events/in_magn_x_thresh_falling_hysteresis What: /sys/.../events/in_magn_x_thresh_either_hysteresis What: /sys/.../events/in_magn_y_thresh_rising_hysteresis What: /sys/.../events/in_magn_y_thresh_falling_hysteresis What: /sys/.../events/in_magn_y_thresh_either_hysteresis What: /sys/.../events/in_magn_z_thresh_rising_hysteresis What: /sys/.../events/in_magn_z_thresh_falling_hysteresis What: /sys/.../events/in_magn_z_thresh_either_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis What: /sys/.../events/in_voltageY_thresh_rising_hysteresis What: /sys/.../events/in_voltageY_thresh_falling_hysteresis What: /sys/.../events/in_voltageY_thresh_either_hysteresis What: /sys/.../events/in_tempY_thresh_rising_hysteresis What: /sys/.../events/in_tempY_thresh_falling_hysteresis What: /sys/.../events/in_tempY_thresh_either_hysteresis What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis what: /sys/.../events/in_illuminance0_thresh_rising_hysteresis what: /sys/.../events/in_illuminance0_thresh_either_hysteresis what: /sys/.../events/in_proximity0_thresh_falling_hysteresis what: /sys/.../events/in_proximity0_thresh_rising_hysteresis what: /sys/.../events/in_proximity0_thresh_either_hysteresis KernelVersion: 3.13 Contact: linux-iio@vger.kernel.org Description: Specifies the hysteresis of threshold that the device is comparing against for the events enabled by Y[_name]_thresh[_(rising|falling)]_hysteresis. If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single hysteresis value applies to both directions. For falling events the hysteresis is added to the _value attribute for this event to get the upper threshold for when the event goes back to normal, for rising events the hysteresis is subtracted from the _value attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200 and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event will get activated once in_voltage0_raw goes above 1200 and will become deactived again once the value falls below 1150. What: /sys/.../events/in_accel_x_raw_roc_rising_value What: /sys/.../events/in_accel_x_raw_roc_falling_value What: /sys/.../events/in_accel_y_raw_roc_rising_value What: /sys/.../events/in_accel_y_raw_roc_falling_value What: /sys/.../events/in_accel_z_raw_roc_rising_value What: /sys/.../events/in_accel_z_raw_roc_falling_value What: /sys/.../events/in_anglvel_x_raw_roc_rising_value What: /sys/.../events/in_anglvel_x_raw_roc_falling_value What: /sys/.../events/in_anglvel_y_raw_roc_rising_value What: /sys/.../events/in_anglvel_y_raw_roc_falling_value What: /sys/.../events/in_anglvel_z_raw_roc_rising_value What: /sys/.../events/in_anglvel_z_raw_roc_falling_value What: /sys/.../events/in_magn_x_raw_roc_rising_value What: /sys/.../events/in_magn_x_raw_roc_falling_value What: /sys/.../events/in_magn_y_raw_roc_rising_value What: /sys/.../events/in_magn_y_raw_roc_falling_value What: /sys/.../events/in_magn_z_raw_roc_rising_value What: /sys/.../events/in_magn_z_raw_roc_falling_value What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value What: /sys/.../events/in_voltageY_raw_roc_rising_value What: /sys/.../events/in_voltageY_raw_roc_falling_value What: /sys/.../events/in_tempY_raw_roc_rising_value What: /sys/.../events/in_tempY_raw_roc_falling_value KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Specifies the value of rate of change threshold that the device is comparing against for the events enabled by [Y][_name]_roc[_rising|falling]_en. If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions. The raw or input element of the name indicates whether the value is in raw device units or in processed units (as _raw and _input do on sysfs direct channel read attributes). What: /sys/.../events/in_accel_x_thresh_rising_period What: /sys/.../events/in_accel_x_thresh_falling_period hat: /sys/.../events/in_accel_x_roc_rising_period What: /sys/.../events/in_accel_x_roc_falling_period What: /sys/.../events/in_accel_y_thresh_rising_period What: /sys/.../events/in_accel_y_thresh_falling_period What: /sys/.../events/in_accel_y_roc_rising_period What: /sys/.../events/in_accel_y_roc_falling_period What: /sys/.../events/in_accel_z_thresh_rising_period What: /sys/.../events/in_accel_z_thresh_falling_period What: /sys/.../events/in_accel_z_roc_rising_period What: /sys/.../events/in_accel_z_roc_falling_period What: /sys/.../events/in_anglvel_x_thresh_rising_period What: /sys/.../events/in_anglvel_x_thresh_falling_period What: /sys/.../events/in_anglvel_x_roc_rising_period What: /sys/.../events/in_anglvel_x_roc_falling_period What: /sys/.../events/in_anglvel_y_thresh_rising_period What: /sys/.../events/in_anglvel_y_thresh_falling_period What: /sys/.../events/in_anglvel_y_roc_rising_period What: /sys/.../events/in_anglvel_y_roc_falling_period What: /sys/.../events/in_anglvel_z_thresh_rising_period What: /sys/.../events/in_anglvel_z_thresh_falling_period What: /sys/.../events/in_anglvel_z_roc_rising_period What: /sys/.../events/in_anglvel_z_roc_falling_period What: /sys/.../events/in_magn_x_thresh_rising_period What: /sys/.../events/in_magn_x_thresh_falling_period What: /sys/.../events/in_magn_x_roc_rising_period What: /sys/.../events/in_magn_x_roc_falling_period What: /sys/.../events/in_magn_y_thresh_rising_period What: /sys/.../events/in_magn_y_thresh_falling_period What: /sys/.../events/in_magn_y_roc_rising_period What: /sys/.../events/in_magn_y_roc_falling_period What: /sys/.../events/in_magn_z_thresh_rising_period What: /sys/.../events/in_magn_z_thresh_falling_period What: /sys/.../events/in_magn_z_roc_rising_period What: /sys/.../events/in_magn_z_roc_falling_period What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period What: /sys/.../events/in_rot_from_north_true_thresh_rising_period What: /sys/.../events/in_rot_from_north_true_thresh_falling_period What: /sys/.../events/in_rot_from_north_true_roc_rising_period What: /sys/.../events/in_rot_from_north_true_roc_falling_period What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period What: /sys/.../events/in_voltageY_supply_thresh_rising_period What: /sys/.../events/in_voltageY_supply_thresh_falling_period What: /sys/.../events/in_voltageY_supply_roc_rising_period What: /sys/.../events/in_voltageY_supply_roc_falling_period What: /sys/.../events/in_voltageY_thresh_rising_period What: /sys/.../events/in_voltageY_thresh_falling_period What: /sys/.../events/in_voltageY_roc_rising_period What: /sys/.../events/in_voltageY_roc_falling_period What: /sys/.../events/in_tempY_thresh_rising_period What: /sys/.../events/in_tempY_thresh_falling_period What: /sys/.../events/in_tempY_roc_rising_period What: /sys/.../events/in_tempY_roc_falling_period What: /sys/.../events/in_accel_x&y&z_mag_falling_period What: /sys/.../events/in_intensity0_thresh_period What: /sys/.../events/in_proximity0_thresh_period What: /sys/.../events/in_activity_still_thresh_rising_period What: /sys/.../events/in_activity_still_thresh_falling_period What: /sys/.../events/in_activity_walking_thresh_rising_period What: /sys/.../events/in_activity_walking_thresh_falling_period What: /sys/.../events/in_activity_jogging_thresh_rising_period What: /sys/.../events/in_activity_jogging_thresh_falling_period What: /sys/.../events/in_activity_running_thresh_rising_period What: /sys/.../events/in_activity_running_thresh_falling_period KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Period of time (in seconds) for which the condition must be met before an event is generated. If direction is not specified then this period applies to both directions. What: /sys/.../events/in_activity_still_thresh_rising_en What: /sys/.../events/in_activity_still_thresh_falling_en What: /sys/.../events/in_activity_walking_thresh_rising_en What: /sys/.../events/in_activity_walking_thresh_falling_en What: /sys/.../events/in_activity_jogging_thresh_rising_en What: /sys/.../events/in_activity_jogging_thresh_falling_en What: /sys/.../events/in_activity_running_thresh_rising_en What: /sys/.../events/in_activity_running_thresh_falling_en KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: Enables or disables activitity events. Depending on direction an event is generated when sensor ENTERS or LEAVES a given state. What: /sys/.../events/in_activity_still_thresh_rising_value What: /sys/.../events/in_activity_still_thresh_falling_value What: /sys/.../events/in_activity_walking_thresh_rising_value What: /sys/.../events/in_activity_walking_thresh_falling_value What: /sys/.../events/in_activity_jogging_thresh_rising_value What: /sys/.../events/in_activity_jogging_thresh_falling_value What: /sys/.../events/in_activity_running_thresh_rising_value What: /sys/.../events/in_activity_running_thresh_falling_value KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: Confidence value (in units as percentage) to be used for deciding when an event should be generated. E.g for running: If the confidence value reported by the sensor is greater than in_activity_running_thresh_rising_value then the sensor ENTERS running state. Conversely, if the confidence value reported by the sensor is lower than in_activity_running_thresh_falling_value then the sensor is LEAVING running state. What: /sys/.../iio:deviceX/events/in_accel_mag_en What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en What: /sys/.../iio:deviceX/events/in_accel_x_mag_en What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en What: /sys/.../iio:deviceX/events/in_accel_y_mag_en What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en What: /sys/.../iio:deviceX/events/in_accel_z_mag_en What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Similar to in_accel_x_thresh[_rising|_falling]_en, but here the magnitude of the channel is compared to the threshold, not its signed value. What: /sys/.../events/in_accel_raw_mag_value What: /sys/.../events/in_accel_x_raw_mag_rising_value What: /sys/.../events/in_accel_y_raw_mag_rising_value What: /sys/.../events/in_accel_z_raw_mag_rising_value KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: The value to which the magnitude of the channel is compared. If number or direction is not specified, applies to all channels of this type. What: /sys/.../events/in_steps_change_en KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: Event generated when channel passes a threshold on the absolute change in value. E.g. for steps: a step change event is generated each time the user takes N steps, where N is set using in_steps_change_value. What: /sys/.../events/in_steps_change_value KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: Specifies the value of change threshold that the device is comparing against for the events enabled by [Y][_name]_roc[_rising|falling|]_en. E.g. for steps: if set to 3, a step change event will be generated every 3 steps. What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: The name of the trigger source being used, as per string given in /sys/class/iio/triggerY/name. What: /sys/bus/iio/devices/iio:deviceX/buffer/length KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Number of scans contained by the buffer. What: /sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Bytes per scan. Due to alignment fun, the scan may be larger than implied directly by the scan_element parameters. What: /sys/bus/iio/devices/iio:deviceX/buffer/enable KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Actually start the buffer capture up. Will start trigger if first device and appropriate. What: /sys/bus/iio/devices/iio:deviceX/scan_elements KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Directory containing interfaces for elements that will be captured for a single triggered sample set in the buffer. What: /sys/.../iio:deviceX/scan_elements/in_accel_x_en What: /sys/.../iio:deviceX/scan_elements/in_accel_y_en What: /sys/.../iio:deviceX/scan_elements/in_accel_z_en What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_en What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_en What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en What: /sys/.../iio:deviceX/scan_elements/in_pressure_en What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en What: /sys/.../iio:deviceX/scan_elements/in_proximity_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Scan element control for triggered data capture. What: /sys/.../iio:deviceX/scan_elements/in_accel_type What: /sys/.../iio:deviceX/scan_elements/in_anglvel_type What: /sys/.../iio:deviceX/scan_elements/in_magn_type What: /sys/.../iio:deviceX/scan_elements/in_incli_type What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type What: /sys/.../iio:deviceX/scan_elements/in_voltage_type What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type What: /sys/.../iio:deviceX/scan_elements/in_pressure_type What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type What: /sys/.../iio:deviceX/scan_elements/in_proximity_type KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Description of the scan element data storage within the buffer and hence the form in which it is read from user-space. Form is [be|le]:[s|u]bits/storagebits[>>shift]. be or le specifies big or little endian. s or u specifies if signed (2's complement) or unsigned. bits is the number of bits of data and storagebits is the space (after padding) that it occupies in the buffer. shift if specified, is the shift that needs to be applied prior to masking out unused bits. Some devices put their data in the middle of the transferred elements with additional information on both sides. Note that some devices will have additional information in the unused bits so to get a clean value, the bits value must be used to mask the buffer output value appropriately. The storagebits value also specifies the data alignment. So s48/64>>2 will be a signed 48 bit integer stored in a 64 bit location aligned to a 64 bit boundary. To obtain the clean value, shift right 2 and apply a mask to zero the top 16 bits of the result. For other storage combinations this attribute will be extended appropriately. What: /sys/.../iio:deviceX/scan_elements/in_accel_type_available KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: If the type parameter can take one of a small set of values, this attribute lists them. What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_index What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_index What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index What: /sys/.../iio:deviceX/scan_elements/in_pressureY_index What: /sys/.../iio:deviceX/scan_elements/in_pressure_index What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index What: /sys/.../iio:deviceX/scan_elements/in_proximity_index KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: A single positive integer specifying the position of this scan element in the buffer. Note these are not dependent on what is enabled and may not be contiguous. Thus for user-space to establish the full layout these must be used in conjunction with all _en attributes to establish which channels are present, and the relevant _type attributes to establish the data storage format. What: /sys/.../iio:deviceX/in_activity_still_input What: /sys/.../iio:deviceX/in_activity_walking_input What: /sys/.../iio:deviceX/in_activity_jogging_input What: /sys/.../iio:deviceX/in_activity_running_input KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the confidence for an activity expressed in units as percentage. What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the amount of quadrature error present in the device at a given time. What: /sys/.../iio:deviceX/in_accelX_power_mode KernelVersion: 3.11 Contact: linux-iio@vger.kernel.org Description: Specifies the chip power mode. low_noise: reduce noise level from ADC, low_power: enable low current consumption. For a list of available output power modes read in_accel_power_mode_available. What: /sys/.../iio:deviceX/in_energy_input What: /sys/.../iio:deviceX/in_energy_raw KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the energy value reported by the device (e.g.: human activity sensors report energy burnt by the user). Units after application of scale are Joules. What: /sys/.../iio:deviceX/in_distance_input What: /sys/.../iio:deviceX/in_distance_raw KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the distance covered by the user since the last reboot while activated. Units after application of scale are meters. What: /sys/bus/iio/devices/iio:deviceX/store_eeprom KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org Description: Writing '1' stores the current device configuration into on-chip EEPROM. After power-up or chip reset the device will automatically load the saved configuration. What: /sys/.../iio:deviceX/in_proximity_raw What: /sys/.../iio:deviceX/in_proximity_input What: /sys/.../iio:deviceX/in_proximityY_raw KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Proximity measurement indicating that some object is near the sensor, usually be observing reflectivity of infrared or ultrasound emitted. Often these sensors are unit less and as such conversion to SI units is not possible. Where it is, the units should be meters. If such a conversion is not possible, the reported values should behave in the same way as a distance, i.e. lower values indicate something is closer to the sensor. What: /sys/.../iio:deviceX/in_illuminanceY_input What: /sys/.../iio:deviceX/in_illuminanceY_raw What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Illuminance measurement, units after application of scale and offset are lux. What: /sys/.../iio:deviceX/in_intensityY_raw What: /sys/.../iio:deviceX/in_intensityY_ir_raw What: /sys/.../iio:deviceX/in_intensityY_both_raw KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Unit-less light intensity. Modifiers both and ir indicate that measurements contains visible and infrared light components or just infrared light, respectively. What: /sys/.../iio:deviceX/in_intensity_red_integration_time What: /sys/.../iio:deviceX/in_intensity_green_integration_time What: /sys/.../iio:deviceX/in_intensity_blue_integration_time What: /sys/.../iio:deviceX/in_intensity_clear_integration_time What: /sys/.../iio:deviceX/in_illuminance_integration_time KernelVersion: 3.12 Contact: linux-iio@vger.kernel.org Description: This attribute is used to get/set the integration time in seconds. What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: Number of seconds in which to compute speed. What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw KernelVersion: 3.15 Contact: linux-iio@vger.kernel.org Description: Raw value of quaternion components using a format x y z w. Here x, y, and z component represents the axis about which a rotation will occur and w component represents the amount of rotation. What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw KernelVersion: 3.15 Contact: linux-iio@vger.kernel.org Description: Raw value of rotation from true/magnetic north measured with or without compensation from tilt sensors. What: /sys/bus/iio/devices/iio:deviceX/in_currentX_raw KernelVersion: 3.18 Contact: linux-iio@vger.kernel.org Description: Raw current measurement from channel X. Units are in milliamps after application of scale and offset. If no offset or scale is present, output should be considered as processed with the unit in milliamps. What: /sys/.../iio:deviceX/in_energy_en What: /sys/.../iio:deviceX/in_distance_en What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en What: /sys/.../iio:deviceX/in_steps_en KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: Activates a device feature that runs in firmware/hardware. E.g. for steps: the pedometer saves power while not used; when activated, it will count the steps taken by the user in firmware and export them through in_steps_input. What: /sys/.../iio:deviceX/in_steps_input KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the number of steps taken by the user since the last reboot while activated. What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the current speed value of the user (which is the norm or magnitude of the velocity vector). Units after application of scale are m/s. What: /sys/.../iio:deviceX/in_steps_debounce_count KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: Specifies the number of steps that must occur within in_steps_filter_debounce_time for the pedometer to decide the consumer is making steps. What: /sys/.../iio:deviceX/in_steps_debounce_time KernelVersion: 3.20 Contact: linux-iio@vger.kernel.org Description: Specifies number of seconds in which we compute the steps that occur in order to decide if the consumer is making steps.