#include "drxk_map.h" #define DRXK_VERSION_MAJOR 0 #define DRXK_VERSION_MINOR 9 #define DRXK_VERSION_PATCH 4300 #define HI_I2C_DELAY 42 #define HI_I2C_BRIDGE_DELAY 350 #define DRXK_MAX_RETRIES 100 #define DRIVER_4400 1 #define DRXX_JTAGID 0x039210D9 #define DRXX_J_JTAGID 0x239310D9 #define DRXX_K_JTAGID 0x039210D9 #define DRX_UNKNOWN 254 #define DRX_AUTO 255 #define DRX_SCU_READY 0 #define DRXK_MAX_WAITTIME (200) #define SCU_RESULT_OK 0 #define SCU_RESULT_SIZE -4 #define SCU_RESULT_INVPAR -3 #define SCU_RESULT_UNKSTD -2 #define SCU_RESULT_UNKCMD -1 #ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT #define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200) #endif #define DRXK_8VSB_MPEG_BIT_RATE 19392658UL /*bps*/ #define DRXK_DVBT_MPEG_BIT_RATE 32000000UL /*bps*/ #define DRXK_QAM16_MPEG_BIT_RATE 27000000UL /*bps*/ #define DRXK_QAM32_MPEG_BIT_RATE 33000000UL /*bps*/ #define DRXK_QAM64_MPEG_BIT_RATE 40000000UL /*bps*/ #define DRXK_QAM128_MPEG_BIT_RATE 46000000UL /*bps*/ #define DRXK_QAM256_MPEG_BIT_RATE 52000000UL /*bps*/ #define DRXK_MAX_MPEG_BIT_RATE 52000000UL /*bps*/ #define IQM_CF_OUT_ENA_OFDM__M 0x4 #define IQM_FS_ADJ_SEL_B_QAM 0x1 #define IQM_FS_ADJ_SEL_B_OFF 0x0 #define IQM_FS_ADJ_SEL_B_VSB 0x2 #define IQM_RC_ADJ_SEL_B_OFF 0x0 #define IQM_RC_ADJ_SEL_B_QAM 0x1 #define IQM_RC_ADJ_SEL_B_VSB 0x2 enum OperationMode { OM_NONE, OM_QAM_ITU_A, OM_QAM_ITU_B, OM_QAM_ITU_C, OM_DVBT }; enum DRXPowerMode { DRX_POWER_UP = 0, DRX_POWER_MODE_1, DRX_POWER_MODE_2, DRX_POWER_MODE_3, DRX_POWER_MODE_4, DRX_POWER_MODE_5, DRX_POWER_MODE_6, DRX_POWER_MODE_7, DRX_POWER_MODE_8, DRX_POWER_MODE_9, DRX_POWER_MODE_10, DRX_POWER_MODE_11, DRX_POWER_MODE_12, DRX_POWER_MODE_13, DRX_POWER_MODE_14, DRX_POWER_MODE_15, DRX_POWER_MODE_16, DRX_POWER_DOWN = 255 }; /** /brief Intermediate power mode for DRXK, power down OFDM clock domain */ #ifndef DRXK_POWER_DOWN_OFDM #define DRXK_POWER_DOWN_OFDM DRX_POWER_MODE_1 #endif /** /brief Intermediate power mode for DRXK, power down core (sysclk) */ #ifndef DRXK_POWER_DOWN_CORE #define DRXK_POWER_DOWN_CORE DRX_POWER_MODE_9 #endif /** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */ #ifndef DRXK_POWER_DOWN_PLL #define DRXK_POWER_DOWN_PLL DRX_POWER_MODE_10 #endif enum AGC_CTRL_MODE { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF }; enum EDrxkState { DRXK_UNINITIALIZED = 0, DRXK_STOPPED, DRXK_DTV_STARTED, DRXK_ATV_STARTED, DRXK_POWERED_DOWN }; enum EDrxkCoefArrayIndex { DRXK_COEF_IDX_MN = 0, DRXK_COEF_IDX_FM , DRXK_COEF_IDX_L , DRXK_COEF_IDX_LP , DRXK_COEF_IDX_BG , DRXK_COEF_IDX_DK , DRXK_COEF_IDX_I , DRXK_COEF_IDX_MAX }; enum EDrxkSifAttenuation { DRXK_SIF_ATTENUATION_0DB, DRXK_SIF_ATTENUATION_3DB, DRXK_SIF_ATTENUATION_6DB, DRXK_SIF_ATTENUATION_9DB }; enum EDrxkConstellation { DRX_CONSTELLATION_BPSK = 0, DRX_CONSTELLATION_QPSK, DRX_CONSTELLATION_PSK8, DRX_CONSTELLATION_QAM16, DRX_CONSTELLATION_QAM32, DRX_CONSTELLATION_QAM64, DRX_CONSTELLATION_QAM128, DRX_CONSTELLATION_QAM256, DRX_CONSTELLATION_QAM512, DRX_CONSTELLATION_QAM1024, DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN, DRX_CONSTELLATION_AUTO = DRX_AUTO }; enum EDrxkInterleaveMode { DRXK_QAM_I12_J17 = 16, DRXK_QAM_I_UNKNOWN = DRX_UNKNOWN }; enum { DRXK_SPIN_A1 = 0, DRXK_SPIN_A2, DRXK_SPIN_A3, DRXK_SPIN_UNKNOWN }; enum DRXKCfgDvbtSqiSpeed { DRXK_DVBT_SQI_SPEED_FAST = 0, DRXK_DVBT_SQI_SPEED_MEDIUM, DRXK_DVBT_SQI_SPEED_SLOW, DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN } ; enum DRXFftmode_t { DRX_FFTMODE_2K = 0, DRX_FFTMODE_4K, DRX_FFTMODE_8K, DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN, DRX_FFTMODE_AUTO = DRX_AUTO }; enum DRXMPEGStrWidth_t { DRX_MPEG_STR_WIDTH_1, DRX_MPEG_STR_WIDTH_8 }; enum DRXQamLockRange_t { DRX_QAM_LOCKRANGE_NORMAL, DRX_QAM_LOCKRANGE_EXTENDED }; struct DRXKCfgDvbtEchoThres_t { u16 threshold; enum DRXFftmode_t fftMode; } ; struct SCfgAgc { enum AGC_CTRL_MODE ctrlMode; /* off, user, auto */ u16 outputLevel; /* range dependent on AGC */ u16 minOutputLevel; /* range dependent on AGC */ u16 maxOutputLevel; /* range dependent on AGC */ u16 speed; /* range dependent on AGC */ u16 top; /* rf-agc take over point */ u16 cutOffCurrent; /* rf-agc is accelerated if output current is below cut-off current */ u16 IngainTgtMax; u16 FastClipCtrlDelay; }; struct SCfgPreSaw { u16 reference; /* pre SAW reference value, range 0 .. 31 */ bool usePreSaw; /* TRUE algorithms must use pre SAW sense */ }; struct DRXKOfdmScCmd_t { u16 cmd; /**< Command number */ u16 subcmd; /**< Sub-command parameter*/ u16 param0; /**< General purpous param */ u16 param1; /**< General purpous param */ u16 param2; /**< General purpous param */ u16 param3; /**< General purpous param */ u16 param4; /**< General purpous param */ }; struct drxk_state { struct dvb_frontend c_frontend; struct dvb_frontend t_frontend; struct dtv_frontend_properties props; struct device *dev; struct i2c_adapter *i2c; u8 demod_address; void *priv; struct mutex mutex; struct mutex ctlock; u32 m_Instance; /**< Channel 1,2,3 or 4 */ int m_ChunkSize; u8 Chunk[256]; bool m_hasLNA; bool m_hasDVBT; bool m_hasDVBC; bool m_hasAudio; bool m_hasATV; bool m_hasOOB; bool m_hasSAWSW; /**< TRUE if mat_tx is available */ bool m_hasGPIO1; /**< TRUE if mat_rx is available */ bool m_hasGPIO2; /**< TRUE if GPIO is available */ bool m_hasIRQN; /**< TRUE if IRQN is available */ u16 m_oscClockFreq; u16 m_HICfgTimingDiv; u16 m_HICfgBridgeDelay; u16 m_HICfgWakeUpKey; u16 m_HICfgTimeout; u16 m_HICfgCtrl; s32 m_sysClockFreq; /**< system clock frequency in kHz */ enum EDrxkState m_DrxkState; /**< State of Drxk (init,stopped,started) */ enum OperationMode m_OperationMode; /**< digital standards */ struct SCfgAgc m_vsbRfAgcCfg; /**< settings for VSB RF-AGC */ struct SCfgAgc m_vsbIfAgcCfg; /**< settings for VSB IF-AGC */ u16 m_vsbPgaCfg; /**< settings for VSB PGA */ struct SCfgPreSaw m_vsbPreSawCfg; /**< settings for pre SAW sense */ s32 m_Quality83percent; /**< MER level (*0.1 dB) for 83% quality indication */ s32 m_Quality93percent; /**< MER level (*0.1 dB) for 93% quality indication */ bool m_smartAntInverted; bool m_bDebugEnableBridge; bool m_bPDownOpenBridge; /**< only open DRXK bridge before power-down once it has been accessed */ bool m_bPowerDown; /**< Power down when not used */ u32 m_IqmFsRateOfs; /**< frequency shift as written to DRXK register (28bit fixpoint) */ bool m_enableMPEGOutput; /**< If TRUE, enable MPEG output */ bool m_insertRSByte; /**< If TRUE, insert RS byte */ bool m_enableParallel; /**< If TRUE, parallel out otherwise serial */ bool m_invertDATA; /**< If TRUE, invert DATA signals */ bool m_invertERR; /**< If TRUE, invert ERR signal */ bool m_invertSTR; /**< If TRUE, invert STR signals */ bool m_invertVAL; /**< If TRUE, invert VAL signals */ bool m_invertCLK; /**< If TRUE, invert CLK signals */ bool m_DVBCStaticCLK; bool m_DVBTStaticCLK; /**< If TRUE, static MPEG clockrate will be used, otherwise clockrate will adapt to the bitrate of the TS */ u32 m_DVBTBitrate; u32 m_DVBCBitrate; u8 m_TSDataStrength; u8 m_TSClockkStrength; bool m_itut_annex_c; /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */ enum DRXMPEGStrWidth_t m_widthSTR; /**< MPEG start width */ u32 m_mpegTsStaticBitrate; /**< Maximum bitrate in b/s in case static clockrate is selected */ /* LARGE_INTEGER m_StartTime; */ /**< Contains the time of the last demod start */ s32 m_MpegLockTimeOut; /**< WaitForLockStatus Timeout (counts from start time) */ s32 m_DemodLockTimeOut; /**< WaitForLockStatus Timeout (counts from start time) */ bool m_disableTEIhandling; bool m_RfAgcPol; bool m_IfAgcPol; struct SCfgAgc m_atvRfAgcCfg; /**< settings for ATV RF-AGC */ struct SCfgAgc m_atvIfAgcCfg; /**< settings for ATV IF-AGC */ struct SCfgPreSaw m_atvPreSawCfg; /**< settings for ATV pre SAW sense */ bool m_phaseCorrectionBypass; s16 m_atvTopVidPeak; u16 m_atvTopNoiseTh; enum EDrxkSifAttenuation m_sifAttenuation; bool m_enableCVBSOutput; bool m_enableSIFOutput; bool m_bMirrorFreqSpect; enum EDrxkConstellation m_Constellation; /**< Constellation type of the channel */ u32 m_CurrSymbolRate; /**< Current QAM symbol rate */ struct SCfgAgc m_qamRfAgcCfg; /**< settings for QAM RF-AGC */ struct SCfgAgc m_qamIfAgcCfg; /**< settings for QAM IF-AGC */ u16 m_qamPgaCfg; /**< settings for QAM PGA */ struct SCfgPreSaw m_qamPreSawCfg; /**< settings for QAM pre SAW sense */ enum EDrxkInterleaveMode m_qamInterleaveMode; /**< QAM Interleave mode */ u16 m_fecRsPlen; u16 m_fecRsPrescale; enum DRXKCfgDvbtSqiSpeed m_sqiSpeed; u16 m_GPIO; u16 m_GPIOCfg; struct SCfgAgc m_dvbtRfAgcCfg; /**< settings for QAM RF-AGC */ struct SCfgAgc m_dvbtIfAgcCfg; /**< settings for QAM IF-AGC */ struct SCfgPreSaw m_dvbtPreSawCfg; /**< settings for QAM pre SAW sense */ u16 m_agcFastClipCtrlDelay; bool m_adcCompPassed; u16 m_adcCompCoef[64]; u16 m_adcState; u8 *m_microcode; int m_microcode_length; bool m_DRXK_A1_PATCH_CODE; bool m_DRXK_A1_ROM_CODE; bool m_DRXK_A2_ROM_CODE; bool m_DRXK_A3_ROM_CODE; bool m_DRXK_A2_PATCH_CODE; bool m_DRXK_A3_PATCH_CODE; bool m_rfmirror; u8 m_deviceSpin; u32 m_iqmRcRate; enum DRXPowerMode m_currentPowerMode; /* * Configurable parameters at the driver. They stores the values found * at struct drxk_config. */ u16 UIO_mask; /* Bits used by UIO */ bool single_master; bool no_i2c_bridge; bool antenna_dvbt; u16 antenna_gpio; const char *microcode_name; }; #define NEVER_LOCK 0 #define NOT_LOCKED 1 #define DEMOD_LOCK 2 #define FEC_LOCK 3 #define MPEG_LOCK 4