/* * specialix.c -- specialix IO8+ multiport serial driver. * * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) * * Specialix pays for the development and support of this driver. * Please DO contact io8-linux@specialix.co.uk if you require * support. But please read the documentation (specialix.txt) * first. * * This driver was developped in the BitWizard linux device * driver service. If you require a linux device driver for your * product, please contact devices@BitWizard.nl for a quote. * * This code is firmly based on the riscom/8 serial driver, * written by Dmitry Gorodchanin. The specialix IO8+ card * programming information was obtained from the CL-CD1865 Data * Book, and Specialix document number 6200059: IO8+ Hardware * Functional Specification. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be * useful, but WITHOUT ANY WARRANTY; without even the implied * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR * PURPOSE. See the GNU General Public License for more details. * * You should have received a copy of the GNU General Public * License along with this program; if not, write to the Free * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, * USA. * * Revision history: * * Revision 1.0: April 1st 1997. * Initial release for alpha testing. * Revision 1.1: April 14th 1997. * Incorporated Richard Hudsons suggestions, * removed some debugging printk's. * Revision 1.2: April 15th 1997. * Ported to 2.1.x kernels. * Revision 1.3: April 17th 1997 * Backported to 2.0. (Compatibility macros). * Revision 1.4: April 18th 1997 * Fixed DTR/RTS bug that caused the card to indicate * "don't send data" to a modem after the password prompt. * Fixed bug for premature (fake) interrupts. * Revision 1.5: April 19th 1997 * fixed a minor typo in the header file, cleanup a little. * performance warnings are now MAXed at once per minute. * Revision 1.6: May 23 1997 * Changed the specialix=... format to include interrupt. * Revision 1.7: May 27 1997 * Made many more debug printk's a compile time option. * Revision 1.8: Jul 1 1997 * port to linux-2.1.43 kernel. * Revision 1.9: Oct 9 1998 * Added stuff for the IO8+/PCI version. * Revision 1.10: Oct 22 1999 / Jan 21 2000. * Added stuff for setserial. * Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr) * */ #define VERSION "1.11" /* * There is a bunch of documentation about the card, jumpers, config * settings, restrictions, cables, device names and numbers in * Documentation/serial/specialix.txt */ #include <linux/module.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/errno.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/mm.h> #include <linux/serial.h> #include <linux/smp_lock.h> #include <linux/fcntl.h> #include <linux/major.h> #include <linux/delay.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/uaccess.h> #include <linux/gfp.h> #include "specialix_io8.h" #include "cd1865.h" /* This driver can spew a whole lot of debugging output at you. If you need maximum performance, you should disable the DEBUG define. To aid in debugging in the field, I'm leaving the compile-time debug features enabled, and disable them "runtime". That allows me to instruct people with problems to enable debugging without requiring them to recompile... */ #define DEBUG static int sx_debug; static int sx_rxfifo = SPECIALIX_RXFIFO; static int sx_rtscts; #ifdef DEBUG #define dprintk(f, str...) if (sx_debug & f) printk(str) #else #define dprintk(f, str...) /* nothing */ #endif #define SX_DEBUG_FLOW 0x0001 #define SX_DEBUG_DATA 0x0002 #define SX_DEBUG_PROBE 0x0004 #define SX_DEBUG_CHAN 0x0008 #define SX_DEBUG_INIT 0x0010 #define SX_DEBUG_RX 0x0020 #define SX_DEBUG_TX 0x0040 #define SX_DEBUG_IRQ 0x0080 #define SX_DEBUG_OPEN 0x0100 #define SX_DEBUG_TERMIOS 0x0200 #define SX_DEBUG_SIGNALS 0x0400 #define SX_DEBUG_FIFO 0x0800 #define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__) #define func_exit() dprintk(SX_DEBUG_FLOW, "io8: exit %s\n", __func__) /* Configurable options: */ /* Am I paranoid or not ? ;-) */ #define SPECIALIX_PARANOIA_CHECK /* * The following defines are mostly for testing purposes. But if you need * some nice reporting in your syslog, you can define them also. */ #undef SX_REPORT_FIFO #undef SX_REPORT_OVERRUN #define SPECIALIX_LEGAL_FLAGS \ (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \ ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) static struct tty_driver *specialix_driver; static struct specialix_board sx_board[SX_NBOARD] = { { 0, SX_IOBASE1, 9, }, { 0, SX_IOBASE2, 11, }, { 0, SX_IOBASE3, 12, }, { 0, SX_IOBASE4, 15, }, }; static struct specialix_port sx_port[SX_NBOARD * SX_NPORT]; static int sx_paranoia_check(struct specialix_port const *port, char *name, const char *routine) { #ifdef SPECIALIX_PARANOIA_CHECK static const char *badmagic = KERN_ERR "sx: Warning: bad specialix port magic number for device %s in %s\n"; static const char *badinfo = KERN_ERR "sx: Warning: null specialix port for device %s in %s\n"; if (!port) { printk(badinfo, name, routine); return 1; } if (port->magic != SPECIALIX_MAGIC) { printk(badmagic, name, routine); return 1; } #endif return 0; } /* * * Service functions for specialix IO8+ driver. * */ /* Get board number from pointer */ static inline int board_No(struct specialix_board *bp) { return bp - sx_board; } /* Get port number from pointer */ static inline int port_No(struct specialix_port const *port) { return SX_PORT(port - sx_port); } /* Get pointer to board from pointer to port */ static inline struct specialix_board *port_Board( struct specialix_port const *port) { return &sx_board[SX_BOARD(port - sx_port)]; } /* Input Byte from CL CD186x register */ static inline unsigned char sx_in(struct specialix_board *bp, unsigned short reg) { bp->reg = reg | 0x80; outb(reg | 0x80, bp->base + SX_ADDR_REG); return inb(bp->base + SX_DATA_REG); } /* Output Byte to CL CD186x register */ static inline void sx_out(struct specialix_board *bp, unsigned short reg, unsigned char val) { bp->reg = reg | 0x80; outb(reg | 0x80, bp->base + SX_ADDR_REG); outb(val, bp->base + SX_DATA_REG); } /* Input Byte from CL CD186x register */ static inline unsigned char sx_in_off(struct specialix_board *bp, unsigned short reg) { bp->reg = reg; outb(reg, bp->base + SX_ADDR_REG); return inb(bp->base + SX_DATA_REG); } /* Output Byte to CL CD186x register */ static inline void sx_out_off(struct specialix_board *bp, unsigned short reg, unsigned char val) { bp->reg = reg; outb(reg, bp->base + SX_ADDR_REG); outb(val, bp->base + SX_DATA_REG); } /* Wait for Channel Command Register ready */ static void sx_wait_CCR(struct specialix_board *bp) { unsigned long delay, flags; unsigned char ccr; for (delay = SX_CCR_TIMEOUT; delay; delay--) { spin_lock_irqsave(&bp->lock, flags); ccr = sx_in(bp, CD186x_CCR); spin_unlock_irqrestore(&bp->lock, flags); if (!ccr) return; udelay(1); } printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); } /* Wait for Channel Command Register ready */ static void sx_wait_CCR_off(struct specialix_board *bp) { unsigned long delay; unsigned char crr; unsigned long flags; for (delay = SX_CCR_TIMEOUT; delay; delay--) { spin_lock_irqsave(&bp->lock, flags); crr = sx_in_off(bp, CD186x_CCR); spin_unlock_irqrestore(&bp->lock, flags); if (!crr) return; udelay(1); } printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); } /* * specialix IO8+ IO range functions. */ static int sx_request_io_range(struct specialix_board *bp) { return request_region(bp->base, bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE, "specialix IO8+") == NULL; } static void sx_release_io_range(struct specialix_board *bp) { release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE); } /* Set the IRQ using the RTS lines that run to the PAL on the board.... */ static int sx_set_irq(struct specialix_board *bp) { int virq; int i; unsigned long flags; if (bp->flags & SX_BOARD_IS_PCI) return 1; switch (bp->irq) { /* In the same order as in the docs... */ case 15: virq = 0; break; case 12: virq = 1; break; case 11: virq = 2; break; case 9: virq = 3; break; default:printk(KERN_ERR "Speclialix: cannot set irq to %d.\n", bp->irq); return 0; } spin_lock_irqsave(&bp->lock, flags); for (i = 0; i < 2; i++) { sx_out(bp, CD186x_CAR, i); sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0); } spin_unlock_irqrestore(&bp->lock, flags); return 1; } /* Reset and setup CD186x chip */ static int sx_init_CD186x(struct specialix_board *bp) { unsigned long flags; int scaler; int rv = 1; func_enter(); sx_wait_CCR_off(bp); /* Wait for CCR ready */ spin_lock_irqsave(&bp->lock, flags); sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */ spin_unlock_irqrestore(&bp->lock, flags); msleep(50); /* Delay 0.05 sec */ spin_lock_irqsave(&bp->lock, flags); sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */ sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */ sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT); /* Prio for modem intr */ sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT); /* Prio for transmitter intr */ sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */ /* Set RegAckEn */ sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN); /* Setting up prescaler. We need 4 ticks per 1 ms */ scaler = SX_OSCFREQ/SPECIALIX_TPS; sx_out_off(bp, CD186x_PPRH, scaler >> 8); sx_out_off(bp, CD186x_PPRL, scaler & 0xff); spin_unlock_irqrestore(&bp->lock, flags); if (!sx_set_irq(bp)) { /* Figure out how to pass this along... */ printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq); rv = 0; } func_exit(); return rv; } static int read_cross_byte(struct specialix_board *bp, int reg, int bit) { int i; int t; unsigned long flags; spin_lock_irqsave(&bp->lock, flags); for (i = 0, t = 0; i < 8; i++) { sx_out_off(bp, CD186x_CAR, i); if (sx_in_off(bp, reg) & bit) t |= 1 << i; } spin_unlock_irqrestore(&bp->lock, flags); return t; } /* Main probing routine, also sets irq. */ static int sx_probe(struct specialix_board *bp) { unsigned char val1, val2; int rev; int chip; func_enter(); if (sx_request_io_range(bp)) { func_exit(); return 1; } /* Are the I/O ports here ? */ sx_out_off(bp, CD186x_PPRL, 0x5a); udelay(1); val1 = sx_in_off(bp, CD186x_PPRL); sx_out_off(bp, CD186x_PPRL, 0xa5); udelay(1); val2 = sx_in_off(bp, CD186x_PPRL); if (val1 != 0x5a || val2 != 0xa5) { printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n", board_No(bp), bp->base); sx_release_io_range(bp); func_exit(); return 1; } /* Check the DSR lines that Specialix uses as board identification */ val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR); val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS); dprintk(SX_DEBUG_INIT, "sx%d: DSR lines are: %02x, rts lines are: %02x\n", board_No(bp), val1, val2); /* They managed to switch the bit order between the docs and the IO8+ card. The new PCI card now conforms to old docs. They changed the PCI docs to reflect the situation on the old card. */ val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2; if (val1 != val2) { printk(KERN_INFO "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n", board_No(bp), val2, bp->base, val1); sx_release_io_range(bp); func_exit(); return 1; } /* Reset CD186x again */ if (!sx_init_CD186x(bp)) { sx_release_io_range(bp); func_exit(); return 1; } sx_request_io_range(bp); bp->flags |= SX_BOARD_PRESENT; /* Chip revcode pkgtype GFRCR SRCR bit 7 CD180 rev B 0x81 0 CD180 rev C 0x82 0 CD1864 rev A 0x82 1 CD1865 rev A 0x83 1 -- Do not use!!! Does not work. CD1865 rev B 0x84 1 -- Thanks to Gwen Wang, Cirrus Logic. */ switch (sx_in_off(bp, CD186x_GFRCR)) { case 0x82: chip = 1864; rev = 'A'; break; case 0x83: chip = 1865; rev = 'A'; break; case 0x84: chip = 1865; rev = 'B'; break; case 0x85: chip = 1865; rev = 'C'; break; /* Does not exist at this time */ default: chip = -1; rev = 'x'; } dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR)); printk(KERN_INFO "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n", board_No(bp), bp->base, bp->irq, chip, rev); func_exit(); return 0; } /* * * Interrupt processing routines. * */ static struct specialix_port *sx_get_port(struct specialix_board *bp, unsigned char const *what) { unsigned char channel; struct specialix_port *port = NULL; channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF; dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel); if (channel < CD186x_NCH) { port = &sx_port[board_No(bp) * SX_NPORT + channel]; dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n", board_No(bp) * SX_NPORT + channel, port, port->port.flags & ASYNC_INITIALIZED); if (port->port.flags & ASYNC_INITIALIZED) { dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port); func_exit(); return port; } } printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n", board_No(bp), what, channel); return NULL; } static void sx_receive_exc(struct specialix_board *bp) { struct specialix_port *port; struct tty_struct *tty; unsigned char status; unsigned char ch, flag; func_enter(); port = sx_get_port(bp, "Receive"); if (!port) { dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); func_exit(); return; } tty = port->port.tty; status = sx_in(bp, CD186x_RCSR); dprintk(SX_DEBUG_RX, "status: 0x%x\n", status); if (status & RCSR_OE) { port->overrun++; dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Overrun. Total %ld overruns.\n", board_No(bp), port_No(port), port->overrun); } status &= port->mark_mask; /* This flip buffer check needs to be below the reading of the status register to reset the chip's IRQ.... */ if (tty_buffer_request_room(tty, 1) == 0) { dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Working around flip buffer overflow.\n", board_No(bp), port_No(port)); func_exit(); return; } ch = sx_in(bp, CD186x_RDR); if (!status) { func_exit(); return; } if (status & RCSR_TOUT) { printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n", board_No(bp), port_No(port)); func_exit(); return; } else if (status & RCSR_BREAK) { dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n", board_No(bp), port_No(port)); flag = TTY_BREAK; if (port->port.flags & ASYNC_SAK) do_SAK(tty); } else if (status & RCSR_PE) flag = TTY_PARITY; else if (status & RCSR_FE) flag = TTY_FRAME; else if (status & RCSR_OE) flag = TTY_OVERRUN; else flag = TTY_NORMAL; if (tty_insert_flip_char(tty, ch, flag)) tty_flip_buffer_push(tty); func_exit(); } static void sx_receive(struct specialix_board *bp) { struct specialix_port *port; struct tty_struct *tty; unsigned char count; func_enter(); port = sx_get_port(bp, "Receive"); if (port == NULL) { dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n"); func_exit(); return; } tty = port->port.tty; count = sx_in(bp, CD186x_RDCR); dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count); port->hits[count > 8 ? 9 : count]++; while (count--) tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL); tty_flip_buffer_push(tty); func_exit(); } static void sx_transmit(struct specialix_board *bp) { struct specialix_port *port; struct tty_struct *tty; unsigned char count; func_enter(); port = sx_get_port(bp, "Transmit"); if (port == NULL) { func_exit(); return; } dprintk(SX_DEBUG_TX, "port: %p\n", port); tty = port->port.tty; if (port->IER & IER_TXEMPTY) { /* FIFO drained */ sx_out(bp, CD186x_CAR, port_No(port)); port->IER &= ~IER_TXEMPTY; sx_out(bp, CD186x_IER, port->IER); func_exit(); return; } if ((port->xmit_cnt <= 0 && !port->break_length) || tty->stopped || tty->hw_stopped) { sx_out(bp, CD186x_CAR, port_No(port)); port->IER &= ~IER_TXRDY; sx_out(bp, CD186x_IER, port->IER); func_exit(); return; } if (port->break_length) { if (port->break_length > 0) { if (port->COR2 & COR2_ETC) { sx_out(bp, CD186x_TDR, CD186x_C_ESC); sx_out(bp, CD186x_TDR, CD186x_C_SBRK); port->COR2 &= ~COR2_ETC; } count = min_t(int, port->break_length, 0xff); sx_out(bp, CD186x_TDR, CD186x_C_ESC); sx_out(bp, CD186x_TDR, CD186x_C_DELAY); sx_out(bp, CD186x_TDR, count); port->break_length -= count; if (port->break_length == 0) port->break_length--; } else { sx_out(bp, CD186x_TDR, CD186x_C_ESC); sx_out(bp, CD186x_TDR, CD186x_C_EBRK); sx_out(bp, CD186x_COR2, port->COR2); sx_wait_CCR(bp); sx_out(bp, CD186x_CCR, CCR_CORCHG2); port->break_length = 0; } func_exit(); return; } count = CD186x_NFIFO; do { sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]); port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); if (--port->xmit_cnt <= 0) break; } while (--count > 0); if (port->xmit_cnt <= 0) { sx_out(bp, CD186x_CAR, port_No(port)); port->IER &= ~IER_TXRDY; sx_out(bp, CD186x_IER, port->IER); } if (port->xmit_cnt <= port->wakeup_chars) tty_wakeup(tty); func_exit(); } static void sx_check_modem(struct specialix_board *bp) { struct specialix_port *port; struct tty_struct *tty; unsigned char mcr; int msvr_cd; dprintk(SX_DEBUG_SIGNALS, "Modem intr. "); port = sx_get_port(bp, "Modem"); if (port == NULL) return; tty = port->port.tty; mcr = sx_in(bp, CD186x_MCR); if ((mcr & MCR_CDCHG)) { dprintk(SX_DEBUG_SIGNALS, "CD just changed... "); msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD; if (msvr_cd) { dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n"); wake_up_interruptible(&port->port.open_wait); } else { dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n"); tty_hangup(tty); } } #ifdef SPECIALIX_BRAIN_DAMAGED_CTS if (mcr & MCR_CTSCHG) { if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) { tty->hw_stopped = 0; port->IER |= IER_TXRDY; if (port->xmit_cnt <= port->wakeup_chars) tty_wakeup(tty); } else { tty->hw_stopped = 1; port->IER &= ~IER_TXRDY; } sx_out(bp, CD186x_IER, port->IER); } if (mcr & MCR_DSSXHG) { if (sx_in(bp, CD186x_MSVR) & MSVR_DSR) { tty->hw_stopped = 0; port->IER |= IER_TXRDY; if (port->xmit_cnt <= port->wakeup_chars) tty_wakeup(tty); } else { tty->hw_stopped = 1; port->IER &= ~IER_TXRDY; } sx_out(bp, CD186x_IER, port->IER); } #endif /* SPECIALIX_BRAIN_DAMAGED_CTS */ /* Clear change bits */ sx_out(bp, CD186x_MCR, 0); } /* The main interrupt processing routine */ static irqreturn_t sx_interrupt(int dummy, void *dev_id) { unsigned char status; unsigned char ack; struct specialix_board *bp = dev_id; unsigned long loop = 0; int saved_reg; unsigned long flags; func_enter(); spin_lock_irqsave(&bp->lock, flags); dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1); if (!(bp->flags & SX_BOARD_ACTIVE)) { dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", bp->irq); spin_unlock_irqrestore(&bp->lock, flags); func_exit(); return IRQ_NONE; } saved_reg = bp->reg; while (++loop < 16) { status = sx_in(bp, CD186x_SRSR) & (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint); if (status == 0) break; if (status & SRSR_RREQint) { ack = sx_in(bp, CD186x_RRAR); if (ack == (SX_ID | GIVR_IT_RCV)) sx_receive(bp); else if (ack == (SX_ID | GIVR_IT_REXC)) sx_receive_exc(bp); else printk(KERN_ERR "sx%d: status: 0x%x Bad receive ack 0x%02x.\n", board_No(bp), status, ack); } else if (status & SRSR_TREQint) { ack = sx_in(bp, CD186x_TRAR); if (ack == (SX_ID | GIVR_IT_TX)) sx_transmit(bp); else printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n", board_No(bp), status, ack, port_No(sx_get_port(bp, "Int"))); } else if (status & SRSR_MREQint) { ack = sx_in(bp, CD186x_MRAR); if (ack == (SX_ID | GIVR_IT_MODEM)) sx_check_modem(bp); else printk(KERN_ERR "sx%d: status: 0x%x Bad modem ack 0x%02x.\n", board_No(bp), status, ack); } sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */ } bp->reg = saved_reg; outb(bp->reg, bp->base + SX_ADDR_REG); spin_unlock_irqrestore(&bp->lock, flags); func_exit(); return IRQ_HANDLED; } /* * Routines for open & close processing. */ static void turn_ints_off(struct specialix_board *bp) { unsigned long flags; func_enter(); spin_lock_irqsave(&bp->lock, flags); (void) sx_in_off(bp, 0); /* Turn off interrupts. */ spin_unlock_irqrestore(&bp->lock, flags); func_exit(); } static void turn_ints_on(struct specialix_board *bp) { unsigned long flags; func_enter(); spin_lock_irqsave(&bp->lock, flags); (void) sx_in(bp, 0); /* Turn ON interrupts. */ spin_unlock_irqrestore(&bp->lock, flags); func_exit(); } /* Called with disabled interrupts */ static int sx_setup_board(struct specialix_board *bp) { int error; if (bp->flags & SX_BOARD_ACTIVE) return 0; if (bp->flags & SX_BOARD_IS_PCI) error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp); else error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED, "specialix IO8+", bp); if (error) return error; turn_ints_on(bp); bp->flags |= SX_BOARD_ACTIVE; return 0; } /* Called with disabled interrupts */ static void sx_shutdown_board(struct specialix_board *bp) { func_enter(); if (!(bp->flags & SX_BOARD_ACTIVE)) { func_exit(); return; } bp->flags &= ~SX_BOARD_ACTIVE; dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n", bp->irq, board_No(bp)); free_irq(bp->irq, bp); turn_ints_off(bp); func_exit(); } static unsigned int sx_crtscts(struct tty_struct *tty) { if (sx_rtscts) return C_CRTSCTS(tty); return 1; } /* * Setting up port characteristics. * Must be called with disabled interrupts */ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *port) { struct tty_struct *tty; unsigned long baud; long tmp; unsigned char cor1 = 0, cor3 = 0; unsigned char mcor1 = 0, mcor2 = 0; static unsigned long again; unsigned long flags; func_enter(); tty = port->port.tty; if (!tty || !tty->termios) { func_exit(); return; } port->IER = 0; port->COR2 = 0; /* Select port on the board */ spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CAR, port_No(port)); /* The Specialix board doens't implement the RTS lines. They are used to set the IRQ level. Don't touch them. */ if (sx_crtscts(tty)) port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS); else port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS); spin_unlock_irqrestore(&bp->lock, flags); dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR); baud = tty_get_baud_rate(tty); if (baud == 38400) { if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) baud = 57600; if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) baud = 115200; } if (!baud) { /* Drop DTR & exit */ dprintk(SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n"); if (!sx_crtscts(tty)) { port->MSVR &= ~MSVR_DTR; spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_MSVR, port->MSVR); spin_unlock_irqrestore(&bp->lock, flags); } else dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n"); return; } else { /* Set DTR on */ if (!sx_crtscts(tty)) port->MSVR |= MSVR_DTR; } /* * Now we must calculate some speed depended things */ /* Set baud rate for port */ tmp = port->custom_divisor ; if (tmp) printk(KERN_INFO "sx%d: Using custom baud rate divisor %ld. \n" "This is an untested option, please be careful.\n", port_No(port), tmp); else tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) / CD186x_TPC); if (tmp < 0x10 && time_before(again, jiffies)) { again = jiffies + HZ * 60; /* Page 48 of version 2.0 of the CL-CD1865 databook */ if (tmp >= 12) { printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" "Performance degradation is possible.\n" "Read specialix.txt for more info.\n", port_No(port), tmp); } else { printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n" "Warning: overstressing Cirrus chip. This might not work.\n" "Read specialix.txt for more info.\n", port_No(port), tmp); } } spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff); sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff); sx_out(bp, CD186x_RBPRL, tmp & 0xff); sx_out(bp, CD186x_TBPRL, tmp & 0xff); spin_unlock_irqrestore(&bp->lock, flags); if (port->custom_divisor) baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor; baud = (baud + 5) / 10; /* Estimated CPS */ /* Two timer ticks seems enough to wakeup something like SLIP driver */ tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO; port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? SERIAL_XMIT_SIZE - 1 : tmp); /* Receiver timeout will be transmission time for 1.5 chars */ tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud; tmp = (tmp > 0xff) ? 0xff : tmp; spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_RTPR, tmp); spin_unlock_irqrestore(&bp->lock, flags); switch (C_CSIZE(tty)) { case CS5: cor1 |= COR1_5BITS; break; case CS6: cor1 |= COR1_6BITS; break; case CS7: cor1 |= COR1_7BITS; break; case CS8: cor1 |= COR1_8BITS; break; } if (C_CSTOPB(tty)) cor1 |= COR1_2SB; cor1 |= COR1_IGNORE; if (C_PARENB(tty)) { cor1 |= COR1_NORMPAR; if (C_PARODD(tty)) cor1 |= COR1_ODDP; if (I_INPCK(tty)) cor1 &= ~COR1_IGNORE; } /* Set marking of some errors */ port->mark_mask = RCSR_OE | RCSR_TOUT; if (I_INPCK(tty)) port->mark_mask |= RCSR_FE | RCSR_PE; if (I_BRKINT(tty) || I_PARMRK(tty)) port->mark_mask |= RCSR_BREAK; if (I_IGNPAR(tty)) port->mark_mask &= ~(RCSR_FE | RCSR_PE); if (I_IGNBRK(tty)) { port->mark_mask &= ~RCSR_BREAK; if (I_IGNPAR(tty)) /* Real raw mode. Ignore all */ port->mark_mask &= ~RCSR_OE; } /* Enable Hardware Flow Control */ if (C_CRTSCTS(tty)) { #ifdef SPECIALIX_BRAIN_DAMAGED_CTS port->IER |= IER_DSR | IER_CTS; mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; spin_lock_irqsave(&bp->lock, flags); tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & (MSVR_CTS|MSVR_DSR)); spin_unlock_irqrestore(&bp->lock, flags); #else port->COR2 |= COR2_CTSAE; #endif } /* Enable Software Flow Control. FIXME: I'm not sure about this */ /* Some people reported that it works, but I still doubt it */ if (I_IXON(tty)) { port->COR2 |= COR2_TXIBE; cor3 |= (COR3_FCT | COR3_SCDE); if (I_IXANY(tty)) port->COR2 |= COR2_IXM; spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_SCHR1, START_CHAR(tty)); sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty)); sx_out(bp, CD186x_SCHR3, START_CHAR(tty)); sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty)); spin_unlock_irqrestore(&bp->lock, flags); } if (!C_CLOCAL(tty)) { /* Enable CD check */ port->IER |= IER_CD; mcor1 |= MCOR1_CDZD; mcor2 |= MCOR2_CDOD; } if (C_CREAD(tty)) /* Enable receiver */ port->IER |= IER_RXD; /* Set input FIFO size (1-8 bytes) */ cor3 |= sx_rxfifo; /* Setting up CD186x channel registers */ spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_COR1, cor1); sx_out(bp, CD186x_COR2, port->COR2); sx_out(bp, CD186x_COR3, cor3); spin_unlock_irqrestore(&bp->lock, flags); /* Make CD186x know about registers change */ sx_wait_CCR(bp); spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); /* Setting up modem option registers */ dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", mcor1, mcor2); sx_out(bp, CD186x_MCOR1, mcor1); sx_out(bp, CD186x_MCOR2, mcor2); spin_unlock_irqrestore(&bp->lock, flags); /* Enable CD186x transmitter & receiver */ sx_wait_CCR(bp); spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN); /* Enable interrupts */ sx_out(bp, CD186x_IER, port->IER); /* And finally set the modem lines... */ sx_out(bp, CD186x_MSVR, port->MSVR); spin_unlock_irqrestore(&bp->lock, flags); func_exit(); } /* Must be called with interrupts enabled */ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port) { unsigned long flags; func_enter(); if (port->port.flags & ASYNC_INITIALIZED) { func_exit(); return 0; } if (!port->xmit_buf) { /* We may sleep in get_zeroed_page() */ unsigned long tmp; tmp = get_zeroed_page(GFP_KERNEL); if (tmp == 0L) { func_exit(); return -ENOMEM; } if (port->xmit_buf) { free_page(tmp); func_exit(); return -ERESTARTSYS; } port->xmit_buf = (unsigned char *) tmp; } spin_lock_irqsave(&port->lock, flags); if (port->port.tty) clear_bit(TTY_IO_ERROR, &port->port.tty->flags); port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; sx_change_speed(bp, port); port->port.flags |= ASYNC_INITIALIZED; spin_unlock_irqrestore(&port->lock, flags); func_exit(); return 0; } /* Must be called with interrupts disabled */ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *port) { struct tty_struct *tty; int i; unsigned long flags; func_enter(); if (!(port->port.flags & ASYNC_INITIALIZED)) { func_exit(); return; } if (sx_debug & SX_DEBUG_FIFO) { dprintk(SX_DEBUG_FIFO, "sx%d: port %d: %ld overruns, FIFO hits [ ", board_No(bp), port_No(port), port->overrun); for (i = 0; i < 10; i++) dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]); dprintk(SX_DEBUG_FIFO, "].\n"); } if (port->xmit_buf) { free_page((unsigned long) port->xmit_buf); port->xmit_buf = NULL; } /* Select port */ spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CAR, port_No(port)); tty = port->port.tty; if (tty == NULL || C_HUPCL(tty)) { /* Drop DTR */ sx_out(bp, CD186x_MSVDTR, 0); } spin_unlock_irqrestore(&bp->lock, flags); /* Reset port */ sx_wait_CCR(bp); spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CCR, CCR_SOFTRESET); /* Disable all interrupts from this port */ port->IER = 0; sx_out(bp, CD186x_IER, port->IER); spin_unlock_irqrestore(&bp->lock, flags); if (tty) set_bit(TTY_IO_ERROR, &tty->flags); port->port.flags &= ~ASYNC_INITIALIZED; if (!bp->count) sx_shutdown_board(bp); func_exit(); } static int block_til_ready(struct tty_struct *tty, struct file *filp, struct specialix_port *port) { DECLARE_WAITQUEUE(wait, current); struct specialix_board *bp = port_Board(port); int retval; int do_clocal = 0; int CD; unsigned long flags; func_enter(); /* * If the device is in the middle of being closed, then block * until it's done, and then try again. */ if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { interruptible_sleep_on(&port->port.close_wait); if (port->port.flags & ASYNC_HUP_NOTIFY) { func_exit(); return -EAGAIN; } else { func_exit(); return -ERESTARTSYS; } } /* * If non-blocking mode is set, or the port is not enabled, * then make the check up front and then exit. */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { port->port.flags |= ASYNC_NORMAL_ACTIVE; func_exit(); return 0; } if (C_CLOCAL(tty)) do_clocal = 1; /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in * this loop, info->count is dropped by one, so that * rs_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; add_wait_queue(&port->port.open_wait, &wait); spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) port->port.count--; spin_unlock_irqrestore(&port->lock, flags); port->port.blocked_open++; while (1) { spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CAR, port_No(port)); CD = sx_in(bp, CD186x_MSVR) & MSVR_CD; if (sx_crtscts(tty)) { /* Activate RTS */ port->MSVR |= MSVR_DTR; /* WTF? */ sx_out(bp, CD186x_MSVR, port->MSVR); } else { /* Activate DTR */ port->MSVR |= MSVR_DTR; sx_out(bp, CD186x_MSVR, port->MSVR); } spin_unlock_irqrestore(&bp->lock, flags); set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) { if (port->port.flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; break; } if (!(port->port.flags & ASYNC_CLOSING) && (do_clocal || CD)) break; if (signal_pending(current)) { retval = -ERESTARTSYS; break; } schedule(); } set_current_state(TASK_RUNNING); remove_wait_queue(&port->port.open_wait, &wait); spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) port->port.count++; port->port.blocked_open--; spin_unlock_irqrestore(&port->lock, flags); if (retval) { func_exit(); return retval; } port->port.flags |= ASYNC_NORMAL_ACTIVE; func_exit(); return 0; } static int sx_open(struct tty_struct *tty, struct file *filp) { int board; int error; struct specialix_port *port; struct specialix_board *bp; int i; unsigned long flags; func_enter(); board = SX_BOARD(tty->index); if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) { func_exit(); return -ENODEV; } bp = &sx_board[board]; port = sx_port + board * SX_NPORT + SX_PORT(tty->index); port->overrun = 0; for (i = 0; i < 10; i++) port->hits[i] = 0; dprintk(SX_DEBUG_OPEN, "Board = %d, bp = %p, port = %p, portno = %d.\n", board, bp, port, SX_PORT(tty->index)); if (sx_paranoia_check(port, tty->name, "sx_open")) { func_enter(); return -ENODEV; } error = sx_setup_board(bp); if (error) { func_exit(); return error; } spin_lock_irqsave(&bp->lock, flags); port->port.count++; bp->count++; tty->driver_data = port; port->port.tty = tty; spin_unlock_irqrestore(&bp->lock, flags); error = sx_setup_port(bp, port); if (error) { func_enter(); return error; } error = block_til_ready(tty, filp, port); if (error) { func_enter(); return error; } func_exit(); return 0; } static void sx_flush_buffer(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) { func_exit(); return; } bp = port_Board(port); spin_lock_irqsave(&port->lock, flags); port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; spin_unlock_irqrestore(&port->lock, flags); tty_wakeup(tty); func_exit(); } static void sx_close(struct tty_struct *tty, struct file *filp) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; unsigned long timeout; func_enter(); if (!port || sx_paranoia_check(port, tty->name, "close")) { func_exit(); return; } spin_lock_irqsave(&port->lock, flags); if (tty_hung_up_p(filp)) { spin_unlock_irqrestore(&port->lock, flags); func_exit(); return; } bp = port_Board(port); if (tty->count == 1 && port->port.count != 1) { printk(KERN_ERR "sx%d: sx_close: bad port count;" " tty->count is 1, port count is %d\n", board_No(bp), port->port.count); port->port.count = 1; } if (port->port.count > 1) { port->port.count--; bp->count--; spin_unlock_irqrestore(&port->lock, flags); func_exit(); return; } port->port.flags |= ASYNC_CLOSING; /* * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; spin_unlock_irqrestore(&port->lock, flags); dprintk(SX_DEBUG_OPEN, "Closing\n"); if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, port->port.closing_wait); /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the * line status register. */ dprintk(SX_DEBUG_OPEN, "Closed\n"); port->IER &= ~IER_RXD; if (port->port.flags & ASYNC_INITIALIZED) { port->IER &= ~IER_TXRDY; port->IER |= IER_TXEMPTY; spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_IER, port->IER); spin_unlock_irqrestore(&bp->lock, flags); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially * important if there is a transmit FIFO! */ timeout = jiffies+HZ; while (port->IER & IER_TXEMPTY) { set_current_state(TASK_INTERRUPTIBLE); msleep_interruptible(jiffies_to_msecs(port->timeout)); if (time_after(jiffies, timeout)) { printk(KERN_INFO "Timeout waiting for close\n"); break; } } } if (--bp->count < 0) { printk(KERN_ERR "sx%d: sx_shutdown_port: bad board count: %d port: %d\n", board_No(bp), bp->count, tty->index); bp->count = 0; } if (--port->port.count < 0) { printk(KERN_ERR "sx%d: sx_close: bad port count for tty%d: %d\n", board_No(bp), port_No(port), port->port.count); port->port.count = 0; } sx_shutdown_port(bp, port); sx_flush_buffer(tty); tty_ldisc_flush(tty); spin_lock_irqsave(&port->lock, flags); tty->closing = 0; port->port.tty = NULL; spin_unlock_irqrestore(&port->lock, flags); if (port->port.blocked_open) { if (port->port.close_delay) msleep_interruptible( jiffies_to_msecs(port->port.close_delay)); wake_up_interruptible(&port->port.open_wait); } port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); wake_up_interruptible(&port->port.close_wait); func_exit(); } static int sx_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; int c, total = 0; unsigned long flags; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_write")) { func_exit(); return 0; } bp = port_Board(port); if (!port->xmit_buf) { func_exit(); return 0; } while (1) { spin_lock_irqsave(&port->lock, flags); c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, SERIAL_XMIT_SIZE - port->xmit_head)); if (c <= 0) { spin_unlock_irqrestore(&port->lock, flags); break; } memcpy(port->xmit_buf + port->xmit_head, buf, c); port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); port->xmit_cnt += c; spin_unlock_irqrestore(&port->lock, flags); buf += c; count -= c; total += c; } spin_lock_irqsave(&bp->lock, flags); if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && !(port->IER & IER_TXRDY)) { port->IER |= IER_TXRDY; sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_IER, port->IER); } spin_unlock_irqrestore(&bp->lock, flags); func_exit(); return total; } static int sx_put_char(struct tty_struct *tty, unsigned char ch) { struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_put_char")) { func_exit(); return 0; } dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf); if (!port->xmit_buf) { func_exit(); return 0; } bp = port_Board(port); spin_lock_irqsave(&port->lock, flags); dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", port->xmit_cnt, port->xmit_buf); if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) { spin_unlock_irqrestore(&port->lock, flags); dprintk(SX_DEBUG_TX, "Exit size\n"); func_exit(); return 0; } dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf); port->xmit_buf[port->xmit_head++] = ch; port->xmit_head &= SERIAL_XMIT_SIZE - 1; port->xmit_cnt++; spin_unlock_irqrestore(&port->lock, flags); func_exit(); return 1; } static void sx_flush_chars(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp = port_Board(port); func_enter(); if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) { func_exit(); return; } if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || !port->xmit_buf) { func_exit(); return; } spin_lock_irqsave(&bp->lock, flags); port->IER |= IER_TXRDY; sx_out(port_Board(port), CD186x_CAR, port_No(port)); sx_out(port_Board(port), CD186x_IER, port->IER); spin_unlock_irqrestore(&bp->lock, flags); func_exit(); } static int sx_write_room(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; int ret; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_write_room")) { func_exit(); return 0; } ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; if (ret < 0) ret = 0; func_exit(); return ret; } static int sx_chars_in_buffer(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) { func_exit(); return 0; } func_exit(); return port->xmit_cnt; } static int sx_tiocmget(struct tty_struct *tty, struct file *file) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned char status; unsigned int result; unsigned long flags; func_enter(); if (sx_paranoia_check(port, tty->name, __func__)) { func_exit(); return -ENODEV; } bp = port_Board(port); spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CAR, port_No(port)); status = sx_in(bp, CD186x_MSVR); spin_unlock_irqrestore(&bp->lock, flags); dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n", port_No(port), status, sx_in(bp, CD186x_CAR)); dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port); if (sx_crtscts(port->port.tty)) { result = TIOCM_DTR | TIOCM_DSR | ((status & MSVR_DTR) ? TIOCM_RTS : 0) | ((status & MSVR_CD) ? TIOCM_CAR : 0) | ((status & MSVR_CTS) ? TIOCM_CTS : 0); } else { result = TIOCM_RTS | TIOCM_DSR | ((status & MSVR_DTR) ? TIOCM_DTR : 0) | ((status & MSVR_CD) ? TIOCM_CAR : 0) | ((status & MSVR_CTS) ? TIOCM_CTS : 0); } func_exit(); return result; } static int sx_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; func_enter(); if (sx_paranoia_check(port, tty->name, __func__)) { func_exit(); return -ENODEV; } bp = port_Board(port); spin_lock_irqsave(&port->lock, flags); if (sx_crtscts(port->port.tty)) { if (set & TIOCM_RTS) port->MSVR |= MSVR_DTR; } else { if (set & TIOCM_DTR) port->MSVR |= MSVR_DTR; } if (sx_crtscts(port->port.tty)) { if (clear & TIOCM_RTS) port->MSVR &= ~MSVR_DTR; } else { if (clear & TIOCM_DTR) port->MSVR &= ~MSVR_DTR; } spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_MSVR, port->MSVR); spin_unlock(&bp->lock); spin_unlock_irqrestore(&port->lock, flags); func_exit(); return 0; } static int sx_send_break(struct tty_struct *tty, int length) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp = port_Board(port); unsigned long flags; func_enter(); if (length == 0 || length == -1) return -EOPNOTSUPP; spin_lock_irqsave(&port->lock, flags); port->break_length = SPECIALIX_TPS / HZ * length; port->COR2 |= COR2_ETC; port->IER |= IER_TXRDY; spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_COR2, port->COR2); sx_out(bp, CD186x_IER, port->IER); spin_unlock(&bp->lock); spin_unlock_irqrestore(&port->lock, flags); sx_wait_CCR(bp); spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CCR, CCR_CORCHG2); spin_unlock_irqrestore(&bp->lock, flags); sx_wait_CCR(bp); func_exit(); return 0; } static int sx_set_serial_info(struct specialix_port *port, struct serial_struct __user *newinfo) { struct serial_struct tmp; struct specialix_board *bp = port_Board(port); int change_speed; func_enter(); if (copy_from_user(&tmp, newinfo, sizeof(tmp))) { func_enter(); return -EFAULT; } lock_kernel(); change_speed = ((port->port.flags & ASYNC_SPD_MASK) != (tmp.flags & ASYNC_SPD_MASK)); change_speed |= (tmp.custom_divisor != port->custom_divisor); if (!capable(CAP_SYS_ADMIN)) { if ((tmp.close_delay != port->port.close_delay) || (tmp.closing_wait != port->port.closing_wait) || ((tmp.flags & ~ASYNC_USR_MASK) != (port->port.flags & ~ASYNC_USR_MASK))) { func_exit(); unlock_kernel(); return -EPERM; } port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | (tmp.flags & ASYNC_USR_MASK)); port->custom_divisor = tmp.custom_divisor; } else { port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | (tmp.flags & ASYNC_FLAGS)); port->port.close_delay = tmp.close_delay; port->port.closing_wait = tmp.closing_wait; port->custom_divisor = tmp.custom_divisor; } if (change_speed) sx_change_speed(bp, port); func_exit(); unlock_kernel(); return 0; } static int sx_get_serial_info(struct specialix_port *port, struct serial_struct __user *retinfo) { struct serial_struct tmp; struct specialix_board *bp = port_Board(port); func_enter(); memset(&tmp, 0, sizeof(tmp)); lock_kernel(); tmp.type = PORT_CIRRUS; tmp.line = port - sx_port; tmp.port = bp->base; tmp.irq = bp->irq; tmp.flags = port->port.flags; tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC; tmp.close_delay = port->port.close_delay * HZ/100; tmp.closing_wait = port->port.closing_wait * HZ/100; tmp.custom_divisor = port->custom_divisor; tmp.xmit_fifo_size = CD186x_NFIFO; unlock_kernel(); if (copy_to_user(retinfo, &tmp, sizeof(tmp))) { func_exit(); return -EFAULT; } func_exit(); return 0; } static int sx_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) { struct specialix_port *port = tty->driver_data; void __user *argp = (void __user *)arg; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_ioctl")) { func_exit(); return -ENODEV; } switch (cmd) { case TIOCGSERIAL: func_exit(); return sx_get_serial_info(port, argp); case TIOCSSERIAL: func_exit(); return sx_set_serial_info(port, argp); default: func_exit(); return -ENOIOCTLCMD; } func_exit(); return 0; } static void sx_throttle(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_throttle")) { func_exit(); return; } bp = port_Board(port); /* Use DTR instead of RTS ! */ if (sx_crtscts(tty)) port->MSVR &= ~MSVR_DTR; else { /* Auch!!! I think the system shouldn't call this then. */ /* Or maybe we're supposed (allowed?) to do our side of hw handshake anyway, even when hardware handshake is off. When you see this in your logs, please report.... */ printk(KERN_ERR "sx%d: Need to throttle, but can't (hardware hs is off)\n", port_No(port)); } spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CAR, port_No(port)); spin_unlock_irqrestore(&bp->lock, flags); if (I_IXOFF(tty)) { sx_wait_CCR(bp); spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CCR, CCR_SSCH2); spin_unlock_irqrestore(&bp->lock, flags); sx_wait_CCR(bp); } spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_MSVR, port->MSVR); spin_unlock_irqrestore(&bp->lock, flags); func_exit(); } static void sx_unthrottle(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) { func_exit(); return; } bp = port_Board(port); spin_lock_irqsave(&port->lock, flags); /* XXXX Use DTR INSTEAD???? */ if (sx_crtscts(tty)) port->MSVR |= MSVR_DTR; /* Else clause: see remark in "sx_throttle"... */ spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); spin_unlock(&bp->lock); if (I_IXOFF(tty)) { spin_unlock_irqrestore(&port->lock, flags); sx_wait_CCR(bp); spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CCR, CCR_SSCH1); spin_unlock_irqrestore(&bp->lock, flags); sx_wait_CCR(bp); spin_lock_irqsave(&port->lock, flags); } spin_lock(&bp->lock); sx_out(bp, CD186x_MSVR, port->MSVR); spin_unlock(&bp->lock); spin_unlock_irqrestore(&port->lock, flags); func_exit(); } static void sx_stop(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_stop")) { func_exit(); return; } bp = port_Board(port); spin_lock_irqsave(&port->lock, flags); port->IER &= ~IER_TXRDY; spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_IER, port->IER); spin_unlock(&bp->lock); spin_unlock_irqrestore(&port->lock, flags); func_exit(); } static void sx_start(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_start")) { func_exit(); return; } bp = port_Board(port); spin_lock_irqsave(&port->lock, flags); if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { port->IER |= IER_TXRDY; spin_lock(&bp->lock); sx_out(bp, CD186x_CAR, port_No(port)); sx_out(bp, CD186x_IER, port->IER); spin_unlock(&bp->lock); } spin_unlock_irqrestore(&port->lock, flags); func_exit(); } static void sx_hangup(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; func_enter(); if (sx_paranoia_check(port, tty->name, "sx_hangup")) { func_exit(); return; } bp = port_Board(port); sx_shutdown_port(bp, port); spin_lock_irqsave(&port->lock, flags); bp->count -= port->port.count; if (bp->count < 0) { printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n", board_No(bp), bp->count, tty->index); bp->count = 0; } port->port.count = 0; port->port.flags &= ~ASYNC_NORMAL_ACTIVE; port->port.tty = NULL; spin_unlock_irqrestore(&port->lock, flags); wake_up_interruptible(&port->port.open_wait); func_exit(); } static void sx_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; if (sx_paranoia_check(port, tty->name, "sx_set_termios")) return; bp = port_Board(port); spin_lock_irqsave(&port->lock, flags); sx_change_speed(port_Board(port), port); spin_unlock_irqrestore(&port->lock, flags); if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { tty->hw_stopped = 0; sx_start(tty); } } static const struct tty_operations sx_ops = { .open = sx_open, .close = sx_close, .write = sx_write, .put_char = sx_put_char, .flush_chars = sx_flush_chars, .write_room = sx_write_room, .chars_in_buffer = sx_chars_in_buffer, .flush_buffer = sx_flush_buffer, .ioctl = sx_ioctl, .throttle = sx_throttle, .unthrottle = sx_unthrottle, .set_termios = sx_set_termios, .stop = sx_stop, .start = sx_start, .hangup = sx_hangup, .tiocmget = sx_tiocmget, .tiocmset = sx_tiocmset, .break_ctl = sx_send_break, }; static int sx_init_drivers(void) { int error; int i; func_enter(); specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT); if (!specialix_driver) { printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n"); func_exit(); return 1; } specialix_driver->owner = THIS_MODULE; specialix_driver->name = "ttyW"; specialix_driver->major = SPECIALIX_NORMAL_MAJOR; specialix_driver->type = TTY_DRIVER_TYPE_SERIAL; specialix_driver->subtype = SERIAL_TYPE_NORMAL; specialix_driver->init_termios = tty_std_termios; specialix_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; specialix_driver->init_termios.c_ispeed = 9600; specialix_driver->init_termios.c_ospeed = 9600; specialix_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK; tty_set_operations(specialix_driver, &sx_ops); error = tty_register_driver(specialix_driver); if (error) { put_tty_driver(specialix_driver); printk(KERN_ERR "sx: Couldn't register specialix IO8+ driver, error = %d\n", error); func_exit(); return 1; } memset(sx_port, 0, sizeof(sx_port)); for (i = 0; i < SX_NPORT * SX_NBOARD; i++) { sx_port[i].magic = SPECIALIX_MAGIC; tty_port_init(&sx_port[i].port); spin_lock_init(&sx_port[i].lock); } func_exit(); return 0; } static void sx_release_drivers(void) { func_enter(); tty_unregister_driver(specialix_driver); put_tty_driver(specialix_driver); func_exit(); } /* * This routine must be called by kernel at boot time */ static int __init specialix_init(void) { int i; int found = 0; func_enter(); printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n"); printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n"); if (sx_rtscts) printk(KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n"); else printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n"); for (i = 0; i < SX_NBOARD; i++) spin_lock_init(&sx_board[i].lock); if (sx_init_drivers()) { func_exit(); return -EIO; } for (i = 0; i < SX_NBOARD; i++) if (sx_board[i].base && !sx_probe(&sx_board[i])) found++; #ifdef CONFIG_PCI { struct pci_dev *pdev = NULL; i = 0; while (i < SX_NBOARD) { if (sx_board[i].flags & SX_BOARD_PRESENT) { i++; continue; } pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8, pdev); if (!pdev) break; if (pci_enable_device(pdev)) continue; sx_board[i].irq = pdev->irq; sx_board[i].base = pci_resource_start(pdev, 2); sx_board[i].flags |= SX_BOARD_IS_PCI; if (!sx_probe(&sx_board[i])) found++; } /* May exit pci_get sequence early with lots of boards */ if (pdev != NULL) pci_dev_put(pdev); } #endif if (!found) { sx_release_drivers(); printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n"); func_exit(); return -EIO; } func_exit(); return 0; } static int iobase[SX_NBOARD] = {0,}; static int irq[SX_NBOARD] = {0,}; module_param_array(iobase, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param(sx_debug, int, 0); module_param(sx_rtscts, int, 0); module_param(sx_rxfifo, int, 0); /* * You can setup up to 4 boards. * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter. * You should specify the IRQs too in that case "irq=....,...". * * More than 4 boards in one computer is not possible, as the card can * only use 4 different interrupts. * */ static int __init specialix_init_module(void) { int i; func_enter(); if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) { for (i = 0; i < SX_NBOARD; i++) { sx_board[i].base = iobase[i]; sx_board[i].irq = irq[i]; sx_board[i].count = 0; } } func_exit(); return specialix_init(); } static void __exit specialix_exit_module(void) { int i; func_enter(); sx_release_drivers(); for (i = 0; i < SX_NBOARD; i++) if (sx_board[i].flags & SX_BOARD_PRESENT) sx_release_io_range(&sx_board[i]); func_exit(); } static struct pci_device_id specialx_pci_tbl[] __devinitdata = { { PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) }, { } }; MODULE_DEVICE_TABLE(pci, specialx_pci_tbl); module_init(specialix_init_module); module_exit(specialix_exit_module); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(SPECIALIX_NORMAL_MAJOR);