provisorium: everything i did so far on a10 because im too lazy to seperate everytihng for now

Signed-off-by: Leandro Friedrich <email@leandrofriedrich.de>

Documentation/admin-guide/kernel-parameters.txt

@@ -1289,12 +1289,9 @@
 			specified address. The serial port must already be
 			setup and configured. Options are not yet supported.
 
-		efifb,[options]
+		efifb
 			Start an early, unaccelerated console on the EFI
-			memory mapped framebuffer (if available). On cache
+			memory mapped framebuffer (if available).
-			coherent non-x86 systems that use system memory for
-			the framebuffer, pass the 'ram' option so that it is
-			mapped with the correct attributes.
 
 		linflex,<addr>
 			Use early console provided by Freescale LINFlexD UART
@@ -1302,6 +1299,11 @@
 			address must be provided, and the serial port must
 			already be setup and configured.
 
+		simplefb,<addr>,<width>,<height>,<bpp>
+			Use early console with simple framebuffer that is
+			pre-initialized by firmware. A valid base address,
+			width, height and pixel size must be provided.
+
 	earlyprintk=	[X86,SH,ARM,M68k,S390]
 			earlyprintk=vga
 			earlyprintk=sclp

MAINTAINERS

@@ -7285,6 +7285,11 @@ Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
 F:	drivers/media/tuners/e4000*
 
+EARLY CONSOLE FRAMEBUFFER DRIVER
+M:	Markuss Broks <markuss.broks@gmail.com>
+S:	Maintained
+F:	drivers/video/fbdev/earlycon.c
+
 EARTH_PT1 MEDIA DRIVER
 M:	Akihiro Tsukada <tskd08@gmail.com>
 L:	linux-media@vger.kernel.org

arch/arm64/boot/dts/exynos/Makefile

@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos5433-tm2.dtb		\
 	exynos5433-tm2e.dtb		\
 	exynos7-espresso.dtb		\
+	exynos7885-a10.dtb	\
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
 	exynosautov9-sadk.dtb

arch/arm64/boot/dts/exynos/exynos7885-a10.dts

@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, Leandro Friedrich <email@leandrofriedrich.de>
+ */
+
+/dts-v1/;
+#include "exynos7885.dtsi"
+
+/ {
+	model = "Samsung Galaxy A10";
+	compatible = "samsung,a10", "samsung,exynos7885";
+	
+	#address-cells = <2>;
+	#size-cells = <2>;
+	
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+        stdout-path = "/chosen/framebuffer@0xec000000";
+		framebuffer@0xec000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xec000000 0x0 (720*1520*4)>;
+			width = <720>;
+			height = <1520>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+	
+    memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3da00000>,
+		      <0x0 0xc0000000 0x40000000>,
+		      <0x8 0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		framebuffer@0xec000000 {
+			reg = <0x0 0xec000000 0x0 (720*1520*4)>;
+			no-map;
+		};
+	};
+};

drivers/firmware/efi/Kconfig

@@ -268,10 +268,8 @@ config EFI_DISABLE_PCI_DMA
 	  may be used to override this option.
 
 config EFI_EARLYCON
-	def_bool y
+	bool "EFI early console support"
-	depends on SERIAL_EARLYCON && !ARM && !IA64
+	depends on FB_EARLYCON && !IA64
-	select FONT_SUPPORT
-	select ARCH_USE_MEMREMAP_PROT
 
 config EFI_CUSTOM_SSDT_OVERLAYS
 	bool "Load custom ACPI SSDT overlay from an EFI variable"

drivers/firmware/efi/Makefile

@@ -43,6 +43,5 @@ obj-$(CONFIG_ARM64)			+= $(arm-obj-y)
 riscv-obj-$(CONFIG_EFI)			:= efi-init.o riscv-runtime.o
 obj-$(CONFIG_RISCV)			+= $(riscv-obj-y)
 obj-$(CONFIG_EFI_CAPSULE_LOADER)	+= capsule-loader.o
-obj-$(CONFIG_EFI_EARLYCON)		+= earlycon.o
 obj-$(CONFIG_UEFI_CPER_ARM)		+= cper-arm.o
 obj-$(CONFIG_UEFI_CPER_X86)		+= cper-x86.o

drivers/firmware/efi/earlycon.c

@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2013 Intel Corporation; author Matt Fleming
- */
-
-#include <linux/console.h>
-#include <linux/efi.h>
-#include <linux/font.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/serial_core.h>
-#include <linux/screen_info.h>
-
-#include <asm/early_ioremap.h>
-
-static const struct console *earlycon_console __initdata;
-static const struct font_desc *font;
-static u32 efi_x, efi_y;
-static u64 fb_base;
-static bool fb_wb;
-static void *efi_fb;
-
-/*
- * EFI earlycon needs to use early_memremap() to map the framebuffer.
- * But early_memremap() is not usable for 'earlycon=efifb keep_bootcon',
- * memremap() should be used instead. memremap() will be available after
- * paging_init() which is earlier than initcall callbacks. Thus adding this
- * early initcall function early_efi_map_fb() to map the whole EFI framebuffer.
- */
-static int __init efi_earlycon_remap_fb(void)
-{
-	/* bail if there is no bootconsole or it has been disabled already */
-	if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED))
-		return 0;
-
-	efi_fb = memremap(fb_base, screen_info.lfb_size,
-			  fb_wb ? MEMREMAP_WB : MEMREMAP_WC);
-
-	return efi_fb ? 0 : -ENOMEM;
-}
-early_initcall(efi_earlycon_remap_fb);
-
-static int __init efi_earlycon_unmap_fb(void)
-{
-	/* unmap the bootconsole fb unless keep_bootcon has left it enabled */
-	if (efi_fb && !(earlycon_console->flags & CON_ENABLED))
-		memunmap(efi_fb);
-	return 0;
-}
-late_initcall(efi_earlycon_unmap_fb);
-
-static __ref void *efi_earlycon_map(unsigned long start, unsigned long len)
-{
-	pgprot_t fb_prot;
-
-	if (efi_fb)
-		return efi_fb + start;
-
-	fb_prot = fb_wb ? PAGE_KERNEL : pgprot_writecombine(PAGE_KERNEL);
-	return early_memremap_prot(fb_base + start, len, pgprot_val(fb_prot));
-}
-
-static __ref void efi_earlycon_unmap(void *addr, unsigned long len)
-{
-	if (efi_fb)
-		return;
-
-	early_memunmap(addr, len);
-}
-
-static void efi_earlycon_clear_scanline(unsigned int y)
-{
-	unsigned long *dst;
-	u16 len;
-
-	len = screen_info.lfb_linelength;
-	dst = efi_earlycon_map(y*len, len);
-	if (!dst)
-		return;
-
-	memset(dst, 0, len);
-	efi_earlycon_unmap(dst, len);
-}
-
-static void efi_earlycon_scroll_up(void)
-{
-	unsigned long *dst, *src;
-	u16 len;
-	u32 i, height;
-
-	len = screen_info.lfb_linelength;
-	height = screen_info.lfb_height;
-
-	for (i = 0; i < height - font->height; i++) {
-		dst = efi_earlycon_map(i*len, len);
-		if (!dst)
-			return;
-
-		src = efi_earlycon_map((i + font->height) * len, len);
-		if (!src) {
-			efi_earlycon_unmap(dst, len);
-			return;
-		}
-
-		memmove(dst, src, len);
-
-		efi_earlycon_unmap(src, len);
-		efi_earlycon_unmap(dst, len);
-	}
-}
-
-static void efi_earlycon_write_char(u32 *dst, unsigned char c, unsigned int h)
-{
-	const u32 color_black = 0x00000000;
-	const u32 color_white = 0x00ffffff;
-	const u8 *src;
-	int m, n, bytes;
-	u8 x;
-
-	bytes = BITS_TO_BYTES(font->width);
-	src = font->data + c * font->height * bytes + h * bytes;
-
-	for (m = 0; m < font->width; m++) {
-		n = m % 8;
-		x = *(src + m / 8);
-		if ((x >> (7 - n)) & 1)
-			*dst = color_white;
-		else
-			*dst = color_black;
-		dst++;
-	}
-}
-
-static void
-efi_earlycon_write(struct console *con, const char *str, unsigned int num)
-{
-	struct screen_info *si;
-	unsigned int len;
-	const char *s;
-	void *dst;
-
-	si = &screen_info;
-	len = si->lfb_linelength;
-
-	while (num) {
-		unsigned int linemax;
-		unsigned int h, count = 0;
-
-		for (s = str; *s && *s != '\n'; s++) {
-			if (count == num)
-				break;
-			count++;
-		}
-
-		linemax = (si->lfb_width - efi_x) / font->width;
-		if (count > linemax)
-			count = linemax;
-
-		for (h = 0; h < font->height; h++) {
-			unsigned int n, x;
-
-			dst = efi_earlycon_map((efi_y + h) * len, len);
-			if (!dst)
-				return;
-
-			s = str;
-			n = count;
-			x = efi_x;
-
-			while (n-- > 0) {
-				efi_earlycon_write_char(dst + x*4, *s, h);
-				x += font->width;
-				s++;
-			}
-
-			efi_earlycon_unmap(dst, len);
-		}
-
-		num -= count;
-		efi_x += count * font->width;
-		str += count;
-
-		if (num > 0 && *s == '\n') {
-			efi_x = 0;
-			efi_y += font->height;
-			str++;
-			num--;
-		}
-
-		if (efi_x + font->width > si->lfb_width) {
-			efi_x = 0;
-			efi_y += font->height;
-		}
-
-		if (efi_y + font->height > si->lfb_height) {
-			u32 i;
-
-			efi_y -= font->height;
-			efi_earlycon_scroll_up();
-
-			for (i = 0; i < font->height; i++)
-				efi_earlycon_clear_scanline(efi_y + i);
-		}
-	}
-}
-
-static int __init efi_earlycon_setup(struct earlycon_device *device,
-				     const char *opt)
-{
-	struct screen_info *si;
-	u16 xres, yres;
-	u32 i;
-
-	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
-		return -ENODEV;
-
-	fb_base = screen_info.lfb_base;
-	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
-		fb_base |= (u64)screen_info.ext_lfb_base << 32;
-
-	fb_wb = opt && !strcmp(opt, "ram");
-
-	si = &screen_info;
-	xres = si->lfb_width;
-	yres = si->lfb_height;
-
-	/*
-	 * efi_earlycon_write_char() implicitly assumes a framebuffer with
-	 * 32 bits per pixel.
-	 */
-	if (si->lfb_depth != 32)
-		return -ENODEV;
-
-	font = get_default_font(xres, yres, -1, -1);
-	if (!font)
-		return -ENODEV;
-
-	efi_y = rounddown(yres, font->height) - font->height;
-	for (i = 0; i < (yres - efi_y) / font->height; i++)
-		efi_earlycon_scroll_up();
-
-	device->con->write = efi_earlycon_write;
-	earlycon_console = device->con;
-	return 0;
-}
-EARLYCON_DECLARE(efifb, efi_earlycon_setup);

drivers/tty/serial/earlycon.c

@@ -307,6 +307,9 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
 		strscpy(early_console_dev.options, options,
 			sizeof(early_console_dev.options));
 	}
+
+	early_console_dev.node = node;
+
 	earlycon_init(&early_console_dev, match->name);
 	err = match->setup(&early_console_dev, options);
 	earlycon_print_info(&early_console_dev);

drivers/video/fbdev/Kconfig

@@ -630,6 +630,17 @@ config FB_VESA
 	  You will get a boot time penguin logo at no additional cost. Please
 	  read <file:Documentation/fb/vesafb.rst>. If unsure, say Y.
 
+config FB_EARLYCON
+	bool "Generic framebuffer early console"
+	depends on FB && SERIAL_EARLYCON && !ARM
+	select FONT_SUPPORT
+	select ARCH_USE_MEMREMAP_PROT
+	help
+	  Say Y here if you want early console support for firmware established
+	  linear framebuffer. Unless you are using EFI framebuffer, you need to
+	  specify framebuffer geometry and address in device-tree or in kernel
+	  command line.
+
 config FB_EFI
 	bool "EFI-based Framebuffer Support"
 	depends on (FB = y) && !IA64 && EFI

drivers/video/fbdev/Makefile

@@ -129,6 +129,7 @@ obj-$(CONFIG_FB_MX3)		  += mx3fb.o
 obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
 obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
 obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
+obj-$(CONFIG_FB_EARLYCON)         += earlycon.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o

drivers/video/fbdev/earlycon.c

@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Intel Corporation; author Matt Fleming
+ * Copyright (C) 2022 Markuss Broks <markuss.broks@gmail.com>
+ */
+
+#include <asm/early_ioremap.h>
+#include <linux/console.h>
+#include <linux/efi.h>
+#include <linux/font.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/serial_core.h>
+#include <linux/screen_info.h>
+
+struct fb_earlycon {
+	u32 x, y, curr_x, curr_y, depth, stride;
+	size_t size;
+	phys_addr_t phys_base;
+	void __iomem *virt_base;
+};
+
+static const struct console *earlycon_console __initconst;
+static struct fb_earlycon info;
+static const struct font_desc *font;
+
+static int __init simplefb_earlycon_remap_fb(void)
+{
+	int is_ram;
+	/* bail if there is no bootconsole or it has been disabled already */
+	if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED))
+		return 0;
+
+	is_ram = region_intersects(info.phys_base, info.size,
+				   IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE);
+	is_ram = is_ram == REGION_INTERSECTS;
+
+	info.virt_base = memremap(info.phys_base, info.size,
+				  is_ram ? MEMREMAP_WB : MEMREMAP_WC);
+
+	return info.virt_base ? 0 : -ENOMEM;
+}
+early_initcall(simplefb_earlycon_remap_fb);
+
+static int __init simplefb_earlycon_unmap_fb(void)
+{
+	/* unmap the bootconsole fb unless keep_bootcon has left it enabled */
+	if (info.virt_base && !(earlycon_console->flags & CON_ENABLED))
+		memunmap(info.virt_base);
+	return 0;
+}
+late_initcall(simplefb_earlycon_unmap_fb);
+
+static __ref void *simplefb_earlycon_map(unsigned long start, unsigned long len)
+{
+	pgprot_t fb_prot;
+
+	if (info.virt_base)
+		return info.virt_base + start;
+
+	fb_prot = PAGE_KERNEL;
+	return early_memremap_prot(info.phys_base + start, len, pgprot_val(fb_prot));
+}
+
+static __ref void simplefb_earlycon_unmap(void *addr, unsigned long len)
+{
+	if (info.virt_base)
+		return;
+
+	early_memunmap(addr, len);
+}
+
+static void simplefb_earlycon_clear_scanline(unsigned int y)
+{
+	unsigned long *dst;
+	u16 len;
+
+	len = info.stride;
+	dst = simplefb_earlycon_map(y * len, len);
+	if (!dst)
+		return;
+
+	memset(dst, 0, len);
+	simplefb_earlycon_unmap(dst, len);
+}
+
+static void simplefb_earlycon_scroll_up(void)
+{
+	unsigned long *dst, *src;
+	u16 len;
+	u32 i, height;
+
+	len = info.stride;
+	height = info.y;
+
+	for (i = 0; i < height - font->height; i++) {
+		dst = simplefb_earlycon_map(i * len, len);
+		if (!dst)
+			return;
+
+		src = simplefb_earlycon_map((i + font->height) * len, len);
+		if (!src) {
+			simplefb_earlycon_unmap(dst, len);
+			return;
+		}
+
+		memmove(dst, src, len);
+
+		simplefb_earlycon_unmap(src, len);
+		simplefb_earlycon_unmap(dst, len);
+	}
+}
+
+static void simplefb_earlycon_write_char(u8 *dst, unsigned char c, unsigned int h)
+{
+	const u8 *src;
+	int m, n, bytes;
+	u8 x;
+
+	bytes = BITS_TO_BYTES(font->width);
+	src = font->data + c * font->height * bytes + h * bytes;
+
+	for (m = 0; m < font->width; m++) {
+		n = m % 8;
+		x = *(src + m / 8);
+		if ((x >> (7 - n)) & 1)
+			memset(dst, 0xff, (info.depth / 8));
+		else
+			memset(dst, 0, (info.depth / 8));
+		dst += (info.depth / 8);
+	}
+}
+
+static void
+simplefb_earlycon_write(struct console *con, const char *str, unsigned int num)
+{
+	unsigned int len;
+	const char *s;
+	void *dst;
+
+	len = info.stride;
+
+	while (num) {
+		unsigned int linemax;
+		unsigned int h, count = 0;
+
+		for (s = str; *s && *s != '\n'; s++) {
+			if (count == num)
+				break;
+			count++;
+		}
+
+		linemax = (info.x - info.curr_x) / font->width;
+		if (count > linemax)
+			count = linemax;
+
+		for (h = 0; h < font->height; h++) {
+			unsigned int n, x;
+
+			dst = simplefb_earlycon_map((info.curr_y + h) * len, len);
+			if (!dst)
+				return;
+
+			s = str;
+			n = count;
+			x = info.curr_x;
+
+			while (n-- > 0) {
+				simplefb_earlycon_write_char(dst + (x * 4), *s, h);
+				x += font->width;
+				s++;
+			}
+
+			simplefb_earlycon_unmap(dst, len);
+		}
+
+		num -= count;
+		info.curr_x += count * font->width;
+		str += count;
+
+		if (num > 0 && *s == '\n') {
+			info.curr_x = 0;
+			info.curr_y += font->height;
+			str++;
+			num--;
+		}
+
+		if (info.curr_x + font->width > info.x) {
+			info.curr_x = 0;
+			info.curr_y += font->height;
+		}
+
+		if (info.curr_y + font->height > info.y) {
+			u32 i;
+
+			info.curr_y -= font->height;
+			simplefb_earlycon_scroll_up();
+
+			for (i = 0; i < font->height; i++)
+				simplefb_earlycon_clear_scanline(info.curr_y + i);
+		}
+	}
+}
+
+static int __init simplefb_earlycon_setup_common(struct earlycon_device *device,
+						 const char *opt)
+{
+	int i;
+
+	info.stride = info.x * 4;
+	info.size = info.x * info.y * (info.depth / 8);
+
+	font = get_default_font(info.x, info.y, -1, -1);
+	if (!font)
+		return -ENODEV;
+
+	info.curr_y = rounddown(info.y, font->height) - font->height;
+	for (i = 0; i < (info.y - info.curr_y) / font->height; i++)
+		simplefb_earlycon_scroll_up();
+
+	device->con->write = simplefb_earlycon_write;
+	earlycon_console = device->con;
+	return 0;
+}
+
+static int __init simplefb_earlycon_setup(struct earlycon_device *device,
+					  const char *opt)
+{
+	struct uart_port *port = &device->port;
+	int ret;
+
+	if (!port->mapbase)
+		return -ENODEV;
+
+	info.phys_base = port->mapbase;
+
+	ret = sscanf(device->options, "%u,%u,%u", &info.x, &info.y, &info.depth);
+	if (ret != 3)
+		return -ENODEV;
+
+	return simplefb_earlycon_setup_common(device, opt);
+}
+
+EARLYCON_DECLARE(simplefb, simplefb_earlycon_setup);
+
+#ifdef CONFIG_EFI_EARLYCON
+static int __init simplefb_earlycon_setup_efi(struct earlycon_device *device,
+					      const char *opt)
+{
+	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
+		return -ENODEV;
+
+	info.phys_base = screen_info.lfb_base;
+	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		info.phys_base |= (u64)screen_info.ext_lfb_base << 32;
+
+	info.x = screen_info.lfb_width;
+	info.y = screen_info.lfb_height;
+	info.depth = screen_info.lfb_depth;
+
+	return simplefb_earlycon_setup_common(device, opt);
+}
+
+EARLYCON_DECLARE(efifb, simplefb_earlycon_setup_efi);
+#endif
+
+#ifdef CONFIG_OF_EARLY_FLATTREE
+static int __init simplefb_earlycon_setup_of(struct earlycon_device *device,
+					     const char *opt)
+{
+	struct uart_port *port = &device->port;
+	const __be32 *val;
+
+	if (!port->mapbase)
+		return -ENODEV;
+
+	info.phys_base = port->mapbase;
+
+	val = of_get_flat_dt_prop(device->node, "width", NULL);
+	if (!val)
+		return -ENODEV;
+	info.x = be32_to_cpu(*val);
+
+	val = of_get_flat_dt_prop(device->node, "height", NULL);
+	if (!val)
+		return -ENODEV;
+	info.y = be32_to_cpu(*val);
+
+	val = of_get_flat_dt_prop(device->node, "stride", NULL);
+	if (!val)
+		return -ENODEV;
+	info.depth = (be32_to_cpu(*val) / info.x) * 8;
+
+	return simplefb_earlycon_setup_common(device, opt);
+}
+
+OF_EARLYCON_DECLARE(simplefb, "simple-framebuffer", simplefb_earlycon_setup_of);
+#endif

include/linux/serial_core.h

@@ -703,6 +703,7 @@ struct earlycon_device {
 	struct uart_port port;
 	char options[16];		/* e.g., 115200n8 */
 	unsigned int baud;
+	unsigned long node;
 };
 
 struct earlycon_id {