forked from Minki/linux
fdb0887c5a
10 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Kranthi Kuntala
|
dacb12877d |
thunderbolt: Add support for on-board retimers
USB4 spec specifies standard access to retimers (both on-board and cable) through USB4 port sideband access. This makes it possible to upgrade their firmware in the same way than we already do with the routers. This enumerates on-board retimers under each USB4 port when the link comes up and adds them to the bus under the router the retimer belongs to. Retimers are exposed in sysfs with name like <device>:<port>.<index> where device is the router the retimer belongs to, port is the USB4 port the retimer is connected to and index is the retimer index under that port (starting from 1). This applies to the upstream USB4 port as well so if there is on-board retimer between the port and the router it is also added accordingly. At this time we do not add cable retimers but there is no techincal restriction to do so in the future if needed. It is not clear whether it makes sense to upgrade their firmwares and at least Thunderbolt 3 cables it has not been done outside of lab environments. The sysfs interface is made to follow the router NVM upgrade to make it easy to extend the existing userspace (fwupd) to handle these as well. Signed-off-by: Kranthi Kuntala <kranthi.kuntala@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
||
Mika Westerberg
|
ea81896dc9 |
thunderbolt: Update documentation with the USB4 information
Update user's and administrator's guide to mention USB4, how it relates to Thunderbolt and and how it is supported in Linux. While there add the missing SPDX identifier to the document. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-10-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mika Westerberg
|
dcc3c9e37f |
thunderbolt: Export IOMMU based DMA protection support to userspace
Recent systems with Thunderbolt ports may support IOMMU natively. In practice this means that Thunderbolt connected devices are placed behind an IOMMU during the whole time it is connected (including during boot) making Thunderbolt security levels redundant. This is called Kernel DMA protection [1] by Microsoft. Some of these systems still have Thunderbolt security level set to "user" in order to support OS downgrade (the older version of the OS might not support IOMMU based DMA protection so connecting a device still relies on user approval). Export this information to userspace by introducing a new sysfs attribute (iommu_dma_protection). Based on it userspace tools can make more accurate decision whether or not authorize the connected device. In addition update Thunderbolt documentation regarding IOMMU based DMA protection. [1] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> |
||
Mika Westerberg
|
6fc14e1a44 |
thunderbolt: Introduce USB only (SL4) security level
This new security level works so that it creates one PCIe tunnel to the connected Thunderbolt dock, removing PCIe links downstream of the dock. This leaves only the internal USB controller visible. Display Port tunnels are created normally. While there make sure security sysfs attribute returns "unknown" for any future security level. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> |
||
Randy Dunlap
|
54e36a2dc5 |
Documentation/admin-guide: fixes for thunderbolt.rst
Edits for grammar, punctuation, and a doubled-up word. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Andy Shevchenko
|
cce1fea50e |
thunderbolt: Make pathname to force_power shorter
WMI is the bus inside kernel, so, we may access the GUID via /sys/bus/wmi instead of doing this through /sys/devices path. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Linus Torvalds
|
07c455ee22 |
platform-drivers-x86 for v4.15-1
For this cycle we have quite an update for the Dell SMBIOS driver including WMI work to provide an interface for SMBIOS tokens via sysfs and WMI support for 2017+ Dell laptop models. SMM dispatcher code is split into a separate driver followed by a new WMI dispatcher. The latter provides a character device interface to user space. The pull request contains a merge of immutable branch from Wolfram Sang in order to apply a dependent fix to the Intel CherryTrail Battery Management driver. Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0 support is added for Intel Skylake. Peaq WMI hotkeys driver gets its own maintainer and white list of supported models. Silead DMI is expanded to support few additional platforms. Tablet mode via GMMS ACPI method is added to support some ThinkPad tablets. Two commits appear here which were previously merged during the v4.14-rcX cycle: - |
||
Amir Levy
|
e69b6c02b4 |
net: Add support for networking over Thunderbolt cable
ThunderboltIP is a protocol created by Apple to tunnel IP/ethernet traffic over a Thunderbolt cable. The protocol consists of configuration phase where each side sends ThunderboltIP login packets (the protocol is determined by UUID in the XDomain packet header) over the configuration channel. Once both sides get positive acknowledgment to their login packet, they configure high-speed DMA path accordingly. This DMA path is then used to transmit and receive networking traffic. This patch creates a virtual ethernet interface the host software can use in the same way as any other networking interface. Once the interface is brought up successfully network packets get tunneled over the Thunderbolt cable to the remote host and back. The connection is terminated by sending a ThunderboltIP logout packet over the configuration channel. We do this when the network interface is brought down by user or the driver is unloaded. Signed-off-by: Amir Levy <amir.jer.levy@intel.com> Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Mario Limonciello
|
ce6a90027c |
platform/x86: Add driver to force WMI Thunderbolt controller power status
Current implementations of Intel Thunderbolt controllers will go into a low power mode when not in use. Many machines containing these controllers also have a GPIO wired up that can force the controller awake. This is offered via a ACPI-WMI interface intended to be manipulated by a userspace utility. This mechanism is provided by Intel to OEMs to include in BIOS. It uses an industry wide GUID that is populated in a separate _WDG entry with no binary MOF. This interface allows software such as fwupd to wake up thunderbolt controllers to query the firmware version or flash new firmware. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> [andy fixed merge conflicts and bump kernel version for ABI] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
Mika Westerberg
|
163f151152 |
thunderbolt: Add documentation how Thunderbolt bus can be used
Since there are no such tool yet that handles all the low-level details of connecting devices and upgrading their firmware, add a small document that shows how the Thunderbolt bus can be used directly from command line. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |