Pull ARM SoC fixes from Arnd Bergmann:
"Here are the patches for this week that came as the fallout of the
merge window:
- Two fixes for the NVidia memory controller driver
- multiple defconfig files get patched to turn CONFIG_FB back on
after that is no longer selected by CONFIG_DRM
- ffa and scmpi firmware drivers fixes, mostly addressing compiler
and documentation warnings
- Platform specific fixes for device tree files on ASpeed, Renesas
and NVidia SoC, mostly for recent regressions.
- A workaround for a regression on the USB PHY with devlink when the
usb-nop-xceiv driver is not available until the rootfs is mounted.
- Device tree compiler warnings in Arm Versatile-AB"
* tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
ARM: dts: versatile: Fix up interrupt controller node names
ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
ARM: configs: Update u8500_defconfig
ARM: configs: Update Vexpress defconfig
ARM: configs: Update Versatile defconfig
ARM: configs: Update RealView defconfig
ARM: configs: Update Integrator defconfig
arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/
firmware: arm_scmi: Fix range check for the maximum number of pending messages
firmware: arm_scmi: Avoid padding in sensor message structure
firmware: arm_scmi: Fix kernel doc warnings about return values
firmware: arm_scpi: Fix kernel doc warnings
firmware: arm_scmi: Fix kernel doc warnings
ARM: shmobile: defconfig: Restore graphical consoles
firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
firmware: arm_ffa: Fix the comment style
firmware: arm_ffa: Simplify probe function
firmware: arm_ffa: Ensure drivers provide a probe function
firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
firmware: arm_scmi: Ensure drivers provide a probe function
...
Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:
arch/arm/boot/dts/versatile-ab.dt.yaml:
intc@10140000: $nodename:0: 'intc@10140000' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
arch/arm/boot/dts/versatile-ab.dt.yaml:
intc@10140000: 'clear-mask' does not match any of the regexes
Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@.. Also drop invalid
clear-mask property.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull networking fixes from Jakub Kicinski.
"Including fixes from bpf and netfilter.
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets in
subflow receive buffers longer than necessary, delaying MPTCP-level
ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack:
- do not renew entry stuck in tcp SYN_SENT state
- do not mark RST in the reply direction coming after SYN packet
for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison"
* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
sfc: add logs explaining XDP_TX/REDIRECT is not available
sfc: ensure correct number of XDP queues
sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
net: fddi: fix UAF in fza_probe
net: dsa: sja1105: fix address learning getting disabled on the CPU port
net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
net: Use nlmsg_unicast() instead of netlink_unicast()
octeontx2-pf: Fix uninitialized boolean variable pps
ipv6: allocate enough headroom in ip6_finish_output2()
net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
net: bridge: multicast: fix MRD advertisement router port marking race
net: bridge: multicast: fix PIM hello router port marking race
net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
dsa: fix for_each_child.cocci warnings
virtio_net: check virtqueue_add_sgs() return value
mptcp: properly account bulk freed memory
selftests: mptcp: fix case multiple subflows limited by server
mptcp: avoid processing packet if a subflow reset
mptcp: fix syncookie process if mptcp can not_accept new subflow
...
Pull ARM devicetree updates from Olof Johansson:
"Like always, the DT branch is sizable. There are numerous additions
and fixes to existing platforms, but also a handful of new ones
introduced. Less than some other releases, but there's been
significant work on cleanups, refactorings and device enabling on
existing platforms.
A non-exhaustive list of new material:
- Refactoring of BCM2711 dtsi structure to add support for the
Raspberry Pi 400
- Rockchip: RK3568 SoC and EVB, video codecs for
rk3036/3066/3188/322x
- Qualcomm: SA8155p Automotive platform (SM8150 derivative),
SM8150/8250 enhancements and support for Sony Xperia 1/1II and
5/5II
- TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
definitions
- TI OMAP: Various cleanups
- Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194
- Qualcomm: lots of additions for peripherals across several SoCs,
and new support for Microsoft Surface Duo (SM8150-based), Huawei
Ascend G7.
- i.MX: Numerous additions of features across SoCs and boards.
- Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
NanoPi R1S H5 boards
- MediaTek: More device bindings for mt8167, new Chromebook system
variants for mt8183
- Renesas: RZ/G2L SoC and EVK added
- Amlogic: BananaPi BPI-M5 board added"
* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
arm64: dts: rockchip: add basic dts for RK3568 EVB
arm64: dts: rockchip: add core dtsi for RK3568 SoC
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
arm64: dts: ipq8074: Add QUP6 I2C node
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
arm64: dts: qcom: sm8250-edo: Enable GPI DMA
arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
arm64: dts: qcom: sm8250-edo: Enable PCIe
...
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
Pull ARM development updates from Russell King:
- Make it clear __swp_entry_to_pte() uses PTE_TYPE_FAULT
- Updates for setting vmalloc size via command line to resolve an issue
with the 8MiB hole not properly being accounted for, and clean up the
code.
- ftrace support for module PLTs
- Spelling fixes
- kbuild updates for removing generated files and pattern rules for
generating files
- Clang/llvm updates
- Change the way the kernel is mapped, placing it in vmalloc space
instead.
- Remove arm_pm_restart from arm and aarch64.
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (29 commits)
ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE
ARM: 9097/1: mmu: Declare section start/end correctly
ARM: 9096/1: Remove arm_pm_restart()
ARM: 9095/1: ARM64: Remove arm_pm_restart()
ARM: 9094/1: Register with kernel restart handler
ARM: 9093/1: drivers: firmwapsci: Register with kernel restart handler
ARM: 9092/1: xen: Register with kernel restart handler
ARM: 9091/1: Revert "mm: qsd8x50: Fix incorrect permission faults"
ARM: 9090/1: Map the lowmem and kernel separately
ARM: 9089/1: Define kernel physical section start and end
ARM: 9088/1: Split KERNEL_OFFSET from PAGE_OFFSET
ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1
ARM: 9086/1: syscalls: use pattern rules to generate syscall headers
ARM: 9085/1: remove unneeded abi parameter to syscallnr.sh
ARM: 9084/1: simplify the build rule of mach-types.h
ARM: 9083/1: uncompress: atags_to_fdt: Spelling s/REturn/Return/
ARM: 9082/1: [v2] mark prepare_page_table as __init
ARM: 9079/1: ftrace: Add MODULE_PLTS support
ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()
ARM: 9077/1: PLT: Move struct plt_entries definition to header
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.14-rc1.
Nothing major here just lots of little changes for new hardware and
features. Highlights are:
- more USB 4 support added to the thunderbolt core
- build warning fixes all over the place
- usb-serial driver updates and new device support
- mtu3 driver updates
- gadget driver updates
- dwc3 driver updates
- dwc2 driver updates
- isp1760 host driver updates
- musb driver updates
- lots of other tiny things.
Full details are in the shortlog.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits)
phy: qcom-qusb2: Add configuration for SM4250 and SM6115
dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible
dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250
USB: cdc-acm: blacklist Heimann USB Appset device
usb: xhci-mtk: allow multiple Start-Split in a microframe
usb: ftdi-elan: remove redundant continue statement in a while-loop
usb: class: cdc-wdm: return the correct errno code
xhci: remove redundant continue statement
usb: dwc3: Fix debugfs creation flow
usb: gadget: hid: fix error return code in hid_bind()
usb: gadget: eem: fix echo command packet response issue
usb: gadget: f_hid: fix endianness issue with descriptors
Revert "USB: misc: Add onboard_usb_hub driver"
Revert "of/platform: Add stubs for of_platform_device_create/destroy()"
Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()"
Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
xhci: solve a double free problem while doing s4
xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning
xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk
xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES
...
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.14-rc1.
A bit more than normal, but nothing major, lots of cleanups.
Highlights are:
- lots of tty api cleanups and mxser driver cleanups from Jiri
- build warning fixes
- various serial driver updates
- coding style cleanups
- various tty driver minor fixes and updates
- removal of broken and disable r3964 line discipline (finally!)
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
serial: mvebu-uart: remove unused member nb from struct mvebu_uart
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
dt-bindings: mvebu-uart: fix documentation
serial: mvebu-uart: correctly calculate minimal possible baudrate
serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
serial: mvebu-uart: fix calculation of clock divisor
tty: make linux/tty_flip.h self-contained
serial: Prefer unsigned int to bare use of unsigned
serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
serial: qcom_geni_serial: use DT aliases according to DT bindings
Revert "tty: serial: Add UART driver for Cortina-Access platform"
tty: serial: Add UART driver for Cortina-Access platform
MAINTAINERS: add me back as mxser maintainer
mxser: Documentation, fix typos
mxser: Documentation, make the docs up-to-date
mxser: Documentation, remove traces of callout device
mxser: introduce mxser_16550A_or_MUST helper
mxser: rename flags to old_speed in mxser_set_serial_info
mxser: use port variable in mxser_set_serial_info
mxser: access info->MCR under info->slock
...
make dtbs_check:
ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$'
ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+'
There is no "smsc,irq-active-low" property, as active low is the
default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull clk updates from Stephen Boyd:
"This round has a diffstat dominated by Qualcomm clk drivers. Honestly
though that's just a bunch of data so the diffstat reflects that.
Looking beyond that there's just a bunch of updates all around in
various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
that have a lot of patches in here.
Overall the driver changes look to be mostly enabling more clks and
non-critical fixes that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates
clkdev to be the only implementation of clk_get() and clk_put().
That's a good step in the right direction to migreate eveerything over
to the common clk framework. Now we don't have to worry about clkdev
specific details, they're just part of the clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is
implemented in only one place in the kernel instead of in
drivers/clk/clkdev.c and in architectures that want their own
implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
Clock Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of
round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
audio, parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
clk: zynqmp: Handle divider specific read only flag
clk: zynqmp: Use firmware specific mux clock flags
clk: zynqmp: Use firmware specific divider clock flags
clk: zynqmp: Use firmware specific common clock flags
clk: lmk04832: Use of match table
clk: lmk04832: Depend on SPI
clk: stm32mp1: new compatible for secure RCC support
dt-bindings: clock: stm32mp1 new compatible for secure rcc
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
reset: stm32mp1: remove stm32mp1 reset
clk: hisilicon: Add clock driver for hi3559A SoC
dt-bindings: Document the hi3559a clock bindings
clk: si5341: Add sysfs properties to allow checking/resetting device faults
clk: si5341: Add silabs,iovdd-33 property
clk: si5341: Add silabs,xaxb-ext-clk property
clk: si5341: Allow different output VDD_SEL values
clk: si5341: Update initialization magic
clk: si5341: Check for input clock presence and PLL lock on startup
...
The values were determined experimentally via boot tests, not by
measuring the bus behaviour with a scope. We plan to do scope
measurements to confirm or refine the values and will update the
devicetree if necessary once these have been obtained.
However, with the patch we can write and read data without issue, where
as booting the system without the patch failed at the point of mounting
the rootfs.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210628013605.1257346-1-andrew@aj.id.au
Fixes: 2fc88f9235 ("mmc: sdhci-of-aspeed: Expose clock phase controls")
Fixes: a5c5168478 ("ARM: dts: aspeed: Add Everest BMC machine")
Signed-off-by: Joel Stanley <joel@jms.id.au>
The degree values were reversed out from the magic tap values of 7 (in)
and 15 + inversion (out) initially suggested by Aspeed.
With the patch tacoma survives several gigabytes of reads and writes
using dd while without it locks up randomly during the boot process.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210625061017.1149942-1-andrew@aj.id.au
Fixes: 2fc88f9235 ("mmc: sdhci-of-aspeed: Expose clock phase controls")
Fixes: 961216c135 ("ARM: dts: aspeed: Add Rainier system")
Signed-off-by: Joel Stanley <joel@jms.id.au>
This device-tree was merged with a provisional vuart IRQ-polarity
property that was still under review and ended up taking a somewhat
different form. This patch updates it to match the final form of the
new vuart properties, which additionally allow specifying the SIRQ
number and LPC address.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Fixes: ca03042f0f ("serial: 8250_aspeed_vuart: add aspeed, lpc-io-reg and aspeed, lpc-interrupts DT properties")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210416075113.18047-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Pull media updates from Mauro Carvalho Chehab:
- V4L2 core control API was split into separate files
- New RC maps: tango and tc-90405
- Hantro driver got support for G2/HEVC decoder
- av7710 is moving to staging, together with some legacy APIs
- several cleanups related to compat_ioctl32 code
- Move the MPEG-2 stateless control type out of staging
- Address several issues with RPM get logic on media drivers
- Lots of cleanups, bug fixes and improvements.
* tag 'media/v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: s5p-mfc: Fix display delay control creation
media: mtk-vpu: on suspend, read/write regs only if vpu is running
media: video-mux: Skip dangling endpoints
media: Fix Media Controller API config checks
media: i2c: rdacm20: Re-work ov10635 reset
media: i2c: rdacm20: Check return values
media: i2c: rdacm20: Report camera module name
media: i2c: rdacm20: Enable noise immunity
media: i2c: rdacm20: Embed 'serializer' field
media: i2c: rdacm21: Power up OV10640 before OV490
media: i2c: rdacm21: Fix OV10640 powerup
media: i2c: rdacm21: Add delay after OV490 reset
media: i2c: max9271: Introduce wake_up() function
media: i2c: max9271: Check max9271_write() return
media: i2c: max9286: Rework comments in .bound()
media: i2c: max9286: Define high channel amplitude
media: i2c: max9286: Cache channel amplitude
media: i2c: max9286: Rename reverse_channel_mv
media: i2c: max9286: Adjust parameters indent
media: hantro: add support for Rockchip RK3036
...
Tacoma and Rainier both have a line-names array that is too long:
gpio gpiochip0: gpio-line-names is length 232 but should be at most length 208
This was probably copied from an AST2500 device tree that did have more
GPIOs on the controller.
Fixes: e9b24b55ca ("ARM: dts: aspeed: rainier: Add gpio line names")
Fixes: 2f68e4e7df ("ARM: dts: aspeed: tacoma: Add gpio line names")
Link: https://lore.kernel.org/r/20210624090742.56640-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Nodes for the Hantro-based video codecs on
rk3036, rk3066, rk3188 and rk322x.
* tag 'v5.14-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
Link: https://lore.kernel.org/r/4611716.rnzMqkiUVr@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
A lot of fixes related to the dt-binding yaml conversion,
power-domain additions for rk322x and rk3036 and the missing
mmc aliases move to board files on rk3066/rk3188.
* tag 'v5.14-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add power controller for RK322x
ARM: dts: rockchip: add power controller for RK3036
ARM: dts: rockchip: add labels to the timer nodes on rk3066a
ARM: dts: rockchip: fix supply properties in io-domains nodes
ARM: dts: rockchip: remove #phy-cells from usbphy node rk3066/rk3188
ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
ARM: dts: rockchip: move mmc aliases to board dts on rk3066/rk3188
ARM: dts: rockchip: move and restyle grf nodes rk3066/rk3188
ARM: dts: rockchip: rename vcc_stdby node name for rk3066a-rayeager.dts
ARM: dts: rockchip: Remove more clock-names from PWM nodes
ARM: dts: rockchip: add #power-domain-cells to power domain nodes
ARM: dts: rockchip: Fix power-controller node names for rk3288
ARM: dts: rockchip: Fix power-controller node names for rk3188
ARM: dts: rockchip: Fix power-controller node names for rk3066a
ARM: dts: rockchip: Remove useless interrupt-names on IOMMU node on rk3036
ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x
ARM: dts: rockchip: Fix the timer clocks order
ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
ARM: dts: rockchip: Fix thermal sensor cells o rk322x
Link: https://lore.kernel.org/r/2084346.irdbgypaU6@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
Devicetree binding clean-up for omaps for v5.14
Minor devicetree clean-up for omaps for the binding checks:
- Drop unsupported dmas for omap2/3 i2c
- Drop redundant ehrpwm compatible
- Drop am33xx-ecap compatible no longer needed
- Correct node names for ecap
- Drop unsupported interrupts for ecap
- Drop redundant ti,pcf8575
- Correct usage for ti,pindir-d0-out-d1-in
* tag 'omap-for-v5.14/dt-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
ARM: dts: dra7x-evm: Drop "ti,pcf8575"
ARM: dts: am33xx: Drop interrupt property from ecap nodes
ARM: dts: ti: Fix node name for all ecap dt nodes
ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodes
ARM: dts: ti: drop usage of redundant compatible
ARM: dts: omap2/3: Drop dmas property from I2C node
Link: https://lore.kernel.org/r/pull-1624002812-396117@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix duplicate usb4 regression for dra74 variants
USB4 is only present in DRA74x variants, and I managed to add it for the
other variants too with the recent legacy platform data removal.
* tag 'omap-for-v5.13/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: Fix duplicate USB4 target module node
Link: https://lore.kernel.org/r/pull-1623999845-180025@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: DT: HiSilicon ARM32 DT updates for 5.14
- Correct the HiSilicon copyright
* tag 'hisi-arm32-dt-for-5.14' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: use the correct HiSilicon copyright
Link: https://lore.kernel.org/r/60CBF408.7040302@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds the definition of both an oscillator at 12Mhz required by the
the watchdog and the watchdog device node.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
ARM: tegra: Device tree changes for v5.14-rc1
This contains various improvements (such as microphone detection and
thermal zones) for some older Tegra devices (such as the Nexus 7 or
the Acer A500).
* tag 'tegra-for-5.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: ouya: Enable memory frequency thermal throttling using ACTMON
ARM: tegra: nexus7: Enable memory frequency thermal throttling using ACTMON
ARM: tegra: Add cooling cells to ACTMON device-tree node
ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant
ARM: tegra: nexus7: Remove monitored-battery property
ARM: tegra: nexus7: Improve thermal zones
ARM: tegra: nexus7: Add i2c-thermtrip node
ARM: tegra: paz00: Add CPU thermal zone
ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees
ARM: tegra: Add reg property to Tegra20 EMC table device-tree nodes
ARM: tegra: acer-a500: Bump thermal trips by 10C
ARM: tegra: acer-a500: Specify proper voltage for WiFi SDIO bus
ARM: tegra: acer-a500: Improve microphone detection
Link: https://lore.kernel.org/r/20210611164437.3568059-4-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm DTS updates for v5.14
This adds DMA, NAND controllers, USB controller and PHY, RPM, L2CC,
thermal sensors and defines thermal zones. It them enables these for the
RB3011.
* tag 'qcom-dts-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Enable NAND + USB for RB3011
ARM: dts: qcom: add L2CC and RPM for IPQ8064
ARM: dts: qcom: Add USB port definitions to ipq806x
ARM: dts: qcom: Add tsens details to ipq806x
ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x
Link: https://lore.kernel.org/r/20210614223840.393224-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX device tree changes for 5.14:
- New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA
board, GE B1x5v2 boards.
- A series from Christoph Niedermaier to correct imx6q-dhcom
descriptions, add device aliases and ethernet VIO regulator.
- Correct Ethernet node name for imx51-digi-connectcore-som and
imx53-ard board to comply DT schema.
- A couple of update on imx6dl-yapp4 board, configuring OLED display
segment offset, and using aliases to set custom MMC device indexes.
- A series from Oleksij Rempel and Robin van der Gracht to update
Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1.
- A series from Shengjiu Wang to improve various audio support on NXP
reference boards.
- Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency.
* tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
ARM: dts: imx6: Add GE B1x5v2
ARM: dts: imx6q-dhcom: Add ethernet VIO regulator
ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc
ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node
ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97
ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes
ARM: dts: imx6dl-prtvt7: Enable the VPU
ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards
ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties
ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node.
ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio
ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
ARM: dts: imx53-ard: Correct Ethernet node name
ARM: dts: i.MX51: digi-connectcore-som: Correct Ethernet node name
ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
ARM: dts: imx6qdl-sabresd: Configure the gpio for hp detect
...
Link: https://lore.kernel.org/r/20210613082544.16067-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
We want the usb fixes in here as well, and this resolves some merge
issues with:
drivers/usb/dwc3/debugfs.c
drivers/usb/dwc3/gadget.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the power controller node and the correspondending qos nodes for
RK3036.
Also add the power-domain property to the nodes that are already
present.
Note: Since the regiser offsets of the axi interconnect QoS are missing
in the TRM (RK3036 TRM V1.0), they have been taken from vendor kernel.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210527154455.358869-9-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
AT91 dt for 5.14:
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
* tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: i2c: at91: fix example for scl-gpios
ARM: dts: at91: sama5d4: fix pinctrl muxing
Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Some Ux500 DTS updates for v5.14:
- Fix interrupt cells, GPIO controller node names in accordance
with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
magnetometer.
* tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Fix orientation of Janice accelerometer
ARM: dts: href: Mount matrices for TVK R2
ARM: dts: ux500: Fix some compatible strings
ARM: dts: ux500: Drop drdy pin assignment from magnetometer
ARM: dts: ux500: Fix orientation of accelerometer
ARM: dts: ux500: Rename gpio-controller node
ARM: dts: ux500: Fix interrupt cells
Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 400
ARM: dts: Add Raspberry Pi 400 support
ARM: dts: bcm283x: Fix up GPIO LED node names
dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
ARM: dts: Move BCM2711 RPi specific into separate dtsi
ARM: dts: bcm283x: Fix up MMC node names
ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
ARM: dts: BCM5301X: Fixup SPI binding
dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
ARM: dts: BCM5301X: Fix pinmux subnodes names
ARM: dts: Hurricane 2: Fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: NSP: dts: fix NAND nodes names
ARM: Cygnus: dts: fix NAND nodes names
ARM: brcmstb: dts: fix NAND nodes names
ARM: dts: BCM5301X: Fix NAND nodes names
Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
STM32 DT updates for v5.14, round 1
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: fix stpmic node for stm32mp1 boards
ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
ARM: dts: stm32: add a new DCMI pins group on stm32mp15
ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
dt-bindings: net: document ptp_ref clk in dwmac
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung DTS ARM changes for v5.14
1. Several cleanups and alignment with dtschema. This includes removal
of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
example from Suspend to RAM where the PMIC RTC's power is still
supplied).
3. Disable unused/not implemented camera on GT-I9100.
* tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Disable unused camera input for I9100
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family
ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa
ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3
ARM: dts: exynos: enable PMIC wakeup from suspend on Midas
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale
ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412
ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core
ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100
ARM: dts: exynos: align Broadcom WiFi with dtschema
Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
