Pull networking fixes from David Miller:
1) Fix leak in nl80211 AP start where we leak the ACL memory, from
Johannes Berg.
2) Fix double mutex unlock in mac80211, from Andrei Otcheretianski.
3) Fix RCU stall in ipset, from Jozsef Kadlecsik.
4) Fix devlink locking in devlink_dpipe_table_register, from Madhuparna
Bhowmik.
5) Fix race causing TX hang in ll_temac, from Esben Haabendal.
6) Stale eth hdr pointer in br_dev_xmit(), from Nikolay Aleksandrov.
7) Fix TX hash calculation bounds checking wrt. tc rules, from Amritha
Nambiar.
8) Size netlink responses properly in schedule action code to take into
consideration TCA_ACT_FLAGS. From Jiri Pirko.
9) Fix firmware paths for mscc PHY driver, from Antoine Tenart.
10) Don't register stmmac notifier multiple times, from Aaro Koskinen.
11) Various rmnet bug fixes, from Taehee Yoo.
12) Fix vsock deadlock in vsock transport release, from Stefano
Garzarella.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
net: dsa: mv88e6xxx: Fix masking of egress port
mlxsw: pci: Wait longer before accessing the device after reset
sfc: fix timestamp reconstruction at 16-bit rollover points
vsock: fix potential deadlock in transport->release()
unix: It's CONFIG_PROC_FS not CONFIG_PROCFS
net: rmnet: fix packet forwarding in rmnet bridge mode
net: rmnet: fix bridge mode bugs
net: rmnet: use upper/lower device infrastructure
net: rmnet: do not allow to change mux id if mux id is duplicated
net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device()
net: rmnet: fix suspicious RCU usage
net: rmnet: fix NULL pointer dereference in rmnet_changelink()
net: rmnet: fix NULL pointer dereference in rmnet_newlink()
net: phy: marvell: don't interpret PHY status unless resolved
mlx5: register lag notifier for init network namespace only
unix: define and set show_fdinfo only if procfs is enabled
hinic: fix a bug of rss configuration
hinic: fix a bug of setting hw_ioctxt
hinic: fix a irq affinity bug
net/smc: check for valid ib_client_data
...
Change in API of bootconfig (before it comes live in a release)
- Have a magic value "BOOTCONFIG" in initrd to know a bootconfig exists
- Set CONFIG_BOOT_CONFIG to 'n' by default
- Show error if "bootconfig" on cmdline but not compiled in
- Prevent redefining the same value
- Have a way to append values
- Added a SELECT BLK_DEV_INITRD to fix a build failure
Synthetic event fixes:
- Switch to raw_smp_processor_id() for recording CPU value in preempt
section. (No care for what the value actually is)
- Fix samples always recording u64 values
- Fix endianess
- Check number of values matches number of fields
- Fix a printing bug
Fix of trace_printk() breaking postponed start up tests
Make a function static that is only used in a single file.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXlW4vxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtioAP0WLEm3dWO0z3321h/a0DSshC+Bslu3
HDPTsGVGrXmvggEA/lr1ikRHd8PsO7zW8BfaZMxoXaTqXiuSrzEWxnMlFw0=
=O8PM
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing and bootconfig updates:
"Fixes and changes to bootconfig before it goes live in a release.
Change in API of bootconfig (before it comes live in a release):
- Have a magic value "BOOTCONFIG" in initrd to know a bootconfig
exists
- Set CONFIG_BOOT_CONFIG to 'n' by default
- Show error if "bootconfig" on cmdline but not compiled in
- Prevent redefining the same value
- Have a way to append values
- Added a SELECT BLK_DEV_INITRD to fix a build failure
Synthetic event fixes:
- Switch to raw_smp_processor_id() for recording CPU value in preempt
section. (No care for what the value actually is)
- Fix samples always recording u64 values
- Fix endianess
- Check number of values matches number of fields
- Fix a printing bug
Fix of trace_printk() breaking postponed start up tests
Make a function static that is only used in a single file"
* tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue
bootconfig: Add append value operator support
bootconfig: Prohibit re-defining value on same key
bootconfig: Print array as multiple commands for legacy command line
bootconfig: Reject subkey and value on same parent key
tools/bootconfig: Remove unneeded error message silencer
bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
bootconfig: Set CONFIG_BOOT_CONFIG=n by default
tracing: Clear trace_state when starting trace
bootconfig: Mark boot_config_checksum() static
tracing: Disable trace_printk() on post poned tests
tracing: Have synthetic event test use raw_smp_processor_id()
tracing: Fix number printing bug in print_synth_event()
tracing: Check that number of vals matches number of synth event fields
tracing: Make synth_event trace functions endian-correct
tracing: Make sure synth_event_trace() example always uses u64
This Kselftest kunit update consists of fixes to documentation and
run-time tool from Brendan Higgins and Heidi Fahim.
-----BEGIN PGP SIGNATURE-----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=Q7Zl
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"This Kselftest kunit update consists of fixes to documentation and
the run-time tool from Brendan Higgins and Heidi Fahim"
* tag 'linux-kselftest-kunit-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: run kunit_tool from any directory
kunit: test: Improve error messages for kunit_tool when kunitconfig is invalid
Documentation: kunit: fixed sphinx error in code block
This Kselftest update for Linux 5.6-rc4 consists of:
- fixes to TIMEOUT failures and out-of-tree compilation compilation
errors from Michael Ellerman.
- Declutter git status fix from Christophe Leroy
-----BEGIN PGP SIGNATURE-----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=QRUz
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- fixes to TIMEOUT failures and out-of-tree compilation compilation
errors from Michael Ellerman.
- declutter git status fix from Christophe Leroy
* tag 'linux-kselftest-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/rseq: Fix out-of-tree compilation
selftests: Install settings files to fix TIMEOUT failures
selftest/lkdtm: Don't pollute 'git status'
Add a specific test for the crash reported by Phil Sutter and addressed
in the previous patch. The test cases that, in my intention, should
have covered these cases, that is, the ones from the 'concurrency'
section, don't run these sequences tightly enough and spectacularly
failed to catch this.
While at it, define a convenient way to add these kind of tests, by
adding a "reported issues" test section.
It's more convenient, for this particular test, to execute the set
setup in its own function. However, future test cases like this one
might need to call setup functions, and will typically need no tools
other than nft, so allow for this in check_tools().
The original form of the reproducer used here was provided by Phil.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Before nftables commit fb9cea50e8b3 ("main: enforce options before
commands"), 'nft list ruleset -a' happened to work, but it's wrong
and won't work anymore. Replace it by 'nft -a list ruleset'.
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: 611973c1e0 ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
The commits introducing 'mlock-random-test'[1], 'map_fiex_noreplace'[2],
and 'thuge-gen'[3] have not added those in the 'run_vmtests' script and
thus the 'run_tests' command of kselftests doesn't run those. This
commit adds those in the script.
'gup_benchmark' and 'transhuge-stress' are also not included in the
'run_vmtests', but this commit does not add those because those are for
performance measurement rather than pass/fail tests.
[1] commit 26b4224d99 ("selftests: expanding more mlock selftest")
[2] commit 91cbacc345 ("tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE")
[3] commit fcc1f2d5dd ("selftests: add a test program for variable huge page sizes in mmap/shmget")
Link: http://lkml.kernel.org/r/20200206085144.29126-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add append value operator "+=" support to bootconfig syntax.
With this operator, user can add new value to the key as
an entry of array instead of overwriting.
For example,
foo = bar
...
foo += baz
Then the key "foo" has "bar" and "baz" values as an array.
Link: http://lkml.kernel.org/r/158227283195.12842.8310503105963275584.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, bootconfig adds a new value on the existing key to the tail of an
array. But this looks a bit confusing because an admin can easily rewrite
the original value in the same config file.
This rejects the following value re-definition.
key = value1
...
key = value2
You should rewrite value1 to value2 in this case.
Link: http://lkml.kernel.org/r/158227282199.12842.10110929876059658601.stgit@devnote2
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Fixed spelling of arraies to arrays ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reject if a value node is mixed with subkey node on same
parent key node.
A value node can not co-exist with subkey node under some key
node, e.g.
key = value
key.subkey = another-value
This is not be allowed because bootconfig API is not designed
to handle such case.
Link: http://lkml.kernel.org/r/158220115232.26565.7792340045009731803.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Remove error message silent knob, we don't need it anymore
because we can check if there is a bootconfig by checking
the magic word.
If there is a magic word, but failed to load a bootconfig
from initrd, there is a real problem.
Link: http://lkml.kernel.org/r/158220113256.26565.14264598654427773104.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.
The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.
[Initrd][bootconfig][size][csum][#BOOTCONFIG\n]
Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently if you build with O=... the rseq tests don't build:
$ make O=$PWD/output -C tools/testing/selftests/ TARGETS=rseq
make: Entering directory '/linux/tools/testing/selftests'
...
make[1]: Entering directory '/linux/tools/testing/selftests/rseq'
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -shared -fPIC rseq.c -lpthread -o /linux/output/rseq/librseq.so
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_test.c -lpthread -lrseq -o /linux/output/rseq/basic_test
/usr/bin/ld: cannot find -lrseq
collect2: error: ld returned 1 exit status
This is because the library search path points to the source
directory, not the output.
We can fix it by changing the library search path to $(OUTPUT).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit b43e78f65b ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This Kselftest update for Linux 5.6-rc3 consists of fixes to build
failures and other test bugs.
-----BEGIN PGP SIGNATURE-----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=OFRu
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to build failures and other test bugs"
* tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: openat2: fix build error on newer glibc
selftests: use LDLIBS for libraries instead of LDFLAGS
selftests: fix too long argument
selftests: allow detection of build failures
Kernel selftests: tpm2: check for tpm support
selftests/ftrace: Have pid filter test use instance flag
selftests: fix spelling mistaked "chaigned" -> "chained"
Alexei Starovoitov says:
====================
pull-request: bpf 2020-02-19
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 93 insertions(+), 31 deletions(-).
The main changes are:
1) batched bpf hashtab fixes from Brian and Yonghong.
2) various selftests and libbpf fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implemented small fix so that the script changes work directories to the
root of the linux kernel source tree from which kunit.py is run. This
enables the user to run kunit from any working directory. Originally
considered using os.path.join but this is more error prone as we would
have to find all file path usages and modify them accordingly. Using
os.chdir ensures that the entire script is run within /linux.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previous error message for invalid kunitconfig was vague. Added to it so
that it lists invalid fields and prompts for them to be removed. Added
validate_config function returning whether or not this kconfig is valid.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kernel only accepts map names with alphanumeric characters, underscores
and periods in their name. However, the auto-generated internal map names
used by libbpf takes their prefix from the user-supplied BPF object name,
which has no such restriction. This can lead to "Invalid argument" errors
when trying to load a BPF program using global variables.
Fix this by sanitising the map names, replacing any non-allowed characters
with underscores.
Fixes: d859900c4c ("bpf, libbpf: support global data/bss/rodata sections")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200217171701.215215-1-toke@redhat.com
The performance of bpf_redirect() is now roughly the same as that of
bpf_redirect_map(). However, David Ahern pointed out that the header file
has not been updated to reflect this, and still says that a significant
performance increase is possible when using bpf_redirect_map(). Remove this
text from the bpf_redirect_map() description, and reword the description in
bpf_redirect() slightly. Also fix the 'Return' section of the
bpf_redirect_map() documentation.
Fixes: 1d233886dd ("xdp: Use bulking for non-map XDP_REDIRECT and consolidate code paths")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200218130334.29889-1-toke@redhat.com
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid
that. 0x14 and 0x18 would be better and works as well.
Reported-by: Petr Machata <petrm@mellanox.com>
Fixes: 4e867c9a50 ("selftests: forwarding: vxlan_bridge_1d: fix tos value")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This gives us fewer dependencies and shortens build time, fixes up some
hash checking race conditions, and also fixes missing directory creation
that caused issues on massively parallel builds.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 71130f2997 ("vxlan: fix tos value before xmit") we start
strict vxlan xmit tos value by RT_TOS(), which limits the tos value less
than 0x1E. With current value 0x40 the test will failed with "v1: Expected
to capture 10 packets, got 0". So let's choose a smaller tos value for
testing.
Fixes: d417ecf533 ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 2759647247 ("ipv6: fix ECMP route replacement") it is no
longer possible to replace an ECMP-able route by a non ECMP-able route.
For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0
ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.
Tweak the replacement logic so that point 3 in the log of the above commit
becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route
exists, replace matching ECMP-able route (if any) or add the new route.
We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same
"ECMP-able-ness" as the replace argument. If there is no such candidate,
fallback to the first route found.
Fixes: 2759647247 ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect()
without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to
the inner proto.
So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP
proto.
For test mirror_gre.sh, it may make user confused if we capture ICMP
message on $h3(since the flow is GRE message). So I move the capture
dev to h3-gt{4,6}, and only capture ICMP message.
Before the fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
After fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
Fixes: ba8d39871a ("selftests: forwarding: Add test for mirror to gretap")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <pmachata@gmail.com>
Tested-by: Petr Machata <pmachata@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KVM documentation to rst format, which was very welcome.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeRYe2AAoJEL/70l94x66DSdsH/31rMoISGbPReQNKDZtondwr
UNLYHBLau46OR5JiLaKDqRODi12CXwrB6KZyRtQg+PeU/aCaFqW09kDOtMdV4AMl
2bEl4VfUuClsGXBQL5WWsb+adaWxHBtRFPcaT0xMAE+JXxAvt2o7rstOydM4yB9f
vM9TqEP+oVGyqx0FsuCND+zu/qZqNOOqJ1eZCrzqZKwFS8lrjsYtBG4K8rfnvXnI
uGxFnbmZuJKpXpRgCebDdB98m0KEWfAs0S8aOO4NRfmymUBcjMeIeqQz0Mnt17xJ
Fz0KktwdGL28qJ+fnE51i/IBqCoBJL2BmIesSiGKVr1alpHA1ngKvUmcbtHkAXw=
=To92
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and improvements to selftests.
On top of this, Mauro converted the KVM documentation to rst format,
which was very welcome"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
docs: virt: guest-halt-polling.txt convert to ReST
docs: kvm: review-checklist.txt: rename to ReST
docs: kvm: Convert timekeeping.txt to ReST format
docs: kvm: Convert s390-diag.txt to ReST format
docs: kvm: Convert ppc-pv.txt to ReST format
docs: kvm: Convert nested-vmx.txt to ReST format
docs: kvm: Convert mmu.txt to ReST format
docs: kvm: Convert locking.txt to ReST format
docs: kvm: Convert hypercalls.txt to ReST format
docs: kvm: arm/psci.txt: convert to ReST
docs: kvm: convert arm/hyp-abi.txt to ReST
docs: kvm: Convert api.txt to ReST format
docs: kvm: convert devices/xive.txt to ReST
docs: kvm: convert devices/xics.txt to ReST
docs: kvm: convert devices/vm.txt to ReST
docs: kvm: convert devices/vfio.txt to ReST
docs: kvm: convert devices/vcpu.txt to ReST
docs: kvm: convert devices/s390_flic.txt to ReST
docs: kvm: convert devices/mpic.txt to ReST
docs: kvm: convert devices/arm-vgit.txt to ReST
...
Pull perf fixes from Ingo Molnar:
"Fixes and HW enablement patches:
- Tooling fixes, most of which are tooling header synchronization
with v5.6 changes
- Fix kprobes fallout on ARM
- Add Intel Elkhart Lake support and extend Tremont support, these
are relatively simple and should only affect those models
- Fix the AMD family 17h generic event table"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
perf llvm: Fix script used to obtain kernel make directives to work with new kbuild
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers x86: Sync disabled-features.h
tools include UAPI: Sync sound/asound.h copy
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf tools: Add arm64 version of get_cpuid()
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers uapi: Sync linux/fscrypt.h with the kernel sources
tools headers UAPI: Sync sched.h with the kernel
perf trace: Resolve prctl's 'option' arg strings to numbers
perf beauty prctl: Export the 'options' strarray
tools headers UAPI: Sync prctl.h with the kernel sources
tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sources
perf maps: Move kmap::kmaps setup to maps__insert()
perf maps: Fix map__clone() for struct kmap
perf maps: Mark ksymbol DSOs with kernel type
perf maps: Mark module DSOs with kernel type
tools include UAPI: Sync x86's syscalls_64.tbl, generic unistd.h and fcntl.h to pick up openat2 and pidfd_getfd
...
Pull networking fixes from David Miller:
1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew
Lunn.
2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen.
3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet.
4) Add some missing netlink attribute validation to matchall and
flower, from Davide Caratti.
5) Send icmp responses properly when NAT has been applied to the frame
before we get to the tunnel emitting the icmp, from Jason Donenfeld.
6) Make sure there is enough SKB headroom when adding dsa tags for qca
and ar9331. From Per Forlin.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
netdevice.h: fix all kernel-doc and Sphinx warnings
net: dsa: tag_ar9331: Make sure there is headroom for tag
net: dsa: tag_qca: Make sure there is headroom for tag
net, ip6_tunnel: enhance tunnel locate with link check
net/smc: no peer ID in CLC decline for SMCD
net/smc: transfer fasync_list in case of fallback
net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
net: hns3: fix VF bandwidth does not take effect in some case
net: hns3: add management table after IMP reset
mac80211: fix wrong 160/80+80 MHz setting
cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
xfrm: interface: use icmp_ndo_send helper
wireguard: device: use icmp_ndo_send helper
sunvnet: use icmp_ndo_send helper
gtp: use icmp_ndo_send helper
icmp: introduce helper for nat'd source address in network device context
net/sched: flower: add missing validation of TCA_FLOWER_FLAGS
net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS
net/flow_dissector: remove unexist field description
page_pool: refill page when alloc.count of pool is zero
...
Before this patch:
# ./perf test 39 41
39: LLVM search and compile :
39.1: Basic BPF llvm compile : Ok
39.2: kbuild searching : FAILED!
39.3: Compile source for BPF prologue generation : Skip
39.4: Compile source for BPF relocation : Skip
41: BPF filter :
41.1: Basic BPF filtering : Ok
41.2: BPF pinning : Ok
41.3: BPF prologue generation : FAILED!
41.4: BPF relocation checker : Skip
#
Using 'perf test -v' for these tests shows that it is not finding
uapi/linux/fs.h, which ends up being because we don't setup the right header
path. Fix it.
After this patch:
# perf test 39 41
39: LLVM search and compile :
39.1: Basic BPF llvm compile : Ok
39.2: kbuild searching : Ok
39.3: Compile source for BPF prologue generation : Ok
39.4: Compile source for BPF relocation : Ok
41: BPF filter :
41.1: Basic BPF filtering : Ok
41.2: BPF pinning : Ok
41.3: BPF prologue generation : Ok
41.4: BPF relocation checker : Ok
#
Longer description:
In llvm-utils.c we use some techniques to obtain the kbuild make
directives and that recently stopped working as now 'ar' gets called and
expects to find the dummy.o used to echo these variables:
$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)
Add the $(CC) line to satisfy that, making sure this works with all
kernels, i.e. preserving the temp directory and files in it used for
this technique we can see that it works everywhere:
# make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 4
drwx------. 2 root root 80 Feb 14 09:42 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:42 ..
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
#
# cat /tmp/tmp.qgaFHgxjZ4/Makefile
obj-y := dummy.o
$(obj)/%.o: $(src)/%.c
@echo -n "$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)"
$(CC) -c -o $@ $<
#
Then build with an old kernel Makefile:
# make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o
-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I./arch/x86/include -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h
#
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 8
drwx------. 2 root root 100 Feb 14 09:43 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:43 ..
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 936 Feb 14 09:43 dummy.o
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
#
And a new one:
# make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 4
drwx------. 2 root root 80 Feb 14 09:43 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:43 ..
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
# make -s -C /lib/modules/5.6.0-rc1+/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o
-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
#
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 16
drwx------. 2 root root 160 Feb 14 09:44 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:44 ..
-rw-r--r--. 1 root root 158 Feb 14 09:44 built-in.a
-rw-r--r--. 1 root root 149 Feb 14 09:44 .built-in.a.cmd
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 936 Feb 14 09:44 dummy.o
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
-rw-r--r--. 1 root root 0 Feb 14 09:44 modules.order
#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: https://www.spinics.net/lists/linux-perf-users/msg10600.html
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because wireguard is calling icmp from network device context, it should
use the ndo helper so that the rate limiting applies correctly. This
commit adds a small test to the wireguard test suite to ensure that the
new functions continue doing the right thing in the context of
wireguard. It does this by setting up a condition that will definately
evoke an icmp error message from the driver, but along a nat'd path.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It appears that newer glibcs check that openat(O_CREAT) was provided a
fourth argument (rather than passing garbage), resulting in the
following build error:
> In file included from /usr/include/fcntl.h:301,
> from helpers.c:9:
> In function 'openat',
> inlined from 'touchat' at helpers.c:49:11:
> /usr/include/x86_64-linux-gnu/bits/fcntl2.h:126:4: error: call to
> '__openat_missing_mode' declared with attribute error: openat with O_CREAT
> or O_TMPFILE in third argument needs 4 arguments
> 126 | __openat_missing_mode ();
> | ^~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While building selftests, the following errors were observed:
> tools/testing/selftests/timens'
> gcc -Wall -Werror -pthread -lrt -ldl timens.c -o tools/testing/selftests/timens/timens
> /usr/bin/ld: /tmp/ccGy5CST.o: in function `check_config_posix_timers':
> timens.c:(.text+0x65a): undefined reference to `timer_create'
> collect2: error: ld returned 1 exit status
Quoting commit 870f193d48 ("selftests: net: use LDLIBS instead of
LDFLAGS"):
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
While at here, correct other selftests, not only timens ones.
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
x86_register enum is not used, let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
L2 guest calls vmcall and L1 checks the exit status does
correspond.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the basic infrastructure needed to test AMD nested SVM.
This is largely copied from the KVM unit test infrastructure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
get_gdt_base() and get_idt_base() only return the base address
of the descriptor tables. Soon we will need to get the size as well.
Change the prototype of those functions so that they return
the whole desc_ptr struct instead of the address field.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Wei Huang <wei.huang2@amd.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYN cookie test with reuseport BPF doesn't make sense for UDP sockets. We
don't run it but the test_progs test runner doesn't know about it. Mark the
test as skipped so the test_progs can report correctly how many tests were
skipped.
Fixes: 7ee0d4e97b ("selftests/bpf: Switch reuseport tests for test_progs framework")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200212103208.438419-1-jakub@cloudflare.com
There is a typo in checking the "saved_tcp_fo" and instead
"saved_tcp_syncookie" is checked again. This patch fixes it
and also breaks them into separate if statements such that
the test will abort asap.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200211175910.3235321-1-kafai@fb.com
To pick up the changes from:
7de3f1423f ("KVM: s390: Add new reset vcpu API")
So far we're ignoring those arch specific ioctls, we need to revisit
this at some time to have arch specific tables, etc:
$ grep S390 tools/perf/trace/beauty/kvm_ioctl.sh
egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
290a6bb06d ("arm64: KVM: Add UAPI notes for swapped registers")
No tools changes are caused by this.
This addresses these tools/perf build warnings:
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
85c17291e2 ("x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured")
f444a5ff95 ("x86/cpufeatures: Add support for fast short REP; MOVSB")
These don't cause any changes in tooling, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To silence the following tools/perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Picking up the changes in:
45fc24e89b ("x86/mpx: remove MPX from arch/x86")
that didn't entail any functionality change in the tooling side.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
46b770f720 ("ALSA: uapi: Fix sparse warning")
a103a39899 ("ALSA: control: Fix incompatible protocol error")
bd3eb4e87e ("ALSA: ctl: bump protocol version up to v2.1.0")
ff16351e3f ("ALSA: ctl: remove dimen member from elem_info structure")
5422835666 ("ALSA: ctl: remove unused macro for timestamping of elem_value")
7fd7d6c504 ("ALSA: uapi: Fix typos and header inclusion in asound.h")
1cfaef9617 ("ALSA: bump uapi version numbers")
80fe7430c7 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control")
07094ae6f9 ("ALSA: Avoid using timespec for struct snd_timer_tread")
d9e5582c4b ("ALSA: Avoid using timespec for struct snd_rawmidi_status")
3ddee7f88a ("ALSA: Avoid using timespec for struct snd_pcm_status")
a4e7dd35b9 ("ALSA: Avoid using timespec for struct snd_ctl_elem_value")
a07804cc74 ("ALSA: Avoid using timespec for struct snd_timer_status")
Which entails no changes in the tooling side.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
d41938d2cb ("mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use")
No changes in tooling, just a rebuild as files needed got touched.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an arm64 version of get_cpuid(), which is used for various annotation
and headers - for example, I now get the CPUID in "perf report --header",
as shown in this snippet:
# hostname : ubuntu
# os release : 5.5.0-rc1-dirty
# perf version : 5.5.rc1.gbf8a13dc9851
# arch : aarch64
# nrcpus online : 96
# nrcpus avail : 96
# cpuid : 0x00000000480fd010
Since much of the code to read the MIDR is already in get_cpuid_str(),
factor out this code.
Tester notes:
I tested this patch on my new ARM64 Kunpeng 920 server.
[root@node1 zsk]# ./perf --version
perf version 5.6.rc1.g2cdb955b7252
Both perf list and perf stat can work.
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1576245255-210926-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the change in:
cc662126b4 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
e933adde6f ("fscrypt: include <linux/ioctl.h> in UAPI header")
93edd392ca ("fscrypt: support passing a keyring key to FS_IOC_ADD_ENCRYPTION_KEY")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically.
To ease complaints about taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event
(soft disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXkMTwRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnJQAQD5aKiD6jx+zGtLsFTuZMcEGvhhUuJ6
oUaSvhKO3UqezwD/V5avKuuC0wWt//gOWDY+0+4QNjmvn1GLnaNYohs6fg0=
=NLT9
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes:
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically. To ease complaints about
taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event (soft
disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)"
* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Consolidate trace() functions
tracing: Don't return -EINVAL when tracing soft disabled synth events
tracing: Add missing nest end to synth_event_trace_start() error case
tools/bootconfig: Suppress non-error messages
bootconfig: Allocate xbc_nodes array dynamically
bootconfig: Use parse_args() to find bootconfig and '--'
tracing/kprobe: Fix uninitialized variable bug
bootconfig: Remove unneeded CONFIG_LIBXBC
tools/bootconfig: Fix wrong __VA_ARGS__ usage
To get the changes in:
769071ac9f ("ns: Introduce Time Namespace")
Silencing this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Which enables 'perf trace' to decode the CLONE_NEWTIME bit in the
'flags' argument to the clone syscalls.
Example of clone flags being decoded:
[root@quaco ~]# perf trace -e clone*
0.000 qemu-system-x8/23923 clone(clone_flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, newsp: 0x7f0dad7f9870, parent_tidptr: 0x7f0dad7fa9d0, child_tidptr: 0x7f0dad7fa9d0, tls: 0x7f0dad7fa700) = 6806 (qemu-system-x86)
? qemu-system-x8/6806 ... [continued]: clone()) = 0
^C[root@quaco ~]#
At some point this should enable things like:
# perf trace -e 'clone*/clone_flags&NEWTIME/'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
