Back in commit a4b2b01523 ("drm/i915: Don't mark an execlists
context-switch when idle") we noticed the presence of late
context-switch interrupts. We were able to filter those out by looking
at whether the ELSP remained active, but in commit beecec9017
("drm/i915/execlists: Preemption!") that became problematic as we now
anticipate receiving a context-switch event for preemption while ELSP
may be empty. To restore the spurious interrupt suppression, add a
counter for the expected number of pending context-switches and skip if
we do not need to handle this interrupt to make forward progress.
v2: Don't forget to switch on for preempt.
v3: Reduce the counter to a on/off boolean tracker. Declare the HW as
active when we first submit, and idle after the final completion event
(with which we confirm the HW says it is idle), and track each source
of activity separately. With a finite number of sources, it should aide
us in debugging which gets stuck.
Fixes: beecec9017 ("drm/i915/execlists: Preemption!")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 4a118ecbe9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prepared substructure rps for RPS related state. autoenable_work is
used for RC6 too hence it is defined outside rps structure. As we do
this lot many functions are refactored to use intel_rps *rps to access
rps related members. Hence renamed intel_rps_client pointer variables
to rps_client in various functions.
v2: Rebase.
v3: s/pm/gt_pm (Chris)
Refactored access to rps structure by declaring struct intel_rps * in
many functions.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-9-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-8-chris@chris-wilson.co.uk
There is function to tell how many ports we have, so use it.
We still have direct relationship with array size and port count,
so no harm was done.
Fixes: 76e70087d3 ("drm/i915: Make execlist port count variable")
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010114857.13108-1-mika.kuoppala@intel.com
Commit faf654864b ("drm/i915: Unify uC variable types to avoid
flooding checkpatch.pl") breaks 32-bit kernel builds. Lets use
cast helper to make compiler happy.
v2: introduce ptr_to_u64 (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006130844.49012-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
With the code motion mostly done, convert all the uC code away
from uint??_t at once (only a couple dozen variables), so that
reading the checkpatch.pl output should actually pinpoint if
a new uint??_t was accidentally introduced.
v2: - Include intel_uc_fw.h too (Sagar)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006084940.15910-1-joonas.lahtinen@linux.intel.com
Move GuC submission declarations into dedicated header as we want to
keep uC specific code in separate files.
v2: fix include (Chris)
update commit message (Joonas)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: MichaĹ Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-3-michal.wajdeczko@intel.com
As we emulate execlists on top of the GuC workqueue, it is not
restricted to just 2 ports and we can increase that number arbitrarily
to trade-off queue depth (i.e. scheduling latency) against pipeline
bubbles.
v2: rebase. better commit msg (Chris)
v3: rebase
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922124307.10914-5-mika.kuoppala@intel.com
When first execlist entry is processed, we move the port (contents).
Introduce function for this as execlist and guc use this common
operation.
v2: rebase. s/GEM_DEBUG_BUG/GEM_BUG (Chris)
v3: rebase
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922124307.10914-4-mika.kuoppala@intel.com
Engine's execlist related items have been increasing to
a point where a separate struct is warranted. Carve execlist
specific items to a dedicated struct to add clarity.
v2: add kerneldoc and fix whitespace (Joonas, Chris)
v3: csb_mmio changes, rebase
v4: s/\b(el|execlist)\b/execlists/ (Joonas)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> (v3)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v3)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922124307.10914-1-mika.kuoppala@intel.com
Our global struct with params is named exactly the same way
as new preferred name for the drm_i915_private function parameter.
To avoid such name reuse lets use different name for the global.
v5: pure rename
v6: fix
Credits-to: Coccinelle
@@
identifier n;
@@
(
- i915.n
+ i915_modparams.n
)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com
We can just operate on the wq_tail directly (in the process descriptor).
This allows us to remove the duplicated tail from the client. While I'm
here let's also remove the constants kept in the client and document our
locking requirements. This causes a small change in one of GuC debugfs
files. We're no longer reporting constant values (which I don't think
is a problem), but we're also no longer reporting the tail (does anyone
care?).
v2: Update tail after wqi contents. (Chris)
v3: Really update tail after wqi contents.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918092536.12287-1-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
All we're really doing is incrementing a simple counter in a
doorbell_info struct. We can do without extra variables and a separate
counter kept in guc_client. Since it's gone, we're also removing its
debugfs.
The only functional change here, is that we're no longer treating 0 as a
special value. GuC doesn't seem to care, why should we?
v2: Restore desc->tail update.
v3: Drop the retry loop, assert that doorbell cookie doesn't change
behind our back.
v4: WARN rather than BUG, use xchg. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914105125.3031-1-michal.winiarski@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
To create an upper bound on number of GuC workitems, we need to change
the way that requests are being submitted. Rather than submitting each
request as an individual workitem, we can do coalescing in a similar way
we're handlig execlist submission ports. We also need to stop pretending
that we're doing "lite-restore" in GuC submission (we would create a
workitem each time we hit this condition). This allows us to completely
remove the reservation, replacing it with a compile time check.
v2: Also coalesce when replaying on reset (Daniele)
v3: Consistent wq_resv - per-request (Daniele)
v4: Squash removing wq_resv
v5: Reflect i915_guc_submit argument changes in doc
v6: Rebase on top of execlists reset/restart fix (Chris,Michał)
References: https://bugs.freedesktop.org/show_bug.cgi?id=101873
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-2-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Originally removed in:
c1adab9703 ("drm/i915/guc: Remove failed doorbell stat from debugfs")
f1448a62a1 ("drm/i915/guc: Remove last submission result from debugfs")
Were accidentally restored in:
925344ccc9 ("BackMerge tag 'v4.12-rc5' into drm-next")
We can also remove unused variable and replace it with a WARN.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-1-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Using the HWSP ggtt_offset to get the lrca offset is only correct if the
HWSP happens to be before it (when we reuse the PPHWSP of the kernel
context as the engine HWSP). Instead of making this assumption, get the
lrca offset from the kernel_context engine state.
And while looking at this part of the GuC interaction, it was also
noticed that the firmware expects the size of only the engine context
(context minus the execlist part, i.e. don't include the first 80
dwords), so pass the right size.
v2: Use the new macros to prevent abusive overuse of the old ones (Chris).
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712193032.27080-2-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-2-chris@chris-wilson.co.uk
Not only the context image consist of two parts (the PPHWSP, and the
logical context state), but we also allocate a header at the start of
for sharing data with GuC. Thus every lrc looks like this:
| [guc] | [hwsp] [logical state] |
|<- our header ->|<- context image ->|
So far, we have oversimplified whenever we use each of these parts of the
context, just because the GuC header happens to be in page 0, and the
(PP)HWSP is in page 1. But this had led to using the same define for more
than one meaning (as a page index in the lrc and as 1 page).
This patch adds defines for the GuC shared page, the PPHWSP page and the
start of the logical state. It also updated the places where the old
define was being used. Since we are not changing the size (or format) of
the context, there are no functional changes.
v2: Use PPHWSP index for hws again.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170712193032.27080-1-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-1-chris@chris-wilson.co.uk
The default values for the default scheduling policy come from the
GuC firmware itself. Transform the magic numbers into defines.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505252197-27696-1-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We are passing parameters in the wrong order to find next zero bit, and
when it doesn't find anything it returns size (offset in the code), which
is always zero.
For reference the function is defined as:
find_next_bit( *addr, size, offset )
The incorrect parameter order was added by commit abddffdf36
("drm/i915/guc: Sanitize GuC client initialization"). Luckily, currently
we only use a single guc client and a single doorbell, which happens to be
zero; therefore it isn't necessary to backport this fix (which would be for
v4.12).
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531000546.30762-1-michel.thierry@intel.com
If port[0] is occupied and we're trying to dequeue request from
different context, we will inevitably hit BUG_ON in port_assign.
Let's skip it - similar to what we're doing in execlists counterpart.
Fixes: 77f0d0e925 ("drm/i915/execlists: Pack the count into the low bits of the port.request")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170523102400.9614-2-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Usefulness of these stats was over-advertised.
v2: remove duplicated engine stats (Chris)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515170610.35528-1-michal.wajdeczko@intel.com
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Debugfs does not seems to be a right place to display transient data.
If we want to capture errors, we should log them.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-3-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This stat is almost always zero unless fatal error occurs,
which should be reported by other means anyway.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-2-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The i915_priolist are allocated within an atomic context on a path where
we wish to minimise latency. If we use a dedicated kmem_cache, we have
the advantage of a local freelist from which to service new requests
that should keep the latency impact of an allocation small. Though
currently we expect the majority of requests to be at default priority
(and so hit the preallocate priolist), once userspace starts using
priorities they are likely to use many fine grained policies improving
the utilisation of a private slab.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-9-chris@chris-wilson.co.uk
All the requests at the same priority are executed in FIFO order. They
do not need to be stored in the rbtree themselves, as they are a simple
list within a level. If we move the requests at one priority into a list,
we can then reduce the rbtree to the set of priorities. This should keep
the height of the rbtree small, as the number of active priorities can not
exceed the number of active requests and should be typically only a few.
Currently, we have ~2k possible different priority levels, that may
increase to allow even more fine grained selection. Allocating those in
advance seems a waste (and may be impossible), so we opt for allocating
upon first use, and freeing after its requests are depleted. To avoid
the possibility of an allocation failure causing us to lose a request,
we preallocate the default priority (0) and bump any request to that
priority if we fail to allocate it the appropriate plist. Having a
request (that is ready to run, so not leading to corruption) execute
out-of-order is better than leaking the request (and its dependency
tree) entirely.
There should be a benefit to reducing execlists_dequeue() to principally
using a simple list (and reducing the frequency of both rbtree iteration
and balancing on erase) but for typical workloads, request coalescing
should be small enough that we don't notice any change. The main gain is
from improving PI calls to schedule, and the explicit list within a
level should make request unwinding simpler (we just need to insert at
the head of the list rather than the tail and not have to make the
rbtree search more complicated).
v2: Avoid use-after-free when deleting a depleted priolist
v3: Michał found the solution to handling the allocation failure
gracefully. If we disable all priority scheduling following the
allocation failure, those requests will be executed in fifo and we will
ensure that this request and its dependencies are in strict fifo (even
when it doesn't realise it is only a single list). Normal scheduling is
restored once we know the device is idle, until the next failure!
Suggested-by: Michał Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-8-chris@chris-wilson.co.uk
add/remove: 1/1 grow/shrink: 5/4 up/down: 391/-578 (-187)
function old new delta
execlists_submit_ports 262 471 +209
port_assign.isra - 136 +136
capture 6344 6359 +15
reset_common_ring 438 452 +14
execlists_submit_request 228 238 +10
gen8_init_common_ring 334 341 +7
intel_engine_is_idle 106 105 -1
i915_engine_info 2314 2290 -24
__i915_gem_set_wedged_BKL 485 411 -74
intel_lrc_irq_handler 1789 1604 -185
execlists_update_context 294 - -294
The most important change there is the improve to the
intel_lrc_irq_handler and excclist_submit_ports (net improvement since
execlists_update_context is now inlined).
v2: Use the port_api() for guc as well (even though currently we do not
pack any counters in there, yet) and hide all port->request_count inside
the helpers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-5-chris@chris-wilson.co.uk
Pre-calculate engine context size based on engine class and device
generation and store it in the engine instance.
v2:
- Squash and get rid of hw_context_size (Chris)
v3:
- Move after MMIO init for probing on Gen7 and 8 (Chris)
- Retained rounding (Tvrtko)
v4:
- Rebase for deferred legacy context allocation
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
If we are enabling the breadcrumbs signaling prior to submitting the
request, we know that we cannot have missed the interrupt and can
therefore skip immediately waking the signaler to check.
This reduces a significant chunk of the __i915_gem_request_submit()
overhead for inter-engine synchronisation, for example in gem_exec_whisper.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170426080659.28771-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We need to keep track of the last location we ask the hw to read up to
(RING_TAIL) separately from our last write location into the ring, so
that in the event of a GPU reset we do not tell the HW to proceed into
a partially written request (which can happen if that request is waiting
for an external signal before being executed).
v2: Refactor intel_ring_reset() (Mika)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144
Testcase: igt/gem_exec_fence/await-hang
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Fixes: d55ac5bf97 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170425130049.26147-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
This reverts commit 6c943de668 ("drm/i915: Skip execlists_dequeue()
early if the list is empty").
The validity of using READ_ONCE there depends upon having a mb to
coordinate the assignment of engine->execlist_first inside
submit_request() and checking prior to taking the spinlock in
execlists_dequeue(). We wrote "the update to TASKLET_SCHED incurs a
memory barrier making this cross-cpu checking safe", but failed to
notice that this mb was *conditional* on the execlists being ready, i.e.
there wasn't the required mb when it was most necessary!
We could install an unconditional memory barrier to fixup the
READ_ONCE():
diff --git a/drivers/gpu/drm/i915/intel_lrc.c
b/drivers/gpu/drm/i915/intel_lrc.c
index 7dd732cb9f57..1ed164b16d44 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -616,6 +616,7 @@ static void execlists_submit_request(struct
drm_i915_gem_request *request)
if (insert_request(&request->priotree, &engine->execlist_queue))
{
engine->execlist_first = &request->priotree.node;
+ smp_wmb();
if (execlists_elsp_ready(engine))
But we have opted to remove the race as it should be rarely effective,
and saves us having to explain the necessary memory barriers which we
quite clearly failed at.
Reported-and-tested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Fixes: 6c943de668 ("drm/i915: Skip execlists_dequeue() early if the list is empty")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329100052.29505-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Whilst I like having the assertions clearly visible in the code, they
are quite repetitious! As we find new limits we want to incorporate into
the set of assertions, it make sense to refactor them to a common
routine.
v2: Add a guc holdout.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327131412.20293-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We are going to need it for future platforms.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
A GuC context and a HW context are in no way related, so the name "GuC context descriptor"
is very unfortunate, because a new reader of the code gets overwhelmed very quickly with
a lot of things called "context" that refer to different things. We can improve legibility
a lot by simply renaming a few objects in the GuC code.
v2:
- Rebased
- s/ctx_desc_pool/stage_desc_pool
- Move some explanations to the definition of the guc_stage_desc struct (Chris)
v3:
- Calculate gemsize with less intermediate steps (Joonas)
- Use BIT() macro (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Some recent refactoring patches have left the doorbell creation outside
the GuC client allocation, which does not make a lot of sense (a client
without a doorbell is something useless). Move it back there, and
refactor the init_doorbell_hw consequently.
Thanks to this, we can do some other improvements, like hoisting the
check for GuC submission enabled out of the enable function.
v2: Rebased.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Doorbell release flow requires that we wait for GEN8_DRB_VALID bit to go
to zero after updating db_status before we call the GuC to release the
doorbell.
Kudos to Daniele for finding this out.
v2: WARN instead of DRM_ERROR (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
While at it, fix a typo (s/ring_lcra/ring_lrca) and improve the naming of one
firware interface field (s/ring_tail/submit_element_info, since it can contain
more than just the ring tail).
No change in functionality.
v2:
- Remove reference to "unique user" of the GuC (Daniele)
- Keep mention to renaming from "GuC context" to "client" (Daniele)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It's mandatory and it gets created if and only if GuC submission is enabled, so that should be
the condition for informing the GuC about it.
Also s/guc_addon_create/guc_ads_create and s/guc_addon_destroy/guc_ads_destroy and, while
at it, add an explanation of what things go inside the ADS object.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Starting with intel_guc_loader, down to intel_guc_submission
and finally to intel_guc_log.
v2:
- Null execbuf client outside guc_client_free (Daniele)
- Assert if things try to get allocated twice (Daniele/Joonas)
- Null guc->log.buf_addr when destroyed (Daniele)
- Newline between returning success and error labels (Joonas)
- Remove some unnecessary comments (Joonas)
- Keep guc_log_create_extras naming convention (Joonas)
- Helper function guc_log_has_extras (Joonas)
- No need for separate relay_channel create/destroy. It's just another extra.
- No need to nullify guc->log.flush_wq when destroyed (Joonas)
- Hoist the check for has_extras out of guc_log_create_extras (Joonas)
- Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele)
- Make sure initel_guc_fini is not called before init is ever called (Daniele)
v3:
- Remove unnecessary parenthesis (Joonas)
- Check for logs enabled on debugfs registration
- Rebase on top of Tvrtko's "Fix request re-submission after reset"
v4:
- Rebased
- Comment around enabling/disabling interrupts inside GuC logging (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The GuC descriptor is big in size. If we use a local definition of
guc_desc we have a chance to overflow stack, so avoid it.
Also, Chris abhors scatterlists :)
v2: Rebased, helper function to retrieve the context descriptor,
s/ctx_pool_vma/ctx_pool/
v3: Zero out guc_context_desc before initialization
v4: Do not do arithmetic on void pointers (Daniele)
v5: Nicer than arithmetic on pointers (Chris, Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Started adding proper teardown to guc_client_alloc, ended up removing
quite a few dead ends where errors communicating with the GuC were
silently ignored. There also seemed to be quite a few erronous
teardown actions performed in case of an error (ordering wrong).
v2:
- Increase function symmetry/proximity (Michal/Daniele)
- Fix __reserve_doorbell accounting for high priority (Daniele)
- Call __update_doorbell_desc! (Daniele)
- Isolate __guc_{,de}allocate_doorbell (Michal/Daniele)
v3:
- "Select" a cacheline is a more accurate verb than "reserve" (Daniele).
- We cannot update & create the doorbell without reserving it first, so
move the whole doorbell creation for execbuf_client to the submission
enable (Oscar).i
- Add a fixme for ignoring possible doorbell destroy errors.
v4:
- Remove comment about is_high_priority (Daniele)
- Debug message typo (Daniele)
- Reuse __get_doorbell in more places (Daniele)
- Do not do arithmetic on void pointers (Daniele)
- Add comment to __reset_doorbell (Daniele)
v5:
- gccisms like arithmetic on void pointers are not frowned upon (Oscar)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
It has to be called after the global seqno has been assigned.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 31de73501a ("drm/i915/scheduler: emulate a scheduler for guc")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320132556.29286-1-tvrtko.ursulin@linux.intel.com
Do an early read of the execlists' queue before we take the spinlock and
start checking. This is safe as the first writer to the execlists queue
will cause the tasklet to be run again after a memory barrier.
v2: Keep guc in sync with execlists queue changes
v3: Explain the mb between the tasklet running on one cpu and the
execlist_first update and schedule from a second cpu.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317120716.17191-1-chris@chris-wilson.co.uk
It turns out that we may want to restore the original
engine->submit_request (and engine->schedule) callbacks from more than
just the guc <-> execlists transition. Move this to a vfunc so we can
have a common interface.
v2: Move initial selection to intel_engines_init_common(), repaint vfunc
with engine->set_default_submission (and a similar colour for the
helper).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171305.12972-2-chris@chris-wilson.co.uk
This emulates execlists on top of the GuC in order to defer submission of
requests to the hardware. This deferral allows time for high priority
requests to gazump their way to the head of the queue, however it nerfs
the GuC by converting it back into a simple execlist (where the CPU has
to wake up after every request to feed new commands into the GuC).
v2: Drop hack status - though iirc there is still a lockdep inversion
between fence and engine->timeline->lock (which is impossible as the
nesting only occurs on different fences - hopefully just requires some
judicious lockdep annotation)
v3: Apply lockdep nesting to enabling signaling on the request, using
the pattern we already have in __i915_gem_request_submit();
v4: Replaying requests after a hang also now needs the timeline
spinlock, to disable the interrupts at least
v5: Hold wq lock for completeness, and emit a tracepoint for enabling signal
v6: Reorder interrupt checking for a happier gcc.
v7: Only signal the tasklet after a user-interrupt if using guc scheduling
v8: Restore lost update of rq through the i915_guc_irq_handler (Tvrtko)
v9: Avoid re-initialising the engine->irq_tasklet from inside a reset
v10: Hook up the execlists-style tracepoints
v11: Clear the execlists irq_posted bit after taking over the interrupt/tasklet
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316125619.6856-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Manual pointer manipulation is error prone. Let compiler calculate
right offsets for us in case we need to change ads layout.
v2: don't call it object (Chris)
v3: restyle offset assignments (Chris)
v4: stylistic reductions
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314133309.126432-1-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The REDIRECT_TO_GUC bit is a strange beast as it is a disable bit -
setting the bit in the pm interrupt generation stops the interrupt going
to the guc (not sending it to the guc as the name implies). To help the
reader rename it to DISABLE_REDIRECT_TO_GUC so that we keep the bspec
greppable name without it being as confusing!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170312132745.9618-1-chris@chris-wilson.co.uk
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
