Commit Graph

40 Commits

Author SHA1 Message Date
arnaud.patard@rtp-net.org
1a71e4ade1 ARM: H1940: Convert h1940 bluetooth driver to rfkill
Better using standard interfaces to enable/disable bluetooth

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:35:06 +00:00
Ben Dooks
438a09e1eb ARM: S3C2410: CPUFREQ: Add PLL table
Add PLL table for the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:52 +01:00
Ben Dooks
a24c091db9 ARM: S3C2410: CPUFREQ: Add core support.
Add core support for frequency scaling on the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:52 +01:00
Ben Dooks
1b3ba68884 [ARM] S3C2410: Move base clock code to plat-s3c24xx
Move the S3C2410 base clock list to arch/arm/plat-s3c24xx
as this code is common to the S3C2410, S3C2440 and S3C2442
cpus.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:47 +00:00
Ben Dooks
9d529c6e7b [ARM] S3C24XX: Add physmap device for all Simtec NOR equiped boards.
Move to using the physmap platform device code to attached NOR
flash on Simtec boards so that the old bast-flash driver can be
safely removed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:28 +01:00
Ben Dooks
b7a12d1923 [ARM] BAST/VR1000: Move to using ata_platform (libata)
Use the pata_platform driver to provide the IDE port
drivers on the Simntec BAST and Thorcom VR1000 machines
as a precursor to removing drivers/ide/arm/bast-ide.c

This will mean that the system will need SCSI and SCSI disc
support as a minimum, and any references to hdX will be
changed to sdX.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:27 +01:00
David Anders
79b34afa68 [ARM] 4963/1: S3C2410 - add basic machine support for the TCT Hammer
Add the TinCanTools Hammer board to list of supported machines in the
arch/arm/mach-s3c2410 directory, as well as a default config entry. the
mach-tct_hammer.c file initializes basic i/o, clocks, irqs, as well as
the mtd flash layout if enabled in the kernel configuration.

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 17:34:56 +01:00
Arnaud Patard
7fdc7849d2 [ARM] 4359/3: H1940: Add bluetooth support
This patch adds a small driver responsible for configuring the UART used
for the bluetooth chip and for enabling the bluetooth chipset.
Additionnaly, can trigger a led if the H1940 led driver is enabled.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 17:19:37 +01:00
Ben Dooks
c6184e271d [ARM] 4214/2: S3C2410: Add Armzone QT2410
Patch from: Harald Welte <laforge@openmoko.org>

Add support for the Armzone QT2410 system, with
basic peripheral support for TFT display, SPI
and LEDs.

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Ben Dooks <ben-linux@fluf.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17 11:17:42 +00:00
Ben Dooks
a21765a70e [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components
The following patch and script moves the arch/arm/mach-s3c2410
directory into arch/arm/plat-s3c24xx for the generic core code
and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files

Include directory include/asm-arm/plat-s3c24xx is added for the
core include files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 17:36:09 +00:00
Ben Dooks
d19494b187 [ARM] 4156/1: S3C24XX: Add CONFIG_S3C2410_GPIO
In preperation for splitting the arch-s3c2410 directory
up, add a CONFIG_S3C2410_GPIO instead of implicitly
making the .o for CONFIG_CPU_S3C2410 and CONFIG_CPU_S3C2440

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:54:33 +00:00
Ben Dooks
4c784ef76a [ARM] 4155/1: S3C24XX: remove obj-dma-* from Makefile
In preperation for splitting the arch-s3c2410 directory
up, remove the use of obj-dma-y in the Makefile and move
to using CONFIG_S3C2440_DMA, CONFIG_S3C2412_DMA, etc.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:54:32 +00:00
Ben Dooks
bbf6f2809d [ARM] 3999/1: RX3715: suspend to RAM support
The RX3715 is similar to the H1940 in the way
that suspend to RAM works, so we can use most
of the extant support for the H1940 with only
a few modifictions

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07 22:37:44 +00:00
Ben Dooks
9073341c2b [ARM] 3986/1: H1940: suspend to RAM support
Add support to suspend and resume, using the
H1940's bootloader

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07 16:17:49 +00:00
Ben Dooks
4b053e7a32 [ARM] 3858/1: S3C2412: power management code
Add S3C2412 power management code, and move the
core register saving in from s3c2412.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 09:35:04 +01:00
David Anders
da56c94926 [ARM] 3854/2: S3C2410 - add machine type for AML M5900 series (resubmitted)
Add the AML M5900 series to the list of supported machines in the
arch/arm/mach-s3c2410 directory. This ensures the core peripherals
are registered, and the timer source is configured. if selected in
the kernel config the framebuffer registers and mtd partition
information are set.  This version of the patch has corrected
formatting and removed the legacy procfs directory entry.

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 09:35:03 +01:00
Ben Dooks
b6c440a98e [ARM] 3840/1: S3C2412: Add machine VSTMS
Add new machine VSTMS

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:33:54 +01:00
Ben Dooks
0033a2f0d0 [ARM] 3803/2: S3C24XX: PM split S3C2410 out of core pm
Remove the S3C2410 specific items out of the
core PM code. Add sysdev driver for all the
S3C24XX series that used the S3C2410 PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:30 +01:00
Ben Dooks
34348012d6 [ARM] 3800/2: S3C2412: DMA channel mappings
DMA channel mappings for the S3C2312

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:29 +01:00
Ben Dooks
1e582fc737 [ARM] 3801/1: S3C24XX: Move IRQ PM out of pm.c
Seperate the IRQ power management code out of
the pm.c file, and add it to the relevant
system class devices.

Also make the suspend and resume code take
notice of the fact these registers can be
moved by compile time code.

Add fix from Ilya Yanok to also save the
INTSUBMSK over sleep.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:20 +01:00
Ben Dooks
3fc3a25ba4 [ARM] 3799/1: S3C2442: DMA channel mappings
DMA channel mappings for the S3C2442

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:19 +01:00
Ben Dooks
98c418a002 [ARM] 3798/1: S3C2440: DMA channel mappings
S3C2440 DMA channel mappings

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:18 +01:00
Ben Dooks
c374fe7148 [ARM] 3797/1: S3C2410: DMA channel mappings
DMA channel mappings for the S3C2410

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:16 +01:00
Ben Dooks
505788cccb [ARM] 3796/1: S3C24XX: Add per-cpu DMA channel mapper
Allow each CPU type in the S3C24XX range to
select the DMA channel mapping it supports.

We change the DMA registration to use an
virtual channel number that the DMA system
will allocate to a hardware channel at
request time.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:15 +01:00
Ben Dooks
c6e58ebb37 [ARM] 3783/1: S3C2412: fix IRQ_EINT0 to IRQ_EINT3 handling
Patch from Ben Dooks

The IRQ_EINT0 through IRQ_EINT3 handling has changed
on the S3C2412 from the previous SoCs in the range,
and thus we need to add code to handle this.

The changes come about due to these IRQs being
displayed in two different registers, and needing to
be acked and masked in both.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-09 21:24:13 +01:00
Ben Dooks
332158e7c2 [ARM] 3754/1: S3C24XX: tidy arch/arm/mach-s3c2410/Makefile
Patch from Ben Dooks

tidy up the makefile by using TABs to indent, and ensure
that all items are indented the same.

Move the DMA to its own section, ready for the next set
of updates

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-18 15:32:12 +01:00
Ben Dooks
66c594098d [ARM] 3642/1: S3C24XX: Add machine SMDK2413
Patch from Ben Dooks

Add basic support for the Samsung/Aiji SMDK2413

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:35 +01:00
Ben Dooks
736855f0c7 [ARM] 3638/1: S3C2412: core clocks
Patch from Ben Dooks

Clock support for the clocks on the Samsung S3C2412
and S3C2413 SoCs. This provides clock enables and
parent selection for all the standard clocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:31 +01:00
Ben Dooks
68d9ab394f [ARM] 3635/1: S3C24XX: Add S3C2412 core cpu support
Patch from Ben Dooks

Add support for the Samsung S3C2412 and S3C2413 range
of SoCs. This patch contains the core identification,
debug macros, and basic register updates to get these
to build.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:27 +01:00
Ben Dooks
99c13853ff [ARM] 3627/1: S3C24XX: split s3c2410 clocks from core clocks
Patch from Ben Dooks

Split the s3c2410 specific clocks from the core
clock code, as part of the work to support more
of the Samsung line of SoCs.

The patch does not use the sysdev mechanism as
the clocks are needed for the timer init, which
is very early in the kernel init sequence.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:18:20 +01:00
Ben Dooks
96ce2385dd [ARM] 3559/1: S3C2442: core and serial port
Patch from Ben Dooks

Core support for the Samsung S3C2442, and the
serial port driver update to allow the serial
port blocks to be used.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18 23:06:41 +01:00
Ben Dooks
d3f4c571b6 [ARM] 3440/1: [S3C2410] make SMDK2410 and SMDK2440 similarities common
Patch from Ben Dooks

The SMDK2410 and SMDK2440 boards have a number of items
in common, including the LEDs, Ethernet, PCMCIA. Make
a common SMDK support file.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01 18:33:42 +01:00
Ben Dooks
110d322b29 [ARM] 3327/1: S3C2410 - add osiris machine support
Patch from Ben Dooks

Support for Simtec IM2440D20 CPU modules (Osiris)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:00 +00:00
Lucas Correia Villa Real
0ca5bc3de7 [ARM] 3284/1: S3C2400 - adds support to GPIO
Patch from Lucas Correia Villa Real

This patch adds support to GPIO on the S3C2400, which is going to
be used by the GP32 machine and the SMDK2400 development board.

Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-01 21:24:23 +00:00
Ben Dooks
bafa49cc1b [ARM] 2884/1: BAST - fix PC104 IRQ routing
Patch from Ben Dooks

This has been broken for a while now, so fix the
problems with the code, test and bring up to date.
This also makes the code conditional on an
Kconfig option

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07 17:24:48 +01:00
Ben Dooks
7efb833d64 [ARM] 2889/1: S3C2410 - Add machine Anubis
Patch from Ben Dooks

Add the Simtec Anubis to the list of supported
machines in the arch/arm/mach-s3c2410 directory.
This ensures the core peripherals are registered,
the timer source is configured and the correct
power-management is enabled.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07 11:49:23 +01:00
Ben Dooks
a8d11e3d02 [PATCH] ARM: 2831/1: S3C2440 - split s3c2440 clocks from central clock code
Patch from Ben Dooks

Split the s3c2440 specific clocks from the arch clock support, to
make the code clearer.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-26 22:39:14 +01:00
Ben Dooks
7fcc113c30 [PATCH] ARM: 2829/1: S3C2410 - split s3c2440 irq specifics from core irq.c
Patch from Ben Dooks

Remove the need for the #ifdefs and place the IRQ handling code for
the s3c2440 into a new file, which is only compiled when the
s3c2440 cpu support is enabled.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-26 19:20:27 +01:00
Ben Dooks
f705b1aed7 [PATCH] ARM: 2764/1: S3C24XX - Common PM functions for Simtec boards
Patch from Ben Dooks

All current S3C24XX implementations from Simtec share the same
requirements for suspend/resume information.
This patch moves the save code out of the mach-bast.c file,
and into it's own so it can be shared by all the current
Simtec S3C24XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 11:09:15 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00