Retreives connection tracking zone, mark, label, and state from
a SKB.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow sending a packet to conntrack module for connection tracking.
The packet will be marked with conntrack connection's state, and
any metadata such as conntrack mark and label. This state metadata
can later be matched against with tc classifers, for example with the
flower classifier as below.
In addition to committing new connections the user can optionally
specific a zone to track within, set a mark/label and configure nat
with an address range and port range.
Usage is as follows:
$ tc qdisc add dev ens1f0_0 ingress
$ tc qdisc add dev ens1f0_1 ingress
$ tc filter add dev ens1f0_0 ingress \
prio 1 chain 0 proto ip \
flower ip_proto tcp ct_state -trk \
action ct zone 2 pipe \
action goto chain 2
$ tc filter add dev ens1f0_0 ingress \
prio 1 chain 2 proto ip \
flower ct_state +trk+new \
action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \
action mirred egress redirect dev ens1f0_1
$ tc filter add dev ens1f0_0 ingress \
prio 1 chain 2 proto ip \
flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \
action ct nat pipe \
action mirred egress redirect dev ens1f0_1
$ tc filter add dev ens1f0_1 ingress \
prio 1 chain 0 proto ip \
flower ip_proto tcp ct_state -trk \
action ct zone 2 pipe \
action goto chain 1
$ tc filter add dev ens1f0_1 ingress \
prio 1 chain 1 proto ip \
flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \
action ct nat pipe \
action mirred egress redirect dev ens1f0_0
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Changelog:
V5->V6:
Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case
V4->V5:
Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached()
V3->V4:
Added strict_start_type for act_ct policy
V2->V3:
Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c
V1->V2:
Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max
Refactored NAT_PORT_MIN_MAX range handling as well
Added ipv4/ipv6 defragmentation
Removed extra skb pull push of nw offset in exectute nat
Refactored tcf_ct_skb_network_trim after pull
Removed TCA_ACT_CT define
Signed-off-by: David S. Miller <davem@davemloft.net>
In an eswitch, PCI VF may have port which is normally represented using
a representor netdevice.
To have better visibility of eswitch port, its association with VF,
and its representor netdevice, introduce a PCI VF port flavour.
When devlink port flavour is PCI VF, fill up PCI VF attributes of
the port.
Extend port name creation using PCI PF and VF number scheme on best
effort basis, so that vendor drivers can skip defining their own scheme.
$ devlink port show
pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0
pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0
pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In an eswitch, PCI PF may have port which is normally represented
using a representor netdevice.
To have better visibility of eswitch port, its association with
PF and a representor netdevice, introduce a PCI PF port
flavour and port attriute.
When devlink port flavour is PCI PF, fill up PCI PF attributes of the
port.
Extend port name creation using PCI PF number on best effort basis.
So that vendor drivers can skip defining their own scheme.
$ devlink port show
pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Physical port number and split group fields are applicable only to
physical port flavours such as PHYSICAL, CPU and DSA.
Hence limit returning those values in netlink response to such port
flavours.
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To support additional devlink port flavours and to support few common
and few different port attributes, move physical port attributes to a
different structure.
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXRozKAAKCRBiEGxRG/Sl
25okAP9I0Rmscpqjb/+GEeXH4EmL3moGzc9o/BzHRqfeO4wqYAEA+8f7L20xHe8g
tvEGfP7mN/oBmcAfqgH5K9F4eJsBRAw=
=NkCn
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
- Add a new LED common module for ti-lmu driver family
- Modify MFD ti-lmu bindings
- add ti,brightness-resolution
- add the ramp up/down property
- Add regulator support for LM36274 driver to lm363x-regulator.c
- New LED class drivers with DT bindings:
- leds-spi-byte
- leds-lm36274
- leds-lm3697 (move the support from MFD to LED subsystem)
- Simplify getting the I2C adapter of a client:
- leds-tca6507
- leds-pca955x
- Convert LED documentation to ReST
* tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt
docs: leds: convert to ReST
leds: leds-tca6507: simplify getting the adapter of a client
leds: leds-pca955x: simplify getting the adapter of a client
leds: lm36274: Introduce the TI LM36274 LED driver
dt-bindings: leds: Add LED bindings for the LM36274
regulator: lm363x: Add support for LM36274
mfd: ti-lmu: Add LM36274 support to the ti-lmu
dt-bindings: mfd: Add lm36274 bindings to ti-lmu
leds: max77650: Remove set but not used variable 'parent'
leds: avoid flush_work in atomic context
leds: lm3697: Introduce the lm3697 driver
mfd: ti-lmu: Remove support for LM3697
dt-bindings: ti-lmu: Modify dt bindings for the LM3697
leds: TI LMU: Add common code for TI LMU devices
leds: spi-byte: add single byte SPI LED driver
dt-bindings: leds: Add binding for spi-byte LED.
dt-bindings: mfd: LMU: Add ti,brightness-resolution
dt-bindings: mfd: LMU: Add the ramp up/down property
Adapt and apply changes that were made to the TCP socket connect
code. See the following commits for details on the purpose of
these changes:
Commit 7196dbb02e ("SUNRPC: Allow changing of the TCP timeout parameters on the fly")
Commit 3851f1cdb2 ("SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout")
Commit 02910177ae ("SUNRPC: Fix reconnection timeouts")
Some common transport code is moved to xprt.c to satisfy the code
duplication police.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
There is only one remaining function, rpcrdma_buffer_put(), that
uses this field. Its caller can supply a pointer to the correct
rpcrdma_buffer, enabling the removal of an 8-byte pointer field
from a frequently-allocated shared data structure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Move the "not present" case into the individual chunk encoders. This
improves code organization and readability.
The reason for the original organization was to optimize for the
case where there there are no chunks. The optimization turned out to
be inconsequential, so let's err on the side of code readability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rb_lock is contended between rpcrdma_buffer_create,
rpcrdma_buffer_put, and rpcrdma_post_recvs.
Commit e340c2d6ef ("xprtrdma: Reduce the doorbell rate (Receive)")
causes rpcrdma_post_recvs to take the rb_lock repeatedly when it
determines more Receives are needed. Streamline this code path so
it takes the lock just once in most cases to build the Receive
chain that is about to be posted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Commit 7c8d9e7c88 ("xprtrdma: Move Receive posting to Receive
handler") reduced the number of rpcrdma_rep_create call sites to
one. After that commit, the backchannel code no longer invokes it.
Therefore the free list logic added by commit d698c4a02e
("xprtrdma: Fix backchannel allocation of extra rpcrdma_reps") is
no longer necessary, and in fact adds some extra overhead that we
can do without.
Simply post any newly created reps. They will get added back to
the rb_recv_bufs list when they subsequently complete.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Eliminate a context switch in the path that handles RPC wake-ups
when a Receive completion has to wait for a Send completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit ba69cd122e ("xprtrdma: Remove support for FMR memory
registration"), FRWR is the only supported memory registration mode.
We can take advantage of the asynchronous nature of FRWR's LOCAL_INV
Work Requests to get rid of the completion wait by having the
LOCAL_INV completion handler take care of DMA unmapping MRs and
waking the upper layer RPC waiter.
This eliminates two context switches when local invalidation is
necessary. As a side benefit, we will no longer need the per-xprt
deferred completion work queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When a marshal operation fails, any MRs that were already set up for
that request are recycled. Recycling releases MRs and creates new
ones, which is expensive.
Since commit f287762308 ("xprtrdma: Chain Send to FastReg WRs")
was merged, recycling FRWRs is unnecessary. This is because before
that commit, frwr_map had already posted FAST_REG Work Requests,
so ownership of the MRs had already been passed to the NIC and thus
dealing with them had to be delayed until they completed.
Since that commit, however, FAST_REG WRs are posted at the same time
as the Send WR. This means that if marshaling fails, we are certain
the MRs are safe to simply unmap and place back on the free list
because neither the Send nor the FAST_REG WRs have been posted yet.
The kernel still has ownership of the MRs at this point.
This reduces the total number of MRs that the xprt has to create
under heavy workloads and makes the marshaling logic less brittle.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Now that both the Send and Receive completions are handled in
process context, it is safe to DMA unmap and return MRs to the
free or recycle lists directly in the completion handlers.
Doing this means rpcrdma_frwr no longer needs to track the state of
each MR, meaning that a VALID or FLUSHED MR can no longer appear on
an xprt's MR free list. Thus there is no longer a need to track the
MR's registration state in rpcrdma_frwr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 9590d083c1 ("xprtrdma: Use xprt_pin_rqst in
rpcrdma_reply_handler") pins incoming RPC/RDMA replies so they
can be left in the pending requests queue while they are being
processed without introducing a race between ->buf_free and the
transport's reply handler. Therefore RPCRDMA_REQ_F_PENDING is no
longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Under high I/O workloads, I've noticed that an RPC/RDMA transport
occasionally deadlocks (IOPS goes to zero, and doesn't recover).
Diagnosis shows that the sendctx queue is empty, but when sendctxs
are returned to the queue, the xprt_write_space wake-up never
occurs. The wake-up logic in rpcrdma_sendctx_put_locked is racy.
I noticed that both EMPTY_SCQ and XPRT_WRITE_SPACE are implemented
via an atomic bit. Just one of those is sufficient. Removing
EMPTY_SCQ in favor of the generic bit mechanism makes the deadlock
un-reproducible.
Without EMPTY_SCQ, rpcrdma_buffer::rb_flags is no longer used and
is therefore removed.
Unfortunately this patch does not apply cleanly to stable. If
needed, someone will have to port it and test it.
Fixes: 2fad659209 ("xprtrdma: Wait on empty sendctx queue")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This is a latent bug. xdr_stream_pos works by subtracting
xdr_stream::nwords from xdr_buf::len. But xdr_stream::nwords is not
initialized by xdr_init_encode().
It works today only because all fields in rpcrdma_req::rl_stream
are initialized to zero by rpcrdma_req_create, making the
subtraction in xdr_stream_pos always a no-op.
I found this issue via code inspection. It was introduced by commit
39f4cd9e99 ("xprtrdma: Harden chunk list encoding against send
buffer overflow"), but the code has changed enough since then that
this fix can't be automatically applied to stable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 5.3:
API:
- Test shash interface directly in testmgr
- cra_driver_name is now mandatory
Algorithms:
- Replace arc4 crypto_cipher with library helper
- Implement 5 way interleave for ECB, CBC and CTR on arm64
- Add xxhash
- Add continuous self-test on noise source to drbg
- Update jitter RNG
Drivers:
- Add support for SHA204A random number generator
- Add support for 7211 in iproc-rng200
- Fix fuzz test failures in inside-secure
- Fix fuzz test failures in talitos
- Fix fuzz test failures in qat"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
crypto: stm32/hash - remove interruptible condition for dma
crypto: stm32/hash - Fix hmac issue more than 256 bytes
crypto: stm32/crc32 - rename driver file
crypto: amcc - remove memset after dma_alloc_coherent
crypto: ccp - Switch to SPDX license identifiers
crypto: ccp - Validate the the error value used to index error messages
crypto: doc - Fix formatting of new crypto engine content
crypto: doc - Add parameter documentation
crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
crypto: arm64/aes-ce - add 5 way interleave routines
crypto: talitos - drop icv_ool
crypto: talitos - fix hash on SEC1.
crypto: talitos - move struct talitos_edesc into talitos.h
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
crypto: asymmetric_keys - select CRYPTO_HASH where needed
crypto: serpent - mark __serpent_setkey_sbox noinline
crypto: testmgr - dynamically allocate crypto_shash
crypto: testmgr - dynamically allocate testvec_config
crypto: talitos - eliminate unneeded 'done' functions at build time
...
netem runs skb_orphan_partial() which "disconnects" the skb
from normal TCP write memory accounting. We should not adjust
sk->sk_wmem_alloc on the fallback path for such skbs.
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Turns out TLS_TX in HW offload mode does not initialize tls_prot_info.
Since commit 9cd81988cc ("net/tls: use version from prot") we actually
use this field on the datapath. Luckily we always compare it to TLS 1.3,
and assume 1.2 otherwise. So since zero is not equal to 1.3, everything
worked fine.
Fixes: 9cd81988cc ("net/tls: use version from prot")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a return code for the tls_dev_resync callback.
When the driver TX resync fails, kernel can retry the resync again
until it succeeds. This prevents drivers from attempting to offload
TLS packets if the connection is known to be out of sync.
We don't worry about the RX resync since they will be retried naturally
as more encrypted records get received.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_bind_addr_state() is called either in packet rcv path or
by sctp_copy_local_addr_list(), which are under rcu_read_lock.
So there's no need to call it again in sctp_bind_addr_state().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like other endpoint features, strm_interleave should be moved to
sctp_endpoint and renamed to intl_enable.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To keep consistent with other asoc features, we move intl_enable
to peer.intl_capable in asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like reconf_enable, prsctp_enable should also be removed from asoc,
as asoc->peer.prsctp_capable has taken its job.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
asoc's reconf support is actually decided by the 4-shakehand negotiation,
not something that users can set by sockopt. asoc->peer.reconf_capable is
working for this. So remove it from asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=E3bF
-----END PGP SIGNATURE-----
Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring ACL support from David Howells:
"This changes the permissions model used by keys and keyrings to be
based on an internal ACL by the following means:
- Replace the permissions mask internally with an ACL that contains a
list of ACEs, each with a specific subject with a permissions mask.
Potted default ACLs are available for new keys and keyrings.
ACE subjects can be macroised to indicate the UID and GID specified
on the key (which remain). Future commits will be able to add
additional subject types, such as specific UIDs or domain
tags/namespaces.
Also split a number of permissions to give finer control. Examples
include splitting the revocation permit from the change-attributes
permit, thereby allowing someone to be granted permission to revoke
a key without allowing them to change the owner; also the ability
to join a keyring is split from the ability to link to it, thereby
stopping a process accessing a keyring by joining it and thus
acquiring use of possessor permits.
- Provide a keyctl to allow the granting or denial of one or more
permits to a specific subject. Direct access to the ACL is not
granted, and the ACL cannot be viewed"
* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Provide KEYCTL_GRANT_PERMISSION
keys: Replace uid/gid/perm permissions checking with an ACL
Currently, TC offers the ability to match on the MPLS fields of a packet
through the use of the flow_dissector_key_mpls struct. However, as yet, TC
actions do not allow the modification or manipulation of such fields.
Add a new module that registers TC action ops to allow manipulation of
MPLS. This includes the ability to push and pop headers as well as modify
the contents of new or existing headers. A further action to decrement the
TTL field of an MPLS header is also provided with a new helper added to
support this.
Examples of the usage of the new action with flower rules to push and pop
MPLS labels are:
tc filter add dev eth0 protocol ip parent ffff: flower \
action mpls push protocol mpls_uc label 123 \
action mirred egress redirect dev eth1
tc filter add dev eth0 protocol mpls_uc parent ffff: flower \
action mpls pop protocol ipv4 \
action mirred egress redirect dev eth1
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Open vSwitch allows the updating of an existing MPLS header on a packet.
In preparation for supporting similar functionality in TC, move this to a
common skb helper function.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Open vSwitch provides code to pop an MPLS header to a packet. In
preparation for supporting this in TC, move the pop code to an skb helper
that can be reused.
Remove the, now unused, update_ethertype static function from OvS.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Open vSwitch provides code to push an MPLS header to a packet. In
preparation for supporting this in TC, move the push code to an skb helper
that can be reused.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_warn_bad_offload and netdev_rx_csum_fault trigger on hard to debug
issues. Dump more state and the header.
Optionally dump the entire packet and linear segment. This is required
to debug checksum bugs that may include bytes past skb_tail_pointer().
Both call sites call this function inside a net_ratelimit() block.
Limit full packet log further to a hard limit of can_dump_full (5).
Based on an earlier patch by Cong Wang, see link below.
Changes v1 -> v2
- dump frag_list only on full_pkt
Link: https://patchwork.ozlabs.org/patch/1000841/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Processes can request ipv6 flowlabels with cmsg IPV6_FLOWINFO.
If not set, by default an autogenerated flowlabel is selected.
Explicit flowlabels require a control operation per label plus a
datapath check on every connection (every datagram if unconnected).
This is particularly expensive on unconnected sockets multiplexing
many flows, such as QUIC.
In the common case, where no lease is exclusive, the check can be
safely elided, as both lease request and check trivially succeed.
Indeed, autoflowlabel does the same even with exclusive leases.
Elide the check if no process has requested an exclusive lease.
fl6_sock_lookup previously returns either a reference to a lease or
NULL to denote failure. Modify to return a real error and update
all callers. On return NULL, they can use the label and will elide
the atomic_dec in fl6_sock_release.
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Changes RFC->v1:
- use static_key_false_deferred to rate limit jump label operations
- call static_key_deferred_flush to stop timers on exit
- move decrement out of RCU context
- defer optimization also if opt data is associated with a lease
- updated all fp6_sock_lookup callers, not just udp
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=Push
-----END PGP SIGNATURE-----
Merge tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring namespacing from David Howells:
"These patches help make keys and keyrings more namespace aware.
Firstly some miscellaneous patches to make the process easier:
- Simplify key index_key handling so that the word-sized chunks
assoc_array requires don't have to be shifted about, making it
easier to add more bits into the key.
- Cache the hash value in the key so that we don't have to calculate
on every key we examine during a search (it involves a bunch of
multiplications).
- Allow keying_search() to search non-recursively.
Then the main patches:
- Make it so that keyring names are per-user_namespace from the point
of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not
accessible cross-user_namespace.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this.
- Move the user and user-session keyrings to the user_namespace
rather than the user_struct. This prevents them propagating
directly across user_namespaces boundaries (ie. the KEY_SPEC_*
flags will only pick from the current user_namespace).
- Make it possible to include the target namespace in which the key
shall operate in the index_key. This will allow the possibility of
multiple keys with the same description, but different target
domains to be held in the same keyring.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this.
- Make it so that keys are implicitly invalidated by removal of a
domain tag, causing them to be garbage collected.
- Institute a network namespace domain tag that allows keys to be
differentiated by the network namespace in which they operate. New
keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned
the network domain in force when they are created.
- Make it so that the desired network namespace can be handed down
into the request_key() mechanism. This allows AFS, NFS, etc. to
request keys specific to the network namespace of the superblock.
This also means that the keys in the DNS record cache are
thenceforth namespaced, provided network filesystems pass the
appropriate network namespace down into dns_query().
For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other
cache keyrings, such as idmapper keyrings, also need to set the
domain tag - for which they need access to the network namespace of
the superblock"
* tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Pass the network namespace into request_key mechanism
keys: Network namespace domain tag
keys: Garbage collect keys for which the domain has been removed
keys: Include target namespace in match criteria
keys: Move the user and user-session keyrings to the user_namespace
keys: Namespace keyring names
keys: Add a 'recurse' flag for keyring searches
keys: Cache the hash value to avoid lots of recalculation
keys: Simplify key description management
If an app is playing tricks to reuse a socket via tcp_disconnect(),
bytes_acked/received needs to be reset to 0. Otherwise tcp_info will
report the sum of the current and the old connection..
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 0df48c26d8 ("tcp: add tcpi_bytes_acked to tcp_info")
Fixes: bdd1f9edac ("tcp: add tcpi_bytes_received to tcp_info")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
socket->wq is assign-once, set when we are initializing both
struct socket it's in and struct socket_wq it points to. As the
matter of fact, the only reason for separate allocation was the
ability to RCU-delay freeing of socket_wq. RCU-delaying the
freeing of socket itself gets rid of that need, so we can just
fold struct socket_wq into the end of struct socket and simplify
the life both for sock_alloc_inode() (one allocation instead of
two) and for tun/tap oddballs, where we used to embed struct socket
and struct socket_wq into the same structure (now - embedding just
the struct socket).
Note that reference to struct socket_wq in struct sock does remain
a reference - that's unchanged.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
we do have an RCU-delayed part there already (freeing the wq),
so it's not like the pipe situation; moreover, it might be
worth considering coallocating wq with the rest of struct sock_alloc.
->sk_wq in struct sock would remain a pointer as it is, but
the object it normally points to would be coallocated with
struct socket...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-07-09
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Lots of libbpf improvements: i) addition of new APIs to attach BPF
programs to tracing entities such as {k,u}probes or tracepoints,
ii) improve specification of BTF-defined maps by eliminating the
need for data initialization for some of the members, iii) addition
of a high-level API for setting up and polling perf buffers for
BPF event output helpers, all from Andrii.
2) Add "prog run" subcommand to bpftool in order to test-run programs
through the kernel testing infrastructure of BPF, from Quentin.
3) Improve verifier for BPF sockaddr programs to support 8-byte stores
for user_ip6 and msg_src_ip6 members given clang tends to generate
such stores, from Stanislav.
4) Enable the new BPF JIT zero-extension optimization for further
riscv64 ALU ops, from Luke.
5) Fix a bpftool json JIT dump crash on powerpc, from Jiri.
6) Fix an AF_XDP race in generic XDP's receive path, from Ilya.
7) Various smaller fixes from Ilya, Yue and Arnd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike driver mode, generic xdp receive could be triggered
by different threads on different CPU cores at the same time
leading to the fill and rx queue breakage. For example, this
could happen while sending packets from two processes to the
first interface of veth pair while the second part of it is
open with AF_XDP socket.
Need to take a lock for each generic receive to avoid race.
Fixes: c497176cb2 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make the same support as commit 363887a2cd ("ipv4: Support multipath
hashing on inner IP pkts for GRE tunnel") for outer IPv6. The hashing
considers both IPv4 and IPv6 pkts when they are tunneled by IPv6 GRE.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 363887a2cd ("ipv4: Support multipath hashing on inner IP pkts
for GRE tunnel") supports multipath policy value of 2, Layer 3 or inner
Layer 3 if present, but it only considers inner IPv4. There is a use
case of IPv6 is tunneled by IPv4 GRE, thus add the ability to hash on
inner IPv6 addresses.
Fixes: 363887a2cd ("ipv4: Support multipath hashing on inner IP pkts for GRE tunnel")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function cache_seq_next is declared static and marked
EXPORT_SYMBOL_GPL, which is at best an odd combination. Because the
function is not used outside of the net/sunrpc/cache.c file it is
defined in, this commit removes the EXPORT_SYMBOL_GPL() marking.
Fixes: d48cf356a1 ("SUNRPC: Remove non-RCU protected lookup")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use netif_ovs_is_port() function instead of open code.
This patch doesn't change logic.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves the flush of works after vdev->config->del_vqs(vdev),
because we need to be sure that no workers run before to free the
'vsock' object.
Since we stopped the workers using the [tx|rx|event]_run flags,
we are sure no one is accessing the device while we are calling
vdev->config->reset(vdev), so we can safely move the workers' flush.
Before the vdev->config->del_vqs(vdev), workers can be scheduled
by VQ callbacks, so we must flush them after del_vqs(), to avoid
use-after-free of 'vsock' object.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before to call vdev->config->reset(vdev) we need to be sure that
no one is accessing the device, for this reason, we add new variables
in the struct virtio_vsock to stop the workers during the .remove().
This patch also add few comments before vdev->config->reset(vdev)
and vdev->config->del_vqs(vdev).
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some callbacks used by the upper layers can run while we are in the
.remove(). A potential use-after-free can happen, because we free
the_virtio_vsock without knowing if the callbacks are over or not.
To solve this issue we move the assignment of the_virtio_vsock at the
end of .probe(), when we finished all the initialization, and at the
beginning of .remove(), before to release resources.
For the same reason, we do the same also for the vdev->priv.
We use RCU to be sure that all callbacks that use the_virtio_vsock
ended before freeing it. This is not required for callbacks that
use vdev->priv, because after the vdev->config->del_vqs() we are sure
that they are ended and will no longer be invoked.
We also take the mutex during the .remove() to avoid that .probe() can
run while we are resetting the device.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper recently removed page_pool_destroy() (from driver invocation)
and moved shutdown and free of page_pool into xdp_rxq_info_unreg(),
in-order to handle in-flight packets/pages. This created an asymmetry
in drivers create/destroy pairs.
This patch reintroduce page_pool_destroy and add page_pool user
refcnt. This serves the purpose to simplify drivers error handling as
driver now drivers always calls page_pool_destroy() and don't need to
track if xdp_rxq_info_reg_mem_model() was unsuccessful.
This could be used for a special cases where a single RX-queue (with a
single page_pool) provides packets for two net_device'es, and thus
needs to register the same page_pool twice with two xdp_rxq_info
structures.
This patch is primarily to ease API usage for drivers. The recently
merged netsec driver, actually have a bug in this area, which is
solved by this API change.
This patch is a modified version of Ivan Khoronzhuk's original patch.
Link: https://lore.kernel.org/netdev/20190625175948.24771-2-ivan.khoronzhuk@linaro.org/
Fixes: 5c67bf0ec4 ("net: netsec: Use page_pool API")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The frags_q is not properly initialized, it may result in illegal memory
access when conn_info is NULL.
The "goto free_exit" should be replaced by "goto exit".
Signed-off-by: Yang Wei <albin_yang@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Move bridge keys in nft_meta to nft_meta_bridge, from wenxu.
2) Support for bridge pvid matching, from wenxu.
3) Support for bridge vlan protocol matching, also from wenxu.
4) Add br_vlan_get_pvid_rcu(), to fetch the bridge port pvid
from packet path.
5) Prefer specific family extension in nf_tables.
6) Autoload specific family extension in case it is missing.
7) Add synproxy support to nf_tables, from Fernando Fernandez Mancera.
8) Support for GRE encapsulation in IPVS, from Vadim Fedorenko.
9) ICMP handling for GRE encapsulation, from Julian Anastasov.
10) Remove unused parameter in nf_queue, from Florian Westphal.
11) Replace seq_printf() by seq_puts() in nf_log, from Markus Elfring.
12) Rename nf_SYNPROXY.h => nf_synproxy.h before this header becomes
public.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit cd17d77705 ("bpf/tools: sync bpf.h") clang decided
that it can do a single u64 store into user_ip6[2] instead of two
separate u32 ones:
# 17: (18) r2 = 0x100000000000000
# ; ctx->user_ip6[2] = bpf_htonl(DST_REWRITE_IP6_2);
# 19: (7b) *(u64 *)(r1 +16) = r2
# invalid bpf_context access off=16 size=8
>From the compiler point of view it does look like a correct thing
to do, so let's support it on the kernel side.
Credit to Andrii Nakryiko for a proper implementation of
bpf_ctx_wide_store_ok.
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: cd17d77705 ("bpf/tools: sync bpf.h")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Speed up reads, discards and zeroouts through RBD_OBJ_FLAG_MAY_EXIST
and RBD_OBJ_FLAG_NOOP_FOR_NONEXISTENT based on object map.
Invalid object maps are not trusted, but still updated. Note that we
never iterate, resize or invalidate object maps. If object-map feature
is enabled but object map fails to load, we just fail the requester
(either "rbd map" or I/O, by way of post-acquire action).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We already have one exported wrapper around it for extent.osd_data and
rbd_object_map_update_finish() needs another one for cls.request_data.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This will be used for loading object map. rbd_obj_read_sync() isn't
suitable because object map must be accessed through class methods.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This list item remained from when we had safe and unsafe replies
(commit vs ack). It has since become a private list item for use by
clients.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
...ditto for the decode function. We only use these functions to fix
up banner addresses now, so let's name them more appropriately.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Going forward, we'll have different address types so let's use
the addr2 TYPE_LEGACY for internal tracking rather than TYPE_NONE.
Also, make ceph_pr_addr print the address type value as well.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Given the new format, we have to decode the addresses twice. Once to
skip past the new_up_client field, and a second time to collect the
addresses.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
While we're in there, let's also fix up the decoder to do proper
bounds checking.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Switch the MonMap decoder to use the new decoding routine for
entity_addr_t's.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add a function for decoding an entity_addr_t. Once
CEPH_FEATURE_MSG_ADDR2 is enabled, the server daemons will start
encoding entity_addr_t differently.
Add a new helper function that can handle either format.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It doesn't make sense to leave it undecoded until later.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This function is entirely unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
bpfilter_umh currently printed all messages to /dev/console and this
might interfere the user activity(*).
This commit changes the output device to /dev/kmsg so that the messages
from bpfilter_umh won't show on the console directly.
(*) https://bugzilla.suse.com/show_bug.cgi?id=1140221
Signed-off-by: Gary Lin <glin@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David reports that RPC applications which use epoll() occasionally
get stuck, and that TLS ULP causes the kernel to not wake applications,
even though read() will return data.
This is indeed true. The ctx->rx_list which holds partially copied
records is not consulted when deciding whether socket is readable.
Note that SO_RCVLOWAT with epoll() is and has always been broken for
kernel TLS. We'd need to parse all records from the TCP layer, instead
of just the first one.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For these places are protected by rcu_read_lock, we change from
rcu_dereference_rtnl to rcu_dereference, as there is no need to
check if rtnl lock is held.
For these places are protected by rtnl_lock, we change from
rcu_dereference_rtnl to rtnl_dereference/rcu_dereference_protected,
as no extra memory barriers are needed under rtnl_lock() which also
protects tn->bearer_list[] and dev->tipc_ptr/b->media_ptr updating.
rcu_dereference_rtnl will be only used in the places where it could
be under rcu_read_lock or rtnl_lock.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, scripts/cc-can-link.sh is run just for BPFILTER_UMH, but
defining CC_CAN_LINK will be useful in other places.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
BLE based 6LoWPAN networks are highly constrained in bandwidth.
Do not take a short-cut, always check if the destination address is
known to belong to a peer.
As a side-effect this also removes any behavioral differences between
one, and two or more connected peers.
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Like any IPv6 capable device, 6LNs can have multiple addresses assigned
using SLAAC and made known through neighbour advertisements.
After checking the destination address against all peers link-local
addresses, consult the neighbour cache for additional known addresses.
RFC7668 defines the scope of Neighbor Advertisements in Section 3.2.3:
1. "A Bluetooth LE 6LN MUST NOT register its link-local address"
2. "A Bluetooth LE 6LN MUST register its non-link-local addresses with
the 6LBR by sending Neighbor Solicitation (NS) messages ..."
Due to these constranits both the link-local addresses tracked in the
list of 6lowpan peers, and the neighbour cache have to be used when
identifying the 6lowpan peer for a destination address.
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.
For one peer, no checks are performed to see if it is meant to receive
packets for a given address.
As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Ensure last_used is updated before calling mod_timer inside
xprt_schedule_autodisconnect. This avoids a possible xprt_autoclose
firing immediately after a successful connect when xprt_unlock_connect
calls xprt_schedule_autodisconnect with an old value of last_used.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The "CONFIG_" portion is added automatically, so this was being expanded
into "CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES"
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Now that a client can have multiple xprts, we need to add
them all to debugs.
The first one is still "xprt"
Subsequent xprts are "xprt1", "xprt2", etc.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We often see various error conditions with NFS4.x that show up with
a very high operation count all completing with tk_status < 0 in a
short period of time. Add a count to rpc_iostats to record on a
per-op basis the ops that complete in this manner, which will
enable lower overhead diagnostics.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Now that a client can have multiple xprts, we need to
report the statistics for all of them.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Update the printk specifiers inside _print_rpc_iostats to avoid
a checkpatch warning.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For diagnostic purposes, it would be useful to have an rpc_iostats
metric of RPCs completing with tk_status < 0. Unfortunately,
tk_status is reset inside the rpc_call_done functions for each
operation, and the call to tally the per-op metrics comes after
rpc_call_done. Refactor the call to rpc_count_iostat earlier in
rpc_exit_task so we can count these RPCs completing in error.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
With NFSv4.1, different network connections need to be explicitly
bound to a session. During session startup, this is not possible
so only a single connection must be used for session startup.
So add a task flag to disable the default round-robin choice of
connections (when nconnect > 1) and force the use of a single
connection.
Then use that flag on all requests for session management - for
consistence, include NFSv4.0 management (SETCLIENTID) and session
destruction
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add an argument to struct rpc_create_args that allows the specification
of how many transport connections you want to set up to the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For now, just count the queue length. It is less accurate than counting
number of bytes queued, but easier to implement.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Replace the direct task wakeups from inside a softirq context with
wakeups from a process context.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The queue timer function, which walks the RPC queue in order to locate
candidates for waking up is one of the current constraints against
removing the bh-safe queue spin locks. Replace it with a delayed
work queue, so that we can do the actual rpc task wake ups from an
ordinary process context.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Microsoft Surface Precision Mouse provides bogus identity address when
pairing. It connects with Static Random address but provides Public
Address in SMP Identity Address Information PDU. Address has same
value but type is different. Workaround this by dropping IRK if ID
address discrepancy is detected.
> HCI Event: LE Meta Event (0x3e) plen 19
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 75
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: E0:52:33:93:3B:21 (Static)
Connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x00
....
> ACL Data RX: Handle 75 flags 0x02 dlen 12
SMP: Identity Address Information (0x09) len 7
Address type: Public (0x00)
Address: E0:52:33:93:3B:21
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Tested-by: Maarten Fonville <maarten.fonville@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199461
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The spec defines PSM and LE_PSM as different domains so a listen on the
same PSM is valid if the address type points to a different bearer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This makes use of controller sets when using Extended Advertising
feature thus offloading the scheduling to the controller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Problem: The Linux Bluetooth stack yields complete control over the BLE
connection interval to the remote device.
The Linux Bluetooth stack provides access to the BLE connection interval
min and max values through /sys/kernel/debug/bluetooth/hci0/
conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval.
These values are used for initial BLE connections, but the remote device
has the ability to request a connection parameter update. In the event
that the remote side requests to change the connection interval, the Linux
kernel currently only validates that the desired value is within the
acceptable range in the Bluetooth specification (6 - 3200, corresponding to
7.5ms - 4000ms). There is currently no validation that the desired value
requested by the remote device is within the min/max limits specified in
the conn_min_interval/conn_max_interval configurations. This essentially
leads to Linux yielding complete control over the connection interval to
the remote device.
The proposed patch adds a verification step to the connection parameter
update mechanism, ensuring that the desired value is within the min/max
bounds of the current connection. If the desired value is outside of the
current connection min/max values, then the connection parameter update
request is rejected and the negative response is returned to the remote
device. Recall that the initial connection is established using the local
conn_min_interval/conn_max_interval values, so this allows the Linux
administrator to retain control over the BLE connection interval.
The one downside that I see is that the current default Linux values for
conn_min_interval and conn_max_interval typically correspond to 30ms and
50ms respectively. If this change were accepted, then it is feasible that
some devices would no longer be able to negotiate to their desired
connection interval values. This might be remedied by setting the default
Linux conn_min_interval and conn_max_interval values to the widest
supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same
behavior as the current implementation, where the remote device could
request to change the connection interval value to any value that is
permitted by the Bluetooth specification, and Linux would accept the
desired value.
Signed-off-by: Carey Sonsino <csonsino@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Changes made to add HCI Write Authenticated Payload timeout
command for LE Ping feature.
As per the Core Specification 5.0 Volume 2 Part E Section 7.3.94,
the following code changes implements
HCI Write Authenticated Payload timeout command for LE Ping feature.
Signed-off-by: Spoorthi Ravishankar Koppad <spoorthix.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This change is similar to commit a1616a5ac9 ("Bluetooth: hidp: fix
buffer overflow") but for the compat ioctl. We take a string from the
user and forgot to ensure that it's NUL terminated.
I have also changed the strncpy() in to strscpy() in hidp_setup_hid().
The difference is the strncpy() doesn't necessarily NUL terminate the
destination string. Either change would fix the problem but it's nice
to take a belt and suspenders approach and do both.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because we don't care if debugfs works or not, this trickles back a bit
so we can clean things up by making some functions return void instead
of an error value that is never going to fail.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
nft_meta needs to pull in the nft_meta_bridge module in case that this
is a bridge family rule from the select_ops() path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
failures on high-memory machines and fixing the DRC over RDMA.
-----BEGIN PGP SIGNATURE-----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=f2gw
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Two more quick bugfixes for nfsd: fixing a regression causing mount
failures on high-memory machines and fixing the DRC over RDMA"
* tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix overflow causing non-working mounts on 1 TB machines
svcrdma: Ignore source port when computing DRC hash
Both ip_neigh_gw4() and ip_neigh_gw6() can return either a valid pointer
or an error pointer, but the code currently checks that the pointer is
not NULL.
Fix this by checking that the pointer is not an error pointer, as this
can result in a NULL pointer dereference [1]. Specifically, I believe
that what happened is that ip_neigh_gw4() returned '-EINVAL'
(0xffffffffffffffea) to which the offset of 'refcnt' (0x70) was added,
which resulted in the address 0x000000000000005a.
[1]
BUG: KASAN: null-ptr-deref in refcount_inc_not_zero_checked+0x6e/0x180
Read of size 4 at addr 000000000000005a by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.2.0-rc6-custom-reg-179657-gaa32d89 #396
Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017
Call Trace:
<IRQ>
dump_stack+0x73/0xbb
__kasan_report+0x188/0x1ea
kasan_report+0xe/0x20
refcount_inc_not_zero_checked+0x6e/0x180
ipv4_neigh_lookup+0x365/0x12c0
__neigh_update+0x1467/0x22f0
arp_process.constprop.6+0x82e/0x1f00
__netif_receive_skb_one_core+0xee/0x170
process_backlog+0xe3/0x640
net_rx_action+0x755/0xd90
__do_softirq+0x29b/0xae7
irq_exit+0x177/0x1c0
smp_apic_timer_interrupt+0x164/0x5e0
apic_timer_interrupt+0xf/0x20
</IRQ>
Fixes: 5c9f7c1dfc ("ipv4: Add helpers for neigh lookup for nexthop")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hsr_link_ops implements ->newlink() but not ->dellink(),
which leads that resources not released after removing the device,
particularly the entries in self_node_db and node_db.
So add ->dellink() implementation to replace the priv_destructor.
This also makes the code slightly easier to understand.
Reported-by: syzbot+c6167ec3de7def23d1e8@syzkaller.appspotmail.com
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hsr_del_port() should release all the resources allocated
in hsr_add_port().
As a consequence of this change, hsr_for_each_port() is no
longer safe to work with hsr_del_port(), switch to
list_for_each_entry_safe() as we always hold RTNL lock.
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2019-07-05
1) A lot of work to remove indirections from the xfrm code.
From Florian Westphal.
2) Fix a WARN_ON with ipv6 that triggered because of a
forgotten break statement. From Florian Westphal.
3) Remove xfrmi_init_net, it is not needed.
From Li RongQing.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2019-07-05
1) Fix xfrm selector prefix length validation for
inter address family tunneling.
From Anirudh Gupta.
2) Fix a memleak in pfkey.
From Jeremy Sowden.
3) Fix SA selector validation to allow empty selectors again.
From Nicolas Dichtel.
4) Select crypto ciphers for xfrm_algo, this fixes some
randconfig builds. From Arnd Bergmann.
5) Remove a duplicated assignment in xfrm_bydst_resize.
From Cong Wang.
6) Fix a hlist corruption on hash rebuild.
From Florian Westphal.
7) Fix a memory leak when creating xfrm interfaces.
From Nicolas Dichtel.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows you to match on bridge vlan protocol, eg.
nft add rule bridge firewall zones counter meta ibrvproto 0x8100
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This new function allows you to fetch the bridge port vlan protocol.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch allows you to match on the bridge port pvid, eg.
nft add rule bridge firewall zones counter meta ibrpvid 10
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This new function allows you to fetch bridge pvid from packet path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
nft_bridge_meta should not access the bridge internal API.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Separate bridge meta key from nft_meta to meta_bridge to avoid a
dependency between the bridge module and nft_meta when using the bridge
API available through include/linux/if_bridge.h
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Recognize GRE tunnels in received ICMP errors and
properly strip the tunnel headers.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add synproxy support for nf_tables. This behaves like the iptables
synproxy target but it is structured in a way that allows us to propose
improvements in the future.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-07-03
The following pull-request contains BPF updates for your *net-next* tree.
There is a minor merge conflict in mlx5 due to 8960b38932 ("linux/dim:
Rename externally used net_dim members") which has been pulled into your
tree in the meantime, but resolution seems not that bad ... getting current
bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed
just so he's aware of the resolution below:
** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c:
<<<<<<< HEAD
static int mlx5e_open_cq(struct mlx5e_channel *c,
struct dim_cq_moder moder,
struct mlx5e_cq_param *param,
struct mlx5e_cq *cq)
=======
int mlx5e_open_cq(struct mlx5e_channel *c, struct net_dim_cq_moder moder,
struct mlx5e_cq_param *param, struct mlx5e_cq *cq)
>>>>>>> e5a3e259ef
Resolution is to take the second chunk and rename net_dim_cq_moder into
dim_cq_moder. Also the signature for mlx5e_open_cq() in ...
drivers/net/ethernet/mellanox/mlx5/core/en.h +977
... and in mlx5e_open_xsk() ...
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c +64
... needs the same rename from net_dim_cq_moder into dim_cq_moder.
** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c:
<<<<<<< HEAD
int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix));
struct dim_cq_moder icocq_moder = {0, 0};
struct net_device *netdev = priv->netdev;
struct mlx5e_channel *c;
unsigned int irq;
=======
struct net_dim_cq_moder icocq_moder = {0, 0};
>>>>>>> e5a3e259ef
Take the second chunk and rename net_dim_cq_moder into dim_cq_moder
as well.
Let me know if you run into any issues. Anyway, the main changes are:
1) Long-awaited AF_XDP support for mlx5e driver, from Maxim.
2) Addition of two new per-cgroup BPF hooks for getsockopt and
setsockopt along with a new sockopt program type which allows more
fine-grained pass/reject settings for containers. Also add a sock_ops
callback that can be selectively enabled on a per-socket basis and is
executed for every RTT to help tracking TCP statistics, both features
from Stanislav.
3) Follow-up fix from loops in precision tracking which was not propagating
precision marks and as a result verifier assumed that some branches were
not taken and therefore wrongly removed as dead code, from Alexei.
4) Fix BPF cgroup release synchronization race which could lead to a
double-free if a leaf's cgroup_bpf object is released and a new BPF
program is attached to the one of ancestor cgroups in parallel, from Roman.
5) Support for bulking XDP_TX on veth devices which improves performance
in some cases by around 9%, from Toshiaki.
6) Allow for lookups into BPF devmap and improve feedback when calling into
bpf_redirect_map() as lookup is now performed right away in the helper
itself, from Toke.
7) Add support for fq's Earliest Departure Time to the Host Bandwidth
Manager (HBM) sample BPF program, from Lawrence.
8) Various cleanups and minor fixes all over the place from many others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
windows real servers can handle gre tunnels, this patch allows
gre encapsulation with the tunneling method, thereby letting ipvs
be load balancer for windows-based services
Signed-off-by: Vadim Fedorenko <vfedorenko@yandex-team.ru>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A string which did not contain a data format specification should be put
into a sequence. Thus use the corresponding function “seq_puts”.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Uppercase is a reminiscence from the iptables infrastructure, rename
this header before this is included in stable kernels.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This avoids an indirect call per syscall for common ipv4 transports
v1 -> v2:
- avoid unneeded reclaration for udp_sendmsg, as suggested by Willem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This avoids an indirect call per syscall for common ipv6 transports
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch we have ipv{6,4} variants for {recv,send}msg,
we should use the generic _INET ICW variant to call into the proper
build-in.
This also allows dropping the now unused and rather ugly _INET4 ICW macro
v1 -> v2:
- use ICW macro to declare inet6_{recv,send}msg
- fix a couple of checkpatch offender in the code context
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will simplify indirect call wrapper invocation in the following
patch.
No functional change intended, any - out-of-tree - IPv6 user of
inet_{recv,send}msg can keep using the existing functions.
SCTP code still uses the existing version even for ipv6: as this series
will not add ICW for SCTP, moving to the new helper would not give
any benefit.
The only other in-kernel user of inet_{recv,send}msg is
pvcalls_conn_back_read(), but psvcalls explicitly creates only IPv4 socket,
so no need to update that code path, too.
v1 -> v2: drop inet6_{recv,send}msg declaration from header file,
prefer ICW macro instead
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The same code is replicated verbatim in multiple places, and the next
patches will introduce an additional user for it. Factor out a
helper and use it where appropriate. No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-07-03
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH
on BE architectures, from Jiong.
2) Fix several bugs in the x32 BPF JIT for handling shifts by 0,
from Luke and Xi.
3) Fix NULL pointer deref in btf_type_is_resolve_source_only(),
from Stanislav.
4) Properly handle the check that forwarding is enabled on the device
in bpf_ipv6_fib_lookup() helper code, from Anton.
5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit
alignment such as m68k, from Baruch.
6) Fix kernel hanging in unregister_netdevice loop while unregistering
device bound to XDP socket, from Ilya.
7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan.
8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri.
9) Fix bpftool to use correct argument in cgroup errors, from Jakub.
10) Fix detaching dummy prog in XDP redirect sample code, from Prashant.
11) Add Jonathan to AF_XDP reviewers, from Björn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now all ctrl chunks are counted for asoc stats.octrlchunks and net
SCTP_MIB_OUTCTRLCHUNKS either after queuing up or bundling, other
than the chunk maked and bundled in sctp_packet_bundle_sack, which
caused 'outctrlchunks' not consistent with 'inctrlchunks' in peer.
This issue exists since very beginning, here to fix it by increasing
both net SCTP_MIB_OUTCTRLCHUNKS and asoc stats.octrlchunks when sack
chunk is maked and bundled in sctp_packet_bundle_sack.
Reported-by: Ja Ram Jeon <jajeon@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If IPV6 was disabled, then ss command would cause a kernel warning
because the command was attempting to dump IPV6 socket information.
The fix is to just remove the warning.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202249
Fixes: 432490f9d4 ("net: ip, diag -- Add diag interface for raw sockets")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This cleanup allows the return value of the functions to be made void,
as no logic should care if these files succeed or not.
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Sage Weil <sage@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612145538.GA18772@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612145622.GA18839@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've added bpf_tcp_sock member to bpf_sock_ops and don't expect
any new tcp_sock fields in bpf_sock_ops. Let's remove
CONVERT_COMMON_TCP_SOCK_FIELDS so bpf_tcp_sock can be independently
extended.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Priyaranjan Jha <priyarjha@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Performance impact should be minimal because it's under a new
BPF_SOCK_OPS_RTT_CB_FLAG flag that has to be explicitly enabled.
Suggested-by: Eric Dumazet <edumazet@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Priyaranjan Jha <priyarjha@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Device that bound to XDP socket will not have zero refcount until the
userspace application will not close it. This leads to hang inside
'netdev_wait_allrefs()' if device unregistering requested:
# ip link del p1
< hang on recvmsg on netlink socket >
# ps -x | grep ip
5126 pts/0 D+ 0:00 ip link del p1
# journalctl -b
Jun 05 07:19:16 kernel:
unregister_netdevice: waiting for p1 to become free. Usage count = 1
Jun 05 07:19:27 kernel:
unregister_netdevice: waiting for p1 to become free. Usage count = 1
...
Fix that by implementing NETDEV_UNREGISTER event notification handler
to properly clean up all the resources and unref device.
This should also allow socket killing via ss(8) utility.
Fixes: 965a990984 ("xsk: add support for bind for Rx")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Device pointer stored in umem regardless of zero-copy mode,
so we heed to hold the device in all cases.
Fixes: c9b47cc1fa ("xsk: fix bug when trying to use both copy and zero-copy on one queue id")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
syzbot reported following spat:
BUG: KASAN: use-after-free in __write_once_size include/linux/compiler.h:221
BUG: KASAN: use-after-free in hlist_del_rcu include/linux/rculist.h:455
BUG: KASAN: use-after-free in xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
Write of size 8 at addr ffff888095e79c00 by task kworker/1:3/8066
Workqueue: events xfrm_hash_rebuild
Call Trace:
__write_once_size include/linux/compiler.h:221 [inline]
hlist_del_rcu include/linux/rculist.h:455 [inline]
xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
process_one_work+0x814/0x1130 kernel/workqueue.c:2269
Allocated by task 8064:
__kmalloc+0x23c/0x310 mm/slab.c:3669
kzalloc include/linux/slab.h:742 [inline]
xfrm_hash_alloc+0x38/0xe0 net/xfrm/xfrm_hash.c:21
xfrm_policy_init net/xfrm/xfrm_policy.c:4036 [inline]
xfrm_net_init+0x269/0xd60 net/xfrm/xfrm_policy.c:4120
ops_init+0x336/0x420 net/core/net_namespace.c:130
setup_net+0x212/0x690 net/core/net_namespace.c:316
The faulting address is the address of the old chain head,
free'd by xfrm_hash_resize().
In xfrm_hash_rehash(), chain heads get re-initialized without
any hlist_del_rcu:
for (i = hmask; i >= 0; i--)
INIT_HLIST_HEAD(odst + i);
Then, hlist_del_rcu() gets called on the about to-be-reinserted policy
when iterating the per-net list of policies.
hlist_del_rcu() will then make chain->first be nonzero again:
static inline void __hlist_del(struct hlist_node *n)
{
struct hlist_node *next = n->next; // address of next element in list
struct hlist_node **pprev = n->pprev;// location of previous elem, this
// can point at chain->first
WRITE_ONCE(*pprev, next); // chain->first points to next elem
if (next)
next->pprev = pprev;
Then, when we walk chainlist to find insertion point, we may find a
non-empty list even though we're supposedly reinserting the first
policy to an empty chain.
To fix this first unlink all exact and inexact policies instead of
zeroing the list heads.
Add the commands equivalent to the syzbot reproducer to xfrm_policy.sh,
without fix KASAN catches the corruption as it happens, SLUB poisoning
detects it a bit later.
Reported-by: syzbot+0165480d4ef07360eeda@syzkaller.appspotmail.com
Fixes: 1548bc4e05 ("xfrm: policy: delete inexact policies from inexact list on hash rebuild")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Fix minimum encryption key size check so that HCI_MIN_ENC_KEY_SIZE is
also allowed as stated in the comment.
This bug caused connection problems with devices having maximum
encryption key size of 7 octets (56-bit).
Fixes: 693cd8ce3f ("Bluetooth: Fix regression with minimum encryption key size alignment")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203997
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both tipc_udp_enable and tipc_udp_disable are called under rtnl_lock,
ub->ubsock could never be NULL in tipc_udp_disable and cleanup_bearer,
so remove the check.
Also remove the one in tipc_udp_enable by adding "free" label.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit ee28906fd7 ("ipv4: Dump route exceptions if requested") I
added a counter of per-node dumped routes (including actual routes and
exceptions), analogous to the existing counter for dumped nodes. Dumping
exceptions means we need to also keep track of how many routes are dumped
for each node: this would be just one route per node, without exceptions.
When netlink strict checking is not enabled, we dump both routes and
exceptions at the same time: the RTM_F_CLONED flag is not used as a
filter. In this case, the per-node counter 'i_fa' is incremented by one
to track the single dumped route, then also incremented by one for each
exception dumped, and then stored as netlink callback argument as skip
counter, 's_fa', to be used when a partial dump operation restarts.
The per-node counter needs to be increased by one also when we skip a
route (exception) due to a previous non-zero skip counter, because it
needs to match the existing skip counter, if we are dumping both routes
and exceptions. I missed this, and only incremented the counter, for
regular routes, if the previous skip counter was zero. This means that,
in case of a mixed dump, partial dump operations after the first one
will start with a mismatching skip counter value, one less than expected.
This means in turn that the first exception for a given node is skipped
every time a partial dump operation restarts, if netlink strict checking
is not enabled (iproute < 5.0).
It turns out I didn't repeat the test in its final version, commit
de755a8513 ("selftests: pmtu: Introduce list_flush_ipv4_exception test
case"), which also counts the number of route exceptions returned, with
iproute2 versions < 5.0 -- I was instead using the equivalent of the IPv6
test as it was before commit b964641e99 ("selftests: pmtu: Make
list_flush_ipv6_exception test more demanding").
Always increment the per-node counter by one if we previously dumped
a regular route, so that it matches the current skip counter.
Fixes: ee28906fd7 ("ipv4: Dump route exceptions if requested")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dereference wr->next /before/ the memory backing wr has been
released. This issue was found by code inspection. It is not
expected to be a significant problem because it is in an error
path that is almost never executed.
Fixes: 7c8d9e7c88 ("xprtrdma: Move Receive posting to ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If sendmsg() or sendmmsg() is called on a connected socket that hasn't had
bind() called on it, then an oops will occur when the kernel tries to
connect the call because no local endpoint has been allocated.
Fix this by implicitly binding the socket if it is in the
RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state.
Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this
to prevent further attempts to bind it.
This can be tested with:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <linux/rxrpc.h>
static const unsigned char inet6_addr[16] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa
};
int main(void)
{
struct sockaddr_rxrpc srx;
struct cmsghdr *cm;
struct msghdr msg;
unsigned char control[16];
int fd;
memset(&srx, 0, sizeof(srx));
srx.srx_family = 0x21;
srx.srx_service = 0;
srx.transport_type = AF_INET;
srx.transport_len = 0x1c;
srx.transport.sin6.sin6_family = AF_INET6;
srx.transport.sin6.sin6_port = htons(0x4e22);
srx.transport.sin6.sin6_flowinfo = htons(0x4e22);
srx.transport.sin6.sin6_scope_id = htons(0xaa3b);
memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16);
cm = (struct cmsghdr *)control;
cm->cmsg_len = CMSG_LEN(sizeof(unsigned long));
cm->cmsg_level = SOL_RXRPC;
cm->cmsg_type = RXRPC_USER_CALL_ID;
*(unsigned long *)CMSG_DATA(cm) = 0;
msg.msg_name = NULL;
msg.msg_namelen = 0;
msg.msg_iov = NULL;
msg.msg_iovlen = 0;
msg.msg_control = control;
msg.msg_controllen = cm->cmsg_len;
msg.msg_flags = 0;
fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET);
connect(fd, (struct sockaddr *)&srx, sizeof(srx));
sendmsg(fd, &msg, 0);
return 0;
}
Leading to the following oops:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:rxrpc_connect_call+0x42/0xa01
...
Call Trace:
? mark_held_locks+0x47/0x59
? __local_bh_enable_ip+0xb6/0xba
rxrpc_new_client_call+0x3b1/0x762
? rxrpc_do_sendmsg+0x3c0/0x92e
rxrpc_do_sendmsg+0x3c0/0x92e
rxrpc_sendmsg+0x16b/0x1b5
sock_sendmsg+0x2d/0x39
___sys_sendmsg+0x1a4/0x22a
? release_sock+0x19/0x9e
? reacquire_held_locks+0x136/0x160
? release_sock+0x19/0x9e
? find_held_lock+0x2b/0x6e
? __lock_acquire+0x268/0xf73
? rxrpc_connect+0xdd/0xe4
? __local_bh_enable_ip+0xb6/0xba
__sys_sendmsg+0x5e/0x94
do_syscall_64+0x7d/0x1bf
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 2341e07757 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op")
Reported-by: syzbot+7966f2a0b2c7da8939b4@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With gcc 4.1:
net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’:
net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function
Indeed, if the first jump to the send_fragmentable label is made, and
the address family is not handled in the switch() statement, ret will be
used uninitialized.
Fix this by BUG()'ing as is done in other places in rxrpc where internal
support for future address families will need adding. It should not be
possible to reach this normally as the address families are checked
up-front.
Fixes: 5a924b8951 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't cache eth dest pointer before calling pskb_may_pull.
Fixes: cf0f02d04a ("[BRIDGE]: use llc for receiving STP packets")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We would cache ether dst pointer on input in br_handle_frame_finish but
after the neigh suppress code that could lead to a stale pointer since
both ipv4 and ipv6 suppress code do pskb_may_pull. This means we have to
always reload it after the suppress code so there's no point in having
it cached just retrieve it directly.
Fixes: 057658cb33 ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports")
Fixes: ed842faeb2 ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We get a pointer to the ipv6 hdr in br_ip6_multicast_query but we may
call pskb_may_pull afterwards and end up using a stale pointer.
So use the header directly, it's just 1 place where it's needed.
Fixes: 08b202b672 ("bridge br_multicast: IPv6 MLD support.")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Martin Weinelt <martin@linuxlounge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use blackhole_netdev instead of 'lo' device with lower MTU when marking
dst "dead".
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Tested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 86029d10af ("tls: zero the crypto information from tls_context
before freeing") added memzero_explicit() calls to clear the key material
before freeing struct tls_context, but it missed tls_device.c has its
own way of freeing this structure. Replace the missing free.
Fixes: 86029d10af ("tls: zero the crypto information from tls_context before freeing")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither drivers nor the tls offload code currently supports TLS
version 1.3. Check the TLS version when installing connection
state. TLS 1.3 will just fallback to the kernel crypto for now.
Fixes: 130b392c6c ("net: tls: Add tls 1.3 support")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add get_fill_size() routine used to calculate the action size
when building a batch of events.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly, other callers of idr_get_next_ul() suffer the same
overflow bug as they don't handle it properly either.
Introduce idr_for_each_entry_continue_ul() to help these callers
iterate from a given ID.
cls_flower needs more care here because it still has overflow when
does arg->cookie++, we have to fold its nested loops into one
and remove the arg->cookie++.
Fixes: 01683a1469 ("net: sched: refactor flower walk to iterate over idr")
Fixes: 12d6066c3b ("net/mlx5: Add flow counters idr")
Reported-by: Li Shuang <shuali@redhat.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Chris Mi <chrism@mellanox.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idr_for_each_entry_ul() is buggy as it can't handle overflow
case correctly. When we have an ID == UINT_MAX, it becomes an
infinite loop. This happens when running on 32-bit CPU where
unsigned long has the same size with unsigned int.
There is no better way to fix this than casting it to a larger
integer, but we can't just 64 bit integer on 32 bit CPU. Instead
we could just use an additional integer to help us to detect this
overflow case, that is, adding a new parameter to this macro.
Fortunately tc action is its only user right now.
Fixes: 65a206c01e ("net/sched: Change act_api and act_xxx modules to use IDR")
Reported-by: Li Shuang <shuali@redhat.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chris Mi <chrism@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The macro TIPC_BC_RETR_LIM is always used in combination with 'jiffies',
so we can just as well perform the addition in the macro itself. This
way, we get a few shorter code lines and one less line break.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves the flush of works after vdev->config->del_vqs(vdev),
because we need to be sure that no workers run before to free the
'vsock' object.
Since we stopped the workers using the [tx|rx|event]_run flags,
we are sure no one is accessing the device while we are calling
vdev->config->reset(vdev), so we can safely move the workers' flush.
Before the vdev->config->del_vqs(vdev), workers can be scheduled
by VQ callbacks, so we must flush them after del_vqs(), to avoid
use-after-free of 'vsock' object.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before to call vdev->config->reset(vdev) we need to be sure that
no one is accessing the device, for this reason, we add new variables
in the struct virtio_vsock to stop the workers during the .remove().
This patch also add few comments before vdev->config->reset(vdev)
and vdev->config->del_vqs(vdev).
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some callbacks used by the upper layers can run while we are in the
.remove(). A potential use-after-free can happen, because we free
the_virtio_vsock without knowing if the callbacks are over or not.
To solve this issue we move the assignment of the_virtio_vsock at the
end of .probe(), when we finished all the initialization, and at the
beginning of .remove(), before to release resources.
For the same reason, we do the same also for the vdev->priv.
We use RCU to be sure that all callbacks that use the_virtio_vsock
ended before freeing it. This is not required for callbacks that
use vdev->priv, because after the vdev->config->del_vqs() we are sure
that they are ended and will no longer be invoked.
We also take the mutex during the .remove() to avoid that .probe() can
run while we are resetting the device.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/proc/sys/net/ipv6/flowlabel_reflect assumes written value to be in the
range of 0 to 3. Use proc_dointvec_minmax instead of proc_dointvec.
Fixes: 323a53c412 ("ipv6: tcp: enable flowlabel reflection in some RST packets")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When user has configured a large number of virtual netdev, such
as 4K vlans, the carrier on/off operation of the real netdev
will also cause it's virtual netdev's link state to be processed
in linkwatch. Currently, the processing is done in a work queue,
which may cause rtnl locking starvation problem and worker
starvation problem for other work queue, such as irqfd_inject wq.
This patch releases the cpu when link watch worker has processed
a fixed number of netdev' link watch event, and schedule the
work queue again when there is still link watch event remaining.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It allocates the extended area for outbound streams only on sendmsg
calls, if they are not yet allocated. When using the priority
stream scheduler, this initialization may imply into a subsequent
allocation, which may fail. In this case, it was aborting the stream
scheduler initialization but leaving the ->ext pointer (allocated) in
there, thus in a partially initialized state. On a subsequent call to
sendmsg, it would notice the ->ext pointer in there, and trip on
uninitialized stuff when trying to schedule the data chunk.
The fix is undo the ->ext initialization if the stream scheduler
initialization fails and avoid the partially initialized state.
Although syzkaller bisected this to commit 4ff40b8626 ("sctp: set
chunk transport correctly when it's a new asoc"), this bug was actually
introduced on the commit I marked below.
Reported-by: syzbot+c1a380d42b190ad1e559@syzkaller.appspotmail.com
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the skb is associated with a new sock, just assigning
it to skb->sk is not sufficient, we have to set its destructor
to free the sock properly too.
Reported-by: syzbot+d6636a36d3c34bd88938@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid the situation where an IPV6 only flag is applied to an IPv4 address:
# ip addr add 192.0.2.1/24 dev dummy0 nodad home mngtmpaddr noprefixroute
# ip -4 addr show dev dummy0
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet 192.0.2.1/24 scope global noprefixroute dummy0
valid_lft forever preferred_lft forever
Or worse, by sending a malicious netlink command:
# ip -4 addr show dev dummy0
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet 192.0.2.1/24 scope global nodad optimistic dadfailed home tentative mngtmpaddr noprefixroute stable-privacy dummy0
valid_lft forever preferred_lft forever
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend flowlabel_reflect bitmask to allow conditional
reflection of incoming flowlabels in echo replies.
Note this has precedence against auto flowlabels.
Add flowlabel_reflect enum to replace hard coded
values.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
esp4_get_mtu and esp6_get_mtu are exactly the same, the only difference
is a single sizeof() (ipv4 vs. ipv6 header).
Merge both into xfrm_state_mtu() and remove the indirection.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Skbs may have their checksum value populated by HW. If this is a checksum
calculated over the entire packet then the CHECKSUM_COMPLETE field is
marked. Changes to the data pointer on the skb throughout the network
stack still try to maintain this complete csum value if it is required
through functions such as skb_postpush_rcsum.
The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when
changes are made to packet data without a push or a pull. This occurs when
the ethertype of the MAC header is changed or when MPLS lse fields are
modified.
The modification is carried out using the csum_partial function to get the
csum of a buffer and add it into the larger checksum. The buffer is an
inversion of the data to be removed followed by the new data. Because the
csum is calculated over 16 bits and these values align with 16 bits, the
effect is the removal of the old value from the CHECKSUM_COMPLETE and
addition of the new value.
However, the csum fed into the function and the outcome of the
calculation are also inverted. This would only make sense if it was the
new value rather than the old that was inverted in the input buffer.
Fix the issue by removing the bit inverts in the csum_partial calculation.
The bug was verified and the fix tested by comparing the folded value of
the updated CHECKSUM_COMPLETE value with the folded value of a full
software checksum calculation (reset skb->csum to 0 and run
skb_checksum_complete(skb)). Prior to the fix the outcomes differed but
after they produce the same result.
Fixes: 25cd9ba0ab ("openvswitch: Add basic MPLS support to kernel")
Fixes: bc7cc5999f ("openvswitch: update checksum in {push,pop}_mpls")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series adds some misc updates for mlx5e driver
1) Allow adding the same mac more than once in MPFS table
2) Move to HW checksumming advertising
3) Report netdevice MPLS features
4) Correct physical port name of the PF representor
5) Reduce stack usage in mlx5_eswitch_termtbl_create
6) Refresh TIR improvement for representors
7) Expose same physical switch_id for all representors
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl0WnOAACgkQSD+KveBX
+j6xQwgAuarc5NCi8jg9m+yXFXj/kr1cPwZ6Pxadi8hAd3NbEMGtutdFZIXsIXZZ
y0uYxzkrCqXUUh2ZnpE09YlBISLyVSt3WGdqgJn1wel//O33gS6GpYXwVGOfgL7n
+d9FCYvrun6v6aOHM5ZGxQ+qxHzupz5k4F0r7fz2Gsd+JEgL58nwc8ERSbOTbZMO
TLO1pcxlXWwGSqd5uc4AHi8hZTvuzWl/Fm5hOTP9gx/Sl3UaYWa3WiTgj5uOD5Zt
956Xqk0LLwSaiKVAsFjIa7HHWOaDLnVmbmTUzhv82hharqmvPW1CIWlx1gv01KoP
wMWoyyoy7cTyyrWNozWEed/14LyEVA==
=S4bJ
-----END PGP SIGNATURE-----
Merge tag 'mlx5e-updates-2019-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2019-06-28
This series adds some misc updates for mlx5e driver
1) Allow adding the same mac more than once in MPFS table
2) Move to HW checksumming advertising
3) Report netdevice MPLS features
4) Correct physical port name of the PF representor
5) Reduce stack usage in mlx5_eswitch_termtbl_create
6) Refresh TIR improvement for representors
7) Expose same physical switch_id for all representors
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow em_ipt to use addrtype for matching. Restrict the use only to
revision 1 which has IPv6 support. Since it's a NFPROTO_UNSPEC xt match
we use the user-specified nfproto for matching, in case it's unspecified
both v4/v6 will be matched by the rule.
v2: no changes, was patch 5 in v1
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we dump NFPROTO_UNSPEC as nfproto user-space libxtables can't handle
it and would exit with an error like:
"libxtables: unhandled NFPROTO in xtables_set_nfproto"
In order to avoid the error return the user-specified nfproto. If we
don't record it then the match family is used which can be
NFPROTO_UNSPEC. Even if we add support to mask NFPROTO_UNSPEC in
iproute2 we have to be compatible with older versions which would be
also be allowed to add NFPROTO_UNSPEC matches (e.g. addrtype after the
last patch).
v3: don't use the user nfproto for matching, only for dumping the rule,
also don't allow the nfproto to be unspecified (explained above)
v2: adjust changes to missing patch, was patch 04 in v1
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the family based on the packet if it's unspecified otherwise
protocol-neutral matches will have wrong information (e.g. NFPROTO_UNSPEC).
In preparation for using NFPROTO_UNSPEC xt matches.
v2: set the nfproto only when unspecified
Suggested-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restrict matching only to ip/ipv6 traffic and make sure we can use the
headers, otherwise matches will be attempted on any protocol which can
be unexpected by the xt matches. Currently policy supports only ipv4/6.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter did not expect that skb_dst_force() can cause skb to lose its
dst entry.
I got a bug report with a skb->dst NULL dereference in netfilter
output path. The backtrace contains nf_reinject(), so the dst might have
been cleared when skb got queued to userspace.
Other users were fixed via
if (skb_dst(skb)) {
skb_dst_force(skb);
if (!skb_dst(skb))
goto handle_err;
}
But I think its preferable to make the 'dst might be cleared' part
of the function explicit.
In netfilter case, skb with a null dst is expected when queueing in
prerouting hook, so drop skb for the other hooks.
v2:
v1 of this patch returned true in case skb had no dst entry.
Eric said:
Say if we have two skb_dst_force() calls for some reason
on the same skb, only the first one will return false.
This now returns false even when skb had no dst, as per Erics
suggestion, so callers might need to check skb_dst() first before
skb_dst_force().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when sctp_connect() is called with a wrong sa_family, it binds
to a port but doesn't set bp->port, then sctp_get_af_specific will
return NULL and sctp_connect() returns -EINVAL.
Then if sctp_bind() is called to bind to another port, the last
port it has bound will leak due to bp->port is NULL by then.
sctp_connect() doesn't need to bind ports, as later __sctp_connect
will do it if bp->port is NULL. So remove it from sctp_connect().
While at it, remove the unnecessary sockaddr.sa_family len check
as it's already done in sctp_inet_connect.
Fixes: 644fbdeacf ("sctp: fix the issue that flags are ignored when using kernel_connect")
Reported-by: syzbot+079bf326b38072f849d9@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable bugfixes:
- SUNRPC: Fix up calculation of client message length # 5.1+
- NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O # 4.8+
-----BEGIN PGP SIGNATURE-----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=FATk
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull two more NFS client fixes from Anna Schumaker:
"These are both stable fixes.
One to calculate the correct client message length in the case of
partial transmissions. And the other to set the proper TCP timeout for
flexfiles"
* tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O
SUNRPC: Fix up calculation of client message length
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
VTS5zps=
=huBY
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc6' into rdma.git for-next
For dependencies in next patches.
Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The bpf_redirect_map() helper used by XDP programs doesn't return any
indication of whether it can successfully redirect to the map index it was
given. Instead, BPF programs have to track this themselves, leading to
programs using duplicate maps to track which entries are populated in the
devmap.
This patch fixes this by moving the map lookup into the bpf_redirect_map()
helper, which makes it possible to return failure to the eBPF program. The
lower bits of the flags argument is used as the return code, which means
that existing users who pass a '0' flag argument will get XDP_ABORTED.
With this, a BPF program can check the return code from the helper call and
react by, for instance, substituting a different redirect. This works for
any type of map used for redirect.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The bpf_redirect_info struct has an 'ifindex' member which was named back
when the redirects could only target egress interfaces. Now that we can
also redirect to sockets and CPUs, this is a bit misleading, so rename the
member to tgt_index.
Reorder the struct members so we can have 'tgt_index' and 'tgt_value' next
to each other in a subsequent patch.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The socket map uses a linked list instead of a bitmap to keep track of
which entries to flush. Do the same for devmap and cpumap, as this means we
don't have to care about the map index when enqueueing things into the
map (and so we can cache the map lookup).
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Misc updates from mlx5-next branch:
1) E-Switch vport metadata support for source vport matching
2) Convert mkey_table to XArray
3) Shared IRQs and to use single IRQ for all async EQs
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When the taprio qdisc is running in "txtime offload" mode, it will
set the launchtime value (in skb->tstamp) for all the packets which do
not have the SO_TXTIME socket option. But, the TCP packets already have
this value set and it indicates the earliest departure time represented
in CLOCK_MONOTONIC clock.
We need to respect the timestamp set by the TCP subsystem. So, convert
this time to the clock which taprio is using and ensure that the packet
is not transmitted before the deadline set by TCP.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Later in this series we will need to transform from
CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we are seeing non-critical packets being transmitted outside of
their timeslice. We can confirm that the packets are being dequeued at the
right time. So, the delay is induced in the hardware side. The most likely
reason is the hardware queues are starving the lower priority queues.
In order to improve the performance of taprio, we will be making use of the
txtime feature provided by the ETF qdisc. For all the packets which do not
have the SO_TXTIME option set, taprio will set the transmit timestamp (set
in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit
time for the packet is set to when the gate is open. If SO_TXTIME is set,
the TAPrio qdisc will validate whether the timestamp (in skb->tstamp)
occurs when the gate corresponding to skb's traffic class is open.
Following two parameters added to support this mode:
- flags: used to enable txtime-assist mode. Will also be used to enable
other modes (like hardware offloading) later.
- txtime-delay: This indicates the minimum time it will take for the packet
to hit the wire. This is useful in determining whether we can transmit
the packet in the remaining time if the gate corresponding to the packet is
currently open.
An example configuration for enabling txtime-assist:
tc qdisc replace dev eth0 parent root handle 100 taprio \\
num_tc 3 \\
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\
queues 1@0 1@0 1@0 \\
base-time 1558653424279842568 \\
sched-entry S 01 300000 \\
sched-entry S 02 300000 \\
sched-entry S 04 400000 \\
flags 0x1 \\
txtime-delay 40000 \\
clockid CLOCK_TAI
tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\
offload delta 200000 clockid CLOCK_TAI
Note that all the traffic classes are mapped to the same queue. This is
only possible in taprio when txtime-assist is enabled. Also, note that the
ETF Qdisc is enabled with offload mode set.
In this mode, if the packet's traffic class is open and the complete packet
can be transmitted, taprio will try to transmit the packet immediately.
This will be done by setting skb->tstamp to current_time + the time delta
indicated in the txtime-delay parameter. This parameter indicates the time
taken (in software) for packet to reach the network adapter.
If the packet cannot be transmitted in the current interval or if the
packet's traffic is not currently transmitting, the skb->tstamp is set to
the next available timestamp value. This is tracked in the next_launchtime
parameter in the struct sched_entry.
The behaviour w.r.t admin and oper schedules is not changed from what is
present in software mode.
The transmit time is already known in advance. So, we do not need the HR
timers to advance the schedule and wakeup the dequeue side of taprio. So,
HR timer won't be run when this mode is enabled.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove inline directive from length_to_duration(). We will let the compiler
make the decisions.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cycle time for a particular schedule is calculated only when it is first
installed. So, it makes sense to just calculate it once right after the
'cycle_time' parameter has been parsed and store it in cycle_time.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, etf expects a socket with SO_TXTIME option set for each packet
it encounters. So, it will drop all other packets. But, in the future
commits we are planning to add functionality where tstamp value will be set
by another qdisc. Also, some packets which are generated from within the
kernel (e.g. ICMP packets) do not have any socket associated with them.
So, this commit adds support for skip_sock_check. When this option is set,
etf will skip checking for a socket and other associated options for all
skbs.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC hooks allow the application of filters and actions to packets at both
ingress and egress of the network stack. It is possible, with poor
configuration, that this can produce loops whereby an ingress hook calls
a mirred egress action that has an egress hook that redirects back to
the first ingress etc. The TC core classifier protects against loops when
doing reclassifies but there is no protection against a packet looping
between multiple hooks and recursively calling act_mirred. This can lead
to stack overflow panics.
Add a per CPU counter to act_mirred that is incremented for each recursive
call of the action function when processing a packet. If a limit is passed
then the packet is dropped and CPU counter reset.
Note that this patch does not protect against loops in TC datapaths. Its
aim is to prevent stack overflow kernel panics that can be a consequence
of such loops.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TC_ACT_REINSERT return type was added as an in-kernel only option to
allow a packet ingress or egress redirect. This is used to avoid
unnecessary skb clones in situations where they are not required. If a TC
hook returns this code then the packet is 'reinserted' and no skb consume
is carried out as no clone took place.
This return type is only used in act_mirred. Rather than have the reinsert
called from the main datapath, call it directly in act_mirred. Instead of
returning TC_ACT_REINSERT, change the type to the new TC_ACT_CONSUMED
which tells the caller that the packet has been stolen by another process
and that no consume call is required.
Moving all redirect calls to the act_mirred code is in preparation for
tracking recursion created by act_mirred.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tools such as vpnc try to flush routes when run inside network
namespaces by writing 1 into /proc/sys/net/ipv4/route/flush. This
currently does not work because flush is not enabled in non-initial
network namespaces.
Since routes are per network namespace it is safe to enable
/proc/sys/net/ipv4/route/flush in there.
Link: https://github.com/lxc/lxd/issues/4257
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix memleak reported by syzkaller when registering IPVS hooks,
patch from Julian Anastasov.
2) Fix memory leak in start_sync_thread, also from Julian.
3) Fix conntrack deletion via ctnetlink, from Felix Kaechele.
4) Fix reject for ICMP due to incorrect checksum handling, from
He Zhe.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the leds documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Since v5.1-rc1, some types of packets do not get unreachable reply with the
following iptables setting. Fox example,
$ iptables -A INPUT -p icmp --icmp-type 8 -j REJECT
$ ping 127.0.0.1 -c 1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
— 127.0.0.1 ping statistics —
1 packets transmitted, 0 received, 100% packet loss, time 0ms
We should have got the following reply from command line, but we did not.
From 127.0.0.1 icmp_seq=1 Destination Port Unreachable
Yi Zhao reported it and narrowed it down to:
7fc3822536 ("netfilter: reject: skip csum verification for protocols that don't support it"),
This is because nf_ip_checksum still expects pseudo-header protocol type 0 for
packets that are of neither TCP or UDP, and thus ICMP packets are mistakenly
treated as TCP/UDP.
This patch corrects the conditions in nf_ip_checksum and all other places that
still call it with protocol 0.
Fixes: 7fc3822536 ("netfilter: reject: skip csum verification for protocols that don't support it")
Reported-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- bump version strings, by Simon Wunderlich
- fix includes for _MAX constants, atomic functions and fwdecls,
by Sven Eckelmann (3 patches)
- shorten multicast tt/tvlv worker spinlock section, by Linus Luessing
- routeable multicast preparations: implement MAC multicast filtering,
by Linus Luessing (2 patches, David Millers comments integrated)
- remove return value checks for debugfs_create, by Greg Kroah-Hartman
- add routable multicast optimizations, by Linus Luessing (2 patches)
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAl0WG8UWHHN3QHNpbW9u
d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoWU9D/9bzRACAW/jwDqVw9NVk6kpjzXa
fRj+4raXjDCug67XLdWd50KW+gen5HkkkOonu96Iew6ZGceTvqOciPKdVXnjH30n
2Bi/+K56LYWomaUMWD+aVhjgEKOIjDYd1ueqZCGsMrIFuhA5MonFWrigpSiQv0Gr
s0cbxbKOl5EO+lGFgySYznVdJ/K+9RlHyGB+hkthg9CAFaJX92wvwcFW37+cLgOS
3B6T1PylyWn72uPfac2Jd0M8yQkPaNtZqwJBj8Y0wJ7cVfj29p/VZdlCn/g5oRKT
VtRnuukOWNGn942+C88pl4YhC9rTipFb4qd9sgj5oDlj5d6B9+ZHy8vyhFQEByzJ
2l4rjkNIjwfEkw3QIxZT9/HFnyymrT08sGUtGzKAhIUcwXAe0Zm83EazGzig0UQ3
hjXZRloPldQ93CnboychqX7erDz3qGBTb+v+T+JDXzV0bR5UD4VWs/X2K6tls0nB
bacin9O7VZgo2uaxkrzNKxzRKYPFn8LbpSitINZEYbNllncdCFfhEQ3depdc//SL
WachCKPkwLRXSJCIXjnhGQSmLR4SvTP6xucr9ImwpE12Px4DWRGv8jux289q3flu
ZdX2xAUsLMLsbKjELwAJrgH1HaKNZhsw16UxCc4QSNqe9RhwD/Qc/O6Gj11ONhGn
6ury81y2zFpBu4Acrg==
=nP3L
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20190627v2' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- fix includes for _MAX constants, atomic functions and fwdecls,
by Sven Eckelmann (3 patches)
- shorten multicast tt/tvlv worker spinlock section, by Linus Luessing
- routeable multicast preparations: implement MAC multicast filtering,
by Linus Luessing (2 patches, David Millers comments integrated)
- remove return value checks for debugfs_create, by Greg Kroah-Hartman
- add routable multicast optimizations, by Linus Luessing (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix a leaked TVLV handler which wasn't unregistered, by Jeremy Sowden
- fix duplicated OGMs when interfaces are set UP, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=TqkI
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20190627' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix a leaked TVLV handler which wasn't unregistered, by Jeremy Sowden
- fix duplicated OGMs when interfaces are set UP, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case where a record marker was used, xs_sendpages() needs
to return the length of the payload + record marker so that we
operate correctly in the case of a partial transmission.
When the callers check return value, they therefore need to
take into account the record marker length.
Fixes: 06b5fc3ad9 ("Merge tag 'nfs-rdma-for-5.1-1'...")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
As other udp/ip tunnels do, tipc udp media should also have a
lockless dst_cache supported on its tx path.
Here we add dst_cache into udp_replicast to support dst cache
for both rmcast and rcast, and rmcast uses ub->rcast and each
rcast uses its own node in ub->rcast.list.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new route handling in ip_mc_finish_output() from 'net' overlapped
with the new support for returning congestion notifications from BPF
programs.
In order to handle this I had to take the dev_loopback_xmit() calls
out of the switch statement.
The aquantia driver conflicts were simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi.
2) Fix TX completion to be finite, from Sergej Benilov.
3) Use register_pernet_device to avoid a dst leak in tipc, from Xin
Long.
4) Double free of TX cleanup in Dirk van der Merwe.
5) Memory leak in packet_set_ring(), from Eric Dumazet.
6) Out of bounds read in qmi_wwan, from Bjørn Mork.
7) Fix iif used in mcast/bcast looped back packets, from Stephen
Suryaputra.
8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
sctp: change to hold sk after auth shkey is created successfully
ipv6: fix neighbour resolution with raw socket
ipv6: constify rt6_nexthop()
net: dsa: microchip: Use gpiod_set_value_cansleep()
net: aquantia: fix vlans not working over bridged network
ipv4: reset rt_iif for recirculated mcast/bcast out pkts
team: Always enable vlan tx offload
net/smc: Fix error path in smc_init
net/smc: hold conns_lock before calling smc_lgr_register_conn()
bonding: Always enable vlan tx offload
net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down"
ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop
qmi_wwan: Fix out-of-bounds read
tipc: check msg->req data len in tipc_nl_compat_bearer_disable
net: macb: do not copy the mac address if NULL
net/packet: fix memory leak in packet_set_ring()
net/tls: fix page double free on TX cleanup
net/sched: cbs: Fix error path of cbs_module_init
tipc: change to use register_pernet_device
...
Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and
BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks.
BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before
passing them down to the kernel or bypass kernel completely.
BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that
kernel returns.
Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure.
The buffer memory is pre-allocated (because I don't think there is
a precedent for working with __user memory from bpf). This might be
slow to do for each {s,g}etsockopt call, that's why I've added
__cgroup_bpf_prog_array_is_empty that exits early if there is nothing
attached to a cgroup. Note, however, that there is a race between
__cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup
program layout might have changed; this should not be a problem
because in general there is a race between multiple calls to
{s,g}etsocktop and user adding/removing bpf progs from a cgroup.
The return code of the BPF program is handled as follows:
* 0: EPERM
* 1: success, continue with next BPF program in the cgroup chain
v9:
* allow overwriting setsockopt arguments (Alexei Starovoitov):
* use set_fs (same as kernel_setsockopt)
* buffer is always kzalloc'd (no small on-stack buffer)
v8:
* use s32 for optlen (Andrii Nakryiko)
v7:
* return only 0 or 1 (Alexei Starovoitov)
* always run all progs (Alexei Starovoitov)
* use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov)
(decided to use optval=-1 instead, optval=0 might be a valid input)
* call getsockopt hook after kernel handlers (Alexei Starovoitov)
v6:
* rework cgroup chaining; stop as soon as bpf program returns
0 or 2; see patch with the documentation for the details
* drop Andrii's and Martin's Acked-by (not sure they are comfortable
with the new state of things)
v5:
* skip copy_to_user() and put_user() when ret == 0 (Martin Lau)
v4:
* don't export bpf_sk_fullsock helper (Martin Lau)
* size != sizeof(__u64) for uapi pointers (Martin Lau)
* offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau)
v3:
* typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko)
* reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii
Nakryiko)
* use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau)
* use BPF_FIELD_SIZEOF() for consistency (Martin Lau)
* new CG_SOCKOPT_ACCESS macro to wrap repeated parts
v2:
* moved bpf_sockopt_kern fields around to remove a hole (Martin Lau)
* aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau)
* bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau)
* added [0,2] return code check to verifier (Martin Lau)
* dropped unused buf[64] from the stack (Martin Lau)
* use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau)
* dropped bpf_target_off from ctx rewrites (Martin Lau)
* use return code for kernel bypass (Martin Lau & Andrii Nakryiko)
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace the uid/gid/perm permissions checking on a key with an ACL to allow
the SETATTR and SEARCH permissions to be split. This will also allow a
greater range of subjects to represented.
============
WHY DO THIS?
============
The problem is that SETATTR and SEARCH cover a slew of actions, not all of
which should be grouped together.
For SETATTR, this includes actions that are about controlling access to a
key:
(1) Changing a key's ownership.
(2) Changing a key's security information.
(3) Setting a keyring's restriction.
And actions that are about managing a key's lifetime:
(4) Setting an expiry time.
(5) Revoking a key.
and (proposed) managing a key as part of a cache:
(6) Invalidating a key.
Managing a key's lifetime doesn't really have anything to do with
controlling access to that key.
Expiry time is awkward since it's more about the lifetime of the content
and so, in some ways goes better with WRITE permission. It can, however,
be set unconditionally by a process with an appropriate authorisation token
for instantiating a key, and can also be set by the key type driver when a
key is instantiated, so lumping it with the access-controlling actions is
probably okay.
As for SEARCH permission, that currently covers:
(1) Finding keys in a keyring tree during a search.
(2) Permitting keyrings to be joined.
(3) Invalidation.
But these don't really belong together either, since these actions really
need to be controlled separately.
Finally, there are number of special cases to do with granting the
administrator special rights to invalidate or clear keys that I would like
to handle with the ACL rather than key flags and special checks.
===============
WHAT IS CHANGED
===============
The SETATTR permission is split to create two new permissions:
(1) SET_SECURITY - which allows the key's owner, group and ACL to be
changed and a restriction to be placed on a keyring.
(2) REVOKE - which allows a key to be revoked.
The SEARCH permission is split to create:
(1) SEARCH - which allows a keyring to be search and a key to be found.
(2) JOIN - which allows a keyring to be joined as a session keyring.
(3) INVAL - which allows a key to be invalidated.
The WRITE permission is also split to create:
(1) WRITE - which allows a key's content to be altered and links to be
added, removed and replaced in a keyring.
(2) CLEAR - which allows a keyring to be cleared completely. This is
split out to make it possible to give just this to an administrator.
(3) REVOKE - see above.
Keys acquire ACLs which consist of a series of ACEs, and all that apply are
unioned together. An ACE specifies a subject, such as:
(*) Possessor - permitted to anyone who 'possesses' a key
(*) Owner - permitted to the key owner
(*) Group - permitted to the key group
(*) Everyone - permitted to everyone
Note that 'Other' has been replaced with 'Everyone' on the assumption that
you wouldn't grant a permit to 'Other' that you wouldn't also grant to
everyone else.
Further subjects may be made available by later patches.
The ACE also specifies a permissions mask. The set of permissions is now:
VIEW Can view the key metadata
READ Can read the key content
WRITE Can update/modify the key content
SEARCH Can find the key by searching/requesting
LINK Can make a link to the key
SET_SECURITY Can change owner, ACL, expiry
INVAL Can invalidate
REVOKE Can revoke
JOIN Can join this keyring
CLEAR Can clear this keyring
The KEYCTL_SETPERM function is then deprecated.
The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set,
or if the caller has a valid instantiation auth token.
The KEYCTL_INVALIDATE function then requires INVAL.
The KEYCTL_REVOKE function then requires REVOKE.
The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an
existing keyring.
The JOIN permission is enabled by default for session keyrings and manually
created keyrings only.
======================
BACKWARD COMPATIBILITY
======================
To maintain backward compatibility, KEYCTL_SETPERM will translate the
permissions mask it is given into a new ACL for a key - unless
KEYCTL_SET_ACL has been called on that key, in which case an error will be
returned.
It will convert possessor, owner, group and other permissions into separate
ACEs, if each portion of the mask is non-zero.
SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE
permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned
on if a keyring is being altered.
The KEYCTL_DESCRIBE function translates the ACL back into a permissions
mask to return depending on possessor, owner, group and everyone ACEs.
It will make the following mappings:
(1) INVAL, JOIN -> SEARCH
(2) SET_SECURITY -> SETATTR
(3) REVOKE -> WRITE if SETATTR isn't already set
(4) CLEAR -> WRITE
Note that the value subsequently returned by KEYCTL_DESCRIBE may not match
the value set with KEYCTL_SETATTR.
=======
TESTING
=======
This passes the keyutils testsuite for all but a couple of tests:
(1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now
returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed
if the type doesn't have ->read(). You still can't actually read the
key.
(2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't
work as Other has been replaced with Everyone in the ACL.
Signed-off-by: David Howells <dhowells@redhat.com>
Some drivers want to access the data transmitted in order to implement
acceleration features of the NICs. It is also useful in AF_XDP TX flow.
Change the xsk_umem_consume_tx API to return the whole xdp_desc, that
contains the data pointer, length and DMA address, instead of only the
latter two. Adapt the implementation of i40e and ixgbe to this change.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make it possible for the application to determine whether the AF_XDP
socket is running in zero-copy mode. To achieve this, add a new
getsockopt option XDP_OPTIONS that returns flags. The only flag
supported for now is the zero-copy mode indicator.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a function that checks whether the Fill Ring has the specified
amount of descriptors available. It will be useful for mlx5e that wants
to check in advance, whether it can allocate a bulk of RX descriptors,
to get the best performance.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Gateway validation does not need a dst_entry, it only needs the fib
entry to validate the gateway resolution and egress device. So,
convert ip6_nh_lookup_table from ip6_pol_route to fib6_table_lookup
and ip6_route_check_nh to use fib6_lookup over rt6_lookup.
ip6_pol_route is a call to fib6_table_lookup and if successful a call
to fib6_select_path. From there the exception cache is searched for an
entry or a dst_entry is created to return to the caller. The exception
entry is not relevant for gateway validation, so what matters are the
calls to fib6_table_lookup and then fib6_select_path.
Similarly, rt6_lookup can be replaced with a call to fib6_lookup with
RT6_LOOKUP_F_IFACE set in flags. Again, the exception cache search is
not relevant, only the lookup with path selection. The primary difference
in the lookup paths is the use of rt6_select with fib6_lookup versus
rt6_device_match with rt6_lookup. When you remove complexities in the
rt6_select path, e.g.,
1. saddr is not set for gateway validation, so RT6_LOOKUP_F_HAS_SADDR
is not relevant
2. rt6_check_neigh is not called so that removes the RT6_NUD_FAIL_DO_RR
return and round-robin logic.
the code paths are believed to be equivalent for the given use case -
validate the gateway and optionally given the device. Furthermore, it
aligns the validation with onlink code path and the lookup path actually
used for rx and tx.
Adjust the users, ip6_route_check_nh_onlink and ip6_route_check_nh to
handle a fib6_info vs a rt6_info when performing validation checks.
Existing selftests fib-onlink-tests.sh and fib_tests.sh are used to
verify the changes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we not only track the presence of multicast listeners but also
multicast routers we can safely apply group-aware multicast-to-unicast
forwarding to packets with a destination address of scope greater than
link-local as well.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
To be able to apply our group aware multicast optimizations to packets
with a scope greater than link-local we need to not only keep track of
multicast listeners but also multicast routers.
With this patch a node detects the presence of multicast routers on
its segment by checking if
/proc/sys/net/ipv{4,6}/conf/<bat0|br0(bat)>/mc_forwarding is set for one
thing. This option is enabled by multicast routing daemons and needed
for the kernel's multicast routing tables to receive and route packets.
For another thing if a bridge is configured on top of bat0 then the
presence of an IPv6 multicast router behind this bridge is currently
detected by checking for an IPv6 multicast "All Routers Address"
(ff02::2). This should later be replaced by querying the bridge, which
performs proper, RFC4286 compliant Multicast Router Discovery (our
simplified approach includes more hosts than necessary, most notably
not just multicast routers but also unicast ones and is not applicable
for IPv4).
If no multicast router is detected then this is signalized via the new
BATADV_MCAST_WANT_NO_RTR4 and BATADV_MCAST_WANT_NO_RTR6
multicast tvlv flags.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because we don't care if debugfs works or not, this trickles back a bit
so we can clean things up by making some functions return void instead
of an error value that is never going to fail.
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sven@narfation.org: drop unused variables]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
When a bridge is added on top of bat0 we set the WANT_ALL_UNSNOOPABLES
flag. Which means we sign up for all traffic for ff02::1/128 and
224.0.0.0/24.
When the node itself had IPv6 enabled or joined a group in 224.0.0.0/24
itself then so far this would result in a multicast TT entry which is
redundant to the WANT_ALL_UNSNOOPABLES.
With this patch such redundant TT entries are avoided.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Instead of collecting multicast MAC addresses from the netdev hw mc
list collect a node's multicast listeners from the IP lists and convert
those to MAC addresses.
This allows to exclude addresses of specific scope later. On a
multicast MAC address the IP destination scope is not visible anymore.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
There are common steps when releasing an accepted or unaccepted socket.
Move this code into a common routine.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
secondary address promotion causes infinite loop -- it arranges
for ifa->ifa_next to point back to itself.
Problem is that 'prev_prom' and 'last_prim' might point at the same entry,
so 'last_sec' pointer must be obtained after prev_prom->next update.
Fixes: 2638eb8b50 ("net: ipv4: provide __rcu annotation for ifa_list")
Reported-by: Ran Rozenstein <ranro@mellanox.com>
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When parsing an ethtool_rx_flow_spec, users can specify an ethernet flow
which could contain matches based on the ethernet header, such as the
MAC address, the VLAN tag or the ethertype.
ETHER_FLOW uses the src and dst ethernet addresses, along with the
ethertype as keys. Matches based on the vlan tag are also possible, but
they are specified using the special FLOW_EXT flag.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Pablo Neira Ayuso <pablo@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an application is run that:
a) Sets its scheduler to be SCHED_FIFO
and
b) Opens a memory mapped AF_PACKET socket, and sends frames with the
MSG_DONTWAIT flag cleared, its possible for the application to hang
forever in the kernel. This occurs because when waiting, the code in
tpacket_snd calls schedule, which under normal circumstances allows
other tasks to run, including ksoftirqd, which in some cases is
responsible for freeing the transmitted skb (which in AF_PACKET calls a
destructor that flips the status bit of the transmitted frame back to
available, allowing the transmitting task to complete).
However, when the calling application is SCHED_FIFO, its priority is
such that the schedule call immediately places the task back on the cpu,
preventing ksoftirqd from freeing the skb, which in turn prevents the
transmitting task from detecting that the transmission is complete.
We can fix this by converting the schedule call to a completion
mechanism. By using a completion queue, we force the calling task, when
it detects there are no more frames to send, to schedule itself off the
cpu until such time as the last transmitted skb is freed, allowing
forward progress to be made.
Tested by myself and the reporter, with good results
Change Notes:
V1->V2:
Enhance the sleep logic to support being interruptible and
allowing for honoring to SK_SNDTIMEO (Willem de Bruijn)
V2->V3:
Rearrage the point at which we wait for the completion queue, to
avoid needing to check for ph/skb being null at the end of the loop.
Also move the complete call to the skb destructor to avoid needing to
modify __packet_set_status. Also gate calling complete on
packet_read_pending returning zero to avoid multiple calls to complete.
(Willem de Bruijn)
Move timeo computation within loop, to re-fetch the socket
timeout since we also use the timeo variable to record the return code
from the wait_for_complete call (Neil Horman)
V3->V4:
Willem has requested that the control flow be restored to the
previous state. Doing so lets us eliminate the need for the
po->wait_on_complete flag variable, and lets us get rid of the
packet_next_frame function, but introduces another complexity.
Specifically, but using the packet pending count, we can, if an
applications calls sendmsg multiple times with MSG_DONTWAIT set, each
set of transmitted frames, when complete, will cause
tpacket_destruct_skb to issue a complete call, for which there will
never be a wait_on_completion call. This imbalance will lead to any
future call to wait_for_completion here to return early, when the frames
they sent may not have completed. To correct this, we need to re-init
the completion queue on every call to tpacket_snd before we enter the
loop so as to ensure we wait properly for the frames we send in this
iteration.
Change the timeout and interrupted gotos to out_put rather than
out_status so that we don't try to free a non-existant skb
Clean up some extra newlines (Willem de Bruijn)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now in sctp_endpoint_init(), it holds the sk then creates auth
shkey. But when the creation fails, it doesn't release the sk,
which causes a sk defcnf leak,
Here to fix it by only holding the sk when auth shkey is created
successfully.
Fixes: a29a5bd4f5 ("[SCTP]: Implement SCTP-AUTH initializations.")
Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com
Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The scenario is the following: the user uses a raw socket to send an ipv6
packet, destinated to a not-connected network, and specify a connected nh.
Here is the corresponding python script to reproduce this scenario:
import socket
IPPROTO_RAW = 255
send_s = socket.socket(socket.AF_INET6, socket.SOCK_RAW, IPPROTO_RAW)
# scapy
# p = IPv6(src='fd00💯:1', dst='fd00:200::fa')/ICMPv6EchoRequest()
# str(p)
req = b'`\x00\x00\x00\x00\x08:@\xfd\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xfd\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfa\x80\x00\x81\xc0\x00\x00\x00\x00'
send_s.sendto(req, ('fd00:175::2', 0, 0, 0))
fd00:175::/64 is a connected route and fd00:200::fa is not a connected
host.
With this scenario, the kernel starts by sending a NS to resolve
fd00:175::2. When it receives the NA, it flushes its queue and try to send
the initial packet. But instead of sending it, it sends another NS to
resolve fd00:200::fa, which obvioulsy fails, thus the packet is dropped. If
the user sends again the packet, it now uses the right nh (fd00:175::2).
The problem is that ip6_dst_lookup_neigh() uses the rt6i_gateway, which is
:: because the associated route is a connected route, thus it uses the dst
addr of the packet. Let's use rt6_nexthop() to choose the right nh.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no functional change in this patch, it only prepares the next one.
rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const
variables.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dst_default_metrics has all of the metrics initialized to 0, so nothing
will be added to the skb in rtnetlink_put_metrics. Avoid the loop if
metrics is from dst_default_metrics.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create key domain tags for network namespaces and make it possible to
automatically tag keys that are used by networked services (e.g. AF_RXRPC,
AFS, DNS) with the default network namespace if not set by the caller.
This allows keys with the same description but in different namespaces to
coexist within a keyring.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: netdev@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-afs@lists.infradead.org
Add a 'recurse' flag for keyring searches so that the flag can be omitted
and recursion disabled, thereby allowing just the nominated keyring to be
searched and none of the children.
Signed-off-by: David Howells <dhowells@redhat.com>
Multicast or broadcast egress packets have rt_iif set to the oif. These
packets might be recirculated back as input and lookup to the raw
sockets may fail because they are bound to the incoming interface
(skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function
returns rt_iif instead of skb_iif. Hence, the lookup fails.
v2: Make it non vrf specific (David Ahern). Reword the changelog to
reflect it.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If register_pernet_subsys success in smc_init,
we should cleanup it in case any other error.
Fixes: 64e28b52c7 (net/smc: add pnet table namespace support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After smc_lgr_create(), the newly created link group is added
to smc_lgr_list, thus is accessible from other context.
Although link group creation is serialized by
smc_create_lgr_pending, the new link group may still be accessed
concurrently. For example, if ib_device is no longer active,
smc_ib_port_event_work() will call smc_port_terminate(), which
in turn will call __smc_lgr_terminate() on every link group of
this device. So conns_lock is required here.
Signed-off-by: Huaping Zhou <zhp@smail.nju.edu.cn>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix sparse warning:
net/core/xdp.c:88:6: warning:
symbol '__mem_id_disconnect' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Clang warns:
In file included from net/xdp/xsk_queue.c:10:
net/xdp/xsk_queue.h:292:2: warning: expression result unused
[-Wunused-value]
WRITE_ONCE(q->ring->producer, q->prod_tail);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:284:6: note: expanded from macro 'WRITE_ONCE'
__u.__val; \
~~~ ^~~~~
1 warning generated.
The q->prod_tail assignment has a comma at the end, not a semi-colon.
Fix that so clang no longer warns and everything works as expected.
Fixes: c497176cb2 ("xsk: add Rx receive functions and poll support")
Link: https://github.com/ClangBuiltLinux/linux/issues/544
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit f8e6089820 ("netfilter: ctnetlink: Resolve conntrack
L3-protocol flush regression") introduced a regression in which deletion
of conntrack entries would fail because the L3 protocol information
is replaced by AF_UNSPEC. As a result the search for the entry to be
deleted would turn up empty due to the tuple used to perform the search
is now different from the tuple used to initially set up the entry.
For flushing the conntrack table we do however want to keep the option
for nfgenmsg->version to have a non-zero value to allow for newer
user-space tools to request treatment under the new behavior. With that
it is possible to independently flush tables for a defined L3 protocol.
This was introduced with the enhancements in in commit 59c08c69c2
("netfilter: ctnetlink: Support L3 protocol-filter on flush").
Older user-space tools will retain the behavior of flushing all tables
regardless of defined L3 protocol.
Fixes: f8e6089820 ("netfilter: ctnetlink: Resolve conntrack L3-protocol flush regression")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We rename the inline function msg_get_wrapped() to the more
comprehensible msg_inner_hdr().
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We increase the allocated headroom for the buffer copies to be
retransmitted. This eliminates the need for the lower stack levels
(UDP/IP/L2) to expand the headroom in order to add their own headers.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit a4dc70d46c ("tipc: extend link reset criteria for stale
packet retransmission") we made link retransmission failure events
dependent on the link tolerance, and not only of the number of failed
retransmission attempts, as we did earlier. This works well. However,
keeping the original, additional criteria of 99 failed retransmissions
is now redundant, and may in some cases lead to failure detection
times in the order of minutes instead of the expected 1.5 sec link
tolerance value.
We now remove this criteria altogether.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/proc/sys/net/ipv6/route/skip_notify_on_dev_down assumes given value to be
0 or 1. Use proc_dointvec_minmax instead of proc_dointvec.
Fixes: 7c6bb7d2fa ("net/ipv6: Add knob to skip DELROUTE message ondevice down")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 19e4e76806 ("ipv4: Fix raw socket lookup for local
traffic"), the dif argument to __raw_v4_lookup() is coming from the
returned value of inet_iif() but the change was done only for the first
lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex.
Fixes: 19e4e76806 ("ipv4: Fix raw socket lookup for local traffic")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Resolve conflict between d2912cb15b ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 500") removing the GPL disclaimer
and fe03d47456 ("Update my email address") which updates Jozsef
Kadlecsik's email.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When we perform an inexact match on FIB nodes via fib6_locate_1(), longer
prefixes will be preferred to shorter ones. However, it might happen that
a node, with higher fn_bit value than some other, has no valid routing
information.
In this case, we'll pick that node, but it will be discarded by the check
on RTN_RTINFO in fib6_locate(), and we might miss nodes with valid routing
information but with lower fn_bit value.
This is apparent when a routing exception is created for a default route:
# ip -6 route list
fc00:1::/64 dev veth_A-R1 proto kernel metric 256 pref medium
fc00:2::/64 dev veth_A-R2 proto kernel metric 256 pref medium
fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 pref medium
fe80::/64 dev veth_A-R1 proto kernel metric 256 pref medium
fe80::/64 dev veth_A-R2 proto kernel metric 256 pref medium
default via fc00:1::2 dev veth_A-R1 metric 1024 pref medium
# ip -6 route list cache
fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 expires 593sec mtu 1500 pref medium
fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 593sec mtu 1500 pref medium
# ip -6 route flush cache # node for default route is discarded
Failed to send flush request: No such process
# ip -6 route list cache
fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 586sec mtu 1500 pref medium
Check right away if the node has a RTN_RTINFO flag, before replacing the
'prev' pointer, that indicates the longest matching prefix found so far.
Fixes: 38fbeeeecc ("ipv6: prepare fib6_locate() for exception table")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 2b760fcf5c ("ipv6: hook up exception table to store dst
cache"), route exceptions reside in a separate hash table, and won't be
found by walking the FIB, so they won't be dumped to userspace on a
RTM_GETROUTE message.
This causes 'ip -6 route list cache' and 'ip -6 route flush cache' to
have no function anymore:
# ip -6 route get fc00:3::1
fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 539sec mtu 1400 pref medium
# ip -6 route get fc00:4::1
fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 536sec mtu 1500 pref medium
# ip -6 route list cache
# ip -6 route flush cache
# ip -6 route get fc00:3::1
fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 520sec mtu 1400 pref medium
# ip -6 route get fc00:4::1
fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 519sec mtu 1500 pref medium
because iproute2 lists cached routes using RTM_GETROUTE, and flushes them
by listing all the routes, and deleting them with RTM_DELROUTE one by one.
If cached routes are requested using the RTM_F_CLONED flag together with
strict checking, or if no strict checking is requested (and hence we can't
consistently apply filters), look up exceptions in the hash table
associated with the current fib6_info in rt6_dump_route(), and, if present
and not expired, add them to the dump.
We might be unable to dump all the entries for a given node in a single
message, so keep track of how many entries were handled for the current
node in fib6_walker, and skip that amount in case we start from the same
partially dumped node.
When a partial dump restarts, as the starting node might change when
'sernum' changes, we have no guarantee that we need to skip the same
amount of in-node entries. Therefore, we need two counters, and we need to
zero the in-node counter if the node from which the dump is resumed
differs.
Note that, with the current version of iproute2, this only fixes the
'ip -6 route list cache': on a flush command, iproute2 doesn't pass
RTM_F_CLONED and, due to this inconsistency, 'ip -6 route flush cache' is
still unable to fetch the routes to be flushed. This will be addressed in
a patch for iproute2.
To flush cached routes, a procfs entry could be introduced instead: that's
how it works for IPv4. We already have a rt6_flush_exception() function
ready to be wired to it. However, this would not solve the issue for
listing.
Versions of iproute2 and kernel tested:
iproute2
kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 5.1.0, patched
3.18 list + + + + + +
flush + + + + + +
4.4 list + + + + + +
flush + + + + + +
4.9 list + + + + + +
flush + + + + + +
4.14 list + + + + + +
flush + + + + + +
4.15 list
flush
4.19 list
flush
5.0 list
flush
5.1 list
flush
with list + + + + + +
fix flush + + + +
v7:
- Explain usage of "skip" counters in commit message (suggested by
David Ahern)
v6:
- Rebase onto net-next, use recently introduced nexthop walker
- Make rt6_nh_dump_exceptions() a separate function (suggested by David
Ahern)
v5:
- Use dump_routes and dump_exceptions from filter, ignore NLM_F_MATCH,
update test results (flushing works with iproute2 < 5.0.0 now)
v4:
- Split NLM_F_MATCH and strict check handling in separate patches
- Filter routes using RTM_F_CLONED: if it's not set, only return
non-cached routes, and if it's set, only return cached routes:
change requested by David Ahern and Martin Lau. This implies that
iproute2 needs a separate patch to be able to flush IPv6 cached
routes. This is not ideal because we can't fix the breakage caused
by 2b760fcf5c entirely in kernel. However, two years have passed
since then, and this makes it more tolerable
v3:
- More descriptive comment about expired exceptions in rt6_dump_route()
- Swap return values of rt6_dump_route() (suggested by Martin Lau)
- Don't zero skip_in_node in case we don't dump anything in a given pass
(also suggested by Martin Lau)
- Remove check on RTM_F_CLONED altogether: in the current UAPI semantic,
it's just a flag to indicate the route was cloned, not to filter on
routes
v2: Add tracking of number of entries to be skipped in current node after
a partial dump. As we restart from the same node, if not all the
exceptions for a given node fit in a single message, the dump will
not terminate, as suggested by Martin Lau. This is a concrete
possibility, setting up a big number of exceptions for the same route
actually causes the issue, suggested by David Ahern.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 2b760fcf5c ("ipv6: hook up exception table to store dst cache")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the next patch, we are going to add optional dump of exceptions to
rt6_dump_route().
Change the return code of rt6_dump_route() to accomodate partial node
dumps: we might dump multiple routes per node, and might be able to dump
only a given number of them, so fib6_dump_node() will need to know how
many routes have been dumped on partial dump, to restart the dump from the
point where it was interrupted.
Note that fib6_dump_node() is the only caller and already handles all
non-negative return codes as success: those become -1 to signal that we're
done with the node. If we fail, return 0, as we were unable to dump the
single route in the node, but we're not done with it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If fc_nh_id isn't set, we shouldn't try to match against it. This
actually matters just for the RTF_CACHE below (where this case is
already handled): if iproute2 gets a route exception and tries to
delete it, it won't reference it by fc_nh_id, even if a nexthop
object might be associated to the originating route.
Fixes: 5b98324ebe ("ipv6: Allow routes to use nexthop objects")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 08e814c9e8: as we
are preparing to fix listing and dumping of IPv6 cached routes, we
need to allow RTM_F_CLONED as a flag to match routes against while
dumping them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 4895c771c7 ("ipv4: Add FIB nexthop exceptions."), cached
exception routes are stored as a separate entity, so they are not dumped
on a FIB dump, even if the RTM_F_CLONED flag is passed.
This implies that the command 'ip route list cache' doesn't return any
result anymore.
If the RTM_F_CLONED is passed, and strict checking requested, retrieve
nexthop exception routes and dump them. If no strict checking is
requested, filtering can't be performed consistently: dump everything in
that case.
With this, we need to add an argument to the netlink callback in order to
track how many entries were already dumped for the last leaf included in
a partial netlink dump.
A single additional argument is sufficient, even if we traverse logically
nested structures (nexthop objects, hash table buckets, bucket chains): it
doesn't matter if we stop in the middle of any of those, because they are
always traversed the same way. As an example, s_i values in [], s_fa
values in ():
node (fa) #1 [1]
nexthop #1
bucket #1 -> #0 in chain (1)
bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4)
bucket #3 -> #0 in chain (5) -> #1 in chain (6)
nexthop #2
bucket #1 -> #0 in chain (7) -> #1 in chain (8)
bucket #2 -> #0 in chain (9)
--
node (fa) #2 [2]
nexthop #1
bucket #1 -> #0 in chain (1) -> #1 in chain (2)
bucket #2 -> #0 in chain (3)
it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2)
for "node #2": walking flattens all that.
It would even be possible to drop the distinction between the in-tree
(s_i) and in-node (s_fa) counter, but a further improvement might
advise against this. This is only as accurate as the existing tracking
mechanism for leaves: if a partial dump is restarted after exceptions
are removed or expired, we might skip some non-dumped entries.
To improve this, we could attach a 'sernum' attribute (similar to the
one used for IPv6) to nexthop entities, and bump this counter whenever
exceptions change: having a distinction between the two counters would
make this more convenient.
Listing of exception routes (modified routes pre-3.5) was tested against
these versions of kernel and iproute2:
iproute2
kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0
3.5-rc4 + + + + +
4.4
4.9
4.14
4.15
4.19
5.0
5.1
fixed + + + + +
v7:
- Move loop over nexthop objects to route.c, and pass struct fib_info
and table ID to it, not a struct fib_alias (suggested by David Ahern)
- While at it, note that the NULL check on fa->fa_info is redundant,
and the check on RTNH_F_DEAD is also not consistent with what's done
with regular route listing: just keep it for nhc_flags
- Rename entry point function for dumping exceptions to
fib_dump_info_fnhe(), and rearrange arguments for consistency with
fib_dump_info()
- Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle
one bucket at a time
- Expand commit message to describe why we can have a single "skip"
counter for all exceptions stored in bucket chains in nexthop objects
(suggested by David Ahern)
v6:
- Rebased onto net-next
- Loop over nexthop paths too. Move loop over fnhe buckets to route.c,
avoids need to export rt_fill_info() and to touch exceptions from
fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that
(suggested by David Ahern)
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the next patch, we're going to use rt_fill_info() to dump exception
routes upon RTM_GETROUTE with NLM_F_ROOT, meaning userspace is requesting
a dump and not a specific route selection, which in turn implies the input
interface is not relevant. Update rt_fill_info() to handle a NULL
flowinfo.
v7: If fl4 is NULL, explicitly set r->rtm_tos to 0: it's not initialised
otherwise (spotted by David Ahern)
v6: New patch
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This functionally reverts the check introduced by commit
e8ba330ac0 ("rtnetlink: Update fib dumps for strict data checking")
as modified by commit e4e92fb160 ("net/ipv4: Bail early if user only
wants prefix entries").
As we are preparing to fix listing of IPv4 cached routes, we need to
give userspace a way to request them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following patches add back the ability to dump IPv4 and IPv6 exception
routes, and we need to allow selection of regular routes or exceptions.
Use RTM_F_CLONED as filter to decide whether to dump routes or exceptions:
iproute2 passes it in dump requests (except for IPv6 cache flush requests,
this will be fixed in iproute2) and this used to work as long as
exceptions were stored directly in the FIB, for both IPv4 and IPv6.
Caveat: if strict checking is not requested (that is, if the dump request
doesn't go through ip_valid_fib_dump_req()), we can't filter on protocol,
tables or route types.
In this case, filtering on RTM_F_CLONED would be inconsistent: we would
fix 'ip route list cache' by returning exception routes and at the same
time introduce another bug in case another selector is present, e.g. on
'ip route list cache table main' we would return all exception routes,
without filtering on tables.
Keep this consistent by applying no filters at all, and dumping both
routes and exceptions, if strict checking is not requested. iproute2
currently filters results anyway, and no unwanted results will be
presented to the user. The kernel will just dump more data than needed.
v7: No changes
v6: Rebase onto net-next, no changes
v5: New patch: add dump_routes and dump_exceptions flags in filter and
simply clear the unwanted one if strict checking is enabled, don't
ignore NLM_F_MATCH and don't set filter_set if NLM_F_MATCH is set.
Skip filtering altogether if no strict checking is requested:
selecting routes or exceptions only would be inconsistent with the
fact we can't filter on tables.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
