Lenovo ThinkStation P620 is like other TRX40 boards, is equipped with
two USB audio cards.
USB device (17aa:104d) provides functionality for Internal Speaker and
Front Headset. It's UAC v2, so it supports insertion control (jack
detection). However, when trying to get the connector status of the
speaker, an error occurs:
[ 5.787405] usb 3-1: cannot get connectors status: req = 0x81, wValue = 0x200, wIndex = 0x1000, type = 0
Since the insertion control works perfectly for the headset, the error
for speaker is probably casued by connecting internally. So let's relax
the error for a bit if it's a speaker, and always reports it's connected.
USB device (17aa:1046) is for rear Line-in, Line-out and Microphone.
The insertion control works for all three jacks. However, there's an
Function Unit that doesn't work:
[ 5.905415] usb 3-6: cannot get ctl value: req = 0x83, wValue = 0xc00, wIndex = 0x1300, type = 4
[ 5.905418] usb 3-6: 19:0: cannot get min/max values for control 12 (id 19)
So turn off the FU to avoid the error.
Also, add specific card name for both devices, so userspace can easily
indentify both cards.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200803142612.17156-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As expected, this requires the same quirk as the SSL2+ in order for the
clock to sync. This was suggested by, and tested on an SSL2, by Dmitry.
Suggested-by: Dmitry <dpavlushko@gmail.com>
Signed-off-by: Laurence Tratt <laurie@tratt.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200621075005.52mjjfc6dtdjnr3h@overdrive.tratt.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
word "slave" in vmaster API. I chose the word "follower" at this time
since it seems fitting for the purpose.
Note that the word "master" is kept in API, since it refers rather to
audio master volume control.
Also, while we're at it, a typo in comments is corrected, too.
Link: https://lore.kernel.org/r/20200717154517.27599-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719151705.59624-1-grandmaster@al2klimov.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the recent inclusive terminology guidelines and replace the
word "blacklist" appropriately.
Only a comment fix, no functional changes.
Link: https://lore.kernel.org/r/20200714172631.25371-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add hw monitor volume control for POD HD500. The same change may
work for HD500X but I don't have it to test.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20200713152852.65832-1-anarsoul@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB MIDI driver has an error recovery mechanism to resubmit the URB in
the delayed timer handler, and this may race with the standard start /
stop operations. Although both start and stop operations themselves
don't race with each other due to the umidi->mutex protection, but
this isn't applied to the timer handler.
For fixing this potential race, the following changes are applied:
- Since the timer handler can't use the mutex, we apply the
umidi->disc_lock protection at each input stream URB submission;
this also needs to change the GFP flag to GFP_ATOMIC
- Add a check of the URB refcount and skip if already submitted
- Move the timer cancel call at disconnection to the beginning of the
procedure; this assures the in-flight timer handler is gone properly
before killing all pending URBs
Reported-by: syzbot+0f4ecfe6a2c322c81728@syzkaller.appspotmail.com
Reported-by: syzbot+5f1d24c49c1d2c427497@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200710160656.16819-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently syzkaller reported a UAF in LINE6 driver, and it's likely
because we call cancel_delayed_work() at the disconnect callback
instead of cancel_delayed_work_sync(). Let's use the correct one
instead.
Reported-by: syzbot+145012a46658ac00fc9e@syzkaller.appspotmail.com
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5hlfjr4gio.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
LINE6 drivers create stream URBs with a fixed pipe without checking
its validity, and this may lead to a kernel WARNING at the submission
when a malformed USB descriptor is passed.
For avoiding the kernel warning, perform the similar sanity checks for
each pipe type at creating a URB.
Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few places (except for ASoC) are left unconverted for the new
fallthrough pseudo keyword. Now replace them all.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200709111750.8337-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix W=1 warning. Variables are declared in a header file included from
multiple C files, replace by #defines as suggested by Takashi
sound/usb/line6/driver.h:70:18: warning: ‘SYSEX_EXTRA_SIZE’ defined
but not used [-Wunused-const-variable=]
70 | static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4;
| ^~~~~~~~~~~~~~~~
sound/usb/line6/driver.h:69:18: warning: ‘SYSEX_DATA_OFS’ defined but
not used [-Wunused-const-variable=]
69 | static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3;
| ^~~~~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200707184924.96291-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB Audio analyzer RTX6001 uses the same implicit feedback quirk
as other XMOS-based devices.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Tested-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/822f0f20-1886-6884-a6b2-d11c685cbafa@ivitera.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit f0bd62b640 ("ALSA: usb-audio: Improve frames size computation")
introduced a regression for devices which have playback endpoints with
bInterval > 1. Fix this by taking ep->datainterval into account.
Note that frame and fps are actually mean packet and packets per second
in the code introduces by the mentioned commit. This will be fixed in a
follow-up patch.
Fixes: f0bd62b640 ("ALSA: usb-audio: Improve frames size computation")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208353
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200629025934.154288-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The USB-audio mixer code holds a linked list of usb_mixer_elem_list,
and several operations are performed for each mixer element. A few of
them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2())
assume each mixer element being a usb_mixer_elem_info object that is a
subclass of usb_mixer_elem_list, cast via container_of() and access it
members. This may result in an out-of-bound access when a
non-standard list element has been added, as spotted by syzkaller
recently.
This patch adds a new field, is_std_info, in usb_mixer_elem_list to
indicate that the element is the usb_mixer_elem_info type or not, and
skip the access to such an element if needed.
Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com
Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051)
need a tiny delay after each class compliant request.
Otherwise the device might not be able to be recognized each times.
Signed-off-by: Chihhao Chen <chihhao.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud
Alpha S (0951:0x16ea) uses two interfaces, but only the second
interface contains the capture stream. This patch delays the
registration until the second interface appears.
Signed-off-by: Christoffer Nielsen <cn@obviux.dk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAOtG2YHOM3zy+ed9KS-J4HkZo_QGzcUG9MigSp4e4_-13r6B=Q@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the recent full-duplex support of implicit feedback streams, an
endpoint can be still running after closing the capture stream as long
as the playback stream with the sync-endpoint is running. In such a
state, the URBs are still be handled and they may call retire_data_urb
callback, which tries to transfer the data from the PCM buffer. Since
the PCM stream gets closed, this may lead to use-after-free.
This patch adds the proper clearance of the callback at stopping the
capture stream for addressing the possible UAF above.
Fixes: 10ce77e481 ("ALSA: usb-audio: Add duplex sound support for USB devices using implicit feedback")
Link: https://lore.kernel.org/r/20200616120921.12249-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the Line6 devices, the Rode Rodecaster Pro does not support
UAC2_CS_RANGE and only supports a sample rate of 48 kHz.
Tested against a Rode Rodecaster Pro.
Tested-by: Christopher Swenson <swenson@swenson.io>
Signed-off-by: Christopher Swenson <swenson@swenson.io>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ebdb9e72-9649-0b5e-b9b9-d757dbf26927@swenson.io
Signed-off-by: Takashi Iwai <tiwai@suse.de>
fix error "clock source 41 is not valid, cannot use"
[] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00
[] New USB device strings: Mfr=1, Product=2, SerialNumber=0
[] Product: DCD-1500RE
[] Manufacturer: D & M Holdings Inc.
[]
[] clock source 41 is not valid, cannot use
[] usbcore: registered new interface driver snd-usb-audio
Signed-off-by: Yick W. Tse <y_w_tse@yahoo.com.hk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This uses the same quirk as the Motu M2 and M4 to ensure the driver uses the
audio interface's clock. Tested on an SSL2+.
Signed-off-by: Laurence Tratt <laurie@tratt.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200612111807.dgnig6rwhmsl2bod@overdrive.tratt.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently USB-audio driver manages the auto-pm of the primary
interface although a card may consist of multiple interfaces.
This may leave the secondary and other interfaces left running
unnecessarily after the auto-suspend.
This patch allows the driver managing the auto-pm of all bundled
interfaces per card. The chip->pm_intf field is extended as
chip->intf[] to contain the array of assigned interfaces, and the
runtime-PM is performed to all those interfaces.
Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20200605064117.28504-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the open-code with the new QUIRK_DEVICE_PROFILE() macro for
simplicity.
Fixes: 0c5086f569 ("ALSA: usb-audio: Add vendor, product and profile name for HP Thunderbolt Dock")
Link: https://lore.kernel.org/r/20200608071513.570-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Thunderbolt Dock has two separate USB devices, one is for speaker
and one is for headset. Add names for them so userspace can apply UCM
settings.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200608062630.10806-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a USB-audio interface gets runtime-suspended via auto-pm feature,
the driver suspends all functionality and increment
chip->num_suspended_intf. Later on, when the system gets suspended to
S3, the driver increments chip->num_suspended_intf again, skips the
device changes, and sets the card power state to
SNDRV_CTL_POWER_D3hot. In return, when the system gets resumed from
S3, the resume callback decrements chip->num_suspended_intf. Since
this refcount is still not zero (it's been runtime-suspended), the
whole resume is skipped. But there is a small pitfall here.
The problem is that the driver doesn't restore the card power state
after this resume call, leaving it as SNDRV_CTL_POWER_D3hot. So,
even after the system resume finishes, the card instance still appears
as if it were system-suspended, and this confuses many ioctl accesses
that are blocked unexpectedly.
In details, we have two issues behind the scene: one is that the card
power state is changed only when the refcount becomes zero, and
another is that the prior auto-suspend check is kept in a boolean
flag. Although the latter problem is almost negligible since the
auto-pm feature is imposed only on the primary interface, but this can
be a potential problem on the devices with multiple interfaces.
This patch addresses those issues by the following:
- Replace chip->autosuspended boolean flag with chip->system_suspend
counter
- At the first system-suspend, chip->num_suspended_intf is recorded to
chip->system_suspend
- At system-resume, the card power state is restored when the
chip->num_suspended_intf refcount reaches to chip->system_suspend,
i.e. the state returns to the auto-suspended
Also, the patch fixes yet another hidden problem by the code
refactoring along with the fixes above: namely, when some resume
procedure failed, the driver left chip->num_suspended_intf that was
already decreased, and it might lead to the refcount unbalance.
In the new code, the refcount decrement is done after the whole resume
procedure, and the problem is avoided as well.
Fixes: 0662292aec ("ALSA: usb-audio: Handle normal and auto-suspend equally")
Reported-and-tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603153709.6293-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pioneer DJ DJM-900NXS2 is a widely used DJ mixer with 2 audio USB
interfaces. Both have a MIDI controller, 10 playback and 12 capture
channels. Audio endpoints are vendor-specific and 3 files need to be
patched. All playback and capture channels work fine with all supported
sample rates (44.1k, 48k, 96k). Patches are attached.
Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Link: https://lore.kernel.org/r/48ab19ff-3303-9bf8-ed0e-bcb31d8537eb@d-systems.ee
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As reported by kbuild test robot, mixer quirks for RME Babyface
Pro used plain integer instead of NULL.
Fixes: 3e8f3bd047 ("ALSA: usb-audio: RME Babyface Pro mixer patch")
Signed-off-by: Thomas Ebeling <penguins@bollie.de>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200529173248.zzawijfvw73kzjxt@bollie.ca9.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices,
a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC
(USB ID 0414:a000). The latter serves solely for the headphone output
on the front panel while the former serves for the rest I/Os (mostly
for the I/Os in the rear panel but also including the front mic).
Both chips do work more or less with the unmodified USB-audio driver,
but there are a few glitches. The ALC1220-VB returns an error for an
inquiry to some jacks, as already seen on other TRX40-based mobos.
However this machine has a slightly incompatible configuration, hence
the existing mapping cannot be used as is.
Meanwhile the ESS chip seems working without any quirk. But since
both audio devices don't provide any specific names, both cards appear
as "USB-Audio", and it's quite confusing for users.
This patch is an attempt to overcome those issues:
- The specific mapping table for ALC1220-VB is provided, reducing the
non-working nodes and renaming the badly chosen controls.
The connector map isn't needed here unlike other TRX40 quirks.
- For both USB IDs (0414:a000 and 0414:a001), provide specific card
name strings, so that user-space can identify more easily; and more
importantly, UCM profile can be applied to each.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200526082810.29506-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Asus USB DAC is a USB type-C audio dongle for connecting to
the headset and headphone. The volume minimum value -23040 which
is 0xa600 in hexadecimal with the resolution value 1 indicates
this should be endianness issue caused by the firmware bug. Add
a volume quirk to fix the volume control problem.
Also fixes this warning:
Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
[5] FU [Headset Capture Volume] ch = 1, val = -23040/0/1
Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
[7] FU [Headset Playback Volume] ch = 1, val = -23040/0/1
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200526062613.55401-1-chiu@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For USB sound devices using implicit feedback the endpoint used for
this feedback should be able to be opened twice, once for required
feedback and second time for audio data. This way these devices can be
put in duplex audio mode. Since this only works if the settings of the
endpoint don't change a check is included for this.
This fixes bug 207023 ("MOTU M2 regression on duplex audio") and
should also fix bug 103751 ("M-Audio Fast Track Ultra usb audio device
will not operate full-duplex")
Fixes: c249177944 ("ALSA: usb-audio: add implicit fb quirk for MOTU M Series")
Signed-off-by: Erwin Burema <e.burema@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207023
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=103751
Link: https://lore.kernel.org/r/2410739.SCZni40SNb@alpha-wolf
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507192223.GA16335@embeddedor
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is another TRX40 based motherboard with ALC1220-VB USB-audio
that requires a static mapping table.
This motherboard also has a PCI device which advertises no codecs. The
PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD
vendor ID, don't blacklist for now in case other boards have a working
audio device with the same ssid.
alsa-info.sh report for this board:
http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70c
Signed-off-by: Andrew Oakley <andrew@adoakley.name>
Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At least POD HD500 uses message-based communication, both sides can
send messages. Add poll callback so application can wait for device
messages without using busy loop.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20200502193120.79115-3-anarsoul@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently line6 hwdep interface ignores O_NONBLOCK flag when
opening device and it renders it somewhat useless when using poll.
Check for O_NONBLOCK flag when opening device and don't block read()
if it is set.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20200502193120.79115-2-anarsoul@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apparently interface 1 is control interface akin to HD500X,
setting LINE6_CAP_CONTROL and choosing it as ctrl_if fixes
audio playback on POD HD500.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200425201115.3430-1-anarsoul@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The linked list entry from FIFO is peeked at
queue_pending_output_urbs() but the actual element pop-out is
performed outside the spinlock, and it's potentially racy.
Do delete the link at the right place inside the spinlock.
Fixes: 8fdff6a319 ("ALSA: snd-usb: implement new endpoint streaming model")
Link: https://lore.kernel.org/r/20200424074016.14301-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For computation of the the next frame size current value of fs/fps and
accumulated fractional parts of fs/fps are used, where values are stored
in Q16.16 format. This is quite natural for computing frame size for
asynchronous endpoints driven by explicit feedback, since in this case
fs/fps is a value provided by the feedback endpoint and it's already in
the Q format. If an error is accumulated over time, the device can
adjust fs/fps value to prevent buffer overruns/underruns.
But for synchronous endpoints the accuracy provided by these computations
is not enough. Due to accumulated error the driver periodically produces
frames with incorrect size (+/- 1 audio sample).
This patch fixes this issue by implementing a different algorithm for
frame size computation. It is based on accumulating of the remainders
from division fs/fps and it doesn't accumulate errors over time. This
new method is enabled for synchronous and adaptive playback endpoints.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200424022449.14972-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
