Currently, if we had a zero length mmio eventfd assigned on
KVM_MMIO_BUS. It will never be found by kvm_io_bus_cmp() since it
always compares the kvm_io_range() with the length that guest
wrote. This will cause e.g for vhost, kick will be trapped by qemu
userspace instead of vhost. Fixing this by using zero length if an
iodevice is zero length.
Cc: stable@vger.kernel.org
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch factors out core eventfd assign/deassign logic and leaves
the argument checking and bus index selection to callers.
Cc: stable@vger.kernel.org
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We only want zero length mmio eventfd to be registered on
KVM_FAST_MMIO_BUS. So check this explicitly when arg->len is zero to
make sure this.
Cc: stable@vger.kernel.org
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When entering the kernel at EL2, we fail to initialise the MDCR_EL2
register which controls debug access and PMU capabilities at EL1.
This patch ensures that the register is initialised so that all traps
are disabled and all the PMU counters are available to the host. When a
guest is scheduled, KVM takes care to configure trapping appropriately.
Cc: <stable@vger.kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Enable generic idle loop for ARM64, so can support for hlt/nohlt
command line options to override default idle loop behavior.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The test titled "Test software clock events have valid period values"
was setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test titled "Test number of exit event of a simple workload" was
setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix it by making it call perf_evlist__set_maps() instead of setting the
maps itself.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If evsels are added after maps are created, then they won't have any
maps propagated to them. Fix that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-12-git-send-email-adrian.hunter@intel.com
[ Moved the moving of propagate_maps() to the patch before, so that this
one does _just_ the one lile fix calling in add()]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subsequent fixes will need a function that just propagates maps for a
single evsel so factor it out.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-11-git-send-email-adrian.hunter@intel.com
[ Moved them to before perf_evlist__add() to avoid having to move it in the next patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since there is a function to set maps, perf_evlist__create_maps() should
use it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make perf_evlist__set_maps() more resilient by allowing for the
possibility that one or another of the maps isn't being changed and
therefore should not be "put".
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__propagate_maps() cannot easily tell if an evsel has its own
cpu map. To make that simpler, keep a copy of the PMU cpu map and
adjust the propagation logic accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__propagate_maps() incorrectly assumes evsel->threads is NULL
before reassigning it, but it won't be NULL when perf_evlist__set_maps()
is used to set different (or NULL) maps. Thus thread_map__put must be
used, which works even if evsel->threads is NULL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit d49e469507 ("perf evsel: Add a backpointer to the evlist a
evsel is in") updated perf_evlist__add() but not
perf_evlist__splice_list_tail().
This illustrates that it is better if perf_evlist__splice_list_tail()
calls perf_evlist__add() instead of duplicating the logic, so do that.
This will also simplify a subsequent fix for propagating maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subsequent patches will need to call perf_evlist__propagate_maps without
reference to a "target". Add evlist->has_user_cpus to record whether
the user has specified which cpus to target (and therefore whether that
list of cpus should override the default settings for a selected event
i.e. the cpu maps should be propagated)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The validation checks that the values that were just assigned, got
assigned i.e. the error can't ever happen. Subsequent patches will call
this code in places where errors are not being returned. Changing those
code paths to return this non-existent error is counter-productive, so
just remove it.
That in turn results in perf_evlist__set_maps not needing to return an
error, but callers aren't checking it either, so remove that too.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't need to check for NULL when "putting" evlist->maps and
evlist->threads because the "put" functions already do that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If evsel->cpus is to be reassigned then the current value must be "put",
which works even if it is NULL. Simplify the current logic by moving
the "put" next to the assignment.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A recent change in gcc caused this build failure:
/var/lib/jenkins/workspace/gcc_kernel_build/linux/drivers/misc/cxl/cxl.h:72:27:
error: ‘CXL_PSL_DLCNTL’ defined but not used [-Werror=unused-const-variable]
static const cxl_p1_reg_t CXL_PSL_DLCNTL = {0x0060};
Because of this gcc commit:
Commit 1bca8cbd0c68366f07277f98ce6963e10c2aa617 by mark
PR28901 -Wunused-variable ignores unused const initialised variables in C
12 years ago it was decided that -Wunused-variable shouldn't warn about
static const variables because some code used const static char rcsid[]
strings which were never used but wanted in the code anyway. But as the
bug points out this hides some real bugs. These days the usage of
rcsids is not very popular anymore. So this patch changes the default
to warn about unused static const variables in C with
-Wunused-variable. And it adds a new option -Wno-unused-const-variable
to turn this warning off. For C++ this new warning is off by default,
since const variables can be used as #defines in C++. New testcases for
the new defaults in C and C++ are included testing the new warning and
suppressing it with an unused attribute or using
-Wno-unused-const-variable. gcc/ChangeLog
The cxl driver uses static consts in place of #defines in some cases
for type safety, so this change causes the driver to fail to build on
new copilers as these constants are not all used in every file that
imports the header. Suppress the warning for this driver to return to
the old behaviour of -Wunused-variable.
Reported-by: Anton Blanchard <anton@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the first thing we do in cxl_probe is to grab a reference
on the pci device. Later on, we call device_register on our adapter.
In our remove path, we call device_unregister, but we never call
pci_dev_put. We therefore leak the device every time we do a
reflash.
device_register/unregister is sufficient to hold the reference.
Therefore, drop the call to pci_dev_get.
Here's why this is safe.
The proposed cxl_probe(pdev) calls cxl_adapter_init:
a) init calls cxl_adapter_alloc, which creates a struct cxl,
conventionally called adapter. This struct contains a
device entry, adapter->dev.
b) init calls cxl_configure_adapter, where we set
adapter->dev.parent = &dev->dev (here dev is the pci dev)
So at this point, the cxl adapter's device's parent is the PCI
device that I want to be refcounted properly.
c) init calls cxl_register_adapter
*) cxl_register_adapter calls device_register(&adapter->dev)
So now we're in device_register, where dev is the adapter device, and
we want to know if the PCI device is safe after we return.
device_register(&adapter->dev) calls device_initialize() and then
device_add().
device_add() does a get_device(). device_add() also explicitly grabs
the device's parent, and calls get_device() on it:
parent = get_device(dev->parent);
So therefore, device_register() takes a lock on the parent PCI dev,
which is what pci_dev_get() was guarding. pci_dev_get() can therefore
be safely removed.
Fixes: f204e0b8ce ("cxl: Driver code for powernv PCIe based cards for userspace access")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix a few small mistakes in the static key documentation and
delete an unneeded sentence.
Suggested-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150914171105.511e1e21@lwn.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit removes all CONFIG_.*{,_MODULE} in ACPI code, replacing it
with IS_ENABLED().
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds the missing CONFIG_ prefix to INTEL_SOC_DTS_THERMAL
macros.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
handful of patches to add more critical clocks on rockchip SoCs that
are affected by newly introduced gpio clock handling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Y9Y4
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple build fixes for drivers introduced in the merge window and a
handful of patches to add more critical clocks on rockchip SoCs that
are affected by newly introduced gpio clock handling"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rockchip: Add pclk_peri to critical clocks on RK3066/RK3188
clk: rockchip: add pclk_cpu to the list of rk3188 critical clocks
clk: rockchip: handle critical clocks after registering all clocks
clk: Hi6220: separately build stub clock driver
clk: h8s2678: Fix compile error
Pull devfreq updates for v4.3 from MyungJoo Ham.
* 'for-rafael' of https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq:
PM / devfreq: Fix incorrect type issue.
PM / devfreq: tegra: Update governor to use devfreq_update_stats()
PM / devfreq: comments for get_dev_status usage updated
PM / devfreq: drop comment about thermal setting max_freq
PM / devfreq: cache the last call to get_dev_status()
PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL)
PM / devfreq: exynos-ppmu: bit-wise operation bugfix.
PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
Conflicts:
drivers/devfreq/event/exynos-ppmu.c
With the previous patch, the installation method change from install
to rsync. There is no need to create subdir during test, the
default EMIT_TESTS is enough.
This patch essentially revert commit 84cbd9e4 ("selftests/exec: do not
install subdir as it is already created").
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The command of install could not handle the special files in exec
testcases, change the default rule to rsync to fix this.
The installation is unchanged after this commit.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use make's implict rule for building simple C programs.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change from = to += in order to allows the user to pass whatever
CFLAGS they wish(E.g. pass the proper headers and librareis
(popt.h and libpopt.so) in cross-compiling)
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
renamed jump_label directory to static_keys and failed to update
the Makefile, causing the selftests build to fail.
This commit fixes it by updating the Makefile with the new name
and also moves the entry into the correct position to keep the
list alphabetically sorted.
Fixes: 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds support for s390 to the seccomp selftests. Some improvements
were made to enhance the accuracy of failure reporting, and additional
tests were added to validate assumptions about the currently traced
syscall. Also adds early asserts for running on older kernels to avoid
noise when the seccomp syscall is not implemented.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Not all shells define a variable UID. This is a bash and zsh feature only.
In other shells, the UID variable is not defined, so here test command
expands to [ != 0 ] which is a syntax error.
Without this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh zram.sh
zram.sh: 8: [: !=: unexpected operator
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
With this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh ./zram.sh
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Again a result of the gpio-clock-liberation the rk3368 needs the
pclk_pd_pmu marked as critical, to boot successfully.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Pull CIFS fixes from Steve French:
"Two small cifs fixes"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] mount option sec=none not displayed properly in /proc/mounts
CIFS: fix type confusion in copy offload ioctl
Pull ARM fixes from Russell King:
"A number of fixes for the merge window, fixing a number of cases
missed when testing the uaccess code, particularly cases which only
show up with certain compiler versions"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8431/1: fix alignement of __bug_table section entries
arm/xen: Enable user access to the kernel before issuing a privcmd call
ARM: domains: add memory dependencies to get_domain/set_domain
ARM: domains: thread_info.h no longer needs asm/domains.h
ARM: uaccess: fix undefined instruction on ARMv7M/noMMU
ARM: uaccess: remove unneeded uaccess_save_and_disable macro
ARM: swpan: fix nwfpe for uaccess changes
ARM: 8429/1: disable GCC SRA optimization
'perf top' segfaults with following operation:
# perf top -e page-faults -p 11400 # 11400 never generates page-fault
Then on the resulting empty interface, press right key:
# ./perf top -e page-faults -p 11400
perf: Segmentation fault
-------- backtrace --------
./perf[0x535428]
/lib64/libc.so.6(+0x3545f)[0x7f0dd360745f]
./perf[0x531d46]
./perf(perf_evlist__tui_browse_hists+0x96)[0x5340d6]
./perf[0x44ba2f]
/lib64/libpthread.so.0(+0x81d0)[0x7f0dd49dc1d0]
/lib64/libc.so.6(clone+0x6c)[0x7f0dd36b90dc]
The bug resides in perf_evsel__hists_browse() that, in the above
circumstance browser->selection can be NULL, but code after
skip_annotation doesn't consider it.
This patch fix it by checking browser->selection before fetching
browser->selection->map.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1442226235-117265-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After 'commit 0b8ba4a2b6 ("KVM: fix checkpatch.pl errors in
kvm/coalesced_mmio.h")', the declaration of the two function will exceed 80
characters.
This patch reduces the TAPs to make each line in 80 characters.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The APIC LVTT register is MMIO mapped but the TSC_DEADLINE register is an
MSR. The write to the TSC_DEADLINE MSR is not serializing, so it's not
guaranteed that the write to LVTT has reached the APIC before the
TSC_DEADLINE MSR is written. In such a case the write to the MSR is
ignored and as a consequence the local timer interrupt never fires.
The SDM decribes this issue for xAPIC and x2APIC modes. The
serialization methods recommended by the SDM differ.
xAPIC:
"1. Memory-mapped write to LVT Timer Register, setting bits 18:17 to 10b.
2. WRMSR to the IA32_TSC_DEADLINE MSR a value much larger than current time-stamp counter.
3. If RDMSR of the IA32_TSC_DEADLINE MSR returns zero, go to step 2.
4. WRMSR to the IA32_TSC_DEADLINE MSR the desired deadline."
x2APIC:
"To allow for efficient access to the APIC registers in x2APIC mode,
the serializing semantics of WRMSR are relaxed when writing to the
APIC registers. Thus, system software should not use 'WRMSR to APIC
registers in x2APIC mode' as a serializing instruction. Read and write
accesses to the APIC registers will occur in program order. A WRMSR to
an APIC register may complete before all preceding stores are globally
visible; software can prevent this by inserting a serializing
instruction, an SFENCE, or an MFENCE before the WRMSR."
The xAPIC method is to just wait for the memory mapped write to hit
the LVTT by checking whether the MSR write has reached the hardware.
There is no reason why a proper MFENCE after the memory mapped write would
not do the same. Andi Kleen confirmed that MFENCE is sufficient for the
xAPIC case as well.
Issue MFENCE before writing to the TSC_DEADLINE MSR. This can be done
unconditionally as all CPUs which have TSC_DEADLINE also have MFENCE
support.
[ tglx: Massaged the changelog ]
Signed-off-by: Shaohua Li <shli@fb.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: <Kernel-team@fb.com>
Cc: <lenb@kernel.org>
Cc: <fenghua.yu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: stable@vger.kernel.org #v3.7+
Link: http://lkml.kernel.org/r/20150909041352.GA2059853@devbig257.prn2.facebook.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The recent ioapic cleanups changed the affinity setting in
setup_ioapic_dest() from a direct write to the hardware to the delayed
affinity setup via irq_set_affinity().
That results in a warning from chained_irq_exit():
WARNING: CPU: 0 PID: 5 at kernel/irq/migration.c:32 irq_move_masked_irq
[<ffffffff810a0a88>] irq_move_masked_irq+0xb8/0xc0
[<ffffffff8103c161>] ioapic_ack_level+0x111/0x130
[<ffffffff812bbfe8>] intel_gpio_irq_handler+0x148/0x1c0
The reason is that irq_set_affinity() does not write directly to the
hardware. It marks the affinity setting as pending and executes it
from the next interrupt. The chained handler infrastructure does not
take the irq descriptor lock for performance reasons because such a
chained interrupt is not visible to any interfaces. So the delayed
affinity setting triggers the warning in irq_move_masked_irq().
Restore the old behaviour by calling the set_affinity function of the
ioapic chip in setup_ioapic_dest(). This is safe as none of the
interrupts can be on the fly at this point.
Fixes: aa5cb97f14 'x86/irq: Remove x86_io_apic_ops.set_affinity and related interfaces'
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: jarkko.nikula@linux.intel.com
When restoring the system register state for an AArch32 guest at EL2,
writes to DACR32_EL2 may not be correctly synchronised by Cortex-A57,
which can lead to the guest effectively running with junk in the DACR
and running into unexpected domain faults.
This patch works around the issue by re-ordering our restoration of the
AArch32 register aliases so that they happen before the AArch64 system
registers. Ensuring that the registers are restored in this order
guarantees that they will be correctly synchronised by the core.
Cc: <stable@vger.kernel.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
- Fix timer interrupt injection after the rework
that went in during the merge window
- Reset the timer to zero on reboot
- Make sure the TCR_EL2 RES1 bits are really set to 1
- Fix a PSCI affinity bug for non-existing vcpus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=G02h
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/ARM changes for 4.3-rc2
- Fix timer interrupt injection after the rework
that went in during the merge window
- Reset the timer to zero on reboot
- Make sure the TCR_EL2 RES1 bits are really set to 1
- Fix a PSCI affinity bug for non-existing vcpus
If there is already some polling ongoing, it's impossible to disable the
polling, since as soon as somebody sets halt_poll_ns to 0, polling will
never stop, as grow and shrink are only handled if halt_poll_ns is != 0.
This patch fix it by reset vcpu->halt_poll_ns in order to stop polling
when polling is disabled.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Depending on CONFIG_ARM64_HW_AFDBM, we use either bit 57 or 51 of the
pte to represent PTE_WRITE. Given that bit 51 is reserved prior to
ARMv8.1, we can just use that bit regardless of the config option. That
also matches what happens if a kernel configured with ARM64_HW_AFDBM=y
is run on a CPU without the DBM functionality.
Cc: Julien Grall <julien.grall@citrix.com>
Tested-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The pte_modify() function with hardware AF/DBM enabled must transfer the
hardware dirty information to the software PTE_DIRTY bit. However, it
was setting this bit in newprot and the mask does not cover such bit.
This patch sets PTE_DIRTY on the original pte which will be preserved in
the returned value.
Fixes: 2f4b829c62 ("arm64: Add support for hardware updates of the access and dirty pte bits")
Cc: Julien Grall <julien.grall@citrix.com>
Tested-by: Julien Grall <julien.grall@citrix.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 2f4b829c62 ("arm64: Add support for hardware updates of the
access and dirty pte bits") introduced support for handling hardware
updates of the access flag and dirty status. The PTE is automatically
dirtied in hardware (if supported) by clearing the PTE_RDONLY bit when
the PTE_DBM/PTE_WRITE bit is set. The pte_hw_dirty() macro was added to
detect a hardware dirtied pte. The pte_dirty() macro checks for both
software PTE_DIRTY and pte_hw_dirty().
Functions like pte_modify() clear the PTE_RDONLY bit since it is meant
to be set in set_pte_at() when written to memory. In such cases,
pte_hw_dirty() would return true even though such pte is clean. This
patch changes pte_hw_dirty() to test the PTE_DBM/PTE_WRITE bit together
with PTE_RDONLY.
Fixes: 2f4b829c62 ("arm64: Add support for hardware updates of the access and dirty pte bits")
Reported-by: Julien Grall <julien.grall@citrix.com>
Tested-by: Julien Grall <julien.grall@citrix.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
If CMA is turned on and CMA size is set to zero, kernel should
behave as if CMA was not enabled at compile time.
Every dma allocation should check existence of cma area
before requesting memory.
Arm has done this by commit e464ef16c4 ("arm: dma-mapping: add
checking cma area initialized"), also do this for arm64.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
