Daniel noted[1] that commit d606dc9a63 ("drm: kirin: Add
register connect helper functions in drm init") was unnecessary
and incorrect, as drm_dev_register does register connectors for
us.
Thus, this patch reverts the change as suggested by Daniel.
[1]: https://lore.kernel.org/lkml/CAKMK7uHr5U-pPsxdQ4MpfK5v8iLjphDFug_3VTiUAf06nhS=yQ@mail.gmail.com/
Cc: Xu YiPing <xuyiping@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409004306.18541-1-john.stultz@linaro.org
Although it's not unexpected for drm_dp_check_act_status() to fail due
to DPCD read failures (as the hub may have just been unplugged
suddenly), timeouts are a bit more worrying as they either mean we need
a longer timeout value, or we aren't setting up payload allocations
properly. So, let's start printing errors on timeouts.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-5-lyude@redhat.com
Currently we only poll for an ACT up to 30 times, with a busy-wait delay
of 100µs between each attempt - giving us a timeout of 2900µs. While
this might seem sensible, it would appear that in certain scenarios it
can take dramatically longer then that for us to receive an ACT. On one
of the EVGA MST hubs that I have available, I observed said hub
sometimes taking longer then a second before signalling the ACT. These
delays mostly seem to occur when previous sideband messages we've sent
are NAKd by the hub, however it wouldn't be particularly surprising if
it's possible to reproduce times like this simply by introducing branch
devices with large LCTs since payload allocations have to take effect on
every downstream device up to the payload's target.
So, instead of just retrying 30 times we poll for the ACT for up to 3ms,
and additionally use usleep_range() to avoid a very long and rude
busy-wait. Note that the previous retry count of 30 appears to have been
arbitrarily chosen, as I can't find any mention of a recommended timeout
or retry count for ACTs in the DisplayPort 2.0 specification. This also
goes for the range we were previously using for udelay(), although I
suspect that was just copied from the recommended delay for link
training on SST devices.
Changes since v1:
* Use readx_poll_timeout() instead of open-coding timeout loop - Sean
Paul
Changes since v2:
* Increase poll interval to 200us - Sean Paul
* Print status in hex when we timeout waiting for ACT - Sean Paul
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-4-lyude@redhat.com
Just add a bit more line wrapping, get rid of some extraneous
whitespace, remove an unneeded goto label, and move around some variable
declarations. No functional changes here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
[this isn't a fix, but it's needed for the fix that comes after this]
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-3-lyude@redhat.com
This adds initial support for the NWL MIPI DSI Host controller found on
i.MX8 SoCs.
It adds support for the i.MX8MQ but the same IP can be found on
e.g. the i.MX8QXP.
It has been tested on the Librem 5 devkit using mxsfb.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Co-developed-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Tested-by: Robert Chiras <robert.chiras@nxp.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1cf5750f734e33d005564cd89c576eaf3c1c192b.1586427783.git.agx@sigxcpu.org
Most of the documentation was in an otherwise empty file, which was
probably just left from a previous clean-up effort. So move code and
documentation into a single file.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331081238.24749-1-tzimmermann@suse.de
Calling the VRAM helper's prepare_fb() helper now sets the plane's
fence object. This will be useful for PRIME support. VRAM helpers
don't support buffer sharing ATM, so for now there are no drivers
requiring this change.
v2:
* removed a TODO comment about buffer synchronization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331092740.29282-1-tzimmermann@suse.de
Generic fbdev emulation is a DRM client. Drivers should invoke the
setup function, but not depend on its success. Hence remove the return
value.
v3:
* document stricter requirements for call sequence
v2:
* warn if fbdev device has not been registered yet
* document the new behavior
* convert the existing warning to the new dev_ interface
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-11-tzimmermann@suse.de
Generic fbdev support is a DRM client. Set it up after registering
the new DRM device. Remove the error checks as the driver's probe
function should not depend on a DRM client's state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-10-tzimmermann@suse.de
Remove the error check from the fbdev setup function. The driver's
probe function should not depend on a DRM client's state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-9-tzimmermann@suse.de
Generic fbdev support is a DRM client. Set it up after fully registering
the new DRM device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-8-tzimmermann@suse.de
Generic fbdev support is a DRM client. Set it up after registering
the new DRM device. Remove the error checks as the driver's probe
function should not depend on a DRM client's state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-7-tzimmermann@suse.de
Remove the error check from the fbdev setup function. The function
will print a warning.
v2:
* fix subject line
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-6-tzimmermann@suse.de
Remove the error check from the fbdev setup function. The function
will print a warning.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-5-tzimmermann@suse.de
Generic fbdev support is a DRM client. Set it up after fully registering
the new DRM device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-4-tzimmermann@suse.de
Generic fbdev support is a DRM client. Remove the error check as the
driver's probe function should not depend on a DRM client's state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-3-tzimmermann@suse.de
Generic fbdev support is a DRM client. Set it up after registering
the new DRM device. Remove the error checks as the driver's probe
function should not depend on a DRM client's state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-2-tzimmermann@suse.de
The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants
with essentially the same name, LTK050H3146W and LTK050H3146W-A2.
They differ in their init sequence and mode details.
changes in v2:
- add display variants
changes in v3:
- fixed indentation and artifacts found by Sam
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408085317.2624599-2-heiko@sntech.de
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/e03e7106-0f22-99c4-ad21-b288e8990b5a@web.de
Drive-by fix I noticed the other day - drm_dp_mst_has_audio() only ever
made sense back when we still had to validate ports before accessing
them in order to (attempt to) avoid NULL dereferences. Since we have
proper reference counting that guarantees we always can safely access
the MST port, there's no use in keeping this function around as all it
does is validate the port pointer before checking the audio status.
Note - drm_dp_mst_port->has_audio is technically protected by
drm_device->mode_config.connection_mutex, since it's only ever updated
from drm_dp_mst_get_edid(). Additionally, we change the declaration for
port in struct intel_connector to be properly typed, so we can directly
access it.
Changes since v1:
* Change type of intel_connector->port in a separate patch - Sean Paul
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-2-lyude@redhat.com
The only reason for having this cast as void * before was because we
originally needed to use drm_dp_mst_get_port_validated() and friends in
order to (attempt to) safely access MST ports. However, we've since
improved how reference counting works with ports and mstbs such that we
can now rely on drm_dp_mst_port structs remaining in memory for as long
as the driver needs. This means we don't really need to cast this as
void* anymore, and can just access the struct directly.
We'll also need this for the next commit, so that we can remove
drm_dp_mst_port_has_audio().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-1-lyude@redhat.com
Lyude Paul wrote a very good intro to vblank here:
https://lore.kernel.org/dri-devel/faf63d8a9ed23c16af69762f59d0dca6b2bf085f.camel@redhat.com/T/#mce6480be738160e9d07c5d023e88fd78d7a06d27
Add this to the intro chapter in drm_vblank.c so others
can benefit from it too.
v2:
- Reworded to improve readability (Thomas)
v3:
- Added nice ascii drawing from Lyude (Lyude)
- Added referende to high-precision timestamp (Daniel)
- Improved grammar (Thomas)
- Combined it all and made kernel-doc happy
- Dropped any a-b, r-b do to the amount of changes
v4:
- Add intro to vblank interrupt (Liviu)
- Add historical reference for blanking (Alex)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Co-developed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-2-sam@ravnborg.org
It looks like that when we introduced the ability to handle multiple
down requests at once, we accidentally started dropping NAK replies -
causing sideband messages which got NAK'd to seemingly timeout and cause
all sorts of weirdness.
So, fix this by making sure we don't return from
drm_dp_mst_handle_down_rep() early, but instead treat NAKs like any
other message.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: fbc821c4a5 ("drm/mst: Support simultaneous down replies")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Wayne Lin <waynelin@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403200325.885628-1-lyude@redhat.com
Reviewed-by: Sean Paul <sean@poorly.run>
While we don't need this function to store an mstb anywhere for UP
requests since we process them asynchronously, we do need to make sure
that we don't try to write to **mstb for UP requests otherwise we'll
cause a NULL pointer deref:
RIP: 0010:drm_dp_get_one_sb_msg+0x4b/0x460 [drm_kms_helper]
Call Trace:
? vprintk_emit+0x16a/0x230
? drm_dp_mst_hpd_irq+0x133/0x1010 [drm_kms_helper]
drm_dp_mst_hpd_irq+0x133/0x1010 [drm_kms_helper]
? __drm_dbg+0x87/0x90 [drm]
? intel_dp_hpd_pulse+0x24b/0x400 [i915]
intel_dp_hpd_pulse+0x24b/0x400 [i915]
i915_digport_work_func+0xd6/0x160 [i915]
process_one_work+0x1a9/0x370
worker_thread+0x4d/0x3a0
kthread+0xf9/0x130
? process_one_work+0x370/0x370
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
So, fix this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: fbc821c4a5 ("drm/mst: Support simultaneous down replies")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <waynelin@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406193352.1245985-1-lyude@redhat.com
Reviewed-by: Sean Paul <sean@poorly.run>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6cf5a7-3f27-5425-4d6a-550a17bc51e3@web.de
Add missing documentation to fix following warning:
panel.c:303: warning: Function parameter or member 'bridge' not described in 'drm_panel_bridge_connector'
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328132025.19910-7-sam@ravnborg.org
Now that we've removed the last user of this callback, get rid of it and
drm_dp_destroy_connector().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-5-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
You can already trace the creation and destruction of connectors using
DRM, and we definitely don't need to be printing info messages on
connector hotplugs as well. So, get rid of these.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-4-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Pankaj Bharadiya started cleaning up the MST connector callbacks a while
ago, as I pointed out that they are the same across every driver and
don't serve much purpose. There was one callback that was left over
though from amdgpu, that we delayed removing due to not being completely
sure as to whether or not it was needed.
So, I've read through said callback and can confirm it's not at all
needed. Pretty much all of the work that is done in
dm_dp_destroy_mst_connector() can be done in
dm_dp_mst_connector_destroy(). Additionally, I've removed some bits that
didn't actually do anything:
* Removed DRM_INFO message we were printing, this shouldn't be info
level and there's more appropriate drm debugging flags that should be
used instead
* Removed amdgpu_dm_update_freesync_caps() - reading into this function,
it doesn't actually do anything important and I'm not sure why it was
ever being called here
* Stop clearing aconnector->dc_sink - this also doesn't do anything
* Stop clearing link settings in dc_link - this also doesn't do anything
* Also, use shorter variable
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-3-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.
Someone tell me which (if either) of the dotclock or vreresh is
correct?
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-6-ville.syrjala@linux.intel.com
Tested-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
For 3D buffers, virtio_gpu_gem_object_open notifies.
We can have the same behavior for dumb buffer.
v2: virtio_gpu_gem_object_open always notifies
v3: avoid boolean variable
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200401223039.2860-3-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
because the hardware limitation,The initial color depth must set to 32bpp
and must set the FB Offset of the display hardware to 128Byte alignment,
which is used to solve the display problem at 800x600 and 1440x900
resolution under 16bpp.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Gong junjie <gongjunjie2@huawei.com>
Acked-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1583466184-7060-4-git-send-email-tiantao6@hisilicon.com
The zte driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-23-tzimmermann@suse.de
The vkms driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-21-tzimmermann@suse.de
The virtgpu driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-20-tzimmermann@suse.de
The vc4 driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-19-tzimmermann@suse.de
The tilcdc driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-18-tzimmermann@suse.de
The tidss driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-17-tzimmermann@suse.de
The tegra driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-16-tzimmermann@suse.de
