Judgement whether to add an sw ip according to the harvest info.
v2: fix indentation (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The result of an expression consisting of a single relational operator is
already of the bool type and does not need to be evaluated explicitly.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a couple of syntax errors and removed one excess
parameter in the function documentations which lead
to kernel docs build warning.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For aldebaran, hardware will not clear error status automatically when
reading error status register, insteadly driver should set clear bit of
the error status register explicitly to clear error status.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bit 11 of GCEA_ERR_STATUS register is used to clear GCEA error
status.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original codes use ras status and kernl errno together in the same
function, which is a wrong code style.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If RAS is disabled through amdgpu_ras_enable kernel parameter,
we should quit the RAS initialization eariler to avoid initialization
of some RAS data structure such as sysfs etc.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Export the runtime-set "ras_hw_enabled" and
"ras_enabled" to debugfs, for debugging.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename,
ras_hw_supported --> ras_hw_enabled, and
ras_features --> ras_enabled,
to show that ras_enabled is a subset of
ras_hw_enabled, which itself is a subset
of the ASIC capability.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move ras_hw_supported into struct amdgpu_dev.
The dependency is:
struct amdgpu_ras <== struct amdgpu_dev <== ASIC,
read as "struct amdgpu_ras depends on struct
amdgpu_dev, which depends on the hardware."
This can be loosely understood as, "if RAS is
supported, which is property of the ASIC (struct
amdgpu_dev), then we can access struct
amdgpu_ras."
v2: Fix a typo: must binary AND in ternary cond
in amdgpu_ras.c
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove redundant ras->supported, as this value
is also stored in adev->ras_features.
Use adev->ras_features, as that supercedes "ras",
since the latter is its member.
The dependency goes like this:
ras <== adev->ras_features <== hw_supported,
and is read as "ras depends on ras_features, which
depends on hw_supported." The arrows show the flow
of information, i.e. the dependency update.
"hw_supported" should also live in "adev".
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update suspend register settings in Non-DPG mode.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add shader codes to explicitly clear specific SGPRs, such as
flat_scratch_lo, flat_scratch_hi and so on. And also correct the
allocation size of SGPRs in PGM_RSRC1.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The builtin size check isn't really the right thing for AMD
modifiers due to a couple of reasons:
1) In the format structs we don't do set any of the tilesize / blocks
etc. to avoid having format arrays per modifier/GPU
2) The pitch on the main plane is pixel_pitch * bytes_per_pixel even
for tiled ...
3) The pitch for the DCC planes is really the pixel pitch of the main
surface that would be covered by it ...
Note that we only handle GFX9+ case but we do this after converting
the implicit modifier to an explicit modifier, so on GFX9+ all
framebuffers should be checked here.
There is a TODO about DCC alignment, but it isn't worse than before
and I'd need to dig a bunch into the specifics. Getting this out in
a reasonable timeframe to make sure it gets the appropriate testing
seemed more important.
Finally as I've found that debugging addfb2 failures is a pita I was
generous adding explicit error messages to every failure case.
Fixes: f258907fdd ("drm/amdgpu: Verify bo size can fit framebuffer size on init.")
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise tiling modes that require the values form this field
(In particular _*_X) would be corrupted upon video decode.
Copied from the VCN v2 code.
Fixes: 99541f392b ("drm/amdgpu: add mc resume DPG mode for VCN3.0")
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change to 60s. This matches what we already do in virtualization.
Infinite timeout can lead to deadlocks in the kernel.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable vcn mgcg flag for picasso.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_modeset_lock_all() is not needed here, so it is replaced with
drm_modeset_lock(). The crtc list around which we are looping never
changes, therefore the only lock we need is to protect access to
crtc->state.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not needed here and has been added to the proper place
in the previous patch. This aligns with what we do for sdma 5.2.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add emit mem sync callback for sdma_v5_0
In amdgpu sync object test, three threads created jobs
to send GFX IB and SDMA IB in sequence. After the first
GFX thread joined, sometimes the third thread will reuse
the same physical page to store the SDMA IB. There will
be a risk that SDMA will read GFX IB in the previous physical
page. So it's better to flush the cache before commit sdma IB.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below htmldocs build warning:
"warning: Excess function parameter 'vm_context' description in 'amdgpu_vm_init'"
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The flags vf_reg_access_* may cause confusion,
rename the flags to make it more clear.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Polaris12 32bit ASIC needs a special MC firmware.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. add Aldebaran in virtualization detection list.
2. disable Aldebaran virtual display support as there is no GFX
engine in Aldebaran.
3. skip TMR loading if Aldebaran is in virtualizatin mode as it
shares the one host loaded.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is Aldebaran VF device ID, for virtualization support.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx ras now can be enabled by default in aldebaran
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
invoke callback function for mmhub ras fini
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was moved to hdp ras callbacks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add hdp block ras error query and reset support in
amdgpu ras error count query and reset interface
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
invoke hdp v4_0 ras init in gmc late_init phase
while ras fini in gmc sw_fini phase
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hdp v4_0 support ras features
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
implement hdp v4_0 ras functions, including
ras init/fini, query/reset_error_counter
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hdp ras init/fini are common functions that
can be shared among hdp generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
centralize all hdp ras operation to ras_funcs
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error code-path is missing a drm_gem_object_put call. Other
error code-paths are fine.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 1769152ac6 ("drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the function documentation, I removed the excess parameters,
described the undocumented ones, and fixed the syntax errors.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The runtime resume PM op disregards the return value from
amdgpu_device_resume(), masking errors for failed resumes at the PM
layer.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pavan Kumar Ramayanam <pavan.ramayanam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sriov gets suspend of IP block <dce_virtual> failed as return
value was not initialized.
v2: return 0 directly to align original code semantic before this
was broken out into a separate helper function instead of setting
initial values
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-fixes-5.13-2021-05-05:
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506033929.3875-1-alexander.deucher@amd.com
The builtin size check isn't really the right thing for AMD
modifiers due to a couple of reasons:
1) In the format structs we don't do set any of the tilesize / blocks
etc. to avoid having format arrays per modifier/GPU
2) The pitch on the main plane is pixel_pitch * bytes_per_pixel even
for tiled ...
3) The pitch for the DCC planes is really the pixel pitch of the main
surface that would be covered by it ...
Note that we only handle GFX9+ case but we do this after converting
the implicit modifier to an explicit modifier, so on GFX9+ all
framebuffers should be checked here.
There is a TODO about DCC alignment, but it isn't worse than before
and I'd need to dig a bunch into the specifics. Getting this out in
a reasonable timeframe to make sure it gets the appropriate testing
seemed more important.
Finally as I've found that debugging addfb2 failures is a pita I was
generous adding explicit error messages to every failure case.
Fixes: f258907fdd ("drm/amdgpu: Verify bo size can fit framebuffer size on init.")
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise tiling modes that require the values form this field
(In particular _*_X) would be corrupted upon video decode.
Copied from the VCN v2 code.
Fixes: 99541f392b ("drm/amdgpu: add mc resume DPG mode for VCN3.0")
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Tracking devices, process info and fence info using
/proc/pid/fdinfo
Signed-off-by: David M Nieto <David.Nieto@amd.com>
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426062701.39732-2-Roy.Sun@amd.com
Polaris12 32bit ASIC needs a special MC firmware.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This error code-path is missing a drm_gem_object_put call. Other
error code-paths are fine.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 1769152ac6 ("drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The runtime resume PM op disregards the return value from
amdgpu_device_resume(), masking errors for failed resumes at the PM
layer.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pavan Kumar Ramayanam <pavan.ramayanam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sriov gets suspend of IP block <dce_virtual> failed as return
value was not initialized.
v2: return 0 directly to align original code semantic before this
was broken out into a separate helper function instead of setting
initial values
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Starting with Vega the hardware supports concurrent flushes
of VMID which can be used to implement per process VMID
allocation.
But concurrent flushes are mutual exclusive with back to
back VMID allocations, fix this to avoid a VMID used in
two ways at the same time.
v2: don't set ring to NULL
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The wave's number per simd in aldebaran is changed to 8, so it is
impossible to use old algorithm to initiate all sgprs with one
threadgroup. The new algorithm firstly use three threadgroups to
initiate most sgprs simultaneously and then use another threadgroup with
4 waves to cover other uninitiated sgprs.
v2:
Add more description about the new algorithm to clear sgprs and add some
comment for shader binaries
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interface to remove address from fault filter ring by resetting
fault ring entry key, then future vm fault on the address will be
processed to recover.
Define fault key as atomic64_t type to use atomic read/set/cmpxchg key
to protect fault ring access by interrupt handler and interrupt deferred
work for vg20. Change fault->timestamp to 48-bit to share same uint64_t
with 8-bit fault->next, it is enough for 48bit IH timestamp.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes IH do not setup ring wptr overflow flag after wptr exceed
rptr. As a workaround, if IH rptr equals to wptr, ring is empty,
return true to indicate IH ring checkpoint is processed, IH ring drain
is finished.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable all ip's hw status to false before any hw_init.
Only set it to true until its hw_init is executed.
The old 5.9 branch has this change but somehow the 5.11 kernrel does
not have this fix.
Without this change, sriov tdr have gfx IB test fail.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Review-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge the two loops, loosen the restriction for big allocations.
This reduces the CPU overhead in the good case, but increases
it a bit under memory pressure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-and-Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP clear_vf_fw feature is outdated and has been removed.
Remove the related functions.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add socket/die information in RAS messages for platforms
that support query those information
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_socket_id is used to query socket id
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add flags AMD_CG_SUPPORT_SDMA_LS for Vangogh.
Start to open sdma ls from firmware version 70.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that we can start using drm_dbg_*() for
drm_dp_link_train_channel_eq_delay() and
drm_dp_lttpr_link_train_channel_eq_delay().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-7-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
So that we can start using drm_dbg_*() in
drm_dp_link_train_clock_recovery_delay().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-6-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is something that we've wanted for a while now: the ability to
actually look up the respective drm_device for a given drm_dp_aux struct.
This will also allow us to transition over to using the drm_dbg_*() helpers
for debug message printing, as we'll finally have a drm_device to reference
for doing so.
Note that there is one limitation with this - because some DP AUX adapters
exist as platform devices which are initialized independently of their
respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be
non-NULL until drm_dp_aux_register() has been called. We make sure to point
this out in the documentation for struct drm_dp_aux.
v3:
* Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Starting with Vega the hardware supports concurrent flushes
of VMID which can be used to implement per process VMID
allocation.
But concurrent flushes are mutual exclusive with back to
back VMID allocations, fix this to avoid a VMID used in
two ways at the same time.
v2: don't set ring to NULL
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused AMDGPU_GEM_CREATE_SHADOW flag.
Userspace is never allowed to use this.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove shadow bo related code as vm code is creating shadow bo
using proper API. Without shadow bo code, amdgpu_bo_create() is basically
a wrapper around amdgpu_bo_do_create(). So rename amdgpu_bo_do_create()
to amdgpu_bo_create().
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shadow BOs are only needed for vm code so call amdgpu_bo_create_shadow()
directly instead of depending on amdgpu_bo_create().
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused AMDGPU_VM_CONTEXT_GFX and AMDGPU_VM_CONTEXT_COMPUTE
flags.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently only way to create compute vm is through
amdgpu_vm_make_compute(). So vm_context isn't required
anymore for amdgpu_vm_init().
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Exposed amdgpu_bo_create_shadow() will be needed
for amdgpu_vm handling.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional changes, just cleaning up some leftovers and improve
documentation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.aiemd@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid the forward define, fix coding style, add documentation.
No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.aiemd@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extending this timeout will prevent IH from storm interrupts coming
from SDMA while a page fault is active. Currently, on Aldebaran,
handling that many interrupts can take a lot of CPU time
(up to 4 seconds).
This eventually causes timeouts in other tasks.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
aldebaran gfx ras is still under development
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable cgls to improve the runtime power efficiency.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add flags AMD_CG_SUPPORT_SDMA_MGCG for Vangogh.
Start to open sdma mgcg from firmware version 70.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add codes to check whether all SIMDs are covered, make sure that all
GPRs are initialized.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:685: warning: expecting prototype for cs_parser_fini(). Prototype was for amdgpu_cs_parser_fini() instead
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:1502: warning: expecting prototype for amdgpu_cs_wait_all_fence(). Prototype was for amdgpu_cs_wait_all_fences() instead
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:1656: warning: expecting prototype for amdgpu_cs_find_bo_va(). Prototype was for amdgpu_cs_find_mapping() instead
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jerome Glisse <glisse@freedesktop.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:169: warning: Function parameter or member 'sched_score' not described in 'amdgpu_ring_init'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:311: warning: expecting prototype for amdgpu_copy_ttm_mem_to_mem(). Prototype was for amdgpu_ttm_copy_mem_to_mem() instead
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jerome Glisse <glisse@freedesktop.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c:73: warning: expecting prototype for amdgpu_dummy_page_init(). Prototype was for amdgpu_gart_dummy_page_init() instead
drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c:96: warning: expecting prototype for amdgpu_dummy_page_fini(). Prototype was for amdgpu_gart_dummy_page_fini() instead
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:444: warning: Function parameter or member 'sched_score' not described in 'amdgpu_fence_driver_init_ring'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jerome Glisse <glisse@freedesktop.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c: In function ‘amdgpu_device_suspend’:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3733:6: warning: variable ‘r’ set but not used [-Wunused-but-set-variable]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add to amdgpu_amdkfd_fence.enable_signal callback, support
for svm_bo fence eviction.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To support svm bo eviction mechanism.
[how]
If the BO crated has AMDGPU_AMDKFD_CREATE_SVM_BO flag set,
enable_signal callback will be called inside amdgpu_evict_flags.
This also causes gutting of the BO by removing all placements,
so that TTM won't actually do an eviction. Instead it will discard
the memory held by the BO. This is needed for HMM migration to user
mode system memory pages.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add CREATE_SVM_BO define bit for SVM BOs.
Another define flag was moved to concentrate these
KFD type flags in one include file.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
As part of the SVM functionality, the eviction mechanism used for
SVM_BOs is different. This mechanism uses one eviction fence per prange,
instead of one fence per kfd_process.
[how]
A svm_bo reference to amdgpu_amdkfd_fence to allow differentiate between
SVM_BO or regular BO evictions. This also include modifications to set the
reference at the fence creation call.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use SVM API to restore page tables when retry fault and
compute context are enabled.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By default this timestamp is 32 bit counter. It gets
overflowed in around 10 minutes.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HMM migration alloc sizeof(struct page) on system memory for each VRAM
page, it is 1GB system memory reserved for 64GB VRAM. To avoid
application OOM, increase system memory used size based on VRAM size of
all GPUs, then application alloc memory will fail if system memory usage
reach the limit.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed to allow per-process XNACK mode selection in the SQ when
booting with XNACK off by default.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_vm_bo_update_mapping to update GPU page table to map or unmap
svm range system memory pages address to GPUs.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will be used by kfd to map svm range to GPU, because svm range does
not have amdgpu_bo and bo_va, cannot use amdgpu_bo_update interface, use
amdgpu vm update interface directly.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For larger range allocation, if hmm_range_fault return -EBUSY, set retry
timeout based on 1 second for every 512MB, this is safe timeout value.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the HMM get pages function from amdgpu_ttm and to amdgpu_mn. This
common function will be used by new svm APIs.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This shortcut is no longer needed with access managed properly by KFD.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM render node file handles are used for CPU mapping of BOs using mmap
by the Thunk. It uses the DRM render node of the GPU where the BO was
allocated.
DRM allows mmap access automatically when it creates a GEM handle for a
BO. KFD BOs don't have GEM handles, so KFD needs to manage access
manually. Use drm_vma_node_allow to allow user mode to mmap BOs allocated
with kfd_ioctl_alloc_memory_of_gpu through the DRM render node that was
used in the kfd_ioctl_acquire_vm call for the same GPU.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu needs the drm_priv to allow mmap
to access the BO through the corresponding file descriptor. The VM can
also be extracted from drm_priv, so drm_priv can replace the vm parameter
in the kfd2kgd interface.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran has a hw fix so no longer requires the workaround.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The buffer of SA bo will be used by many cases. So it's better
to invalidate the cache of indirect buffer allocated by SA before
commit the IB.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following issues with SDMA RAS error reporting:
1. Read the EDC_COUNTER2 register also to fetch error counts
for all sub-blocks in SDMA.
2. SDMA RAS on Aldebaran suports single-bit uncorrectable errors
only. So, report error count in UE count instead of CE count.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-By: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reset the RAS error count and error status registers after
reading to prevent over reporting error counts on Aldebaran.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-By: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2f055097da.
2f055097da was a driver workaround
when PSP firmware was not ready. Now the PSP fw is ready so we
revert this driver workaround.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dimgrey_cavefish has similar gc_10_3 ip with sienna_cichlid,
so follow its registers offset setting.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
resolve bug on aldebaran where gfx error counts will
print on driver load when there are no errors present
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
because "sscanf(str, "retire_page")" always return 0, if application use
the raw data for error injection, it always wrongly falls into "op ==
3". Change to use strstr instead.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In aldebaran, driver only needs to harvest SDP
RdRspStatus, WrRspStatus and first parity error
on RdRsp data. Check error type before harvest
error information.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDP RdRspStatus/WrRspStatus or first parity error on
RdRsp data can cause system fatal error in arcturus.
GPU will be freezed in such case.
Driver needs to harvest these error information before
reset the GPU. Check error type to avoid harvest normal
gcea/mmea information.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The tmz functions are verified on renoir chips as well. So enable it by
default.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When gfx wdt was configured to fatal_disable, the
timeout period should be configured to 0x0 (timeout
disabled)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the kmemdup() fails then this should return a negative error code
but it currently returns success
Fixes: b4a7db71ea ("drm/amdgpu: add per device user friendly xgmi events for vega20")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 55fa622fe6.
The regression caused by the original patch has been
cleared, thus introduce back the change.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we skipped loading MEC2 firmware separately
from MEC, then MEC2 will be running the same
firmware image. Copy the MEC version and feature
numbers into MEC2 version and feature numbers.
This is needed for things like GWS support, where
we rely on knowing what version of firmware is
running on MEC2. Leaving these MEC2 entries blank
breaks our ability to version-check enables and
workarounds.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ROCm user mode has acquired VMs from DRM file descriptors for as long
as it supported the upstream KFD. Legacy code to support older versions
of ROCm is not needed any more.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend current implementation of SG_TABLE construction method to
allow exportation of sub-buffers of a VRAM BO. This capability will
enable logical partitioning of a VRAM BO into multiple non-overlapping
sub-buffers. One example of this use case is to partition a VRAM BO
into two sub-buffers, one for SRC and another for DST.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add back the double-sscanf so that both decimal
and hexadecimal values could be read in, but this
time invert the scan so that hexadecimal format
with a leading 0x is tried first, and if that
fails, then try decimal format.
Also use a logical-AND instead of nesting double
if-conditional.
See commit "drm/amdgpu: Fix a bug for input with double sscanf"
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add ASPM support on polaris
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable ASPM on vega to save the power
without the performance hurt.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable ASPM on navi1x for the benifit of system power consumption
without performance hurt.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to config GECC feature here for sriov
Leave the host drvier to do the configuration job.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Imporve the kernel-doc for the RAS sysfs
interface. Fix the grammar, fix the context.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add bad_page_cnt_threshold to debugfs, an optional
file system used for debugging, for reporting
purposes only--it usually matches the size of
EEPROM but may be different depending on the
"bad_page_threshold" kernel module option.
The "bad_page_cnt_threshold" is a dynamically
computed value. It depends on three things: the
VRAM size; the size of the EEPROM (or the size
allocated to the RAS table therein); and the
"bad_page_threshold" module parameter. It is a
dynamically computed value, when the amdgpu module
is run, on which further parameters and logic
depend, and as such it is helpful to see the
dynamically computed value in debugfs.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix if (ret) --> if (!ret), a bug, for
"retire_page", which caused the kernel to recall
the method with *pos == end of file, and that
bounced back with error. On the first run, we
advanced *pos, but returned 0 back to fs layer,
also a bug.
Fix the logic of the check of the result of
amdgpu_reserve_page_direct()--it is 0 on success,
and non-zero on error, not the other way
around. This patch fixes this bug.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove double-sscanf to scan for %llu and 0x%llx,
as that is not going to work!
The %llu will consume the "0" in "0x" of your
input, and the hex value you think you're entering
will always be 0. That is, a valid hex value can
never be consumed.
On the other hand, just entering a hex number
without leading 0x will either be scanned as a
string and not match, for instance FAB123, or
the leading decimal portion is scanned as the
%llu, for instance 123FAB will be scanned as 123,
which is not correct.
Thus remove the first %llu scan and leave only the
%llx scan, removing the leading 0x since %llx can
scan either.
Addresses are usually always hex values, so this
suffices.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Xinhui Pan <xinhui.pan@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add emit mem sync callback for sdma_v5_2
In amdgpu sync object test, three threads created jobs
to send GFX IB and SDMA IB in sequence. After the first
GFX thread joined, sometimes the third thread will reuse
the same physical page to store the SDMA IB. There will
be a risk that SDMA will read GFX IB in the previous physical
page. So it's better to flush the cache before commit sdma IB.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to changes of HW memory model, we need to change Aldebaran
MTYPEs to meet HW changes.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This new interface passes both virtual and physical address
to PSP. It is backward compatible with old interface.
v2: use a function to simplify tmr physical address calc (Lijo)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_gmc_vram_pa and amdgpu_gmc_vram_cpu_pa
to simplify codes. No logic change.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add one function to calculate BO's GPU physical address.
And another function to calculate BO's CPU physical address.
v2: Use functions vs macros (Christian)
Use more proper function names (Christian)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
only output ras error status if an error bit is set or error counter is set
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
only output ras error status if an error bit is set
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
added support in RAS debugfs to add bad page for isolated page retirement testing
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable ras eeprom loading by default on aldebaran
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In event of RAS UE + warm reset, error counters shall be harvested and cleared on driver load
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
We use outbox interrupt that allows us to do the AUX via DMUB
Therefore, we need to add some irq source related definition
in the header files;
Signed-off-by: Jude Shih <shenshih@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ttm->num_pages is uint32. Hit overflow when << PAGE_SHIFT directly
Fixes: 230c079fdc ("drm/ttm: make num_pages uint32_t")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhub ras is always owned by gpu driver. ras_funcs
initialization shall be done at ip level, instead of
putting it in common gmc interface file
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
