Extend the perf branch sorting code to support sorting by in_tx
or abort_tx qualifiers. Also print out those qualifiers.
This also fixes up some of the existing sort key documentation.
We do not support no_tx here, because it's simply not showing
the in_tx flag.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379688044-14173-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support to perf stat to print the basic transactional execution statistics:
Total cycles, Cycles in Transaction, Cycles in aborted transsactions
using the in_tx and in_tx_checkpoint qualifiers.
Transaction Starts and Elision Starts, to compute the average transaction
length.
This is a reasonable overview over the success of the transactions.
Also support architectures that have a transaction aborted cycles
counter like POWER8. Since that is awkward to handle in the kernel
abstract handle both cases here.
Enable with a new --transaction / -T option.
This requires measuring these events in a group, since they depend on each
other.
This is implemented by using TM sysfs events exported by the kernel
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@infradead.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1377128846-977-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allows capture of raw_syscall:* events and analyzed at a later time.
v2: change -i option from inherit to input name for consistency with
other perf commands
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1377750593-48046-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can ask for all but a set of syscalls to be traced.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9j6hvap23qanyl96wx4mrj9k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Common arguments like thread id, CPU list, mmap pages, etc should be
consistent across perf commands.
v3: Updated man page
v2: rebased to latest core branch
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1377018945-21940-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To output all 'trace' output to a filename, just like 'strace -ofile'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6q1homkwoayhmoq64y5vhel6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to -e in strace, i.e. a comma separated list of syscall names
to trace.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5zku7q5wug3103k1dzn3yy63@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When measuring workloads the startup phase -- doing page faults, dynamic
linking, opening files -- is often very different from the rest of the
workload. Especially with smaller kernels and using counter
multiplexing this can give significant measurement errors.
Multiplexing assumes that the workload is mostly the same over longer
periods. But at startup there is typically some spike of activity which
is relatively short. If many groups are multiplexing the one group
seeing the spike, and which is then scaled up over the time to run all
groups, may see a significant error.
Also in general it's often not useful to measure the startup, because it
is so different from the rest.
One way around this is to use interval mode and discard the first
sample, but this can be awkward because interval mode doesn't support
intervals of less than 100ms, and also a useful interval is not
necessarily the same as a useful startup delay.
This patch adds a new --initial-delay / -D option to skip measuring for
the startup phase. The time can be specified in ms
Here's a simple example:
perf stat -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
3,721 page-faults
...
If we just wait 20 ms the number of page faults is 1/3 less:
perf stat -D 20 -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
2,823 page-faults
...
So we filtered out most of the startup noise from bash.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'S' event/group modifier to specify that the event value/s are
read by PERF_SAMPLE_READ sample type processing, instead of the period
value offered by lower layers.
There's additional behaviour change for 'S' modifier being specified on
event group:
Currently all the events within a group makes samples. If user now
specifies 'S' within group modifier, only the leader will trigger
samples. The rest of events in the group will have sampling disabled.
And same as for single events, values of all events within the group
(including leader) are read by PERF_SAMPLE_READ sample type processing.
Following example will create event group with cycles and cache-misses
events, setting the cycles as group leader and the only event to
actually sample. Both cycles and cache-misses event period values are
read by PERF_SAMPLE_READ sample type processing with PERF_FORMAT_GROUP
read format.
Example:
$ perf record -e '{cycles,cache-misses}:S' ls
...
$ perf report --group --show-total-period --stdio
...
# Samples: 36 of event 'anon group { cycles, cache-misses }'
# Event count (approx.): 12585593
#
# Overhead Period Command Shared Object Symbol
# .............. .............. ....... ................. ..........................
#
19.92% 1.20% 2505936 31 ls [kernel.kallsyms] [k] mark_held_locks
13.74% 0.47% 1729327 12 ls [kernel.kallsyms] [k] sched_clock_local
13.64% 23.72% 1716147 612 ls ld-2.14.90.so [.] check_match.10805
13.12% 23.22% 1650778 599 ls libc-2.14.90.so [.] _nl_intern_locale_data
11.24% 29.19% 1414554 753 ls [kernel.kallsyms] [k] sched_clock_cpu
8.50% 0.35% 1070150 9 ls [kernel.kallsyms] [k] check_chain_key
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-iyoinu3axi11mymwnh2b7fxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With programs with very large functions it can be useful to distinguish
the callgraph nodes on more than just function names. So for example if
you have multiple calls to the same function, it ends up being separate
nodes in the chain.
This patch adds a new key field to the callgraph options, that allows
comparing nodes on functions (as today, default) and addresses.
Longer term it would be nice to also handle src lines, but that would
need more changes and address is a reasonable proxy for it today.
I right now reference the global params, as there was no simple way to
register a params pointer.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-0uskktybf0e7wrnoi5e9b9it@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding option 'o' to allow sorting based on the input file number. By
default (without -o option) the output is sorted on baseline.
Also removing '+' sorting support from -c option, because it's not
needed anymore.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-l7dvhgt0azm7yiqg3fbn4dxw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For example, in an application with an expensive function implemented
with deeply nested recursive calls, the default call-graph presentation
is dominated by the different callchains within that function. By
ignoring these callees, we can collect the callchains leading into the
function and compactly identify what to blame for expensive calls.
For example, in this report the callers of garbage_collect() are
scattered across the tree:
$ perf report -d ruby 2>- | grep -m10 ^[^#]*[a-z]
22.03% ruby [.] gc_mark
--- gc_mark
|--59.40%-- mark_keyvalue
| st_foreach
| gc_mark_children
| |--99.75%-- rb_gc_mark
| | rb_vm_mark
| | gc_mark_children
| | gc_marks
| | |--99.00%-- garbage_collect
If we ignore the callees of garbage_collect(), its callers are coalesced:
$ perf report --ignore-callees garbage_collect -d ruby 2>- | grep -m10 ^[^#]*[a-z]
72.92% ruby [.] garbage_collect
--- garbage_collect
vm_xmalloc
|--47.08%-- ruby_xmalloc
| st_insert2
| rb_hash_aset
| |--98.45%-- features_index_add
| | rb_provide_feature
| | rb_require_safe
| | vm_call_method
Signed-off-by: Greg Price <price@mit.edu>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130623031720.GW22203@biohazard-cafe.mit.edu
Link: http://lkml.kernel.org/r/20130708115746.GO22203@biohazard-cafe.mit.edu
Cc: Fengguang Wu <fengguang.wu@intel.com>
[ remove spaces at beginning of line, reported by Fengguang Wu ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It no longer have any affect on the processing and is marked as obsolete
anyway.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-tvwyspiqr4getzfib2lw06ty@git.kernel.org
Link: http://lkml.kernel.org/r/1372307120-737-1-git-send-email-namhyung@kernel.org
[ combined patch removing the -f usage in various sub-commands, such as 'perf sched', etc, by Namhyung Kim ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The OUTPUT directory is wrongly determind leading to:
make[3]: *** No rule to make target `.../.build/perf/PERF-VERSION-FILE'. Stop.
Fixing this by using the generic approach in script/Makefile.include.
Signed-off-by: Robert Richter <robert.richter@calxeda.com>
Link: http://lkml.kernel.org/r/1367865614-30876-1-git-send-email-rric@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix having verbose build with V=0, e.g:
make V=0 -C tools/ perf
Signed-off-by: Robert Richter <robert.richter@calxeda.com>
Link: http://lkml.kernel.org/r/20130503134953.GU8356@rric.localhost
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --percent-limit option is for not showing small overhead entries in
the output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --percent-limit option is for not showing small overhead entries in
the output. Maybe we want to set a certain default value like 0.1.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is analysis, not analisys.
Reported-by: William Cohen <wcohen@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-s7476m0irq0naxkzd9iekbr3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This new command is a wrapper on top of perf record and perf report to
make it easier to configure for memory access profiling.
To record loads:
$ perf mem -t load rec .....
To record stores:
$ perf mem -t store rec .....
To get the report:
$ perf mem -t load rep
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-15-git-send-email-eranian@google.com
[ Fixed minor conflict with 66857b5 "Sort command-list.txt alphabetically" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record has a new option -W that enables weightened sampling.
Add sorting support in top/report for the average weight per sample and the
total weight sum. This allows to both compare relative cost per event
and the total cost over the measurement period.
Add the necessary glue to perf report, record and the library.
v2: Merge with new hist refactoring.
v3: Fix manpage. Remove value check.
Rename global_weight to weight and weight to local_weight.
v4: Readd sort keys to manpage
v5: Move weight to end
v6: Move weight to template
v7: Rename weight key.
Original patch from Andi modified by Stephane Eranian <eranian@google.com>
to include ONLY the weight supporting code and apply to pristine 3.8.0-rc4.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-6-git-send-email-eranian@google.com
[ committer note: changed to cope with fc5871ed and the hists_link perf test entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's sometimes useful to see undemangled raw symbol name for example
other tools using the perf output to do manipulation of binaries.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: William Cohen <wcohen@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=55571
Link: http://lkml.kernel.org/r/1364203098-17741-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the --per-core option to perf stat.
This option is used to aggregate system-wide counts
on a per physical core basis. On processors with
hyperthreading, this means counts of all HT threads
running on a physical core are aggregated.
This mode is useful to find imblance between physical
cores running an uniform workload. Cores are identified
by socket: S0-C1, means physical core 1 on socket 0. Note
that cores are identified using their physical core id,
thus their numbering may not be continuous.
Per core aggregation can be combined with interval printing:
# perf stat -a --per-core -I 1000 -e cycles sleep 1000
# time core cpus counts events
1.000090030 S0-C0 1 4,765,747 cycles
1.000090030 S0-C1 1 5,580,647 cycles
1.000090030 S0-C2 1 221,181 cycles
1.000090030 S0-C3 1 266,092 cycles
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-4-git-send-email-eranian@google.com
[ committer note: Remove parts already applied on 86ee6e1 to keep bisectability ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make it more obvious what this option does as suggested by Andi on
LKML.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following patch causes 'perf stat --repeat 0' to be interpreted as
'forever', displaying the stats for every run.
We act as if a single run was asked, and reset the stats in each
iteration. In this mode SIGINT is passed to perf to be able to stop the
loop with Ctrl+C.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130301180227.GA24385@ks398093.ip-192-95-24.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --skip-missing option for skipping symbols that cannot be used for
annotation. It's the case of kernel symbols that user doesn't have a
vmlinux image file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Basic implementation of perf annotate on GTK2. Currently only
shows first symbol. Add a new --gtk option to use it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When adding vmlinux file to build-id cache, it'd be fail since kallsyms
dso with a same build-id was already added by perf record.
So one needs to remove the kallsyms first to add vmlinux into the cache.
Add --update option for doing it at once.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds per-processor socket count aggregation for system-wide
mode measurements. This is a useful mode to detect imbalance between
sockets.
To enable this mode, use --aggr-socket in addition
to -a. (system-wide).
The output includes the socket number and the number of online
processors on that socket. This is useful to gauge the amount of
aggregation.
# ./perf stat -I 1000 -a --aggr-socket -e cycles sleep 2
# time socket cpus counts events
1.000097680 S0 4 5,788,785 cycles
2.000379943 S0 4 27,361,546 cycles
2.001167808 S0 4 818,275 cycles
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360161962-9675-3-git-send-email-eranian@google.com
[ committer note: Added missing man page entry based on above comments ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add '-g/--group' option for showing event groups. For simplicity it is
currently not compatible with other options.
$ perf evlist --group
{ref-cycles,cycles}
$ perf evlist
ref-cycles
cycles
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-20-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new printing mode for perf stat. It allows interval
printing. That means perf stat can now print event deltas at regular
time interval. This is useful to detect phases in programs.
The -I option enables interval printing. It expects an interval duration
in milliseconds. Minimum is 100ms. Once, activated perf stat prints
events deltas since last printout. All modes are supported.
$ perf stat -I 1000 -e cycles noploop 10
noploop for 10 seconds
# time counts events
1.000109853 2,388,560,546 cycles
2.000262846 2,393,332,358 cycles
3.000354131 2,393,176,537 cycles
4.000439503 2,393,203,790 cycles
5.000527075 2,393,167,675 cycles
6.000609052 2,393,203,670 cycles
7.000691082 2,393,175,678 cycles
The output format makes it easy to feed into a plotting program such as
gnuplot when the -I option is used in combination with the -x option:
$ perf stat -x, -I 1000 -e cycles noploop 10
noploop for 10 seconds
1.000084113,2378775498,cycles
2.000245798,2391056897,cycles
3.000354445,2392089414,cycles
4.000459115,2390936603,cycles
5.000565341,2392108173,cycles
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359460064-3060-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes a test is problematic for some reason and one wants to skip it,
for instance:
[root@sandy ~]# perf test
1: vmlinux symtab matches kallsyms : Ok
2: detect open syscall event : Ok
3: detect open syscall event on all cpus : Ok
4: read samples using the mmap interface : Ok
5: parse events tests : Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: function is_writable_pte not defined
Segmentation fault (core dumped)
So now we can use -s/--skip while the problematic tests are being fixed,
allowing us to test all the other entries:
[root@sandy ~]# perf test -s 5
1: vmlinux symtab matches kallsyms : Ok
2: detect open syscall event : Ok
3: detect open syscall event on all cpus : Ok
4: read samples using the mmap interface : Ok
5: parse events tests : Skip (user override)
6: x86 rdpmc test : Ok
7: Validate PERF_RECORD_* events & perf_sample fields : Ok
8: Test perf pmu format parsing : Ok
9: Test dso data interface : Ok
10: roundtrip evsel->name check : Ok
11: Check parsing of sched tracepoints fields : Ok
12: Generate and check syscalls:sys_enter_open event fields: Ok
13: struct perf_event_attr setup : Ok
14: Test matching and linking mutliple hists : Ok
15: Try 'use perf' in python, checking link problems : Ok
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracepoints used by the workqueue-stats script no longer exist so
trying to run the script results in:
# perf script record workqueue-stats
invalid or unsupported event: 'workqueue:workqueue_creation'
Run 'perf list' for a list of valid events
So remove the script until it can be reworked using the new workqueue
tracepoints.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/e7a7637d5df9df86887c3bff7683574665ec5360.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add description of sort keys to the perf-report document and also add
missing cpu and srcline keys to the command line help string.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
. perf build-id cache now can show DSOs present in a perf.data file that are
not in the cache, to integrate with build-id servers being put in place by
organizations such as Fedora.
. perf buildid-list -i an-elf-file-instead-of-a-perf.data is back showing its
build-id.
. No need to do feature checks when doing a 'make tags'
. Fix some 'perf test' errors and make them use the tracepoint evsel constructor.
. perf top now shares more of the evsel config/creation routines with 'record',
paving the way for further integration like 'top' snapshots, etc.
. perf top now supports DWARF callchains.
. perf evlist decodes sample_type and read_format, helping diagnose problems.
. Fix mmap limitations on 32-bit, fix from David Miller.
. perf diff fixes from Jiri Olsa.
. Ignore ABS symbols when loading data maps, fix from Namhyung Kim
. Hists improvements from Namhyung Kim
. Don't check configuration on make clean, from Namhyung Kim
. Fix dso__fprintf() print statement, from Stephane Eranian.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=r7FE
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
. perf build-id cache now can show DSOs present in a perf.data file that are
not in the cache, to integrate with build-id servers being put in place by
organizations such as Fedora.
. perf buildid-list -i an-elf-file-instead-of-a-perf.data is back showing its
build-id.
. No need to do feature checks when doing a 'make tags'
. Fix some 'perf test' errors and make them use the tracepoint evsel constructor.
. perf top now shares more of the evsel config/creation routines with 'record',
paving the way for further integration like 'top' snapshots, etc.
. perf top now supports DWARF callchains.
. perf evlist decodes sample_type and read_format, helping diagnose problems.
. Fix mmap limitations on 32-bit, fix from David Miller.
. perf diff fixes from Jiri Olsa.
. Ignore ABS symbols when loading data maps, fix from Namhyung Kim
. Hists improvements from Namhyung Kim
. Don't check configuration on make clean, from Namhyung Kim
. Fix dso__fprintf() print statement, from Stephane Eranian.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
Using struct perf_record_opts to specify how to configure the evsel
perf_event_attrs.
This gets top closer to record in the way it sets up evsels, with the
aim of sharing more and more to the point that both will be a single
utility.
In this direction top now uses the same callchain option parsing as
record and that brings DWARF callchains to top, something that was
already available for record.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u03o0bsrqcjgskciso3pvsjr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will allow to connect with services being put in place by distros such as
Fedora, where one can retrieve DSOs by their build-id.
Example usage:
for buildid in $(perf buildid-cache --missing perf.data | cut -d' ' -f1) ; do
echo "trying to get $buildid"
wget -q https://darkserver.fedoraproject.org/buildids/$buildid
cat $buildid ; echo
rm -f $buildid
done
Now its just a matter of some porcelain to get the details provided by such a
service, retrieve the file and use 'perf buildid-cache --add $FILE' to insert
it in the cache, then use 'perf report' or 'annotate' that will find the
required files in the cache.
More information about the darkserver service at:
https://darkserver.fedoraproject.org/
Cc: David Ahern <dsahern@gmail.com>
Cc: Frank Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kushal Das <kdas@redhat.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6fuktuiyjn4jykxmt7c9f7xq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems not very useful, because it's possible and event more convenient to
lookup related symbol by name. Also the output value for both 'baseline' and
'new' data is quite apparent from diff output.
And above all it complicates hist code factoring ;)
Ditching out PERF_HPP__DISPL column with related output functions.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20121206132228.GB1080@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Doing the same thing done in:
b059dee: perf tools: Don't check configuration on make clean
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-n2ni4riphpqxw7d6ziv1ndyc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf build process checks various system configuration on
invocation to make. But this is not needed just for cleaning.
To do that, move some of python related variables out of conditional
since 'clean' target needs them. Normal path should not be affected by
this.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1352867990-658-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without defining ARCH=arm, building perf for Android ARM will fail,
because it needs architecture specific files.
So add related relevant information to the android documentation.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1351518066-4791-1-git-send-email-js1304@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
