Allow arbitrary function calls from bpf function to another bpf function.
To recognize such set of bpf functions the verifier does:
1. runs control flow analysis to detect function boundaries
2. proceeds with verification of all functions starting from main(root) function
It recognizes that the stack of the caller can be accessed by the callee
(if the caller passed a pointer to its stack to the callee) and the callee
can store map_value and other pointers into the stack of the caller.
3. keeps track of the stack_depth of each function to make sure that total
stack depth is still less than 512 bytes
4. disallows pointers to the callee stack to be stored into the caller stack,
since they will be invalid as soon as the callee returns
5. to reuse all of the existing state_pruning logic each function call
is considered to be independent call from the verifier point of view.
The verifier pretends to inline all function calls it sees are being called.
It stores the callsite instruction index as part of the state to make sure
that two calls to the same callee from two different places in the caller
will be different from state pruning point of view
6. more safety checks are added to liveness analysis
Implementation details:
. struct bpf_verifier_state is now consists of all stack frames that
led to this function
. struct bpf_func_state represent one stack frame. It consists of
registers in the given frame and its stack
. propagate_liveness() logic had a premature optimization where
mark_reg_read() and mark_stack_slot_read() were manually inlined
with loop iterating over parents for each register or stack slot.
Undo this optimization to reuse more complex mark_*_read() logic
. skip_callee() logic is not necessary from safety point of view,
but without it mark_*_read() markings become too conservative,
since after returning from the funciton call a read of r6-r9
will incorrectly propagate the read marks into callee causing
inefficient pruning later
. mark_*_read() logic is now aware of control flow which makes it
more complex. In the future the plan is to rewrite liveness
to be hierarchical. So that liveness can be done within
basic block only and control flow will be responsible for
propagation of liveness information along cfg and between calls.
. tail_calls and ld_abs insns are not allowed in the programs with
bpf-to-bpf calls
. returning stack pointers to the caller or storing them into stack
frame of the caller is not allowed
Testing:
. no difference in cilium processed_insn numbers
. large number of tests follows in next patches
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Allow arbitrary function calls from bpf function to another bpf function.
Since the beginning of bpf all bpf programs were represented as a single function
and program authors were forced to use always_inline for all functions
in their C code. That was causing llvm to unnecessary inflate the code size
and forcing developers to move code to header files with little code reuse.
With a bit of additional complexity teach verifier to recognize
arbitrary function calls from one bpf function to another as long as
all of functions are presented to the verifier as a single bpf program.
New program layout:
r6 = r1 // some code
..
r1 = .. // arg1
r2 = .. // arg2
call pc+1 // function call pc-relative
exit
.. = r1 // access arg1
.. = r2 // access arg2
..
call pc+20 // second level of function call
...
It allows for better optimized code and finally allows to introduce
the core bpf libraries that can be reused in different projects,
since programs are no longer limited by single elf file.
With function calls bpf can be compiled into multiple .o files.
This patch is the first step. It detects programs that contain
multiple functions and checks that calls between them are valid.
It splits the sequence of bpf instructions (one program) into a set
of bpf functions that call each other. Calls to only known
functions are allowed. In the future the verifier may allow
calls to unresolved functions and will do dynamic linking.
This logic supports statically linked bpf functions only.
Such function boundary detection could have been done as part of
control flow graph building in check_cfg(), but it's cleaner to
separate function boundary detection vs control flow checks within
a subprogram (function) into logically indepedent steps.
Follow up patches may split check_cfg() further, but not check_subprogs().
Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs.
These restrictions can be relaxed in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit f371b304f1 ("bpf/tracing: allow user space to
query prog array on the same tp") introduced a perf
ioctl command to query prog array attached to the
same perf tracepoint. The commit introduced a
compilation error under certain config conditions, e.g.,
(1). CONFIG_BPF_SYSCALL is not defined, or
(2). CONFIG_TRACING is defined but neither CONFIG_UPROBE_EVENTS
nor CONFIG_KPROBE_EVENTS is defined.
Error message:
kernel/events/core.o: In function `perf_ioctl':
core.c:(.text+0x98c4): undefined reference to `bpf_event_query_prog_array'
This patch fixed this error by guarding the real definition under
CONFIG_BPF_EVENTS and provided static inline dummy function
if CONFIG_BPF_EVENTS was not defined.
It renamed the function from bpf_event_query_prog_array to
perf_event_query_prog_array and moved the definition from linux/bpf.h
to linux/trace_events.h so the definition is in proximity to
other prog_array related functions.
Fixes: f371b304f1 ("bpf/tracing: allow user space to query prog array on the same tp")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Error injection is sloppy and very ad-hoc. BPF could fill this niche
perfectly with it's kprobe functionality. We could make sure errors are
only triggered in specific call chains that we care about with very
specific situations. Accomplish this with the bpf_override_funciton
helper. This will modify the probe'd callers return value to the
specified value and set the PC to an override function that simply
returns, bypassing the originally probed function. This gives us a nice
clean way to implement systematic error injection for all of our code
paths.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Using BPF we can override kprob'ed functions and return arbitrary
values. Obviously this can be a bit unsafe, so make this feature opt-in
for functions. Simply tag a function with KPROBE_ERROR_INJECT_SYMBOL in
order to give BPF access to that function for error injection purposes.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit e87c6bc385 ("bpf: permit multiple bpf attachments
for a single perf event") added support to attach multiple
bpf programs to a single perf event.
Although this provides flexibility, users may want to know
what other bpf programs attached to the same tp interface.
Besides getting visibility for the underlying bpf system,
such information may also help consolidate multiple bpf programs,
understand potential performance issues due to a large array,
and debug (e.g., one bpf program which overwrites return code
may impact subsequent program results).
Commit 2541517c32 ("tracing, perf: Implement BPF programs
attached to kprobes") utilized the existing perf ioctl
interface and added the command PERF_EVENT_IOC_SET_BPF
to attach a bpf program to a tracepoint. This patch adds a new
ioctl command, given a perf event fd, to query the bpf program
array attached to the same perf tracepoint event.
The new uapi ioctl command:
PERF_EVENT_IOC_QUERY_BPF
The new uapi/linux/perf_event.h structure:
struct perf_event_query_bpf {
__u32 ids_len;
__u32 prog_cnt;
__u32 ids[0];
};
User space provides buffer "ids" for kernel to copy to.
When returning from the kernel, the number of available
programs in the array is set in "prog_cnt".
The usage:
struct perf_event_query_bpf *query =
malloc(sizeof(*query) + sizeof(u32) * ids_len);
query.ids_len = ids_len;
err = ioctl(pmu_efd, PERF_EVENT_IOC_QUERY_BPF, query);
if (err == 0) {
/* query.prog_cnt is the number of available progs,
* number of progs in ids: (ids_len == 0) ? 0 : query.prog_cnt
*/
} else if (errno == ENOSPC) {
/* query.ids_len number of progs copied,
* query.prog_cnt is the number of available progs
*/
} else {
/* other errors */
}
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Small overlapping change conflict ('net' changed a line,
'net-next' added a line right afterwards) in flexcan.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Various TCP control block fixes, including one that crashes with
SELinux, from David Ahern and Eric Dumazet.
2) Fix ACK generation in rxrpc, from David Howells.
3) ipvlan doesn't set the mark properly in the ipv4 route lookup key,
from Gao Feng.
4) SIT configuration doesn't take on the frag_off ipv4 field
configuration properly, fix from Hangbin Liu.
5) TSO can fail after device down/up on stmmac, fix from Lars Persson.
6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet.
7) Various SKB leak fixes in vhost/tun/tap (mostly observed as
performance problems). From Wei Xu.
8) mvpps's TX descriptors were not zero initialized, from Yan Markman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match()
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()
rxrpc: Fix the MAINTAINERS record
rxrpc: Use correct netns source in rxrpc_release_sock()
liquidio: fix incorrect indentation of assignment statement
stmmac: reset last TSO segment size after device open
ipvlan: Add the skb->mark as flow4's member to lookup route
s390/qeth: build max size GSO skbs on L2 devices
s390/qeth: fix GSO throughput regression
s390/qeth: fix thinko in IPv4 multicast address tracking
tap: free skb if flags error
tun: free skb in early errors
vhost: fix skb leak in handle_rx()
bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg()
bnxt_en: fix dst/src fid for vxlan encap/decap actions
bnxt_en: wildcard smac while creating tunnel decap filter
bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown
phylink: ensure we take the link down when phylink_stop() is called
sfp: warn about modules requiring address change sequence
sfp: improve RX_LOS handling
...
Daniel Borkmann says:
====================
pull-request: bpf 2017-12-02
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a compilation warning in xdp redirect tracepoint due to
missing bpf.h include that pulls in struct bpf_map, from Xie.
2) Limit the maximum number of attachable BPF progs for a given
perf event as long as uabi is not frozen yet. The hard upper
limit is now 64 and therefore the same as with BPF multi-prog
for cgroups. Also add related error checking for the sample
BPF loader when enabling and attaching to the perf event, from
Yonghong.
3) Specifically set the RLIMIT_MEMLOCK for the test_verifier_log
case, so that the test case can always pass and not fail in
some environments due to too low default limit, also from
Yonghong.
4) Fix up a missing license header comment for kernel/bpf/offload.c,
from Jakub.
5) Several fixes for bpftool, among others a crash on incorrect
arguments when json output is used, error message handling
fixes on unknown options and proper destruction of json writer
for some exit cases, all from Quentin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block fixes from Jens Axboe:
"A selection of fixes/changes that should make it into this series.
This contains:
- NVMe, two merges, containing:
- pci-e, rdma, and fc fixes
- Device quirks
- Fix for a badblocks leak in null_blk
- bcache fix from Rui Hua for a race condition regression where
-EINTR was returned to upper layers that didn't expect it.
- Regression fix for blktrace for a bug introduced in this series.
- blktrace cleanup for cgroup id.
- bdi registration error handling.
- Small series with cleanups for blk-wbt.
- Various little fixes for typos and the like.
Nothing earth shattering, most important are the NVMe and bcache fixes"
* 'for-linus' of git://git.kernel.dk/linux-block: (34 commits)
nvme-pci: fix NULL pointer dereference in nvme_free_host_mem()
nvme-rdma: fix memory leak during queue allocation
blktrace: fix trace mutex deadlock
nvme-rdma: Use mr pool
nvme-rdma: Check remotely invalidated rkey matches our expected rkey
nvme-rdma: wait for local invalidation before completing a request
nvme-rdma: don't complete requests before a send work request has completed
nvme-rdma: don't suppress send completions
bcache: check return value of register_shrinker
bcache: recover data from backing when data is clean
bcache: Fix building error on MIPS
bcache: add a comment in journal bucket reading
nvme-fc: don't use bit masks for set/test_bit() numbers
blk-wbt: fix comments typo
blk-wbt: move wbt_clear_stat to common place in wbt_done
blk-sysfs: remove NULL pointer checking in queue_wb_lat_store
blk-wbt: remove duplicated setting in wbt_init
nvme-pci: add quirk for delay before CHK RDY for WDC SN200
block: remove useless assignment in bio_split
null_blk: fix dev->badblocks leak
...
don't pass large struct bpf_reg_state by value.
Instead pass it by pointer.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
verifier knows how to trim paths that are known not to be
taken at run-time when register containing run-time constant
is compared with another constant.
It was done only for JEQ comparison.
Extend it to include JNE as well.
More cases can be added in the future.
before after
bpf_lb-DLB_L3.o 2270 2051
bpf_lb-DLB_L4.o 3682 3287
bpf_lb-DUNKNOWN.o 1110 1080
bpf_lxc-DDROP_ALL.o 27876 24980
bpf_lxc-DUNKNOWN.o 38780 34308
bpf_netdev.o 16937 15404
bpf_overlay.o 7929 7191
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
registers with pointers filled from stack were missing live_written marks
which caused liveness propagation to unnecessary mark more registers as
live_read and miss state pruning opportunities later on.
before after
bpf_lb-DLB_L3.o 2285 2270
bpf_lb-DLB_L4.o 3723 3682
bpf_lb-DUNKNOWN.o 1110 1110
bpf_lxc-DDROP_ALL.o 27954 27876
bpf_lxc-DUNKNOWN.o 38954 38780
bpf_netdev.o 16943 16937
bpf_overlay.o 7929 7929
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
when verifier hits an internal bug don't mark register R10==FP as uninit,
since it's read only register and it's not technically correct to let
verifier run further, since it may assume that R10 has valid auxiliary state.
While developing subsequent patches this issue was discovered,
though the code eventually changed that aux reg state doesn't have
pointers any more it is still safer to avoid clearing readonly register.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
let verifier print register and stack liveness information
into verifier log
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
fix incorrect stack state prints in print_verifier_state()
Fixes: 638f5b90d4 ("bpf: reduce verifier memory consumption")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
cgropu+bpf prog array has a maximum number of 64 programs.
Let us apply the same limit here.
Fixes: e87c6bc385 ("bpf: permit multiple bpf attachments for a single perf event")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The conditional kallsym hex printing used a special fixed-width '%lx'
output (KALLSYM_FMT) in preparation for the hashing of %p, but that
series ended up adding a %px specifier to help with the conversions.
Use it, and avoid the "print pointer as an unsigned long" code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I forgot to add a license on kernel/bpf/offload.c. Luckily I'm
still the only author so make it explicitly GPLv2.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
A previous commit changed the locking around registration/cleanup,
but direct callers of blk_trace_remove() were missed. This means
that if we hit the error path in setup, we will deadlock on
attempting to re-acquire the queue trace mutex.
Fixes: 1f2cac107c ("blktrace: fix unlocked access to init/start-stop/teardown")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull irq fixes from Thomas Glexiner:
- unbreak the irq trigger type check for legacy platforms
- a handful fixes for ARM GIC v3/4 interrupt controllers
- a few trivial fixes all over the place
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/matrix: Make - vs ?: Precedence explicit
irqchip/imgpdc: Use resource_size function on resource object
irqchip/qcom: Fix u32 comparison with value less than zero
irqchip/exiu: Fix return value check in exiu_init()
irqchip/gic-v3-its: Remove artificial dependency on PCI
irqchip/gic-v4: Add forward definition of struct irq_domain_ops
irqchip/gic-v3: pr_err() strings should end with newlines
irqchip/s3c24xx: pr_err() strings should end with newlines
irqchip/gic-v3: Fix ppi-partitions lookup
irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails
genirq: Track whether the trigger type has been set
Pull perf fixes from Ingo Molnar:
"Misc fixes: two PMU driver fixes and a memory leak fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix memory leak triggered by perf --namespace
perf/x86/intel/uncore: Add event constraint for BDX PCU
perf/x86/intel: Hide TSX events when RTM is not supported
Pull static key fix from Ingo Molnar:
"Fix a boot warning related to bad init ordering of the static keys
self-test"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Invoke jump_label_test() via early_initcall()
Pull timer updates from Thomas Gleixner:
- The final conversion of timer wheel timers to timer_setup().
A few manual conversions and a large coccinelle assisted sweep and
the removal of the old initialization mechanisms and the related
code.
- Remove the now unused VSYSCALL update code
- Fix permissions of /proc/timer_list. I still need to get rid of that
file completely
- Rename a misnomed clocksource function and remove a stale declaration
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
m68k/macboing: Fix missed timer callback assignment
treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
timer: Remove redundant __setup_timer*() macros
timer: Pass function down to initialization routines
timer: Remove unused data arguments from macros
timer: Switch callback prototype to take struct timer_list * argument
timer: Pass timer_list pointer to callbacks unconditionally
Coccinelle: Remove setup_timer.cocci
timer: Remove setup_*timer() interface
timer: Remove init_timer() interface
treewide: setup_timer() -> timer_setup() (2 field)
treewide: setup_timer() -> timer_setup()
treewide: init_timer() -> setup_timer()
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
s390: cmm: Convert timers to use timer_setup()
lightnvm: Convert timers to use timer_setup()
drivers/net: cris: Convert timers to use timer_setup()
drm/vc4: Convert timers to use timer_setup()
block/laptop_mode: Convert timers to use timer_setup()
net/atm/mpc: Avoid open-coded assignment of timer callback function
...
Noticed with a Clang build. This improves the readability of the ?:
expression, as it has lower precedence than the - expression. Show
explicitly that - is evaluated first.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171122205645.GA27125@beast
Daniel Borkmann says:
====================
pull-request: bpf 2017-11-23
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Several BPF offloading fixes, from Jakub. Among others:
- Limit offload to cls_bpf and XDP program types only.
- Move device validation into the driver and don't make
any assumptions about the device in the classifier due
to shared blocks semantics.
- Don't pass offloaded XDP program into the driver when
it should be run in native XDP instead. Offloaded ones
are not JITed for the host in such cases.
- Don't destroy device offload state when moved to
another namespace.
- Revert dumping offload info into user space for now,
since ifindex alone is not sufficient. This will be
redone properly for bpf-next tree.
2) Fix test_verifier to avoid using bpf_probe_write_user()
helper in test cases, since it's dumping a warning into
kernel log which may confuse users when only running tests.
Switch to use bpf_trace_printk() instead, from Yonghong.
3) Several fixes for correcting ARG_CONST_SIZE_OR_ZERO semantics
before it becomes uabi, from Gianluca. More specifically:
- Add a type ARG_PTR_TO_MEM_OR_NULL that is used only
by bpf_csum_diff(), where the argument is either a
valid pointer or NULL. The subsequent ARG_CONST_SIZE_OR_ZERO
then enforces a valid pointer in case of non-0 size
or a valid pointer or NULL in case of size 0. Given
that, the semantics for ARG_PTR_TO_MEM in combination
with ARG_CONST_SIZE_OR_ZERO are now such that in case
of size 0, the pointer must always be valid and cannot
be NULL. This fix in semantics allows for bpf_probe_read()
to drop the recently added size == 0 check in the helper
that would become part of uabi otherwise once released.
At the same time we can then fix bpf_probe_read_str() and
bpf_perf_event_output() to use ARG_CONST_SIZE_OR_ZERO
instead of ARG_CONST_SIZE in order to fix recently
reported issues by Arnaldo et al, where LLVM optimizes
two boundary checks into a single one for unknown
variables where the verifier looses track of the variable
bounds and thus rejects valid programs otherwise.
4) A fix for the verifier for the case when it detects
comparison of two constants where the branch is guaranteed
to not be taken at runtime. Verifier will rightfully prune
the exploration of such paths, but we still pass the program
to JITs, where they would complain about using reserved
fields, etc. Track such dead instructions and sanitize
them with mov r0,r0. Rejection is not possible since LLVM
may generate them for valid C code and doesn't do as much
data flow analysis as verifier. For bpf-next we might
implement removal of such dead code and adjust branches
instead. Fix from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
when the verifier detects that register contains a runtime constant
and it's compared with another constant it will prune exploration
of the branch that is guaranteed not to be taken at runtime.
This is all correct, but malicious program may be constructed
in such a way that it always has a constant comparison and
the other branch is never taken under any conditions.
In this case such path through the program will not be explored
by the verifier. It won't be taken at run-time either, but since
all instructions are JITed the malicious program may cause JITs
to complain about using reserved fields, etc.
To fix the issue we have to track the instructions explored by
the verifier and sanitize instructions that are dead at run time
with NOPs. We cannot reject such dead code, since llvm generates
it for valid C code, since it doesn't do as much data flow
analysis as the verifier does.
Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 9fd29c08e5 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO
semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way
the compiler generates optimized BPF code when checking boundaries of an
argument from C code. A typical example of this optimized code can be
generated using the bpf_perf_event_output helper when operating on variable
memory:
/* len is a generic scalar */
if (len > 0 && len <= 0x7fff)
bpf_perf_event_output(ctx, &perf_map, 0, buf, len);
110: (79) r5 = *(u64 *)(r10 -40)
111: (bf) r1 = r5
112: (07) r1 += -1
113: (25) if r1 > 0x7ffe goto pc+6
114: (bf) r1 = r6
115: (18) r2 = 0xffff94e5f166c200
117: (b7) r3 = 0
118: (bf) r4 = r7
119: (85) call bpf_perf_event_output#25
R5 min value is negative, either use unsigned or 'var &= const'
With this code, the verifier loses track of the variable.
Replacing arg5 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it
avoids this quite common case which leads to usability issues, and the
compiler generates code that the verifier can more easily test:
if (len <= 0x7fff)
bpf_perf_event_output(ctx, &perf_map, 0, buf, len);
or
bpf_perf_event_output(ctx, &perf_map, 0, buf, len & 0x7fff);
No changes to the bpf_perf_event_output helper are necessary since it can
handle a case where size is 0, and an empty frame is pushed.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 9fd29c08e5 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO
semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way
the compiler generates optimized BPF code when checking boundaries of an
argument from C code. A typical example of this optimized code can be
generated using the bpf_probe_read_str helper when operating on variable
memory:
/* len is a generic scalar */
if (len > 0 && len <= 0x7fff)
bpf_probe_read_str(p, len, s);
251: (79) r1 = *(u64 *)(r10 -88)
252: (07) r1 += -1
253: (25) if r1 > 0x7ffe goto pc-42
254: (bf) r1 = r7
255: (79) r2 = *(u64 *)(r10 -88)
256: (bf) r8 = r4
257: (85) call bpf_probe_read_str#45
R2 min value is negative, either use unsigned or 'var &= const'
With this code, the verifier loses track of the variable.
Replacing arg2 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it
avoids this quite common case which leads to usability issues, and the
compiler generates code that the verifier can more easily test:
if (len <= 0x7fff)
bpf_probe_read_str(p, len, s);
or
bpf_probe_read_str(p, len & 0x7fff, s);
No changes to the bpf_probe_read_str helper are necessary since
strncpy_from_unsafe itself immediately returns if the size passed is 0.
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 9c019e2bc4 ("bpf: change helper bpf_probe_read arg2 type to
ARG_CONST_SIZE_OR_ZERO") changed arg2 type to ARG_CONST_SIZE_OR_ZERO to
simplify writing bpf programs by taking advantage of the new semantics
introduced for ARG_CONST_SIZE_OR_ZERO which allows <!NULL, 0> arguments.
In order to prevent the helper from actually passing a NULL pointer to
probe_kernel_read, which can happen when <NULL, 0> is passed to the helper,
the commit also introduced an explicit check against size == 0.
After the recent introduction of the ARG_PTR_TO_MEM_OR_NULL type,
bpf_probe_read can not receive a pair of <NULL, 0> arguments anymore, thus
the check is not needed anymore and can be removed, since probe_kernel_read
can correctly handle a <!NULL, 0> call. This also fixes the semantics of
the helper before it gets officially released and bpf programs start
relying on this check.
Fixes: 9c019e2bc4 ("bpf: change helper bpf_probe_read arg2 type to ARG_CONST_SIZE_OR_ZERO")
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With the current ARG_PTR_TO_MEM/ARG_PTR_TO_UNINIT_MEM semantics, an helper
argument can be NULL when the next argument type is ARG_CONST_SIZE_OR_ZERO
and the verifier can prove the value of this next argument is 0. However,
most helpers are just interested in handling <!NULL, 0>, so forcing them to
deal with <NULL, 0> makes the implementation of those helpers more
complicated for no apparent benefits, requiring them to explicitly handle
those corner cases with checks that bpf programs could start relying upon,
preventing the possibility of removing them later.
Solve this by making ARG_PTR_TO_MEM/ARG_PTR_TO_UNINIT_MEM never accept NULL
even when ARG_CONST_SIZE_OR_ZERO is set, and introduce a new argument type
ARG_PTR_TO_MEM_OR_NULL to explicitly deal with the NULL case.
Currently, the only helper that needs this is bpf_csum_diff_proto(), so
change arg1 and arg3 to this new type as well.
Also add a new battery of tests that explicitly test the
!ARG_PTR_TO_MEM_OR_NULL combination: all the current ones testing the
various <NULL, 0> variations are focused on bpf_csum_diff, so cover also
other helpers.
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:
perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
$(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)
perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
$(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)
The now unused macros are also dropped from include/linux/timer.h.
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for removing more macros, pass the function down to the
initialization routines instead of doing it in macros.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since all callbacks have been converted, we can switch the core
prototype to "struct timer_list *" now too.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that all timer callbacks are already taking their struct timer_list
pointer as the callback argument, just do this unconditionally and remove
the .data field.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
This mechanically converts all remaining cases of ancient open-coded timer
setup with the old setup_timer() API, which is the first step in timer
conversions. This has no behavioral changes, since it ultimately just
changes the order of assignment to fields of struct timer_list when
finding variations of:
init_timer(&t);
f.function = timer_callback;
t.data = timer_callback_arg;
to be converted into:
setup_timer(&t, timer_callback, timer_callback_arg);
The conversion is done with the following Coccinelle script, which
is an improved version of scripts/cocci/api/setup_timer.cocci, in the
following ways:
- assignments-before-init_timer() cases
- limit the .data case removal to the specific struct timer_list instance
- handling calls by dereference (timer->field vs timer.field)
spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/setup_timer.cocci
@fix_address_of@
expression e;
@@
init_timer(
-&(e)
+&e
, ...)
// Match the common cases first to avoid Coccinelle parsing loops with
// "... when" clauses.
@match_immediate_function_data_after_init_timer@
expression e, func, da;
@@
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)
@match_immediate_function_data_before_init_timer@
expression e, func, da;
@@
(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
@match_function_and_data_after_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
... when != func = e2
when != da = e3
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)
@match_function_and_data_before_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)
... when != func = e2
when != da = e3
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
@r1 exists@
expression t;
identifier f;
position p;
@@
f(...) { ... when any
init_timer@p(\(&t\|t\))
... when any
}
@r2 exists@
expression r1.t;
identifier g != r1.f;
expression e8;
@@
g(...) { ... when any
\(t.data\|t->data\) = e8
... when any
}
// It is dangerous to use setup_timer if data field is initialized
// in another function.
@script:python depends on r2@
p << r1.p;
@@
cocci.include_match(False)
@r3@
expression r1.t, func, e7;
position r1.p;
@@
(
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
... when != func = e7
-t.function = func;
|
-t.function = func;
... when != func = e7
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
|
-init_timer@p(t);
+setup_timer(t, func, 0UL);
... when != func = e7
-t->function = func;
|
-t->function = func;
... when != func = e7
-init_timer@p(t);
+setup_timer(t, func, 0UL);
)
Signed-off-by: Kees Cook <keescook@chromium.org>
This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".
Done using the following semantic patch:
@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@
DEFINE_TIMER(_timer, _callback);
@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@
void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
{ ... }
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull printk updates from Petr Mladek:
- print the warning about dropped messages on consoles on a separate
line. It makes it more legible.
- one typo fix and small code clean up.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
added new line symbol after warning about dropped messages
printk: fix typo in printk_safe.c
printk: simplify no_printk()
This reverts commit bd601b6ada ("bpf: report offload info to user
space"). The ifindex by itself is not sufficient, we should provide
information on which network namespace this ifindex belongs to.
After considering some options we concluded that it's best to just
remove this API for now, and rework it in -next.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We are currently destroying the device offload state when device
moves to another net namespace. This doesn't break with current
NFP code, because offload state is not used on program removal,
but it's not correct behaviour.
Ignore the device unregister notifications on namespace move.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_prog_get_type() is identical to bpf_prog_get_type_dev(),
with false passed as attach_drv. Instead of keeping it as
an exported symbol turn it into static inline wrapper.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With TC shared block changes we can't depend on correct netdev
pointer being available in cls_bpf. Move the device validation
to the driver. Core will only make sure that offloaded programs
are always attached in the driver (or in HW by the driver). We
trust that drivers which implement offload callbacks will perform
necessary checks.
Moving the checks to the driver is generally a useful thing,
in practice the check should be against a switchdev instance,
not a netdev, given that most ASICs will probably allow using
the same program on many ports.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_target_prog seems long and clunky, rename it to prog_ifindex.
We don't want to call this field just ifindex, because maps
may need a similar field in the future and bpf_attr members for
programs and maps are unnamed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We are currently only allowing attachment of device-bound
cls_bpf and XDP programs. Make this restriction explicit in
the BPF offload code. This way we can potentially reuse the
ifindex field in the future.
Since XDP and cls_bpf programs can only be loaded by admin,
we can drop the explicit capability check from offload code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Offload state may get destroyed either because the device for which
it was constructed is going away, or because the refcount of bpf
program itself has reached 0. In both of those cases we will call
__bpf_prog_offload_destroy() to unlink the offload from the device.
We may in fact call it twice, which works just fine, but we should
make clear this is intended and caution others trying to extend the
function.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We always pass in blk_trace_bio_get_cgid(q, bio) to blk_add_trace_bio().
Since both are readily available in the function already, kill the
argument.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Rewrote commit message.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
