Function tracing callbacks expect to have the ftrace_ops that registered it
passed to them, not the address of the variable that holds the ftrace_ops
that registered it.
Use a mov instead of a lea to store the ftrace_ops into the parameter
of the function tracing callback.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20131113152004.459787f9@gandalf.local.home
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.8+
Add support for adreno 330. Not too much different, just a few
differences in initial configuration plus setting OCMEM base.
Userspace support is already in upstream mesa.
Note that the existing DT code is simply using the bindings from
downstream android kernel, to simplify porting of this driver to
existing devices. These do not constitute any committed/stable
DT ABI. The addition of proper DT bindings will be a subsequent
patch, at which point (as best as possible) I will try to support
either upstream bindings or what is found in downstream android
kernel, so that existing device DT files can be used.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add support for the new MDP5 display controller block. The mapping
between parts of the display controller and KMS is:
plane -> PIPE{RGBn,VIGn} \
crtc -> LM (layer mixer) |-> MDP "device"
encoder -> INTF /
connector -> HDMI/DSI/eDP/etc --> other device(s)
Unlike MDP4, it appears we can get by with a single encoder, rather
than needing a different implementation for DTV, DSI, etc. (Ie. the
register interface is same, just different bases.)
Also unlike MDP4, all the IRQs for other blocks (HDMI, DSI, etc) are
routed through MDP.
And finally, MDP5 has this "Shared Memory Pool" (called "SMP"), from
which blocks need to be allocated to the active pipes based on fetch
stride.
Signed-off-by: Rob Clark <robdclark@gmail.com>
The HDMI block is basically the same between older SoC's with mdp4
display controller, and newer ones with mdp5.
So mostly this consists of better abstracting out the different sets of
regulators, clks, etc. In particular, for regulators and clks we can
split it up by what is needed for hot plug detect to work, and what is
needed to light up the display.
Also, 8x74 has a new phy.. a very simple one, but split out into a
different mmio space. And with mdp5, the irq is shared with mdp, so we
don't directly register our own irq handler.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This can be shared between mdp4 and mdp5. Both use the same set of
parameters to describe the format to the hw.
Signed-off-by: Rob Clark <robdclark@gmail.com>
There are some little bits and pieces that mdp4 and mdp5 can share, so
move things around so that we can have both in a common parent
directory.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This adds the necessary configuration for the APQ8060A SoC (dual-core
krait + a320 gpu) as found on the bstem board.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a VRAM carveout that is used for systems which do not have an IOMMU.
The VRAM carveout uses CMA. The arch code must setup a CMA pool for the
device (preferrably in highmem.. a 256m-512m VRAM pool in lowmem is not
cool). The user can configure the VRAM pool size using msm.vram module
param.
Technically, the abstraction of IOMMU behind msm_mmu is not strictly
needed, but it simplifies the GEM code a bit, and will be useful later
when I add support for a2xx devices with GPUMMU, so I decided to keep
this part.
It appears to be possible to configure the GPU to restrict access to
addresses within the VRAM pool, but this is not done yet. So for now
the GPU will refuse to load if there is no sort of mmu. Once address
based limits are supported and tested to confirm that we aren't giving
the GPU access to arbitrary memory, this restriction can be lifted
Signed-off-by: Rob Clark <robdclark@gmail.com>
This got a bit broken with original patches when re-arranging things to
move dependencies on mach-msm inside #ifndef OF.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Pull parisc fix from Helge Deller:
"This patch fixes the kmap/kunmap implementation on parisc and finally
makes AIO work on parisc"
* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Ensure full cache coherency for kmap/kunmap
Pull libata fixes from Tejun Heo:
"Late fixes for libata. Nothing too interesting. Adding missing PM
callbacks to satat_sis and an additional PCI ID for ahci"
* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
sata_sis: missing PM support
ahci: add PCI ID for Marvell 88SE9170 SATA controller
pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.
v2: fix rebase
v3: hide behind module parameter
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.
v2: hide behind module parameter
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.
v2: put behind module parameter
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.
There's not much information still available on
r6xx, so r6xx is based on guess-work.
v2: put behind module parameter
v3: add IGP check
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is used to hard reset the asic. If a soft
reset is not able to reset things, a hard reset
can be used.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling this parameter enables pci config reset,
aka hard reset, which is a bus level chip reset.
In some cases this works more reliably than a soft
reset. Disabled by default.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helge Deller noted a few weeks ago problems with the AIO support on
parisc. This change is the result of numerous iterations on how best to
deal with this problem.
The solution adopted here is to provide full cache coherency in a
uniform manner on all parisc systems. This involves calling
flush_dcache_page() on kmap operations and flush_kernel_dcache_page() on
kunmap operations. As a result, the copy_user_page() and
clear_user_page() functions can be removed and the overall code is
simpler.
The change ensures that both userspace and kernel aliases to a mapped
page are invalidated and flushed. This is necessary for the correct
operation of PA8800 and PA8900 based systems which do not support
inequivalent aliases.
With this change, I have observed no cache related issues on c8000 and
rp3440. It is now possible for example to do kernel builds with "-j64"
on four way systems.
On systems using XFS file systems, the patch recently posted by Mikulas
Patocka to "fix crash using XFS on loopback" is needed to avoid a hang
caused by an uninitialized lock passed to flush_dcache_page() in the
page struct.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Helge Deller <deller@gmx.de>
It only contains one fix for a regression introduced with commit
e29a9e2ae1. Without this fix, we can not establish a p2p link in
target mode. Only initiator mode works.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=YkKJ
-----END PGP SIGNATURE-----
Merge tag 'nfc-fixes-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes
Samuel Ortiz <sameo@linux.intel.com> says:
"This is the first NFC fixes pull request for 3.13.
It only contains one fix for a regression introduced with commit
e29a9e2ae1. Without this fix, we can not establish a p2p link in
target mode. Only initiator mode works."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
LPT does have PCH refclk, but it's different form the IBX/CPT/PPT one
and doesn't use the same structs. It is wrong to have a message saying
that "LPT does not has PCH refclk" (sic). While at it, signal that we
only want this function on IBX/CPT/PPT by renaming it and adding a
WARN.
On HSW we also print "0 shared PLLs initialized", but we *do* have
shared PLLs on HSW (LCPLL, WRPLL, SPLL) and we *do* initialize them.
We just don't use "struct intel_shared_dpll". So remove the debug
message.
In the future we may want to rename all that "intel shared pll" code
to "ibx shared pll", but I'll leave this to another patch.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This fixes a bug which was causing rejections of valid GPU commands
from userspace.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's never allocated on systems without an ATOMBIOS or COMBIOS ROM.
Should fix an oops I encountered while resetting the GPU after a lockup
on my PowerBook with an RV350.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Commit 6d9252bd9a (clk: Add support for power of two type dividers)
merged in v3.6 added the _get_val function to convert a divisor value to
a register field value depending on the flags. However it used the type
u8 for the div field, causing divisors larger than 255 to be masked
and the resultant clock rate to be too high.
E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down
to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This
was masked to 238 (0xee) resulting in a frequency of 103.26KHz.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Properly zero the refcounts and crtc->ddi_pll_set so the previous HW
state doesn't affect the result of reading the current HW state.
This fixes WARNs about WRPLL refcount if we have an HDMI monitor on
HSW and then suspend/resume.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64379
Tested-by: Qingshuai Tian <qingshuai.tian@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to Art, we don't have a way to read back the state reliably at
runtime, through the control reg or the mailbox, at least not without risking
disabling it again. So drop the readout and checking on BDW.
v2: drop TODO comment (Paulo)
move POSTING_READ of control reg under HSW branch in disable (Paulo)
always report IPS as enabled on BDW (Paulo)
References: https://bugs.freedesktop.org/show_bug.cgi?id=71906
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mark functions as static because they are not used outside the file
drm/vmwgfx/vmwgfx_fence.c.
This eliminates the following warnings in drm/vmwgfx/vmwgfx_fence.c:
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c:274:6: warning: no previous prototype for ‘vmw_fences_perform_actions’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c:900:6: warning: no previous prototype for ‘vmw_fence_obj_add_action’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c:996:5: warning: no previous prototype for ‘vmw_event_fence_action_create’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Mark functions as static because they are not used outside the file
drm/vmwgfx/vmwgfx_buffer.c.
This eliminates the following warnings in drm/vmwgfx/vmwgfx_buffer.c:
drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c:520:16: warning: no previous prototype for ‘vmw_ttm_tt_create’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c:549:5: warning: no previous prototype for ‘vmw_invalidate_caches’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c:554:5: warning: no previous prototype for ‘vmw_init_mem_type’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c:592:6: warning: no previous prototype for ‘vmw_evict_flags’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Mark functions as static because they are not used outside the file
drm/vmwgfx/vmwgfx_kms.c.
This eliminates the following warnings in drm/vmwgfx/vmwgfx_kms.c:
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:43:6: warning: no previous prototype for ‘vmw_clip_cliprects’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:426:6: warning: no previous prototype for ‘vmw_framebuffer_surface_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:592:5: warning: no previous prototype for ‘vmw_framebuffer_surface_dirty’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:757:6: warning: no previous prototype for ‘vmw_framebuffer_dmabuf_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:943:5: warning: no previous prototype for ‘vmw_framebuffer_dmabuf_dirty’ [-Wmissing-prototypes]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1666:5: warning: no previous prototype for ‘vmw_du_update_layout’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Remove unused function ttm_write_lock_downgrade() from
drm/ttm/ttm_lock.c.
This eliminates the following warning in drm/ttm/ttm_lock.c:
drivers/gpu/drm/ttm/ttm_lock.c:189:6: warning: no previous prototype for ‘ttm_write_lock_downgrade’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Mark functions as static because they are not used outside the file
drm/ttm/ttm_bo_util.c.
This eliminates the following warnings in drm/ttm/ttm_bo_util.c:
drivers/gpu/drm/ttm/ttm_bo_util.c:190:5: warning: no previous prototype for ‘ttm_mem_reg_ioremap’ [-Wmissing-prototypes]
drivers/gpu/drm/ttm/ttm_bo_util.c:222:6: warning: no previous prototype for ‘ttm_mem_reg_iounmap’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Mark function as static because it is not used outside file
drm/ttm/ttm_bo.c.
This eliminates the following warning in drm/ttm/ttm_bo.c:
drivers/gpu/drm/ttm/ttm_bo.c:960:5: warning: no previous prototype for ‘ttm_bo_move_buffer’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
This was introduced in:
commit 7c4a395ff8
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Oct 9 19:17:56 2013 +0300
drm/i915: Don't re-compute pipe watermarks except for the affected pipe
and I missed fixing it in:
commit fec8cba306
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed Nov 27 11:10:26 2013 -0800
drm/i915: use crtc_htotal in watermark calculations to match fastboot v2
It's needed for ILK+ platforms to fastboot without crashing on a divide
by 0 after a DPMS on action.
Note: Ville mentioned in his review that this confusion seems to go
down to the original introduction of this code in
commit 801bcfffbb
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Fri May 31 10:08:35 2013 -0300
drm/i915: properly set HSW WM_PIPE registers
So it seems to have been missed both in the fastboot patch and in the
3d mode suppport (where only crtc_htotal reflects the real pipe
width).
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Add note based on Ville's review.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When a client looks up a ttm object, don't look it up through the device hash
table, but rather from the file hash table. That makes sure that the client
has indeed put a reference on the object, or in gem terms, has opened
the object; either using prime or using the global "name".
To avoid a performance loss, make sure the file hash table entries can be
looked up from under an RCU lock, and as a consequence, replace the rwlock
with a spinlock, since we never need to take it in read mode only anymore.
Finally add a ttm object lookup function for the device hash table, that is
intended to be used when we put a ref object on a base object or, in gem terms,
when we open the object.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Needed for some vm operations; most notably unmap_mapping_range() with
even_cows = 0.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This is illegal for at least two reasons:
1) While it may work on some platforms / iommus, obtaining page pointers from
mapped sg-lists is illegal, since the DMA API allows page pointer information
to be destroyed in the sg mapping process.
2) TTM has no way of determining the linear kernel map caching state of the
underlying pages. PTEs with conflicting caching state pointing to the same
pfn is not allowed.
TTM operations touching pages of imported sg-tables should be redirected through
the proper dma-buf operations.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
VM_PFNMAP is faster than VM_MIXEDMAP due to reduced page administration so
use it for shared maps where we don't have any Copy-On-Write pages. For
private maps, we continue to use VM_MIXEDMAP.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
misc fixes for nouveau, one more msi rearm, regression fix for old bioses
crash and leak fixes.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/nouveau/linux-2.6:
drm/nouveau/nouveau: fix memory leak in nouveau_crtc_page_flip()
drm/nouveau/bios: fix offset calculation for BMPv1 bioses
drm/nouveau: return offset of allocated notifier
drm/nouveau/bios: make jump conditional
drm/nvce/mc: fix msi rearm on GF114
drm/nvc0/gr: fix mthd data submission
drm/nouveau: populate master subdev pointer only when fully constructed
Just a revert (gen4 backlight seems a lost cause) and a tlb coherency fix
for bdw, plus the patch to sign up Jani for co-maintainer. Thanks to Ben
for taking care of -fixes while I've enjoyed a bit of vacation.
* tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel:
MAINTAINERS: Updates for drm/i915
Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM"
drm/i915/bdw: Flush system agent on gen8 also
When fastbooting, we read out the pipe timings early on, and then in a
panel fitted config, disable the fitter later. But we weren't updating
the pipe src h/w, which meant the mouse cursor was clipped to the
pfitted size rather than the native size set later. Fix that up so the
cursor is visible in the new mode.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Otherwise we won't check the state until the next DPMS transition, which
may never happen.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix a memory leak in the nouveau_crtc_page_flip() error handling path.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The only BIOS on record that needs the 14 offset has a bios major
version 2 but BMP version 1.01. Another bunch of BIOSes that need the 18
offset have BMP version 2.01 or 5.01 or higher. So instead of looking at the
bios major version, look at the BMP version. BIOSes with BMP version 0
do not contain a detectable script, so always return 0 for them.
See https://bugs.freedesktop.org/show_bug.cgi?id=68835
Reported-by: Mauro Molinari <mauromol@tiscali.it>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pablo Neira Ayuso says:
====================
The following patchset contains two patches:
* fix the IRC NAT helper which was broken when adding (incomplete) IPv6
support, from Daniel Borkmann.
* Refine the previous bugtrap that Jesper added to catch problems for the
usage of the sequence adjustment extension in IPVs in Dec 16th, it may
spam messages in case of finding a real bug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
