Christophe Roullier says:
====================
stmmac: add some fixes for stm32
For common stmmac:
- Add support to set CSR Clock range selection in DT
For stm32mpu:
- Glue codes to support magic packet
- Glue codes to support all PHY config :
PHY_MODE (MII,GMII, RMII, RGMII) and in normal,
PHY wo crystal (25Mhz),
PHY wo crystal (50Mhz), No 125Mhz from PHY config
For stm32mcu:
- Add Ethernet support for stm32h7
Changes in V3:
- Reverse for syscfg management because it is manage by these patches
https://lkml.org/lkml/2018/12/12/133https://lkml.org/lkml/2018/12/12/134https://lkml.org/lkml/2018/12/12/131https://lkml.org/lkml/2018/12/12/132
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Synopsys GMAC 4.10 is used. And Phy mode for eval and disco is RMII
with PHY SMSC LAN8742
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In Documentation stmmac.txt there is possibility to
fixed CSR Clock range selection with property clk_csr.
This patch add the management of this property
For example to use it, add in your ethernet node DT:
clk_csr = <3>;
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add properties to support all Phy config
PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz),
PHY wo crystal (50Mhz), No 125Mhz from PHY config.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update glue codes to support all PHY config on stm32mp157c
PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz),
PHY wo crystal (50Mhz), No 125Mhz from PHY config.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add glue codes to support magic packet on stm32mp157c
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
sctp: process the error returned from sctp_sock_migrate()
This patchset is to process the errs returned by sctp_auth_init_hmacs()
and sctp_bind_addr_dup() from sctp_sock_migrate(). And also fix a panic
caused by new ep->auth_hmacs was not set due to net->sctp.auth_enable
changed by sysctl before accepting an assoc.
====================
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New ep's auth_hmacs should be set if old ep's is set, in case that
net->sctp.auth_enable has been changed to 0 by users and new ep's
auth_hmacs couldn't be set in sctp_endpoint_init().
It can even crash kernel by doing:
1. on server: sysctl -w net.sctp.auth_enable=1,
sysctl -w net.sctp.addip_enable=1,
sysctl -w net.sctp.addip_noauth_enable=0,
listen() on server,
sysctl -w net.sctp.auth_enable=0.
2. on client: connect() to server.
3. on server: accept() the asoc,
sysctl -w net.sctp.auth_enable=1.
4. on client: send() asconf packet to server.
The call trace:
[ 245.280251] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 245.286872] RIP: 0010:sctp_auth_calculate_hmac+0xa3/0x140 [sctp]
[ 245.304572] Call Trace:
[ 245.305091] <IRQ>
[ 245.311287] sctp_sf_authenticate+0x110/0x160 [sctp]
[ 245.312311] sctp_sf_eat_auth+0xf2/0x230 [sctp]
[ 245.313249] sctp_do_sm+0x9a/0x2d0 [sctp]
[ 245.321483] sctp_assoc_bh_rcv+0xed/0x1a0 [sctp]
[ 245.322495] sctp_rcv+0xa66/0xc70 [sctp]
It's because the old ep->auth_hmacs wasn't copied to the new ep while
ep->auth_hmacs is used in sctp_auth_calculate_hmac() when processing
the incoming auth chunks, and it should have been done when migrating
sock.
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_auth_init_hmacs() is called only when ep->auth_enable is set.
It better to move up sctp_auth_init_hmacs() and remove auth_enable
check in it and check auth_enable only once in sctp_endpoint_init().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It should fail to create the new sk if sctp_bind_addr_dup() fails
when accepting or peeloff an association.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nfsd currently reports the NFSv3 dtpref FSINFO parameter
to be PAGE_SIZE, so NFS clients will typically ask for one
page of directory entries at a time. This is needlessly restrictive
as nfsd can handle larger replies easily.
Also, a READDIR request (but not a READDIRPLUS request) has the count
size clipped to PAGE_SIE, again unnecessary.
This patch lifts these limits so that larger readdir requests can be
used.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we receive a packet while deleting a VXLAN device, there's a chance
vxlan_rcv() is called at the same time as vxlan_dellink(). This is fine,
except that vxlan_dellink() should never ever touch stuff that's still in
use, such as the GRO cells list.
Otherwise, vxlan_rcv() crashes while queueing packets via
gro_cells_receive().
Move the gro_cells_destroy() to vxlan_uninit(), which runs after the RCU
grace period is elapsed and nothing needs the gro_cells anymore.
This is now done in the same way as commit 8e816df879 ("geneve: Use GRO
cells infrastructure.") originally implemented for GENEVE.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 58ce31cca1 ("vxlan: GRO support at tunnel layer")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rxrpc_disconnect_client_call() reads the call's connection ID protocol
value (call->cid) as part of that function's variable declarations. This
is bad because it's not inside the locked section and so may race with
someone granting use of the channel to the call.
This manifests as an assertion failure (see below) where the call in the
presumed channel (0 because call->cid wasn't set when we read it) doesn't
match the call attached to the channel we were actually granted (if 1, 2 or
3).
Fix this by moving the read and dependent calculations inside of the
channel_lock section. Also, only set the channel number and pointer
variables if cid is not zero (ie. unset).
This problem can be induced by injecting an occasional error in
rxrpc_wait_for_channel() before the call to schedule().
Make two further changes also:
(1) Add a trace for wait failure in rxrpc_connect_call().
(2) Drop channel_lock before BUG'ing in the case of the assertion failure.
The failure causes a trace akin to the following:
rxrpc: Assertion failed - 18446612685268945920(0xffff8880beab8c00) == 18446612685268621312(0xffff8880bea69800) is false
------------[ cut here ]------------
kernel BUG at net/rxrpc/conn_client.c:824!
...
RIP: 0010:rxrpc_disconnect_client_call+0x2bf/0x99d
...
Call Trace:
rxrpc_connect_call+0x902/0x9b3
? wake_up_q+0x54/0x54
rxrpc_new_client_call+0x3a0/0x751
? rxrpc_kernel_begin_call+0x141/0x1bc
? afs_alloc_call+0x1b5/0x1b5
rxrpc_kernel_begin_call+0x141/0x1bc
afs_make_call+0x20c/0x525
? afs_alloc_call+0x1b5/0x1b5
? __lock_is_held+0x40/0x71
? lockdep_init_map+0xaf/0x193
? lockdep_init_map+0xaf/0x193
? __lock_is_held+0x40/0x71
? yfs_fs_fetch_data+0x33b/0x34a
yfs_fs_fetch_data+0x33b/0x34a
afs_fetch_data+0xdc/0x3b7
afs_read_dir+0x52d/0x97f
afs_dir_iterate+0xa0/0x661
? iterate_dir+0x63/0x141
iterate_dir+0xa2/0x141
ksys_getdents64+0x9f/0x11b
? filldir+0x111/0x111
? do_syscall_64+0x3e/0x1a0
__x64_sys_getdents64+0x16/0x19
do_syscall_64+0x7d/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 45025bceef ("rxrpc: Improve management and caching of client connection objects")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported a NULL-ptr deref caused by that sched->init() in
sctp_stream_init() set stream->rr_next = NULL.
kasan: GPF could be caused by NULL-ptr deref or user memory access
RIP: 0010:sctp_sched_rr_dequeue+0xd3/0x170 net/sctp/stream_sched_rr.c:141
Call Trace:
sctp_outq_dequeue_data net/sctp/outqueue.c:90 [inline]
sctp_outq_flush_data net/sctp/outqueue.c:1079 [inline]
sctp_outq_flush+0xba2/0x2790 net/sctp/outqueue.c:1205
All sched info is saved in sout->ext now, in sctp_stream_init()
sctp_stream_alloc_out() will not change it, there's no need to
call sched->init() again, since sctp_outq_init() has already
done it.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: syzbot+4c9934f20522c0efd657@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- ARCv2 LLSC spinlocks have smp_mb() both before and after the LLSC
instructions, which is not required per lkmm ACQ/REL semantics.
smp_mb() is only needed _after_ lock and _before_ unlock.
So remove the extra barriers.
The reason they were there was mainly historical. At the time of
initial SMP Linux bringup on HS38 cores, I was too conservative,
given the fluidity of both hw and sw. The last attempt to ditch the
extra barrier showed some hackbench regression which is apparently
not the case now (atleast for LLSC case, read on...)
- EX based spinlocks (!CONFIG_ARC_HAS_LLSC) still needs the extra
smp_mb(), not due to lkmm, but due to some hardware shenanigans.
W/o that, hackbench triggers RCU stall splat so extra DMB is retained
!LLSC based systems are not realistic Linux sstem anyways so they can
afford to be a nit suboptimal ;-)
| [ARCLinux]# for i in (seq 1 1 5) ; do hackbench; done
| Running with 10 groups 400 process
| INFO: task hackbench:158 blocked for more than 10 seconds.
| Not tainted 4.20.0-00005-g96b18288a88e-dirty #117
| "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
| hackbench D 0 158 135 0x00000000
|
| Stack Trace:
| watchdog: BUG: soft lockup - CPU#3 stuck for 59s! [hackbench:469]
| Modules linked in:
| Path: (null)
| CPU: 3 PID: 469 Comm: hackbench Not tainted 4.20.0-00005-g96b18288a88e-dirty
|
| [ECR ]: 0x00000000 => Check Programmer's Manual
| [EFA ]: 0x00000000
| [BLINK ]: do_exit+0x4a6/0x7d0
| [ERET ]: _raw_write_unlock_irq+0x44/0x5c
- And while at it, remove the extar smp_mb() from EX based
arch_read_trylock() since the spin lock there guarantees a full
barrier anyways
- For LLSC case, hackbench threads improves with this patch (HAPS @ 50MHz)
---- before ----
|
| [ARCLinux]# for i in 1 2 3 4 5; do hackbench 10 thread; done
| Running with 10 groups 400 threads
| Time: 16.253
| Time: 16.445
| Time: 16.590
| Time: 16.721
| Time: 16.544
---- after ----
|
| [ARCLinux]# for i in 1 2 3 4 5; do hackbench 10 thread; done
| Running with 10 groups 400 threads
| Time: 15.638
| Time: 15.730
| Time: 15.870
| Time: 15.842
| Time: 15.729
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The race occurs in __mkroute_output() when 2 threads lookup a dst:
CPU A CPU B
find_exception()
find_exception() [fnhe expires]
ip_del_fnhe() [fnhe is deleted]
rt_bind_exception()
In rt_bind_exception() it will bind a deleted fnhe with the new dst, and
this dst will get no chance to be freed. It causes a dev defcnt leak and
consecutive dmesg warnings:
unregister_netdevice: waiting for ethX to become free. Usage count = 1
Especially thanks Jon to identify the issue.
This patch fixes it by setting fnhe_daddr to 0 in ip_del_fnhe() to stop
binding the deleted fnhe with a new dst when checking fnhe's fnhe_daddr
and daddr in rt_bind_exception().
It works as both ip_del_fnhe() and rt_bind_exception() are protected by
fnhe_lock and the fhne is freed by kfree_rcu().
Fixes: deed49df73 ("route: check and remove route cache when we get route")
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a72d785021 ("clk: ti: Prepare for remove of OF node name")
changed the code to use kasprintf() for provider->clkdm_name but also
changed the offset used later on by three. We don't need to change the
offset as we already have the extra three characters in the format for
kasprintf with "%pOFnxxx".
This caused the clocks with TI_CLK_CLKCTRL_COMPAT to have NULL
clk->clkdm_name for omap4 and 5. And null clkdm_name can cause module
reset, enable, and idle to fail.
The issue can also be seen also when enabling DEBUG for clkctrl.c
and then we start seeing "clock: could not associate" messages for
omap4 and 5 as the generated name is something like "l4_wkclkdm" instead
of "l4_wkup_clkdm" that's needed.
Let's fix the issue with a partial revert of commit a72d785021 ("clk:
ti: Prepare for remove of OF node name").
ALso note that in general code should not depend on the dts node names.
And the node names should be generic types like clock-domain in this case.
This could be fixed later by using separate compatible properties for the
clockdomains, or by adding soc_device_match() table with reg offsets
to the driver. But let's fix the regression first.
Fixes: a72d785021 ("clk: ti: Prepare for remove of OF node name")
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
of_clk_get_by_name() is using -1 for __of_clk_get() index. It will go
to of_parse_clkspec(), and be used for of_parse_phandle_with_args().
Here, if user doesn't specify clock name (= of_clk_get_by_name(np,
NULL)), this index is still -1, and of_parse_phandle_with_args() will
return -EINVAL (This index will be updated if if it had clock name).
clk_get_by_name(np, NULL) should work, then, default index should be 0
instead of -1. This patch fixes it.
Fixes: 4472287a3b ("clk: Introduce of_clk_get_hw_from_clkspec()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* 'clk-parent-rewrite' (early part):
clk: Move of_clk_*() APIs into clk.c from clkdev.c
clk: Inform the core about consumer devices
clk: Introduce of_clk_get_hw_from_clkspec()
clk: core: clarify the check for runtime PM
clk: Combine __clk_get() and __clk_create_clk()
* clk-ingenic:
clk: ingenic: Remove set but not used variable 'enable'
clk: ingenic: Fix doc of ingenic_cgu_div_info
clk: ingenic: Fix round_rate misbehaving with non-integer dividers
clk: ingenic: jz4740: Fix gating of UDC clock
* clk-mtk-mux:
clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
clk: mediatek: add MUX_GATE_FLAGS_2
* clk-qcom-sdm845-pcie:
clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
* clk-mtk-crit:
clk: mediatek: Mark bus and DRAM related clocks as critical
clk: mediatek: Add flags to mtk_gate
clk: mediatek: Add MUX_FLAGS macro
* clk-mtk:
clk: mediatek: correct cpu clock name for MT8173 SoC
- Split LCDC into two clks on the Marvell MMP2 SoC
* clk-imx:
clk: imx8mq: add GPIO clocks to clock tree
clk: imx: Refactor entire sccg pll clk
clk: imx: scu: add cpu frequency scaling support
clk: imx: imx8mm: Mark init function __init
clk: imx8mq: Add the missing ARM clock
dt-bindings: imx8mq-clock: Add the missing ARM clock
clk: imx: imx8mq: Fix the rate propagation for arm pll
clk: imx8mq: Add support for the CLKO1 clock
clk: imx8mq: Fix the CLKO2 source select list
clk: imx8mq: Add missing M4 clocks
clk: imx: Add clock driver support for imx8mm
dt-bindings: imx: Add clock binding doc for imx8mm
clk: imx: Add PLLs driver for imx8mm soc
clk: imx5: add imx5_SCC2_IPG_GATE
clk: imx: scu: add set parent support
clk: imx: scu: add fallback compatible string support
clk: imx8mq: Make parent names arrays const pointers
clk: imx: Make parents const pointer in mux wrappers
clk: imx: Make parent_names const pointer in composite-8m
* clk-samsung:
clk: samsung: s3c2443: Mark expected switch fall-through
clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override
clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure
clk: samsung: exynos5433: Add selected IMEM clocks
clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU
clk: samsung: exynos5433: Fix name typo in sssx
clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks
clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs
* clk-ti:
clk: clk-twl6040: Fix imprecise external abort for pdmclk
ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that
clk: ti: check clock type before doing autoidle ops
clk: ti: add a usecount for autoidle
clk: ti: generalize the init sequence of clk_hw_omap clocks
clk: ti: remove usage of CLK_IS_BASIC
clk: ti: add new API for checking if a provided clock is an OMAP clock
clk: ti: move clk_hw_omap list handling under generic part of the driver
* clk-uniphier-gear:
clk: uniphier: Fix update register for CPU-gear
* clk-mmp2-lcdc:
clk: mmp2: separate LCDC peripheral clk form the display clock
dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
Core changes:
- The big change this time around is the irqchip handling in
the qualcomm pin controllers, closely coupled with the
gpiochip. This rework, in a classic fall-between-the-chairs
fashion has been sidestepped for too long. The Qualcomm
IRQchips using the SPMI and SSBI transport mechanisms have
been rewritten to use hierarchical irqchip. This creates
the base from which I intend to gradually pull support for
hierarchical irqchips into the gpiolib irqchip helpers to
cut down on duplicate code. We have too many hacks in the
kernel because people have been working around the missing
hierarchical irqchip for years, and once it was there,
noone understood it for a while. We are now slowly adapting
to using it. This is why this pull requests include changes
to MFD, SPMI, IRQchip core and some ARM Device Trees
pertaining to the Qualcomm chip family. Since Qualcomm have
so many chips and such large deployments it is paramount
that this platform gets this right, and now it (hopefully)
does.
- Core support for pull-up and pull-down configuration, also
from the device tree. When a simple GPIO chip support a
"off or on" pull-up or pull-down resistor, we provide a
way to set this up using machine descriptors or device tree.
If more elaborate control of pull up/down (such as
resistance shunt setting) is required, drivers should be
phased over to use pin control. We do not yet provide a
userspace ABI for this pull up-down setting but I suspect
the makers are going to ask for it soon enough. PCA953x
is the first user of this new API.
- The GPIO mockup driver has been revamped after some
discussion improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for
both testing and virtual prototyping, e.g. when you do
not yet have a GPIO expander to play with but really
want to get something to develop code around before
hardware is available. It's neat. The blackbox testing
usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating
flags.
- A new device core helper for devm_platform_ioremap_resource()
is funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped
I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum
driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers.
-----BEGIN PGP SIGNATURE-----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=VoVC
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
- Allow GPIO call to sleep; pwm_bl
-----BEGIN PGP SIGNATURE-----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=E8a6
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight fixlet from Lee Jones:
"Allow GPIO call to sleep in pwm_bl driver"
* tag 'backlight-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Use gpiod_get_value_cansleep() to get initial state
Subsystem:
- new quartz-load-femtofarads DT property for quartz load capacitance
- remove rtc_class_ops.read_callback
New drivers:
- Abracon AB-RTCMC-32.768kHz-EOZ9
- Amlogic Meson RTC
- Cadence RTC IP
- Microcrystal RV3028
- Whwave sd3078
Drivers:
- cmos: ignore bogus century byte
- ds1307: rework rx8130 support
- isl1208: add isl1209 support, nvmem support
- rs5C372: report invalid time when the oscillator stopped
- rx8581: add rx8571 support
-----BEGIN PGP SIGNATURE-----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=/Noj
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is an unusual amount of new drivers this cycle, and this
explains the number of insertions.
Other than that, the changes are the usual fixes and feature addition.
Subsystem updates:
- new quartz-load-femtofarads DT property for quartz load capacitance
- remove rtc_class_ops.read_callback
New drivers:
- Abracon AB-RTCMC-32.768kHz-EOZ9
- Amlogic Meson RTC
- Cadence RTC IP
- Microcrystal RV3028
- Whwave sd3078
Driver updates:
- cmos: ignore bogus century byte
- ds1307: rework rx8130 support
- isl1208: add isl1209 support, nvmem support
- rs5C372: report invalid time when the oscillator stopped
- rx8581: add rx8571 support"
* tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (66 commits)
rtc: pic32: convert to SPDX identifier
rtc: pic32: let the core handle range
rtc: pic32: convert to devm_rtc_allocate_device
rtc: update my email address
rtc: rv8803: convert to SPDX identifier
rtc: rv8803: let the core handle range
rtc: tx4939: convert to SPDX identifier
rtc: tx4939: use .set_time
rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: tx4939: set range
rtc: tx4939: remove useless test
rtc: zynqmp: let the core handle range
rtc: zynqmp: fix possible race condition
rtc: imx-sc: use rtc_time64_to_tm
rtc: rx8581: Add support for Epson rx8571 RTC
dt-bindings: rtc: add rx8571 compatible
rtc: pcf85063: remove dead code
rtc: remove rtc_class_ops.read_callback
rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
dt-bindings: rtc: add ABEOZ9
...
Legacy behaviour was to allow non-page-aligned mmap requests, as does the
linux mmap(2) implementation by virtue of automatically rounding up for
the caller.
To avoid breaking legacy userspace relax the newly introduced fix.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 5c4604e757 ("drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Adam Zabrocki <adamza@microsoft.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305110409.28633-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit a90e1948ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Atomic state needs to be put even if the commit was successful.
Fixes: dba14b27dd ("drm/i915: Reinitialize sink scrambling/TMDS clock ratio on HPD")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190302003349.19189-1-jose.souza@intel.com
(cherry picked from commit a551cd66bc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull thermal soc updates from Eduardo Valentin:
"Specifics:
- mediatek thermal now supports MT8183
- broadcom thermal now supports Stingray
- qoirq now supports multiple sensors
- fixes on different drivers: rcar, tsens, tegra
Some new drivers are still pending further review and I chose to leave
them for the next merge window while still sending this material"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: rcar_gen3_thermal: Register hwmon sysfs interface
thermal/qcom/tsens-common : fix possible object reference leak
thermal: tegra: add get_trend ops
thermal: tegra: fix memory allocation
thermal: tegra: remove unnecessary warnings
thermal: mediatek: add support for MT8183
dt-bindings: thermal: add binding document for mt8183 thermal controller
thermal: mediatek: add flag for bank selection
thermal: mediatek: add thermal controller offset
thermal: mediatek: add calibration item
thermal: mediatek: add common index of vts settings.
thermal: mediatek: fix register index error
thermal: qoriq: add multiple sensors support
thermal: broadcom: Add Stingray thermal driver
dt-bindings: thermal: Add binding document for SR thermal
If we allocate while iterating the rbtree of active nodes, we may hit
the shrinker and so retire the i915_active, reaping the rbtree. Modifying
the rbtree as we iterate is not good behaviour, so acquire the
i915_active first to keep the tree intact whenever we allocate.
Fixes: a42375af0a ("drm/i915: Release the active tracker tree upon idling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208134704.23039-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 312c4ba1bb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The downgrade of the fullmodeset into fastset
intel_encoder->update_pipe, in possible scenario, skips the En/Dis-able
DDI. Hence breaks the HDCP state change handling.
We also don't have any hdcp tests in CI, because the shard runs don't
have hdcp capable outputs :-/
So this change fixs it by handling the HDCP state change request at
intel_encoder->update_pipe too along with enable and disable of the DDI.
Fixes: d19f958db2 ("drm/i915: Enable fastset for non-boot modesets.")
v2:
Added commit id that broke the HDCP [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
cc: Hans de Goede <hdegoede@redhat.com>
cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1549295080-18353-1-git-send-email-ramalingam.c@intel.com
(cherry picked from commit 634852d1f4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull ibft updates from Konrad Rzeszutek Wilk:
"Two tiny fixes - a missing break, and upgrading the subsystem to use
modern macros"
* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: use virt_to_phys instead of isa_virt_to_bus
iscsi_ibft: Fix missing break in switch statement
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Expands the SWIOTLB to have debugfs support (along with bug-fixes),
and a tiny fix"
* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: drop pointless static qualifier in swiotlb_create_debugfs()
swiotlb: checking whether swiotlb buffer is full with io_tlb_used
swiotlb: add debugfs to track swiotlb buffer usage
swiotlb: fix comment on swiotlb_bounce()
Pull i2c updates from Wolfram Sang:
- the I2C core gained helpers to assist drivers in handling their
suspended state, and drivers were converted to use it
- two new fault-injectors for stress-testing
- bigger refactoring and feature improvements for the ocores,
sh_mobile, and tegra drivers
- platform_data removal for the at24 EEPROM driver
- ... and various improvements and bugfixes all over the subsystem
* 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: Allow recovery of the initial IRQ by an I2C client device.
i2c: ocores: turn incomplete kdoc into a comment
i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
i2c: tegra: Only display error messages if DMA setup fails
i2c: gpio: fault-injector: add 'inject_panic' injector
i2c: gpio: fault-injector: add 'lose_arbitration' injector
i2c: tegra: remove multi-master support
i2c: tegra: remove master fifo support on tegra186
i2c: tegra: change phrasing, "fallbacking" to "falling back"
i2c: expand minor range when registering chrdev region
i2c: aspeed: Add multi-master use case support
i2c: core-smbus: don't trace smbus_reply data on errors
i2c: ocores: Add support for bus clock via platform data
i2c: ocores: Add support for IO mapper registers.
i2c: ocores: checkpatch fixes
i2c: ocores: add SPDX tag
i2c: ocores: add polling interface
i2c: ocores: do not handle IRQ if IF is not set
i2c: ocores: stop transfer on timeout
i2c: tegra: add i2c interface timing support
...
* at91-reset: add sam9x60 support
* sc27xx: improve capacity logic
* goldfish_battery: enhance driver by adding many new properties
* isp1704: drop platform data and migrate to gpiod
* misc. small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=Etl6
-----END PGP SIGNATURE-----
Merge tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Nothing too fancy in the power-supply subsystem this time. There are
less patches than usual, since I did not have enough time to review
them in time. The good news is, that all patches have been in
linux-next for more than two weeks and there are no complicated
cross-subsystem patchsets this time!
Summary:
- at91-reset: add sam9x60 support
- sc27xx: improve capacity logic
- goldfish_battery: enhance driver by adding many new properties
- isp1704: drop platform data and migrate to gpiod
- misc small fixes and improvements"
* tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (25 commits)
power: reset: at91-reset: add support for sam9x60 SoC
dt-bindings: arm: atmel: add new sam9x60 reset controller binding
dt-bindings: arm: atmel: add missing samx7 to reset controller
max17042_battery: fix potential use-after-free on device remove
power: supply: core: Add a field to support battery max voltage
dt-bindings: power: supply: Add voltage-max-design-microvolt property
bq27x00: use cached flags
power: supply: ds2782: fix possible use-after-free on remove
power: supply: bq25890: show max charge current/voltage as configured
power: supply: sc27xx: Fix capacity saving function
power: supply: sc27xx: Fix the incorrect formula when converting capacity to coulomb counter
power: supply: sc27xx: Add one property to read charge voltage
dt-bindings: power: sc27xx: Add one IIO channel to read charge voltage
drivers: power: supply: goldfish_battery: Add support for reading more properties
power: supply: charger-manager: Fix trivial language typos
cpcap-charger: generate events for userspace
power: supply: remove some duplicated includes
power: twl4030: fix a missing check of return value
drivers: power: supply: goldfish_battery: Use tabs for alignment
drivers: power: supply: goldfish_battery: Fix alignment
...
* Fix a use after free error in a certain error situation.
* Fix some flag handling issues in the SSIF (I2C) IPMI driver.
* A bunch of cleanups, spacing issues, converting pr_xxx to dev_xxx,
use standard UUID handling, and some other minor stuff.
* The IPMI code was creating a platform device if none was supplied.
Instead of doing that, have every source that creates an IPMI
device supply a device struct. This fixes several issues,including
a crash in one situation, and cleans things up a bit.
-----BEGIN PGP SIGNATURE-----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=LSch
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A couple of bug fixes and a bunch of code cleanup:
- Fix a use after free error in a certain error situation.
- Fix some flag handling issues in the SSIF (I2C) IPMI driver.
- A bunch of cleanups, spacing issues, converting pr_xxx to dev_xxx,
use standard UUID handling, and some other minor stuff.
- The IPMI code was creating a platform device if none was supplied.
Instead of doing that, have every source that creates an IPMI
device supply a device struct. This fixes several issues,including
a crash in one situation, and cleans things up a bit"
* tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi:
ipmi_si: Potential array underflow in hotmod_handler()
ipmi_si: Remove hacks for adding a dummy platform devices
ipmi_si: Consolidate scanning the platform bus
ipmi_si: Remove hotmod devices on removal and exit
ipmi_si: Remove hardcode IPMI devices by scanning the platform bus
ipmi_si: Switch hotmod to use a platform device
ipmi: Consolidate the adding of platform devices
ipmi_si: Rename addr_type to addr_space to match what it does
ipmi_si: Convert some types into unsigned
ipmi_si: Fix crash when using hard-coded device
ipmi: Use dedicated API for copying a UUID
ipmi: Use defined constant for UUID representation
ipmi:ssif: Change some pr_xxx to dev_xxx calls
ipmi: kcs_bmc: handle devm_kasprintf() failure case
ipmi: Fix return value when a message is truncated
ipmi: clean an indentation issue, remove extraneous space
ipmi: Make the smi watcher be disabled immediately when not needed
ipmi: Fix how the lower layers are told to watch for messages
ipmi: Fix SSIF flag requests
ipmi_si: fix use-after-free of resource->name
Pull RAS updates from Borislav Petkov:
"This time around we have in store:
- Disable MC4_MISC thresholding banks on all AMD family 0x15 models
(Shirish S)
- AMD MCE error descriptions update and error decode improvements
(Yazen Ghannam)
- The usual smaller conversions and fixes"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Improve error message when kernel cannot recover, p2
EDAC/mce_amd: Decode MCA_STATUS in bit definition order
EDAC/mce_amd: Decode MCA_STATUS[Scrub] bit
EDAC, mce_amd: Print ExtErrorCode and description on a single line
EDAC, mce_amd: Match error descriptions to latest documentation
x86/MCE/AMD, EDAC/mce_amd: Add new error descriptions for some SMCA bank types
x86/MCE/AMD, EDAC/mce_amd: Add new McaTypes for CS, PSP, and SMU units
x86/MCE/AMD, EDAC/mce_amd: Add new MP5, NBIO, and PCIE SMCA bank types
RAS: Add a MAINTAINERS entry
RAS: Use consistent types for UUIDs
x86/MCE/AMD: Carve out the MC4_MISC thresholding quirk
x86/MCE/AMD: Turn off MC4_MISC thresholding on all family 0x15 models
x86/MCE: Switch to use the new generic UUID API
Commit f7c90c2aa4 ("x86/xen: don't write ptes directly in 32-bit
PV guests") introduced a regression for booting dom0 on huge systems
with lots of RAM (in the TB range).
Reason is that on those hosts the p2m list needs to be moved early in
the boot process and this requires temporary page tables to be created.
Said commit modified xen_set_pte_init() to use a hypercall for writing
a PTE, but this requires the page table being in the direct mapped
area, which is not the case for the temporary page tables used in
xen_relocate_p2m().
As the page tables are completely written before being linked to the
actual address space instead of set_pte() a plain write to memory can
be used in xen_relocate_p2m().
Fixes: f7c90c2aa4 ("x86/xen: don't write ptes directly in 32-bit PV guests")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
* New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck)
* Altera SDRAM functionality carveout for separate enablement of RAS and
SDRAM capabilities on some Altera chips. (Thor Thayer)
* The usual round of cleanups and fixes
Last but not least:
* Recruit James Morse as a reviewer for the ARM side
-----BEGIN PGP SIGNATURE-----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=A1kA
-----END PGP SIGNATURE-----
Merge tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- A new EDAC AST 2500 SoC driver (Stefan M Schaeckeler)
- New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck)
- Altera SDRAM functionality carveout for separate enablement of RAS
and SDRAM capabilities on some Altera chips. (Thor Thayer)
- The usual round of cleanups and fixes
And last but not least: recruit James Morse as a reviewer for the ARM
side.
* tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC/altera: Add separate SDRAM EDAC config
EDAC, altera: Add missing of_node_put()
EDAC, skx_common: Add code to recognise new compound error code
EDAC, i10nm: Fix randconfig builds
EDAC, i10nm: Add a driver for Intel 10nm server processors
EDAC, skx_edac: Delete duplicated code
EDAC, skx_common: Separate common code out from skx_edac
EDAC: Do not check return value of debugfs_create() functions
EDAC: Add James Morse as a reviewer
dt-bindings, EDAC: Add Aspeed AST2500
EDAC, aspeed: Add an Aspeed AST2500 EDAC driver
Pull HID updates from Jiri Kosina:
- support for Pro Pen slim, from Jason Gerecke
- power management improvements to Intel-ISH driver, from Song Hongyan
- UCLogic driver revamp in order to be able to support wider range of
Huion tablets, from Nikolai Kondrashov
- Asus Transbook support, from NOGUCHI Hiroshi
- other assorted small bugfixes / cleanups and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits)
HID: Remove Waltop tablets from hid_have_special_driver
HID: Remove KYE tablets from hid_have_special_driver
HID: Remove hid-uclogic entries from hid_have_special_driver
HID: uclogic: Do not initialize non-USB devices
HID: uclogic: Add support for Ugee G5
HID: uclogic: Support Gray-coded rotary encoders
HID: uclogic: Support faking Wacom pad device ID
HID: uclogic: Add support for XP-Pen Deco 01
HID: uclogic: Add support for XP-Pen Star G640
HID: uclogic: Add support for XP-Pen Star G540
HID: uclogic: Add support for Ugee EX07S frame controls
HID: uclogic: Add support for Ugee M540
HID: uclogic: Add support for Ugee 2150
HID: uclogic: Support v2 protocol
HID: uclogic: Support fragmented high-res reports
HID: uclogic: Support in-range reporting emulation
HID: uclogic: Designate current protocol v1
HID: uclogic: Re-initialize tablets on resume
HID: uclogic: Extract tablet parameter discovery into a module
HID: uclogic: Extract report descriptors to a module
...
