This comment gives pretty much the same information as the name of the
function that it immediately precedes.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds support for monitoring IEEE 802.11 Data and Management frames
received or transmitted by a RTL8188EU-based device handled by this
driver.
The monitor interface is not enabled by default and will be registered
only if monitor_enable module parameter is set to 1. When enabled it
will show up as a monX network device, which can be used by the
userspace programs for monitoring network traffic.
It is intended as an exploratory/debugging tool for rtl8188eu driver.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BIT() macro is already defined in bitops.h, remove duplicate
definitions. Users of BIT() macro are expecting unsigned int/u32, so
add typecasts where this creates a build warning.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
printk() supports %pM format specifier for printing 6-byte MAC/FDDI
addresses in hex notation small buffers, let's use it intead of %x:%x...
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm_odm was being checked for NULL after dereferencing it. Lets check for
NULL first before derefenrencing it.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using 'extern' is not necessary for function prototypes.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multiple blank lines is against the kernel coding style and checkpatch
complains for that.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_init_recvframe() was not being used.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An exit label which does nothing except return, is not worth having. So
remove it.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_RECV_OSDEP_C_ was only defined here but never checked anywhere.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Re-arrange the code to directly return success or failure, thus removing
the variable used in the function.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value of rtw_os_recv_resource_alloc() is never checked, so
make it as void. Moreover as of now the function can not fail.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_os_recv_resource_alloc() only uses the argument
struct recv_frame *. So remove the other unused argument.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch compresses two lines into a single line if immediate return is
found. Also remove variable ret as it is no longer needed.
Semantic patch used for this is as follows:
@@
type T;
identifier i,f;
constant C;
@@
- T i;
...when != i
when strict
(
return -C;
|
- i =
+ return
f(...);
- return i;
)
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
linux/ieee80211.h already defines constants for spatial multiplexing
power save modes. Remove the duplicated definitions.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
linux/ieee80211.h already defines constants for information element IDs.
Resolve discrepancies in naming and remove the duplicated definitions.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to the rtw_debug.c file that fixes styling errors relating to
new lines after variable declarations.
Signed-off-by: Dave Perez <dave@daveperez.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Flag is never set. Remove it and the code that is dead because of it.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactored rtw_free_assoc_resources to avoid sparse warnings about
different contexts for basic lock
Signed-off-by: Buţiu Alexandru Octavian <predator5047@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Success and error path was mixed. Separate them by directly returning 0
from the success path. In the process remove the variable which became
unused.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for kzalloc failure and directly return from the error patch thus
simplifying the success path.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Directly return NULL instead of using another label and goto.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_HCI_INTF_C_ was only defined here but not being used anywhere.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable ret was always 0. So remove the variable and always
return 0 from the function.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stop using DBG_88E which is a custom macro for printing debugging
messages. Instead start using pr_debug and in the process define
pr_fmt.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default value of status was _FAIL, it was only changed if kzalloc
succeeds and the check for status is immediately following kzalloc. We
can have the failure code in the else part as the failure code will be
executed only if kzalloc fails.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By checking for the success of kzalloc we were able to remove the goto
label thus making the code more readable.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check for pstat and pdvobjpriv is not required here as we have
already checked for them before.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The inline function rtw_set_ips_deny() was only defined but was never
used.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_write_rfreg() is never referenced, so remove it.
It used to be the only place where the write_rfreg callback was
called, so get rid of the function pointer as well.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_set_def_var() is never referenced, so remove it.
It used to be the only place where the SetHalDefVarHandler callback was
called, so get rid of the function pointer as well.
Also remove the callback itself, SetHalDefVar8188EUsb(), which was not
called anywhere else.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_enable_interrupt() and rtw_hal_disable_interrupt() are never
referenced, so remove them.
They used to be the only place where the enable_interrupt() and
disable_interrupt() callbacks were called, and the function pointer
is never set, so get rid of the function pointer as well.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both rtl8188e_read_chip_version() and ReadChipVersion8188E() are used
only in one place. Make ReadChipVersion8188E() a void function and
eliminate its wrapper - rtl8188e_read_chip_version().
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ROM version on RTL8188EU is always 0.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RFtype in struct HAL_VERSION duplicates rf_type in struct
hal_data_8188e, and does not change. Remove it and the macros that test
it.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IC type on RTL8188EU is always 8188E. Remove it and all the macros that
check it.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
