Commit Graph

2070 Commits

Author SHA1 Message Date
Heiko Carstens
9c95258c0d [S390] sclp: avoid 64 bit division
Avoid 64 bit division to fix this compile error on 32 bit:
drivers/s390/char/sclp_cmd.c:711: undefined reference to `__udivdi3'

Also move the whole arch_get_memory_phys_device function to the
memory hotplug related functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24 11:49:53 +01:00
Stefan Haberland
b8fde7224d [S390] dasd: check tsb validity
Check tsb validity before the tcw_get_tsb function is called.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24 11:49:53 +01:00
Stefan Weinhuber
4a31ba57ca [S390] dasd: fix alignment of transport mode recovery TCW
All TCWs need to be aligned on a 64 byte boundary or the I/O will be
rejected. For recovery requests we create fresh TCWs, so we need to
do the proper alignment here as well.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24 11:49:53 +01:00
Michael Holzheu
92fe31329c [S390] zcore: CPU registers are not saved under LPAR
To save the registers for all CPUs a sigp "store status" is done that
stores the registers to address absolute zero. To access storage at
absolute zero, normally the address of the prefix register of the
accessing CPU has to be used. This does not work when large pages are
active (currently only under LPAR). In order to fix that problem,
instead of memcpy memcpy_real is used, which switches to real mode
where prefixing works.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24 11:49:53 +01:00
Frank Blaschka
70f60a220b qeth: l3 fix build error in ipv6 addr list handling
Adapt qeth l3 to:
commit c2e21293c0
(ipv6: convert addrconf list to hlist)
converted lst_next member of inet6_ifaddr struct to a hlist.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 09:59:48 -07:00
Heiko Carstens
57b552ba0b memory hotplug/s390: set phys_device
Implement arch specific arch_get_memory_phys_device function and
initialize phys_device for each memory section.  That way we finally can
tell which piece of memory belongs to which physical device.

This makes s390's /sys/devices/system/memory/memoryX/phys_device display
the correct thing?

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
Jiri Pirko
ff6e2163f2 net: convert multiple drivers to use netdev_for_each_mc_addr, part7
In mlx4, using char * to store mc address in private structure instead.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 21:23:25 -07:00
Thomas Weber
8839316121 Fix typos in comments
[Ss]ytem => [Ss]ystem
udpate => update
paramters => parameters
orginal => original

Signed-off-by: Thomas Weber <swirl@gmx.li>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-16 11:47:56 +01:00
Linus Torvalds
d89b218b80 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits)
  bridge: ensure to unlock in error path in br_multicast_query().
  drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages
  sky2: Avoid rtnl_unlock without rtnl_lock
  ipv6: Send netlink notification when DAD fails
  drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant
  ipconfig: Handle devices which take some time to come up.
  mac80211: Fix memory leak in ieee80211_if_write()
  mac80211: Fix (dynamic) power save entry
  ipw2200: use kmalloc for large local variables
  ath5k: read eeprom IQ calibration values correctly for G mode
  ath5k: fix I/Q calibration (for real)
  ath5k: fix TSF reset
  ath5k: use fixed antenna for tx descriptors
  libipw: split ieee->networks into small pieces
  mac80211: Fix sta_mtx unlocking on insert STA failure path
  rt2x00: remove KSEG1ADDR define from rt2x00soc.h
  net: add ColdFire support to the smc91x driver
  asix: fix setting mac address for AX88772
  ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}.
  net: Fix dev_mc_add()
  ...
2010-03-13 14:50:18 -08:00
Linus Torvalds
c32da02342 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
  doc: fix typo in comment explaining rb_tree usage
  Remove fs/ntfs/ChangeLog
  doc: fix console doc typo
  doc: cpuset: Update the cpuset flag file
  Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
  Remove drivers/parport/ChangeLog
  Remove drivers/char/ChangeLog
  doc: typo - Table 1-2 should refer to "status", not "statm"
  tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
  No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
  devres/irq: Fix devm_irq_match comment
  Remove reference to kthread_create_on_cpu
  tree-wide: Assorted spelling fixes
  tree-wide: fix 'lenght' typo in comments and code
  drm/kms: fix spelling in error message
  doc: capitalization and other minor fixes in pnp doc
  devres: typo fix s/dev/devm/
  Remove redundant trailing semicolons from macros
  fix typo "definetly" -> "definitely" in comment
  tree-wide: s/widht/width/g typo in comments
  ...

Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12 16:04:50 -08:00
Frank Blaschka
78cb27939f qeth: change checksumming default for HiperSockets
Deactivate inbound checksumming on HiperSocket is a valid but
dangerous optimization in case the frame is routed from an OSA
network to an HiperSockets network. To go for sure we change the
default to software checksumming.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 07:32:26 -08:00
Ursula Braun
869da90b9a qeth: no recovery after layer mismatch (z/VM NICs)
Depending on their definition in z/VM, virtual devices for z/VM
VSWITCH or GuestLAN must be configured either in layer2 or in
layer3 mode. If qeth detects a layer mismatch, device activation
fails. Trying to recover from this error cannot help; thus
scheduling a recovery should be avoided.
In addition, since recovery is forbidden during online setting of
a qeth device, existence of its network device is guaranteed for all
dev_close() calls in qeth. The corresponding checks can be removed.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 07:32:26 -08:00
Ursula Braun
a959189a97 qeth: set promisc off after trace disabling failure
If HiperSockets Network Traffic Analyzer is switched off, but trace
disabling fails somehow, the qeth driver does not switch off its
promisc mode status. A following sniffer reactivation fails, since
qeth does not see a need to reenable tracing.
At the same time the code analyzing results of trace commands is
restructured.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 07:32:25 -08:00
Frank Blaschka
21fde749cb qeth: l3 send dhcp in non pass thru mode
dhcp frames are valid IPv4 packets so there is no need to send them
in pass thru mode. This allows dhcp packets to pass HiperSockets.
Also the dhcp release frame is send out correctly with this patch.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 07:32:25 -08:00
Ursula Braun
fe7a26257a qeth: enable kmsg hash processing in qeth_core_sys.c
provide qeth kmsg definitions to enable hash string generation for
kernel message created with dev_err().

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 07:32:24 -08:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Hendrik Brueckner
1ffaa640c6 [S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as uevents
The smsgiucv_app driver registers a callback with the smsgiucv driver
to receive z/VM CP special messages (SMSG) starting with "APP".

When the callback is called for special messages, the driver creates
an uevent for the received message.  The uevent consists of additional
environment data containing the message prefix ("APP"), message sender,
and message content.

udev rules can be used to trigger application specific actions through
matching the content or sender of the special message.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08 12:26:28 +01:00
Hendrik Brueckner
09003ed90a [S390] smsgiucv: declare char pointers as "const"
Declare the smsgiucv prefix char pointer as "const" and use
use const char pointers in callback functions.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08 12:26:28 +01:00
Stefan Weinhuber
33b62a30f7 [S390] dasd: automatic recognition of read-only devices
In z/VM it is possible to attach a device as read-only. To prevent
unintentional write requests and subsequent I/O errors, we can detect
this configuration using the z/VM DIAG 210 interface and set the
respective linux block device to read-only as well.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08 12:26:27 +01:00
Ursula Braun
584dfddfce [S390] remove unused qdio flags in zfcp and qeth
zfcp and qeth are setting flags for the qdio-layer, but these flags
are not used in qdio. Patch removes the flag definitions from qdio
and their settings in zfcp and qeth.

Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Cc: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08 12:25:30 +01:00
Ursula Braun
bd6e8a162e [S390] qdio: add missing bracket
Add a missing bracket to only log the outbound handler event in the
appropriate case.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08 12:25:30 +01:00
Sebastian Ott
a290156f47 [S390] cio: fix init_count in case of recognition after steal lock
After we try to steal a lock on a ccw device in boxed state,
we have to restart device recognition and potentially reprobing.

In this case ccw_device_init_count was erroneously decreased
twice. This patch fixes the issue.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08 12:25:30 +01:00
Nigel Hislop
52898025cf [S390] dasd: security and PSF update patch for EMC CKD ioctl
Remove the PSF order/suborder check from the Symmetrix CKD dasd ioctl.
In exchange restrict the ioctl to CAP_SYS_ADMIN and CAP_SYS_RAWIO.

Signed-off-by: Nigel Hislop <hislop_nigel@emc.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-08 12:25:30 +01:00
Linus Torvalds
6d6b89bd2e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1341 commits)
  virtio_net: remove forgotten assignment
  be2net: fix tx completion polling
  sis190: fix cable detect via link status poll
  net: fix protocol sk_buff field
  bridge: Fix build error when IGMP_SNOOPING is not enabled
  bnx2x: Tx barriers and locks
  scm: Only support SCM_RIGHTS on unix domain sockets.
  vhost-net: restart tx poll on sk_sndbuf full
  vhost: fix get_user_pages_fast error handling
  vhost: initialize log eventfd context pointer
  vhost: logging thinko fix
  wireless: convert to use netdev_for_each_mc_addr
  ethtool: do not set some flags, if others failed
  ipoib: returned back addrlen check for mc addresses
  netlink: Adding inode field to /proc/net/netlink
  axnet_cs: add new id
  bridge: Make IGMP snooping depend upon BRIDGE.
  bridge: Add multicast count/interval sysfs entries
  bridge: Add hash elasticity/max sysfs entries
  bridge: Add multicast_snooping sysfs toggle
  ...

Trivial conflicts in Documentation/feature-removal-schedule.txt
2010-03-02 07:55:08 -08:00
Linus Torvalds
b1bf936840 Merge branch 'for-2.6.34' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.34' of git://git.kernel.dk/linux-2.6-block: (38 commits)
  block: don't access jiffies when initialising io_context
  cfq: remove 8 bytes of padding from cfq_rb_root on 64 bit builds
  block: fix for "Consolidate phys_segment and hw_segment limits"
  cfq-iosched: quantum check tweak
  blktrace: perform cleanup after setup error
  blkdev: fix merge_bvec_fn return value checks
  cfq-iosched: requests "in flight" vs "in driver" clarification
  cciss: Fix problem with scatter gather elements in the scsi half of the driver
  cciss: eliminate unnecessary pointer use in cciss scsi code
  cciss: do not use void pointer for scsi hba data
  cciss: factor out scatter gather chain block mapping code
  cciss: fix scatter gather chain block dma direction kludge
  cciss: simplify scatter gather code
  cciss: factor out scatter gather chain block allocation and freeing
  cciss: detect bad alignment of scsi commands at build time
  cciss: clarify command list padding calculation
  cfq-iosched: rethink seeky detection for SSDs
  cfq-iosched: rework seeky detection
  block: remove padding from io_context on 64bit builds
  block: Consolidate phys_segment and hw_segment limits
  ...
2010-03-01 09:00:29 -08:00
David S. Miller
47871889c6 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/firmware/iscsi_ibft.c
2010-02-28 19:23:06 -08:00
Linus Torvalds
7981164791 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (35 commits)
  [S390] time: remove unused code
  [S390] zcore: Add prefix registers to dump header
  [S390] correct vdso version string
  [S390] add support for compressed kernels
  [S390] Define new s390 ELF note sections in elf.h
  [S390] codepage conversion of kernel parameter line
  [S390] seq_file: convert drivers/s390/
  [S390] add z9-ec/z10 instruction to kernel disassembler
  [S390] dasd: correct offline processing
  [S390] dasd: fix refcounting.
  [S390] dasd: fix online/offline race
  [S390] use kprobes_built_in() in mm/fault code
  [S390] bug: use relative pointers in bug table entries
  [S390] Cleanup struct _lowcore usage and defines.
  [S390] free_initmem: reduce code duplication
  [S390] Replace ENOTSUPP usage with EOPNOTSUPP
  [S390] spinlock: check virtual cpu running status
  [S390] sysinfo: fix SYSIB 3,2,2 structure
  [S390] add MACHINE_IS_LPAR flag
  [S390] qdio: optimize cache line usage of struct qdio_irq
  ...
2010-02-27 16:20:17 -08:00
Linus Torvalds
654451748b Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (158 commits)
  [SCSI] Fix printing of failed 32-byte commands
  [SCSI] Fix printing of variable length commands
  [SCSI] libsrp: fix bug in ADDITIONAL CDB LENGTH interpretation
  [SCSI] scsi_dh_alua: Add IBM Power Virtual SCSI ALUA device to dev list
  [SCSI] scsi_dh_alua: add netapp to dev list
  [SCSI] qla2xxx: Update version number to 8.03.02-k1.
  [SCSI] qla2xxx: EEH: Restore PCI saved state during pci slot reset.
  [SCSI] qla2xxx: Add firmware ETS burst support.
  [SCSI] qla2xxx: Correct loop-resync issues during SNS scans.
  [SCSI] qla2xxx: Correct use-after-free issue in terminate_rport_io callback.
  [SCSI] qla2xxx: Correct EH bus-reset handling.
  [SCSI] qla2xxx: Proper clean-up of BSG requests when request times out.
  [SCSI] qla2xxx: Initialize payload receive length in failure path of vendor commands
  [SCSI] fix duplicate removal on error path in scsi_sysfs_add_sdev
  [SCSI] fix refcounting bug in scsi_get_host_dev
  [SCSI] fix memory leak in scsi_report_lun_scan
  [SCSI] lpfc: correct PPC build failure
  [SCSI] raid_class: add raid1e
  [SCSI] mpt2sas: Do not call sas_is_tlr_enabled for RAID volumes.
  [SCSI] zfcp: Introduce header file for qdio structs and inline functions
  ...
2010-02-26 16:55:27 -08:00
Michael Holzheu
0cbde8ee60 [S390] zcore: Add prefix registers to dump header
With this patch the prefix registers of all online CPUs are stored in the
the zcore dump header. This allows dump analysis tools to access the register
information that is stored in the prefix pages without using the System.map.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:33 +01:00
Alexey Dobriyan
34b9243a30 [S390] seq_file: convert drivers/s390/
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:32 +01:00
Stefan Haberland
b695adfaa1 [S390] dasd: correct offline processing
Flushing the dasd ccw request queue may stop the processing of the
block device request queue. Destroy partitions may wait for
outstanding requests and thus hang.
Swapping dasd_destroy_partitions and dasd_flush_request_queue so that
the request queue is empty before dasd_destroy_partitions is called.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:32 +01:00
Stefan Haberland
589c74d507 [S390] dasd: fix refcounting.
The function dasd_device_from_cdev returns a reference to the dasd
device and increases the refcount by one. If an exception occurs,
the refcount was not decreased in all cases
e.g. in dasd_discipline_show.
Prevent the offline processing from hang by correcting two functions
to decrease the refcount even if an error occured.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:32 +01:00
Stefan Haberland
9eb251225a [S390] dasd: fix online/offline race
Setting a DASD online and offline in quick succession may cause
a kernel panic or let the chhccwdev command wait forever.
The Online process is split into two parts. After the first part
is finished the offline process may be called. This may result
in a situation where the second online processing part tries to
set the DASD offline as well.
Use a mutex to protect online and offline against each other.
Also correct some checking.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:32 +01:00
Heiko Carstens
cbb870c822 [S390] Cleanup struct _lowcore usage and defines.
Use asm offsets to make sure the offset defines to struct _lowcore and
its layout don't get out of sync.
Also add a BUILD_BUG_ON() which checks that the size of the structure
is sane.
And while being at it change those sites which use odd casts to access
the current lowcore. These should use S390_lowcore instead.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:31 +01:00
Martin Schwidefsky
27d71602b4 [S390] add MACHINE_IS_LPAR flag
Introduce the MACHINE_IS_LPAR flag for code that should only be
executed if Linux is running in an LPAR.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:31 +01:00
Jan Glauber
432ac5e04b [S390] qdio: optimize cache line usage of struct qdio_irq
Remove a memset hack that relied on the internal layout of the
qdio_irq struct and move the per device statistics data into an own
cache line to avoid cache line bashing between the inbound and the
outbound queue tasklets. Also reduce the number of allocated queues
from 32 to 4 which is the current maximum. That saves a cache line
in struct qdio_irq.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:31 +01:00
Jan Glauber
d307297f73 [S390] qdio: account processed SBAL during queue scan
Add counters for the number of processed SBALs. The numbers summarize
how many SBALs were processed at each queue scan and indicate the
utilization of the queue. Furthermore the number of unsuccessfull
queue scans, SBAL errors and the total number of processed
SBALs are accounted.

Also regroup struct qdio_q to move read-mostly and write-mostly data
into different cachelines.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:30 +01:00
Heiko Carstens
f64ca21714 [S390] zfcpdump: remove cross arch dump support
Remove support to be able to dump 31 bit systems with a 64 bit dumper.
This is mostly useless since no distro ships 31 bit kernels together
with a 64 bit dumper.
We also get rid of a bit of hacky code.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:30 +01:00
Heiko Carstens
d1bf85902c [S390] cio: fix storage key handling
Some parts of cio do not shift PAGE_DEFAULT_KEY correctly and end up
with an incorrect key in their data structures.
Since the default key is zero this doesn't really matter. However if
somebody would use key-controlled protection for debugging purposes
it would be quite helpful if all of this would work as expected.

Also remove a stale declaration.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:30 +01:00
Sebastian Ott
0d01bb8922 [S390] cio: trigger subchannel event at resume time
ccw_device_pm_restore: trigger subchannel event to better handle
changes to the subchannel device.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:30 +01:00
Sebastian Ott
76e6fb4b86 [S390] ccw_device_notify: improve return codes
Callers of ccw_device_notify could not distinguish between a driver
who has no notifier registered and a driver who doesn't want to keep
a device after a certain event. Change this by adding proper return
codes.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:29 +01:00
Sebastian Ott
b4c707214c [S390] cio: make wait_events interruptible
Make the potentially long blocking wait_event's used by the cio
settle mechanism interruptible.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:29 +01:00
Sebastian Ott
b4563e891a [S390] cio: wait for channel report
To fetch a pending channel report word (crw) we use a kernel
thread which triggers stcrw and sleeps on a semaphore. The s390
machine check handler uses crw_handle_channel_report to handle
one crw if needed.

This patch replaces the semaphore with a waitqueue (to block the
kernel thread) and an atomic_t (to count the number of pending
requests).

By this we achieve the ability to force this thread to check for
a pending crw (independent on when it is triggered by the machine
check handler) and wait for this action to finish.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:29 +01:00
Sebastian Ott
879acca58a [S390] cio: introduce cio_settle
This patch introduces a proc file cio_settle. A write request to
this file is blocked until all queued cio actions are handled.

This will allow userspace to wait for pending work affecting
device availability after changing cio_ignore or the hardware
configuration.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:29 +01:00
Sebastian Ott
be5d3823f2 [S390] cio: consolidate workqueues
We used to maintain 2 singlethreaded workqueues for synchronization
and to trigger work from interrupt context. Since our latest cio
changes we only use one of these workqueues. So get rid of the
unused workqueue, rename the remaining one to "cio_work_q" and move
its ownership to the channel subsystem driver.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26 22:37:29 +01:00
Martin K. Petersen
8a78362c4e block: Consolidate phys_segment and hw_segment limits
Except for SCSI no device drivers distinguish between physical and
hardware segment limits.  Consolidate the two into a single segment
limit.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 13:58:08 +01:00
Martin K. Petersen
086fa5ff08 block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectors
The block layer calling convention is blk_queue_<limit name>.
blk_queue_max_sectors predates this practice, leading to some confusion.
Rename the function to appropriately reflect that its intended use is to
set max_hw_sectors.

Also introduce a temporary wrapper for backwards compability.  This can
be removed after the merge window is closed.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 13:58:08 +01:00
Christof Schmitt
34c2b71299 [SCSI] zfcp: Introduce header file for qdio structs and inline functions
Move the qdio related structs and some helper functions to a new
zfcp_qdio.h header file. While doing this, rename the struct
zfcp_queue_req to zfcp_qdio_req to adhere to the naming scheme used in
zfcp. This allows a better seperation of the qdio code and inlining
the helper functions will save some function calls.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:35 -06:00
Christof Schmitt
2d8e62bbf7 [SCSI] zfcp: Replace FC4 constants with information from exchange port
The FC4 types are already available from exchange port.  Use this for
reporting the FC4 types, instead of having the value hardcoded in
zfcp.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:33 -06:00
Christof Schmitt
ab72528a44 [SCSI] zfcp: Move scsi result tracing decision to zfcp_dbf.h
Move the decision which trace tag and trace level to use for the scsi
result trace to zfcp_dbf.h. zfcp_dbf_scsi_result is already an inline
function, so move the trace code there, simplifying the response
handling in zfcp_fsf.c.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:31 -06:00
Christof Schmitt
615f59e0da [SCSI] zfcp: Rename sysfs_device attribute to dev in zfcp_unit and zfcp_port
Kernel code uses dev as short name for the struct device. Rename the
sysfs_device in zfcp_unit and zfcp_port to match this convention.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:30 -06:00
Christof Schmitt
5bdecd2248 [SCSI] zfcp: Remove duplicate assignment of req_seq_no
zfcp_fsf_req_create assigns the same value twice to req_seq_no.
Remove one assignment and move the req_id and seq_no assignments to
one place.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:28 -06:00
Christof Schmitt
d21e9daa63 [SCSI] zfcp: Dont use 0 to indicate invalid LUN in rec trace
0 is a valid value for a LUN. It is slightly confusing to also see 0
in the trace entries relating to adapter and port. Change this to use
0xFFFFFFFFFFFFFFFF in the LUN field when the trace entry does not
relate to a LUN or unit.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:27 -06:00
Christof Schmitt
22ed130719 [SCSI] zfcp: Fix warnings from smatch
The smatch tool from http://repo.or.cz/w/smatch.git warns about this:

drivers/s390/scsi/zfcp_scsi.c +64 zfcp_scsi_command_fail(5) warn: variable dereferenced before check 'scpnt->device'
drivers/s390/scsi/zfcp_scsi.c +64 zfcp_scsi_command_fail(5) warn: variable dereferenced before check 'scpnt->device->host'
drivers/s390/scsi/zfcp_scsi.c +93 zfcp_scsi_queuecommand(23) warn: variable dereferenced before check 'unit'

Fix the first two warnings by removing the checks for scpnt->device
and -> host: As long as the SCSI command exists, there is also a
scsi_device and a Scsi_Host.

Fix the last warning by removing the BUG_ON checks in
zfcp_scsi_queuecommand, they are leftovers from previous paranoia
about wrong pointers between data structures.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:24 -06:00
Christof Schmitt
67feeebaa7 [SCSI] zfcp: Remove unused payload field from zfcp_dbf_san_record
Remove the unused payload field from the struct zfcp_dbf_san_record,
saving some space in the SAN trace.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:22 -06:00
Christof Schmitt
452b505c5a [SCSI] zfcp: Remove two FIXME comments
On a link down, the adapter reopen is not strictly necessary, but it
helps flushing pending requests as quickly as possible. Add a comment
mentioning this.

qdio returning a problem on the response queue is an unlikely event.
The recovery mentioned in the comment might resolve it, so implement
it. This also has the advantage that it creates an entry in the
recovery trace to see if and when this is occurring.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:21 -06:00
Christof Schmitt
b6bd2fb92a [SCSI] zfcp: Move FSF request tracking code to new file
Move the code for tracking FSF requests to new file to have this code
in one place. The functions for adding and removing requests on the
I/O path are already inline. The alloc and free functions are only
called once, so it does not hurt to inline them and add them to the
same file.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:19 -06:00
Christof Schmitt
e60a6d69f1 [SCSI] zfcp: Remove function zfcp_reqlist_find_safe
Always use the FSF request id as a reference to the FSF request. With
this change the function zfcp_reqlist_find_safe is no longer needed
and can be removed.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:17 -06:00
David S. Miller
2bb4646fce Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-02-16 22:09:29 -08:00
Linus Torvalds
fd48d6c888 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla2xxx: Obtain proper host structure during response-queue processing.
  [SCSI] compat_ioct: fix bsg SG_IO
  [SCSI] qla2xxx: make msix interrupt handler safe for irq
  [SCSI] zfcp: Report FC BSG errors in correct field
  [SCSI] mptfusion : mptscsih_abort return value should be SUCCESS instead of value 0.
2010-02-11 14:05:55 -08:00
Daniel Mack
3ad2f3fbb9 tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:13:56 +01:00
Jan Glauber
959153d345 [S390] qdio: prevent call trace if CHPID is offline
If a CHPID is offline during a device shutdown the ccw_device_halt|clear
may fail and the qdio device stays in state STOPPED until the shutdown is
finished. If an interrupt occurs before the device is set to INACTIVE
the STOPPED state triggers a WARN_ON in the interrupt handler.
Prevent this WARN_ON by catching the STOPPED state in the interrupt
handler.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-09 09:46:23 +01:00
Ursula Braun
4c52228d1b [S390] qdio: continue polling for buffer state ERROR
Inbound traffic handling may hang if next buffer to check is in
state ERROR, polling is stopped and the final check for further
available inbound buffers disregards buffers in state ERROR.
This patch includes state ERROR when checking availability of
more inbound buffers.

Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-09 09:46:23 +01:00
Swen Schillig
7dec9cf1df [SCSI] zfcp: Report FC BSG errors in correct field
The status FC_CTELS_STATUS_REJECT for all FC BSG errors is not
appropriate. Instead, report -EIO in the result field if there was a
problem in zfcp with the FC BSG request. If the request is good from
our point of view, report result 0, status FC_CTELS_STATUS_OK and let
userspace read the Accept or Reject from the payload (as documented in
scsi_bsg_fc.h).

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 13:40:17 -06:00
Linus Torvalds
be8cde8b24 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree
  [SCSI] zfcp: Set hardware timeout as requested by BSG request.
  [SCSI] zfcp: Introduce bsg_timeout callback.
  [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout
  [SCSI] zfcp: add missing compat ptr conversion
  [SCSI] zfcp: Fix linebreak in hba trace
  [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request
  [SCSI] qla2xxx: Update version number to 8.03.01-k10.
  [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure.
  [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment.
  [SCSI] qla2xxx: Correct FCP2 recovery handling.
  [SCSI] scsi_lib: Fix bug in completion of bidi commands
  [SCSI] mptsas: Fix issue with chain pools allocation on katmai
  [SCSI] aacraid: fix File System going into read-only mode
  [SCSI] lpfc: fix file permissions
2010-01-27 09:54:08 -08:00
Felix Beck
19b123ebac [S390] zcrypt: Do not remove coprocessor for error 8/72
In a case where the number of the input data is bigger than the
modulus of the key, the coprocessor adapters will report an 8/72
error. This case is not caught yet, thus the adapter will be taken
offline. To prevent this, we return an -EINVAL instead.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27 10:12:49 +01:00
Hendrik Brueckner
0b665d770d [S390] sclp_vt220: set initial terminal window size
When opening a SCLP VT220 terminal, the terminal window size is not
initialized (defaults to zero).
Since the SCLP VT220 terminal supports only 80x24, explicitly set
the window size to prevent (n)curses applications from guessing
the default setting.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27 10:12:49 +01:00
Stefan Haberland
294001a80c [S390] dasd: fix possible NULL pointer errors
Fix possible NULL pointer in DASD messages and correct discipline
checking.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27 10:12:48 +01:00
Jiri Pirko
32e7bfc411 net: use helpers to access uc list V2
This patch introduces three macros to work with uc list from net drivers.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-25 13:36:10 -08:00
David S. Miller
51c24aaaca Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-01-23 00:31:06 -08:00
Swen Schillig
51375ee837 [SCSI] zfcp: Set hardware timeout as requested by BSG request.
The hardware used with zfcp provides a timer for CT and ELS requests
instead of an abort capability for these commands. To correctly handle
the FC BSG timeouts, pass the timeout from the BSG requests to the
hardware.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:40:13 -06:00
Swen Schillig
491ca4426b [SCSI] zfcp: Introduce bsg_timeout callback.
Introduce a zfcp callback for timeouts triggered from FC BSG.  With
zfcp, the underlying hardware cannot abort CT or ELS requests, so
there is nothing to do when the block layer timeout expires.  To avoid
interference with the block layer timeout, simply indicate that the
block layer timer should be reset. The timer running in the hardware
for the pending CT or ELS request will return the request when it
expires.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:40:12 -06:00
Heiko Carstens
9e2ab1fabd [SCSI] zfcp: add missing compat ptr conversion
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:38:49 -06:00
Christof Schmitt
5a3fb3081a [SCSI] zfcp: Fix linebreak in hba trace
Advance the correct pointer when inserting the linebreak for the HBA
trace. It was missing in the output since the pointer to the output
buffer was never advanced, and the linebreak character was overwritten
later.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:38:47 -06:00
Christof Schmitt
f09d545457 [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request
The patch "zfcp: Simplify handling of ct and els requests"
accidentally removed the call to zfcp_fc_wka_port_put for FC CT BSG
requests, thus not issuing a "close" request for the WKA ports.
Introduce a CT specific handler to first call zfcp_fc_wka_port_put and
then continue with the generic handler when returning from FC CT BSG
requests.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:38:46 -06:00
Einar Lueck
a60389abaa qeth: default BLKT values for new OSA/3 hardware
Set default BLKT values for new OSA/3 hardware.

Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13 20:34:57 -08:00
Ursula Braun
84b66683db qeth: avoid recovery during device online setting
If a qeth device is set online, several initialisation steps are
performed. If a failure in one of these steps occurs, the qeth
device is reset into DOWN state. If due to the failure a qeth recovery
is scheduled and started in another thread, this might cause all kinds
of conflicts, even a kernel panic. The patch forbids scheduling of a
qeth recovery while online processing is performed till the card is in
state SOFTSETUP.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13 20:34:56 -08:00
Ursula Braun
76b11f8e27 qeth: HiperSockets Network Traffic Analyzer
New feature to trace HiperSockets network traffic for debugging
purposes.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13 20:34:55 -08:00
Heiko Carstens
c540607978 [S390] tape_char: add missing compat_ptr conversion
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13 20:44:46 +01:00
Heiko Carstens
0648f5659e [S390] zcrypt: add sanity check before copy_from_user()
It's not obvious that copy_from_user() is called with a sane length
parameter here. Even though it currently seems to be correct better
add a check to prevent stack corruption / exploits.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13 20:44:46 +01:00
Heiko Carstens
7b475d59a0 [S390] con3215: remove empty ioctl function
...instead of adding a compat ioctl function which would do nothing
as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13 20:44:46 +01:00
Heiko Carstens
f8b068593d [S390] dasd: add proper compat pointer conversion for symmetrix ioctl
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13 20:44:46 +01:00
Heiko Carstens
957a37ad58 [S390] tape_block: remove ioctl function
This is just a complicated construct which always returns -EINVAL.
Just remove it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13 20:44:45 +01:00
Heiko Carstens
16e1a57769 [S390] fs3270: add missing compat ptr conversion
Add missing compat ptr conversion including two additional
whitespace changes that aren't worth a separate patch.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13 20:44:45 +01:00
Heiko Carstens
8f3eabe383 [S390] vmcp: add missing compat ptr conversion
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13 20:44:44 +01:00
Heiko Carstens
44ee6a8564 [S390] cio: add missing compat ptr conversion
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13 20:44:44 +01:00
Heiko Carstens
880348653e [S390] dasd: add missing compat ptr conversion
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13 20:44:44 +01:00
Linus Torvalds
597d8c7178 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
  sky2: Fix oops in sky2_xmit_frame() after TX timeout
  Documentation/3c509: document ethtool support
  af_packet: Don't use skb after dev_queue_xmit()
  vxge: use pci_dma_mapping_error to test return value
  netfilter: ebtables: enforce CAP_NET_ADMIN
  e1000e: fix and commonize code for setting the receive address registers
  e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value
  e1000e: perform 10/100 adaptive IFS only on parts that support it
  e1000e: don't accumulate PHY statistics on PHY read failure
  e1000e: call pci_save_state() after pci_restore_state()
  netxen: update version to 4.0.72
  netxen: fix set mac addr
  netxen: fix smatch warning
  netxen: fix tx ring memory leak
  tcp: update the netstamp_needed counter when cloning sockets
  TI DaVinci EMAC: Handle emac module clock correctly.
  dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips
  ixgbe: Fix compiler warning about variable being used uninitialized
  netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq()
  mv643xx_eth: don't include cache padding in rx desc buffer size
  ...

Fix trivial conflict in drivers/scsi/cxgb3i/cxgb3i_offload.c
2010-01-12 20:53:29 -08:00
David S. Miller
d4a66e752d Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/benet/be_cmds.h
	include/linux/sysctl.h
2010-01-10 22:55:03 -08:00
Ursula Braun
d950d17752 claw: use "claw" as root device name
Claw module cannot be loaded together with qeth, because "qeth" has
been errorneously used as root device name. It is changed into "claw".

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07 00:27:07 -08:00
Jan Glauber
6486cda6c6 [S390] qdio: convert global statistics to per-device stats
Revamp the qdio performance statistics and move them from procfs to
debugfs using the seq_file interface. Since the statistics are not
intended for the general user the removal of /proc/qdio_perf should
not surprise anyone.

The per device statistics are disabled by default, writing 1 to
/<debugfs mountpoint>/qdio/<device bus ID>/statistics enables the
statistics for the given device.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-04 09:05:58 +01:00
H Hartley Sweeten
d998ab0bd7 drivers/s390/net/qeth_l2_main.c: use %pM to shown MAC address
Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29 20:05:37 -08:00
Heiko Carstens
1d802e2477 [S390] Use strim instead of strstrip to avoid false warnings.
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:33 +01:00
Jan Glauber
8bcd9b04fd [S390] qdio: add counter for input queue full condition
Add a counter to the qdio performance statistics that indicates that no
free buffers were left in the input queue. If the counter gets increased
it means that the qdio adapter filled all available buffers and possibly
had more buffers ready but could not transmit them.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:32 +01:00
Jan Glauber
7883097f16 [S390] qdio: remove superfluous log entries and WARN_ONs.
* Don't write debug feature log entries for sl, slsb and sbal since these
  elements can be located from the qdio_q pointer which is also logged.
* Convert WARN_ON for wrong alignment of sbal to BUG_ON.
* Remove WARN_ON's for wrong alignment of q / qib / slib since these
  alignments should be guaranteed by kmem_cache_alloc alignment /
  struct aligned attribute / __get_free_page.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:32 +01:00
Peter Oberparleiter
d302e1a5db [S390] cio: fix channel path vary
Channel path vary is currently broken: channel paths which are varied
offline are still used by Linux. The reason for this is that:

 * the path mask indicating which paths of an I/O device can be used
   is reset by each internal I/O request
 * the logic that checks if a path group is already in its designated
   target state incorrectly interprets the result "is correctly set"
   as "is correctly set and available"

Fix this by resetting the path mask only for internal I/O requests
which affect the path mask and by correcting the pgid check logic.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:32 +01:00
Julia Lawall
83e56d0b23 [S390] drivers: Correct size given to memset
Memset should be given the size of the structure, not the size of the pointer.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T *x;
expression E;
@@

memset(x, E, sizeof(
+ *
 x))
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:32 +01:00
Michael Holzheu
bb50991248 [S390] tape: Add pr_fmt() macro to all tape source files
Without defining the pr_fmt() macro, the "tape: " prefix will not be
printed when using the pr_xxx printk macros. This patch adds the
missing definitions.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:32 +01:00
Roel Kluin
2b31001d30 [S390] tty: PTR_ERR return of wrong pointer in fs3270_open()
Return the PTR_ERR of the correct pointer.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:31 +01:00
Roel Kluin
6d53cfe590 [S390] dasd: PTR_ERR return of wrong pointer in
Return the PTR_ERR of the correct pointer.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:31 +01:00
Stefan Haberland
ea05854454 [S390] dasd: move dasd-diag kmsg to dasd
The DIAG discipline does not have a own driver name. It shows up as
dasd-eckd or dasd-fba. So messages for dasd-diag are moved to the
generic dasd part.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:31 +01:00
Sebastian Ott
ffa8d2a3e8 [S390] cio: fix drvdata usage for the console subchannel
Using dev_set_drvdata prior to device_register will force the driver core
to kmalloc its private data. Since we use this for the console subchannel
lets set the drvdata before taking the subchannels spinlock.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18 17:43:31 +01:00
André Goddard Rosa
e7d2860b69 tree-wide: convert open calls to remove spaces to skip_spaces() lib function
Makes use of skip_spaces() defined in lib/string.c for removing leading
spaces from strings all over the tree.

It decreases lib.a code size by 47 bytes and reuses the function tree-wide:
   text    data     bss     dec     hex filename
  64688     584     592   65864   10148 (TOTALS-BEFORE)
  64641     584     592   65817   10119 (TOTALS-AFTER)

Also, while at it, if we see (*str && isspace(*str)), we can be sure to
remove the first condition (*str) as the second one (isspace(*str)) also
evaluates to 0 whenever *str == 0, making it redundant. In other words,
"a char equals zero is never a space".

Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below,
and found occurrences of this pattern on 3 more files:
    drivers/leds/led-class.c
    drivers/leds/ledtrig-timer.c
    drivers/video/output.c

@@
expression str;
@@

( // ignore skip_spaces cases
while (*str &&  isspace(*str)) { \(str++;\|++str;\) }
|
- *str &&
isspace(*str)
)

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:32 -08:00
Alexey Dobriyan
471452104b const: constify remaining dev_pm_ops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:25 -08:00
Linus Torvalds
d0316554d3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
  m68k: rename global variable vmalloc_end to m68k_vmalloc_end
  percpu: add missing per_cpu_ptr_to_phys() definition for UP
  percpu: Fix kdump failure if booted with percpu_alloc=page
  percpu: make misc percpu symbols unique
  percpu: make percpu symbols in ia64 unique
  percpu: make percpu symbols in powerpc unique
  percpu: make percpu symbols in x86 unique
  percpu: make percpu symbols in xen unique
  percpu: make percpu symbols in cpufreq unique
  percpu: make percpu symbols in oprofile unique
  percpu: make percpu symbols in tracer unique
  percpu: make percpu symbols under kernel/ and mm/ unique
  percpu: remove some sparse warnings
  percpu: make alloc_percpu() handle array types
  vmalloc: fix use of non-existent percpu variable in put_cpu_var()
  this_cpu: Use this_cpu_xx in trace_functions_graph.c
  this_cpu: Use this_cpu_xx for ftrace
  this_cpu: Use this_cpu_xx in nmi handling
  this_cpu: Use this_cpu operations in RCU
  this_cpu: Use this_cpu ops for VM statistics
  ...

Fix up trivial (famous last words) global per-cpu naming conflicts in
	arch/x86/kvm/svm.c
	mm/slab.c
2009-12-14 09:58:24 -08:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Linus Torvalds
382f51fe2f Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (222 commits)
  [SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP
  [SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class
  [SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED
  [SCSI] zfcp: Update FSF error reporting
  [SCSI] zfcp: Improve ELS ADISC handling
  [SCSI] zfcp: Simplify handling of ct and els requests
  [SCSI] zfcp: Remove ZFCP_DID_MASK
  [SCSI] zfcp: Move WKA port to zfcp FC code
  [SCSI] zfcp: Use common code definitions for FC CT structs
  [SCSI] zfcp: Use common code definitions for FC ELS structs
  [SCSI] zfcp: Update FCP protocol related code
  [SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport
  [SCSI] zfcp: Assign scheduled work to driver queue
  [SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore
  [SCSI] zfcp: Implement module unloading
  [SCSI] zfcp: Merge trace code for fsf requests in one function
  [SCSI] zfcp: Access ports and units with container_of in sysfs code
  [SCSI] zfcp: Remove suspend callback
  [SCSI] zfcp: Remove global config_mutex
  [SCSI] zfcp: Replace local reference counting with common kref
  ...
2009-12-09 19:42:25 -08:00
Linus Torvalds
67dd2f5a66 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (72 commits)
  [S390] 3215/3270 console: remove wrong comment
  [S390] dasd: remove BKL from extended error reporting code
  [S390] vmlogrdr: remove BKL
  [S390] vmur: remove BKL
  [S390] zcrypt: remove BKL
  [S390] 3270: remove BKL
  [S390] vmwatchdog: remove lock_kernel() from open() function
  [S390] monwriter: remove lock_kernel() from open() function
  [S390] monreader: remove lock_kernel() from open() function
  [S390] s390: remove unused nfsd #includes
  [S390] ftrace: build ftrace.o when CONFIG_FTRACE_SYSCALLS is set for s390
  [S390] etr/stp: put correct per cpu variable
  [S390] tty3270: move keyboard compat ioctls
  [S390] sclp: improve servicability setting
  [S390] s390: use change recording override for kernel mapping
  [S390] MAINTAINERS: Add s390 drivers block
  [S390] use generic sockios.h header file
  [S390] use generic termbits.h header file
  [S390] smp: remove unused typedef and defines
  [S390] cmm: free pages on hibernate.
  ...
2009-12-09 19:01:47 -08:00
Linus Torvalds
60d8ce2cd6 Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers, init: Limit the number of per cpu calibration bootup messages
  posix-cpu-timers: optimize and document timer_create callback
  clockevents: Add missing include to pacify sparse
  x86: vmiclock: Fix printk format
  x86: Fix printk format due to variable type change
  sparc: fix printk for change of variable type
  clocksource/events: Fix fallout of generic code changes
  nohz: Allow 32-bit machines to sleep for more than 2.15 seconds
  nohz: Track last do_timer() cpu
  nohz: Prevent clocksource wrapping during idle
  nohz: Type cast printk argument
  mips: Use generic mult/shift factor calculation for clocks
  clocksource: Provide a generic mult/shift factor calculation
  clockevents: Use u32 for mult and shift factors
  nohz: Introduce arch_needs_cpu
  nohz: Reuse ktime in sub-functions of tick_check_idle.
  time: Remove xtime_cache
  time: Implement logarithmic time accumulation
2009-12-08 19:27:08 -08:00
Linus Torvalds
d7fc02c7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
  mac80211: fix reorder buffer release
  iwmc3200wifi: Enable wimax core through module parameter
  iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
  iwmc3200wifi: Coex table command does not expect a response
  iwmc3200wifi: Update wiwi priority table
  iwlwifi: driver version track kernel version
  iwlwifi: indicate uCode type when fail dump error/event log
  iwl3945: remove duplicated event logging code
  b43: fix two warnings
  ipw2100: fix rebooting hang with driver loaded
  cfg80211: indent regulatory messages with spaces
  iwmc3200wifi: fix NULL pointer dereference in pmkid update
  mac80211: Fix TX status reporting for injected data frames
  ath9k: enable 2GHz band only if the device supports it
  airo: Fix integer overflow warning
  rt2x00: Fix padding bug on L2PAD devices.
  WE: Fix set events not propagated
  b43legacy: avoid PPC fault during resume
  b43: avoid PPC fault during resume
  tcp: fix a timewait refcnt race
  ...

Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
	kernel/sysctl_check.c
	net/ipv4/sysctl_net_ipv4.c
	net/ipv6/addrconf.c
	net/sctp/sysctl.c
2009-12-08 07:55:01 -08:00
Linus Torvalds
1557d33007 Merge git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6: (43 commits)
  security/tomoyo: Remove now unnecessary handling of security_sysctl.
  security/tomoyo: Add a special case to handle accesses through the internal proc mount.
  sysctl: Drop & in front of every proc_handler.
  sysctl: Remove CTL_NONE and CTL_UNNUMBERED
  sysctl: kill dead ctl_handler definitions.
  sysctl: Remove the last of the generic binary sysctl support
  sysctl net: Remove unused binary sysctl code
  sysctl security/tomoyo: Don't look at ctl_name
  sysctl arm: Remove binary sysctl support
  sysctl x86: Remove dead binary sysctl support
  sysctl sh: Remove dead binary sysctl support
  sysctl powerpc: Remove dead binary sysctl support
  sysctl ia64: Remove dead binary sysctl support
  sysctl s390: Remove dead sysctl binary support
  sysctl frv: Remove dead binary sysctl support
  sysctl mips/lasat: Remove dead binary sysctl support
  sysctl drivers: Remove dead binary sysctl support
  sysctl crypto: Remove dead binary sysctl support
  sysctl security/keys: Remove dead binary sysctl support
  sysctl kernel: Remove binary sysctl logic
  ...
2009-12-08 07:38:50 -08:00
Jiri Kosina
d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
Heiko Carstens
42d61b9b41 [S390] 3215/3270 console: remove wrong comment
When converting these two drivers from bootmem to slab allocations I
forgot to remove two comments which state that this wouldn't be
possible.
So remove them now since this caused confusion already.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:39 +01:00
Martin Schwidefsky
5e24eb08e8 [S390] dasd: remove BKL from extended error reporting code
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:39 +01:00
Martin Schwidefsky
3b47f9d5ec [S390] vmlogrdr: remove BKL
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:39 +01:00
Martin Schwidefsky
3c492d2033 [S390] vmur: remove BKL
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:39 +01:00
Martin Schwidefsky
b8ccc51f6f [S390] zcrypt: remove BKL
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:39 +01:00
Martin Schwidefsky
5cbb5f579e [S390] 3270: remove BKL
Replace BLK use in fs3270 with mutex.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:39 +01:00
Gerald Schaefer
feb5c5a450 [S390] vmwatchdog: remove lock_kernel() from open() function
The lock_kernel() calls in the open() function are unnecessary because
misc_register() is called last in module_init() and concurrent open()
calls are handled by other means.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:38 +01:00
Gerald Schaefer
801f97b7da [S390] monwriter: remove lock_kernel() from open() function
The lock_kernel() calls in the open() function are unnecessary because
misc_register() is called last in module_init() and concurrent open()
calls are handled by other means.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:38 +01:00
Gerald Schaefer
1963403aae [S390] monreader: remove lock_kernel() from open() function
The lock_kernel() calls in the open() function are unnecessary because
misc_register() is called last in module_init() and concurrent open()
calls are handled by other means.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:38 +01:00
Arnd Bergmann
9d4bfd4185 [S390] tty3270: move keyboard compat ioctls
All keyboard ioctls are compatible, so we can simply
move the compat handling into the vt and tty3270 drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:38 +01:00
Martin Schwidefsky
cb9d71604a [S390] sclp: improve servicability setting
Set dump indicator on read-scp-info command to get meaningful dumps.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:38 +01:00
Martin Schwidefsky
369a46325d [S390] tape: remove BKL from tape driver
Replace BLK with a per device mutex.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:36 +01:00
Martin Schwidefsky
8fd138c366 [S390] tape: cleanup reference counting
Rename tape_get_device to tape_find_device and tape_get_device_reference
to tape_get_device. The old names didn't make too much sense.

Follow the get_device()/put_device() semantic and convert tape_put_device
to a void function.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:36 +01:00
Martin Schwidefsky
1b52fff059 [S390] tape: fix tape remove function
Fix a bug introduced with git commit dff59b64af:
 -       if (cdev->dev.driver_data != NULL) {
 +       if (!dev_get_drvdata(&cdev->dev)) {
These two are not equivalent.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:36 +01:00
Martin Schwidefsky
c1b283d55d [S390] tape: remove f_pos changes from read / write function.
The change to f_pos in the read / write method has no effect as the
value is controlled by the VFS layer, e.g. for vfs_read:

	loff_t pos = file_pos_read(file);
	ret = vfs_read(file, buf, count, &pos);
	file_pos_write(file, pos);

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:36 +01:00
Felix Beck
93521314cb [S390] zcrypt: Do not simultaneously schedule hrtimer
Protect the hrtimer ap_poll_timer from being scheduled at the same
time from several processes.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:36 +01:00
Felix Beck
7a6f5cd07e [S390] zcrypt: adjust speed rating of cex3 adapters
Cex3 needs a lower speed rating. Otherwise cex2 adapters will be
prefered.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:36 +01:00
Felix Beck
18278dffc1 [S390] zcrypt: adjust speed rating between cex2 and pcixcc
Cards with lower speed rating are prefered. Thus change adjust the
speed rating of cex2c adapters to be prefered before pcixcc, although
they should not appear in the same machine anyway.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:35 +01:00
Felix Beck
8e89b6be76 [S390] zcrypt: use definitions for cex3
New definitions are added for CEX3 device types. They will be set
in the according probe functions. CEX3 device types will be handled
in the same modules as CEX2 device types. In the first step they are
the same as CEX2 types, but they can be adjusted for further
characteristics of CEX3 easily.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:35 +01:00
Felix Beck
ffda4f7198 [S390] zcrypt: add support for cex3 device types
This patch renames the CEX2C2 and CEX2A2 types to CEX3 device types.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:35 +01:00
Felix Beck
a6a5d73a56 [S390] zcrypt: special command support for cex3 exploitation
Support for special command is implemented in the AP Bus in the NQAP
function __ap_send. This is extended for a further parameter special.
When set, the special bit, in GR0 will be set. Therefor the ap_message
struct is extended for a further bit. Thus calling functions of
__ap_send can use the special parameter in ap_message to give to
__ap_send. Affected is in the first place ap_queue_message, which is
called by the actual card driver. The second part of this support is
that the card driver for the CEX3C needs to set this special bit, when
an according CPRB is sent to the driver.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:35 +01:00
Felix Beck
468ffddf19 [S390] zcrypt: initialize ap_messages for cex3 exploitation
AP messages need to be initialized, before they will be used. Values
will be zeroized. This will be needed later when introducing support
for the special commands.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:35 +01:00
Stefan Weinhuber
f4ac1d0255 [S390] dasd: let device initialization wait for LCU setup
The first DASD that is set online for a specific logical control unit
has to do certain setup steps on the storage server to make full use
of it, for example it will enable PAV.
The features and characteristics reported by the storage server will
depend on this setup, so all other devices on the same LCU will need
to wait for the setup to be finished.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:35 +01:00
Stefan Haberland
b8ed5dd548 [S390] dasd: remove strings from s390dbf
Remove strings from s390 debugfeature entries that could lead to a
crash when the data is read from dbf because the strings do not exist
any more.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:35 +01:00
Stefan Weinhuber
eb6e199bef [S390] dasd: improve error recovery for internal I/O
Most of the error conditions reported by a FICON storage server
indicate situations which can be recovered. Sometimes the host just
needs to retry an I/O request, but sometimes the recovery
is more complex and requires the device driver to wait, choose
a different path, etc.

The DASD device driver has a fully featured error recovery
for normal block layer I/O, but not for internal I/O request which
are for example used during the device bring up.
This can lead to situations where the IPL of a system fails because
DASD devices are not properly recognized.
This patch will extend the internal I/O handling to use the existing
error recovery procedures.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:34 +01:00
Stefan Weinhuber
626350b63e [S390] dasd: enable prefix independent of pav support
The DASD device driver needs to explicitly enable the prefix command
on the storage server, before it can be used. Originally we enabled
this command along with others only if we wanted to support PAV.
However, today we require this command for other features like
High Performance FICON as well, so we need to always enable prefix.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:34 +01:00
Christian Borntraeger
779c27820a [S390] dasd: remove dead code
the todclk.h header file is dead code. Remove it.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:34 +01:00
Stefan Weinhuber
22825ab769 [S390] dasd: support DIAG access for read-only devices
When a DASD device is used with the DIAG discipline, the DIAG
initialization will indicate success or error with a respective
return code. So far we have interpreted a return code of 4 as error,
but it actually means that the initialization was successful, but
the device is read-only. To allow read-only devices to be used with
DIAG we need to accept a return code of 4 as success.

Re-initialization of the DIAG access is also part of the DIAG error
recovery. If we find that the access mode of a device has been
changed from writable to read-only while the device was in use,
we print an error message.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:34 +01:00
Sebastian Ott
d40f7b75a2 [S390] cio: dont unregister a busy device in ccw_device_set_offline
If we detect a busy subchannel after the driver's set_offline
callback returned in ccw_device_set_offline, the current behavior
is to unregister the device, which may lead to undesired
consequences. Change this to just quiesce the subchannel and go on
with the offline processing.

Note: This is no excuse for not fixing these drivers -
after the set_offline callback they should have no running IO!

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:33 +01:00
Peter Oberparleiter
de1b04388f [S390] cio: improve error recovery for internal I/Os
Improve error recovery for internal I/Os by repeating each I/O
256 times per path to cope with long-running non-permanent error
conditions. Also retry each path twice to cope with link flapping,
i.e. single paths becoming unavailable in the order in which they
are tried.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:33 +01:00
Sebastian Ott
7a8ad1001c [S390] cio: change locking in io_subchannel_remove
IO subchannels are always unregistered in process context, so use
spin_lock_irq in the corresponding remove callback.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:33 +01:00
Sebastian Ott
6e9a0f67de [S390] cio: quiesce subchannel in io_subchannel_remove
Ensure that there will be no more interrupts for an
unregistered device by using the same quiesce and disable loop
as in io_subchannel_shutdown.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:32 +01:00
Sebastian Ott
0c609fca24 [S390] cio: handle busy subchannel in ccw_device_move_to_sch
Try to disable the old subchannel before we ask the driver core
to move the attached device to a new parent. This way we can use
the QUIESCE state during shutdown which prevents a possible use
after free situation in some error cases.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:32 +01:00
Sebastian Ott
ec64333c3a [S390] cio: handle failed disable_subchannel after device recognition
Handle a failing cio_disable_subchannel at the end of our device
recognition as if the recognition itself failed. This way
subsequent registration steps do not need to handle enabled
subchannels.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:32 +01:00
Sebastian Ott
56e6b796fe [S390] cio: fix quiesce state
DEV_STATE_QUIESCE is used to stop all IO on a busy subchannel.
This patch fixes the following problems related to the QUIESCE
state:

* Fix a potential race condition which could occur when the
resulting state was DEV_STATE_OFFLINE.

* Add missing locking around cio_disable_subchannel,
ccw_device_cancel_halt_clear and the cdev's handler.

* Loop until we know for sure that the subchannel is disabled.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:32 +01:00
Sebastian Ott
24a1872d64 [S390] cio: add per device initialization status flag
The function ccw_device_unregister has to ensure to remove
all references obtained by device_add and device_initialize.
Unfortunately it gets called for devices which are
1) uninitialized, 2) initialized but unregistered, and
3) registered devices. To distinguish 1) and 2) this patch
introduces a new flag "initialized", which is 1 as long as we
hold the initial device reference.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:32 +01:00
Sebastian Ott
7d253b9a1a [S390] cio: remove registered flag from ccw_device_private
We used to maintain a "registered" flag in our ccw_device_private
structure. This patch removes the "registered" flag and converts
all users of it to device_is_registered which has the exact same
meaning.

Note: The usage the atomic operation test_and_clear_bit is replaced
by the non-atomic if (device_is_registered()) device_del(). This
will not do harm, since we serialize calls to ccw_device_unregister
with a single-threaded workqueue.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:32 +01:00
Peter Oberparleiter
d7d12ef2be [S390] cio: make steal lock procedure more robust
An Unconditional Reserve + Release operation (steal lock) for a
boxed device may fail when encountering special error cases
(e.g. unit checks or path errors). Fix this by using the more
robust ccw_request infrastructure for performing the steal lock
CCW program.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:32 +01:00
Peter Oberparleiter
52ef0608e3 [S390] cio: use sense-pgid operation for path verification
Set-pgid operations fail for some device types under z/VM for which
the hypervisor has already set the pgid. Also reserved devices or
changed pgids are not correctly recognized. Fix these problems by
using a combination of sense-pgid and set-pgid and by also accepting
pre-defined pgid settings.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:31 +01:00
Peter Oberparleiter
454e1fa1eb [S390] cio: split PGID settings and status
Split setting (driver wants feature enabled) and status (feature
setup was successful) for PGID related ccw device features so that
setup errors can be detected. Previously, incorrectly handled setup
errors could in rare cases lead to erratic I/O behavior and
permanently unusuable devices.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:31 +01:00
Peter Oberparleiter
4257aaecff [S390] cio: remove intretry flag
After changing all internal I/O functions to use the newly introduced
ccw request infrastructure, retries are handled automatically after a
clear operation. Therefore remove the internal retry flag and
associated code.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:31 +01:00
Peter Oberparleiter
350e91207b [S390] cio: allow setting not-operational devices offline
Accept a request for setting a not-operational device offline.
This way, users can remove devices from Linux which would otherwise
remain unusable until reboot.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:31 +01:00
Peter Oberparleiter
9679baaf85 [S390] cio: use ccw request infrastructure for pgid
Use the newly introduced ccw request infrastructure to implement
pgid related operations: sense pgid, set pgid and disband pg.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:31 +01:00
Peter Oberparleiter
39f5360b3d [S390] cio: use ccw request infrastructure for sense id
Use the newly introduced ccw request infrastructure to implement
the sense id operation.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:31 +01:00
Peter Oberparleiter
e1f0fbd655 [S390] cio: consistent infrastructure for internal I/O requests
Reduce code duplication by introducing a central infrastructure to
perform an internal I/O operation on a CCW device.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:31 +01:00
Peter Oberparleiter
16b9a0571d [S390] cio: dont panic in non-fatal conditions
Remove the call to BUG() for situations which are unexpected
but do not cause actual problems.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:30 +01:00
Peter Oberparleiter
1f5bd3848b [S390] cio: ensure proper locking during device recognition
Device recognition needs to be started with the ccw device lock
held to prevent race conditions between I/O starting and interrupt
reception.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:30 +01:00
Peter Oberparleiter
7c4d964fa4 [S390] cio: handle error during path verification consistently
Handle verification errors consistently through the existing
callback ccw_device_done to reduce cleanup code duplication.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:30 +01:00
Peter Oberparleiter
736b5db895 [S390] cio: handle error during device recognition consistently
Remove the return code from ccw_device_recognition and handle
recognition errors through the existing callback
ccw_device_recog_done to reduce cleanup code duplication.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:30 +01:00
Peter Oberparleiter
a7ae2c02f5 [S390] cio: inform user when online/offline processing fails
Print a warning message in case a ccw device enters boxed or
not operational state during online/offline processing.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:30 +01:00
Peter Oberparleiter
37de53bb52 [S390] cio: introduce ccw device todos
Introduce a central mechanism for performing delayed ccw device work
to ensure that different types of work do not overwrite each other.
Prioritization ensures that the most important work is always
performed while less important tasks are either obsoleted or repeated
later.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:30 +01:00
Peter Oberparleiter
390935acac [S390] cio: introduce subchannel todos
Ensure that current and future users of sch->work do not overwrite
each other by introducing a single mechanism for delayed subchannel
work.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:30 +01:00
Peter Oberparleiter
5d6e6b6f6f [S390] cio: introduce parent-initiated device move
Change the initiative to update subchannel-ccw device associations
to the subchannel: when there is an indication that the internal
association no longer reflects the current hardware state, mark
each affected subchannel as requiring attention. Once processing
reaches a subchannel, determine the correct association for that
subchannel at that time and perform the necessary device_move
operations.

This change fixes problems with the previous approach which would
leave devices in an inconsistent state when a new hardware change
occurred while a device_move was already scheduled.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:29 +01:00
Peter Oberparleiter
60e4dac1ab [S390] cio: fix repeat setting of cdev parent association
sch_create_and_recog_new_device() associates a parent subchannel
with its ccw device child even though this is already done by
the subsequently called io_subchannel_recog(). Also make sure
io_subchannel_recog() sets the association under lock.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:29 +01:00
Peter Oberparleiter
48e4c385c5 [S390] cio: fix double free in case of probe failure
io_subchannel_probe() frees memory for sch->private which is later
freed again when io_subchannel_remove() is called. Fix this problem
by removing the cleanup in io_subchannel_probe().

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 12:51:29 +01:00
Adam Buchbinder
6070d81eb5 tree-wide: fix misspelling of "definition" in comments
"Definition" is misspelled "defintion" in several comments; this
patch fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 23:41:47 +01:00
Christof Schmitt
54987386ee [SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP
The flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP is never set and hence can
be removed. This is a leftover from the time when zfcp had to decide
whether the target supports a "logical unit reset" or not. Nowadays,
the SCSI midlayer calls the eh_device_reset_handler or the
eh_target_reset_handler and zfcp simply maps this to a "logical unit
reset" or a "target reset".

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:18 -06:00
Christof Schmitt
0fdd21330a [SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class
Enable the display of supported and active fc4s for zfcp in the FC
transport class. zfcp only supports FCP, so simply hard-code this
information.  The zfcp hbaapi already has this information hardcoded,
but this would allow to switch from the coding in the zfcp hbaapi to
the common FC transport attributes in the future.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:18 -06:00
Christof Schmitt
af4de36d91 [SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED
In case the SCSI error recovery starts because of a SCSI command
timeout, but then something else triggers the rport to be deleted, the
SCSI error recovery will run to the end and set the SCSI device
offline. To prevent this, call the FC transport function
fc_block_scsi_eh which waits until the rport leaves the BLOCKED state.
This guarantees that communication is possible if the rport is ONLINE,
or the SCSI devices will be removed if the rport state switches to
NOT_PRESENT.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:17 -06:00
Christof Schmitt
4c571c659e [SCSI] zfcp: Update FSF error reporting
The SCSI midlayer retries commands based on the remote port state and
the command status reported by the driver. Returning
DID_TRANSPORT_DISRUPTED is a better approach, use this for reporting
FSF errors back to the SCSI midlayer.  See
http://marc.info/?l=linux-scsi&m=125668044215051&w=2 as reference.

There is also no need in special treatment of ABORTED commands, so
remove the ZFCP_STATUS_FSFREQ_ABORTED, the commands are then returned
with DID_TRANSPORT_DISRUPTED.

Also remove the ZFCP_STATUS_FSFREQ_RETRY: It is useless, no retry is
happening in the FSF layer and nobody checks the state of this flag.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:16 -06:00
Christof Schmitt
ee744622c6 [SCSI] zfcp: Improve ELS ADISC handling
Introduce kmem_cache for ELS ADISC data to guarantee the required
hardware alignment and free the allocated memory in case the send
failes.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:16 -06:00
Christof Schmitt
7c7dc19681 [SCSI] zfcp: Simplify handling of ct and els requests
Remove some redundancies in FC related code and trace:
- drop redundant data from SAN trace (local s_id that only changes
  during link down, ls_code that is already part of payload, d_id in
  ct response trace that is always the same as in ct request trace)
- use one common fsf struct to hold zfcp data for ct and els requests
- leverage common fsf struct for FC passthrough job data, allocate it
  with dd_bsg_data for passthrough requests and unify common code for
  ct and els passthrough request
- simplify callback handling in zfcp_fc

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:15 -06:00
Christof Schmitt
800c0cad96 [SCSI] zfcp: Remove ZFCP_DID_MASK
Instead of assigning 4 bytes with the highest byte masked out, use a 3
byte array with the ntoh24 and h24ton helper functions, thus
eliminating the need for the ZFCP_DID_MASK.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:14 -06:00
Christof Schmitt
bd0072ecc4 [SCSI] zfcp: Move WKA port to zfcp FC code
The well-known-address (WKA) port handling code is part of the FC code
in zfcp. Move everything WKA related to the zfcp_fc files and use the
common zfcp_fc prefix for structs and functions. Drop the unused key
management service while renaming the struct, no request could ever
reach this service in zfcp and it is obsolete anyway.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:14 -06:00
Christof Schmitt
dbf5dfe9db [SCSI] zfcp: Use common code definitions for FC CT structs
Use common code definitions for FC GPN_FT and GID_PN
instead of inventing private ones. Move the private structs still
required inside zfcp to zfcp_fc header file.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:13 -06:00
Christof Schmitt
9d05ce2c0a [SCSI] zfcp: Use common code definitions for FC ELS structs
Use common code definitions for FC plogi, logo, rscn and adisc structs
instead of inventing private ones. Move the private struct for issuing
ELS ADISC inside zfcp to zfcp_fc header file.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:11 -06:00
Christof Schmitt
4318e08c84 [SCSI] zfcp: Update FCP protocol related code
Use common data structures for FCP CMND, FCP RSP and related
definitions and remove zfcp private definitions. Split the FCP CMND
setup and FCP RSP evaluation code in seperate functions. Use inline
functions to not negatively impact the I/O path.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:10 -06:00
Christof Schmitt
8830271c48 [SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport
If an error occurs that triggers the call to fc_remote_port_delete,
ideally this call would happen before any I/O is passed back to the
SCSI midlayer through scsi_done. The SCSI midlayer will retry the
commands and fc_remote_port_chkready will return the correct status
code.  But with the delay between calling scsi_done in softirq context
and the call to fc_remote_port_delete from the workqueue, there is a
window where zfcp returns DID_ERROR. This leads to SCSI error recovery
which then leads to offline SCSI devices since all recovery actions
will fail with the rport now being blocked.

In this window, zfcp has to return DID_IMM_RETRY just as the FC
transport class would do in fc_remote_port_chkready for the blocked
fc_rport. As soon as the fc_rport is BLOCKED, fc_remote_port_chkready
will do the right thing.

Additionally, there are two more cases to catch in zfcp_scsi_queuecommand:
- After the port has been opened, the unit has to be opened. During
  this period I/O has to be retried. This can also be handled with
  DID_IMM_RETRY.
- If the access to the unit fails, but the port is good, then
  this single unit cannot be accessed and I/O to this unit has to fail
  without involving the FC transport class.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:09 -06:00
Swen Schillig
9eae07ef6b [SCSI] zfcp: Assign scheduled work to driver queue
The port_scan work was scheduled to the work_queue provided by the
kernel. This resulted on SMP systems to a likely situation that more
than one scan_work were processed in parallel. This is not required
and openes the possibility of race conditions between the removal of
invalid ports and the enqueue of just scanned ports.  This patch
synchronizes the scan_work tasks by scheduling them to adapter local
work_queue.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:08 -06:00
Swen Schillig
6b183334c2 [SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore
The flag ZFCP_STATUS_COMMON_REMOVE was used to indicate that a
resource is not ready to be used or about to be removed from the
system. This is now better done by an improved list handling
and therefore the additional indicator is not required anymore.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:07 -06:00
Christof Schmitt
c1fad41764 [SCSI] zfcp: Implement module unloading
With the reference counting for zfcp data structures, it is now
possible to implement module unloading again. Module unloading
requires to free all data structures in the module exit function. This
is done by unregistering zfcp from s390 cio and the SCSI midlayer
first in the module exit function.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:06 -06:00
Christof Schmitt
d9742b42b5 [SCSI] zfcp: Merge trace code for fsf requests in one function
The latencies traced per fsf request are traced for sysfs output and
for blktrace, each in one function. Simplify the tracing code by
merging both tracing functions into one.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:05 -06:00
Christof Schmitt
25458eb791 [SCSI] zfcp: Access ports and units with container_of in sysfs code
When accessing port and unit attributes, use container_of instead of
dev_get_drvdata. This eliminates some code checker warnings about
aliased access of data structures.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:04 -06:00
Swen Schillig
b42aeceb35 [SCSI] zfcp: Remove suspend callback
The callback for suspend is not required because it contains exactly
the same functionality as the _set_offline routine does.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:03 -06:00
Swen Schillig
de3dc57214 [SCSI] zfcp: Remove global config_mutex
The global config_mutex was required for the serialization of a
configuration change within the zfcp driver.  This global locking is
now obsolete and can be removed.  The requirement of serializing the
access to a zfcp_adapter reference via a ccw_device is realized wth a
static spinlock.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:02 -06:00
Swen Schillig
f3450c7b91 [SCSI] zfcp: Replace local reference counting with common kref
Replace the local reference counting by already available mechanisms
offered by kref. Where possible existing device structures were used,
including the same functionality.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:02 -06:00
Swen Schillig
ecf0c7721b [SCSI] zfcp: Replace global config_lock with local list locks
The global config_lock was used to protect the configuration organized
in independent lists. It is not necessary to have a lock on driver
level for this purpose.  This patch replaces the global config_lock
with a set of local list locks.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:01 -06:00
Christof Schmitt
42e62a7437 [SCSI] zfcp: Adapt change_queue_depth for queue full tracking
Adapt the change_queue_depth callback in zfcp for the new reason
parameter. Simply pass each call back to the SCSI midlayer, there are
no resource adjustments necessary for zfcp.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>

Removes check for (depth <= default_depth) in case of
SCSI_QDEPTH_RAMP_UP call back, not needed after added
max_queue_depth per sdev.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:45 -06:00
Mike Christie
e881a172da [SCSI] modify change_queue_depth to take in reason why it is being called
This patch modifies scsi_host_template->change_queue_depth so that
it takes an argument indicating why it is being called. This will be
used so that if a LLD needs to do some extra processing when
handling queue fulls or later ramp ups, it can do so.

This is a simple port of the drivers setting a change_queue_depth
callback. In the patch I just have these LLDs adjust the queue depth
if the user was requesting it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>

[Vasu.Dev: v2
	Also converted pmcraid_change_queue_depth and then verified
all modules compile  using "make allmodconfig" for any new build
warnings on X86_64.

	Updated original description after combing two original
patches from Mike to make this patch git bisectable.]
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
[jejb: fixed up 53c700]
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:41 -06:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Uwe Kleine-König
fbfecd3712 tree-wide: fix typos "couter" -> "counter"
This patch was generated by

	git grep -E -i -l 'couter' | xargs -r perl -p -i -e 's/couter/counter/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:51 +01:00
David S. Miller
3505d1a9fd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/sfc/sfe4001.c
	drivers/net/wireless/libertas/cmd.c
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/staging/rtl8187se/Kconfig
	drivers/staging/rtl8192e/Kconfig
2009-11-18 22:19:03 -08:00
Heiko Carstens
302689ac47 net/s390 drivers: add missing 'const' attribute
Add missing 'const' attribute to avoid the following compile warnings:

drivers/s390/net/ctcm_main.c: In function 'ctcm_init':
drivers/s390/net/ctcm_main.c:1864: warning: assignment from incompatible pointer type
drivers/s390/net/lcs.c: In function 'lcs_init_module':
drivers/s390/net/lcs.c:2468: warning: assignment from incompatible pointer type
drivers/s390/net/claw.c: In function 'claw_init':
drivers/s390/net/claw.c:3408: warning: assignment from incompatible pointer type

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17 06:47:02 -08:00
Frank Blaschka
3fd434d846 qeth: allow dynamic change of rx checksumming
Technically there is no need to set the card offline to change
RX checksumming. Get rid of this stupid limitation.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:09 -08:00
Frank Blaschka
c3b4a740db qeth: rework TSO functions
The maximum TSO size OSA can handle is 15 * PAGE_SIZE. This
patch reduces gso_max_size to this value and adds some sanity
checks and statistics to the TSO implementation.
Since only layer 3 is able to do TSO move all TSO related functions
to the qeth_l3 module.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:08 -08:00
Ursula Braun
aa90922479 qeth: Recognize return codes of ccw_device_set_online
Setting a qeth device online requires to call function
ccw_device_set_online() for read-, write-, and data-subchannel.
Failures should be detected immediately without an attempt to
invoke follow-on activity qeth_qdio_clear_card().,

In addition, ccw_device_set_online calls are consolidated in
qeth_core_main.c only.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:07 -08:00
Ursula Braun
f20b04597b qeth: remaining EDDP cleanup
EDDP code has been removed from qeth in 2009. This patch removes two
useless remaining EDDP-references.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:06 -08:00
Einar Lueck
d64ecc22d0 qeth: Exploit Connection Isolation
Isolate data connection to a shared OSA card against other data
connections to the same OSA card. Connectivity between isolated
data connections sharing the same OSA card is therefore possible only
through external network gear (e.g. a router).

Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:05 -08:00
Ursula Braun
998221c26b netiucv: displayed TX bytes value much too high
tx_bytes value must be updated by skb length before skb is freed.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13 20:47:01 -08:00
Ursula Braun
0ca8cc6fe7 s390: remove cu3088 layer for lcs and ctcm
The cu3088-driver used as common base for lcs- and ctcm-devices
makes it difficult to assign the appropriate driver to an lcs-device
or a ctcm-device. This patch eliminates the cu3088-driver and thus
the root device "cu3088". Path /sys/devices/cu3088 is replaced with
the pathes /sys/devices/lcs and /sys/devices/ctcm.

Patch is based on a proposal from Cornelia Huck.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13 20:47:00 -08:00
Frank Blaschka
1e1815be87 ctcm: suspend has to wait for outstanding I/O
State transition to DEV_STATE_STOPPED indicates all outstanding I/O has
finished. Add wait queue to wait for this state.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13 20:46:59 -08:00
Martin Schwidefsky
8b94c1ed4d [S390] sclp: undo quiesce handler override on resume
In a system where the ctrl-alt-del init action initiated by signal
quiesce suspends the machine the quiesce handler override for
_machine_restart, _machine_halt and _machine_power_off needs to be
undone, otherwise the override is still present in the resumed
system. The next shutdown would then load the quiesce state psw
instead of performing the correct shutdown action.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-11-13 15:45:03 +01:00
Gerald Schaefer
ccaf655396 [S390] monreader: fix use after free bug with suspend/resume
The monreader device driver doesn't set dev->driver_data to NULL after
freeing the corresponding data structure. This leads to a use after
free bug in the freeze/thaw suspend/resume functions after the device
has been opened and closed once. Fix this by clearing dev->driver_data
in the close() function.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-11-13 15:45:03 +01:00
Eric W. Biederman
b05fd35d91 sysctl s390: Remove dead sysctl binary support
Now that sys_sysctl is a generic wrapper around /proc/sys  .ctl_name
and .strategy members of sysctl tables are dead code.  Remove them.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-12 02:05:01 -08:00
Martin Schwidefsky
3c5d92a0cf nohz: Introduce arch_needs_cpu
Allow the architecture to request a normal jiffy tick when the system
goes idle and tick_nohz_stop_sched_tick is called . On s390 the hook is
used to prevent the system going fully idle if there has been an
interrupt other than a clock comparator interrupt since the last wakeup.

On s390 the HiperSockets response time for 1 connection ping-pong goes
down from 42 to 34 microseconds. The CPU cost decreases by 27%.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
LKML-Reference: <20090929122533.402715150@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-11-05 07:53:53 +01:00
Linus Torvalds
7d531a7e51 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] smp: fix sigp sense handling
  [S390] smp: fix sigp stop handling
  [S390] cputime: fix overflow on 31 bit systems
  [S390] call home: fix string length handling
  [S390] call home: fix error handling in init function
  [S390] smp: fix prefix handling of offlined cpus
  [S390] s/r: cmm resume fix
  [S390] call home: fix local buffer usage in proc handler
2009-10-31 12:14:56 -07:00
Linus Torvalds
61aa1620be Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] zfcp: Flush SCSI registration work when adding unit
  [SCSI] zfcp: Fix timer initialization for ct and els requests
  [SCSI] zfcp: Warn about storage devices with broken PLOGI data
  [SCSI] zfcp: Handle WWPN mismatch in PLOGI payload
  [SCSI] zfcp: fix kfree handling in zfcp_init_device_setup
  [SCSI] fix memory leak in initialization
2009-10-29 09:16:01 -07:00
Heiko Carstens
e8a79c9ec7 [S390] call home: fix string length handling
After copying uts->nodename to the static nodename array the static
version isn't necessarily zero termininated, since the size of the
array is one byte too short.
Afterwards doing strncat(data, nodename, strlen(nodename)); may copy
an arbitrary large amount of bytes.
Fix this by getting rid of the static array and using strncat with
proper length limit.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-29 15:05:12 +01:00
Heiko Carstens
4a0fb4c445 [S390] call home: fix error handling in init function
Fix missing unregister_sysctl_table in case the SCLP doesn't provide
the requested feature. Also simplify the whole error handling while
at it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-29 15:05:12 +01:00
Martin Schwidefsky
8ca45667f9 [S390] s/r: cmm resume fix
If a suspended z/VM guest has been logged off before the resume the
'SET SMSG IUCV' CP command need to be repeated to reenable sending
message via SMSG. This fixes the following error:

HCPMFS057I H4214002 not receiving; SMSG off
Error: non-zero CP response for command 'SMSG H4214002 CMM SHRINK 5010': #57

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-29 15:05:12 +01:00
Sebastian Ott
3f0b3c33ee [S390] call home: fix local buffer usage in proc handler
Fix the size of the local buffer and use snprintf to prevent
further miscalculations. Also fix the usage of bitwise vs logic
operations.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-29 15:05:12 +01:00
Tejun Heo
390dfd95c5 percpu: make misc percpu symbols unique
This patch updates misc percpu related symbols such that percpu
symbols are unique and don't clash with local symbols.  This serves
two purposes of decreasing the possibility of global percpu symbol
collision and allowing dropping per_cpu__ prefix from percpu symbols.

* drivers/crypto/padlock-aes.c: s/last_cword/paes_last_cword/

* drivers/lguest/x86/core.c: s/last_cpu/lg_last_cpu/

* drivers/s390/net/netiucv.c: rename the variable used in a macro to
  avoid clashing with percpu symbol

* arch/mn10300/kernel/kprobes.c: replace current_ prefix with cur_ for
  static variables.  Please note that percpu symbol current_kprobe
  can't be changed as it's used by generic code.

Partly based on Rusty Russell's "alloc_percpu: rename percpu vars
which cause name clashes" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
2009-10-29 22:34:14 +09:00
Christof Schmitt
9e820afd0c [SCSI] zfcp: Flush SCSI registration work when adding unit
When configuring a LUN for use in zfcp, flush the SCSI work to ensure
the SCSI device has been created before returning. This means that a
configuration procedure can run these commands in a script and the
SCSI device is available immediately after the unit_add:

echo 1 > /sys/bus/ccw/drivers/zfcp/0.0.181d/online
echo 0x401040C300000000 > \
        /sys/bus/ccw/drivers/zfcp/0.0.181d/0x500507630313c562/unit_add
lsscsi

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22 09:38:51 +09:00
Christof Schmitt
9d38500de1 [SCSI] zfcp: Fix timer initialization for ct and els requests
Add HZ since the start_timer function expects jiffies, not seconds.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22 09:38:49 +09:00
Christof Schmitt
10d00f78e6 [SCSI] zfcp: Warn about storage devices with broken PLOGI data
After opening a remote port zfcp checks if the WWPN returned in the
PLOGI maches the WWPN of the port that should have been opened. On a
mismatch zfcp assumes that the DID just changed, queries the FC
nameserver and tries again. If the situation persists the erp will
give up.

With this strategy, if the remote port always returns the wrong PLOGI
data, the remote port will not be opened. Introduce a warning, so that
the system administrator knows why the remote port is not being opened
and to have a pointer to investigate the problem on the storage
system.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22 09:38:47 +09:00
Christof Schmitt
934aeb587b [SCSI] zfcp: Handle WWPN mismatch in PLOGI payload
For ports, zfcp gets the DID from the FC nameserver and tries to open
the port. If the open succeeds, zfcp compares the WWPN from the
nameserver with the WWPN in the PLOGI payload. In case of a mismatch,
zfcp assumes that the DID of the port just changed and we opened the
wrong port. This means that zfcp has to forget the DID, lookup the DID
again and retry.

This error case had a problem that zfcp forgets the DID, but never
looks up a new one, stalling the ERP in this case. Fix this by
triggering the DID lookup and properly exit from the ERP. The DID
lookup will trigger a new ERP action.

Also ensure when trying to open the port again with the new DID, first
close the open port, even in the NOESC case.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22 09:38:45 +09:00
Heiko Carstens
d10c0858f6 [SCSI] zfcp: fix kfree handling in zfcp_init_device_setup
The pointer that is allocated with kmalloc() is passed to strsep()
which modifies it. Later on the modified pointer value will be passed
to kfree. Save the original pointer and pass that one to kfree
instead.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22 09:38:42 +09:00
Einar Lueck
a1c1f5eab7 ctcm rollback in case of errors
Group device now cleanly reacts to failures during channel start and
implements a clean rollback.

Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17 23:57:24 -07:00
Klaus-Dieter Wacker
d816d42382 lcs: Recognize return codes of ccw_device_set_online().
The creation of a new lcs device requires a call to the function
ccw_device_set_online() for the read and the write channel. Failure
of either call should terminate the lcs device creation immediately
with return code -ENODEV.

Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17 23:57:22 -07:00
Klaus-Dieter Wacker
d62e09e34e lcs: ODEBUG: object is on stack, but not annotated.
Timer_list structure in lcs_send_lancmd() is allocated on stack.
Initialization with init_timer() leads to above ODEBUG message.
Instead use init_timer_on_stack() which prevents above msg.

Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-17 23:57:21 -07:00
Michael Holzheu
ac522b638d [S390] sclp_vt220 build fix
Fix this build error:

	next-20091013 randconfig build on s390x build breaks with

drivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn'

Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <michael.holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14 12:43:54 +02:00
Peter Oberparleiter
6d7c5afc89 [S390] cio: change misleading console logic
Use cio_is_console() in io_subchannel_probe to indicate that the
special handling is console specific. As long as there is no other
subchannel for which this might be true, it is misleading to speak
of "early devices". Should more of these devices be introduced,
a cleanup of all console special handling is in order anyway.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14 12:43:53 +02:00
Heiko Carstens
d3acf71fb8 [S390] call home support: fix proc handler
8d65af78 "sysctl: remove "struct file *" argument of ->proc_handler"
removed the struct file argument from all proc_handlers but didn't
change the call home proc handler (or call home was merged later).

So fix this now.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Hans-Joachim Picht <hans@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14 12:43:53 +02:00
Stefan Haberland
d9fa9441ed [S390] dasd: use idal for device characteristics
If the rdc_buffer is above 2G we need indirect addresssing so we have
to use an idaw to give the rdc_buffer to the ccw.
If the rdc_buffer is under 2G nothing changes.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14 12:43:53 +02:00
Stefan Haberland
a7602f6c16 [S390] dasd: fix locking bug
Replace spin_lock with spin_lock_irqsave in dasd_eckd_restore_device.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14 12:43:52 +02:00
Michael Holzheu
03cadd36d5 [S390] tape390: Fix request queue handling in block driver
When setting a channel attached tape online under Linux 2.6.31, the

"vol_id" process from udev hangs in sync_page():
 2 sync_page+144 [0x1dfaac]
 3 __wait_on_bit_lock+194 [0x58c23e]
 4 __lock_page+116 [0x1df9dc]
 5 truncate_inode_pages_range+728 [0x1ed7cc]
 6 __blkdev_put+244 [0x25f738]
 7 __fput+300 [0x229c4c]
 8 filp_close+122 [0x225a3a]

The reason for that is an error in the request queue handling. It can
happen that we fetch a request, but do not process it further because
the number of queued requests exceeds TAPEBLOCK_MIN_REQUEUE.
To fix this, we should call blk_peek_request() instead of
blk_fetch_request() in the while condition and fetch the request in
the loop body afterwards.

This bug was introduced with the patch "block: implement and enforce
request peek/start/fetch" (9934c8c045)

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-14 12:43:52 +02:00
Linus Torvalds
f144c78e52 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (21 commits)
  [S390] dasd: fix race condition in resume code
  [S390] Add EX_TABLE for addressing exception in usercopy functions.
  [S390] 64-bit register support for 31-bit processes
  [S390] hibernate: Use correct place for CPU address in lowcore
  [S390] pm: ignore time spend in suspended state
  [S390] zcrypt: Improve some comments
  [S390] zcrypt: Fix sparse warning.
  [S390] perf_counter: fix vdso detection
  [S390] ftrace: drop nmi protection
  [S390] compat: fix truncate system call wrapper
  [S390] Provide arch specific mdelay implementation.
  [S390] Fix enabled udelay for short delays.
  [S390] cio: allow setting boxed devices offline
  [S390] cio: make not operational handling consistent
  [S390] cio: make disconnected handling consistent
  [S390] Fix memory leak in /proc/cio_ignore
  [S390] cio: channel path memory leak
  [S390] module: fix memory leak in s390 module loader
  [S390] Enable kmemleak on s390.
  [S390] 3270 console build fix
  ...
2009-10-11 11:34:50 -07:00
Linus Torvalds
69585dd69e Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (34 commits)
  [SCSI] qla2xxx: Fix NULL ptr deref bug in fail path during queue create
  [SCSI] st: fix possible memory use after free after MTSETBLK ioctl
  [SCSI] be2iscsi: Moving to pci_pools v3
  [SCSI] libiscsi: iscsi_session_setup to allow for private space
  [SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driver
  [SCSI] zfcp: Fix hang when offlining device with offline chpid
  [SCSI] zfcp: Fix lockdep warning when offlining device with offline chpid
  [SCSI] zfcp: Fix oops during shutdown of offline device
  [SCSI] zfcp: Fix initial device and cfdc for delayed adapter allocation
  [SCSI] zfcp: correctly initialize unchained requests
  [SCSI] mpt2sas: Bump version 02.100.03.00
  [SCSI] mpt2sas: Support dev remove when phy status is MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT
  [SCSI] mpt2sas: Timeout occurred within the HANDSHAKE logic while waiting on firmware to ACK.
  [SCSI] mpt2sas: Call init_completion on a per request basis.
  [SCSI] mpt2sas: Target Reset will be issued from Interrupt context.
  [SCSI] mpt2sas: Added SCSIIO, Internal and high priority memory pools to support multiple TM
  [SCSI] mpt2sas: Copyright change to 2009.
  [SCSI] mpt2sas: Added mpi2_history.txt for MPI2 headers.
  [SCSI] mpt2sas: Update driver to MPI2 REV K headers.
  [SCSI] bfa: Brocade BFA FC SCSI driver
  ...
2009-10-11 11:12:33 -07:00
Stefan Haberland
6fca97a958 [S390] dasd: fix race condition in resume code
There is a race while re-reading the device characteristics. After
cleaning the memory area a cqr is build which reads the device
characteristics. This may take a rather long time and the device
characteristics structure is zero during this. Now it could be
possible that the block tasklet starts working and a new cqr will be
build. The build_cp command refers to the device characteristics
structure and this may lead into a divide by zero exception.
Fix this by re-reading the device characteristics into a temporary
structur and copy the data to the original structure. Also take the
ccwdev_lock.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:11 +02:00
Felix Beck
942b7e65c3 [S390] zcrypt: Improve some comments
Improve the comments for switch cases without a break. This fixes
some warnings of a code checker tool.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:09 +02:00
Felix Beck
6458abc925 [S390] zcrypt: Fix sparse warning.
Do not shadow earlier symbol.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:09 +02:00
Peter Oberparleiter
102e835d51 [S390] cio: allow setting boxed devices offline
Allow users to set boxed devices offline. After setting them
offline, the device state will still be boxed.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:07 +02:00
Peter Oberparleiter
6afcc775d9 [S390] cio: make not operational handling consistent
When a ccw device appears not operational, inform the associated
device driver and act according to the response: if the driver
wants to keep the device, put it into the disconnected state.
If not, or if there is no driver or if the device is not online,
unregister it. This approach is consistent with no-path event
handling.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:07 +02:00
Peter Oberparleiter
9a33211694 [S390] cio: make disconnected handling consistent
When there is no path left to a ccw device, inform the associated
device driver and act according to the response: if the driver
wants to keep the device, put it into the disconnected state.
If not, or if there is no driver or if the device is not online,
unregister it.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:07 +02:00
Christian Borntraeger
05d419b11f [S390] Fix memory leak in /proc/cio_ignore
There is a memory leak in /proc/cio_ignore. The iterator is allocated
in cio_ignore_proc_seq_start, but never freed in
cio_ignore_proc_seq_stop, because we cannot use the iterator
that was passed by seqfile. The seqfile interface passes the last
seen iterator to the stop function and not the first one. Since our
next function will return NULL at the end, the iter passed to
cio_ignore_proc_seq_stop is NULL. The original iter has leaked.
The solution is to use seq_open_private.

Found with kmemleak:
unreferenced object 0x1c720580 (size 32):
  comm "head", pid 973, jiffies 4294958302
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000000203154>] kmem_cache_alloc+0x190/0x19c
    [<00000000003fb462>] cio_ignore_proc_seq_start+0x5e/0x128
    [<0000000000231018>] seq_read+0xc8/0x4bc
    [<0000000000273954>] proc_reg_read+0xa8/0xf4
    [<000000000020e3d8>] vfs_read+0xac/0x1a4
    [<000000000020e5c6>] SyS_read+0x52/0xa8
    [<000000000011836e>] sysc_noemu+0x10/0x16
    [<0000004690b7936c>] 0x4690b7936c

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:07 +02:00
Michael Ernst
ec00440786 [S390] cio: channel path memory leak
Move dev_set_name to when we know that the device will actually be
registered in order to avoid a memory leak if the allocated memory
for the channel path has to be freed.

Signed-off-by: Michael Ernst <mernst@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:06 +02:00
Sebastian Ott
34483cac23 [S390] 3270 console build fix
Fix this build failure:
drivers/s390/built-in.o: In function `raw3270_pm_unfreeze':
(.text+0x3ac04): undefined reference to `ccw_device_force_console'
with:
CONFIG_TN3270=y
CONFIG_TN3270_CONSOLE=n
CONFIG_TN3215_CONSOLE=n

Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:05 +02:00
Ben Hutchings
df8b4ec8b1 qeth: Convert ethtool get_stats_count() ops to get_sset_count()
This string query operation was supposed to be replaced by the
generic get_sset_count() starting in 2007.  Convert qeth's
implementation.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05 00:10:09 -07:00
Christof Schmitt
d74cf7c3e9 [SCSI] zfcp: Fix hang when offlining device with offline chpid
Running chchp --vary 0 and chccwdev -d on a FCP device with scsi
devices attached can lead to this thread hanging:

================================================================
STACK TRACE FOR TASK: 0x2fbfcc00 (kslowcrw)

 STACK:
 0 schedule+1136 [0x45f99c]
 1 schedule_timeout+534 [0x46054e]
 2 wait_for_common+374 [0x45f442]
 3 blk_execute_rq+160 [0x217a2c]
 4 scsi_execute+278 [0x26daf2]
 5 scsi_execute_req+150 [0x26dc86]
 6 sd_sync_cache+138 [0x28460a]
 7 sd_shutdown+130 [0x28486a]
 8 sd_remove+104 [0x284c84]
 9 __device_release_driver+152 [0x257430]
10 device_release_driver+56 [0x2575c8]
11 bus_remove_device+214 [0x25672a]
12 device_del+352 [0x25456c]
13 __scsi_remove_device+108 [0x272630]
14 scsi_remove_device+66 [0x2726ba]
15 zfcp_ccw_remove+824 [0x335558]
16 ccw_device_remove+62 [0x2b3f2a]
17 __device_release_driver+152 [0x257430]
18 device_release_driver+56 [0x2575c8]
19 bus_remove_device+214 [0x25672a]
20 device_del+352 [0x25456c]
21 ccw_device_unregister+92 [0x2b48c4]
22 io_subchannel_remove+108 [0x2b4950]
23 css_remove+62 [0x2af7ee]
24 __device_release_driver+152 [0x257430]
25 device_release_driver+56 [0x2575c8]
26 bus_remove_device+214 [0x25672a]
27 device_del+352 [0x25456c]
28 device_unregister+38 [0x25464a]
29 css_sch_device_unregister+68 [0x2af97c]
30 ccw_device_call_sch_unregister+78 [0x2b581e]
31 worker_thread+604 [0x69eb0]
32 kthread+154 [0x6ff42]
33 kernel_thread_starter+6 [0x1c952]
================================================================

The problem is that the chchp --vary 0 leads to zfcp first calling
fc_remote_port_delete which blocks all scsi devices on the remote
port. Calling scsi_remove_device later lets the sd driver issue a
SYNCHRONIZE_CACHE command. This command stays on the "stopped" request
requeue because the SCSI device is blocked. Fix this by first removing
the scsi and fc hosts which removes all scsi devices and do not use
scsi_remove_device.

Reviewed-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:50:21 -05:00
Christof Schmitt
f45a54214a [SCSI] zfcp: Fix lockdep warning when offlining device with offline chpid
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.31-39.x.20090917-s390xdefault #1
-------------------------------------------------------
kslowcrw/83 is trying to acquire lock:
 (&adapter->scan_work){+.+.+.}, at: [<0000000000169c5c>] __cancel_work_timer+0x64/0x3d4

but task is already holding lock:
 (&zfcp_data.config_mutex){+.+.+.}, at: [<00000000004671ea>] zfcp_ccw_remove+0x66/0x384

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&zfcp_data.config_mutex){+.+.+.}:
       [<0000000000189962>] __lock_acquire+0xe26/0x1834
       [<000000000018a4b6>] lock_acquire+0x146/0x178
       [<000000000058cb5a>] mutex_lock_nested+0x82/0x3ec
       [<0000000000477170>] zfcp_fc_scan_ports+0x3ec/0x728
       [<0000000000168e34>] worker_thread+0x278/0x3a8
       [<000000000016ff08>] kthread+0x9c/0xa4
       [<0000000000109ebe>] kernel_thread_starter+0x6/0xc
       [<0000000000109eb8>] kernel_thread_starter+0x0/0xc

-> #0 (&adapter->scan_work){+.+.+.}:
       [<0000000000189e60>] __lock_acquire+0x1324/0x1834
       [<000000000018a4b6>] lock_acquire+0x146/0x178
       [<0000000000169c9a>] __cancel_work_timer+0xa2/0x3d4
       [<0000000000465cb2>] zfcp_adapter_dequeue+0x32/0x14c
       [<00000000004673e4>] zfcp_ccw_remove+0x260/0x384
       [<00000000004250f6>] ccw_device_remove+0x42/0x1ac
       [<00000000003cb6be>] __device_release_driver+0x9a/0x10c
       [<00000000003cb856>] device_release_driver+0x3a/0x4c
       [<00000000003ca94c>] bus_remove_device+0xcc/0x114
       [<00000000003c8506>] device_del+0x162/0x21c
       [<0000000000425ff2>] ccw_device_unregister+0x5e/0x7c
       [<000000000042607e>] io_subchannel_remove+0x6e/0x9c
       [<000000000041ff9a>] css_remove+0x3e/0x7c
       [<00000000003cb6be>] __device_release_driver+0x9a/0x10c
       [<00000000003cb856>] device_release_driver+0x3a/0x4c
       [<00000000003ca94c>] bus_remove_device+0xcc/0x114
       [<00000000003c8506>] device_del+0x162/0x21c
       [<00000000003c85e8>] device_unregister+0x28/0x38
       [<0000000000420152>] css_sch_device_unregister+0x46/0x58
       [<00000000004276a6>] io_subchannel_sch_event+0x28e/0x794
       [<0000000000420442>] css_evaluate_known_subchannel+0x46/0xd0
       [<0000000000420ebc>] slow_eval_known_fn+0x88/0xa0
       [<00000000003caffa>] bus_for_each_dev+0x7e/0xd0
       [<000000000042188c>] for_each_subchannel_staged+0x6c/0xd4
       [<0000000000421a00>] css_slow_path_func+0x54/0xd8
       [<0000000000168e34>] worker_thread+0x278/0x3a8
       [<000000000016ff08>] kthread+0x9c/0xa4
       [<0000000000109ebe>] kernel_thread_starter+0x6/0xc
       [<0000000000109eb8>] kernel_thread_starter+0x0/0xc

cancel_work_sync is called while holding the config_mutex. But the
work that is being cancelled or flushed also uses the config_mutex.
Fix the resulting deadlock possibility by calling cancel_work_sync
earlier without holding the mutex. The best place to do is is after
offlining the device.  No new port scan work will be scheduled for the
offline device, so this is a safe place to call cancel_work_sync.

Reviewed-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:50:10 -05:00
Christof Schmitt
1f99bd4cbf [SCSI] zfcp: Fix oops during shutdown of offline device
With the change that the zfcp_adapter struct is only allocated when
the device is set online, the shutdown handler has to check for a
non-existing zfcp_adapter struct. On the other hand, this check is not
necessary in the offline callback, since an online device has the
zfcp_adapter allocated and we go through the offline callback before
removing the ccw device.

Reviewed-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:49:59 -05:00
Christof Schmitt
c5afd81e5d [SCSI] zfcp: Fix initial device and cfdc for delayed adapter allocation
With the change for delaying the allocation of zfcp_adapter, the
initial device parameter function has to first call
ccw_device_set_online which allocates the zfcp_adapter structure.
Change this and adapt the cfdc part accordingly.

Reviewed-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:49:47 -05:00
Christof Schmitt
b1a5898585 [SCSI] zfcp: correctly initialize unchained requests
The common initialization of ct/gs and els requests missed the
initialization of unchained requests. Fix this by moving the common
parts to a place that is called for all ct/gs and els requests.

Reviewed-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:49:35 -05:00
Alexey Dobriyan
828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Alexey Dobriyan
2bcd57ab61 headers: utsname.h redux
* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 18:13:10 -07:00
Linus Torvalds
9fd815b55f Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (22 commits)
  [S390] Update default configuration.
  [S390] hibernate: Do real CPU swap at resume time
  [S390] dasd: tolerate devices that have no feature codes
  [S390] zcrypt: Do not add/remove devices in s/r callbacks
  [S390] hibernate: make sure pfn_is_nosave handles lowcore pages
  [S390] smp: introduce LC_ORDER and simplify lowcore handling
  [S390] ptrace: use common code for simple peek/poke operations
  [S390] fix disabled_wait inline assembly clobber list
  [S390] Change kernel_page_present coding style.
  [S390] hibernation: reset system after resume
  [S390] hibernation: fix guest page hinting related crash
  [S390] Get rid of init_module/delete_module compat functions.
  [S390] Convert sys_execve to function with parameters.
  [S390] Convert sys_clone to function with parameters.
  [S390] qdio: change state of all primed input buffers
  [S390] qdio: reduce per device debug messages
  [S390] cio: introduce consistent subchannel scanning
  [S390] cio: idset use actual number of ssids
  [S390] cio: dont kfree vmalloced memory
  [S390] cio: introduce css_settle
  ...
2009-09-23 10:02:14 -07:00
Stefan Weinhuber
68d1e5f08b [S390] dasd: tolerate devices that have no feature codes
The DASD device driver reads the feature codes of a device during
device initialization. These codes are later used to determine the
availability of advanced features like PAV or High Performance FICON.
Some very old devices do not support the command to read feature
codes and the initialization routine fails.
As the feature codes are not necessary for basic DASD operations, we
can support such devices by just ignoring missing feature codes.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-22 22:58:46 +02:00
Felix Beck
5314af693d [S390] zcrypt: Do not add/remove devices in s/r callbacks
Devices are no longer removed or added in the suspend and resume
callbacks. Instead they are marked unregistered in suspend. In the
resume callback the ap_scan_bus method is scheduled. The bus scan
function will remove the old device and add new ones. This way all
the device handling will be done in only one function. Additionaly
the case where the domain might change during suspend/resume is
caught. In that case the devices qid needs to re-calculated in
order of having it found by the scan method.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-22 22:58:46 +02:00