leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
811,442 Commits 2 Branches 0 Tags 5.1 GiB
f13c82e2e7
Commit Graph

18328 Commits

Author SHA1 Message Date
Olof Johansson
56acb3ef76 mvebu fixes for 5.0 
They are all device tree fixes which also worth being in stable:
 
  - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
    this area and crashing while doing it.
 
  - Use correct PCIe reset signal on MACCHIATOBin  (Armada 8040 based)
 
  - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXDjK7AAKCRALBhiOFHI7
 1eZfAJ0X/MrjG/MB1NSlJ2kUGmBs5MnnswCdFZpNF4okkjtwyWoCoBsp9X3kUkw=
 =vYNz
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 5.0

They are all device tree fixes which also worth being in stable:

 - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
   this area and crashing while doing it.

 - Use correct PCIe reset signal on MACCHIATOBin  (Armada 8040 based)

 - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)

* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-01-12 22:03:59 -08:00
Linus Walleij
b5f034845e ARM: dts: kirkwood: Fix polarity of GPIO fan lines 
These two lines are active high, not active low. The bug was
found when we changed the kernel to respect the polarity defined
in the device tree.

Fixes: 1b90e06b14 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan")
Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Julien D'Ascenzio <jdascenzio@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Reported-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Tested-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
 2019-01-10 12:23:47 +01:00
Peter Ujfalusi
c25748acc5 ARM: dts: da850-lcdk: Correct the sound card name 
To avoid  the following error:
asoc-simple-card sound: ASoC: Failed to create card debugfs directory

Which is because the card name contains '/' character, which can not be
used in file or directory names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
 2019-01-10 13:32:51 +05:30
Peter Ujfalusi
bd540ebe68 ARM: dts: da850-lcdk: Correct the audio codec regulators 
Add the board level fixed regulators for 3.3V and 1.8V which is used to
power - among other things - the tlv320aic3106 codec.

Apart from removing the following warning during boot:
tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22

With the correct voltages the driver can select correct OCMV value to
reduce pop noise.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
 2019-01-10 13:32:51 +05:30
Peter Ujfalusi
7fca69d4e4 ARM: dts: da850-evm: Correct the sound card name 
To avoid  the following error:
asoc-simple-card sound: ASoC: Failed to create card debugfs directory

Which is because the card name contains '/' character, which can not be
used in file or directory names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
 2019-01-10 13:32:51 +05:30
Peter Ujfalusi
706edaa888 ARM: dts: da850-evm: Correct the audio codec regulators 
Add the board level fixed regulators for 3.3V and 1.8V which is used to
power - among other things - the tlv320aic3106 codec.

Apart from removing the following warning during boot:
tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000

With the correct voltages the driver can select correct OCMV value to
reduce pop noise.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
 2019-01-10 13:32:51 +05:30
Linus Torvalds
85e1ffbd42 Kbuild late updates for v4.21 
- improve boolinit.cocci and use_after_iter.cocci semantic patches
 
 - fix alignment for kallsyms
 
 - move 'asm goto' compiler test to Kconfig and clean up jump_label
   CONFIG option
 
 - generate asm-generic wrappers automatically if arch does not implement
   mandatory UAPI headers
 
 - remove redundant generic-y defines
 
 - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcMV5GAAoJED2LAQed4NsGs9gQAI/oGg8wJgk9a7+dJCX245W5
 F4ReftnQd4AFptFCi9geJkr+sfViXNgwPLqlJxiXz8Qe8XP7z3LcArDw3FUzwvGn
 bMSBiN9ggwWkOFgF523XesYgUVtcLpkNch/Migzf1Ac0FHk0G9o7gjcdsvAWHkUu
 qFwtNcUB6PElRbhsHsh5qCY1/6HaAXgf/7O7wztnaKRe9myN6f2HzT4wANS9HHde
 1e1r0LcIQeGWfG+3va3fZl6SDxSI/ybl244OcDmDyYl6RA1skSDlHbIBIFgUPoS0
 cLyzoVj+GkfI1fRFEIfou+dj7lpukoAXHsggHo0M+ofqtbMF+VB2T3jvg4txanCP
 TXzDc+04QUguK5yVnBfcnyC64Htrhnbq0eGy43kd1VZWAEGApl+680P8CRsWU3ZV
 kOiFvZQ6RP/Ssw+a42yU3SHr31WD7feuQqHU65osQt4rdyL5wnrfU1vaUvJSkltF
 cyPr9Kz/Ism0kPodhpFkuKxwtlKOw6/uwdCQoQHtxAPkvkcydhYx93x3iE0nxObS
 CRMximiRyE12DOcv/3uv69n0JOPn6AsITcMNp8XryASYrR2/52txhGKGhvo3+Zoq
 5pwc063JsuxJ/5/dcOw/erQar5d1eBRaBJyEWnXroxUjbsLPAznE+UIN8tmvyVly
 SunlxNOXBdYeWN6t6S3H
 =I+r6
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - improve boolinit.cocci and use_after_iter.cocci semantic patches

 - fix alignment for kallsyms

 - move 'asm goto' compiler test to Kconfig and clean up jump_label
   CONFIG option

 - generate asm-generic wrappers automatically if arch does not
   implement mandatory UAPI headers

 - remove redundant generic-y defines

 - misc cleanups

* tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: rename generated .*conf-cfg to *conf-cfg
  kbuild: remove unnecessary stubs for archheader and archscripts
  kbuild: use assignment instead of define ... endef for filechk_* rules
  arch: remove redundant UAPI generic-y defines
  kbuild: generate asm-generic wrappers if mandatory headers are missing
  arch: remove stale comments "UAPI Header export list"
  riscv: remove redundant kernel-space generic-y
  kbuild: change filechk to surround the given command with { }
  kbuild: remove redundant target cleaning on failure
  kbuild: clean up rule_dtc_dt_yaml
  kbuild: remove UIMAGE_IN and UIMAGE_OUT
  jump_label: move 'asm goto' support test to Kconfig
  kallsyms: lower alignment on ARM
  scripts: coccinelle: boolinit: drop warnings on named constants
  scripts: coccinelle: check for redeclaration
  kconfig: remove unused "file" field of yylval union
  nds32: remove redundant kernel-space generic-y
  nios2: remove unneeded HAS_DMA define
 2019-01-06 16:33:10 -08:00
Linus Torvalds
926b02d3eb pci-v4.21-changes 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlwtMCIUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwQUQ/+P5/VDpo4abjudGO2c7FU1bJOwvfN
 cfV5dvDCw0kpx0Em5SmnpAD7Punllxxvb/04K75lqarGyx/Txqaw+lbIF+qSj6my
 GsQ16Iy8T48x5hr+Pf6vTh1eE+NaAVZfOPDOt7CyTNAgwfzHeVNyfNvz7pfKTIIJ
 Mk/jRE4kkeWo60jsY5p3sFo3OVOxBOsRdN+2sruaQuWFXrKHLyNDR+7Z9ZPxubFk
 cCO/TYPhNXmmKhCAR4V/rGiqz9OL2wyFixGhGhmD3tnC9nAb/wTMzjARsyBopBPi
 b/KkR2eLFEyXN0HJrwqxiURo4J3nveAYEuNXH5KjRBQZnoBCGSCIlqFhlrp9vdBk
 B4KIdT8h/M6LsVGeVSEIxIEXCp67YE31kxraFrk4Vsggdh2TFQ0llh1sajj8IFJB
 XekutedAOlTSOaM1/jvVPUJYg04X90bp3uXn3IU45XlQ8nBOG3immFVITRLkvd3w
 ywH+SEdeZAhWl3RGy8SHhqdeCJ7nNQbcRaRJ5CoWJBDNJTBGF1X+zJD2Swi6H9vA
 nWGNRlb3CPPIMPF127nADnOE7Cj2FlpAEIEu52HpcpIrhEdrGvLkGeQfgdWBjbyU
 aHwC04bLWnvsA9SEFVnuMIBaFQmJ1RuaWAHdtscyyO2uoeCtN8Aa+BX6jXFbVZQN
 9eFzpiv0kUiXlAQ=
 =g1ia
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - Remove unused lists from ASPM pcie_link_state (Frederick Lawler)

 - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
   King)

 - Expand Kconfig "PF" acronyms (Randy Dunlap)

 - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

 - Add missing include to drivers/pci.h (Alexandru Gagniuc)

 - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
   instead of xhci (Thinh Nguyen)

 - Clean up P2PDMA documentation (Randy Dunlap)

 - Allow runtime PM even if driver doesn't supply callbacks (Jarkko
   Nikula)

 - Remove status check after submitting Switchtec MRPC Firmware Download
   commands to avoid Completion Timeouts (Kelvin Cao)

 - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)

 - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
   (Joey Zhang)

 - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)

 - Add Switchtec MRPC DMA mode support (Wesley Sheng)

 - Skip VF scanning on powerpc, which does this in firmware (Sebastian
   Ott)

 - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)

 - Constify histb dw_pcie_host_ops structure (Julia Lawall)

 - Support multiple power domains for imx6 (Leonard Crestez)

 - Constify layerscape driver data (Stefan Agner)

 - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

 - Support armada8k GPIO reset (Baruch Siach)

 - Support suspend/resume support on imx6 (Leonard Crestez)

 - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

 - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

 - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

 - Mask DesignWare interrupts instead of disabling them to avoid lost
   interrupts (Marc Zyngier)

 - Add locking when acking DesignWare interrupts (Marc Zyngier)

 - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

 - Use devm resource parser in mediatek (Honghui Zhang)

 - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

 - Add UniPhier PCIe controller driver and DT bindings (Kunihiko
   Hayashi)

 - Enable MSI for imx6 downstream components (Richard Zhu)

* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
  PCI: imx: Enable MSI from downstream components
  s390/pci: skip VF scanning
  PCI/IOV: Add flag so platforms can skip VF scanning
  PCI/IOV: Factor out sriov_add_vfs()
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  PCI: Override Synopsys USB 3.x HAPS device class
  ...
 2019-01-05 17:57:34 -08:00
Masahiro Yamada
172caf1993 kbuild: remove redundant target cleaning on failure 
Since commit 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special
target"), the target file is automatically deleted on failure.

The boilerplate code

  ... || { rm -f $@; false; }

is unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
 2019-01-06 09:46:51 +09:00
Linus Torvalds
b23b0ea370 ARM: SoC: late updates 
A few updates that we merged late but are low risk for regressions for
 other platforms (and a few other straggling patches):
 
  - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
    here. They're for a driver for the PL353 SRAM controller and a build
    fix for the qualcomm scm driver.
  - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
    GPU, 256MB RAM, Wifi). This includes some acked platform-specific
    drivers (serial, etc). This also include DTs for two boards with this
    SoC, OrangePi 2G and OrangePi i86.
  - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
    video playback offload). This is the first i.MX 64-bit SoC.
  - Some minor updates to Samsung boards (adding a few peripherals in
    DTs).
  - Small rework for SMP bootup on STi platforms.
  - A couple of TEE driver fixes.
  - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
    enabled in defconfigs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwv4lAPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3JQsQAIcvwnI8rKPEskd20kNaj5bCUlG2hcIN/VoT
 scq1iCXpICOF53jBQvDoe48n+Ji4mI2VD7AIZD8XVppR+aHgpy8fkjX+uz8Ap0dG
 8B2y9vJ6nomrxKslnFEUk6LxpsaadpzTQDlcHAQvPdJxkvmMuA2b8LMGZhoAQ+dB
 lCw/qbjmoMEAV+dKXqRu62wwjZ10j4B7ex1XB1gnfjJYy+Splnd5fkdFCvd3wk+7
 BOH2iGROyLC0TC6ggqv45NNm6EykO9XqI5nq/3VHq9aBVJVWtFUQhDScjNf6qyYM
 mvUg6ZxmiTyIjhN+erttFXtxSKCH0BIdlBLZzaQ9W2XbTKMgzUlgK5GjQGqKCG6A
 QZHs9oe/TQuaHZ2ghMRbxcTWZC8Zdi1hYYa8fB7yNCZKnPNLRaA5P7O/3/s796B6
 DXpIHlU4lpyRdg26Zxh+FXYIXLsUYk9WNcwhjFbUQ/WXP3L9qf7FUU1EeSQeGDHU
 yRCE+kuKFs5FJnAZYXQ+0BCv0v8GFLMKTXDTbYtVFt0QDWVeeWwRt6gCOcHv1vBI
 IbZ0QLn1fzW2efgsXXB9i9VXO5AiP3EMx2A9Lqvrv+ufRXzQlBPbYZhN/Lp+BuDC
 moWdT5Cmye00uu35wY6H7Ycd+CO29dJ/B+hKbgqjyzFkZJiwWnPoeVQH2M1IkjOj
 IydIEbEo
 =qgZw
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull more ARM SoC updates from Olof Johansson:
 "A few updates that we merged late but are low risk for regressions for
  other platforms (and a few other straggling patches):

   - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
     here. They're for a driver for the PL353 SRAM controller and a
     build fix for the qualcomm scm driver.

   - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
     Vivante GPU, 256MB RAM, Wifi). This includes some acked
     platform-specific drivers (serial, etc). This also include DTs for
     two boards with this SoC, OrangePi 2G and OrangePi i86.

   - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
     video playback offload). This is the first i.MX 64-bit SoC.

   - Some minor updates to Samsung boards (adding a few peripherals in
     DTs).

   - Small rework for SMP bootup on STi platforms.

   - A couple of TEE driver fixes.

   - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
     enabled in defconfigs"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
  arm64: defconfig: Re-enable bcm2835-thermal driver
  MAINTAINERS: Add entry for RDA Micro SoC architecture
  tty: serial: Add RDA8810PL UART driver
  ARM: dts: rda8810pl: Add interrupt support for UART
  dt-bindings: serial: Document RDA Micro UART
  ARM: dts: rda8810pl: Add timer support
  ARM: dts: Add devicetree for OrangePi i96 board
  ARM: dts: Add devicetree for OrangePi 2G IoT board
  ARM: dts: Add devicetree for RDA8810PL SoC
  ARM: Prepare RDA8810PL SoC
  dt-bindings: arm: Document RDA8810PL and reference boards
  dt-bindings: Add RDA Micro vendor prefix
  ARM: sti: remove pen_release and boot_lock
  arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
  arm64: dts: imx8mq-evk: enable watchdog
  arm64: dts: imx8mq: add watchdog devices
  MAINTAINERS: add i.MX8 DT path to i.MX architecture
  arm64: add support for i.MX8M EVK board
  arm64: add basic DTS for i.MX8MQ
  ...
 2019-01-05 11:30:37 -08:00
Linus Torvalds
1205b62390 Included in this update: 
- Florian Fainelli noticed that userspace segfaults caused by the lack
   of kernel-userspace helpers was hard to diagnose; we now issue a
   warning when userspace tries to use the helpers but the kernel has
   them disabled.
 
 - Ben Dooks wants compatibility for the old ATAG serial number with DT
   systems.
 
 - Some cleanup of assembly by Nicolas Pitre.
 
 - User accessors optimisation from Vincent Whitchurch.
 
 - More robust kdump on SMP systems from Yufen Wang.
 
 - Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock"
   on RT kernels, and so we convert the Versatile series of platforms
   to use a raw spinlock instead, consolidating the Versatile
   implementation.  We entirely remove the boot_lock on OMAP systems,
   where it's unnecessary.  Further patches for other systems will be
   submitted for the following merge window.
 
 - Start switching old StrongARM-11x0 systems to use gpiolib rather
   than their private GPIO implementation - mostly PCMCIA bits.
 
 - ARM Kconfig cleanups.
 
 - Cleanup a mostly harmless mistake in the recent Spectre patch in 4.20
   (which had the effect that data that can be placed into the init
   sections was incorrectly always placed in the rodata section.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAXC9wVPTnkBvkraxkAQL9Ig/+Noy2YqJ/OpSvbsGC6k7qMU5b+99SW3Tu
 NvHLE7Y9XBp55QJqLvGW3N8QKOt86W7JVPprWoYiGqLyq3p8271IArrwdYjutn5h
 b03zVoMOW0o8q7uWjXbXk6vangsFGC/pI3o4aXrHUSCUR9ZttItpCprjdfVmwsA8
 EOROZ0lzMlsjwcBZQq/pflHNr6IiEtulaBTgFx2cqKHFoW4QpR4d8yupqi4kyLLP
 C+WVXmp2YaxNZMuBXbLHq28Spkkt/6yNFgxsCnleVaEYjbZ5TvIaZYrd20NN7KSE
 4smGfy5sgv5s1osxY00cVkvAARyRGrNIZ9Y3C1qH3+M+zaW3tsA46dUGC0cZmZPi
 OBRMx8SKqEwzPvL8Mhpj2aCOIzKtJzI52c6Oc4O/dwUZD7QIiA6yJrvmTbwvLDus
 korzyy1/YjpjGyDV2U3+eFalbwXdtsE6hh/Sv6LXIzX2KSLXd1LYyduYYc9hnh/m
 s99j3EGluRlMxB0IhcCOES4jEsAzttKdDXCPichxmjcsYWh1YZtoS+vKYVSXnv/S
 dJk0NuJcrmobV21qvr7U5C9mVek4DIF5CE2k3pcCmpbTk5G9nYMbCTBJWKdKq3WC
 z/oGhc/wwkfcFmqQrf9hJ+Fisn8uHmvE69X1QDe43nUg3xC6hD+O9+rVJhf+zAjB
 dgmMY+pPDHQ=
 =Yl96
 -----END PGP SIGNATURE-----

Merge tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this update:

   - Florian Fainelli noticed that userspace segfaults caused by the
     lack of kernel-userspace helpers was hard to diagnose; we now issue
     a warning when userspace tries to use the helpers but the kernel
     has them disabled.

   - Ben Dooks wants compatibility for the old ATAG serial number with
     DT systems.

   - Some cleanup of assembly by Nicolas Pitre.

   - User accessors optimisation from Vincent Whitchurch.

   - More robust kdump on SMP systems from Yufen Wang.

   - Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock"
     on RT kernels, and so we convert the Versatile series of platforms
     to use a raw spinlock instead, consolidating the Versatile
     implementation. We entirely remove the boot_lock on OMAP systems,
     where it's unnecessary. Further patches for other systems will be
     submitted for the following merge window.

   - Start switching old StrongARM-11x0 systems to use gpiolib rather
     than their private GPIO implementation - mostly PCMCIA bits.

   - ARM Kconfig cleanups.

   - Cleanup a mostly harmless mistake in the recent Spectre patch in
     4.20 (which had the effect that data that can be placed into the
     init sections was incorrectly always placed in the rodata section)"

* tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm: (25 commits)
  ARM: omap2: remove unnecessary boot_lock
  ARM: versatile: rename and comment SMP implementation
  ARM: versatile: convert boot_lock to raw
  ARM: vexpress/realview: consolidate immitation CPU hotplug
  ARM: fix the cockup in the previous patch
  ARM: sa1100/cerf: switch to using gpio_led_register_device()
  ARM: sa1100/assabet: switch to using gpio leds
  ARM: sa1100/assabet: add gpio keys support for right-hand two buttons
  ARM: sa1111: remove legacy GPIO interfaces
  pcmcia: sa1100*: remove redundant bvd1/bvd2 setting
  ARM: pxa/lubbock: switch PCMCIA to MAX1600 library
  ARM: pxa/mainstone: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/neponset: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/jornada720: switch PCMCIA to gpiod APIs
  pcmcia: add MAX1600 library
  ARM: sa1100: explicitly register sa11x0-pcmcia devices
  ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+
  ARM: 8812/1: Optimise copy_{from/to}_user for !CPU_USE_DOMAINS
  ARM: 8811/1: always list both ldrd/strd registers explicitly
  ARM: 8808/1: kexec:offline panic_smp_self_stop CPU
  ...
 2019-01-05 11:23:17 -08:00
Linus Torvalds
b7badd1d7a ARM: Device-tree updates 
As usual, this is where the bulk of our changes end up landing each
 merge window.
 
 The individual updates are too many to enumerate, many many platforms
 have seen additions of device descriptions such that they are
 functionally more complete (in fact, this is often the bulk of updates
 we see).
 
 Instead I've mostly focused on highlighting the new platforms below as
 they are introduced. Sometimes the introduction is of mostly a fragment,
 that later gets filled in on later releases, and in some cases it's
 near-complete platform support. The latter is more common for derivative
 platforms that already has similar support in-tree.
 
 Two SoCs are slight outliers from the usual range of additions. Allwinner
 support for F1C100s, a quite old SoC (ARMv5-based) shipping in the
 Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A,
 a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at
 infrastructure/networking.
 
 TI updates stick out in the diff stats too, in particular because they
 have moved the description of their L4 on-chip interconnect to devicetree,
 which opens up for removal of even more of their platform-specific
 'hwmod' description tables over the next few releases.
 
 SoCs:
  - Qualcomm QCS404 (4x Cortex-A53)
  - Allwinner T3 (rebranded R40) and f1c100s (armv5)
  - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
  - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)
 
 New platforms:
  - Rockchip: Gru Scarlet (RK3188 Tablet)
  - Amlogic: Phicomm N1 (S905D), Libretech S805-AC
  - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
  - Qualcomm: QCS404 base platform and EVB
  - Qualcomm: Remove of Arrow SD600
  - PXA: First PXA3xx DT board: Raumfeld
  - Aspeed: Facebook Backpack-CMM BMC
  - Renesas iWave G20D-Q7 (RZ/G1N)
  - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
  - Allwinner Emlid Neutis N5, Mapleboard MP130
  - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
  - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
  - VF610: Liebherr's BK4 device, ZII SCU4 AIB board
  - i.MX7D PICO Hobbit baseboard
  - i.MX7ULP EVK board
  - NXP LX2160AQDS and LX2160ARDB boards
 
 Other:
  - Coresight binding updates across the board
  - CPU cooling maps updates across the board
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqgVYPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3ybAQAKAhd7XI5oY/wgdZZmxwcX+p7sU6LXeIlpWU
 XsPN1c14KU0siQv/znVA5OpF+fgn9eRqfWnMoDPlvdScTq07FM2NBmOJfVJYDPJa
 uvsll5m+84FCYanIR//YybS0tCM0b0BHoHo2DoyIxWeAwmw7BBVslddBdNg6R7hG
 S9rU9rUeqfCj7HbcPLqVn0DecMtEe7R8zmDtG1CSMqrhncifmoV4gtUnbYAg0GGT
 cSvj/zT8A1j0oJcU2Upl/Fr+7WJ7XB9pnku91nUOSXLv5VkyctLGomKq5F7O2/Xs
 2DhpH2yKwQt7S7TDiDd0jy64Of6+Xup35wEHevCeKrzGXcVRqqHwCkanLz9FdjVt
 yg4UrI/P1nY7h4ifZPplgigv+kA+IjRGiMrTRIEgSE5YK9U5AYkgembTWksRDikd
 5EpeJcMj2tBv4SDellNNtzh6GGTPBf3GJw3P9uRuxnQY/T31N2eX0XGeRikL+Lzf
 9nbQdJealmql3rCa5oFEJwSxrSaAv/ub7/294kPdEmXj8+3qUuH3hZAZOI9LSXGW
 GCuxsgccB2GF1M48x48/QpHgxb93okyXmndONZnU8uN8ba0zS4b8QLwvIY5rqv5Z
 kqD1VPBQf9kGVyzDyABRjFmGCDJcoOJf4QrzvNk9+xo8fXVk1xNtxu4MUsHvc2lS
 cU2RYWm/
 =sFVi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "As usual, this is where the bulk of our changes end up landing each
  merge window.

  The individual updates are too many to enumerate, many many platforms
  have seen additions of device descriptions such that they are
  functionally more complete (in fact, this is often the bulk of updates
  we see).

  Instead I've mostly focused on highlighting the new platforms below as
  they are introduced. Sometimes the introduction is of mostly a
  fragment, that later gets filled in on later releases, and in some
  cases it's near-complete platform support. The latter is more common
  for derivative platforms that already has similar support in-tree.

  Two SoCs are slight outliers from the usual range of additions.
  Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping
  in the Lychee Pi Nano platform. At the other end is NXP Layerscape
  LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O
  aimed at infrastructure/networking.

  TI updates stick out in the diff stats too, in particular because they
  have moved the description of their L4 on-chip interconnect to
  devicetree, which opens up for removal of even more of their
  platform-specific 'hwmod' description tables over the next few
  releases.

  SoCs:
   - Qualcomm QCS404 (4x Cortex-A53)
   - Allwinner T3 (rebranded R40) and f1c100s (armv5)
   - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
   - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)

  New platforms:
   - Rockchip: Gru Scarlet (RK3188 Tablet)
   - Amlogic: Phicomm N1 (S905D), Libretech S805-AC
   - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
   - Qualcomm: QCS404 base platform and EVB
   - Qualcomm: Remove of Arrow SD600
   - PXA: First PXA3xx DT board: Raumfeld
   - Aspeed: Facebook Backpack-CMM BMC
   - Renesas iWave G20D-Q7 (RZ/G1N)
   - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
   - Allwinner Emlid Neutis N5, Mapleboard MP130
   - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
   - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
   - VF610: Liebherr's BK4 device, ZII SCU4 AIB board
   - i.MX7D PICO Hobbit baseboard
   - i.MX7ULP EVK board
   - NXP LX2160AQDS and LX2160ARDB boards

  Other:
   - Coresight binding updates across the board
   - CPU cooling maps updates across the board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits)
  ARM: dts: suniv: Fix improper bindings include patch
  ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards
  arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node
  ARM: dts: suniv: Fix improper bindings include patch
  arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  arm64: dts: Remove unused properties from FSL QSPI driver nodes
  ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
  ARM: dts: Remove unused properties from FSL QSPI driver nodes
  arm64: dts: ti: k3-am654: Enable main domain McSPI0
  arm64: dts: ti: k3-am654: Add McSPI DT nodes
  arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
  arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
  arm64: dts: ti: k3-am65-main: Add ECAP PWM node
  arm64: dts: ti: k3-am654-base-board: Add I2C nodes
  arm64: dts: ti: am654-base-board: Add pinmux for main uart0
  arm64: dts: ti: k3-am65: Add pinctrl regions
  dt-bindings: pinctrl: k3: Introduce pinmux definitions
  ARM: dts: exynos: Specify I2S assigned clocks in proper node
  ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
  ...
 2018-12-31 17:36:02 -08:00
Linus Torvalds
0922275ef1 ARM: SoC platform updates 
SoC updates, mostly refactorings and cleanups of old legacy platforms,
 but also a few more things:
 
 New SoC support this release:
  - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
  - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
 
 Cleanups of various platforms:
  - OMAP1 ams-delta does some GPIO cleanups
  - Davinci removes of at24 platform data
  - Samsung cleans up old wakeup, PM debug and secondary core boot code
  - Renesas moves around config options and PM code to drivers/soc for
    sharing with 64-bit and more consistency
  - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups
  - SoCFPGA adds explicit selection of ARM errata and removes some unused code
 
 This tag also contains a few patches that I had queued up as fixes for
 4.20 but didn't send in before the release.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqdD8PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3NQQP+gNhDCR01wy8EqmCuUn1nmoatnF9ViYER9yw
 tlWysax29ba5DGuSKkBCRooTDUNlVIMPdb7vE74CWoDVubexab67qFVJz+uRsXC5
 Gt/10STcU/i/Ga4bpkJxz47PfLHpVw1IwKUV1eoFWtLF7QQwfxiH8mr7vZj7XQo2
 3K95Adf13E6iIfbHcfBgEF0CjImUiZVq2E0DWMsE0Yti0ygVkNZeRXGHAUfQm/kD
 bBYOaHuuuiCXKp7dF9vzAC+iAqerudWYvxuHKPY0pU8T8hpj5P+UjGgCSeRdsLJz
 30MRr3t9WhPKvUYDVdIwsE5o1y1S2ZzO1FrTeRiJ8pem8PTliljXE3bIeTvu7uct
 n9lNquwvcjVutX7uYOesUmfGLGKQlCwwgg0l997OLe7/o9hzAdnptVvTciCVoanI
 r0ACjazbgIHGdb5rFLb5/Kkb+IqOc0d57CHiQacri1MN5zSQ9wLCZpXH8YEdibcI
 zY0DBlH2ga7Qh7rtlPi4I0gLNUG8jYclUwRbQYUKGlh0Bsv/J4abR49UC4byn2Vj
 kdEO1ASaNIwMJgBgSNAIoop/JhEnO+/ECJoB/pYCvNts6W/LckbMtPVhAofTIVTz
 B0pAexDPT4HW//vQ7iOmXraIeUi/HDTaT/64gWsoMnF6LntgcF79NDx4KJDXNRId
 Jra+EkHq
 =m7me
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms,
  but also a few more things:

  New SoC support this release:
   - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
   - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core

  Cleanups of various platforms:
   - OMAP1 ams-delta does some GPIO cleanups
   - Davinci removes of at24 platform data
   - Samsung cleans up old wakeup, PM debug and secondary core boot code
   - Renesas moves around config options and PM code to drivers/soc for
     sharing with 64-bit and more consistency
   - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
     console setups
   - SoCFPGA adds explicit selection of ARM errata and removes some
     unused code

  This also contains a few patches that I had queued up as fixes for
  4.20 but didn't send in before the release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: omap2: avoid section mismatch warning
  ARM: tegra: avoid section mismatch warning
  ARM: ks8695: fix section mismatch warning
  ARM: pxa: avoid section mismatch warning
  ARM: mmp: fix pxa168_device_usb_phy use on aspenite
  ARM: mmp: fix timer_init calls
  ARM: OMAP1: fix USB configuration for device-only setups
  ARM: OMAP1: add MMC configuration for Palm Tungsten E
  ARM: imx: fix dependencies on imx7ulp
  ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
  MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
  ARM: imx: add initial support for imx7ulp
  ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: davinci: da850-evm: remove unnecessary include
  ...
 2018-12-31 17:27:54 -08:00
Olof Johansson
c6f9fa88a3 Samsung DTS ARM changes for v4.21, part 2 
1. Add missing CPUs in cooling maps for Odroid X2 (missed in previous
    round of fixups).
 2. Fix clock configuration in audio subsystem on Odroid XU3/XU4.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAlwZT90QHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1+TxD/9eHjeon87f2f61FlO+u9+gN+kSwn1hwSj+
 bsz6GG0CuG5WWX5Lr8K5Uu+wtxEOfN4d1VoMH7rFiznkGxE5YpZc0hiK1qwsKtos
 E8IAAFjC+C4DpH8q1mojF9pSnLVpn+BFXsfR1JI4hgxrfwTKWJ8BJaNFdWOfFsyG
 1UduKVXgftnSF+iSVeX5vTRsQpBKPlm/5/ULhPyvJ+la9LzE6ZJ0E8hW3EgLtzQx
 T5BPyZlrd48EJHinO5imBy+h5z5Ca7Hg23twtBJC4ei0Zbc7KHXY6xxpKab7qLcs
 Zzs29R3PyNuOg1RTzZsIA+RxiytbRNjHhuPaP8XQa0i9WxkMgRRG7ITn2L4hLYvb
 ufME4mnQ4K8hCooV96gJvfzy9T5NYrNnmcKKnNLeAkcWHV/nXEyPVGXUYVMwTdev
 Zs9FWfn1E2fjCGu0sHp+PMQZXarEI0uC7tOnGROOHHKIxaH2Pf2OltVfJhGg29yu
 4+JCVJju/G328RfYgjb/GDoU1WHl+5mhs0NQxjxdG6cV83K7sNeUMMv+2se5NlRD
 xZYEAovzGogcOrOc1NlNzOQBwZlXdtFVz45em6qRFPomURgtLQuMZWSpPscRvajH
 Pn0FPK2ah80n8rSeHWx3nNuuUZcGT1g1muM3zxshNy+jOHwHzyM8Gp5fjrNQzZ4Q
 93jGdUPmMw==
 =dIrg
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/late

Samsung DTS ARM changes for v4.21, part 2

1. Add missing CPUs in cooling maps for Odroid X2 (missed in previous
   round of fixups).
2. Fix clock configuration in audio subsystem on Odroid XU3/XU4.

* tag 'samsung-dt-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Specify I2S assigned clocks in proper node
  ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
  ARM: dts: exynos: remove display-port node from Arndale
  ARM: dts: exynos: Add opp-suspend to DMC and leftbus devfreq OPPs on Exynos4
  ARM: dts: s5pv210: Add s5p-jpeg codec node.
  ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module
  ARM: dts: exynos: Add all CPUs in cooling maps
  ARM: dts: exynos: Clarify comment explaining purpose of Odroid XU3 DTSI
  ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Update maximum frequency for eMMC to 200MHz on Odroid XU3/XU4
  ARM: dts: exynos: Update maximum frequency for SD card to 200MHz on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Fix LDO13 min values on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Add UHS-I bus speed support to Odroid XU3/XU4/HC1
  ARM: dts: exynos: Add missing clocks to RTC node for Arndale board
  ARM: dts: exynos: Add compatible for s5m8767 clocks node on Itop Core
  ARM: dts: exynos: Add compatible for s2mps11 clocks node on Exynos542x

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-31 13:10:16 -08:00
Manivannan Sadhasivam
6fc66a5c68 ARM: dts: rda8810pl: Add interrupt support for UART 
Add interrupt support for UART in RDA Micro RDA8810PL SoC.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-31 13:09:58 -08:00
Manivannan Sadhasivam
5a9fe404b9 ARM: dts: rda8810pl: Add timer support 
Add timer support for RDA Micro RDA8810PL SoC.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-31 13:09:49 -08:00
Manivannan Sadhasivam
7581d836bd ARM: dts: Add devicetree for OrangePi i96 board 
Add initial devicetree for Orange Pi i96 board from Xunlong. It
is one of the 96Boards IoT Edition board.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-31 13:09:46 -08:00
Manivannan Sadhasivam
f0d319d26e ARM: dts: Add devicetree for OrangePi 2G IoT board 
Add initial devicetree support for OrangePi 2G IoT board from Xunlong.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-31 13:09:44 -08:00
Manivannan Sadhasivam
542e1c9dba ARM: dts: Add devicetree for RDA8810PL SoC 
Add initial device tree for RDA8810PL SoC from RDA Microelectronics.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-31 13:09:41 -08:00
Linus Torvalds
c6f1b355d4 New gcc-plugin: 
- Enable per-task stack protector for ARM (Ard Biesheuvel)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlwYN04WHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhUkD/4i0FW2fW1tY63lnbKhp6LFSGvF
 N7OdwPXwS5dlmVY8KFFrJp0GlT8qvJ3Kqwit5QTu9U9Mo32UbAVwB6gEW/kT3oB3
 Pk9pR/DMhTTxD6mUjIHq2c/IJgzw42slTbf1ezb5RtmFYaxqbX1A/wKes7ZTtp23
 JtNw2EkqDGMeMNDCbIZAaPHC7fwk6t40qgyrLOAHz+jnrL9tEd9/UIdqaRTn6HKE
 nslegmaDAUmPmmG8UK3RITQBD+FZsizcz/n2xKkCB79fld0qGwlUriacSmwVScBS
 LzGvVSrjUbfo/oo850RgrE48GxxlQntOF0z1foRQ7EFygk4gPPsqYRE9OvjE2Iid
 9BNtImt6mvOw7faD7sS6R9U5n/66Q3qlHi5FcU8ID6wVjwPM0RX0G4SDO/aTL//w
 FedMx4PPQtzQIH+X0WxI3mXreuEmN36rnQBR6XovBg2IBlmT6zMRXKhC+50U8+89
 WCUeWCuUz4p4daPgV4xKJu8H7EJxQN3YQ2IMStJCAgmrMAUX710pkJ5bt7meGg6Y
 LUPxRVBeQIC9UuJBDWzMbCYpHx/09o8FsFSEd/M6hW9NhGKo6PIGUu+1oy12LuqM
 eqb+m4wnylUXeaZnDTIYaVzwfCDCcMPTnt2X3Czc1huq8A5pGmfbUGBLMKHVoguA
 8J3bD55suTMTZut3vA==
 =AkLm
 -----END PGP SIGNATURE-----

Merge tag 'gcc-plugins-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull gcc-plugins update from Kees Cook:
 "Both arm and arm64 are gaining per-task stack canaries (to match x86),
  but arm is being done with a gcc plugin, hence it going through the
  gcc-plugins tree.

  New gcc-plugin:

   - Enable per-task stack protector for ARM (Ard Biesheuvel)"

* tag 'gcc-plugins-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ARM: smp: add support for per-task stack canaries
 2018-12-27 11:19:07 -08:00
Mark Brown
b27d9668be
Merge branch 'regulator-4.21' into regulator-next 2018-12-21 13:43:32 +00:00
Arnd Bergmann
3f47de2c6b Samsung DTS ARM changes for v4.21, part 2 
1. Add missing CPUs in cooling maps for Odroid X2 (missed in previous
    round of fixups).
 2. Fix clock configuration in audio subsystem on Odroid XU3/XU4.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAlwZT90QHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1+TxD/9eHjeon87f2f61FlO+u9+gN+kSwn1hwSj+
 bsz6GG0CuG5WWX5Lr8K5Uu+wtxEOfN4d1VoMH7rFiznkGxE5YpZc0hiK1qwsKtos
 E8IAAFjC+C4DpH8q1mojF9pSnLVpn+BFXsfR1JI4hgxrfwTKWJ8BJaNFdWOfFsyG
 1UduKVXgftnSF+iSVeX5vTRsQpBKPlm/5/ULhPyvJ+la9LzE6ZJ0E8hW3EgLtzQx
 T5BPyZlrd48EJHinO5imBy+h5z5Ca7Hg23twtBJC4ei0Zbc7KHXY6xxpKab7qLcs
 Zzs29R3PyNuOg1RTzZsIA+RxiytbRNjHhuPaP8XQa0i9WxkMgRRG7ITn2L4hLYvb
 ufME4mnQ4K8hCooV96gJvfzy9T5NYrNnmcKKnNLeAkcWHV/nXEyPVGXUYVMwTdev
 Zs9FWfn1E2fjCGu0sHp+PMQZXarEI0uC7tOnGROOHHKIxaH2Pf2OltVfJhGg29yu
 4+JCVJju/G328RfYgjb/GDoU1WHl+5mhs0NQxjxdG6cV83K7sNeUMMv+2se5NlRD
 xZYEAovzGogcOrOc1NlNzOQBwZlXdtFVz45em6qRFPomURgtLQuMZWSpPscRvajH
 Pn0FPK2ah80n8rSeHWx3nNuuUZcGT1g1muM3zxshNy+jOHwHzyM8Gp5fjrNQzZ4Q
 93jGdUPmMw==
 =dIrg
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM changes for v4.21, part 2

1. Add missing CPUs in cooling maps for Odroid X2 (missed in previous
   round of fixups).
2. Fix clock configuration in audio subsystem on Odroid XU3/XU4.

* tag 'samsung-dt-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Specify I2S assigned clocks in proper node
  ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2018-12-20 16:59:51 +01:00
Arnd Bergmann
984199efb0 Allwinner DT changes for 4.21 - round 2 
This is a small pull request for some lingering things that didn't make
 the first round of patches.
 
 First, the new suniv device tree included device tree headers for the
 clock and reset indices. These header filers are going in through the
 clock tree. Thus with the dt and core branches in arm-soc alone, it
 doesn't build. One fix is included to remove the #include statements.
 The defined macros aren't used yet as they were properly removed during
 the review phase.
 
 Second, Bluetooth using Broadcom (now Cypress) chips connected to UARTs
 on various boards is enabled using serdev and the updated bindings for
 Broadcom Bluetooth. The patch series had been sitting on the mailing
 lists for a month, and the driver bits were just merged on 2018/12/19.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAlwaELsOHHdlbnNAY3Np
 ZS5vcmcACgkQOJpUIZwPJDDIihAAmC72IrJ/hVJIToGoZfl/fUdqVcr82K04SsH0
 6jeIKVR3l8okb1xwA22bkq/VXppVz71cadvAPQzq9V+HrUS+tUyTkxWjW17pCFjb
 Bbbfbt7gV2Ki9wvPqZv0QCUA7jnWvUHYcuwWJC079D6FYFYbTs/LKvJfdKMAQ30d
 ptjWXFqiEwQ/AQ5/F1sCVxQdCLdW4tFAW+GMT+MjFGy1HTRdYbur3RMGYVcHIaNr
 3SFxffNkfDFeKlGOC1mV8S2bqr85ChXnVbzyw6kg4EmrpP3TSgEAgJjz/7H6kVB8
 LE6t1C1+slN+MzdcBr1YihIOA1gCOuf6BRDBN2+dPcmi9+XkrctgPmh2cdOs7x44
 YbD4kc4pETa8XNB+BXZD4jspBK4sLFymczsHu2wySS8m0tI13Cdcy/p5Khr3iwJY
 5N3U82H5jQjub1RE91xjXVWesMAzmX6dOI1mOzz252dSds5MZNUoGZywzX/pZ16/
 jKDR1kCO8JmZJxFf8ip+rRAT+QzKbZ73uCisca5lHuE73NyRQgWXBtfKAM5RArQu
 9CWRhiXxM0SuJ6cFb3lDS/v1FU0sZZhNLH3f8BeSw/pbzeHoR3+YQMbCKPq0vPu5
 1x7Y0xbSAeU4UljmJjYyvhNAOSYYaZiCDj7fkDrcPeplVg/7QckV+kTynrQ5VrdN
 9+jS6Ss=
 =FiER
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner DT changes for 4.21 - round 2

This is a small pull request for some lingering things that didn't make
the first round of patches.

First, the new suniv device tree included device tree headers for the
clock and reset indices. These header filers are going in through the
clock tree. Thus with the dt and core branches in arm-soc alone, it
doesn't build. One fix is included to remove the #include statements.
The defined macros aren't used yet as they were properly removed during
the review phase.

Second, Bluetooth using Broadcom (now Cypress) chips connected to UARTs
on various boards is enabled using serdev and the updated bindings for
Broadcom Bluetooth. The patch series had been sitting on the mailing
lists for a month, and the driver bits were just merged on 2018/12/19.

* tag 'sunxi-dt-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards
  ARM: dts: suniv: Fix improper bindings include patch

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2018-12-20 16:57:42 +01:00
Arnd Bergmann
f1a6caf73c Freescale QSPI device tree cleanup for 4.21: 
- It contains a series from Schrempf Frieder that cleans up FSL QSPI
    device tree nodes.  The current device trees are broken because they
    use an inconsistent scheme for assigning the reg properties.  It
    becomes a problem with ongoing QSPI driver under SPI framework.  So
    the cleanup is a preparation for new driver landing in the next
    cycle.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcFg+pAAoJEFBXWFqHsHzOC3UH/RsA0ysBXsaUF9aNpfmwFpKP
 bApnoyo+MhLZSvFqD8eU1K0BhXFOkOmMXMbTle0b3uF7qaknnXEoWTCNz+hJGDsz
 fFeOqz7xjyG8Q4U8PT4ImG0OPuFNNGBs1byJKZygxJp/xBlAGMKDp/rRKbM4c8+8
 WzoKcWcLqFe+Vau0vuesjcT7J/B3nWvzOWsWX5MHOp10rEWyv9Y4Ct3cAzSMVhAM
 1eLQpYegOvUckX0if7BZpj7vSIhDNp/urx6U7D5KGAf9iHK50euMX55LhveiSM8w
 CdnnZn2MUXEt2A81Aqb97IOhMsEra47Ffomr1nIV2OGbmDY27HrlUrNSEKNER28=
 =I3dR
 -----END PGP SIGNATURE-----

Merge tag 'imx-qspi-dt-clean' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Freescale QSPI device tree cleanup for 4.21:
 - It contains a series from Schrempf Frieder that cleans up FSL QSPI
   device tree nodes.  The current device trees are broken because they
   use an inconsistent scheme for assigning the reg properties.  It
   becomes a problem with ongoing QSPI driver under SPI framework.  So
   the cleanup is a preparation for new driver landing in the next
   cycle.

* tag 'imx-qspi-dt-clean' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  arm64: dts: Remove unused properties from FSL QSPI driver nodes
  ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
  ARM: dts: Remove unused properties from FSL QSPI driver nodes

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2018-12-20 16:53:54 +01:00
Maxime Ripard
ea09631536 ARM: dts: suniv: Fix improper bindings include patch 
The clock and reset bindings are going through different trees, and while
the patch doesn't contain any value defined in that header, it still
includes those files and result in a build breakage when building the DT
without the matching clock and reset patches applied.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2018-12-20 16:39:38 +01:00
Arnd Bergmann
826833df4e Add interconnect target module dts data for omaps for v4.21 
This big set of changes adds SoC specific l4 interconnect target module
 device tree data for am335x, am437x, omap5 and dra7 SoCs. We also move
 existing devices to the right location in the l4 interconnect hierarcy.
 This is similar to what we've already done for omap4 l4 interconnects
 earlier, and follows what is documented in the ti-sysc driver dts binding
 in Documentation/devicetree/bindings/bus/ti-sysc.txt.
 
 These changes will essentially replace the struct ti_sysc and clock
 entries in the arch/arm/mach-omap2/omap_hwmod_*_data.c files. Then a few
 merge windows later, we can start dropping the built-in platform data
 from the omap_hwmod_*_data.c files in favor of the device tree data only.
 For now, we verify the device tree data module data against the built-in
 data and warn about changes to prevent regressions.
 
 With the device tree data, we are also probing devices with the ti-sysc
 interconnect target module instead of omap_device. This fixes up the
 handling for multiple device instances in a single interconnect target
 module that has caused trouble earlier. A custom wrapper driver has been
 needed earlier for such cases.
 
 And as the device tree data is organized by the l4 interconnect instances,
 we will be able to use genpd later on. This is because each interconnect
 instance is also often also a single power domain.
 
 This series of changes has been brewing for several months now. I did not
 want to send a pull request earlier as people were still seeing device
 specific issues until recently though. However, it turned out that all the
 issues were quite trivial to fix. I had missed adding device tree ranges
 for the l3 data port used on some devices, and I had missed converting the
 device addresses for a few devices. And some devices like needed fixes for
 deferred probe handling such as the EHCI PHY for built-in case on omap5.
 
 Anyways, in case of trouble, we can easily just revert changes for a
 single device if needed.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlwSnO8RHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXPDYRAAxDrbMVGPnPtyR2uYI/xKdwB7wlJWZNWe
 nPOl1aMZ2bBmMH81WVXu6Q0h7kFC9Tuf3CG+xGdfT7XMgg28dOD0q3xfSyGwNn8q
 ftWVLpbsmc0Qp7h78lK16kbdRWp5N4Qb3QGelXfz/T5jX7NtfDhjZ5dfuZgb4W8r
 sI3gLeNEwK4hQB88kPmvuvXPqJflTGDKuXuNcR+jvvSVyl/vZq7akKLnGnSjaRHc
 qedh85c/UV/TBqlxnruW8K9J9Tg/DDImzWRpfZSbIT9Y6TiRmihUeffUZkEYHkMt
 tRg39nYeVq5BISccyGbT9AkkMqsjUAc7isBsBYWls9jpNwXHypMeHsqzraFcjgK+
 f5lPEWmCVy2gyGZB94jPnm6Du27JhCRfzjFNkGDZ0AHdmnuQ8fuas0z8cOvDa0oD
 sndg6nXmxnRr3+H5je10mVQaV6+EhP8DFe85KquM4anRo6LysZgBGkH2xG0iY64a
 vi59yiAfepZrtFIkaIypOUZvpFUUVXT0RDSW9K6dFEwYCMLfNww8W9paHVErY6HA
 aGTAn/rixUVBpEDH5d7eRK0Lk6swRk25zvYjGjppFGDEKjeztJaEVFRFYOrx6FTm
 LwW/DZe2P+AdVPgKVM4anVSELzt5zC3WgLkiA1/ijcrhZxh/BIuYhh2FbRKyMRhp
 t1h1SorsMT8=
 =9lDj
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.21/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Add interconnect target module dts data for omaps for v4.21

This big set of changes adds SoC specific l4 interconnect target module
device tree data for am335x, am437x, omap5 and dra7 SoCs. We also move
existing devices to the right location in the l4 interconnect hierarcy.
This is similar to what we've already done for omap4 l4 interconnects
earlier, and follows what is documented in the ti-sysc driver dts binding
in Documentation/devicetree/bindings/bus/ti-sysc.txt.

These changes will essentially replace the struct ti_sysc and clock
entries in the arch/arm/mach-omap2/omap_hwmod_*_data.c files. Then a few
merge windows later, we can start dropping the built-in platform data
from the omap_hwmod_*_data.c files in favor of the device tree data only.
For now, we verify the device tree data module data against the built-in
data and warn about changes to prevent regressions.

With the device tree data, we are also probing devices with the ti-sysc
interconnect target module instead of omap_device. This fixes up the
handling for multiple device instances in a single interconnect target
module that has caused trouble earlier. A custom wrapper driver has been
needed earlier for such cases.

And as the device tree data is organized by the l4 interconnect instances,
we will be able to use genpd later on. This is because each interconnect
instance is also often also a single power domain.

This series of changes has been brewing for several months now. I did not
want to send a pull request earlier as people were still seeing device
specific issues until recently though. However, it turned out that all the
issues were quite trivial to fix. I had missed adding device tree ranges
for the l3 data port used on some devices, and I had missed converting the
device addresses for a few devices. And some devices like needed fixes for
deferred probe handling such as the EHCI PHY for built-in case on omap5.

Anyways, in case of trouble, we can easily just revert changes for a
single device if needed.

* tag 'omap-for-v4.21/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Cosmetic fix for omap5 USB node names
  ARM: dts: Fix wrong address for omap5 sata phy
  ARM: dts: Add missing ranges for dra7 mcasp l3 ports
  ARM: dts: Fix ranges for am335x epwmss
  ARM: dts: Fix hsi gdd range for omap4
  ARM: dts: Add am335x mcasp with l3 data port ranges
  ARM: dts: Add missing ranges for am437x mcasp l3 ports
  ARM: dts: dra7: Move the ti,no-idle quirk on proper gmac node
  ARM: dts: Revert am335x mcasp ti-sysc changes
  ARM: dts: omap5: Add l4 interconnect hierarchy and ti-sysc data
  ARM: dts: Use dra7 mcasp compatible for mcasp instances
  ARM: dts: dra7: Move l4 child devices to probe them with ti-sysc
  ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data
  ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc
  ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data
  ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc
  ARM: dts: am437x: Add l4 interconnect hierarchy and ti-sysc data
  ARM: dts: dra7: convert to use new clkctrl layout
  ARM: dts: am43xx: convert to use new clkctrl layout
  ARM: dts: am33xx: convert to use new clkctrl layout

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2018-12-20 16:34:37 +01:00
Arnd Bergmann
bc8bd33891 arm: dts: zynq: DT changes for v5.0 
- Fix mmc node name
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlwSel4ACgkQykllyylKDCFGIwCfba/KcK8ZMpKE86H/maU8MBW4
 7gUAnA2qNoKk+0/kdZmN+SjG8iSNxbGG
 =qUE0
 -----END PGP SIGNATURE-----

Merge tag 'zynq-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx into next/dt

arm: dts: zynq: DT changes for v5.0

- Fix mmc node name

* tag 'zynq-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx:
  ARM: dts: Use mmc@ instead sdhci@

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2018-12-20 16:32:27 +01:00
Chen-Yu Tsai
afdd273e26 ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards 
This patch adds the Bluetooth node, and the underlying UART node if it's
missing, to the board device tree file for several boards. The LPO clock
is also added to the WiFi side's power sequencing node if it's missing,
to correctly represent the shared connections. There is also a PCM
connection for Bluetooth, but this is not covered in this patch.

These boards all have a WiFi+BT module from AMPAK, which contains one or
two Broadcom chips, depending on the model. The older AP6210 contains
two, while the newer AP6212 and AP6330 contain just one, as they use
two-in-one combo chips.

The Bluetooth side of the module is always connected to a UART on the
same pingroup as the SDIO pins for the WiFi side, in a 4 wire
configuration. Power to the VBAT and VDDIO pins are provided either by
the PMIC, using one or several of its regulator outputs, or other fixed
regulators on the board. The VBAT and VDDIO pins are shared with the
WiFi side, which would correspond to vmmc-supply and vqmmc-supply in the
mmc host node. A clock output from the SoC or the external X-Powers RTC
provides the LPO low power clock at 32.768 kHz.

All the boards covered in this patch are ones that do not require extra
changes to the SoC's dtsi file. For the remaining boards that I have
worked on, properties or device nodes for the LPO clock's source are
missing.

For the Cubietruck, the LPO clock is fed from CLK_OUT_A, which needs to
be muxed on pin PI12. This can be represented in multiple ways. This
patch puts the pinctrl property in the pin controller node. This is due
to limitations in Linux, where pinmux settings, even the same one, can
not be shared by multiple devices. Thus we cannot put it in both the
WiFi and Bluetooth device nodes. Putting it the CCU node is another
option, but Linux's CCU driver does not handle pinctrl. Also the pin
controller is guaranteed to be initialized after the CCU, when clocks
are available. And any other devices that use muxed pins are guaranteed
to be initialized after the pin controller. Thus having the CLK_OUT_A
pinmux reference be in the pin controller node is a good choice without
having to deal with implementation issues.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
 2018-12-19 17:26:14 +08:00
Maxime Ripard
b7b69fb840 ARM: dts: suniv: Fix improper bindings include patch 
The clock and reset bindings are going through different trees, and while
the patch doesn't contain any value defined in that header, it still
includes those files and result in a build breakage when building the DT
without the matching clock and reset patches applied.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
 2018-12-19 17:17:26 +08:00
Honghui Zhang
ebcd631df1 arm: dts: mt7623: Remove un-used property for PCIe 
The "num-lanes" property for PCIe is not used, remove it.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 2018-12-18 13:48:24 +00:00
Frieder Schrempf
4f15a4e0d2 ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller 
We will move the FSL QSPI driver to the SPI framework soon. To
prepare and to make sure the full buswidth is used (as it is with
the current driver), let's add the right properties.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2018-12-16 16:23:37 +08:00
Frieder Schrempf
00b79b07cb ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes 
The current driver does not use the reg properties, but we will
add a new driver soon. To make sure we have a consistent scheme,
let's fix the reg properties here.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2018-12-16 16:23:37 +08:00
Frieder Schrempf
63f2d2a340 ARM: dts: Remove unused properties from FSL QSPI driver nodes 
The properties 'bus-num', 'fsl,spi-num-chipselects' and
'fsl,spi-flash-chipselects' were never read by the driver
and can be removed.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2018-12-16 16:23:37 +08:00
Sylwester Nawrocki
8ac686d7df ARM: dts: exynos: Specify I2S assigned clocks in proper node 
The assigned parent clocks should be normally specified in the consumer
device's DT node, this ensures respective driver always sees correct clock
settings when required.

This patch fixes regression in audio subsystem on Odroid XU3/XU4 boards
that appeared after commits:

commit 647d04f8e0 ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined")
commit 995e73e55f ("ASoC: samsung: i2s: Fix rclk_srcrate handling")
commit 48279c53fd ("ASoC: samsung: i2s: Prevent external abort on exynos5433 I2S1 access")

Without this patch the driver gets wrong clock as the I2S function clock
(op_clk) in probe() and effectively the clock which is finally assigned
from DT is not being enabled/disabled in the runtime resume/suspend ops.

Without the above listed commits the EXYNOS_I2S_BUS clock was always set
as parent of CLK_I2S_RCLK_SRC regardless of DT settings so there was no issue
with not enabled EXYNOS_SCLK_I2S.

Cc: <stable@vger.kernel.org> # 4.17.x
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2018-12-13 21:56:07 +01:00
Markus Reichl
497f1bcb90 ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2 
While updating cooling maps, the exynos4412-prime.dtsi was left
untouched.  This is not a problem with Odroid U3 because it uses its own
map with fan (which was updated).  However the cooling maps of Odroid X2
rely only on exynos4412-prime.dtsi.

Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2018-12-13 21:43:55 +01:00
Tony Lindgren
c7a851b705 ARM: dts: Cosmetic fix for omap5 USB node names 
These should be now using offset from the module base and not the
full physical address.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2018-12-13 09:08:43 -08:00
Olliver Schinagl
c1132b0067
regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2 
The OLinuXino Lime2 has a big capacitor on its LDO3 output. It is
actually too large, causing the PMIC to shutdown when toggling the LDO3.

By enabling soft-start and ramp delay we increase the time for the
capacitor to charge lowering the current drain on the power regulator.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
 2018-12-13 16:39:57 +00:00
Tony Lindgren
b822233593 ARM: dts: Fix wrong address for omap5 sata phy 
Looks like I missed converting the omap5 sata phy addresses to use offset
from the module base instead of full physical address.

While at it, we can also more it to be a direct child of the interconnect
target module, it is not really a child of the ocp2scp control device.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 2018-12-12 17:50:14 -08:00
Olof Johansson
24161e726f Few device fixes for omaps 
Here's a collection of minor fixes for annoying usability issues
 people have noticed using various devices.
 
 There are two regression fixes:
 
 - A regression fix for omap5 usb3 dual role mode
 
 - A regression fix to ams-delta audio being muted permanently
 
 And two one-liners:
 
 - Fix polarity for am335x-pdu001 SD card detection
 
 - Fix non-working omap4-sdp Ethernet startup for rebind
 
 It would be nice to get these merged during the -rc cycle if
 possible. Naturally these can all wait for the merge window too
 if we start running out of time.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlwP3icRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNP7A//aAbGiahFlabg4gaSh/e9p1lvrOx2jQT8
 yMM3gQyq7f9S1T/ptM8yF+EY1BPRM8YZNy6lAYMRbx8cIuP+PXyZpsfF7/A6ONGp
 e6jpK+kb7QNedJGvlA+oW+OmsxeW65duywjIStn66JqYLJ10f4skE7mEFJOvbGp9
 mBSiFJdbN/Sfn6VxgGAXnHTTq1CZa/WjHIKtPhTiImRDA293iIdZESgH2VIZAr+f
 maBqrgg55MsNNVbfc5ah0Euqec9NZB8g0pf0CcyC9eQiOtJLy7E2IdIlWKZS2iir
 lG8lCW1+3jw86fXgM92gim54VqWGLMN4a2SxQW6yBf9pjapf4EqWwYWC2pSzKRns
 kaKY0qe96kl32/KyoN96Qx26YAAJZQ1FfbcW0/1gOJWiHgtOuOv3HKTZYlggIrGB
 v5iIdyUhGmOFKgWRSjYDwl355tyuP9qk3ibeWoD4SVvNdsIq7HRv1jAaAMclNgqc
 w+zvly4Mf5S9CAhAZdZQg5l/6fG7Y0v3vNzM139fKXcQZPw353qRvMvJz7ryZrfv
 HjTYgECAYOIpVN+3hP04S83DH614hHzfoNfrDnMtsDOog3Aa60v0cP8l4Ip5qdGg
 XVTV33hBRbnpQRS0aY4j5AGvxKnJu7hgTOOz00buq2NsMuhnrM9Fh8OlYuJ3BM3o
 lNFIe3k36b8=
 =mhE2
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.20/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Few device fixes for omaps

Here's a collection of minor fixes for annoying usability issues
people have noticed using various devices.

There are two regression fixes:

- A regression fix for omap5 usb3 dual role mode

- A regression fix to ams-delta audio being muted permanently

And two one-liners:

- Fix polarity for am335x-pdu001 SD card detection

- Fix non-working omap4-sdp Ethernet startup for rebind

It would be nice to get these merged during the -rc cycle if
possible. Naturally these can all wait for the merge window too
if we start running out of time.

* tag 'omap-for-v4.20/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 14:20:02 -08:00
Olof Johansson
4f474037cf Gemini DTS updates for v4.21: 
- Fix the erroneous partition table on D-Link DIR-685
 - Multiplex flash usage with other usage using pin control
   handling (merged to the MTD tree)
 - Use the RedBoot partition parser on SQ201
 - Add the USB blocks (DT bindings merged in the last merge
   window)
 - Bump the debounce times a bit to avoid bouncing
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcDEUHAAoJEEEQszewGV1zL38P/3QWEx2xK/2kvdXYfe/QowXg
 akdF1MgQ+0MH+fsA2TWbuRUL1yB+u9m7Vhy8CNsEu3w68Er6owcEuYu36crZjDDS
 8SymYJPQ9GUrrt+EAJ2OoxVcV+qoLJdWKnf3fbM6dNJxSzpxbsSmvT+8DomZTGd1
 VF5lGZdWNw1EMaj6W6o9fGnq03Yc7lBKFXLq0p1WOorYeogBN5VG3Yr4dCwUtJBM
 yG3XIGc+LpNgYlCTKfuiQu/DSA1Cd5VV4tx6+r/+Q2nf8JlmY1fGxUte1RiDoYHz
 a6g7UWRuercNoyA1C/CwXNmwRxmOBKpwL8ES8ZD5zFWDDM2uWNX6snflpNfyT/fN
 Wt2QZot+jcSutDBhpbWwVhKNW2EL6VtJhvUTTcDWVP7PxC/TXdRX0SZoH1xw53HK
 sooHcEBAnm05fQhCsohVxKzsIwXXhl/TTFW9Y38bE4BZ9Oy41fzuthLN59xJJest
 ZlN/vqkJ2rMiV5z/xaxV83Jeg4TOqDhlN7kMHwktw9nOqGfQzPCUY4F0/R3vyD4o
 Gigw0gY+8Od5PoAWVi5qIoOb08rXGOK1yRzXnaj4lTfOk2VOb7BM0sxUAzkWlaV4
 oEgVimWePfqYZNYluIbk9yuXxzDu1t+pwW64OfOmpnh6Rx1m/9mQUHFEF5AV57GE
 HlQ5XPFWsKTirdEhSarr
 =LrYy
 -----END PGP SIGNATURE-----

Merge tag 'gemini-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Gemini DTS updates for v4.21:
- Fix the erroneous partition table on D-Link DIR-685
- Multiplex flash usage with other usage using pin control
  handling (merged to the MTD tree)
- Use the RedBoot partition parser on SQ201
- Add the USB blocks (DT bindings merged in the last merge
  window)
- Bump the debounce times a bit to avoid bouncing

* tag 'gemini-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Bump Gemini platforms to use 100ms debounce
  ARM: dts: Add the FOTG210 USB host to Gemini boards
  ARM: dts: Fix up SQ201 flash access
  ARM: dts: Enable Gemini flash access
  ARM: dts: Fix up the D-Link DIR-685 MTD partition info

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 14:01:03 -08:00
Olof Johansson
69c5f266d8 Allwinner H3/H5 changes for 4.21 
Our usual pull request with the changes shared between the H3 and H5 SoCs.
 
 The major changes for this release are:
   - Addition of the video engine for the H5
   - H3 Camera support
   - New board: Emlid Neutis N5, Mapleboard MP130
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqJJwAKCRDj7w1vZxhR
 xTq4AP9SxrPeKDTBD4mKV+PVuJ2qq919M6o+mcxDkCecEMfbagD+JLkt2uGzdpb8
 eC6CuieHvJq1y/akfDpRBf0ZZD0/bw0=
 =yRd0
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner H3/H5 changes for 4.21

Our usual pull request with the changes shared between the H3 and H5 SoCs.

The major changes for this release are:
  - Addition of the video engine for the H5
  - H3 Camera support
  - New board: Emlid Neutis N5, Mapleboard MP130

* tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h5: Add Video Engine node
  ARM/arm64: dts: allwinner: Move H3/H5 syscon label over to soc-specific nodes
  arm64: dts: allwinner: h5: Add system-control node with SRAM C1
  ARM: dts: sun8i: h3: Fix the system-control register range
  ARM: dts: sun8i: Add the H3/H5 CSI controller
  ARM: dts: sun8i-h3: Add dts for the Mapleboard MP130
  arm64: dts: allwinner: new board - Emlid Neutis N5
  dt-bindings: vendor-prefix: new vendor - Emlid
  ARM: dts: sun8i-h3: add sy8106a to orange pi plus

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 13:59:58 -08:00
Ard Biesheuvel
189af46571 ARM: smp: add support for per-task stack canaries 
On ARM, we currently only change the value of the stack canary when
switching tasks if the kernel was built for UP. On SMP kernels, this
is impossible since the stack canary value is obtained via a global
symbol reference, which means
a) all running tasks on all CPUs must use the same value
b) we can only modify the value when no kernel stack frames are live
   on any CPU, which is effectively never.

So instead, use a GCC plugin to add a RTL pass that replaces each
reference to the address of the __stack_chk_guard symbol with an
expression that produces the address of the 'stack_canary' field
that is added to struct thread_info. This way, each task will use
its own randomized value.

Cc: Russell King <linux@armlinux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: kernel-hardening@lists.openwall.com
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
 2018-12-12 13:20:07 -08:00
Olof Johansson
33afb48f32 RV1108 improvements (uart-dma, clocks, interrupt numbers, gmac support 
timer and emmc pins) from its first real-world user.
 RK3188 improvements (OPPv2, cpu node updates) to prepare for a new
 devicetree, the BQ Edison 2 Quad-Core.
 VPU device node for rk3288, right now only the jpeg encoder part
 will be in the kernel but hopefully other codecs will follow.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlwQw64QHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgRFJB/0WHQQtzWXEtFYxgaoWFAgkK8/Lq2LxDBTa
 aMx+slPBqMEpLOP3jfxHRy4C+dL2GX2LgaHPJN1ImwSEjUAfPsfO47LNUBl4w0Sx
 t2ulAX/TC4wz5Wa78NsGxaszHgpxmDTYeO7ue1nYJ13YlJZ2MIp/Nr9903rWve6h
 hPSzkUVe4Vuiz+KLXchzkRWS13zVhy0t9FyPyhJqzZ4ESDhS74g6cm6wuUB0XHXS
 EHvhSvgdMa8x1/2flEIXGUAScAWydiglZcraNr3LmrN6dG8PS/IhbGsxp5KCzMTZ
 DAGR47tpbXQ1N5HZEqk30yiYMDN/cNeeo2wF9nR9Df//Bj/AwnI6
 =A+kY
 -----END PGP SIGNATURE-----

Merge tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

RV1108 improvements (uart-dma, clocks, interrupt numbers, gmac support
timer and emmc pins) from its first real-world user.
RK3188 improvements (OPPv2, cpu node updates) to prepare for a new
devicetree, the BQ Edison 2 Quad-Core.
VPU device node for rk3288, right now only the jpeg encoder part
will be in the kernel but hopefully other codecs will follow.

* tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add internal timer support for rv1108
  ARM: dts: rockchip: add BQ Edison 2 QC devicetree
  ARM: dts: rockchip: add VPU device node for RK3288
  ARM: dts: rockchip: update cpu supplies on rk3188
  ARM: dts: rockchip: add phandles to secondary cpu cores
  ARM: dts: rockchip: add cpu-core resets for rk3188
  ARM: dts: rockchip: convert rk3188 to opp-v2
  ARM: dts: rockchip: add #sound-dai-cells to Cortex-A9 i2s
  ARM: dts: rockchip: Add UART DMA support for rv1108
  ARM: dts: rockchip: Assign the proper GPIO clocks for rv1108
  ARM: dts: rockchip: Fix the PMU interrupt number for rv1108
  ARM: dts: rockchip: Pass the 'arm,cpu-registers-not-fw-configured' property on rv1108
  ARM: dts: rockchip: Pass the 'clock-latency' property on rv1108
  ARM: dts: rockchip: Add rv1108 GMAC support
  ARM: dts: rockchip: add rv1108 eMMC pin settings

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 13:06:47 -08:00
Olof Johansson
0abf32a837 AT91 DT for 4.21 
- Switch most platforms to the new clock binding
  - Small improvement for Axentia nattis
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlwP6RcACgkQAyWl4gNJ
 NJK0FRAAk6P948M5hxm+Q5LFGySuH4yeyucZV4MX82aB+eTE989eZccG4e3ez1ot
 /AU7WGZFjHB7bXlnuSHXmiwFeRU8w6nKBUzyCMI8Rs0XUueTNjvuqZvDbltcP8Z/
 g1VzTPUDtfnoJg6r7NvFHW9apEoHxYPzLXIQQBfZRcF7H3YqLGi3FxZNdS4Mvk9l
 woNK/5PzhYrep7YyuSDVtJv7ed9Q21mkNoEzjWONLiF5v2m6toSE5vwABoFlS5IF
 6/zHQiMKK7FYsdoXzuYbP+ymanD6vO60emJXpG2T7RAMb+CXXT8ttTieWM9RIusi
 rj/JkgPGvJik3xbjqa12TYsj4nGTO7h8IcM0F240s1BUYWscXIuWoT1FTde6542f
 5ACc9MQdWR/mIlwi6hY69dv941jGow9kcIN2VxMdSlGp7OVPNRPeJOkhBom1at/R
 GTdlNMK1qReWdvCs8zYMPS26YjV8GFHkOhKJb+TqCBUhMAfKpNoiW9CTzBmsB25J
 xFirZaf88Ya1bRtcIH1VxHtJu5ADQuuKNYDDwKQ6YZOwRraD0CnVaTs7NIIjCotq
 6BAIgW0zMKWMCDXJHPSNbJBU3VZOeWvhCM0wxPu3D9ZlCo08Vg7YhzRsWeKeF7jd
 /F15s02l+8oUb5n7EYdTfcdxIcjdkf68QX9PPNQEmOBZO9fZsG0=
 =l4zB
 -----END PGP SIGNATURE-----

Merge tag 'at91-4.21-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into next/dt

AT91 DT for 4.21

 - Switch most platforms to the new clock binding
 - Small improvement for Axentia nattis

* tag 'at91-4.21-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: nattis: initialize the BLON pin as output-low early
  ARM: dts: at91: at91sam9rl: switch to new clock bindings
  ARM: dts: at91: at91sam9x5: switch to new clock bindings
  ARM: dts: at91: at91sam9263: switch to new clock bindings
  ARM: dts: at91: at91sam9261: switch to new clock bindings
  ARM: dts: at91: at91sam9260: switch to new clock bindings
  ARM: dts: at91: sama5d2: switch to new clock binding
  ARM: dts: at91: sama5d4: switch to new clock bindings
  ARM: dts: at91: sama5d2: use the divided clock for SMC

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 13:04:41 -08:00
Olof Johansson
ac3e0be697 ARM: dts: Amlogic updates for v4.21, round 2 
Highlights
 - add CPU OPP tables
 - timers: add global timer and TWD
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlwOzBgACgkQWTcYmtP7
 xmXT1g/+LyEr7VDCf+AQOGMdkpQ/kivF6YoDmlj2wEO5v2qb1FpZIGfHsddDG+hZ
 mHDjsNDFowNODrzc3wmOJ5AfidGnZxgr9Thsm6ZDoMErgVfMeiBPJ7IjjbIGU8Zr
 a8hyBpOqrtR5gxeDg13jkRh+lxC+DFe6CjsF34JN3lwrUmfuzQNDAHWeXyKRiK0L
 fWcBFjd1kXYajWzRYDqqLfwpIxZH1YcQx5aREaCd5izV6mOBpJ6J3Jv2kSbBN1ld
 LOL+iPUFlhU5EvT0gaxT/Tr6SAws0XR3Rt1/ZwMt5GCM3vmvP4A/OJHcj0Gmk3EI
 UDH0utrtsPS7Gx+J7yG7jfEcxt1bUZ7KM8TbFw+Axf4wfWYZ4S3aWQfXfVPfDNtB
 zJWbZ2Q449lFqYyeS+UQVrsyLpTxLFQkohlHhJ0mq5sQdA3ARSyoxqOb6z4fOP0K
 vpYTKpmalS+EfINXkbBruxuJfZirJHO2LB94dy71OCoS4qCGN3ZFvWebpL/Fjwnx
 jiWHEdmWdo61X4mLplLm1fS0x1sdGgS/1OsiKutPiZlXmgK1kMYhRn83ZW5vbb2P
 RwsX0zlZWRy1lJ1go19CcMCFE5OXJ4ZxRv5ADakHYFg4rpx4EoMPkBPgNUbWW4WW
 bxy/STU3D+F8uhj5sf1uV1sc832mnGELic1A9DPGbG0L7/pdbQo=
 =qoPa
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

ARM: dts: Amlogic updates for v4.21, round 2

Highlights
- add CPU OPP tables
- timers: add global timer and TWD

* tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: meson8b: add the CPU OPP tables
  ARM: dts: meson: meson8: add the CPU OPP table
  ARM: dts: meson8b: add the Cortex-A5 global timer
  ARM: dts: meson8b: add the ARM TWD timer
  ARM: dts: meson8: add the Cortex-A9 global timer
  ARM: dts: meson8: add the ARM TWD timer
  ARM: dts: meson: group the Cortex-A5 / Cortex-A9 peripherals
  dt-bindings: clock: meson8b: export the CPU post dividers

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 13:02:51 -08:00
Olof Johansson
ba97d019fc UniPhier ARM SoC DT updates for v4.21 
- Add bindings for all SoCs/boards of UniPhier platform
 
 - Move binding docs to socionext directory
 
 - Add all CPUs in cooling maps
 
 - Add MIO DMAC nodes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcDpUOAAoJED2LAQed4NsGF5UP+QFPDavs9f3HYR+WJIP9FAk/
 yztsRuaygRuJdGwi7xHw1fDdi5N5u4O5olDTiULYDxd+GjlCgbgXB9MKLoVktB0z
 81MvrcAsh4d/NvU22R2QadsbeQdGLPRlfyRtwxi0DPzx/LAvUEGA29rFF4fTqYXw
 4Lm8UVJl+3yyfl8ysVHhgALmgwYGG/oC9wF/b2Y2/KuO6qm68yxYPX952G3j/AaH
 HXiWXdQzkYAP7nND8VcN8KBnlV/lJH/HanYVFgWzpV6Kwo7sUbNdMssePZQSsr+J
 6Fl36/VtzGTeUlP3tX07Hu4v1i4V09kmG3TLAB6XsIAohpq0g9LRGSrVIohShZGE
 lNiv2qrXUHUHBq+UoJQDjD/QEvaLTEo3g7S8hWBnPgMyPF8CyMsUYs6EhOuIiinM
 wtwtAE/EmigvY4xbElJG2WQ/svJmd3qrMazqot8nzPnIKz0FtMmA4jqAyhlmAs3K
 grH4hG5G0THpX2Netei1mCfb060CMvlabWRFZNjaFk6oxQN4n1J0AUXGeFiHK2Eg
 FkkVp5PiEg2dn1lhLiUyeauOVzrUKum2CBrLO9war4GLHaUynu4/8ZP+fVgJa3gb
 DMUh+j4ky/+iZcB5id59OIpALVZvpFk6FfgpFN5d2x4LpRmd1M0oPi+K9FYrmIQb
 kDx41tyCAx9npRmYN979
 =zPKy
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-dt-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM SoC DT updates for v4.21

- Add bindings for all SoCs/boards of UniPhier platform

- Move binding docs to socionext directory

- Add all CPUs in cooling maps

- Add MIO DMAC nodes

* tag 'uniphier-dt-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: add MIO DMAC nodes
  arm64: dts: uniphier: Add all CPUs in cooling maps
  ARM: dts: uniphier: Add all CPUs in cooling maps
  dt-bindings: uniphier: move cache-uniphier.txt to vendor directory
  dt-bindings: uniphier: add bindings for UniPhier SoC family

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 13:01:24 -08:00
Olof Johansson
fafda335f8 i.MX7ULP device tree for 4.21: 
- It includes the initial device tree for i.MX7ULP SoC and EVK board
    support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcDd7aAAoJEFBXWFqHsHzOgNEIAKc4dqYzWmfJTMnJGO+Bb1Rc
 BPkENpRWk6rWVBuxXwN4MTupXIgj96bBHWsg3kplgcthMRAl2wgomHTpNWXk8R9m
 Fn6sH9yIoeqr+xs6BzzQ8COrFBXg8CEZgKLgy+9nhfFi3xNf6pN6IQLgqrGF17MC
 zFH+sM0rqlh1l3BfHXMuwHvbhw+ms6Qo6z68OGSXmu0bUPThm2FV/Akivqp+INSI
 CeFyZ8RMTkEKVSkFEryZaprKgqlIYW2Kl54yeALjvG03mtn1onaZKqsNV7YonYMC
 X+mZPLnwjBUnLi2HbKrStmTR0ePQjg5x1tMT+Eco7Cjj4h6H6uBu0IYMi4PiN7o=
 =aOId
 -----END PGP SIGNATURE-----

Merge tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX7ULP device tree for 4.21:
 - It includes the initial device tree for i.MX7ULP SoC and EVK board
   support.

* tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx: add imx7ulp evk support
  ARM: dts: imx: add common imx7ulp dtsi support
  dt-bindings: fsl: add imx7ulp pm related components bindings
  dt-bindings: fsl: add compatible for imx7ulp evk
  clk: imx: add imx7ulp clk driver
  clk: imx: implement new clk_hw based APIs
  clk: imx: make mux parent strings const
  dt-bindings: clock: add imx7ulp clock binding doc
  clk: imx: add imx7ulp composite clk support
  clk: imx: add pfdv2 support
  clk: imx: add pllv4 support
  clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support
  clk: imx: add gatable clock divider support

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 12:56:36 -08:00
Olof Johansson
2b64645608 i.MX7D PICO boards update for 4.21: 
- It contains a series from Otavio Salvador that improves i.MX7D PICO
   SoM, and then adds Hobbit baseboard support on top of the improvement.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcDdI8AAoJEFBXWFqHsHzOqHoIAKr/bHhIQC1E57/tgaKASelW
 lFurkvfm9z0umfl+QW/PMvZF6DQ7IlDN3UuNhTHnqgIiFR3YO9GVX8j/+tmoUjr/
 oZeAQzkfffOGT5MXUfd7j7jX9y/nhnsE8AczQjkLt6LDLoRIrD5Tmgo4ka/aZDHB
 qj6at43cuHVea/36ZdO7dwH1zHpOQqyKRHoD1W+LNkfLIPkcMAt9UljhfjI2sJ/4
 f8RUxIYPXsWr2/DmbFNamUM34dPRmeO8++ZGj07OY8pVszsEis8VYxQEs85BaKoD
 YAqb0pl06gGK0b3A/JTWbo6iHx1QRIyiOCOGc7Nnx5PZi6Ad44XA3IbBHi7uh1s=
 =av9W
 -----END PGP SIGNATURE-----

Merge tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX7D PICO boards update for 4.21:
 - It contains a series from Otavio Salvador that improves i.MX7D PICO
  SoM, and then adds Hobbit baseboard support on top of the improvement.

* tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx7d-pico: Add the imx7d-pico-hobbit variant
  ARM: dts: imx7d-pico-pi: Extend peripherals support
  ARM: dts: imx7d-pico: Extend peripherals support
  ARM: dts: imx7d-pico: Improve WiFi regulator name
  ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIO
  ARM: dts: imx7d-pico: Pass the USBOTG1_PWR pinctrl
  ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsi
  ARM: dts: imx7d-pico: Switch to SPDX identifier
  ARM: dts: imx7d-pico: Do not harcode the memory size
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: imx51-zii-rdu1: Remove EEPROM node

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 12:55:34 -08:00
Olof Johansson
80b451cd68 i.MX device tree update for 4.21: 
- New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
    and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board.
  - Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature
    for flexcan, and enable devices on a few i.MX6 NXP boards.
  - Enable AUO G101EVN010 lcd panel and Goodix touch support for
    imx6ul-ccimx6ulsbcpro board.
  - Enable sensors support for imx6qdl-sabresd board: egalax touch, light,
    magnetometer and accelerometer sensor.
  - Switch more boards to use SPDX identifier.
  - Fix memory node duplication in i.MX device tree sources.
  - Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs.
  - Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid
    incorrect device matching.
  - Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which
    are now supported by the freedreno driver.
  - Add DCP device support for i.MX6ULL, which requires explicit clock
    enabling.
  - Add '#thermal-sensor-cells' for thermal device and '#cooling-cells'
    for cooling devices.
  - Add missing clock information for EPIT on i.MX25 SoC.
  - Add PWM and qdma devices for LS1021A SoC.
  - Update cooling maps of LS1021A SoC to include all devices affected by
    individual trip points.
  - Random device addition and cleanup on various boards.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcDcmeAAoJEFBXWFqHsHzO9uIH/2e87ayMkmIugUt57aJUOWRG
 pbNZZQXHsupVVu0VtYnKp3XBuhMXzvbhhihn9x9pyV+EJ2V4dgtU6gS2EDH2G9pl
 TCJItVDOZgllamIg2/McVkuQLsH8tEybud4wlWve96eP22mn6CyCPiDtmdvKYigA
 QQEFeSI8YgG1VLbXmhmox0HcowOm2C8asw8sSuo15Y2tWjAcCzKK0p3izRJQhSWn
 G/uAUwQQB7e2zrTXfTiJpMWEt664C0tqlhZLlfaPpvmufIbDcpbLHp7mK3iW0rZA
 Pjr1uT00rpnRkPkLvtT6tKTi2KviCwua1R58aUXW3ju1Fw6DJC1vSuPyNClCuyk=
 =dGG8
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree update for 4.21:
 - New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
   and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board.
 - Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature
   for flexcan, and enable devices on a few i.MX6 NXP boards.
 - Enable AUO G101EVN010 lcd panel and Goodix touch support for
   imx6ul-ccimx6ulsbcpro board.
 - Enable sensors support for imx6qdl-sabresd board: egalax touch, light,
   magnetometer and accelerometer sensor.
 - Switch more boards to use SPDX identifier.
 - Fix memory node duplication in i.MX device tree sources.
 - Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs.
 - Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid
   incorrect device matching.
 - Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which
   are now supported by the freedreno driver.
 - Add DCP device support for i.MX6ULL, which requires explicit clock
   enabling.
 - Add '#thermal-sensor-cells' for thermal device and '#cooling-cells'
   for cooling devices.
 - Add missing clock information for EPIT on i.MX25 SoC.
 - Add PWM and qdma devices for LS1021A SoC.
 - Update cooling maps of LS1021A SoC to include all devices affected by
   individual trip points.
 - Random device addition and cleanup on various boards.

* tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (82 commits)
  ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1
  ARM: dts: imx6ul: Remove extra space between node name and brace
  ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators
  ARM: dts: imx6ul: add flexcan support
  ARM: dts: imx5: add gpu nodes
  ARM: dts: imx6qdl-sabresd: add accelerometer sensor support
  ARM: dts: imx6qdl-sabresd: add magnetometer sensor support
  ARM: dts: imx6qdl-sabresd: add light sensor support
  ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus"
  ARM: dts: imx6qdl: Fix memory node duplication
  ARM: dts: imx6dl-mamoj: Add a memory node
  ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication
  ARM: dts: vf610-zii-scu4-aib: Add HI8435 support
  ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus
  ARM: dts: imx7s: Add flexcan stop mode wakeup support
  ARM: dts: imx6ul: Add flexcan stop mode wakeup support
  ARM: dts: imx6qdl: Add flexcan stop mode wakeup support
  ARM: dts: imx6sx: Add flexcan stop mode wakeup support
  ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variant
  ARM: dts: imx6ul-pico-hobbit: Extend peripherals support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 12:54:48 -08:00
Olof Johansson
df6aeaef1c Samsung DTS ARM changes for v4.21 
1. Add missing properties and nodes for PMIC clocks in multiple DTS
    files.
 2. Add UHS-I bus speed support to Odroid XU3/XU4/HC SD card and bump the
    maximum clock frequency to 200 MHz for SD and eMMC.
 3. Update cooling maps to include all CPU devices in multiple DTS files.
 4. Enable quirks for Exynos3250 DWC.
 5. Add JPEG CODEC node to S5Pv210.
 6. Add opp-suspend to devfreq OPPs on Exynos4 boards to fix resuming
    from suspend to RAM.
 7. Remove eDP from Arndale board as it does not work and breaks also
    DSI.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAlwM9qYQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD19FRD/9UOxxl+TzUq0BW1lTb6I6hTE44FRagBv4i
 saKFnE9652cGx+XEJhKYz7wGyVRB4QSIwo5eyPN7XyN4vAo9TNLgIEuvDYkYoPJ0
 w6Z4ji9iKqcS95KOcSyRKR9ujdrSK8mv9NCSHPIRKwbloycb7CASolUSs7NcDG33
 EJUB+qXs+PIqXA0iP0KZuzmtLe5MgzwwjtwHroDzGVbs0iPu/jv5hx9GiwnkuDXe
 3M1uvc2wJffyUAsNVjCTEsII3R8RQK/PA4IYnD1crxBNSwd+pLqAsIRRkhwKkFTg
 qnZMRqBtpdKilWUFkwEHnlL5/M4JQDcLNfq6x8qcRJxdi0cz3kf26JsxNOhSTp5m
 1pBzVyoG33czUF65o1kBDLOFNlQkwxzmqdURoXf0ZEsgkKWI+xWg/8a+BWwd1m+e
 Cn+odvNcV4iOTn5oeMFg1RDBT3PQgKCjCoIOqUEzQjDAgfh2MyLf8f1VndfoMzRu
 sfnrzEjfjFwCR+/kX3Z3zaAoTQVs/fWcOVm4QGGRAa2HSdQeIa5p+JGuL24i65Bi
 AOZMPktl15zjRnfTvtve+3EOvo/uZrOmlkzCiHYQMZK/vITBJvv8tfxt8XLljhq7
 LIhoWhqvdFlWiYzmYRHhgom1vepyIuLQdplzC4ePkFQqsDlZMT3x/wTpF5s6tkkC
 g6goNf1ZDQ==
 =nycP
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM changes for v4.21

1. Add missing properties and nodes for PMIC clocks in multiple DTS
   files.
2. Add UHS-I bus speed support to Odroid XU3/XU4/HC SD card and bump the
   maximum clock frequency to 200 MHz for SD and eMMC.
3. Update cooling maps to include all CPU devices in multiple DTS files.
4. Enable quirks for Exynos3250 DWC.
5. Add JPEG CODEC node to S5Pv210.
6. Add opp-suspend to devfreq OPPs on Exynos4 boards to fix resuming
   from suspend to RAM.
7. Remove eDP from Arndale board as it does not work and breaks also
   DSI.

* tag 'samsung-dt-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: remove display-port node from Arndale
  ARM: dts: exynos: Add opp-suspend to DMC and leftbus devfreq OPPs on Exynos4
  ARM: dts: s5pv210: Add s5p-jpeg codec node.
  ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module
  ARM: dts: exynos: Add all CPUs in cooling maps
  ARM: dts: exynos: Clarify comment explaining purpose of Odroid XU3 DTSI
  ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Update maximum frequency for eMMC to 200MHz on Odroid XU3/XU4
  ARM: dts: exynos: Update maximum frequency for SD card to 200MHz on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Fix LDO13 min values on Odroid XU3/XU4/HC1
  ARM: dts: exynos: Add UHS-I bus speed support to Odroid XU3/XU4/HC1
  ARM: dts: exynos: Add missing clocks to RTC node for Arndale board
  ARM: dts: exynos: Add compatible for s5m8767 clocks node on Itop Core
  ARM: dts: exynos: Add compatible for s2mps11 clocks node on Exynos542x

Signed-off-by: Olof Johansson <olof@lixom.net>
 2018-12-12 12:52:20 -08:00