Pull ARM cpufreq updates for v5.13 from Viresh Kumar:
"- Fix typos in s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from
1000 MHz (Pali Rohár and Marek Behún).
- cpufreq-dt: Return -EPROBE_DEFER on failure to add table (Quanyang
Wang).
- Minor cleanup in cppc driver (Tom Saeger).
- Add frequency invariance support for CPPC driver and generalize
freq invariance support arch-topology driver (Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpufreq: dt: dev_pm_opp_of_cpumask_add_table() may return -EPROBE_DEFER
cpufreq: cppc: simplify default delay_us setting
cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c
cpufreq: CPPC: Add support for frequency invariance
arch_topology: Export arch_freq_scale and helpers
arch_topology: Allow multiple entities to provide sched_freq_tick() callback
arch_topology: Rename freq_scale as arch_freq_scale
Kernel mode NEON can be used in task or softirq context, but only in
a non-nesting manner, i.e., softirq context is only permitted if the
interrupt was not taken at a point where the kernel was using the NEON
in task context.
This means all users of kernel mode NEON have to be aware of this
limitation, and either need to provide scalar fallbacks that may be much
slower (up to 20x for AES instructions) and potentially less safe, or
use an asynchronous interface that defers processing to a later time
when the NEON is guaranteed to be available.
Given that grabbing and releasing the NEON is cheap, we can relax this
restriction, by increasing the granularity of kernel mode NEON code, and
always disabling softirq processing while the NEON is being used in task
context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210302090118.30666-4-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The AArch64 asm syntax has this slightly tedious property that the names
used in mnemonics to refer to registers depend on whether the opcode in
question targets the entire 64-bits (xN), or only the least significant
8, 16 or 32 bits (wN). When writing parameterized code such as macros,
this can be annoying, as macro arguments don't lend themselves to
indexed lookups, and so generating a reference to wN in a macro that
receives xN as an argument is problematic.
For instance, an upcoming patch that modifies the implementation of the
cond_yield macro to be able to refer to 32-bit registers would need to
modify invocations such as
cond_yield 3f, x8
to
cond_yield 3f, 8
so that the second argument can be token pasted after x or w to emit the
correct register reference. Unfortunately, this interferes with the self
documenting nature of the first example, where the second argument is
obviously a register, whereas in the second example, one would need to
go and look at the code to find out what '8' means.
So let's fix this by defining wxN aliases for all xN registers, which
resolve to the 32-bit alias of each respective 64-bit register. This
allows the macro implementation to paste the xN reference after a w to
obtain the correct register name.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210302090118.30666-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The users of the conditional NEON yield macros have all been switched to
the simplified cond_yield macro, and so the NEON specific ones can be
removed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210302090118.30666-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This change adds KASAN-KUnit tests support for the async HW_TAGS mode.
In async mode, tag fault aren't being generated synchronously when a
bad access happens, but are instead explicitly checked for by the kernel.
As each KASAN-KUnit test expect a fault to happen before the test is over,
check for faults as a part of the test handler.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-10-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When MTE async mode is enabled TFSR_EL1 contains the accumulative
asynchronous tag check faults for EL1 and EL0.
During the suspend/resume operations the firmware might perform some
operations that could change the state of the register resulting in
a spurious tag check fault report.
Report asynchronous tag faults before suspend and clear the TFSR_EL1
register after resume to prevent this to happen.
Cc: Will Deacon <will@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-9-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
MTE provides a mode that asynchronously updates the TFSR_EL1 register
when a tag check exception is detected.
To take advantage of this mode the kernel has to verify the status of
the register at:
1. Context switching
2. Return to user/EL0 (Not required in entry from EL0 since the kernel
did not run)
3. Kernel entry from EL1
4. Kernel exit to EL1
If the register is non-zero a trace is reported.
Add the required features for EL1 detection and reporting.
Note: ITFSB bit is set in the SCTLR_EL1 register hence it guaranties that
the indirect writes to TFSR_EL1 are synchronized at exception entry to
EL1. On the context switch path the synchronization is guarantied by the
dsb() in __switch_to().
The dsb(nsh) in mte_check_tfsr_exit() is provisional pending
confirmation by the architects.
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-8-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
load_unaligned_zeropad() and __get/put_kernel_nofault() functions can
read past some buffer limits which may include some MTE granule with a
different tag.
When MTE async mode is enabled, the load operation crosses the boundaries
and the next granule has a different tag the PE sets the TFSR_EL1.TF1 bit
as if an asynchronous tag fault is happened.
Enable Tag Check Override (TCO) in these functions before the load and
disable it afterwards to prevent this to happen.
Note: The same condition can be hit in MTE sync mode but we deal with it
through the exception handling.
In the current implementation, mte_async_mode flag is set only at boot
time but in future kasan might acquire some runtime features that
that change the mode dynamically, hence we disable it when sync mode is
selected for future proof.
Cc: Will Deacon <will@kernel.org>
Reported-by: Branislav Rankov <Branislav.Rankov@arm.com>
Tested-by: Branislav Rankov <Branislav.Rankov@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-6-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arch_enable_tagging() was left in memory.h after the introduction of
async mode to not break the bysectability of the KASAN KUNIT tests.
Remove the function now that KASAN has been fully converted.
Cc: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-4-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
MTE provides an asynchronous mode for detecting tag exceptions. In
particular instead of triggering a fault the arm64 core updates a
register which is checked by the kernel after the asynchronous tag
check fault has occurred.
Add support for MTE asynchronous mode.
The exception handling mechanism will be added with a future patch.
Note: KASAN HW activates async mode via kasan.mode kernel parameter.
The default mode is set to synchronous.
The code that verifies the status of TFSR_EL1 will be added with a
future patch.
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-2-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
KVM sets up MDCR_EL2 to trap accesses to the SPE buffer and sampling
control registers and it relies on the fact that KVM injects an undefined
exception for unknown registers. This mechanism of injecting undefined
exceptions also prints a warning message for the host kernel; for example,
when a guest tries to access PMSIDR_EL1:
[ 2.691830] kvm [142]: Unsupported guest sys_reg access at: 80009e78 [800003c5]
[ 2.691830] { Op0( 3), Op1( 0), CRn( 9), CRm( 9), Op2( 7), func_read },
This is unnecessary, because KVM has explicitly configured trapping of
those registers and is well aware of their existence. Prevent the warning
by adding the SPE registers to the list of registers that KVM emulates.
The access function will inject the undefined exception.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210409152154.198566-2-alexandru.elisei@arm.com
Disable CFI checking for functions that switch to linear mapping and
make an indirect call to a physical address, since the compiler only
understands virtual addresses and the CFI check for such indirect calls
would always fail.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-15-samitolvanen@google.com
With CONFIG_CFI_CLANG, the compiler replaces function address
references with the address of the function's CFI jump table
entry. This means that __pa_symbol(function) returns the physical
address of the jump table entry, which can lead to address space
confusion as the jump table points to the function's virtual
address. Therefore, use the function_nocfi() macro to ensure we are
always taking the address of the actual function instead.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-14-samitolvanen@google.com
With CONFIG_CFI_CLANG, the compiler replaces function addresses in
instrumented C code with jump table addresses. This change implements
the function_nocfi() macro, which returns the actual function address
instead.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-13-samitolvanen@google.com
Some CPUs are broken enough that some overrides need to be rejected
at the earliest opportunity. In some cases, that's right at cpu
feature override time.
Provide the necessary infrastructure to filter out overrides,
and to report such filtered out overrides to the core cpufeature code.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210408131010.1109027-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 FEAT_FGT extension introduces a set of traps to EL2 for accesses
to small sets of registers and instructions from EL1 and EL0. Currently
Linux makes no use of this feature, ensure that it is not active at boot by
disabling the traps during EL2 setup.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210401180942.35815-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mte_assign_mem_tag_range() was added in commit 85f49cae4d
("arm64: mte: add in-kernel MTE helpers") in 5.11 but moved out of
mte.S by commit 2cb3427642 ("arm64: kasan: simplify and inline
MTE functions") in 5.12 and renamed to mte_set_mem_tag_range().
2cb3427642 did not delete the old function prototypes in mte.h.
Remove the unused prototype from mte.h.
Cc: Will Deacon <will@kernel.org>
Reported-by: Derrick McKee <derrick.mckee@gmail.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210407133817.23053-1-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
They are not needed after booting, so mark them as __init to move them
to the .init section.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20210330135449.4dcffd7f@xhacker.debian
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we enable SVE usage in userspace after taking a SVE access trap we
need to ensure that the portions of the register state that are not
shared with the FPSIMD registers are zeroed. Currently we do this by
forcing the FPSIMD registers to be saved to the task struct and converting
them there. This is wasteful in the common case where the task state is
loaded into the registers and we will immediately return to userspace
since we can initialise the SVE state directly in registers instead of
accessing multiple copies of the register state in memory.
Instead in that common case do the conversion in the registers and
update the task metadata so that we can return to userspace without
spilling the register state to memory unless there is some other reason
to do so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210312190313.24598-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
These definitions are in arm-gic-v3.h for historical reasons which no
longer apply. Move them to sysreg.h so the AIC driver can use them, as
it needs to peek into vGIC registers to deal with the GIC maintentance
interrupt.
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Now that we have ioremap_np(), we can make pci_remap_cfgspace() default
to it, falling back to ioremap() on platforms where it is not available.
Remove the arm64 implementation, since that is now redundant. Future
cleanups should be able to do the same for other arches, and eventually
make the generic pci_remap_cfgspace() unconditional.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is used on Apple ARM platforms, which require most MMIO
(except PCI devices) to be mapped as nGnRnE.
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
The implementor will be used to condition the FIQ support quirk.
The specific CPU types are not used at the moment, but let's add them
for documentation purposes.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
When a VCPU is created, the kvm_vcpu struct is initialized to zero in
kvm_vm_ioctl_create_vcpu(). On VHE systems, the first time
vcpu.arch.mdcr_el2 is loaded on hardware is in vcpu_load(), before it is
set to a sensible value in kvm_arm_setup_debug() later in the run loop. The
result is that KVM executes for a short time with MDCR_EL2 set to zero.
This has several unintended consequences:
* Setting MDCR_EL2.HPMN to 0 is constrained unpredictable according to ARM
DDI 0487G.a, page D13-3820. The behavior specified by the architecture
in this case is for the PE to behave as if MDCR_EL2.HPMN is set to a
value less than or equal to PMCR_EL0.N, which means that an unknown
number of counters are now disabled by MDCR_EL2.HPME, which is zero.
* The host configuration for the other debug features controlled by
MDCR_EL2 is temporarily lost. This has been harmless so far, as Linux
doesn't use the other fields, but that might change in the future.
Let's avoid both issues by initializing the VCPU's mdcr_el2 field in
kvm_vcpu_vcpu_first_run_init(), thus making sure that the MDCR_EL2 register
has a consistent value after each vcpu_load().
Fixes: d5a21bcc29 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210407144857.199746-3-alexandru.elisei@arm.com
We needn't expose the function as it's only used by mmu.c since it
was introduced by commit c64735554c ("KVM: arm: Add initial dirty
page locking support").
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210316041126.81860-2-gshan@redhat.com
For a nvhe host, the EL2 must allow the EL1&0 translation
regime for TraceBuffer (MDCR_EL2.E2TB == 0b11). This must
be saved/restored over a trip to the guest. Also, before
entering the guest, we must flush any trace data if the
TRBE was enabled. And we must prohibit the generation
of trace while we are in EL1 by clearing the TRFCR_EL1.
For vhe, the EL2 must prevent the EL1 access to the Trace
Buffer.
The MDCR_EL2 bit definitions for TRBE are available here :
https://developer.arm.com/documentation/ddi0601/2020-12/AArch64-Registers/
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405164307.1720226-8-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
At the moment, we check the availability of SPE on the given
CPU (i.e, SPE is implemented and is allowed at the host) during
every guest entry. This can be optimized a bit by moving the
check to vcpu_load time and recording the availability of the
feature on the current CPU via a new flag. This will also be useful
for adding the TRBE support.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexandru Elisei <Alexandru.Elisei@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405164307.1720226-7-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
tsb csync synchronizes the trace operation of instructions.
The instruction is a nop when FEAT_TRF is not implemented.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210405164307.1720226-4-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
To aid with debugging, add details of the source of a panic from nVHE
hyp. This is done by having nVHE hyp exit to nvhe_hyp_panic_handler()
rather than directly to panic(). The handler will then add the extra
details for debugging before panicking the kernel.
If the panic was due to a BUG(), look up the metadata to log the file
and line, if available, otherwise log an address that can be looked up
in vmlinux. The hyp offset is also logged to allow other hyp VAs to be
converted, similar to how the kernel offset is logged during a panic.
__hyp_panic_string is now inlined since it no longer needs to be
referenced as a symbol and the message is free to diverge between VHE
and nVHE.
The following is an example of the logs generated by a BUG in nVHE hyp.
[ 46.754840] kvm [307]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/switch.c:242!
[ 46.755357] kvm [307]: Hyp Offset: 0xfffea6c58e1e0000
[ 46.755824] Kernel panic - not syncing: HYP panic:
[ 46.755824] PS:400003c9 PC:0000d93a82c705ac ESR:f2000800
[ 46.755824] FAR:0000000080080000 HPFAR:0000000000800800 PAR:0000000000000000
[ 46.755824] VCPU:0000d93a880d0000
[ 46.756960] CPU: 3 PID: 307 Comm: kvm-vcpu-0 Not tainted 5.12.0-rc3-00005-gc572b99cf65b-dirty #133
[ 46.757459] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[ 46.758366] Call trace:
[ 46.758601] dump_backtrace+0x0/0x1b0
[ 46.758856] show_stack+0x18/0x70
[ 46.759057] dump_stack+0xd0/0x12c
[ 46.759236] panic+0x16c/0x334
[ 46.759426] arm64_kernel_unmapped_at_el0+0x0/0x30
[ 46.759661] kvm_arch_vcpu_ioctl_run+0x134/0x750
[ 46.759936] kvm_vcpu_ioctl+0x2f0/0x970
[ 46.760156] __arm64_sys_ioctl+0xa8/0xec
[ 46.760379] el0_svc_common.constprop.0+0x60/0x120
[ 46.760627] do_el0_svc+0x24/0x90
[ 46.760766] el0_svc+0x2c/0x54
[ 46.760915] el0_sync_handler+0x1a4/0x1b0
[ 46.761146] el0_sync+0x170/0x180
[ 46.761889] SMP: stopping secondary CPUs
[ 46.762786] Kernel Offset: 0x3e1cd2820000 from 0xffff800010000000
[ 46.763142] PHYS_OFFSET: 0xffffa9f680000000
[ 46.763359] CPU features: 0x00240022,61806008
[ 46.763651] Memory Limit: none
[ 46.813867] ---[ end Kernel panic - not syncing: HYP panic:
[ 46.813867] PS:400003c9 PC:0000d93a82c705ac ESR:f2000800
[ 46.813867] FAR:0000000080080000 HPFAR:0000000000800800 PAR:0000000000000000
[ 46.813867] VCPU:0000d93a880d0000 ]---
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-6-ascull@google.com
hyp_panic() reports the address of the panic by using ELR_EL2, but this
isn't a useful address when hyp_panic() is called directly. Replace such
direct calls with BUG() and BUG_ON() which use BRK to trigger an
exception that then goes to hyp_panic() with the correct address. Also
remove the hyp_panic() declaration from the header file to avoid
accidental misuse.
Signed-off-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-5-ascull@google.com
Compilation fails when KVM is selected and ARM64_SVE isn't.
The root cause is that sve_cond_update_zcr_vq is not defined when
ARM64_SVE is not selected. Fix it by adding an empty definition
when CONFIG_ARM64_SVE=n.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
[maz: simplified commit message, fleshed out dummy #define]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1617183879-48748-1-git-send-email-tanxiaofei@huawei.com
Although the SMCCC specification provides some limited functionality for
describing the presence of hypervisor and firmware services, this is
generally applicable only to functions designated as "Arm Architecture
Service Functions" and no portable discovery mechanism is provided for
standard hypervisor services, despite having a designated range of
function identifiers reserved by the specification.
In an attempt to avoid the need for additional firmware changes every
time a new function is added, introduce a UID to identify the service
provider as being compatible with KVM. Once this has been established,
additional services can be discovered via a feature bitmap.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
[maz: move code to its own file, plug it into PSCI]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-2-jianyong.wu@arm.com
In commit eb631bb5bf
("arm64: Support arch_irq_work_raise() via self IPIs") a new
function "arch_irq_work_raise" was added without a prototype.
In commit d914d4d497
("arm64: Implement panic_smp_self_stop()") a new
function "panic_smp_self_stop" was added without a prototype.
We get the following warnings on W=1:
arch/arm64/kernel/smp.c:842:6: warning: no previous prototype
for ‘arch_irq_work_raise’ [-Wmissing-prototypes]
arch/arm64/kernel/smp.c:862:6: warning: no previous prototype
for ‘panic_smp_self_stop’ [-Wmissing-prototypes]
Fix the warnings by:
1. Adding the prototype for 'arch_irq_work_raise' in irq_work.h
2. Adding the prototype for 'panic_smp_self_stop' in smp.h
Signed-off-by: Chen Lifu <chenlifu@huawei.com>
Link: https://lore.kernel.org/r/20210329034343.183974-1-chenlifu@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently start_backtrace() is a static inline function in the header.
Since it really shouldn't be sufficiently performance critical that we
actually need to have it inlined move it into a C file, this will save
anyone else scratching their head about why it is defined in the header.
As far as I can see it's only there because it was factored out of the
various callers.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210319174022.33051-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enhanced Privileged Access Never (EPAN) allows Privileged Access Never
to be used with Execute-only mappings.
Absence of such support was a reason for 24cecc3774 ("arm64: Revert
support for execute-only user mappings"). Thus now it can be revisited
and re-enabled.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210312173811.58284-2-vladimir.murzin@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmBccr0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG6UCACDbz3BO/y40wRhWwMhvDhyFDqtlTlVEQlb
hxnJzksXOlbqHB1J7yamzXxS1UlCBlhvjrFNTe1s5LJIfB0niMskYLe2p0dJ/voi
WyysvaiK7/1bZV/RRdF7r+hFtMPHBEAKfgs+ZxFN9mnMcserV8PWqiD5ookCqavE
xatE/fEgVujiISl/BOkP1pnmWnPM4f9BIMS5DgaZJsNDYtxeu9a3RGnfu9vNHaP2
gxq5+E3BjZfh1z0++HP6nTuDbdDaxEz12gyoZ+4wejXVhwj1g7NySJNa8RmJG9pU
gX+jE6HOgeCFIEe9Gx+I2QtAaFia96HVnAAHagGBHB1vfV7GTRxN
=tzbO
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Minor fixes all over, ranging from typos to tests to errata
workarounds:
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: disable CNP on Carmel
arm64/process.c: fix Wmissing-prototypes build warnings
kselftest/arm64: sve: Do not use non-canonical FFR register value
arm64: mm: correct the inside linear map range during hotplug check
arm64: kdump: update ppos when reading elfcorehdr
arm64: cpuinfo: Fix a typo
Documentation: arm64/acpi : clarify arm64 support of IBFT
arm64: stacktrace: don't trace arch_stack_walk()
arm64: csum: cast to the proper type
The spec_bar() macro was introduced in
commit bd4fb6d270 ("arm64: Add support for SB barrier and patch in over DSB; ISB sequences")
as a way for C to insert a speculation barrier and was then
used in one single place: set_fs().
Later on
commit 3d2403fd10 ("arm64: uaccess: remove set_fs()")
deleted set_fs() altogether and as noted in the commit
on the new path the regular sb() assembly macro will
be used.
Delete the remnant.
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210325141304.1607595-1-linus.walleij@linaro.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that the read_ctr macro has been specialised for nVHE,
the whole CPU_FTR_REG_HYP_COPY infrastrcture looks completely
overengineered.
Simplify it by populating the two u64 quantities (MMFR0 and 1)
that the hypervisor need.
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In protected mode, late CPUs are not allowed to boot (enforced by
the PSCI relay). We can thus specialise the read_ctr macro to
always return a pre-computed, sanitised value. Special care is
taken to prevent the use of this custome version outside of
the protected mode.
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
On NVIDIA Carmel cores, CNP behaves differently than it does on standard
ARM cores. On Carmel, if two cores have CNP enabled and share an L2 TLB
entry created by core0 for a specific ASID, a non-shareable TLBI from
core1 may still see the shared entry. On standard ARM cores, that TLBI
will invalidate the shared entry as well.
This causes issues with patchsets that attempt to do local TLBIs based
on cpumasks instead of broadcast TLBIs. Avoid these issues by disabling
CNP support for NVIDIA Carmel cores.
Signed-off-by: Rich Wiley <rwiley@nvidia.com>
Link: https://lore.kernel.org/r/20210324002809.30271-1-rwiley@nvidia.com
[will: Fix pre-existing whitespace issue]
Signed-off-by: Will Deacon <will@kernel.org>
On contemporary platforms we don't use FIQ, and treat any stray FIQ as a
fatal event. However, some platforms have an interrupt controller wired
to FIQ, and need to handle FIQ as part of regular operation.
So that we can support both cases dynamically, this patch updates the
FIQ exception handling code to operate the same way as the IRQ handling
code, with its own handle_arch_fiq handler. Where a root FIQ handler is
not registered, an unexpected FIQ exception will trigger the default FIQ
handler, which will panic() as today. Where a root FIQ handler is
registered, handling of the FIQ is deferred to that handler.
As el0_fiq_invalid_compat is supplanted by el0_fiq, the former is
removed. For !CONFIG_COMPAT builds we never expect to take an exception
from AArch32 EL0, so we keep the common el0_fiq_invalid handler.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hector Martin <marcan@marcan.st>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210315115629.57191-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Apple SoCs (A11 and newer) have some interrupt sources hardwired to the
FIQ line. We implement support for this by simply treating IRQs and FIQs
the same way in the interrupt vectors.
To support these systems, the FIQ mask bit needs to be kept in sync with
the IRQ mask bit, so both kinds of exceptions are masked together. No
other platforms should be delivering FIQ exceptions right now, and we
already unmask FIQ in normal process context, so this should not have an
effect on other systems - if spurious FIQs were arriving, they would
already panic the kernel.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hector Martin <marcan@marcan.st>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210315115629.57191-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In subsequent patches we want to allow irqchip drivers to register as
FIQ handlers, with a set_handle_fiq() function. To keep the IRQ/FIQ
paths similar, we want arm64 to provide both set_handle_irq() and
set_handle_fiq(), rather than using GENERIC_IRQ_MULTI_HANDLER for the
former.
This patch adds an arm64-specific implementation of set_handle_irq().
There should be no functional change as a result of this patch.
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Mark: use a single handler pointer]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hector Martin <marcan@marcan.st>
Cc: James Morse <james.morse@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210315115629.57191-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Disable guest access to the Trace Filter control registers.
We do not advertise the Trace filter feature to the guest
(ID_AA64DFR0_EL1: TRACE_FILT is cleared) already, but the guest
can still access the TRFCR_EL1 unless we trap it.
This will also make sure that the guest cannot fiddle with
the filtering controls set by a nvhe host.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210323120647.454211-3-suzuki.poulose@arm.com
We can avoid the expensive ISB instruction after reading the counter in
the vDSO gettime functions by creating a fake address hazard against a
dummy stack read, just like we do inside the kernel.
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210318170738.7756-5-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As the kernel and user space page tables are strictly mutually exclusive
when it comes to executable permissions, we can set the UXN table attribute
on all table entries that are created while creating kernel mappings in the
swapper page tables, and the PXN table attribute on all table entries that
are created while creating user space mappings in user space page tables.
While at it, get rid of a redundant comment.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210310104942.174584-4-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The way the arm64 kernel virtual address space is constructed guarantees
that swapper PGD entries are never shared between the linear region on
the one hand, and the vmalloc region on the other, which is where all
kernel text, module text and BPF text mappings reside.
This means that mappings in the linear region (which never require
executable permissions) never share any table entries at any level with
mappings that do require executable permissions, and so we can set the
table-level PXN attributes for all table entries that are created while
setting up mappings in the linear region. Since swapper's PGD level page
table is mapped r/o itself, this adds another layer of robustness to the
way the kernel manages its own page tables. While at it, set the UXN
attribute as well for all kernel mappings created at boot.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210310104942.174584-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Even though level 0, 1 and 2 descriptors share the same attribute
encodings, let's be a bit more consistent about using the right one at
the right level. So add new macros for level 0/P4D definitions, and
clean up some inconsistencies involving these macros.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210310104942.174584-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When KVM runs in nVHE protected mode, use the host stage 2 to unmap the
hypervisor sections by marking them as owned by the hypervisor itself.
The long-term goal is to ensure the EL2 code can remain robust
regardless of the host's state, so this starts by making sure the host
cannot e.g. write to the .hyp sections directly.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-39-qperret@google.com
When KVM runs in protected nVHE mode, make use of a stage 2 page-table
to give the hypervisor some control over the host memory accesses. The
host stage 2 is created lazily using large block mappings if possible,
and will default to page mappings in absence of a better solution.
>From this point on, memory accesses from the host to protected memory
regions (e.g. not 'owned' by the host) are fatal and lead to hyp_panic().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-36-qperret@google.com
We will need to read sanitized values of mmfr{0,1}_el1 at EL2 soon, so
add them to the list of copied variables.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-35-qperret@google.com
Introduce a new stage 2 configuration flag to specify that all mappings
in a given page-table will be identity-mapped, as will be the case for
the host. This allows to introduce sanity checks in the map path and to
avoid programming errors.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-34-qperret@google.com
In order to further configure stage 2 page-tables, pass flags to the
init function using a new enum.
The first of these flags allows to disable FWB even if the hardware
supports it as we will need to do so for the host stage 2.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-33-qperret@google.com
Since the host stage 2 will be identity mapped, and since it will own
most of memory, it would preferable for performance to try and use large
block mappings whenever that is possible. To ease this, introduce a new
helper in the KVM page-table code which allows to search for large
ranges of available IPA space. This will be used in the host memory
abort path to greedily idmap large portion of the PA space.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-32-qperret@google.com
As the host stage 2 will be identity mapped, all the .hyp memory regions
and/or memory pages donated to protected guestis will have to marked
invalid in the host stage 2 page-table. At the same time, the hypervisor
will need a way to track the ownership of each physical page to ensure
memory sharing or donation between entities (host, guests, hypervisor) is
legal.
In order to enable this tracking at EL2, let's use the host stage 2
page-table itself. The idea is to use the top bits of invalid mappings
to store the unique identifier of the page owner. The page-table owner
(the host) gets identifier 0 such that, at boot time, it owns the entire
IPA space as the pgd starts zeroed.
Provide kvm_pgtable_stage2_set_owner() which allows to modify the
ownership of pages in the host stage 2. It re-uses most of the map()
logic, but ends up creating invalid mappings instead. This impacts
how we do refcount as we now need to count invalid mappings when they
are used for ownership tracking.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-30-qperret@google.com
The current stage2 page-table allocator uses a memcache to get
pre-allocated pages when it needs any. To allow re-using this code at
EL2 which uses a concept of memory pools, make the memcache argument of
kvm_pgtable_stage2_map() anonymous, and let the mm_ops zalloc_page()
callbacks use it the way they need to.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-26-qperret@google.com
Refactor __load_guest_stage2() to introduce __load_stage2() which will
be re-used when loading the host stage 2.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-24-qperret@google.com
In order to re-use some of the stage 2 setup code at EL2, factor parts
of kvm_arm_setup_stage2() out into separate functions.
No functional change intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-23-qperret@google.com
Move the registers relevant to host stage 2 enablement to
kvm_nvhe_init_params to prepare the ground for enabling it in later
patches.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-22-qperret@google.com
In order to make use of the stage 2 pgtable code for the host stage 2,
change kvm_s2_mmu to use a kvm_arch pointer in lieu of the kvm pointer,
as the host will have the former but not the latter.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-21-qperret@google.com
In order to make use of the stage 2 pgtable code for the host stage 2,
use struct kvm_arch in lieu of struct kvm as the host will have the
former but not the latter.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-20-qperret@google.com
Previous commits have introduced infrastructure to enable the EL2 code
to manage its own stage 1 mappings. However, this was preliminary work,
and none of it is currently in use.
Put all of this together by elevating the mapping creation at EL2 when
memory protection is enabled. In this case, the host kernel running
at EL1 still creates _temporary_ EL2 mappings, only used while
initializing the hypervisor, but frees them right after.
As such, all calls to create_hyp_mappings() after kvm init has finished
turn into hypercalls, as the host now has no 'legal' way to modify the
hypevisor page tables directly.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-19-qperret@google.com
When memory protection is enabled, the EL2 code needs the ability to
create and manage its own page-table. To do so, introduce a new set of
hypercalls to bootstrap a memory management system at EL2.
This leads to the following boot flow in nVHE Protected mode:
1. the host allocates memory for the hypervisor very early on, using
the memblock API;
2. the host creates a set of stage 1 page-table for EL2, installs the
EL2 vectors, and issues the __pkvm_init hypercall;
3. during __pkvm_init, the hypervisor re-creates its stage 1 page-table
and stores it in the memory pool provided by the host;
4. the hypervisor then extends its stage 1 mappings to include a
vmemmap in the EL2 VA space, hence allowing to use the buddy
allocator introduced in a previous patch;
5. the hypervisor jumps back in the idmap page, switches from the
host-provided page-table to the new one, and wraps up its
initialization by enabling the new allocator, before returning to
the host.
6. the host can free the now unused page-table created for EL2, and
will now need to issue hypercalls to make changes to the EL2 stage 1
mappings instead of modifying them directly.
Note that for the sake of simplifying the review, this patch focuses on
the hypervisor side of things. In other words, this only implements the
new hypercalls, but does not make use of them from the host yet. The
host-side changes will follow in a subsequent patch.
Credits to Will for __pkvm_init_switch_pgd.
Acked-by: Will Deacon <will@kernel.org>
Co-authored-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-18-qperret@google.com
We will soon need to turn the EL2 stage 1 MMU on and off in nVHE
protected mode, so refactor the set_sctlr_el1 macro to make it usable
for that purpose.
Acked-by: Will Deacon <will@kernel.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-17-qperret@google.com
In order to re-map the guest vectors at EL2 when pKVM is enabled,
refactor __kvm_vector_slot2idx() and kvm_init_vector_slot() to move all
the address calculation logic in a static inline function.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-16-qperret@google.com
We will need to do cache maintenance at EL2 soon, so compile a copy of
__flush_dcache_area at EL2, and provide a copy of arm64_ftr_reg_ctrel0
as it is needed by the read_ctr macro.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-15-qperret@google.com
Introduce the infrastructure in KVM enabling to copy CPU feature
registers into EL2-owned data-structures, to allow reading sanitised
values directly at EL2 in nVHE.
Given that only a subset of these features are being read by the
hypervisor, the ones that need to be copied are to be listed under
<asm/kvm_cpufeature.h> together with the name of the nVHE variable that
will hold the copy. This introduces only the infrastructure enabling
this copy. The first users will follow shortly.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-14-qperret@google.com
In order to allow the usage of code shared by the host and the hyp in
static inline library functions, allow the usage of kvm_nvhe_sym() at
EL2 by defaulting to the raw symbol name.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-10-qperret@google.com
kvm_call_hyp() has some logic to issue a function call or a hypercall
depending on the EL at which the kernel is running. However, all the
code compiled under __KVM_NVHE_HYPERVISOR__ is guaranteed to only run
at EL2 which allows us to simplify.
Add ifdefery to kvm_host.h to simplify kvm_call_hyp() in .hyp.text.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-9-qperret@google.com
Currently, the hyp code cannot make full use of a bss, as the kernel
section is mapped read-only.
While this mapping could simply be changed to read-write, it would
intermingle even more the hyp and kernel state than they currently are.
Instead, introduce a __hyp_bss section, that uses reserved pages, and
create the appropriate RW hyp mappings during KVM init.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-8-qperret@google.com
In preparation for enabling the creation of page-tables at EL2, factor
all memory allocation out of the page-table code, hence making it
re-usable with any compatible memory allocator.
No functional changes intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-7-qperret@google.com
Pull clear_page(), copy_page(), memcpy() and memset() into the nVHE hyp
code and ensure that we always execute the '__pi_' entry point on the
offchance that it changes in future.
[ qperret: Commit title nits and added linker script alias ]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-3-qperret@google.com
As the EL2 nVHE object is nicely split into sections and that
we already use differenciating permissions for data and code,
we can enable SCTLR_EL2.WXN so that we don't have to worry
about misconfiguration of the page tables.
Flip the WXN bit and get the ball running!
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Only the nVHE EL2 code is using this define, so let's make it
plain that it is EL2 only, and refactor it to contain all the
bits we need when configuring the EL2 MMU, and only those.
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that KVM is equipped to deal with SVE on nVHE, remove the code
preventing it from being used as well as the bits of documentation
that were mentioning the incompatibility.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Daniel Kiss <daniel.kiss@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to keep the code readable, move the host-save/guest-restore
sequences in their own functions, with the following changes:
- the hypervisor ZCR is now set from C code
- ZCR_EL2 is always used as the EL2 accessor
This results in some minor assembler macro rework.
No functional change intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
A common pattern is to conditionally update ZCR_ELx in order
to avoid the "self-synchronizing" effect that writing to this
register has.
Let's provide an accessor that does exactly this.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The KVM code contains a number of "sve_vq_from_vl(vcpu->arch.sve_max_vl)"
instances, and we are about to add more.
Introduce vcpu_sve_vq() as a shorthand for this expression.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The vcpu_sve_pffr() returns a pointer, which can be an interesting
thing to do on nVHE. Wrap the pointer with kern_hyp_va(), and
take this opportunity to remove the unnecessary casts (sve_state
being a void *).
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
as we are about to change the way KVM deals with SVE, provide
KVM with its own save/restore SVE primitives.
No functional change intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The last line of ip_fast_csum() calls csum_fold(), forcing the
type of the argument passed to be u32. But csum_fold() takes a
__wsum argument (which is __u32 __bitwise for arm64). As long
as we're forcing the cast, cast it to the right type.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210315012650.1221328-1-elder@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmBLsyoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMpYgf/Zu1Byif+XZVdwm52wJN38ppUUVmn
4u8HvQ8Ht+P0cGg1IaNx9D5QXGRgdn72qEpWUF5aH03ahTANAuf6zXw+evKmiub/
RtJfxZWEcWeLdugLVHUSrR4MOox7uvFmCdcdht4sEPdjFdH/9JeceC3A1pZ/DYTR
+eS+E3dMWQjXnd2Omo/5f5H1LTZjNLEditnkcHT5unwKKukc008V/avgs8xOAKJB
xf3oqJF960IO+NYf8rRQb8WtyGeo0grrWjgeqvZ37gwGUaFB9ldVxchsVLsL66OR
bJRIoSiTgL+TUYSMQ5mKG4tmmBnPHUHfgfNoOXlWMoJHIjFeQ9oM6eTHhA==
=QTFW
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"More fixes for ARM and x86"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: LAPIC: Advancing the timer expiration on guest initiated write
KVM: x86/mmu: Skip !MMU-present SPTEs when removing SP in exclusive mode
KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged
kvm: x86: annotate RCU pointers
KVM: arm64: Fix exclusive limit for IPA size
KVM: arm64: Reject VM creation when the default IPA size is unsupported
KVM: arm64: Ensure I-cache isolation between vcpus of a same VM
KVM: arm64: Don't use cbz/adr with external symbols
KVM: arm64: Fix range alignment when walking page tables
KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility
KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config()
KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is available
KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static key
KVM: arm64: Fix nVHE hyp panic host context restore
KVM: arm64: Avoid corrupting vCPU context register in guest exit
KVM: arm64: nvhe: Save the SPE context early
kvm: x86: use NULL instead of using plain integer as pointer
KVM: SVM: Connect 'npt' module param to KVM's internal 'npt_enabled'
KVM: x86: Ensure deadline timer has truly expired before posting its IRQ
The time pvops functions are the only ones left which might be
used in 32-bit mode and which return a 64-bit value.
Switch them to use the static_call() mechanism instead of pvops, as
this allows quite some simplification of the pvops implementation.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311142319.4723-5-jgross@suse.com
These routines lost all existing users during the latest merge window so
we can remove them. This avoids the need to fix them in the context of
fixing a regression related to the ID map on 52-bit VA kernels.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210310171515.416643-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
