Commit Graph

11 Commits

Author SHA1 Message Date
Nicholas Piggin
50e51c13b3 powerpc/64: Add macros for annotating the destination of rfid/hrfid
The rfid/hrfid ((Hypervisor) Return From Interrupt) instruction is
used for switching from the kernel to userspace, and from the
hypervisor to the guest kernel. However it can and is also used for
other transitions, eg. from real mode kernel code to virtual mode
kernel code, and it's not always clear from the code what the
destination context is.

To make it clearer when reading the code, add macros which encode the
expected destination context.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-10 03:07:30 +11:00
Kevin Hao
e1f580e8ce powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry
In order to workaround Erratum A-008139, we have to invalidate the
tlb entry with tlbilx before overwriting. Due to the performance
consideration, we don't add any memory barrier when acquire/release
the tcd lock. This means the two load instructions for esel_next do
have the possibility to return different value. This is definitely
not acceptable due to the Erratum A-008139. We have two options to
fix this issue:
  a) Add memory barrier when acquire/release tcd lock to order the
     load/store to esel_next.
  b) Just make sure to invalidate and write to the same tlb entry and
     tolerate the race that we may get the wrong value and overwrite
     the tlb entry just updated by the other thread.

We observe better performance using option b. So reserve an additional
register to save the value of the esel_next.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27 18:14:40 -05:00
Tiejun Chen
1cb6e06492 powerpc/book3e: support CONFIG_RELOCATABLE
book3e is different with book3s since 3s includes the exception
vectors code in head_64.S as it relies on absolute addressing
which is only possible within this compilation unit. So we have
to get that label address with got.

And when boot a relocated kernel, we should reset ipvr properly again
after .relocate.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: cleanup and ifdef removal]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27 18:13:27 -05:00
Anton Blanchard
b1576fec7f powerpc: No need to use dot symbols when branching to a function
binutils is smart enough to know that a branch to a function
descriptor is actually a branch to the functions text address.

Alan tells me that binutils has been doing this for 9 years.

Signed-off-by: Anton Blanchard <anton@samba.org>
2014-04-23 10:05:16 +10:00
Scott Wood
a3dc620743 powerpc/booke64: Use SPRG_TLB_EXFRAME on bolted handlers
While bolted handlers (including e6500) do not need to deal with a TLB
miss recursively causing another TLB miss, nested TLB misses can still
happen with crit/mc/debug exceptions -- so we still need to honor
SPRG_TLB_EXFRAME.

We don't need to spend time modifying it in the TLB miss fastpath,
though -- the special level exception will handle that.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Mihai Caraman <mihai.caraman@freescale.com>
Cc: kvm-ppc@vger.kernel.org
2014-03-19 19:57:15 -05:00
Scott Wood
9d378dfac8 powerpc/booke64: Use SPRG7 for VDSO
Previously SPRG3 was marked for use by both VDSO and critical
interrupts (though critical interrupts were not fully implemented).

In commit 8b64a9dfb0 ("powerpc/booke64:
Use SPRG0/3 scratch for bolted TLB miss & crit int"), Mihai Caraman
made an attempt to resolve this conflict by restoring the VDSO value
early in the critical interrupt, but this has some issues:

 - It's incompatible with EXCEPTION_COMMON which restores r13 from the
   by-then-overwritten scratch (this cost me some debugging time).
 - It forces critical exceptions to be a special case handled
   differently from even machine check and debug level exceptions.
 - It didn't occur to me that it was possible to make this work at all
   (by doing a final "ld r13, PACA_EXCRIT+EX_R13(r13)") until after
   I made (most of) this patch. :-)

It might be worth investigating using a load rather than SPRG on return
from all exceptions (except TLB misses where the scratch never leaves
the SPRG) -- it could save a few cycles.  Until then, let's stick with
SPRG for all exceptions.

Since we cannot use SPRG4-7 for scratch without corrupting the state of
a KVM guest, move VDSO to SPRG7 on book3e.  Since neither SPRG4-7 nor
critical interrupts exist on book3s, SPRG3 is still used for VDSO
there.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Mihai Caraman <mihai.caraman@freescale.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: kvm-ppc@vger.kernel.org
2014-03-19 19:57:14 -05:00
Mihai Caraman
8b64a9dfb0 powerpc/booke64: Use SPRG0/3 scratch for bolted TLB miss & crit int
Embedded.Hypervisor category defines GSPRG0..3 physical registers for guests.
Avoid SPRG4-7 usage as scratch in host exception handlers, otherwise guest
SPRG4-7 registers will be clobbered.
For bolted TLB miss exception handlers, which is the version currently
supported by KVM, use SPRN_SPRG_GEN_SCRATCH aka SPRG0 instead of
SPRN_SPRG_TLB_SCRATCH aka SPRG6. Keep using TLB PACA slots to fit in one
64-byte cache line.
For critical exception handlers use SPRG3 instead of SPRG7. Provide a routine
to store and restore user-visible SPRGs. This will be subsequently used
to restore VDSO information in SPRG3. Add EX_R13 to paca slots to free up
SPRG3 and change the critical exception epilog to use it.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05 15:35:52 +10:00
Mihai Caraman
5473eb1c07 powerpc/booke64: Use GSRR registers in Guest Doorbell interrupts
Guest Doorbell interrupts use guest save and restore registers. Add a new
Guest Doorbell exception type to accommodate GSRR0/1 SPRs usage in exception
prolog and fix the exception handler.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05 15:35:43 +10:00
Scott Wood
f67f4ef5fc powerpc/book3e-64: use a separate TLB handler when linear map is bolted
On MMUs such as FSL where we can guarantee the entire linear mapping is
bolted, we don't need to worry about linear TLB misses.  If on top of
that we do a full table walk, we get rid of all recursive TLB faults, and
can dispense with some state saving.  This gains a few percent on
TLB-miss-heavy workloads, and around 50% on a benchmark that had a high
rate of virtual page table faults under the normal handler.

While touching the EX_TLB layout, remove EX_TLB_MMUCR0, EX_TLB_SRR0, and
EX_TLB_SRR1 as they're not used.

[BenH: Fixed build with 64K pages (wsp config)]

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29 17:47:48 +10:00
Kumar Gala
4b98d9e713 powerpc/book3e-64: Add helper function to setup IVORs
Not all 64-bit Book-3E parts will have fixed IVORs so add a function that
cpusetup code can call to setup the base IVORs (0..15) to match the fixed
offsets.  We need to 'or' part of interrupt_base_book3e into the IVORs
since on parts that have them the IVPR doesn't extend as far down.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:13 +10:00
Benjamin Herrenschmidt
13363ab9b9 powerpc: Add definitions used by exception handling on 64-bit Book3E
This adds various definitions and macros used by the exception and TLB
miss handling on 64-bit BookE

It also adds the definitions of the SPRGs used for various exception types

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:25:07 +10:00