The first time that we allocate from an uninitialized inode allocation
bitmap, if the block allocation bitmap is also uninitalized, we need
to get write access to the block group descriptor before we start
modifying the block group descriptor flags and updating the free block
count, etc. Otherwise, there is the potential of a bad journal
checksum (if journal checksums are enabled), and of the file system
becoming inconsistent if we crash at exactly the wrong time.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
We should decrement free clusters counter when block bitmap is marked
as corrupt and free inodes counter when the allocation bitmap is
marked as corrupt to avoid misunderstanding due to incorrect available
size in statfs result. User can get immediately ENOSPC error from
write begin without reaching for the writepages.
Cc: Darrick J. Wong<darrick.wong@oracle.com>
Reported-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Many of the uses of get_random_bytes() do not actually need
cryptographically secure random numbers. Replace those uses with a
call to prandom_u32(), which is faster and which doesn't consume
entropy from the /dev/random driver.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the group descriptor fails validation, mark the whole blockgroup
corrupt so that the inode/block allocators skip this group. The
previous approach takes the risk of writing to a damaged group
descriptor; hopefully it was never the case that the [ib]bitmap fields
pointed to another valid block and got dirtied, since the memset would
fill the page with 1s.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we detect either a discrepancy between the inode bitmap and the
inode counts or the inode bitmap fails to pass validation checks, mark
the block group corrupt and refuse to allocate or deallocate inodes
from the group.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In no journal mode, if an inode has recently been deleted, we
shouldn't reuse it right away. Otherwise it's possible, after an
unclean shutdown, to hit a situation where a recently deleted inode
gets reused for some other purpose before the inode table block has
been written to disk. However, if the directory entry has been
updated, then the directory entry will be pointing at the old inode
contents.
E2fsck will make sure the file system is consistent after the
unclean shutdown. However, if the recently deleted inode is a
character mode device, or an inode with the immutable bit set, even
after the file system has been fixed up by e2fsck, it can be
possible for a *.pyc file to be pointing at a character mode
device, and when python tries to open the *.pyc file, Hilarity
Ensues. We could change all of userspace to be very suspicious
about stat'ing files before opening them, and clearing the
immutable flag if necessary --- or we can just avoid reusing an
inode number if it has been recently deleted.
Google-Bug-Id: 10017573
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we try to allocate an inode, and there is a race between two
CPU's trying to grab the same inode, _and_ this inode is the last free
inode in the block group, make sure the group number is bumped before
we continue searching the rest of the block groups. Otherwise, we end
up searching the current block group twice, and we end up skipping
searching the last block group. So in the unlikely situation where
almost all of the inodes are allocated, it's possible that we will
return ENOSPC even though there might be free inodes in that last
block group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
As Dave Chinner pointed out at the 2013 LSF/MM workshop, it's
important that metadata I/O requests are marked as such to avoid
priority inversions caused by I/O bandwidth throttling.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Inode allocation transaction is pretty heavy (246 credits with quotas
and extents before previous patch, still around 200 after it). This is
mostly due to credits required for allocation of quota structures
(credits there are heavily overestimated but it's difficult to make
better estimates if we don't want to wire non-trivial assumptions about
quota format into filesystem).
So move quota initialization out of allocation transaction. That way
transaction for quota structure allocation will be started only if we
need to look up quota structure on disk (rare) and furthermore it will
be started for each quota type separately, not for all of them at once.
This reduces maximum transaction size to 34 is most cases and to 73 in
the worst case.
[ Modified by tytso to clean up the cleanup paths for error handling.
Also use a separate call to ext4_std_error() for each failure so it
is easier for someone who is debugging a problem in this function to
determine which function call failed. ]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A user who was using a 8TB+ file system and with a very large flexbg
size (> 65536) could cause the atomic_t used in the struct flex_groups
to overflow. This was detected by PaX security patchset:
http://forums.grsecurity.net/viewtopic.php?f=3&t=3289&p=12551#p12551
This bug was introduced in commit 9f24e4208f, so it's been around
since 2.6.30. :-(
Fix this by using an atomic64_t for struct orlav_stats's
free_clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Some messages printed related to a WARN_ON(1) were printed using
KERN_NOTICE. Use KERN_WARNING or ext4_warning() instead so that
context related to the WARN_ON() is printed at the same printk warning
level (and log files, etc.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_{create,mknod,mkdir,symlink}(), don't start the journal handle
until the inode has been succesfully allocated. In order to do this,
we need to start the handle in the ext4_new_inode(). So create a new
variant of this function, ext4_new_inode_start_handle(), so the handle
can be created at the last possible minute, before we need to modify
the inode allocation bitmap block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.
The recommended way for finding the longer-running handles is:
T=/sys/kernel/debug/tracing
EVENT=$T/events/jbd2/jbd2_handle_stats
echo "interval > 5" > $EVENT/filter
echo 1 > $EVENT/enable
./run-my-fs-benchmark
cat $T/trace > /tmp/problem-handles
This will list handles that were active for longer than 20ms. Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation. Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:
postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32
tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
dirtied_blocks 0
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit fa77dcfafe introduces block bitmap checksum calculation into
ext4_new_inode() in the case that block group was uninitialized.
However we brelse() the bitmap buffer before we attempt to checksum it
so we have no guarantee that the buffer is still there.
Fix this by releasing the buffer after the possible checksum
computation.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: stable@vger.kernel.org
commit 119c0d4460 changed
ext4_new_inode() such that the inode bitmap was being modified
outside a transaction, which could lead to corruption, and was
discovered when journal_checksum found a bad checksum in the
journal during log replay.
Nix ran into this when using the journal_async_commit mount
option, which enables journal checksumming. The ensuing
journal replay failures due to the bad checksums led to
filesystem corruption reported as the now infamous
"Apparent serious progressive ext4 data corruption bug"
[ Changed by tytso to only call ext4_journal_get_write_access() only
when we're fairly certain that we're going to allocate the inode. ]
I've tested this by mounting with journal_checksum and
running fsstress then dropping power; I've also tested by
hacking DM to create snapshots w/o first quiescing, which
allows me to test journal replay repeatedly w/o actually
power-cycling the box. Without the patch I hit a journal
checksum error every time. With this fix it survives
many iterations.
Reported-by: Nix <nix@esperi.org.uk>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
In mke2fs, we only checksum the whole bitmap block and it is right.
While in the kernel, we use EXT4_BLOCKS_PER_GROUP to indicate the
size of the checksumed bitmap which is wrong when we enable bigalloc.
The right size should be EXT4_CLUSTERS_PER_GROUP and this patch fixes
it.
Also as every caller of ext4_block_bitmap_csum_set and
ext4_block_bitmap_csum_verify pass in EXT4_BLOCKS_PER_GROUP(sb)/8,
we'd better removes this parameter and sets it in the function itself.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Recently, I ecountered some corrupted filesystems in which some
groups' free inode counts were 65535, it seemed that free inode
count was overflow. This patch teaches ext4 to check free inode
count before allocaing an inode.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit a0375156 properly notes that superblock doesn't need to be marked
as dirty when only number of free inodes / blocks / number of directories
changes since that is recomputed on each mount anyway. However that comment
leaves some unnecessary markings as dirty in place. Remove these.
Artem: tested using xfstests for both journalled and non-journalled ext4.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Make it possible for ext4_count_free to operate on buffers and not
just data in buffer_heads.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
The major new feature added in this update is Darrick J. Wong's
metadata checksum feature, which adds crc32 checksums to ext4's
metadata fields. There is also the usual set of cleanups and bug
fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=SdJJ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull Ext4 updates from Theodore Ts'o:
"The major new feature added in this update is Darrick J Wong's
metadata checksum feature, which adds crc32 checksums to ext4's
metadata fields.
There is also the usual set of cleanups and bug fixes."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (44 commits)
ext4: hole-punch use truncate_pagecache_range
jbd2: use kmem_cache_zalloc wrapper instead of flag
ext4: remove mb_groups before tearing down the buddy_cache
ext4: add ext4_mb_unload_buddy in the error path
ext4: don't trash state flags in EXT4_IOC_SETFLAGS
ext4: let getattr report the right blocks in delalloc+bigalloc
ext4: add missing save_error_info() to ext4_error()
ext4: add debugging trigger for ext4_error()
ext4: protect group inode free counting with group lock
ext4: use consistent ssize_t type in ext4_file_write()
ext4: fix format flag in ext4_ext_binsearch_idx()
ext4: cleanup in ext4_discard_allocated_blocks()
ext4: return ENOMEM when mounts fail due to lack of memory
ext4: remove redundundant "(char *) bh->b_data" casts
ext4: disallow hard-linked directory in ext4_lookup
ext4: fix potential integer overflow in alloc_flex_gd()
ext4: remove needs_recovery in ext4_mb_init()
ext4: force ro mount if ext4_setup_super() fails
ext4: fix potential NULL dereference in ext4_free_inodes_counts()
ext4/jbd2: add metadata checksumming to the list of supported features
...
Now when we set the group inode free count, we don't have a proper
group lock so that multiple threads may decrease the inode free
count at the same time. And e2fsck will complain something like:
Free inodes count wrong for group #1 (1, counted=0).
Fix? no
Free inodes count wrong for group #2 (3, counted=0).
Fix? no
Directories count wrong for group #2 (780, counted=779).
Fix? no
Free inodes count wrong for group #3 (2272, counted=2273).
Fix? no
So this patch try to protect it with the ext4_lock_group.
btw, it is found by xfstests test case 269 and the volume is
mkfsed with the parameter
"-O ^resize_inode,^uninit_bg,extent,meta_bg,flex_bg,ext_attr"
and I have run it 100 times and the error in e2fsck doesn't
show up again.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4_get_group_desc() function returns NULL on error, and
ext4_free_inodes_count() function dereferences it without checking.
There is a check on the next line, but it's too late.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
metadata_csum supersedes uninit_bg. Convert the ROCOMPAT uninit_bg
flag check to a helper function that covers both, and make the
checksum calculation algorithm use either crc16 or the metadata_csum
chosen algorithm depending on which flag is set. Print a warning if
we try to mount a filesystem with both feature flags set.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Compute and verify the checksum of the block bitmap; this checksum is
stored in the block group descriptor.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Compute and verify the checksum of the inode bitmap; the checkum is
stored in the block group descriptor.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch introduces to ext4 the ability to calculate and verify
inode checksums. This requires the use of a new ro compatibility flag
and some accompanying e2fsprogs patches to provide the relevant
features in tune2fs and e2fsck. The inode generation changes have
been integrated into this patch.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The functions ext4_msg() and ext4_error() already tack on a trailing
newline, so remove the unnecessary extra newline.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_read_{inode,block}_bitmap() we were setting bitmap_uptodate()
before submitting the buffer for read. The is bad, since we check
bitmap_uptodate() without locking the buffer, and so if another
process is racing with us, it's possible that they will think the
bitmap is uptodate even though the read has not completed yet,
resulting in inodes and blocks potentially getting allocated more than
once if we get really unlucky.
Addresses-Google-Bug: 2828254
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_claim_inode() is only called by one function,
ext4_new_inode(), and by folding the functionality into
ext4_new_inode(), we can remove almost 50 lines of code, and put all
of the logic of allocating a new inode into a single place.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
ext4. Only two ext4_{set,clear}_bit() calls check the return value. The
rest of calls ignore the return value and they can be replaced with
__{set,clear}_bit_le().
This changes ext4_{set,clear}_bit() from __test_and_{set,clear}_bit_le()
to __{set,clear}_bit_le() and introduces ext4_test_and_{set,clear}_bit()
for the two places where old bit needs to be returned.
This ext4_{set,clear}_bit() change is considered safe, because if someone
uses these macros without noticing the change, new ext4_{set,clear}_bit
don't have return value and causes compiler errors where the return value
is used.
This also removes unused ext4_find_first_zero_bit().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When insert_inode_locked() fails in ext4_new_inode() it most likely means inode
bitmap got corrupted and we allocated again inode which is already in use. Also
doing unlock_new_inode() during error recovery is wrong since the inode does
not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:)
which declares filesystem error and does not call unlock_new_inode().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Remove comments about 'extent' mount option in ext4_new_inode(), since
it's no longer exists.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The tmp_inode should have same uid/gid as the original inode.
Otherwise new metadata blocks will be accounted to wrong quota-id,
which will result in a quota leak after the inode migration is
completed.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function declarations in ext4.h are already marked extern, so it's
not necessary to do so in the .c files.
This quiets the sparse noise:
warning: function 'ext4_flush_completed_IO' with external linkage has definition
warning: function 'ext4_init_inode_table' with external linkage has definition
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For a long time now orlov is the default block allocator in the
ext4. It performs better than the old one and no one seems to claim
otherwise so we can safely drop it and make oldalloc and orlov mount
option deprecated.
This is a part of the effort to reduce number of ext4 options hence the
test matrix.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function really returns the number of clusters after initializing
an uninitalized block bitmap has been initialized.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The field bg_free_blocks_count_{lo,high} in the block group
descriptor has been repurposed to hold the number of free clusters for
bigalloc functions. So rename the functions so it makes it easier to
read and audit the block allocation and block freeing code.
Note: at this point in bigalloc development we doesn't support
online resize, so this also makes it really obvious all of the places
we need to fix up to add support for online resize.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Convert the free_blocks to be free_clusters to make the final revised
bigalloc changes easier to read/understand.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Convert the percpu counters s_dirtyblocks_counter and
s_freeblocks_counter in struct ext4_super_info to be
s_dirtyclusters_counter and s_freeclusters_counter.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
