Commit Graph

13 Commits

Author SHA1 Message Date
Allen Pais
76950e6e54 sparc64: correctly recognize SPARC64-X chips
The following patch adds support for correctly
recognizing SPARC-X chips.

cpu : Unknown SUN4V CPU
fpu : Unknown SUN4V FPU
pmu : Unknown SUN4V PMU

Signed-off-by: Katayama Yoshihiro <kata1@jp.fujitsu.com>
Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11 05:06:27 -07:00
David S. Miller
9f825962ef sparc64: Niagara-4 bzero/memset, plus use MRU stores in page copy.
This adds optimized memset/bzero/page-clear routines for Niagara-4.

We basically can do what powerpc has been able to do for a decade (via
the "dcbz" instruction), which is use cache line clearing stores for
bzero and memsets with a 'c' argument of zero.

As long as we make the cache initializing store to each 32-byte
subblock of the L2 cache line, it works.

As with other Niagara-4 optimized routines, the key is to make sure to
avoid any usage of the %asi register, as reads and writes to it cost
at least 50 cycles.

For the user clear cases, we don't use these new routines, we use the
Niagara-1 variants instead.  Those have to use %asi in an unavoidable
way.

A Niagara-4 8K page clear costs just under 600 cycles.

Add definitions of the MRU variants of the cache initializing store
ASIs.  By default, cache initializing stores install the line as Least
Recently Used.  If we know we're going to use the data immediately
(which is true for page copies and clears) we can use the Most
Recently Used variant, to decrease the likelyhood of the lines being
evicted before they get used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-05 13:45:26 -07:00
David S. Miller
ae2c6ca641 sparc64: Add SPARC-T4 optimized memcpy.
Before		After
		--------------	--------------
bw_tcp:         1288.53 MB/sec	1637.77 MB/sec
bw_pipe:        1517.18 MB/sec	2107.61 MB/sec
bw_unix:        1838.38 MB/sec	2640.91 MB/sec

make -s -j128
allmodconfig	5min 49sec	5min 31sec

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27 00:35:11 -07:00
Sam Ravnborg
b979542d62 sparc64: renamed ttable.S to ttable_64.S
To allow us to add ttable_32.S

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19 23:26:41 -07:00
David S. Miller
08cefa9fa7 sparc64: Future proof Niagara cpu detection.
Recognize T4 and T5 chips.  Treating them both as "T2 plus other
stuff" should be extremely safe and make sure distributions will work
when those chips actually ship to customers.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 14:21:33 -07:00
David S. Miller
e95ade0839 sparc: Minor tweaks to Niagara page copy/clear.
Don't use floating point on Niagara2, use the traditional
plain Niagara code instead.

Unroll Niagara loops to 128 bytes for copy, and 256 bytes
for clear.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02 21:28:32 -07:00
David S. Miller
4ba991d3eb sparc: Detect and handle UltraSPARC-T3 cpu types.
The cpu compatible string we look for is "SPARC-T3".

As far as memset/memcpy optimizations go, we treat this chip the same
as Niagara-T2/T2+.  Use cache initializing stores for memset, and use
perfetch, FPU block loads, cache initializing stores, and block stores
for copies.

We use the Niagara-T2 perf support, since T3 is a close relative in
this regard.  Later we'll add support for the new events T3 can
report, plus enable T3's new "sample" mode.

For now I haven't added any new ELF hwcap flags.  We probably need
to add a couple, for example:

T2 and T3 both support the population count instruction in hardware.

T3 supports VIS3 instructions, including support (finally) for
partitioned shift.  One can also now move directly between float
and integer registers.

T3 supports instructions meant to help with Galois Field and other HPC
calculations, such as XOR multiply.  Also there are "OP and negate"
instructions, for example "fnmul" which is multiply-and-negate.

T3 recognizes the transactional memory opcodes, however since
transactional memory isn't supported: 1) 'commit' behaves as a NOP and
2) 'chkpt' always branches 3) 'rdcps' returns all zeros and 4) 'wrcps'
behaves as a NOP.

So we'll need about 3 new elf capability flags in the end to represent
all of these things.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27 22:10:10 -07:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
David S. Miller
5a5488d3bb sparc64: Store per-cpu offset in trap_block[]
Surprisingly this actually makes LOAD_PER_CPU_BASE() a little
more efficient.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:11 -07:00
Tim Abbott
a0871e8cb8 sparc: cleanup references to deprecated .text.init* sections.
The section .text.init.refok is deprecated and __REF (.ref.text)
should be used in assembly files instead.  This patch cleans up a few
uses of .text.init.refok in the sparc architecture.

Also fix a reference to .text.init in a comment that wasn't updated to
.init.text.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27 19:51:58 -07:00
Nick Andrew
877d03105d trivial: Fix misspelling of firmware
Fix misspelling of firmware.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:21:59 +02:00
David S. Miller
40bdac7dbc sparc64: Kill .fixup section bloat.
This is an implementation of a suggestion made by Chris Torek:
--------------------
Something else I noticed in passing: the EX and EX_LD/EX_ST macros
scattered throughout the various .S files make a fair bit of .fixup
code, all of which does the same thing.  At the cost of one symbol
in copy_in_user.S, you could just have one common two-instruction
retl-and-mov-1 fixup that they all share.
--------------------

The following is with a defconfig build:

   text	   data	    bss	    dec	    hex	filename
3972767	 344024	 584449	4901240	 4ac978	vmlinux.orig
3968887	 344024	 584449	4897360	 4aba50	vmlinux

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08 22:00:55 -08:00
Sam Ravnborg
a88b5ba8bd sparc,sparc64: unify kernel/
o Move all files from sparc64/kernel/ to sparc/kernel
  - rename as appropriate
o Update sparc/Makefile to the changes
o Update sparc/kernel/Makefile to include the sparc64 files

NOTE: This commit changes link order on sparc64!

Link order had to change for either of sparc32 and sparc64.
And assuming sparc64 see more testing than sparc32 change link
order on sparc64 where issues will be caught faster.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04 09:17:21 -08:00