Commit Graph

6541 Commits

Author SHA1 Message Date
Tomi Valkeinen
40359a9b08 OMAPDSS: don't print errors on -EPROBE_DEFER
Nowadays it's normal to get -EPROBE_DEFER from, e.g., regulator_get. As
-EPROBE_DEFER is not really an error, and the driver will be probed fine
a bit later, printing an error message will just confuse the user.

This patch changes omapdss to print an error for regulator_gets only if
the error code is something else than -EPROBE_DEFER.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:55 +02:00
Tomi Valkeinen
ab7bf423af OMAPFB: give informative print when probe succeeds
It is quite common to have omapfb probe deferred because of a missing
resource, and to get omapfb probed succesfully a bit later. This works
fine. However, omapfb does not give any print on a successful probe, so
if the omapfb is actually never probed again after deferral, this is not
shown in the log.

To help debugging, add a simple print from omapfb at the end of its
probe, saying which display it is using and in which resolution.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:55 +02:00
Tomi Valkeinen
77601507bc OMAPDSS: HDMI: rename resource names
The HDMI driver tries to get the needed memory resources by name and by
ID. Resources by name are not currently defined, and will be used with
DT boot.

The resource names used in the driver are not quite perfect, and as they
are not used yet, we can change them. This patch removes the unneeded
"hdmi_" prefix from the names, and simplifies the names (e.g. hdmi_txphy
-> phy).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:54 +02:00
Tomi Valkeinen
68104467ec OMAPDSS: DSI: split DSI memory map to smaller blocks
DSI contains three separate blocks: protocol engine, PHY and PLL. At the
moment, all these are memory mapped in one big chunk. We need to split
that memory map into smaller pieces so that we can add proper 'reg'
properties into the DT data for each block.

This patch changes the driver to map the blocks separately. It first
tries to get the memory resource using name, used when booting with DT,
and if that fails, it gets the memory resource by ID, in which case the
driver gets the big chunk from platform data. That big chunk is then
split into the smaller blocks manually.

After DSS DT code has been merged and the old platform code removed, we
can clean up the memory resource management.

Instead of changing the driver in all the places where a register is
read or written, this patch takes a shortcut: it adds an additional
number to the struct which represents the register index. This number is
used to decide which base address to use. In the future we should
consider other approaches.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:54 +02:00
Tomi Valkeinen
6873efe167 OMAPDSS: HDMI: add missing core irq
HDMI_IRQ_CORE was not defined in the hdmi.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:53 +02:00
Tomi Valkeinen
42116517d2 OMAPDSS: HDMI: fix HDMI_WP_CLK name
HDMI_WP_CLK was wrongly defined as HDMI_WP_WP_CLK. Fix that.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:53 +02:00
Tomi Valkeinen
91b53e6a96 OMAPDSS: HDMI: fix hdmi_wait_for_bit_change
hdmi_wait_for_bit_change() has two issues:

The register index was passed as u16, even if the register index may be
u32. Fix the index to u32.

The function was copied from wait_for_bit_change() which waits for a
single bit to change, but the hdmi version was changed to wait for a bit
field. This change was not done correctly.

The function is supposed to return the (last) value of the bit field,
but it returned !val in case of timeout. This was correct for the single
bit version, but not for the hdmi version. Fix the function to return
the actual value in the register.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:52 +02:00
Tomi Valkeinen
be07dcd7e2 OMAPDSS: DISPC: fix context restore
DISPC_MSTANDBY_CTRL register is used in the driver, but it's not
restored in dispc_restore_context(), causing problems after resume.

Instead of adding DISPC_MSTANDBY_CTRL to dispc_restore_context(), let's
call _omap_dispc_initial_config() as the first thing in
dispc_runtime_resume(). This will initialize the DISPC core registers
properly, and will avoid similar issues in the future.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:52 +02:00
Tomi Valkeinen
f4f49c48b8 OMAPDSS: HDMI4: remove useless func calls
For some reason the hdmi driver first turns off the video output when
it's about to enable the video output. This serves no purpose, and can
be removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:51 +02:00
Archit Taneja
1e676248c8 OMAPDSS: HDMI4: Accept non-standard timings
The hdmi4 driver currently rejects any timing which is not from the CEA or VESA
standards. This leads hdmi rejecting any non-standard mode. A non standard
timing may not have a valid code corresponding to it. In such cases, the HDMI
spec suggests to set the code to 0.

Modify the driver to check if the timings fall within the range of the DISPC
TV overlay manager, and remove the check for an invalid code. Add a debug print
specifying the mode and code in hdmi_display_set_timing.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-13 12:19:51 +02:00
Tomi Valkeinen
6da9f89172 drm/omap: fix (un)registering irqs inside an irq handler
omapdrm (un)registers irqs inside an irq handler. The problem is that
the (un)register function uses dispc_runtime_get/put() to enable the
clocks, and those functions are not irq safe by default.

This was kind of fixed in 48664b21ae
(OMAPDSS: DISPC: set irq_safe for runtime PM), which makes dispc's
runtime calls irq-safe.

However, using pm_runtime_irq_safe in dispc makes the parent of dispc,
dss, always enabled, effectively preventing PM for the whole DSS module.

This patch makes omapdrm behave better by adding new irq (un)register
functions that do not use dispc_runtime_get/put, and using those
functions in interrupt context. Thus we can make dispc again
non-irq-safe, allowing proper PM.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
2014-01-09 15:15:24 +02:00
Stefano Stabellini
b1a3b1c8a8 xen/fb: allow xenfb initialization for hvm guests
There is no reasons why an HVM guest shouldn't be allowed to use xenfb.
As a matter of fact ARM guests, HVM from Linux POV, can use xenfb.
Given that no Xen toolstacks configure a xenfb backend for x86 HVM
guests, they are not affected.

Please note that at this time QEMU needs few outstanding fixes to
provide xenfb on ARM:

http://marc.info/?l=qemu-devel&m=138739419700837&w=2

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
CC: boris.ostrovsky@oracle.com
CC: plagnioj@jcrosoft.com
CC: tomi.valkeinen@ti.com
CC: linux-fbdev@vger.kernel.org
CC: konrad.wilk@oracle.com
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-07 09:59:54 -05:00
Konrad Rzeszutek Wilk
51c71a3bba xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).
The user has the option of disabling the platform driver:
00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01)

which is used to unplug the emulated drivers (IDE, Realtek 8169, etc)
and allow the PV drivers to take over. If the user wishes
to disable that they can set:

  xen_platform_pci=0
  (in the guest config file)

or
  xen_emul_unplug=never
  (on the Linux command line)

except it does not work properly. The PV drivers still try to
load and since the Xen platform driver is not run - and it
has not initialized the grant tables, most of the PV drivers
stumble upon:

input: Xen Virtual Keyboard as /devices/virtual/input/input5
input: Xen Virtual Pointer as /devices/virtual/input/input6M
------------[ cut here ]------------
kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206!
invalid opcode: 0000 [] SMP
Modules linked in: xen_kbdfront(+) xenfs xen_privcmd
CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty 
Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013
RIP: 0010:[<ffffffff813ddc40>]  [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300
Call Trace:
 [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240
 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70
 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront]
 [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront]
 [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130
 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50
 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230
 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0
 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0
 [<ffffffff8145e7d9>] driver_attach+0x19/0x20
 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220
 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0
 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20
 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40
 [<ffffffffa0015000>] ? 0xffffffffa0014fff
 [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront]
 [<ffffffff81002049>] do_one_initcall+0x49/0x170

.. snip..

which is hardly nice. This patch fixes this by having each
PV driver check for:
 - if running in PV, then it is fine to execute (as that is their
   native environment).
 - if running in HVM, check if user wanted 'xen_emul_unplug=never',
   in which case bail out and don't load any PV drivers.
 - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci)
   does not exist, then bail out and not load PV drivers.
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks',
   then bail out for all PV devices _except_ the block one.
   Ditto for the network one ('nics').
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary'
   then load block PV driver, and also setup the legacy IDE paths.
   In (v3) make it actually load PV drivers.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Add extra logic to handle the myrid ways 'xen_emul_unplug'
can be used per Ian and Stefano suggestion]
[v3: Make the unnecessary case work properly]
[v4: s/disks/ide-disks/ spotted by Fabio]
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts]
CC: stable@vger.kernel.org
2014-01-03 14:54:18 -05:00
Tomi Valkeinen
558c73e26e OMAPDSS: DSI: fix fifosize
DSI has separate TX and RX fifos. However, the current code only has one
field where the fifo size is stored, and the code for both TX and RX
config write to the same field. This has not caused issues, as we've
been using the same fifo sizes.

Fix this bug by creating separate fields for TX and RX fifo sizes.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-12-30 16:14:15 +02:00
Tomi Valkeinen
303e4697e7 OMAPDSS: rename display-sysfs 'name' entry
omapdss in compat mode creates some sysfs files into the device's sysfs
directory, including a 'name' file. This works fine for
platform_devices, but breaks with i2c or spi devices, as those already
have a 'name' file.

Fix this by renaming the omapdss's 'name' file to 'display_name'.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-12-30 16:14:15 +02:00
Tomi Valkeinen
29fceeebb6 OMAPDSS: DISPC: Add MFLAG defines
OMAP5 has MFLAG feature in DISPC. Add the register definition and dump
it. The register is not used yet, though.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-12-30 16:14:15 +02:00
Tomi Valkeinen
7a53df2c08 OMAPDSS: apply fixes
When omapfb does ovl->get_overlay_info, ovl->set_overlay_info, the set
function may fail even if the info has not been changed. This is because
omapdss doesn't initialize the info, but expect the caller to set valid
values.

Normally that is the case, but there is at least one corner case: if
omapfb has not allocated memory for the overlay yet, and the user uses
ioctl to disable the overlay to make sure it's disabled. In this case
get_overlay_info returns invalid data, but the user is only interested
in setting the overlay to disabled, not configuring it, and
set_overlay_info fails.

The issue is made possible by the omapfb's setup_plane ioctl, which
groups overlay configuration and overlay enable/disable bit into the
same struct. Thus, when you are disabling an overlay, you are also
configuring it.

This is a bit counter intuitive, so I think it's better to initialize
the info to some valid values.

The fields requiring initialization are color_mode and rotation_type,
and also we need to remove the check for (paddr == 0), as paddr is 0 for
unallocated overlay (but it's still fine to disable the overlay).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-12-30 16:14:15 +02:00
Tomi Valkeinen
ac9f24211e OMAPDSS: fix debug prints
Fix debug prints all over omapdss:
* add missing linefeeds
* change pr_err/pr_debug to DSSERR/DSSDBG
* add missing DSS_SUBSYS_NAMEs

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-12-30 16:14:15 +02:00
Tomi Valkeinen
8ee5c84271 OMAPDSS: fix missing EXPORT_SYMBOL()s
Functions dispc_ovl_set_fifo_threshold and
dispc_ovl_compute_fifo_thresholds need to be exported. Add the
EXPORT_SYMBOLs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-12-30 16:14:15 +02:00
Yinghai Lu
fc2798502f PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev
These interfaces:

  pcibios_resource_to_bus(struct pci_dev *dev, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_dev *dev, *resource, *bus_region)

took a pci_dev, but they really depend only on the pci_bus.  And we want to
use them in resource allocation paths where we have the bus but not a
device, so this patch converts them to take the pci_bus instead of the
pci_dev:

  pcibios_resource_to_bus(struct pci_bus *bus, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_bus *bus, *resource, *bus_region)

In fact, with standard PCI-PCI bridges, they only depend on the host
bridge, because that's the only place address translation occurs, but
we aren't going that far yet.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-21 10:06:10 -07:00
Masanari Iida
77d84ff87e treewide: Fix typos in printk
Correct spelling typo in various part of kernel

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-19 15:10:49 +01:00
Chris Wilson
46eeb2c144 video/fb: Propagate error code from failing to unregister conflicting fb
If we fail to remove a conflicting fb driver, we need to abort the
loading of the second driver to avoid likely kernel panics.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 10:56:13 +10:00
Fabio Estevam
ca7a97add4 backlight: pwm_bl: Remove error message upon devm_kzalloc() failure
No need to have a specific OOM message, since there is generic MM out of memory
message in place.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-17 10:18:25 +01:00
Linus Torvalds
17b2112f33 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
 "Here are a handful of powerpc fixes for 3.13.

  The patches are reasonably trivial and self contained.  Note the offb
  patches outside of arch/powerpc, they are LE fixes for our
  open-firmware 'dumb' framebuffer"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix up the kdump base cap to 128M
  powernv: Fix VFIO support with PHB3
  powerpc/52xx: Re-enable bestcomm driver in defconfigs
  powerpc/pasemi: Turn on devtmpfs in defconfig
  offb: Add palette hack for little endian
  offb: Little endian fixes
  powerpc: Fix PTE page address mismatch in pgtable ctor/dtor
  powerpc/44x: Fix ocm_block allocation
  powerpc: Fix build break with PPC_EARLY_DEBUG_BOOTX=y
  powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node
2013-12-09 19:21:39 -08:00
Cedric Le Goater
e1edf18b20 offb: Add palette hack for little endian
The pseudo palette color entries need to be ajusted for little
endian.

This patch byteswaps the values in the pseudo palette depending
on the host endian order and the screen depth.

Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-10 11:25:07 +11:00
Cedric Le Goater
212c0cbd5b offb: Little endian fixes
The "screen" properties : depth, width, height, linebytes need
to be converted to the host endian order when read from the device
tree.

The offb_init_palette_hacks() routine also made assumption on the
host endian order.

Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-10 11:25:06 +11:00
Dan Carpenter
46ac29568e video: vt8500: fix error handling in probe()
We shouldn't kfree(fbi) because that was allocated with devm_kzalloc().
There were several error paths which returned directly instead of
releasing resources.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-12-04 10:50:16 +02:00
Johan Hovold
5a0973f33b atmel_lcdfb: fix module autoload
Add missing module device table which is needed for module autoloading.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-12-04 10:48:12 +02:00
Geert Uytterhoeven
974dbcfcca fbdev: sh_mobile_meram: Fix defined but not used compiler warnings
If both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME are not set:

drivers/video/sh_mobile_meram.c:573: warning: ‘sh_mobile_meram_suspend’ defined but not used
drivers/video/sh_mobile_meram.c:597: warning: ‘sh_mobile_meram_resume’ defined but not used

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-26 16:59:42 +02:00
Sasha Levin
2ab68ec927 video: kyro: fix incorrect sizes when copying to userspace
kyro would copy u32s and specify sizeof(unsigned long) as the size to copy.

This would copy more data than intended and cause memory corruption and might
leak kernel memory.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-26 16:40:14 +02:00
Aaro Koskinen
c37dd67798 ARM: OMAPFB: panel-sony-acx565akm: fix bad unlock balance
When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig
(LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled,
the following BUG is seen during the boot:

[    7.302154] =====================================
[    7.307128] [ BUG: bad unlock balance detected! ]
[    7.312103] 3.12.0-los.git-2093492-00120-g5e01dc7  Not tainted
[    7.318450] -------------------------------------
[    7.323425] kworker/u2:1/12 is trying to release lock (&ddata->mutex) at:
[    7.330657] [<c031b760>] acx565akm_enable+0x12c/0x18c
[    7.335998] but there are no more locks to release!

Fix by removing double unlock and handling the locking completely inside
acx565akm_panel_power_on() when doing the power on.

Reported-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-26 12:49:17 +02:00
Geert Uytterhoeven
371001e502 m68k: Remove superfluous inclusions of <asm/bootinfo.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26 11:09:22 +01:00
Geert Uytterhoeven
6112ea0862 zorro: ZTWO_VADDR() should return "void __iomem *"
ZTWO_VADDR() converts from physical to virtual I/O addresses, so it should
return "void __iomem *" instead of "unsigned long".

This allows to drop several casts, but requires adding a few casts to
accomodate legacy driver frameworks that store "unsigned long" I/O
addresses.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-26 11:09:07 +01:00
Tomi Valkeinen
fc1fe6e794 OMAPDSS: add dedicated fck PLL support
This patch adds support for SoCs that have a dedicated DSS PLL used for
DSS function clock.

If there is no dss parent clock defined, it is presumed that the
functionl clock rate can be set (almost) freely. The code calculates the
highest allowed fck rate, which when divided with some integer gives the
required pck.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-18 14:32:28 +02:00
Tomi Valkeinen
688af02d22 OMAPDSS: pass pck to dss fck clock calc
We need the required pixel clock rate when calculating the dss fclk on
SoCs that have a dedicated DSS PLL.

This patch changes the code to pass the pck to the calc functions. The
pck rate is taken into use in the next patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-18 14:32:28 +02:00
Tomi Valkeinen
ada9443ff4 OMAPDSS: cleanup fck parent handling
The dss parent_clk_name currently points to a clock node which we use to
change the fclk rate. Now that we have CLK_SET_RATE_PARENT properly set,
we can set the rate directly to the fclk node.

However, we still need to calculate the possible clock rates. For this,
we need the rate of the parent of the current parent_clk.

To simplify the code, this patch changes the parent_clk_name to point to
the above mentioned parent, so that we can get the rate directly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-18 14:32:27 +02:00
Tomi Valkeinen
64ad846ffd OMAPDSS: rename parent clk variables
Rename the variables related to DSS fclk's parent: "clk_name" and
"dpll4_m4_ck", to "parent_clk_name" and "parent_clk", which much better
tell what they mean.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-18 14:32:27 +02:00
Tomi Valkeinen
9c15d76200 OMAPDSS: simplify dss clk dump
Simplify dss_dump_clocks() so that it doesn't make any presumptions
about the DSS fclks nature.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-18 14:32:26 +02:00
Tomi Valkeinen
d0f58bd3bb OMAPDSS: remove struct dss_clock_info
Remove struct dss_clock_info, as it is not usable in a case where DSS
fclk comes from a dedicated PLL. Instead, just use the fclk rate in
place of dss_clock_info, as that is all that's needed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-18 14:32:26 +02:00
Tomi Valkeinen
6e555e2752 OMAPDSS: fix omap2 dss fck handling
The driver considers OMAP2 DSS's functional clock as a fixed clock.
However, it can be changed, but the possible dividers are not continuous
which is why it was just handled as a fixed clock.

As a partial fix, this patch changes the code to handle the continous
part of the dividers, from 1 to 6. This let's us handle the OMAP2 fck
the same way as fcks on other OMAPs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-18 14:32:25 +02:00
Linus Torvalds
71f777ed50 ARM: SoC fixes for 3.13 merge window
A first set of batches of fixes for 3.13. The diffstat is large mostly
 because we're adding a defconfig for a family that's been lacking it, and
 there's some missing clock information added for i.MX and OMAP.
 
 The at91 new code is around dealing with RTC/RTT reset at boot to fix possible
 hangs due to pending wakeup interrupts coming in during early boot.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJShxvaAAoJEIwa5zzehBx3rz0P/R5I3+gENxHKXQaeRrgNRtE0
 wcrPNkNoVoIWZ8FzRg3l0qzCeF2WvFXnjS9uM4oT5IbYdCdfu6JNvVvvj6CjccE0
 9JBF+cMUqhDhjlYYPb8u4NFDmiBAjE0kr0bDX7yg1ogDn/FKbr1Zxsu1I2cYkKpF
 JKk2jzf1dnjnngJznVkX0GJy7INsloul9jBQxiHLFHy2dB9qRovW2uIfCdkJ0QjL
 2h0hwKjSdbRX8Q4jQs0mCCTNblbYFVSHgYP+FpE0BJFfNwPIItTTKGDYRu0I+pBG
 gzLMS8UWVQO4vykpXwUkkD+YfgK/1woMGpAay1rI86GIvYOEXITSsoWsNhbmJ9gp
 I4zvWETz11C9HpVQACuXIc3+5mgiHfKQdy4gp52vMUjoTOGLKSZNHWQICgxOEe0U
 qN/kXVlhA1eYkdViXfVQyCpmr3TbIgjeYmXLIlptEYyFN1W7s8L0qOSRZeBkIo66
 U+PlqjABySZZ24532eF6Dp8DLmB4jp3r0I1U17nYj5N9vTgeoyQk0x63zza5vt+Q
 n+7talaazQbFGe151g7pKFrUezPeWYZYNd5CC/wUce/VSH+XgcSlzGFkw/DPuARM
 QFtTAFTaFODt7zofQcd6L2lMIIRlRoU1aUgrb7c9YZlLl59b4BkEhD1dcc02X7pm
 Ie7rtjvHT8isVRcIWZ16
 =0oVK
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A first set of batches of fixes for 3.13.  The diffstat is large
  mostly because we're adding a defconfig for a family that's been
  lacking it, and there's some missing clock information added for i.MX
  and OMAP.

  The at91 new code is around dealing with RTC/RTT reset at boot to fix
  possible hangs due to pending wakeup interrupts coming in during early
  boot"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: OMAP2+: Fix build for dra7xx without omap4 and 5
  ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume
  doc: devicetree: Add bindings documentation for omap-des driver
  ARM: dts: doc: Document missing compatible property for omap-sham driver
  ARM: OMAP3: Beagle: fix return value check in beagle_opp_init()
  ARM: at91: fix hanged boot due to early rtt-interrupt
  ARM: at91: fix hanged boot due to early rtc-interrupt
  video: exynos_mipi_dsim: Remove unused variable
  ARM: highbank: only select errata 764369 if SMP
  ARM: sti: only select errata 764369 if SMP
  ARM: tegra: init fuse before setting reset handler
  ARM: vt8500: add defconfig for v6/v7 chips
  ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCD
  ARM: OMAP: devicetree: fix SPI node compatible property syntax items
  pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
  ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
  MAINTAINERS: drop discontinued mailing list
  ARM: dts: i.MX51: Fix OTG PHY clock
  ARM: imx: set up pllv3 POWER and BYPASS sequentially
  ARM: imx: pllv3 needs relock in .set_rate() call
  ...
2013-11-16 12:45:55 -08:00
Linus Torvalds
0bde7294e2 pwm: Changes for v3.13-rc1
Mostly bug fixes and clean up. There is a new driver, which is actually
 moving a custom PWM driver from drivers/misc.
 
 The majority of the patches are enhancements to the device tree support
 in the pwm-backlight driver. Backlights can now additionally be powered
 using a regulator and enabled using a GPIO in addition to just the PWM
 input.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSh1s7AAoJEN0jrNd/PrOhdS4P/1A/Tx05pP0ACsizhkB4Ro02
 XgjIusWw/jp+3LWXrlaReVNb5H6GlahDT5+2/ApAw06o7INGvpSzyI1fuFQ2DU6K
 L7MgWDSifeL7jiwfUq5f3Qv4Vccjgii0z4BBQI5ZpPluIzKpo2uhz7gIjBR3wPu9
 i34bc902SL/DrlvbMUsRHlYT9Ok3TpsPynk0pmw8xrUZDqRAX7DZH0EmvMkVsDo2
 T1vt9gQVTFVgIwlRUBcbrjbu1GnYaV20s+piQhYm1RMSUqY+ArldWKzEzlN3tLYc
 XdnkaLikdHDRBA4DeNPJGbPU8LQax8wCTaZa1PgT0PqjNX/dCkg3hsc1Em0dH9Zh
 PKvyX8R6iPdOcakkRm4qdVIacblqE1HYM7T+lyVhu6XP7MWkUmNr05HQBFjhOMcm
 whv1gS/EeB4y/FcSzn7S23UAmOvxiWfGnOMlnazrOgS00FrbC4accgSB/iXi2lDC
 szO9MHwfbwDTp8WBLEw8iTPODpq7pnFcBCw80pzblMFqC8v1MAFyriwT7BUmKcR/
 h/V75Q95VPAKq+uKsfb5Ruwa9CGKs8ACagLR0BuErT/J83Q7Q4Ezf56FUCvrGDtz
 5AWpGUakotwHtJPx6TAOgI+237MFh/GpIOrlEtz+2b5SP6ftHxr8rj+wg1sxmI2y
 JohOUIFjHtcA4UifhlTU
 =CB+z
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "Mostly bug fixes and clean up.  There is a new driver, which is
  actually moving a custom PWM driver from drivers/misc.

  The majority of the patches are enhancements to the device tree
  support in the pwm-backlight driver.  Backlights can now additionally
  be powered using a regulator and enabled using a GPIO in addition to
  just the PWM input"

* tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
  Documentation/pwm: Update supported SoC name for pwm-samsung
  pwm: samsung: Fix kernel warning while unexporting a channel
  MAINTAINERS: Move PWM subsystem tree to kernel.org
  Documentation/pwm: Fix trivial typos
  pwm-backlight: Remove unused variable
  pwm_backlight: avoid short blank screen while doing hibernation
  pwm-backlight: Fix brightness adjustment
  pwm: add ep93xx PWM support
  pwm-backlight: Allow for non-increasing brightness levels
  pwm-backlight: Add power supply support
  pwm-backlight: Use new enable_gpio field
  unicore32: Initialize PWM backlight enable_gpio field
  ARM: shmobile: Initialize PWM backlight enable_gpio field
  ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
  ARM: pxa: Initialize PWM backlight enable_gpio field
  ARM: OMAP: Initialize PWM backlight enable_gpio field
  pwm-backlight: Add optional enable GPIO
  pwm-backlight: Track enable state
  pwm-backlight: Refactor backlight power on/off
  pwm-backlight: Improve readability
  ...
2013-11-16 12:21:40 -08:00
Olof Johansson
6886059f2e Few clock fixes, a runtime PM fix, and pinctrl-single fix along
with few other fixes that popped up during the merge window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJShlFZAAoJEBvUPslcq6VzqhsP/Rrk0QYGfOysjNa+6rvCBcqL
 +eupoQvhgRC8W3XkXlRPcfatoOWNy9aPxJXgHcuMMQNdOdtKlhXUyOFPseNOuZrb
 rJcvQNrbMrOv4yP4ZgknKvk8kbDLdJfcdd1LChOsIZW2X0wdrAljzlEehl0YB5ZU
 HdxxmLaNleqJfUwtrXVMPdQiS+FggrvYzDmXeEqpASXH7fnBLHOs8hrK3lMY4g2T
 t9JFAzqeHWONUcZoIy0LvgxhmG6P/5nIgyvq9vD17Hd+xkQeJM0GdLRDgOdWxuIC
 3yADWwWoVdeJ+bge+lVItNSnewb5tlSaybwu5Oqxze2o7DXysLPC2IdCUT9NwADz
 j4Wbqv6GdLdhylI7STZRIfznAQ/k16DLZj8xLVF1UOtDN8aq/UcPqNPVUr83Vhgs
 n7bDQFillCY1FWpQPA/AWDUg++dMT0nz7w6a3dfxPjzeaJuDL1hN2yMXbaoMBMcI
 i+DAnmxxEwLDGtCNLO5o0iw8xkL7GhE1jwaQp7YQpXcax4ImN4WZy8g2vT3J1iHQ
 027vzFE+pUp08AoB+Ug5dPr+UDPqE6EJIc9G5F0x7euL7SC0DuEAld/CPzr/nUgN
 g3lfQq/1vmtUVnmGUKoJHv0ysROLGOgdUx897oSdgLw+3F79KiB5g7SnJCOFEnGC
 kLwouf9DjMhPwudW75X+
 =4fww
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.13/fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Few clock fixes, a runtime PM fix, and pinctrl-single fix along
with few other fixes that popped up during the merge window.

* tag 'omap-for-v3.13/fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix build for dra7xx without omap4 and 5
  ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume
  doc: devicetree: Add bindings documentation for omap-des driver
  ARM: dts: doc: Document missing compatible property for omap-sham driver
  ARM: OMAP3: Beagle: fix return value check in beagle_opp_init()
  ARM: OMAP: devicetree: fix SPI node compatible property syntax items
  pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
  ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
  + sync with newer trunk
2013-11-15 15:17:59 -08:00
Linus Torvalds
049ffa8ab3 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is a combo of -next and some -fixes that came in in the
  intervening time.

  Highlights:

  New drivers:
    ARM Armada driver for Marvell Armada 510 SOCs

  Intel:
    Broadwell initial support under a default off switch,
    Stereo/3D HDMI mode support
    Valleyview improvements
    Displayport improvements
    Haswell fixes
    initial mipi dsi panel support
    CRC support for debugging
    build with CONFIG_FB=n

  Radeon:
    enable DPM on a number of GPUs by default
    secondary GPU powerdown support
    enable HDMI audio by default
    Hawaii support

  Nouveau:
    dynamic pm code infrastructure reworked, does nothing major yet
    GK208 modesetting support
    MSI fixes, on by default again
    PMPEG improvements
    pageflipping fixes

  GMA500:
    minnowboard SDVO support

  VMware:
    misc fixes

  MSM:
    prime, plane and rendernodes support

  Tegra:
    rearchitected to put the drm driver into the drm subsystem.
    HDMI and gr2d support for tegra 114 SoC

  QXL:
    oops fix, and multi-head fixes

  DRM core:
    sysfs lifetime fixes
    client capability ioctl
    further cleanups to device midlayer
    more vblank timestamp fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (789 commits)
  drm/nouveau: do not map evicted vram buffers in nouveau_bo_vma_add
  drm/nvc0-/gr: shift wrapping bug in nvc0_grctx_generate_r406800
  drm/nouveau/pwr: fix missing mutex unlock in a failure path
  drm/nv40/therm: fix slowing down fan when pstate undefined
  drm/nv11-: synchronise flips to vblank, unless async flip requested
  drm/nvc0-: remove nasty fifo swmthd hack for flip completion method
  drm/nv10-: we no longer need to create nvsw object on user channels
  drm/nouveau: always queue flips relative to kernel channel activity
  drm/nouveau: there is no need to reserve/fence the new fb when flipping
  drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence
  drm/nouveau: allow nouveau_fence_ref() to be a noop
  drm/nvc8/mc: msi rearm is via the nvc0 method
  drm/ttm: Fix vma page_prot bit manipulation
  drm/vmwgfx: Fix a couple of compile / sparse warnings and errors
  drm/vmwgfx: Resource evict fixes
  drm/edid: compare actual vrefresh for all modes for quirks
  drm: shmob_drm: Convert to clk_prepare/unprepare
  drm/nouveau: fix 32-bit build
  drm/i915/opregion: fix build error on CONFIG_ACPI=n
  Revert "drm/radeon/audio: don't set speaker allocation on DCE4+"
  ...
2013-11-15 14:19:54 +09:00
Olof Johansson
ba52b7d4af video: exynos_mipi_dsim: Remove unused variable
commit 7e0be9f9f7 ('video: exynos_mipi_dsim:
Use the generic PHY driver') resulted in a warning about an unused
variable:

drivers/video/exynos/exynos_mipi_dsi.c:144:26: warning: unused variable
    'pdev' [-Wunused-variable]

It is indeed unused; remove it.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
2013-11-14 18:00:19 -08:00
Wolfram Sang
16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Linus Torvalds
f0d55cc1a6 fbdev changes for 3.13
Nothing particularly stands out in this pull request. The biggest part of the
 changes are cleanups.
 
 Maybe one fix to mention is the "fb: reorder the lock sequence to fix potential
 dead lock" which hopefully fixes the fb locking issues reported by multiple
 persons.
 
 There are also a few commits that have changes to arch/arm/mach-at91 and
 arch/avr32, which have been acked by the maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSg2oCAAoJEPo9qoy8lh71vXsP/2AjkzOlcKBPutMG/W30QMHT
 tkKfr/RL8C3oXcimkE6ch3ksbFj2t5corxa/DLTdESdTpeFAgxj72pcdhN3X4+Xs
 7IokExM2W5s6p4pP66PTr2A5XhEyAHtEMp+2JbHPRzwZitblzBLZvuPUJljwJDpj
 Z9+sD00xv/MZrXDCsEN8k2xdJ3rFn6JgX267y1qajlsocZoseTF2ed94IN/YnIM7
 B2hra1B4E21FPYLzRDOJRmZa0YGomLTymezPnPg33hLBhnJU/aG4HLDHKUZWhduz
 /6UwACH63ja7I2z/8AZHQ1ACdbGheRtHbjwV9LLYlbaAvPmUqNTZ4b6UeQOb/EZ0
 3SPCYbwD6+RMhSx/j/XhySvw82RY0i1aTlTDyjgOggfrfdi4x1Wk54bUWp5l9O3D
 SX1vSpNLGSh4GKXRzJjf3jouG/LcOzlpDlVZXzgsPzkyirluUv6QdMTopJwFwIGx
 rFgtsbkvhEsFvaNhhVIqQXKfwZ69r42U5JC+fDM5u7VX0mqyJ1usUNGvNSeifcDg
 EwUAI6RGnOXCO6crj2BZYpRTdc61tnY9b4CGLHDCeQkEXokEsEJ7Mz+8YfSwFo7X
 wqh+dAPQaixeHtUFZ8GhHXeAsjoQRSBXygf3NSNmCeP3WsmuozbauuujSrrTHITp
 LOXFPhU9uxHu4mDd6wrq
 =59+j
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev changes from Tomi Valkeinen:
 "Nothing particularly stands out in this pull request.  The biggest
  part of the changes are cleanups.

  Maybe one fix to mention is the "fb: reorder the lock sequence to fix
  potential dead lock" which hopefully fixes the fb locking issues
  reported by multiple persons.

  There are also a few commits that have changes to arch/arm/mach-at91
  and arch/avr32, which have been acked by the maintainers"

* tag 'fbdev-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (143 commits)
  fb: reorder the lock sequence to fix potential dead lock
  fbdev: shmobile-lcdcfb: Convert to clk_prepare/unprepare
  fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare
  omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  video: exynos_mipi_dsi: Unlock the mutex before returning
  video: da8xx-fb: remove unwanted define
  video: Remove unnecessary semicolons
  simplefb: use write-combined remapping
  simplefb: fix unmapping fb during destruction
  OMAPDSS: connector-dvi: fix releasing i2c_adapter
  OMAPDSS: DSI: fix perf measuring ifdefs
  framebuffer: Use fb_<level>
  framebuffer: Add fb_<level> convenience logging macros
  efifb: prevent null-deref when iterating dmi_list
  fbdev: fix error return code in metronomefb_probe()
  video: xilinxfb: Fix for "Use standard variable name convention"
  OMAPDSS: Fix de_level in videomode_to_omap_video_timings()
  video: xilinxfb: Simplify error path
  video: xilinxfb: Use devm_kzalloc instead of kzalloc
  video: xilinxfb: Use standard variable name convention
  ...
2013-11-14 14:44:20 +09:00
Linus Torvalds
f9300eaaac ACPI and power management updates for 3.13-rc1
- New power capping framework and the the Intel Running Average Power
    Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
 
  - Addition of the in-kernel switching feature to the arm_big_little
    cpufreq driver from Viresh Kumar and Nicolas Pitre.
 
  - cpufreq support for iMac G5 from Aaro Koskinen.
 
  - Baytrail processors support for intel_pstate from Dirk Brandewie.
 
  - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
 
  - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
 
  - ACPI power management support for the I2C and SPI bus types from
    Mika Westerberg and Lv Zheng.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
    Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
 
  - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
    Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
    Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
 
  - intel_pstate updates from Dirk Brandewie and Adrian Huang.
 
  - ACPICA update to version 20130927 includig fixes and cleanups and
    some reduction of divergences between the ACPICA code in the kernel
    and ACPICA upstream in order to improve the automatic ACPICA patch
    generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki,
    Naresh Bhat, Bjorn Helgaas, David E Box.
 
  - ACPI IPMI driver fixes and cleanups from Lv Zheng.
 
  - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
    Zhang Yanfei, Rafael J Wysocki.
 
  - Conversion of the ACPI AC driver to the platform bus type and
    multiple driver fixes and cleanups related to ACPI from Zhang Rui.
 
  - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
    Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
 
  - Fixes and cleanups and new blacklist entries related to the ACPI
    video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
    Kirill Tkhai.
 
  - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
 
  - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
    Bartlomiej Zolnierkiewicz, Prarit Bhargava.
 
  - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
 
  - Operation Performance Points (OPP) core updates from Nishanth Menon.
 
  - Runtime power management core fix from Rafael J Wysocki and update
    from Ulf Hansson.
 
  - Hibernation fixes from Aaron Lu and Rafael J Wysocki.
 
  - Device suspend/resume lockup detection mechanism from Benoit Goby.
 
  - Removal of unused proc directories created for various ACPI drivers
    from Lan Tianyu.
 
  - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
    handler from Heikki Krogerus and Jarkko Nikula.
 
  - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
 
  - Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
    Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
    Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
    Liu Chuansheng.
 
  - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
    Jean-Christophe Plagniol-Villard.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSfPKLAAoJEILEb/54YlRxH6YQAJwDKi25RCZziFSIenXuqzC/
 c6JxoH/tSnDHJHhcTgqh7H7Raa+zmatMDf0m2oEv2Wjfx4Lt4BQK4iefhe/zY4lX
 yJ8uXDg+U8DYhDX2XwbwnFpd1M1k/A+s2gIHDTHHGnE0kDngXdd8RAFFktBmooTZ
 l5LBQvOrTlgX/ZfqI/MNmQ6lfY6kbCABGSHV1tUUsDA6Kkvk/LAUTOMSmptv1q22
 hcs6k55vR34qADPkUX5GghjmcYJv+gNtvbDEJUjcmCwVoPWouF415m7R5lJ8w3/M
 49Q8Tbu5HELWLwca64OorS8qh/P7sgUOf1BX5IDzHnJT+TGeDfvcYbMv2Z275/WZ
 /bqhuLuKBpsHQ2wvEeT+lYV3FlifKeTf1FBxER3ApjzI3GfpmVVQ+dpEu8e9hcTh
 ZTPGzziGtoIsHQ0unxb+zQOyt1PmIk+cU4IsKazs5U20zsVDMcKzPrb19Od49vMX
 gCHvRzNyOTqKWpE83Ss4NGOVPAG02AXiXi/BpuYBHKDy6fTH/liKiCw5xlCDEtmt
 lQrEbupKpc/dhCLo5ws6w7MZzjWJs2eSEQcNR4DlR++pxIpYOOeoPTXXrghgZt2X
 mmxZI2qsJ7GAvPzII8OBeF3CRO3fabZ6Nez+M+oEZjGe05ZtpB3ccw410HwieqBn
 dYpJFt/BHK189odhV9CM
 =JCxk
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael J Wysocki:

 - New power capping framework and the the Intel Running Average Power
   Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.

 - Addition of the in-kernel switching feature to the arm_big_little
   cpufreq driver from Viresh Kumar and Nicolas Pitre.

 - cpufreq support for iMac G5 from Aaro Koskinen.

 - Baytrail processors support for intel_pstate from Dirk Brandewie.

 - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.

 - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.

 - ACPI power management support for the I2C and SPI bus types from Mika
   Westerberg and Lv Zheng.

 - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
   Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.

 - cpufreq drivers updates (mostly fixes and cleanups) from Viresh
   Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
   Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.

 - intel_pstate updates from Dirk Brandewie and Adrian Huang.

 - ACPICA update to version 20130927 includig fixes and cleanups and
   some reduction of divergences between the ACPICA code in the kernel
   and ACPICA upstream in order to improve the automatic ACPICA patch
   generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
   Bhat, Bjorn Helgaas, David E Box.

 - ACPI IPMI driver fixes and cleanups from Lv Zheng.

 - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
   Yanfei, Rafael J Wysocki.

 - Conversion of the ACPI AC driver to the platform bus type and
   multiple driver fixes and cleanups related to ACPI from Zhang Rui.

 - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
   Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.

 - Fixes and cleanups and new blacklist entries related to the ACPI
   video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
   Kirill Tkhai.

 - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.

 - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
   Bartlomiej Zolnierkiewicz, Prarit Bhargava.

 - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.

 - Operation Performance Points (OPP) core updates from Nishanth Menon.

 - Runtime power management core fix from Rafael J Wysocki and update
   from Ulf Hansson.

 - Hibernation fixes from Aaron Lu and Rafael J Wysocki.

 - Device suspend/resume lockup detection mechanism from Benoit Goby.

 - Removal of unused proc directories created for various ACPI drivers
   from Lan Tianyu.

 - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
   handler from Heikki Krogerus and Jarkko Nikula.

 - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.

 - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
   Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
   Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
   Liu Chuansheng.

 - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
   Jean-Christophe Plagniol-Villard.

* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
  cpufreq: conservative: fix requested_freq reduction issue
  ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
  PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
  ACPI / event: remove unneeded NULL pointer check
  Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
  ACPI / video: Quirk initial backlight level 0
  ACPI / video: Fix initial level validity test
  intel_pstate: skip the driver if ACPI has power mgmt option
  PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
  ACPI / hotplug: Do not execute "insert in progress" _OST
  ACPI / hotplug: Carry out PCI root eject directly
  ACPI / hotplug: Merge device hot-removal routines
  ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
  ACPI / hotplug: Simplify device ejection routines
  ACPI / hotplug: Fix handle_root_bridge_removal()
  ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
  ACPI / scan: Start matching drivers after trying scan handlers
  ACPI: Remove acpi_pci_slot_init() headers from internal.h
  ACPI / blacklist: fix name of ThinkPad Edge E530
  PowerCap: Fix build error with option -Werror=format-security
  ...

Conflicts:
	arch/arm/mach-omap2/opp.c
	drivers/Kconfig
	drivers/spi/spi.c
2013-11-14 13:41:48 +09:00
Linus Torvalds
8ceafbfa91 Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm
Pull DMA mask updates from Russell King:
 "This series cleans up the handling of DMA masks in a lot of drivers,
  fixing some bugs as we go.

  Some of the more serious errors include:
   - drivers which only set their coherent DMA mask if the attempt to
     set the streaming mask fails.
   - drivers which test for a NULL dma mask pointer, and then set the
     dma mask pointer to a location in their module .data section -
     which will cause problems if the module is reloaded.

  To counter these, I have introduced two helper functions:
   - dma_set_mask_and_coherent() takes care of setting both the
     streaming and coherent masks at the same time, with the correct
     error handling as specified by the API.
   - dma_coerce_mask_and_coherent() which resolves the problem of
     drivers forcefully setting DMA masks.  This is more a marker for
     future work to further clean these locations up - the code which
     creates the devices really should be initialising these, but to fix
     that in one go along with this change could potentially be very
     disruptive.

  The last thing this series does is prise away some of Linux's addition
  to "DMA addresses are physical addresses and RAM always starts at
  zero".  We have ARM LPAE systems where all system memory is above 4GB
  physical, hence having DMA masks interpreted by (eg) the block layers
  as describing physical addresses in the range 0..DMAMASK fails on
  these platforms.  Santosh Shilimkar addresses this in this series; the
  patches were copied to the appropriate people multiple times but were
  ignored.

  Fixing this also gets rid of some ARM weirdness in the setup of the
  max*pfn variables, and brings ARM into line with every other Linux
  architecture as far as those go"

* 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits)
  ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
  ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
  ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
  ARM: DMA-API: better handing of DMA masks for coherent allocations
  ARM: 7857/1: dma: imx-sdma: setup dma mask
  DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
  DMA-API: dcdbas: update DMA mask handing
  DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
  DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
  DMA-API: crypto: remove last references to 'static struct device *dev'
  DMA-API: crypto: fix ixp4xx crypto platform device support
  DMA-API: others: use dma_set_coherent_mask()
  DMA-API: staging: use dma_set_coherent_mask()
  DMA-API: usb: use new dma_coerce_mask_and_coherent()
  DMA-API: usb: use dma_set_coherent_mask()
  DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
  DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
  DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
  ...
2013-11-14 07:55:21 +09:00
Sachin Kamat
c962f7b95c drivers/video/backlight/hx8357.c: remove redundant of_match_ptr
'hx8357_dt_ids' is always compiled in.  Hence of_match_ptr is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:22 +09:00
Johan Hovold
9b3521ee8f backlight: atmel-pwm-bl: use gpio_request_one
Use devm_gpio_request_one rather than requesting and setting direction
in two calls.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:22 +09:00
Johan Hovold
81b62db56d backlight: atmel-pwm-bl: refactor gpio_on handling
Add helper function to control the gpio_on signal.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:21 +09:00
Johan Hovold
5ada4550e8 backlight: atmel-pwm-bl: use gpio_is_valid
Use gpio_is_valid rather than open coding the more restrictive != -1
test.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:21 +09:00
Johan Hovold
7bb8abe6ed backlight: atmel-pwm-bl: remove unused include
Remove unused include of clk.h.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:21 +09:00
Johan Hovold
9a26a84e3f backlight: atmel-pwm-bl: clean up get_intensity
Clean up get_intensity to increase readability.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:21 +09:00
Johan Hovold
ce726c9738 backlight: atmel-pwm-bl: clean up probe error handling
Clean up probe error handling by checking parameters before any
allocations and removing an obsolete error label.  Also remove unnecessary
reset of private gpio number.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:21 +09:00
Johan Hovold
5c057e5570 backlight: atmel-pwm-bl: fix module autoload
Add missing module alias which is needed for module autoloading.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:21 +09:00
Johan Hovold
ad5066d4c2 backlight: atmel-pwm-bl: fix gpio polarity in remove
Make sure to honour gpio polarity also at remove so that the backlight is
actually disabled on boards with active-low enable pin.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:21 +09:00
Johan Hovold
185d914425 backlight: atmel-pwm-bl: fix reported brightness
The driver supports 16-bit brightness values, but the value returned
from get_brightness was truncated to eight bits.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:20 +09:00
Wei Yongjun
bcd5b41656 drivers/video/backlight/lm3630a_bl.c: add missing destroy_workqueue() on error in lm3630a_intr_config()
Add the missing destroy_workqueue() before return from
lm3630a_intr_config() in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:20 +09:00
Jingoo Han
a18863f5e8 backlight: s6e63m0: use devm_{backlight,lcd}_device_register()
Use devm_backlight_device_register() and devm_lcd_device_register() to
make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:20 +09:00
Jingoo Han
289a65e46b backlight: cr_bllcd: use devm_{backlight,lcd}_device_register()
Use devm_backlight_device_register() and devm_lcd_device_register() to
make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:20 +09:00
Jingoo Han
10645a1d18 backlight: corgi_lcd: use devm_{backlight,lcd}_device_register()
Use devm_backlight_device_register() and devm_lcd_device_register() to
make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:20 +09:00
Jingoo Han
7a78e1b24b backlight: ld9040: use devm_{backlight,lcd}_device_register()
Use devm_backlight_device_register() and devm_lcd_device_register() to
make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:20 +09:00
Jingoo Han
ebc41e43b2 backlight: ams369fg06: use devm_{backlight,lcd}_device_register()
Use devm_backlight_device_register() and devm_lcd_device_register() to
make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:20 +09:00
Jingoo Han
0524fc5194 backlight: tdo24m: use devm_lcd_device_register()
Use devm_lcd_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:20 +09:00
Jingoo Han
1f9ca1eee8 backlight: platform_lcd: use devm_lcd_device_register()
Use devm_lcd_device_register() to make cleanup paths simpler, and remove
unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:19 +09:00
Jingoo Han
e8796d9f4f backlight: ltv350qv: use devm_lcd_device_register()
Use devm_lcd_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:19 +09:00
Jingoo Han
8358741ab7 backlight: lms501kf03: use devm_lcd_device_register()
Use devm_lcd_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:19 +09:00
Jingoo Han
0a1c55d021 backlight: lms283gf05: use devm_lcd_device_register()
Use devm_lcd_device_register() to make cleanup paths simpler, and remove
unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:19 +09:00
Jingoo Han
5690378efa backlight: ili9320: use devm_lcd_device_register()
Use devm_lcd_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:19 +09:00
Jingoo Han
a7e9e3ffd7 backlight: ili922x: use devm_lcd_device_register()
Use devm_lcd_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:19 +09:00
Jingoo Han
ea5092c890 backlight: hx8357: use devm_lcd_device_register()
Use devm_lcd_device_register() to make cleanup paths simpler, and remove
unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:19 +09:00
Jingoo Han
f369e66449 backlight: wm831x_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:18 +09:00
Jingoo Han
626d09089f backlight: tps65217_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:18 +09:00
Jingoo Han
c423a77121 backlight: pcf50633: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:18 +09:00
Jingoo Han
75d4baec9b backlight: pandora_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:18 +09:00
Jingoo Han
18d9dbce46 backlight: max8925_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:18 +09:00
Jingoo Han
e924c2aadf backlight: lv5207lp: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:18 +09:00
Jingoo Han
6255e8e984 backlight: lp855x: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.  Also,
unnecessary lp855x_backlight_unregister() is removed.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:18 +09:00
Jingoo Han
e86c709894 backlight: lm3533_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:18 +09:00
Jingoo Han
da6537850e backlight: kb3886_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:17 +09:00
Jingoo Han
ff47201582 backlight: gpio_backlight: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:17 +09:00
Jingoo Han
de2efd2a9f backlight: generic_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:17 +09:00
Jingoo Han
23741ada20 backlight: ep93xx: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:17 +09:00
Jingoo Han
02f0092cb3 backlight: da9052_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:17 +09:00
Jingoo Han
5644529383 backlight: da903x_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:17 +09:00
Jingoo Han
26faf15cc6 backlight: bd6107: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:17 +09:00
Jingoo Han
3e61c73c52 backlight: atmel-pwm-bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:16 +09:00
Jingoo Han
83dedc056b backlight: as3711_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:16 +09:00
Jingoo Han
568ee6c3c8 backlight: adp8870: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:16 +09:00
Jingoo Han
91fa4ee8f4 backlight: adp8860: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:16 +09:00
Jingoo Han
5f652c710d backlight: adp5520: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:16 +09:00
Jingoo Han
c7a2bf3b21 backlight: aat2870: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:16 +09:00
Jingoo Han
f829c9ef82 backlight: 88pm860x_bl: use devm_backlight_device_register()
Use devm_backlight_device_register() to make cleanup paths simpler, and
remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:16 +09:00
Jingoo Han
c512794cad backlight: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to
make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:16 +09:00
Jingoo Han
1f299997b4 backlight: lp8788: staticize 'default_bl_config'
Fix the following sparse warning:

  drivers/video/backlight/lp8788_bl.c:55:25: warning: symbol 'default_bl_config' was not declared. Should it be static?

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:15 +09:00
Jingoo Han
0ab7b20fa0 backlight: lm3639: don't mix different enum types
Don't mix different enum types to fix the sparse warnings.

  drivers/video/backlight/lm3639_bl.c:80:51: warning: mixing different enum types
  drivers/video/backlight/lm3639_bl.c:80:51:     int enum lm3639_fleds  versus
  drivers/video/backlight/lm3639_bl.c:80:51:     int enum lm3639_bleds
  drivers/video/backlight/lm3639_bl.c:82:51: warning: mixing different enum types
  drivers/video/backlight/lm3639_bl.c:82:51:     int enum lm3639_fleds  versus
  drivers/video/backlight/lm3639_bl.c:82:51:     int enum lm3639_bleds

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:15 +09:00
Jingoo Han
86b15d5d3b backlight: ld9040: Staticize local variable gamma_table
Fix the following sparse warnings:

  drivers/video/backlight/ld9040_gamma.h:172:3: warning: symbol 'gamma_table' was not declared. Should it be static?

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:15 +09:00
Daniel Jeong
4c4d2a3a06 backlight: lm3630: fix sparse warning
This patch is to fix sparse warning due to mixing different enum type.

Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:15 +09:00
Dan Carpenter
e19493c1f2 drivers/video/backlight/lm3630a_bl.c: potential NULL deref in probe()
We dereference "pdata" later in the function so we can't leave it as NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:15 +09:00
Dan Carpenter
2a0c316bf3 drivers/video/backlight/lm3630a_bl.c: fix signedness bug in lm3630a_chip_init()
"rval" needs to be signed for the error handling to work.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:15 +09:00
Daniel Jeong
28e64a68a2 backlight: lm3630: apply chip revision
The LM3630 chip was revised by TI and chip name was also changed to
LM3630A.  And register map, default values and initial sequences are
changed.  The files, lm3630_bl.{c,h} are replaced by lm3630a_bl.{c,h} You
can find more information about LM3630A(datasheet, evm etc) at
http://www.ti.com/product/lm3630a

Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:15 +09:00
Milo Kim
5812c13a4e backlight: lp855x_bl: support new LP8555 device
LP8555 is one of the LP855x family devices.

This device needs pre_init_device() and post_init_device() driver
structure.  It's same as LP8557, so the device configuration code is
shared with LP8557.  Backlight outputs are generated from dual DC-DC boost
converters.  It's configurable EPROM settings which are defined in the
platform data.

Driver documentation and device tree bindings are updated.

Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:14 +09:00
Xishi Qiu
3207d9e72c drivers/video/acornfb.c: use __free_reserved_page() to simplify the code
Use __free_reserved_page() to simplify the code in the others.

Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:03 +09:00
Linus Torvalds
10d0c9705e DeviceTree updates for 3.13. This is a bit larger pull request than
usual for this cycle with lots of clean-up.
 
 - Cross arch clean-up and consolidation of early DT scanning code.
 - Clean-up and removal of arch prom.h headers. Makes arch specific
   prom.h optional on all but Sparc.
 - Addition of interrupts-extended property for devices connected to
   multiple interrupt controllers.
 - Refactoring of DT interrupt parsing code in preparation for deferred
   probe of interrupts.
 - ARM cpu and cpu topology bindings documentation.
 - Various DT vendor binding documentation updates.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJSgPQ4AAoJEMhvYp4jgsXif28H/1WkrXq5+lCFQZF8nbYdE2h0
 R8PsfiJJmAl6/wFgQTsRel+ScMk2hiP08uTyqf2RLnB1v87gCF7MKVaLOdONfUDi
 huXbcQGWCmZv0tbBIklxJe3+X3FIJch4gnyUvPudD1m8a0R0LxWXH/NhdTSFyB20
 PNjhN/IzoN40X1PSAhfB5ndWnoxXBoehV/IVHVDU42vkPVbVTyGAw5qJzHW8CLyN
 2oGTOalOO4ffQ7dIkBEQfj0mrgGcODToPdDvUQyyGZjYK2FY2sGrjyquir6SDcNa
 Q4gwatHTu0ygXpyphjtQf5tc3ZCejJ/F0s3olOAS1ahKGfe01fehtwPRROQnCK8=
 =GCbY
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DeviceTree updates for 3.13.  This is a bit larger pull request than
  usual for this cycle with lots of clean-up.

   - Cross arch clean-up and consolidation of early DT scanning code.
   - Clean-up and removal of arch prom.h headers.  Makes arch specific
     prom.h optional on all but Sparc.
   - Addition of interrupts-extended property for devices connected to
     multiple interrupt controllers.
   - Refactoring of DT interrupt parsing code in preparation for
     deferred probe of interrupts.
   - ARM cpu and cpu topology bindings documentation.
   - Various DT vendor binding documentation updates"

* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
  powerpc: add missing explicit OF includes for ppc
  dt/irq: add empty of_irq_count for !OF_IRQ
  dt: disable self-tests for !OF_IRQ
  of: irq: Fix interrupt-map entry matching
  MIPS: Netlogic: replace early_init_devtree() call
  of: Add Panasonic Corporation vendor prefix
  of: Add Chunghwa Picture Tubes Ltd. vendor prefix
  of: Add AU Optronics Corporation vendor prefix
  of/irq: Fix potential buffer overflow
  of/irq: Fix bug in interrupt parsing refactor.
  of: set dma_mask to point to coherent_dma_mask
  of: add vendor prefix for PHYTEC Messtechnik GmbH
  DT: sort vendor-prefixes.txt
  of: Add vendor prefix for Cadence
  of: Add empty for_each_available_child_of_node() macro definition
  arm/versatile: Fix versatile irq specifications.
  of/irq: create interrupts-extended property
  microblaze/pci: Drop PowerPC-ism from irq parsing
  of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
  of/irq: Use irq_of_parse_and_map()
  ...
2013-11-12 16:52:17 +09:00
Linus Torvalds
340286cd4e Merge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS changes from Ingo Molnar:
 "The biggest change adds support for Intel 'CPER' (UEFI Common Platform
  Error Record) error logging, which builds upon an enhanced error
  logging mechanism available on Xeon processors.

  Full description is here:

    http://www.intel.com/content/www/us/en/architecture-and-technology/enhanced-mca-logging-xeon-paper.html

  This change provides a module (and support code) to check for an
  extended error log and prints extra details about the error on the
  console"

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ACPI, x86: Fix extended error log driver to depend on CONFIG_X86_LOCAL_APIC
  dmi: Avoid unaligned memory access in save_mem_devices()
  Move cper.c from drivers/acpi/apei to drivers/firmware/efi
  EDAC, GHES: Update ghes error record info
  ACPI, APEI, CPER: Cleanup CPER memory error output format
  ACPI, APEI, CPER: Enhance memory reporting capability
  ACPI, APEI, CPER: Add UEFI 2.4 support for memory error
  DMI: Parse memory device (type 17) in SMBIOS
  ACPI, x86: Extended error log driver for x86 platform
  bitops: Introduce a more generic BITMASK macro
  ACPI, CPER: Update cper info
  ACPI, APEI, CPER: Fix status check during error printing
2013-11-12 11:16:44 +09:00
Gu Zheng
3a41c5dbe8 fb: reorder the lock sequence to fix potential dead lock
Following commits:

50e244cc79 fb: rework locking to fix lock ordering on takeover
e93a9a8687 fb: Yet another band-aid for fixing lockdep mess
054430e773 fbcon: fix locking harder

reworked locking to fix related lock ordering on takeover, and introduced console_lock
into fbmem, but it seems that the new lock sequence(fb_info->lock ---> console_lock)
is against with the one in console_callback(console_lock ---> fb_info->lock), and leads to
a potential dead lock as following:

[  601.079000] ======================================================
[  601.079000] [ INFO: possible circular locking dependency detected ]
[  601.079000] 3.11.0  Not tainted
[  601.079000] -------------------------------------------------------
[  601.079000] kworker/0:3/619 is trying to acquire lock:
[  601.079000]  (&fb_info->lock){+.+.+.}, at: [<ffffffff81397566>] lock_fb_info+0x26/0x60
[  601.079000]
but task is already holding lock:
[  601.079000]  (console_lock){+.+.+.}, at: [<ffffffff8141aae3>] console_callback+0x13/0x160
[  601.079000]
which lock already depends on the new lock.

[  601.079000]
the existing dependency chain (in reverse order) is:
[  601.079000]
->  (console_lock){+.+.+.}:
[  601.079000]        [<ffffffff810dc971>] lock_acquire+0xa1/0x140
[  601.079000]        [<ffffffff810c6267>] console_lock+0x77/0x80
[  601.079000]        [<ffffffff81399448>] register_framebuffer+0x1d8/0x320
[  601.079000]        [<ffffffff81cfb4c8>] efifb_probe+0x408/0x48f
[  601.079000]        [<ffffffff8144a963>] platform_drv_probe+0x43/0x80
[  601.079000]        [<ffffffff8144853b>] driver_probe_device+0x8b/0x390
[  601.079000]        [<ffffffff814488eb>] __driver_attach+0xab/0xb0
[  601.079000]        [<ffffffff814463bd>] bus_for_each_dev+0x5d/0xa0
[  601.079000]        [<ffffffff81447e6e>] driver_attach+0x1e/0x20
[  601.079000]        [<ffffffff81447a07>] bus_add_driver+0x117/0x290
[  601.079000]        [<ffffffff81448fea>] driver_register+0x7a/0x170
[  601.079000]        [<ffffffff8144a10a>] __platform_driver_register+0x4a/0x50
[  601.079000]        [<ffffffff8144a12d>] platform_driver_probe+0x1d/0xb0
[  601.079000]        [<ffffffff81cfb0a1>] efifb_init+0x273/0x292
[  601.079000]        [<ffffffff81002132>] do_one_initcall+0x102/0x1c0
[  601.079000]        [<ffffffff81cb80a6>] kernel_init_freeable+0x15d/0x1ef
[  601.079000]        [<ffffffff8166d2de>] kernel_init+0xe/0xf0
[  601.079000]        [<ffffffff816914ec>] ret_from_fork+0x7c/0xb0
[  601.079000]
->  (&fb_info->lock){+.+.+.}:
[  601.079000]        [<ffffffff810dc1d8>] __lock_acquire+0x1e18/0x1f10
[  601.079000]        [<ffffffff810dc971>] lock_acquire+0xa1/0x140
[  601.079000]        [<ffffffff816835ca>] mutex_lock_nested+0x7a/0x3b0
[  601.079000]        [<ffffffff81397566>] lock_fb_info+0x26/0x60
[  601.079000]        [<ffffffff813a4aeb>] fbcon_blank+0x29b/0x2e0
[  601.079000]        [<ffffffff81418658>] do_blank_screen+0x1d8/0x280
[  601.079000]        [<ffffffff8141ab34>] console_callback+0x64/0x160
[  601.079000]        [<ffffffff8108d855>] process_one_work+0x1f5/0x540
[  601.079000]        [<ffffffff8108e04c>] worker_thread+0x11c/0x370
[  601.079000]        [<ffffffff81095fbd>] kthread+0xed/0x100
[  601.079000]        [<ffffffff816914ec>] ret_from_fork+0x7c/0xb0
[  601.079000]
other info that might help us debug this:

[  601.079000]  Possible unsafe locking scenario:

[  601.079000]        CPU0                    CPU1
[  601.079000]        ----                    ----
[  601.079000]   lock(console_lock);
[  601.079000]                                lock(&fb_info->lock);
[  601.079000]                                lock(console_lock);
[  601.079000]   lock(&fb_info->lock);
[  601.079000]
 *** DEADLOCK ***

so we reorder the lock sequence the same as it in console_callback() to
avoid this issue. And following Tomi's suggestion, fix these similar
issues all in fb subsystem.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-11 15:52:59 +02:00
Laurent Pinchart
deccd24f90 fbdev: shmobile-lcdcfb: Convert to clk_prepare/unprepare
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-11 15:33:15 +02:00
Laurent Pinchart
d00affb1c6 fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-11-11 15:32:58 +02:00
Linus Torvalds
78d4a42069 Merge branch 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc update from Helge Deller:
 - a bugfix for sticon (parisc text console driver) to not crash the
   64bit kernel on machines with more than 4GB RAM
 - added kernel audit support
 - made udelay() implementation SMP-safe
 - "make install" now does not depend on vmlinux
 - added defconfigs for 32- and 64-kernels

* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: add generic 32- and 64-bit defconfigs
  parisc: sticon - unbreak on 64bit kernel
  parisc: signal fixup - SIGBUS vs. SIGSEGV
  parisc: implement full version of access_ok()
  parisc: correctly display number of active CPUs
  parisc: do not count IPI calls twice
  parisc: make udelay() SMP-safe
  parisc: remove duplicate define
  parisc: make "make install" not depend on vmlinux
  parisc: add kernel audit feature
  parisc: provide macro to create exception table entries
2013-11-11 18:15:25 +09:00
Linus Torvalds
21604cdcdc ARM: SoC cleanups for 3.13
This branch contains code cleanups, moves and removals for 3.13.
 
 Qualcomm msm targets had a bunch of code removal for legacy non-DT
 platforms. Nomadik saw more device tree conversions and cleanup of old
 code. Tegra has some code refactoring, etc.
 
 One longish patch series from Sebastian Hasselbarth changes the init_time
 hooks and tries to use a generic implementation for most platforms,
 since they were all doing more or less the same things.
 
 Finally the "shark" platform is removed in this release. It's been
 abandoned for a while and nobody seems to care enough to keep it
 around. If someone comes along and wants to resurrect it, the removal
 can easily be reverted and code brought back.
 
 Beyond this, mostly a bunch of removals of stale content across the
 board, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgBqdAAoJEIwa5zzehBx3cIEP/0L8ayPZV/fFpF3VheP7nyq9
 nanUc74GVHu71rhiACsfqsP9QGQT6Ye+RNvD8gVcmmqW+7TjWG19nwgjO+GbJmIF
 Sr5jNaSLy2yeMHd6aEOTYtpQ/kUdFePvEVMVJG4nx8vVa0sxk7YCIsHFNQTV4Wgv
 FOnJ2jx3RvM6ing5SfmglB3ai7dwYxKKCZvzLqzn2vs0W+Fw0jXv/OEjbdd+WAfK
 K94lFIqQXcxyDeF2NTVtlFT/F+LKbiRP88kM2ZkJkz5RHcSXgJNmJmVDCHwGxH08
 ri9QOX6stHT6gNFl/B5ckpzg5PbuzkEnlg1GXWn7fnx7OoBKekx8SKoP0+sjkpxF
 kX5pfERdBHUju1mfHDkxfdPAQ4RFDVcYDwNoTC1zBhDSfMuFsTGGNdeR0dhGQnmA
 Vzc8RfIRzFhGEuXDktz7cZIpOuq7OI62jt6qDLqWSWSOa9ZfqsOMdCcA3QTV3rTi
 nHiOQBTM0Bl78SrXzE0PmcD4obCnBvJqthSF5Z09N/POBtz8i4GsF7k4S1rr/rvX
 HA/wp9Lzt4hvCoj1gwEGLqUnSiey1b7a3rqn03mNQvX7NW9StIg1VCauQZBR1KwP
 Xtxgt48QgjQ7wzh4RGs2FdAgW4cw9nEbUTVRBLkQ7jxW+zh5CRJlS5dprBMR7Ier
 7necO/DWPLnhaSAj4eXB
 =SHZQ
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This branch contains code cleanups, moves and removals for 3.13.

  Qualcomm msm targets had a bunch of code removal for legacy non-DT
  platforms.  Nomadik saw more device tree conversions and cleanup of
  old code.  Tegra has some code refactoring, etc.

  One longish patch series from Sebastian Hasselbarth changes the
  init_time hooks and tries to use a generic implementation for most
  platforms, since they were all doing more or less the same things.

  Finally the "shark" platform is removed in this release.  It's been
  abandoned for a while and nobody seems to care enough to keep it
  around.  If someone comes along and wants to resurrect it, the removal
  can easily be reverted and code brought back.

  Beyond this, mostly a bunch of removals of stale content across the
  board, etc"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (79 commits)
  ARM: gemini: convert to GENERIC_CLOCKEVENTS
  ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4, 5]_DT config options
  ARM: OMAP3: control: add API for setting IVA bootmode
  ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
  ARM: OMAP3: McBSP: do not access CM register directly
  ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
  MAINTAINERS: Add patterns for DTS files for AT91
  ARM: at91: remove init_machine() as default is suitable
  ARM: at91/dt: split sama5d3 peripheral definitions
  ARM: at91/dt: split sam9x5 peripheral definitions
  ARM: Remove temporary sched_clock.h header
  ARM: clps711x: Use linux/sched_clock.h
  MAINTAINERS: Add DTS files to patterns for Samsung platform
  ARM: EXYNOS: remove unnecessary header inclusions from exynos4/5 dt machine file
  ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order
  clk: nomadik: fix missing __init on nomadik_src_init
  ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
  ARM: S3C64XX: Kill CONFIG_PLAT_S3C64XX
  ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support
  ...
2013-11-11 16:42:43 +09:00
Dave Airlie
91915260ea Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c
2013-11-08 16:34:39 +10:00
Helge Deller
0219132fe7 parisc: sticon - unbreak on 64bit kernel
STI text console (sticon) was broken on 64bit machines with more than
4GB RAM and this lead in some cases to a kernel crash.

Since sticon uses the 32bit STI API it needs to keep pointers to memory
below 4GB. But on a 64bit kernel some memory regions (e.g. the kernel
stack) might be above 4GB which then may crash the kernel in the STI
functions.

Additionally sticon didn't selected the built-in framebuffer fonts by
default. This is now fixed.

On a side-note: Theoretically we could enhance the sticon driver to
use the 64bit STI API. But - beside the fact that some machines don't
provide a 64bit STI ROM - this would just add complexity.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 3.8+
2013-11-07 22:46:20 +01:00
Linus Torvalds
0324e74534 Driver Core / sysfs patches for 3.13-rc1
Here's the big driver core / sysfs update for 3.13-rc1.
 
 There's lots of dev_groups updates for different subsystems, as they all
 get slowly migrated over to the safe versions of the attribute groups
 (removing userspace races with the creation of the sysfs files.)  Also
 in here are some kobject updates, devres expansions, and the first round
 of Tejun's sysfs reworking to enable it to be used by other subsystems
 as a backend for an in-kernel filesystem.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlJ6xAMACgkQMUfUDdst+yk1kQCfcHXhfnrvFZ5J/mDP509IzhNS
 ddEAoLEWoivtBppNsgrWqXpD1vi4UMsE
 =JmVW
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core / sysfs patches from Greg KH:
 "Here's the big driver core / sysfs update for 3.13-rc1.

  There's lots of dev_groups updates for different subsystems, as they
  all get slowly migrated over to the safe versions of the attribute
  groups (removing userspace races with the creation of the sysfs
  files.) Also in here are some kobject updates, devres expansions, and
  the first round of Tejun's sysfs reworking to enable it to be used by
  other subsystems as a backend for an in-kernel filesystem.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (83 commits)
  sysfs: rename sysfs_assoc_lock and explain what it's about
  sysfs: use generic_file_llseek() for sysfs_file_operations
  sysfs: return correct error code on unimplemented mmap()
  mdio_bus: convert bus code to use dev_groups
  device: Make dev_WARN/dev_WARN_ONCE print device as well as driver name
  sysfs: separate out dup filename warning into a separate function
  sysfs: move sysfs_hash_and_remove() to fs/sysfs/dir.c
  sysfs: remove unused sysfs_get_dentry() prototype
  sysfs: honor bin_attr.attr.ignore_lockdep
  sysfs: merge sysfs_elem_bin_attr into sysfs_elem_attr
  devres: restore zeroing behavior of devres_alloc()
  sysfs: fix sysfs_write_file for bin file
  input: gameport: convert bus code to use dev_groups
  input: serio: remove bus usage of dev_attrs
  input: serio: use DEVICE_ATTR_RO()
  i2o: convert bus code to use dev_groups
  memstick: convert bus code to use dev_groups
  tifm: convert bus code to use dev_groups
  virtio: convert bus code to use dev_groups
  ipack: convert bus code to use dev_groups
  ...
2013-11-07 11:42:15 +09:00
Linus Torvalds
c287322c3a USB driver update for 3.13-rc1
Here's the big USB driver update for 3.13-rc1.
 
 It includes the usual xhci changes, EHCI updates to get the scheduling
 of USB transactions working better, and a raft of gadget and musb
 updates as well.
 
 All of this has been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlJ6xycACgkQMUfUDdst+ymO+gCgxXdQXSU23i9ykc2CKBemdEBH
 w6IAoKcokITcdN1IxxkfiMxOEld2hgZm
 =3kbb
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB driver update from Greg KH:
 "Here's the big USB driver update for 3.13-rc1.

  It includes the usual xhci changes, EHCI updates to get the scheduling
  of USB transactions working better, and a raft of gadget and musb
  updates as well.

  All of this has been in linux-next for a while with no reported
  issues"

* tag 'usb-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (305 commits)
  USB: Maintainers change for usb serial drivers
  usb: usbtest: support container id descriptor test
  usb: usbtest: support superspeed device capbility descriptor test
  usb: usbtest: support usb2 extension descriptor test
  usb: chipidea: only get vbus regulator for non-peripheral mode
  USB: ehci-atmel: add usb_clk for transition to CCF
  usb: cdc-wdm: ignore speed change notifications
  USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications
  usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macros
  printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages
  usb: usbtest: support bos descriptor test for usb 3.0
  USB: phy: samsung: Support multiple PHYs of same type
  usb: wusbcore: change WA_SEGS_MAX to a legal value
  usb: wusbcore: add a quirk for Alereon HWA device isoc behavior
  usb: wusbcore: combine multiple isoc frames in a single transfer request.
  usb: wusbcore: set the RPIPE wMaxPacketSize value correctly
  usb: chipidea: host: more enhancement when ci->hcd is NULL
  usb: ohci: remove ep93xx bus glue platform driver
  usb: usbtest: fix checkpatch warning as sizeof code style
  UWB: clean up attribute use by using ATTRIBUTE_GROUPS()
  ...
2013-11-07 09:19:48 +09:00
Russell King
e0a8ba2581 DMA-API: video: clcd: add dma_set_mask_and_coherent() call
The DMA API requires drivers to call the appropriate dma_set_mask()
functions before doing any DMA mapping.  Add this required call to
the AMBA PL08x driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-31 14:48:42 +00:00
Marek Belisko
8623ec220b omapdss: Add new panel driver for Topolly td028ttec1 LCD.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
[tomi.valkeinen@ti.com: made a few funcs static]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-31 12:30:36 +02:00
Thierry Reding
dee8268f8f drm/tegra: Move driver to DRM tree
In order to make subsystem-wide changes easier, move the Tegra DRM
driver back into the DRM tree.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:55:40 +01:00
Sachin Kamat
8900346d5c video: exynos_mipi_dsi: Unlock the mutex before returning
Mutex should be unlocked before returning. Fixes mutex lock-unlock
imbalance issue.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30 13:52:36 +02:00
Manish Badarkhe
fa3fd89f9d video: da8xx-fb: remove unwanted define
Remove unwanted define "WSI_TIMEOUT" present in code.

Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30 13:36:48 +02:00
Joe Perches
cf6ac4ce1b video: Remove unnecessary semicolons
These aren't necessary after switch, for, and if blocks.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30 13:34:52 +02:00
David Herrmann
9e210be68a simplefb: use write-combined remapping
Framebuffers shouldn't be cached and it is usually very uncommon to read
them. Therefore, use ioremap_wc() to get significant speed improvements on
systems which provide it. On all other systems it's aliased to
ioremap_nocache() which is also fine.

Reported-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Tested-by: Tom Gundersen <teg@jklm.no>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30 12:49:02 +02:00
David Herrmann
498f6d3660 simplefb: fix unmapping fb during destruction
Unfortunately, fbdev does not create its own "struct device" for
framebuffers. Instead, it attaches to the device of the parent layer. This
has the side-effect that devm_* managed resources are not cleaned up on
framebuffer-destruction but rather during destruction of the
parent-device. In case of fbdev this might be too late, though.
remove_conflicting_framebuffer() may remove fbdev devices but keep the
parent device as it is.

Therefore, we now use plain ioremap() and unmap the framebuffer in the
fb_destroy() callback. Note that we must not free the device here as this
might race with the parent-device removal. Instead, we rely on
unregister_framebuffer() as barrier and we're safe.

Reported-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-30 12:49:01 +02:00
Linus Torvalds
7314e613d5 Fix a few incorrectly checked [io_]remap_pfn_range() calls
Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that
really should use the vm_iomap_memory() helper.  This trivially converts
two of them to the helper, and comments about why the third one really
needs to continue to use remap_pfn_range(), and adds the missing size
check.

Reported-by: Nico Golde <nico@ngolde.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org.
2013-10-29 10:21:34 -07:00
Tomi Valkeinen
cc9fd77c08 OMAPDSS: connector-dvi: fix releasing i2c_adapter
i2c adapter is not released correctly on error paths. Fix this.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-29 13:36:17 +02:00
Tomi Valkeinen
477fed7029 OMAPDSS: DSI: fix perf measuring ifdefs
DSI performance measuring code is meant to be explicitly enabled at
compile time. At some point in time the perf code was changed to be
enabled if DEBUG is defined. This is not right, so this patch fixes it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-29 13:27:06 +02:00
Joe Perches
31b6780c15 framebuffer: Use fb_<level>
Neaten and shorten the code using the new fb_<level> macros.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-29 12:53:07 +02:00
James Bates
55aa42f2e6 efifb: prevent null-deref when iterating dmi_list
The dmi_list array is initialized using gnu designated initializers, and
therefore may contain fewer explicitly defined entries as there are
elements in it. This is because the enum above with M_xyz constants
contains more items than the designated initializer. Those elements not
explicitly initialized are implicitly set to 0.

Now efifb_setup() loops through all these array elements, and performs
a strcmp on each item. For non explicitly initialized elements this will
be a null pointer:

This patch swaps the check order in the if statement, thus checks first
whether dmi_list[i].base is null.

Signed-off-by: James Bates <james.h.bates@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-29 12:41:46 +02:00
Wei Yongjun
e8ddb0cfa1 fbdev: fix error return code in metronomefb_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-29 12:20:11 +02:00
Stephen Rothwell
33826d01d0 video: xilinxfb: Fix for "Use standard variable name convention"
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-29 10:49:40 +02:00
Olof Johansson
43d93947a5 Via Paul Walmsley <paul@pwsan.com>:
Move some of the OMAP2+ CM and System Control Module direct
 register accesses into CM- and System Control
 Module-specific "drivers" underneath arch/arm/mach-omap2/.  This
 is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
 drivers/.
 
 Basic test logs are available here:
 
 http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSZAZXAAoJEBvUPslcq6VzCWQQAKH4Rj0izwbbLkgBAeeaQz5K
 oJgPJ6UPLOJ2uLIUauCKUSR6+nktrCTfV8P+J4DhCc6OiGrKBXJhSETPgaTbWsNw
 Bd577pmuvXSfNFXUaLwCgkSmafJ1pi6d7kEx/7ZW3TziVE/aUxyeHkrMtWJHrjTP
 28tJVieOxLlO5iK06DfmGcCpLUBKJKtgGRo0h/oqMhLAaN5S8//lyVYgdsto7oCN
 /bes6OpuVVdKiSr78V4rCVtR5Lij5+lVrT8HDiw2BA0V3bYcI7+CVlWBPZ3mYkuy
 oAJDcn9whNyfWS+SsaTIjy6nHsgQkhEJnhrQW3k2skVZobRtWDv7U5LiTjsUhb3o
 pjyWD8zZ7jqrkgyLsai6dm1zsljMQXsIQwH5h++HdCRhtNOXd6bVQZy0KqkpLu0y
 Bhpt8/edh4Bdc305oB05/Y9Uxr7Gr8M377chVZx+JD3rxIDjRRyOJcRIhd27WZEf
 HSMLpO/ayUXWdDuTlKW0IEnImx3PrxT913cnjIY589FhfdahfGQoft4sWDeiQLAX
 +zVYZljeY+GxbUWO6aY4m2PfVN9p/Hwal58NZZgj59wq9iHUuJErK11X7rj+2vwN
 +20IS8sikz6Iym84iC0T+omUeFVY0Zo004DVvpPB+D1C2LpwdI1c6kTz4DYT1EBP
 pvs8Wihkk7xQxQn0rBGP
 =L37r
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Paul Walmsley <paul@pwsan.com> via Tony Lindgren:

Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/.  This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.

Basic test logs are available here:

http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/

* tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP3: control: add API for setting IVA bootmode
  ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
  ARM: OMAP3: McBSP: do not access CM register directly
  ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
  + Linux 3.12-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-28 14:39:03 -07:00
Thierry Reding
73d4e2b82b pwm-backlight: Remove unused variable
I forgot to remove this during earlier cleanup patches and only checked
various builds for errors, not warnings.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-22 09:37:05 +02:00
Huayi Li
1dea1fd092 pwm_backlight: avoid short blank screen while doing hibernation
Use SIMPLE_DEV_PM_OPS macro will initialize the member "freeze"
and "thaw" of pwm_backlight_pm_ops as below,
	.freeze = suspend_fn,
	.thaw = resume_fn,
then during the process of making hibernation snapshot, screen
will be blank at the moment of freezing, and then light at the
moment of thawing.
this is not the right user experience for suspending to disk.

so this patch drops freeze and thaw callback, make the LCD is
always lighting before the final shutdown.

Signed-off-by: Huayi Li <huayi.li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-22 09:26:12 +02:00
Chen, Gong
10ef6b0dff bitops: Introduce a more generic BITMASK macro
GENMASK is used to create a contiguous bitmask([hi:lo]). It is
implemented twice in current kernel. One is in EDAC driver, the other
is in SiS/XGI FB driver. Move it to a more generic place for other
usage.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-21 15:12:01 -07:00
Thierry Reding
e4bfeda968 pwm-backlight: Fix brightness adjustment
Split adjustment of the brightness (by changing the PWM duty cycle) from
the power on sequence. This fixes an issue where the brightness can no
longer be updated once the backlight has been enabled.

Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-18 10:50:46 +02:00
Roel Kluin
9b842a470a OMAPDSS: Fix de_level in videomode_to_omap_video_timings()
In videomode_to_omap_video_timings, de_level is always set to HIGH
regardless of what the vm->flags says. Fix this to set it to high or low
according to vm->flags.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
[tomi.valkeinen@ti.com: rewrote the desc]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-18 10:57:43 +03:00
Jingoo Han
8114fabc94 video: exynos_dp: Use the generic PHY driver
Use the generic PHY API to control the DP PHY.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16 13:48:09 -07:00
Jingoo Han
f9b1e013f1 video: exynos_dp: remove non-DT support for Exynos Display Port
Exynos Display Port can be used only for Exynos SoCs. In addition,
non-DT for EXYNOS SoCs is not supported from v3.11; thus, there is
no need to support non-DT for Exynos Display Port.

The 'include/video/exynos_dp.h' file has been used for non-DT
support and the content of file include/video/exynos_dp.h is moved
to drivers/video/exynos/exynos_dp_core.h. Thus, the 'exynos_dp.h'
file is removed. Also, 'struct exynos_dp_platdata' is removed,
because it is not used any more.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16 13:48:09 -07:00
Sylwester Nawrocki
7e0be9f9f7 video: exynos_mipi_dsim: Use the generic PHY driver
Use the generic PHY API instead of the platform callback
for the MIPI DSIM DPHY enable/reset control.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Donghwa Lee <dh09.lee@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16 13:48:08 -07:00
Mike Dunn
8f43e18e27 pwm-backlight: Allow for non-increasing brightness levels
Currently the driver assumes that the values specified in the
brightness-levels device tree property increase as they are parsed from
left to right.  But boards that invert the signal between the PWM output
and the backlight will need to specify decreasing brightness-levels.
This patch removes the assumption that the last element of the array is
the maximum value, and instead searches the array for the maximum value
and uses that in the duty cycle calculation.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-16 09:20:09 +02:00
Thierry Reding
22ceeee16e pwm-backlight: Add power supply support
Backlights require a power supply to work properly. This commit adds a
regulator to power up and power down the backlight.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-16 09:20:09 +02:00
Thierry Reding
8265b2e4e6 pwm-backlight: Use new enable_gpio field
Make use of the new enable_gpio field and allow it to be set from DT as
well. Now that all legacy users of platform data have been converted to
initialize this field to an invalid value, it is safe to use the field
from the driver.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-16 09:20:09 +02:00
Thierry Reding
97c3843711 pwm-backlight: Track enable state
Follow up patches will add support for more complex means of powering
the backlight on and off such as using a regulator. To prevent calls to
the regulator API from becoming unbalanced, keep track of the enabled
state internally.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-16 09:05:57 +02:00
Thierry Reding
62b744a87c pwm-backlight: Refactor backlight power on/off
In preparation for adding an optional regulator and enable GPIO to the
driver, split the power on and power off sequences into separate
functions to reduce code duplication at the multiple call sites.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-16 09:05:56 +02:00
Thierry Reding
668e63c670 pwm-backlight: Improve readability
Add more blank lines to increase readability. While at it, remove a
trailing blank line at the end of the file.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-16 09:05:56 +02:00
Aaron Lu
5915a3db0c backlight: introduce backlight_device_registered
Introduce a new API for modules to query if a specific type of backlight
device has been registered. This is useful for some backlight device
provider module (e.g. ACPI video) to know if a native control
interface(e.g. the interface created by i915) is available and then do
things accordingly (e.g. avoid registering its own on Win8 systems).

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-16 01:16:04 +02:00
Michal Simek
718b90ac4c video: xilinxfb: Simplify error path
devm_iounmap is called automatically that's why remove it from the code
dev_set_drvdata(dev, NULL) is called by generic code
after device_release or on probe failure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-11 08:56:54 +03:00
Michal Simek
5c128df747 video: xilinxfb: Use devm_kzalloc instead of kzalloc
Simplify driver probe and release function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-11 08:56:54 +03:00
Michal Simek
353846fb8b video: xilinxfb: Use standard variable name convention
s/op/pdev/ in xilinxfb_of_probe().
No functional chagnes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-11 08:56:54 +03:00
Rob Herring
5af5073004 drivers: clean-up prom.h implicit includes
Powerpc is a mess of implicit includes by prom.h. Add the necessary
explicit includes to drivers in preparation of prom.h cleanup.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
2013-10-09 20:04:04 -05:00
Gerd Hoffmann
9b5254b460 hyperv-fb: add blanking support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:52:50 +03:00
Gerd Hoffmann
7ad9684721 hyperv-fb: add pci stub
This patch adds a pci stub driver to hyper-fb.  The hyperv framebuffer
driver will bind to the pci device then, so linux kernel and userspace
know there is a proper kernel driver for the device active.  lspci shows
this for example:

[root@dhcp231 ~]# lspci -vs8
00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual
VGA (prog-if 00 [VGA controller])
        Flags: bus master, fast devsel, latency 0, IRQ 11
        Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
        Expansion ROM at <unassigned> [disabled]
        Kernel driver in use: hyperv_fb

Another effect is that the xorg vesa driver will not attach to the
device and thus the Xorg server will automatically use the fbdev
driver instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:52:24 +03:00
Richard Röjfors
7831b2ae4a OMAPDSS: HDMI: Correctly compare timings
There is currently a copy and paste error where the hdmi vsync timings are not
compared correctly, this patch fixes this.

Signed-off-by: Richard Röjfors <richard.rojfors@gmail.com>
[tomi.valkeinen@ti.com: fixed to apply on top of latest tree]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:41 +03:00
Archit Taneja
08d83e4e17 omapdss: HDMI: move common functions to a separate file
The OMAP4 HDMI encoder driver(hdmi4.c) contains timings tables, and helper
functions which can be used as is by the OMAP5/DRA7x encoder driver. Move these
to hdmi_common.c so that it's not replicated in the future.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:37 +03:00
Archit Taneja
c8a0d959b7 omapdss: OMAP4: HDMI: remove unnecessary edid macros
The hdmi4 driver has edid macros that aren't used at all. Remove them.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:33 +03:00
Archit Taneja
ef26958a0c omapdss: HDMI: Rename hdmi driver files to nicer names
Replace the ti_hdmi_4xxx* notation for OMAP4 HDMI driver with hdmi4. Rename
the hdmi.c encoder driver to hdmi4.c. Rename ti_hdmi.h to hdmi.h

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:30 +03:00
Archit Taneja
8696131fad omapdss: HDMI: add HDMI wrapper IRQ flags
Add flags for the interrupts present in HDMI wrapper block, these will be used
to configure HDMI_IRQENABLE_SET/CLEAR and HDMI_IRQSTATUS registers.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:27 +03:00
Archit Taneja
bdb8bfc652 omapdss: HDMI: Clean up the header files
Keep only OMAP4 HDMI core block related structs and enums in ti_hdmi_4xxx_ip.h,
move the rest to ti_hdmi.h. This holds all library specific data which will be
shared between OMAP4 and OMAP5/DRA7x HDMI encoder drivers.

Move the duplicate register read/write/wait_for_bit_change functions in the hdmi
library files to ti_hdmi.h

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:23 +03:00
Archit Taneja
275cfa1a9d omapdss: HDMI: remove hdmi_ip_data struct
The struct hdmi_ip_data contains information related to HDMI wrapper, PLL, PHY
and core sub-blocks. Now that each of these sub blocks has it's own struct,
hdmi_ip_data serves no purpose. The mutex lock in the struct was also never
used.

Remove this struct to make things cleaner.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:19 +03:00
Archit Taneja
425f02fdee omapdss: HDMI: Use OMAP4 HDMI core functions directly and remove hdmi_ip_ops
After removing wrapper, pll and phy funcs from ti_hdmi_4xxx_ip.c, we are left
with OMAP4 HDMI core functions. Use these directly in hdmi.c rather than using
hdmi_ip_ops. Rename the core functions with a 'hdmi4' suffix.

We used to have hdmi_ip_ops so that one could support HDMI within a TI SoC which
had a non-DSS display subsytem. This however never got put into use, and hence
these ops aren't useful any more.

The DT/hwmod information for hdmi doesn't split the address space according to
the required sub blocks. Keep the address offset and size information in the
driver for now. This will be removed when the driver gets the information
correctly from DT/hwmod.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:15 +03:00
Archit Taneja
5cac5aee18 omapdss: HDMI: create a PHY library
HDMI PHY is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the
existing functions from ti_hdmi_4xxx_ip.c to a separate file. These funcs are
called directly from the hdmi driver rather than hdmi_ip_ops function pointer
calls.

Add the PHY library function declarations to ti_hdmi.h. These will be shared
amongst the omap4/5 hdmi platform drivers. Remove the PHY function pointer ops
from the ti_hdmi_ip_ops struct.

The DT/hwmod information for hdmi doesn't split the address space according to
the required sub blocks. Keep the address offset and size information in the
driver for now. This will be removed when the driver gets the information
correctly from DT/hwmod.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:11 +03:00
Archit Taneja
c1577c1ea0 omapdss: HDMI: create a PLL library
HDMI PLL is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the
existing PLL functions from ti_hdmi_4xxx_ip.c and hdmi.c to a separate file.
These funcs are called directly from the hdmi driver rather than hdmi_ip_ops
function pointer calls.

Add the PLL library function declarations to ti_hdmi.h. These will be shared
amongst the omap4/5 hdmi platform drivers. Remove the PLL function pointer ops
from the ti_hdmi_ip_ops struct. These will be shared amongst the omap4/5 hdmi
platform drivers and other libraries.

The DT/hwmod information for hdmi doesn't split the address space according to
the required sub blocks. Keep the address offset and size information in the
driver for now. This will be removed when the driver gets the information
correctly from DT/hwmod.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:07 +03:00
Archit Taneja
f382d9eb82 omapdss: HDMI: create a Wrapper library
HDMI wrapper is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the
existing functions from ti_hdmi_4xxx_ip.c to a separate file. These funcs are
called directly from the hdmi driver rather than hdmi_ip_ops funtion pointer
calls.

Add new wrapper funcs which can be used by other hdmi libraries like core, pll
and phy. Move some of the enums, structs and funcs related to the wrapper from
ti_hdmi_4xxx_ip.h to ti_hdmi.h. These will be shared amongst the omap4/5 hdmi
platform drivers and other libraries.

The old hdmi_wp_init() is removed since it didn't do anything. Timing parameters
like interlace, hsync_level and vsync_level weren't copied correctly before.
Those are copied correctly now.

The DT/hwmod information for hdmi doesn't split the address space according to
the required sub blocks. Keep the address offset and size information in the
driver for now. This will be removed when the driver gets the information
correctly from DT/hwmod.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:42:03 +03:00
Tom Gundersen
9f192a9228 simplefb: print some info about the registered fb
This is similar to the output printed by efifb.

Signed-off-by: Tom Gundersen <teg@jklm.no>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:35:46 +03:00
Sachin Kamat
6c666b4188 video: wmt_ge_rops: Fix a trivial typo
Add a missing closing brace for email address.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:35:46 +03:00
Sachin Kamat
421ee4eafc video: wmt_ge_rops: Remove redundant of_match_ptr
The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:35:45 +03:00
Sachin Kamat
a17016f0a6 video: wm8505fb: Remove redundant of_match_ptr
The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Ed Spiridonov <edo.rus@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:35:45 +03:00
Sachin Kamat
d71f8cdfdb video: ssd1307fb: Remove redundant of_match_ptr
The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:35:44 +03:00
Michal Simek
c5136a033f video: amba-clcd: Remove unnecessary amba_set_drvdata()
Driver core clears the driver data to NULL after device_release
or on probe failure, so just remove it from here.

Driver core change:
"device-core: Ensure drvdata = NULL when no driver is bound"
(sha1: 0998d06310)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:35:44 +03:00
Sangjung Woo
4d26ec5ddf fbdev: sh_mobile_hdmi: Use devm_kzalloc()
Use devm_kzalloc() instead of kzalloc() in order to be free
automatically. This makes cleanup paths more simple.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-10-09 12:35:43 +03:00
Hanjun Guo
55be310892 Video / au1100fb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:10 +03:00
Hanjun Guo
d07b319143 Video / au1200fb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:09 +03:00
Hanjun Guo
fbc0156c8e Video / bf54x-lq043fb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:09 +03:00
Hanjun Guo
46fc95030d Video / broadsheetfb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:09 +03:00
Hanjun Guo
be75b5b535 Video / cobalt_lcdfb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:09 +03:00
Hanjun Guo
44f544f752 Video / da8xx-fb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:09 +03:00
Hanjun Guo
5fc89379da Video / jz4740_fb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:09 +03:00
Hanjun Guo
ae6b639dd8 Video / metronomefb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:09 +03:00
Hanjun Guo
688e6e22cd Video / bfin-t350mcqb-fb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:08 +03:00
Hanjun Guo
86bf043897 Video / hecubafb: Use module_platform_driver() to simplify code
Convert to module_platform_driver() to simplify code.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-30 10:51:08 +03:00
Greg Kroah-Hartman
88502b9c0a Merge 3.12-rc3 into driver-core-next
We want the driver core and sysfs fixes in here to make merges and
development easier.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-29 18:29:23 -07:00
Ricardo Neri
78145a95fb OMAPDSS: HDMI: OMAP4: Complete dumping of core registers
Add missing register entries when dumping the core.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:58:23 +03:00
Ricardo Neri
46c4a7551d OMAPDSS: HDMI: OMAP4: Complete register definitions for core
Add missing register definitions; mainly for colorspace conversion, video
timing and interrupt handling.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:58:22 +03:00
Ricardo Neri
190d57c950 OMAPDSS: HDMI: OMAP4: Rename the HDMI_CORE_CTRL1 register
Rename the register to be aligned with the HDMI_CORE_SYS naming convention.
Also, update the naming of the #defines used for its fields.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:58:22 +03:00
Ricardo Neri
8a768c8079 OMAPDSS: HDMI: OMAP4: Complete dumping of DPLL registers
Add the spread spectrum clock configuration registers to the DPLL dump.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:58:21 +03:00
Ricardo Neri
a798eb7ee8 OMAPDSS: HDMI: OMAP4: Complete register definitions for DPLL
Add missing register definitions for spread spectrum clocking.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:58:21 +03:00
Ricardo Neri
a7e71262af OMAPDSS: HDMI: OMAP4: Complete dumping of wrapper registers
Add missing registers when dumping the HDMI wrapper. Also, order the dump by
offset to improve readability.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:58:21 +03:00
Ricardo Neri
40e6237710 OMAPDSS: HDMI: OMAP4: Complete register definitions for wrapper
Add definitions for missing registers in the HDMI wrapper. Also, order
the registers by offset to improve readability.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:58:20 +03:00
Jean-Christophe PLAGNIOL-VILLARD
b985172b32 video: atmel_lcdfb: add device tree suport
get display timings from device tree
Use videomode helpers to get display timings and configurations from
device tree

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:26:20 +03:00
Jean-Christophe PLAGNIOL-VILLARD
ce3b64f5f1 video: atmel_lcdfb: pass the pdata as params
so we can use have list gpio as example (probe via DT)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:26:20 +03:00
Jean-Christophe PLAGNIOL-VILLARD
42110e91de video: atmel_lcdfb: introduce atmel_lcdfb_power_control
to simplify the check on the presence of the callback

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:26:19 +03:00
Jean-Christophe PLAGNIOL-VILLARD
8af2c2869f video: atmel_lcdfb: fix platform data struct
Today we mix pdata and drivers data in the struct atmel_lcdfb_info
Fix it and introduce a new struct atmel_lcdfb_pdata for platform data only

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-27 09:26:19 +03:00
Johan Hovold
9d3fde86b1 backlight: atmel-pwm-bl: fix deferred probe from __init
Move probe out of __init section and don't use platform_driver_probe
which cannot be used with deferred probing.

Since commit e9354576 ("gpiolib: Defer failed gpio requests by default")
this driver might return -EPROBE_DEFER if a gpio_request fails.

Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 16:18:33 -07:00
Marek Vasut
6d0bb81804 video: mxsfb: Add missing break
Add missing break into the restore function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 15:33:23 +03:00
Sachin Kamat
090fd59308 video: xilinxfb: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:27 +03:00
Sachin Kamat
3e3d2225ae video: tcx: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:26 +03:00
Sachin Kamat
cb643dfbbd video: sunxvr1000: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:26 +03:00
Sachin Kamat
cacb413617 video: platinumfb: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:25 +03:00
Sachin Kamat
391962f618 video: p9100: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:25 +03:00
Sachin Kamat
38710d409b video: ffb: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:24 +03:00
Sachin Kamat
d2b800c0c9 video: cg6: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:24 +03:00
Sachin Kamat
3d2ae2dc9e video: cg3: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:23 +03:00
Sachin Kamat
b3a4f58dbd video: cg14: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:23 +03:00
Sachin Kamat
5fb4baeab6 video: bw2: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:22 +03:00
Sachin Kamat
bc4626fc87 video: amifb: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:22 +03:00
Sachin Kamat
74a7b36259 video: mb862xx: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:09 +03:00
Sachin Kamat
064f29e00a video: leo: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:08 +03:00
Sachin Kamat
22b67c0ab2 video: grvga: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:49:07 +03:00
Sachin Kamat
a36bf19255 video: atmel_lcdfb: Remove redundant dev_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:48:49 +03:00
Lars-Peter Clausen
aeac9e3f89 video: jz4740-fb: Use clk_prepare_enable/clk_disable_unprepare
In preparation to switching the jz4740 clk driver to the common clk framework
update the clk enable/disable calls to clk_prepare_enable/clk_disable_unprepare.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:23:53 +03:00
Lars-Peter Clausen
8a519c437a video: jz4740-fb: Fix LCD_CMD bit definitions
Fix the bit offsets for the LCD_CMD definitions.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 13:23:53 +03:00
Joe Perches
224b93c5b1 framebuffer: arkfb: Fix framebugger typo
s/framebugger/framebuffer/

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 12:46:27 +03:00
Andrzej Hajda
60119a1d68 video: of: display_timing: correct display-timings node finding
of_get_display_timing(s) use of_find_node_by_name
to get child node, this is incorrect, of_get_child_by_name
should be used instead. The patch fixes it.
Small typo is also corrected.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 12:31:42 +03:00
Sachin Kamat
bb1d2da7db video: riva: Remove incorrect checks
'xoffset' and 'yoffset' are unsigned and hence cannot be less than 0.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:52:31 +03:00
Sachin Kamat
cd1979b670 video: aty: Remove incorrect checks
'xoffset' and 'yoffset' are unsigned and hence cannot be less than 0.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:52:31 +03:00
Sachin Kamat
8639fac5da video: cirrusfb: Remove incorrect checks
'xoffset' and 'yoffset' are unsigned and hence cannot be less than 0.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:52:31 +03:00
Sachin Kamat
1ca3bc11aa video: vfb: Remove incorrect check
'yoffset' is unsigned and hence cannot be less than 0.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:52:31 +03:00
Sachin Kamat
b1dfee60c8 video: uvesafb: Remove redundant NULL check
kfree on a NULL pointer is a no-op.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:50:08 +03:00
Sachin Kamat
a13afa4923 video: kyro: Remove redundant break
'break' after return statement is redundant. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:50:08 +03:00
Sachin Kamat
e72d649cf8 video: aty: Remove redundant break
'break' after return statement is redundant. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:50:08 +03:00
Sachin Kamat
58f3853af9 video: da8xx-fb: Staticize reg_context
'reg_context' is local to this file. Make it static.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:50:08 +03:00
Sachin Kamat
9aae307c6a video: smscufx: Use NULL instead of 0
'info' is a pointer. Use NULL instead of 0.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:50:08 +03:00
Sachin Kamat
ceeddb4e69 video: udlfb: Use NULL instead of 0
new_back is a pointer. Use NULL instead of 0.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:50:07 +03:00
Sachin Kamat
d24c815b74 backlight: tosa: Remove redundant spi_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:47:27 +03:00
Sachin Kamat
f767f7acee backlight: l4f00242t03: Remove redundant spi_set_drvdata
Driver core sets driver data to NULL upon failure or remove.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:47:14 +03:00
Wei Yongjun
8c42cf7549 neofb: fix error return code in neofb_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:45:16 +03:00
Wei Yongjun
a2a6fc5f18 s3fb: fix error return code in s3_pci_probe()
Fix to return -EINVAL when virtual vertical size smaller than real
instead of 0, as done elsewhere in this function. Also remove dup code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:45:15 +03:00
Uwe Kleine-König
fb8a15079a video: mmp: drop needless devm cleanup
The nice thing about devm_* is that the driver doesn't need to free the
resources but the driver core takes care about that. This also
simplifies the error path quite a bit and removes the wrong check for a
clock pointer being NULL.

Russell King - ARM Linux <linux@arm.linux.org.uk>:
"And this patch also fixes the above: disabling/unpreparing _after_ putting
the thing - which was quite silly... :)"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:41:24 +03:00
Mark Brown
633358e9ff OMAPDSS: Add missing dependency on backlight for DSI-CM panel drier
The DSI-CM driver uses the backlight class so needs to build depend on it.

Signed-off-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:38:10 +03:00
Linus Walleij
fc6ad619a5 video: drop code for ARCH_SHARK in cyber2000fb
The Cyber2000 frame buffer driver contains a block of code solely
for the Shark machine. As the machine is deleted, delete this
code as well.

Also remove the pointless #ifdef CONFIG_PCI as the Kconfig
clearly states PCI as a dependency anyway.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-25 15:25:24 +02:00
Peter Senna Tschudin
62a83183c4 OMAPDSS: DISPC: Fix assignment of 0/1 to bool variables
Convert 0 to false and 1 to true when assigning values to bool
variables. Inspired by commit 3db1cd5c05.

The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):

@@
bool b;
@@
(
-b = 0
+b = false
|
-b = 1
+b = true
)

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-23 10:34:30 +03:00
Jing Xiang
24586d8342 video: mmp: add pitch info in mmp_win structure
Add pitch length info of graphics/video layer, pitch is used
to represent line length in byte, the usage depends on pix_fmt.
If the fmt is YUV, the pitch[0] will be Y length,pitch[1]
will be U length, pitch[2] will be V lenth.
If the fmt is RGB, the picth[0] will be line lenth, and
pitch[1]/pitch[2] will be 0 and not be used.

Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Signed-off-by: Zhou Zhu <zzhu3@marvell.com>
Reviewed-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:52:33 +03:00
Jing Xiang
cc50bc5bb2 video: mmp: calculate pitch value when fb set win
Add new func mmpfb_set_win to make code clean, it will do resolution
and fmt setting of win in mmpfb_set_win.

Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Signed-off-by: Zhou Zhu <zzhu3@marvell.com>
Reviewed-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:52:33 +03:00
Guoqing Li
1f2e42c6c3 video: mmp: optimize some register setting code
There are dumplicate code of the smooth setting based on different
path, optimized the routine and use readl_relaxed instead.

Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Guoqing Li <ligq@marvell.com>
Signed-off-by: Zhou Zhu <zzhu3@marvell.com>
Reviewed-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:52:33 +03:00
Guoqing Li
9a27d5916b video: mmp: rb swap setting update for mmp display
We could set rb swap in two modules: DMA controler input part and
dsi interface output part.
DMA input part is based on pix_fmt to set rbswap, dsi output interface
part will set rbswap based on platform dsi_rbswap configuration.

This patch include below change and enhancement:

1) The input format which support rbswap is based on RGB format,
eg. RGB565 indicates the source data in memory is that Red is [15~11],
Green is [10~5], Blue is [4:0], Red is MSB, Blue is LSB, but for the
display dma input default setting(rbswap = 0), it only support Blue
is [15~11], Green is [10~5], Red is [4:0], Red is LSB, Blue is MSB,
so for this format(RGB565), display controller need to set rbswap
 = 1 and it can support the MSB/LSB correctly.
BGR/YUV format will not set it in mmp display driver.

2) The dsi output part of rbswap is depend on dsi_rbswap which is
defined in specific platfrom. For output dsi interface, it has this
feature to do rbswap again if it needs specifc byte sequence of RGB
byte for DSI panel.
eg. If display content is set RGB565 in memory and DMA input part set
rbswap in driver to support Red as MSB , Blue LSB, but dsi panel only
support Red as LSB, Blue as MSB, then it can use this feature.
If there is no this requirement of panel, this dsi output part is not
needed.

Signed-off-by: Guoqing Li <ligq@marvell.com>
Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Signed-off-by: Zhou Zhu <zzhu3@marvell.com>
Reviewed-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:52:32 +03:00
Jingoo Han
91f8628b7f video: w100fb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:23:22 +03:00
Jingoo Han
0442f762b0 video: tmiofb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:23:22 +03:00
Jingoo Han
129f1be4b9 video: simplefb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:23:21 +03:00
Jingoo Han
8b4c7e5da2 video: s3c-fb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:23:21 +03:00
Jingoo Han
772ee6daf1 video: s1d13xxxfb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:23:10 +03:00
Jingoo Han
3b2633fb1b video: mbxfb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:03 +03:00
Jingoo Han
1c8034c7f0 video: imxfb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:03 +03:00
Jingoo Han
e09f398e53 video: ep93xx-fb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:02 +03:00
Jingoo Han
700601d280 video: da8xx-fb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:02 +03:00
Jingoo Han
46d2db8245 video: amba-clcd: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:02 +03:00
Jingoo Han
ad86abd81e video: sh_mobile_hdmi: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:02 +03:00
Jingoo Han
50144243c2 video: sa1100fb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:02 +03:00
Jingoo Han
1df86cdaee video: s3c2410: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:02 +03:00
Jingoo Han
22313679b8 video: pxafb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:02 +03:00
Jingoo Han
006ac4d4f7 video: pxa168fb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:01 +03:00
Jingoo Han
dffb3b47ba video: omapfb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:01 +03:00
Jingoo Han
cd7c7f6c3c video: nuc900fb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:01 +03:00
Jingoo Han
521fdb7c4d video: mx3fb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:01 +03:00
Jingoo Han
a5d58be079 video: atmel_lcdfb: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Also, unnecessary casting from return value that is a void pointer
is removed.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:22:00 +03:00
Thierry Reding
42ddb453a0 radeon: Conditionally compile PM code
The power management code is only used on X86 and PowerMac. To prevent
the compiler from warning about unused code, only build when PM and one
of X86 or PowerMac is selected.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:14:26 +03:00
Sachin Kamat
350d72f0ed video: grvga: Use module_platform_driver
module_platform_driver removes some boilerplate code and makes
it simple.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-20 12:03:26 +03:00
Peter Huewe
93f571728f video/matrox/matroxfb_maven: Use module_i2c_driver to register driver
Removing some boilerplate by using module_i2c_driver instead of calling
register and unregister in the otherwise empty init/exit functions.
Also removed a useless comment as suggested by Jean Delvare.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:10 +03:00
Jingoo Han
fc0b01930e video: vt8623fb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:10 +03:00
Jingoo Han
e847307492 video: tridentfb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:10 +03:00
Jingoo Han
e09335a6fe video: tdfxfb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:10 +03:00
Jingoo Han
f9af73c6f6 video: sisfb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:09 +03:00
Jingoo Han
f1260e3ec4 video: savagefb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:09 +03:00
Jingoo Han
354b40c4a2 video: s3fb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:09 +03:00
Jingoo Han
76347609ae video: pm3fb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:09 +03:00
Jingoo Han
fe2cc23893 video: pm2fb: remove unnecessary pci_set_drvdata()
From 9e2c37ee1d5c2145fac113c483c9e6dd408f10fe Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Thu, 12 Sep 2013 15:11:07 +0900
Subject: [PATCH 14/21] video: pm2fb: remove unnecessary pci_set_drvdata()

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:09 +03:00
Jingoo Han
0ab49846c8 video: neofb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:09 +03:00
Jingoo Han
3a1300ef9e video: mb862xxfb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:08 +03:00
Jingoo Han
443e3fbcd0 video: kyrofb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:08 +03:00
Jingoo Han
07af229af6 video: intelfb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:07 +03:00
Jingoo Han
17a7a1989a video: i810fb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:07 +03:00
Jingoo Han
6a20807905 video: i740fb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:07 +03:00
Jingoo Han
44f75bfdbe video: gxfb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:07 +03:00
Jingoo Han
90def2c312 video: gx1fb: remove unnecessary pci_set_drvdata()
From fbb1885952efb15a46d03aac050c38fc9179594e Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Thu, 12 Sep 2013 14:42:45 +0900
Subject: [PATCH 06/21] video: gx1fb: remove unnecessary pci_set_drvdata()

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:07 +03:00
Jingoo Han
72411db379 video: lxfb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:06 +03:00
Jingoo Han
1df6af41bd video: cyber2000fb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:06 +03:00
Jingoo Han
d5ddbb00b8 video: cirrusfb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:06 +03:00
Jingoo Han
4a70324640 video: carminefb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:06 +03:00
Jingoo Han
8e6947764f video: arkfb: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:06 +03:00
Jon Mason
65122f7e80 radeonfb: Use pci_dev pm_cap
Use the already existing pm_cap variable in struct pci_dev for
determining the power management offset.  This saves the driver from
having to keep track of an extra variable.  Also, use the pci_power_t
value instead of always using the raw value for PCI_D2.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:06 +03:00
Jon Mason
8d0c03dd2d aty128fb: Use pci_dev pm_cap
Use the already existing pm_cap variable in struct pci_dev for
determining the power management offset.  This saves the driver from
having to keep track of an extra variable.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:05 +03:00
Jingoo Han
5a7bbe86b0 video: au1100fb: Remove casting the return value which is a void pointer
Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:30:05 +03:00
Tomi Valkeinen
48664b21ae OMAPDSS: DISPC: set irq_safe for runtime PM
We have a bug with omapdrm, where omapdrm calls dispc's pm_runtime
function in atomic context, and dispc's pm_runtime is not marked as
irq_safe:

BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952

Dispc's runtime PM callbacks are irq safe, so we can just set the
irq_safe flag to fix the issue.

However, in the long term, I'd rather have omapdrm manage the runtime PM
calls in a better way. Calling get/put for every small operation that
touches the dispc registers is very inefficient. It'd be better and
cleaner to have clear "in-use" and "not-in-use" states for dispc, so
that we don't need to do register context restore for small operations,
only to turn dispc off right afterwards.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:29:40 +03:00
Sathya Prakash M R
0fd9560257 OMAPDSS: Return right error during connector probe
While using HDMI connector driver with sil9022 encoder
came across issue where connector driver is probed first.
This resulted in error. A deffered probe solved this.
Most connector drivers need a encoder driver as their
video source. This patch ensures we do a probe defferal
if video source is not present for connector drivers.

Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-19 13:29:35 +03:00
Linus Torvalds
d5d04bb48f Bye, bye, WfW flag
This reverts the Linux for Workgroups thing.  And no, before somebody
asks, we're not doing Linux95.  Not for a few years, at least.

Sure, the flag added some color to the logo, and could have remained as
a testament to my leet gimp skills.  But no.  And I'll do this early, to
avoid the chance of forgetting when I'm doing the actual rc1 release on
the road.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 19:55:12 -07:00
Paul Bolle
ffd29195ed drivers/video/acornfb.c: remove dead code
acornfb checks for HAS_VIDC while support for that macro was removed in
v2.6.23 (when the arm26 port was removed).  So we can remove a bit of
dead code.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:56:22 -07:00
Vladimir Murzin
88c2d0b6fa fbdev/ps3fb: Fix section mismatch warning for ps3fb_probe
While cross-building for PPC64 I've got

WARNING: drivers/video/built-in.o(.text+0x9f9ca): Section mismatch in
reference from the function .ps3fb_probe() to th e variable
.init.data:ps3fb_fix The function .ps3fb_probe() references the
variable __initdata ps3fb_fix.  This is often because .ps3fb_probe
lacks a __initdata annotation or the annotation of ps3fb_fix is wrong.

WARNING: drivers/video/built-in.o(.text+0x9f9d2): Section mismatch in
reference from the function .ps3fb_probe() to the variable
.init.data:ps3fb_fix The function .ps3fb_probe() references the
variable __initdata ps3fb_fix.  This is often because .ps3fb_probe
lacks a __initdata annotation or the annotation of ps3fb_fix is wrong.

WARNING: drivers/built-in.o(.text+0xe222a): Section mismatch in
reference from the function .ps3fb_probe() to the variable
.init.data:ps3fb_fix The function .ps3fb_probe() references the
variable __initdata ps3fb_fix.  This is often because .ps3fb_probe
lacks a __initdata annotation or the annotation of ps3fb_fix is wrong.

WARNING: drivers/built-in.o(.text+0xe2232): Section mismatch in
reference from the function .ps3fb_probe() to the variable
.init.data:ps3fb_fix The function .ps3fb_probe() references the
variable __initdata ps3fb_fix.  This is often because .ps3fb_probe
lacks a __initdata annotation or the annotation of ps3fb_fix is wrong.

WARNING: vmlinux.o(.text+0x561d4a): Section mismatch in reference from
the function .ps3fb_probe() to the variable .init.data:ps3fb_fix The
function .ps3fb_probe() references the variable __initdata ps3fb_fix.
This is often because .ps3fb_probe lacks a __initdata annotation or
the annotation of ps3fb_fix is wrong.

Mismatch was introduced with 48c68c4f "Drivers: video: remove __dev*
attributes."

Remove __init data annotation from ps3fb_fix.

Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-11 11:39:39 +10:00
Linus Torvalds
44598f98b9 ARM: SoC board updates for 3.12
Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches,
 but most of this is around legacy code and board support. We've found that
 platform maintainers have a hard time separating all of these out and might
 move towards fewer branches for next release.
 
 - Removal of a number of Marvell Kirkwood board files, since contents
   is now common and mostly configured via DT.
 - Device-tree updates for Marvell Dove, including irqchip and clocksource
   setup.
 - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager.
 - New backlight drivers for backlights used on Renesas shmobile platforms.
 - Removal of Renesas leds driver.
 - Shuffling of some of the new Broadcom platforms to give room for others in
   the same mach directory. More in 2.13.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhrfAAoJEIwa5zzehBx3OOAQAJCWhoYaHvWmyAf+xCOQNpX2
 YgAngENW04VpHFOyn6BtoGv6+5JypdB2TmK3GHHlVJd1Im5mD1wgm8hAfgyV8lQ4
 UeJULdA2HZAstKeTirO65BIyUb5QIrWakF24ccfIfg2xeScM8FV0m8cmzeo3fYAf
 DmmeoSCmvTdu/cDWBNlsQZ/as8qCQwyF+5kZg+SMl1btA1Publu2I5lDE02TH46d
 sc5mN+ihw0JG62EJV7pov6uVyeFLExoTbrNfQZ4rixmKkMDS/jq5ZbBS5c0i8ULF
 s1UMSZtYTcUO9rAPv3+MOIc7fq7nKo9lLuwMrA1HHUEDJ2BEi8DIp99F+ZYm/MSL
 WpVxYNwOobPcMJBYGR2fy4GgpIyWB285GgrBUxcq7t0Xi4uBbptwjLhDE4d7LREV
 8guW251R+OEVPYcwFctsubnox0MViyC3CQ1FaAAdtTjpSKomlhk/yaxaQ9nGrxls
 QCZgXHWm4Ir3QYv8XfOn0X9vdP81EnX11SiwtrRSJ71QMs814nB8NdPDqU4VHsw8
 exKmqjq/Lt+F9Kpxn/FevNNuYOdefZNQi00yl3ERchdIGdvRwE/0yA0D69mpwIVr
 E41UwvH3g43vazCo2PMdWPWuFlpGMR3iZ4pXnDLH/w33ppfJWfokYwKSRQ/mu/MN
 LMjkwoZn1X+fZzNSh9/G
 =EGua
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
 "Board updates for 3.12.  Again, a bit of domain overlap with SoC and
  DT branches, but most of this is around legacy code and board support.
  We've found that platform maintainers have a hard time separating all
  of these out and might move towards fewer branches for next release.

   - Removal of a number of Marvell Kirkwood board files, since contents
     is now common and mostly configured via DT.
   - Device-tree updates for Marvell Dove, including irqchip and
     clocksource setup.
   - Defconfig updates.  Gotta go somewhere.  One new one for Renesas
     Lager.
   - New backlight drivers for backlights used on Renesas shmobile
     platforms.
   - Removal of Renesas leds driver.
   - Shuffling of some of the new Broadcom platforms to give room for
     others in the same mach directory.  More in 3.13"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
  mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
  ARM: bcm: Make secure API call optional
  ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers)
  ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
  ARM: bcm: Rename board_bcm
  mmc: sdhci-bcm-kona: make linker-section warning go away
  ARM: tegra: defconfig updates
  ARM: dove: add initial DT file for Globalscale D2Plug
  ARM: dove: add GPIO IR receiver node to SolidRun CuBox
  ARM: dove: add common pinmux functions to DT
  ARM: dove: add cpu device tree node
  ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
  arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument
  ARM: kirkwood: fix DT building and update defconfig
  ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
  ARM: configs: disable DEBUG_LL in bcm_defconfig
  ARM: bcm281xx: Board specific reboot code
  ARM bcm281xx: Turn on socket & network support.
  ARM: bcm281xx: Turn on L2 cache.
  ...
2013-09-06 13:34:43 -07:00
Linus Torvalds
8e73e367f7 ARM: SoC cleanups for 3.12
This branch contains code cleanups, moves and removals for 3.12.
 
 There's a large number of various cleanups, and a nice net removal of
 13500 lines of code.
 
 Highlights worth mentioning are:
 
 - A series of patches from Stephen Boyd removing the ARM local timer API.
 - Move of Qualcomm MSM IOMMU code to drivers/iommu.
 - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver
   and switching over to the drivers/pwm one.
 - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM).
 
 There's also a move of a header file out of include/linux/i2c/ to
 platform_data, where it really belongs. It touches mostly ARM platform
 code for include changes so we took it through our tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKg/NAAoJEIwa5zzehBx3vxIP/19ouV4WrzOeEMz2Id8bYT5/
 Tu9HRm+PJJ2O+4P+DYlycRAEHsbuDbwgdcqToH3quca1YnIcoJgY0FA6D0ihQ5uE
 EvTgFIpkNMLnR43GYDOE3a/rR3hYPg5oQabKFn7ZGLG2ND3D3d2N05WT8XNbTYDk
 nvCXvyRRT1ynCEzbxRBiE8x62ao4bqa5dZ1zrHHIEoakqciXEng8IU0nxx7SUarv
 61GBJHVoGFpwOWXdgt2uxyXFbn6nMrhf33ynB+RRAZhqlrC8FROj8Iz+3EoKSAHc
 fMJSw6jgdjMCfTDvi0j/eemoNC4fm0eP17Dz9WcwxtIrJPNFVrxZq+biDnpb49nM
 IHsbNrILosw9AbHr3C0kTU9tp+Jie2cE1RWHqTIN3S3zb4qN+fIJiU6o6LMhsNP5
 +ZxL4M5IYmvZYbU3a+A00TPwVRqBbsZB+et9RtYZsdpepovDiN4XcixEoT7ffqrt
 VLjJyoX7Aqmds46lMdsdD3bpPkREmMdf8aMm5fvdIqwbJi1pFMMGMdTgN2WLG5aM
 r0bj/DizxL7Brs8RHwOScUgXteZs3gg87v5Ns/3zAyJZvE4norPAiT+EJeXylpRO
 LDqqaypFs75nU+mWLNo8Fzck4Xue55SBqx5Bo3aD/Smk8B6r4KMqnMKVsV5RFHAU
 XfWb49HulUwHHdn5DAPx
 =1vE4
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This branch contains code cleanups, moves and removals for 3.12.

  There's a large number of various cleanups, and a nice net removal of
  13500 lines of code.

  Highlights worth mentioning are:

   - A series of patches from Stephen Boyd removing the ARM local timer
     API.
   - Move of Qualcomm MSM IOMMU code to drivers/iommu.
   - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM
     driver and switching over to the drivers/pwm one.
   - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM).

  There's also a move of a header file out of include/linux/i2c/ to
  platform_data, where it really belongs.  It touches mostly ARM
  platform code for include changes so we took it through our tree"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK
  gpio: (gpio-pca953x) move header to linux/platform_data/
  arm: zynq: hotplug: Remove unreachable code
  ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*()
  tegra: simplify use of devm_ioremap_resource
  ARM: SAMSUNG: Remove plat/regs-timer.h header
  ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
  ARM: SAMSUNG: Remove pwm-clock infrastructure
  ARM: SAMSUNG: Remove old PWM timer platform devices
  pwm: Remove superseded pwm-samsung-legacy driver
  ARM: SAMSUNG: Modify board files to use new PWM platform device
  ARM: SAMSUNG: Rework private data handling in dev-backlight
  pwm: Add new pwm-samsung driver
  ARM: mach-mvebu: remove redundant DT parsing and validation
  ARM: msm: Only compile io.c on platforms that use it
  iommu/msm: Move mach includes to iommu directory
  ARM: msm: Remove devices-iommu.c
  ARM: msm: Move mach/board.h contents to common.h
  ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE
  ARM: msm: Remove TMR and TMR0 static mappings
  ...
2013-09-06 13:21:16 -07:00
Linus Torvalds
a09e9a7a4b Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm tree changes from Dave Airlie:
 "This is the main drm pull request, I have some overlap with sound and
  arm-soc, the sound patch is acked and may conflict based on -next
  reports but should be a trivial fixup, which I'll leave to you!

  Highlights:

   - new drivers:

     MSM driver from Rob Clark

   - non-drm:

     switcheroo and hdmi audio driver support for secondary GPU
     poweroff, so drivers can use runtime PM to poweroff the GPUs.  This
     can save 5 or 6W on some optimus laptops.

   - drm core:

     combined GEM and TTM VMA manager
     per-filp mmap permission tracking
     initial rendernode support (via a runtime enable for now, until we get api stable),
     remove old proc support,
     lots of cleanups of legacy code
     hdmi vendor infoframes and 4k modes
     lots of gem/prime locking and races fixes
     async pageflip scaffolding
     drm bridge objects

   - i915:

     Haswell PC8+ support and eLLC support, HDMI 4K support, initial
     per-process VMA pieces, watermark reworks, convert to generic hdmi
     infoframes, encoder reworking, fastboot support,

   - radeon:

     CIK PM support, remove 3d blit code in favour of DMA engines,
     Berlin GPU support, HDMI audio fixes

   - nouveau:

     secondary GPU power down support for optimus laptops, lots of
     fixes, use MSI, VP3 engine support

   - exynos:

     runtime pm support for g2d, DT support, remove non-DT,

   - tda998x i2c driver:

     lots of fixes for sync issues

   - gma500:

     lots of cleanups

   - rcar:

     add LVDS support, fbdev emulation,

   - tegra:

     just minor fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (684 commits)
  drm/exynos: Fix build error with exynos_drm_connector.c
  drm/exynos: Remove non-DT support in exynos_drm_fimd
  drm/exynos: Remove non-DT support in exynos_hdmi
  drm/exynos: Remove non-DT support in exynos_drm_g2d
  drm/exynos: Remove non-DT support in exynos_hdmiphy
  drm/exynos: Remove non-DT support in exynos_ddc
  drm/exynos: Make Exynos DRM drivers depend on OF
  drm/exynos: Consider fallback option to allocation fail
  drm/exynos: fimd: move platform data parsing to separate function
  drm/exynos: fimd: get signal polarities from device tree
  drm/exynos: fimd: replace struct fb_videomode with videomode
  drm/exynos: check a pixel format to a particular window layer
  drm/exynos: fix fimd pixel format setting
  drm/exynos: Add NULL pointer check
  drm/exynos: Remove redundant error messages
  drm/exynos: Add missing of.h header include
  drm/exynos: Remove redundant NULL check in exynos_drm_buf
  drm/exynos: add device tree support for rotator
  drm/exynos: Add missing includes
  drm/exynos: add runtime pm interfaces to g2d driver
  ...
2013-09-05 10:17:26 -07:00
Linus Torvalds
9ab073bc45 fbdev changes for 3.12:
* Improvements to da8xx-fb to make it support v2 of the LCDC IP, used e.g. in
   BeagleBone
 * Himax HX8369 controller support
 * Various small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKB9vAAoJEPo9qoy8lh71dqkP/AgEljWrEKumJ6KQYLjxGEQM
 RseTYKaNE78TkPX5p4DcA2rJ0Ud/yK/swelZvHfnq+6yTxUiuwsHDAPcgrMf27NM
 yWWTW0gJRrs7jbHF7sIQkPbww56Irjz7uzUfOoNRqajgf51+mB3olAhTUn9tE3Pf
 PW9u5M5b904VnT0VKASEUB9SUtx5izWKP9Yyy7QG8WF++zp4BHfmO7+8kx46cE0l
 WFAQL7JrvtzI2yVcnnkfDRpmHOunbupIGOAT79s3KlK226SHNRi3wd6w6zDTudjj
 sEMJLDpipKYliT+yzwgHmuHfDTi+gx6a36bTMf9lXp+KZKYEjNlWnYKKHdkdtk7Z
 nYlUagu+8tOUsZGy5dOyMkbeYMMfpcBlN1VjMDBIs1kPc0psg15wPznLdnPa5rau
 Ag0Z7GPHvy8ucFBsfqp1Sgsi1QMSqWgkcCh55BAMID58A7ELPhHz9NpaFt9KGMEy
 EKoNPQmTjIosgEQDdbayqjBwBqK1O0Q8MPPFGiDCwX37XppgZ4mflSz3NfDpwN+J
 +J+C3y2Bn2qzYPUzy3vOoohoWvtxsGnteNyX3D/Yrk7I4/4IWdI0maTVMv9yq//D
 /uBt+OxEY0ODkfC+yhhKT6P5zNBqsoWa16fqDdx3WDV7xoCsVq6dKkhaQd/zEr0Z
 Yjtcw3ZRyGLQgX75Zo+B
 =Kr2i
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev changes from Tomi Valkeinen:
 - Improvements to da8xx-fb to make it support v2 of the LCDC IP, used
   eg in BeagleBone
 - Himax HX8369 controller support
 - Various small fixes and cleanups

* tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits)
  video: da8xx-fb: fix the polarities of the hsync/vsync pulse
  video: da8xx-fb: support lcdc v2 timing register expansion
  video: da8xx-fb: fixing timing off by one errors
  video: da8xx-fb fixing incorrect porch mappings
  video: xilinxfb: replace devm_request_and_ioremap by devm_ioremap_resource
  fbmem: move EXPORT_SYMBOL annotation next to symbol declarations
  drivers: video: fbcmap: remove the redundency and incorrect checkings
  video: mxsfb: simplify use of devm_ioremap_resource
  Release efifb's colormap in efifb_destroy()
  at91/avr32/atmel_lcdfb: prepare clk before calling enable
  video: exynos: Ensure definitions match prototypes
  OMAPDSS: fix WARN_ON in 'alpha_blending_enabled' sysfs file
  OMAPDSS: HDMI: Fix possible NULL reference
  video: da8xx-fb: adding am33xx as dependency
  video: da8xx-fb: let compiler decide what to inline
  video: da8xx-fb: make clock naming consistent
  video: da8xx-fb: set upstream clock rate (if reqd)
  video: da8xx-fb: reorganize panel detection
  video: da8xx-fb: ensure non-null cfg in pdata
  video: da8xx-fb: use devres
  ...
2013-09-05 09:49:32 -07:00
Linus Torvalds
eced5a0a5a OMAP specific fbdev changes for 3.12:
* Change the OMAP board files to use the new OMAP display drivers
 * Remove all the old drivers, and the related auxiliary code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKCBzAAoJEPo9qoy8lh71yy4QAIONKG1wqN93oGqhWlcSHWIe
 Lg9YIqYk7FDfroTVunGtm0nImJmJ9yEVkxAXBRJbVb5gwvlWhpUIrhc6OahksXP8
 rVxuwb+U9LdwWkskamv0UsstvIMMSPgtsuvAKeBaBz9jm0Yu+TbrZvnCv0AyKlKE
 IscOlDycG9ENbUrhIzu9utPNlvE03hqqgn8RVYvjoj4hQ8BmOBSOGGfuofbITJAS
 8wY4nAoRwU+rV3dWQgNAvFyQ/dvsnZ4nYNLJhnf6eaB9HzpfdtFUrOF/rAlJU8nG
 RrMt5oykQT9a6VKxNryoFqih2q+FPrXBARVDvGWxn6w+q2RHrw5eteGcemegzTga
 OSGyhLpGbT/5cvbQtfaHX/Rcrdy9CNj1FMy6Y/xMvkHeqiy+0Eo6l+Nh70cvHzrx
 b+vonkSornngymt6QSXyQwXkP1PbO9ZEsZbeK+wjrqrRKL5KRvQ/HGz3uYv7CiMX
 A6Q51RHDCDoelVAn9JORIEDQukh3R78XNwPbrjdRB1pNE3Z51rmSpolKsQbmPF9m
 073p4wQ91qOji4eIdxPhuN7NuAexs42iAIZNQnZ2gMFWWSwHLlNinaY2Uu+Fs2it
 wLyKabqvi1AeFHcARzYDuHzVPrRb+6exHokud6998M9zEvFAGCoKFcsxoEvvL5/u
 gwRjFHmMzz4caPVct0UU
 =Hj7U
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull OMAP specific fbdev changes from Tomi Valkeinen:
 "I've got this pull request separate from the main fbdev pull request,
  as this contains a bunch of OMAP board file changes and thus could
  possibly be rejected in case of bad conflicts.

  The removal of the old display drivers depend on the board file
  changes, so Tony Lindgren suggested taking them together via fbdev
  tree.  These are in linux-next, and also Tony didn't see any conflicts
  with any of the branches he had, so they should go in clean.

   - Change the OMAP board files to use the new OMAP display drivers

   - Remove all the old drivers, and the related auxiliary code"

* tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits)
  OMAPDSS: rename omap_dss_device's 'device' field to 'dst'
  OMAPDSS: rename omap_dss_device's 'output' to 'src'
  OMAPDSS: DSS: remove legacy dss bus support
  OMAPDSS: RFBI: remove code related to old panel model
  OMAPDSS: VENC: remove code related to old panel model
  OMAPDSS: SDI: remove code related to old panel model
  OMAPDSS: DSI: remove code related to old panel model
  OMAPDSS: HDMI: remove code related to old panel model
  OMAPDSS: DPI: remove code related to old panel model
  OMAPDSS: remove all old panel drivers
  OMAPDSS: DPI: change regulator handling
  OMAPDSS: SDI: change regulator handling
  OMAPDSS: fix DPI and SDI device ids
  OMAPDSS: remove omap_dss_device->channel field
  OMAPDSS: RFBI: Mark RFBI as broken
  ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig
  ARM: OMAP: AM3517EVM: use new display drivers
  ARM: OMAP: Zoom: use new display drivers
  ARM: OMAP: Pandora: use new display drivers
  ARM: OMAP: OMAP3EVM: use new display drivers
  ...
2013-09-05 09:44:03 -07:00
Linus Torvalds
27703bb4a6 PTR_RET() is a weird name, and led to some confusing usage. We ended
up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.
 
 This has been sitting in linux-next for a whole cycle.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJo+1AAoJENkgDmzRrbjxIC4QALJK95o8AUXuwUkl+2fmFkUt
 hh2/PJ1vDYgk4Xt0J6hyoK7XMa0H1RkbBrROuDdsBnorMFpEsGcgdkUZte9ufoAS
 97Bg+7N0KPbTB/S8vOwtW1vbERTJIVPN2uf6h1Wqm9Xc2puCh3HbMMr1AWMGu0WQ
 NqY5+Zz8zecy1UOrMhEP6H1CjeQcL1w1DO6YM5ydeqlKNzAz+JMfDXriLPDwiE7+
 XFPDF/O3Vtd2ckA7L70Lio7hfHwxV5U4WwFVfiwls98XB4jcZqDKIoh1r8z4SRgR
 +0Rae2DN3BaOabGMr//5XdrzQVpwJTh5m2w8BAOHJvCJ9HR7Sq29UIN4u+TowZBy
 L2xYo4dvFxkympwu5zEd3c7vHYWKIaqmSq5PIjr4gF/uIo2OeOTrpPIK782ZEYb7
 e+qUgOEM05V9AmQZCrSZeP9u474Sj8ow3sCtWxfdRtwNfoEIcUXsNNJd/zDHlVtW
 cEtXqc2xXIpcuUJQWlSaGp8fmRQjVZPzrLKYLM2m39ZcOOJbf5rzQAYS7hHPosIa
 SK+YVux/+Zzi+Xo/vXq1OlM/SruCr5S7JOgCxLowoQ88vupgXME6uPyC8EO+QQ50
 GsrHes5ZNLbk0uVsfcexIyojkUnyvDmmnDpv+1zdC6RgZLJQn8OXp5yNhHhnhrFT
 BiHX6YFWtDDqRlVv8Q0F
 =LeaW
 -----END PGP SIGNATURE-----

Merge tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull PTR_RET() removal patches from Rusty Russell:
 "PTR_RET() is a weird name, and led to some confusing usage.  We ended
  up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.

  This has been sitting in linux-next for a whole cycle"

[ There are still some PTR_RET users scattered about, with some of them
  possibly being new, but most of them existing in Rusty's tree too.  We
  have that

      #define PTR_RET(p) PTR_ERR_OR_ZERO(p)

  thing in <linux/err.h>, so they continue to work for now  - Linus ]

* tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO
  Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO
  drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO
  sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO
  dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO
  drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO
  mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR().
  staging/zcache: don't use PTR_RET().
  remoteproc: don't use PTR_RET().
  pinctrl: don't use PTR_RET().
  acpi: Replace weird use of PTR_RET.
  s390: Replace weird use of PTR_RET.
  PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.
  PTR_RET is now PTR_ERR_OR_ZERO
2013-09-04 17:31:11 -07:00
Linus Torvalds
228abe73ad Merge branch 'x86-fb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fb changes from Ingo Molnar:
 "This tree includes preparatory patches for SimpleDRM driver support,
  by David Herrmann.  They clean up x86 framebuffer support by creating
  simplefb devices wherever possible.  More background can be found at

     http://lwn.net/Articles/558104/"

* 'x86-fb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fbdev: fbcon: select VT_HW_CONSOLE_BINDING
  fbdev: efifb: bind to efi-framebuffer
  fbdev: vesafb: bind to platform-framebuffer device
  fbdev: simplefb: add common x86 RGB formats
  x86: sysfb: move EFI quirks from efifb to sysfb
  x86: provide platform-devices for boot-framebuffers
  fbdev: simplefb: mark as fw and allocate apertures
  fbdev: simplefb: add init through platform_data
2013-09-04 09:12:17 -07:00
Linus Torvalds
542a086ac7 Driver core patches for 3.12-rc1
Here's the big driver core pull request for 3.12-rc1.
 
 Lots of tiny changes here fixing up the way sysfs attributes are
 created, to try to make drivers simpler, and fix a whole class race
 conditions with creations of device attributes after the device was
 announced to userspace.
 
 All the various pieces are acked by the different subsystem maintainers.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.21 (GNU/Linux)
 
 iEYEABECAAYFAlIlIPcACgkQMUfUDdst+ynUMwCaAnITsxyDXYQ4DqEsz8EcOtMk
 718AoLrgnUZs3B+70AT34DVktg4HSThk
 =USl9
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg KH:
 "Here's the big driver core pull request for 3.12-rc1.

  Lots of tiny changes here fixing up the way sysfs attributes are
  created, to try to make drivers simpler, and fix a whole class race
  conditions with creations of device attributes after the device was
  announced to userspace.

  All the various pieces are acked by the different subsystem
  maintainers"

* tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits)
  firmware loader: fix pending_fw_head list corruption
  drivers/base/memory.c: introduce help macro to_memory_block
  dynamic debug: line queries failing due to uninitialized local variable
  sysfs: sysfs_create_groups returns a value.
  debugfs: provide debugfs_create_x64() when disabled
  rbd: convert bus code to use bus_groups
  firmware: dcdbas: use binary attribute groups
  sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled
  driver core: add #include <linux/sysfs.h> to core files.
  HID: convert bus code to use dev_groups
  Input: serio: convert bus code to use drv_groups
  Input: gameport: convert bus code to use drv_groups
  driver core: firmware: use __ATTR_RW()
  driver core: core: use DEVICE_ATTR_RO
  driver core: bus: use DRIVER_ATTR_WO()
  driver core: create write-only attribute macros for devices and drivers
  sysfs: create __ATTR_WO()
  driver-core: platform: convert bus code to use dev_groups
  workqueue: convert bus code to use dev_groups
  MEI: convert bus code to use dev_groups
  ...
2013-09-03 11:37:15 -07:00
Dave Airlie
9c725e5bcd Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-next
Alex writes:
This is the radeon drm-next request.  Big changes include:
- support for dpm on CIK parts
- support for ASPM on CIK parts
- support for berlin GPUs
- major ring handling cleanup
- remove the old 3D blit code for bo moves in favor of CP DMA or sDMA
- lots of bug fixes

[airlied: fix up a bunch of conflicts from drm_order removal]

* 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits)
  drm/radeon/dpm: make sure dc performance level limits are valid (CI)
  drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
  drm/radeon: gcc fixes for extended dpm tables
  drm/radeon: gcc fixes for kb/kv dpm
  drm/radeon: gcc fixes for ci dpm
  drm/radeon: gcc fixes for si dpm
  drm/radeon: gcc fixes for ni dpm
  drm/radeon: gcc fixes for trinity dpm
  drm/radeon: gcc fixes for sumo dpm
  drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
  drm/radeon: gcc fixes for rv6xx dpm
  drm/radeon: gcc fixes for radeon_atombios.c
  drm/radeon: enable UVD interrupts on CIK
  drm/radeon: fix init ordering for r600+
  drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled
  drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init
  drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
  radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
  drm/radeon/audio: set up the sads on DCE3.2 asics
  drm/radeon: fix handling of variable sized arrays for router objects
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_gem_dmabuf.c
	drivers/gpu/drm/i915/intel_pm.c
	drivers/gpu/drm/radeon/cik.c
	drivers/gpu/drm/radeon/ni.c
	drivers/gpu/drm/radeon/r600.c
2013-09-02 09:31:40 +10:00
Darren Etheridge
028cd86b79 video: da8xx-fb: fix the polarities of the hsync/vsync pulse
The polarities were being set to active low when fbdev was requesting active
high.  This patch reverses it so that what is set into the LCD controller is
correct.

Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-08-30 14:51:30 +03:00
Darren Etheridge
2645ad1621 video: da8xx-fb: support lcdc v2 timing register expansion
TI LCD controller version 2 adds some extra bits in a register to
increase the available size to represent horizontal timings. This
patch allows the fbdev driver to utilize those extra bits.
This will become important for driving an HDMI encoder from the lcd
controller where some of the VESA/CEA modes require quite large porches.

Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-08-30 14:51:30 +03:00
Darren Etheridge
83edd73a9c video: da8xx-fb: fixing timing off by one errors
The LCD controller represents some of the timing fields with a 0
in the register representing 1.  This was not taken into account
when these registers were being set.  Interestingly enough not
all of the LCDC controller timing registers implement this representation
so carefully went through the technical reference manual to only "fix"
the correct timings.

Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-08-30 14:50:26 +03:00
Darren Etheridge
a592d9fd63 video: da8xx-fb fixing incorrect porch mappings
The driver was mapping the wrong fbdev margins to the
front porch / back porch for both vertical and horizontal
timings.

This patch corrects it so that:

hfp = right margin
hbp = left margin
vbp = upper margin
vfp = lower margin

Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-08-30 14:50:26 +03:00