We have a board where measurements indicate that the current three
options - leaving IO_IMPEDANCE_CTRL at the reset value (which is
factory calibrated to a value corresponding to approximately 50 ohms)
or using one of the two boolean properties to set it to the min/max
value - are too coarse.
There is no fixed mapping from register values to values in the range
35-70 ohms; it varies from chip to chip, and even that target range is
approximate. So add a DT binding for an nvmem cell which can be
populated during production with a value suitable for each specific
board.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Mostly driver fixes.
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls"
* tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
net: axienet: add missing error return code in axienet_probe()
Revert "net: Add a second bind table hashed by port and address"
net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg
net: usb: ax88179_178a needs FLAG_SEND_ZLP
MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS
ARM: dts: at91: ksz9477_evb: fix port/phy validation
net: bgmac: Fix an erroneous kfree() in bgmac_remove()
ice: Fix memory corruption in VF driver
ice: Fix queue config fail handling
ice: Sync VLAN filtering features for DVM
ice: Fix PTP TX timestamp offset calculation
mlxsw: spectrum_cnt: Reorder counter pools
docs: networking: phy: Fix a typo
amd-xgbe: Use platform_irq_count()
octeontx2-vf: Add support for adaptive interrupt coalescing
xilinx: Fix build on x86.
net: axienet: Use iowrite64 to write all 64b descriptor pointers
net: axienet: make the 64b addresable DMA depends on 64b archectures
net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization
net: hns3: fix PF rss size initialization bug
...
A board may have no independent reset-line, so reset cannot be used
inside switch driver.
E.g. on Bananapi-R2 Pro switch and gmac are connected to same reset-line.
Resets should be acquired only to 1 device/driver. This prevents reset to
be bound to switch-driver if reset is already used for gmac. If reset is
only used by switch driver it resets the switch *and* the gmac after the
mdio bus comes up resulting in mdio bus goes down. It takes some time
until all is up again, switch driver tries to read from mdio, will fail
and defer the probe. On next try the reset does the same again.
Make reset optional for such boards.
Allow port 5 as cpu-port and phy-mode rgmii for mt7531.
- MT7530 supports RGMII on port 5 and RGMII/TRGMII on port 6.
- MT7531 supports on port 5 RGMII and SGMII (dual-sgmii) and
SGMII on port 6.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull kvm fixes from Paolo Bonzini:
"While last week's pull request contained miscellaneous fixes for x86,
this one covers other architectures, selftests changes, and a bigger
series for APIC virtualization bugs that were discovered during 5.20
development. The idea is to base 5.20 development for KVM on top of
this tag.
ARM64:
- Properly reset the SVE/SME flags on vcpu load
- Fix a vgic-v2 regression regarding accessing the pending state of a
HW interrupt from userspace (and make the code common with vgic-v3)
- Fix access to the idreg range for protected guests
- Ignore 'kvm-arm.mode=protected' when using VHE
- Return an error from kvm_arch_init_vm() on allocation failure
- A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
x86-64:
- Fix error in page tables with MKTME enabled
- Dirty page tracking performance test extended to running a nested
guest
- Disable APICv/AVIC in cases that it cannot implement correctly"
[ This merge also fixes a misplaced end parenthesis bug introduced in
commit 3743c2f025 ("KVM: x86: inhibit APICv/AVIC on changes to APIC
ID or APIC base") pointed out by Sean Christopherson ]
Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: selftests: Restrict test region to 48-bit physical addresses when using nested
KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2
KVM: selftests: Clean up LIBKVM files in Makefile
KVM: selftests: Link selftests directly with lib object files
KVM: selftests: Drop unnecessary rule for STATIC_LIBS
KVM: selftests: Add a helper to check EPT/VPID capabilities
KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h
KVM: selftests: Refactor nested_map() to specify target level
KVM: selftests: Drop stale function parameter comment for nested_map()
KVM: selftests: Add option to create 2M and 1G EPT mappings
KVM: selftests: Replace x86_page_size with PG_LEVEL_XX
KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE
KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put
KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking
KVM: x86: disable preemption while updating apicv inhibition
KVM: x86: SVM: fix avic_kick_target_vcpus_fast
KVM: x86: SVM: remove avic's broken code that updated APIC ID
KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base
KVM: x86: document AVIC/APICv inhibit reasons
KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs
...
Pull x86 MMIO stale data fixes from Thomas Gleixner:
"Yet another hw vulnerability with a software mitigation: Processor
MMIO Stale Data.
They are a class of MMIO-related weaknesses which can expose stale
data by propagating it into core fill buffers. Data which can then be
leaked using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too"
* tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
Pull Kbuild fixes from Masahiro Yamada:
- Make the *.mod build rule portable for POSIX awk
- Fix regression of 'make nsdeps'
- Make scripts/check-local-export working for older bash versions
- Fix scripts/gdb to extract the .config data from vmlinux
* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/gdb: change kernel config dumping method
scripts/check-local-export: avoid 'wait $!' for process substitution
scripts/nsdeps: adjust to the format change of *.mod files
kbuild: avoid regex RS for POSIX awk
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: 2f5268a924 ("sctp: allow users to set netns ecn flag with sysctl")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
We need to document this especially as when using the feature
of User Message Interleaving, some socket options also needs
to be set.
Fixes: 463118c34a ("sctp: support sysctl to allow users to use stream interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: c0d8bab6ae ("sctp: add get and set sockopt for reconf_enable")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netfs_io_request cleanup op is now always in a position to be given a
pointer to a netfs_io_request struct, so this can be passed in instead of
the mapping and private data arguments (both of which are included in the
struct).
So rename the ->cleanup op to ->free_request (to match ->init_request) and
pass in the I/O pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Change the signature of netfs helper functions to take a struct netfs_inode
pointer rather than a struct inode pointer where appropriate, thereby
relieving the need for the network filesystem to convert its internal inode
format down to the VFS inode only for netfslib to bounce it back up. For
type safety, it's better not to do that (and it's less typing too).
Give netfs_write_begin() an extra argument to pass in a pointer to the
netfs_inode struct rather than deriving it internally from the file
pointer. Note that the ->write_begin() and ->write_end() ops are intended
to be replaced in the future by netfslib code that manages this without the
need to call in twice for each page.
netfs_readpage() and similar are intended to be pointed at directly by the
address_space_operations table, so must stick to the signature dictated by
the function pointers there.
Changes
=======
- Updated the kerneldoc comments and documentation [DH].
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/CAHk-=wgkwKyNmNdKpQkqZ6DnmUL-x9hp0YBnUGjaPFEAdxDTbw@mail.gmail.com/
As Liviu pointed out, the arm,malidp-arqos-high-level property
mentioned in the original .txt binding was a mistake, and
arm,malidp-arqos-value needs to take its place.
The binding commit ce6eb0253c ("dt/bindings: display: Add optional
property node define for Mali DP500") mentions the right name in the
commit message, but has the wrong name in the diff.
Commit d298e6a27a ("drm/arm/mali-dp: Add display QoS interface
configuration for Mali DP500") uses the property in the driver, but uses
the shorter name.
Remove the wrong property from the binding, and use the proper name in
the example. The actual property was already documented properly.
Fixes: 2c8b082a3a ("dt-bindings: display: convert Arm Mali-DP to DT schema")
Link: https://lore.kernel.org/linux-arm-kernel/YnumGEilUblhBx8E@e110455-lin.cambridge.arm.com/
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220609162729.1441760-1-andre.przywara@arm.com
Pull documentation fixes from Jonathan Corbet:
"A few documentation fixes for 5.19, including moving the new HTE docs
to a more suitable location, adding loongarch to the features lists,
and a couple of typo fixes"
* tag 'docs-5.19-3' of git://git.lwn.net/linux:
docs: arm: tcm: Fix typo in description of TCM and MMU usage
docs: Move the HTE documentation to driver-api/
docs: usb: fix literal block marker in usbmon verification example
Documentation/features: Update the arch support status files
Pull arm64 fixes from Catalin Marinas:
- SME save/restore for EFI fix - incorrect logic for detecting the need
for saving/restoring the FFR state.
- SME fix for a CPU ID field value.
- Sysreg generation awk script fix (comparison operator).
- Some typos in documentation or comments and silence a sparse warning
(missing prototype).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add kasan_hw_tags_enable() prototype to silence sparse
arm64/sme: Fix EFI save/restore
arm64/fpsimd: Fix typo in comment
arm64/sysreg: Fix typo in Enum element regex
arm64/sme: Fix SVE/SME typo in ABI documentation
arm64/sme: Fix tests for 0b1111 value ID registers
Pull ATA fixes from Damien Le Moal:
"Several small fixes for rc2:
- Remove unused field in struct ata_port (Hannes)
- Fix a potential (very unlikely) NULL pointer dereference in
ata_host_alloc_pinfo() (Sergey)
- Fix a device reference leak in the pata_octeon_cf driver (Miaoqian)
- Fixes for handling access to the concurrent positioning ranges log
page used with multi-actuator HDDs (Tyler)
- Fix the values shown by the pio_mode and dma_mode sysfs device
attributes (Sergey)
- Update the MAINTAINERS file to add libata sysfs ABI documentation
file (Sergey)"
* tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
MAINTAINERS: add ATA sysfs file documentation to libata entry
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
libata: fix translation of concurrent positioning ranges
libata: fix reading concurrent positioning ranges log
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
ata: libata: drop 'sas_last_tag'
Pull xen updates from Juergen Gross:
- a small cleanup removing "export" of an __init function
- a small series adding a new infrastructure for platform flags
- a series adding generic virtio support for Xen guests (frontend side)
* tag 'for-linus-5.19a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
arm/xen: Assign xen-grant DMA ops for xen-grant DMA devices
xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devices
xen/grant-dma-iommu: Introduce stub IOMMU driver
dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops
xen/virtio: Enable restricted memory access using Xen grant mappings
xen/grant-dma-ops: Add option to restrict memory access under Xen
xen/grants: support allocating consecutive grants
arm/xen: Introduce xen_setup_dma_ops()
virtio: replace arch_has_restricted_virtio_memory_access()
kernel: add platform_has() infrastructure
Bash 4.4, released in 2016, supports 'wait $!' to check the exit status
of a process substitution, but it seems too new.
Some people using older bash versions (on CentOS 7, Ubuntu 16.04, etc.)
reported an error like this:
./scripts/check-local-export: line 54: wait: pid 17328 is not a child of this shell
I used the process substitution to avoid a pipeline, which executes each
command in a subshell. If the while-loop is executed in the subshell
context, variable changes within are lost after the subshell terminates.
Fortunately, Bash 4.2, released in 2011, supports the 'lastpipe' option,
which makes the last element of a pipeline run in the current shell process.
Switch to the pipeline with 'lastpipe' solution, and also set 'pipefail'
to catch errors from ${NM}.
Add the bash requirement to Documentation/process/changes.rst.
Fixes: 31cb50b559 ("kbuild: check static EXPORT_SYMBOL* by script instead of modpost")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The hardware timestamp engine documentation is driver API material, and
really belongs in the driver-API book; move it there.
Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The {dma|pio}_mode sysfs files are incorrectly documented as having a
list of the supported DMA/PIO transfer modes, while the corresponding
fields of the *struct* ata_device hold the transfer mode IDs, not masks.
To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs
files are handled by the ata_bitfield_name_match() macro which leads to
reading such kind of nonsense from them:
$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4,
XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1,
XFER_PIO_0
Using the correct ata_bitfield_name_search() macro fixes that:
$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_PIO_4
While fixing the file documentation, somewhat reword the {dma|pio}_mode
file doc and add a note about being mostly useful for PATA devices to
the xfer_mode file doc...
Fixes: d9027470b8 ("[libata] Add ATA transport class")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Another round from new cases in 5.19-rc of removing redundant
minItems/maxItems when 'items' list is specified. This time it is in
if/then schemas as the meta-schema was failing to check this case.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220606225137.1536010-1-robh@kernel.org
The main purpose of this binding is to communicate Xen specific
information using generic IOMMU device tree bindings (which is
a good fit here) rather than introducing a custom property.
Introduce Xen specific IOMMU for the virtualized device (e.g. virtio)
to be used by Xen grant DMA-mapping layer in the subsequent commit.
The reference to Xen specific IOMMU node using "iommus" property
indicates that Xen grant mappings need to be enabled for the device,
and it specifies the ID of the domain where the corresponding backend
resides. The domid (domain ID) is used as an argument to the Xen grant
mapping APIs.
This is needed for the option to restrict memory access using Xen grant
mappings to work which primary goal is to enable using virtio devices
in Xen guests.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-6-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull delay-accounting update from Andrew Morton:
"A single featurette for delay accounting.
Delayed a bit because, unusually, it had dependencies on both the
mm-stable and mm-nonmm-stable queues"
* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
delayacct: track delays from write-protect copy
Pull clockevent/clocksource updates from Thomas Gleixner:
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power
states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
clocksource/drivers/timer-sun5i: Convert to SPDX identifier
clocksource/drivers/timer-sun4i: Convert to SPDX identifier
clocksource/drivers/pistachio: Convert to SPDX identifier
clocksource/drivers/orion: Convert to SPDX identifier
clocksource/drivers/lpc32xx: Convert to SPDX identifier
clocksource/drivers/digicolor: Convert to SPDX identifier
clocksource/drivers/armada-370-xp: Convert to SPDX identifier
clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
clocksource/drivers/jcore: Convert to SPDX identifier
clocksource/drivers/bcm_kona: Convert to SPDX identifier
clocksource/drivers/sp804: Avoid error on multiple instances
clocksource/drivers/riscv: Events are stopped during CPU suspend
clocksource/drivers/ixp4xx: Drop boardfile probe path
dt-bindings: timer: Add compatible for Mediatek MT8186
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
Pull regulator fix from Mark Brown:
"One fix that came in during the merge window, fixing an error in the
examples in the DT binding documentation for mt6315"
* tag 'regulator-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6315-regulator: fix invalid allowed mode
Pull devicetree fixes from Rob Herring:
- Fixes for unevaluatedProperties warnings.
These were missed to due to a bug in dtschema which is now fixed. The
changes involve either adding missing properties or removing spurious
properties from examples.
- Update several Qualcomm binding maintainer email addresses
- Fix typo in imx8mp-media-blk-ctrl example
- Fix fixed string pattern in qcom,smd
- Correct the order of 'reg' entries in Xilinx PCI binding
* tag 'devicetree-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mtd: spi-nand: Add spi-peripheral-props.yaml reference
dt-bindings: memory-controllers: ingenic: Split out child node properties
dt-bindings: net/dsa: Add spi-peripheral-props.yaml references
dt-bindings: PCI: apple: Add missing 'power-domains' property
dt-bindings: Update Sibi Sankar's email address
dt-bindings: clock: Update my email address
dt-bindings: PCI: xilinx-cpm: Fix reg property order
dt-bindings: net: Fix unevaluatedProperties warnings in examples
dt-bindings: PCI: socionext,uniphier-pcie: Add missing child interrupt controller
dt-bindings: usb: snps,dwc3: Add missing 'dma-coherent' property
dt-bindings: soc: imx8mp-media-blk-ctrl: Fix DT example
dt-bindings: soc: qcom,smd: do not use pattern for simple rpm-requests string
