Commit Graph

12 Commits

Author SHA1 Message Date
WANG Cong
2ccccf5fb4 net_sched: update hierarchical backlog too
When the bottom qdisc decides to, for example, drop some packet,
it calls qdisc_tree_decrease_qlen() to update the queue length
for all its ancestors, we need to update the backlog too to
keep the stats on root qdisc accurate.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29 17:02:33 -05:00
David S. Miller
b04096ff33 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Four minor merge conflicts:

1) qca_spi.c renamed the local variable used for the SPI device
   from spi_device to spi, meanwhile the spi_set_drvdata() call
   got moved further up in the probe function.

2) Two changes were both adding new members to codel params
   structure, and thus we had overlapping changes to the
   initializer function.

3) 'net' was making a fix to sk_release_kernel() which is
   completely removed in 'net-next'.

4) In net_namespace.c, the rtnl_net_fill() call for GET operations
   had the command value fixed, meanwhile 'net-next' adjusted the
   argument signature a bit.

This also matches example merge resolutions posted by Stephen
Rothwell over the past two days.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 14:31:43 -04:00
Eric Dumazet
80ba92fa1a codel: add ce_threshold attribute
For DCTCP or similar ECN based deployments on fabrics with shallow
buffers, hosts are responsible for a good part of the buffering.

This patch adds an optional ce_threshold to codel & fq_codel qdiscs,
so that DCTCP can have feedback from queuing in the host.

A DCTCP enabled egress port simply have a queue occupancy threshold
above which ECT packets get CE mark.

In codel language this translates to a sojourn time, so that one doesn't
have to worry about bytes or bandwidth but delays.

This makes the host an active participant in the health of the whole
network.

This also helps experimenting DCTCP in a setup without DCTCP compliant
fabric.

On following example, ce_threshold is set to 1ms, and we can see from
'ldelay xxx us' that TCP is not trying to go around the 5ms codel
target.

Queue has more capacity to absorb inelastic bursts (say from UDP
traffic), as queues are maintained to an optimal level.

lpaa23:~# ./tc -s -d qd sh dev eth1
qdisc mq 1: dev eth1 root
 Sent 87910654696 bytes 58065331 pkt (dropped 0, overlimits 0 requeues 42961)
 backlog 3108242b 364p requeues 42961
qdisc codel 8063: dev eth1 parent 1:1 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms
 Sent 7363778701 bytes 4863809 pkt (dropped 0, overlimits 0 requeues 5503)
 rate 2348Mbit 193919pps backlog 255866b 46p requeues 5503
  count 0 lastcount 0 ldelay 1.0ms drop_next 0us
  maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 72384
qdisc codel 8064: dev eth1 parent 1:2 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms
 Sent 7636486190 bytes 5043942 pkt (dropped 0, overlimits 0 requeues 5186)
 rate 2319Mbit 191538pps backlog 207418b 64p requeues 5186
  count 0 lastcount 0 ldelay 694us drop_next 0us
  maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 69873
qdisc codel 8065: dev eth1 parent 1:3 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms
 Sent 11569360142 bytes 7641602 pkt (dropped 0, overlimits 0 requeues 5554)
 rate 3041Mbit 251096pps backlog 210446b 59p requeues 5554
  count 0 lastcount 0 ldelay 889us drop_next 0us
  maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 37780
...

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Glenn Judd <glenn.judd@morganstanley.com>
Cc: Nandita Dukkipati <nanditad@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 19:50:20 -04:00
Eric Dumazet
a5d2809040 codel: fix maxpacket/mtu confusion
Under presence of TSO/GSO/GRO packets, codel at low rates can be quite
useless. In following example, not a single packet was ever dropped,
while average delay in codel queue is ~100 ms !

qdisc codel 0: parent 1:12 limit 16000p target 5.0ms interval 100.0ms
 Sent 134376498 bytes 88797 pkt (dropped 0, overlimits 0 requeues 0)
 backlog 13626b 3p requeues 0
  count 0 lastcount 0 ldelay 96.9ms drop_next 0us
  maxpacket 9084 ecn_mark 0 drop_overlimit 0

This comes from a confusion of what should be the minimal backlog. It is
pretty clear it is not 64KB or whatever max GSO packet ever reached the
qdisc.

codel intent was to use MTU of the device.

After the fix, we finally drop some packets, and rtt/cwnd of my single
TCP flow are meeting our expectations.

qdisc codel 0: parent 1:12 limit 16000p target 5.0ms interval 100.0ms
 Sent 102798497 bytes 67912 pkt (dropped 1365, overlimits 0 requeues 0)
 backlog 6056b 3p requeues 0
  count 1 lastcount 1 ldelay 36.3ms drop_next 0us
  maxpacket 10598 ecn_mark 0 drop_overlimit 0

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kathleen Nichols <nichols@pollere.com>
Cc: Dave Taht <dave.taht@gmail.com>
Cc: Van Jacobson <vanj@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-03 22:17:40 -04:00
Eric Dumazet
d2de875c6d net: use ktime_get_ns() and ktime_get_real_ns() helpers
ktime_get_ns() replaces ktime_to_ns(ktime_get())

ktime_get_real_ns() replaces ktime_to_ns(ktime_get_real())

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 19:57:23 -07:00
Daniel Borkmann
89770b0a69 net: introduce reciprocal_scale helper and convert users
As David Laight suggests, we shouldn't necessarily call this
reciprocal_divide() when users didn't requested a reciprocal_value();
lets keep the basic idea and call it reciprocal_scale(). More
background information on this topic can be found in [1].

Joint work with Hannes Frederic Sowa.

  [1] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html

Suggested-by: David Laight <david.laight@aculab.com>
Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21 23:17:20 -08:00
Jesper Dangaard Brouer
1ba3aab303 net: codel: Avoid undefined behavior from signed overflow
As described in commit 5a581b367 (jiffies: Avoid undefined
behavior from signed overflow), according to the C standard
3.4.3p3, overflow of a signed integer results in undefined
behavior.

To fix this, do as the above commit, and do an unsigned
subtraction, and interpreting the result as a signed
two's-complement number.  This is based on the theory from
RFC 1982 and is nicely described in wikipedia here:
 https://en.wikipedia.org/wiki/Serial_number_arithmetic#General_Solution

A side-note, I have seen practical issues with the previous logic
when dealing with 16-bit, on a 64-bit machine (gcc version
4.4.5). This were 32-bit, which I have not observed issues with.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jesper Dangaard Brouer <netoptimizer@brouer.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 20:01:29 -05:00
Eric Dumazet
2359a47671 codel: refine one condition to avoid a nul rec_inv_sqrt
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

To keep codel_vars_init() as efficient as possible, refine
the condition to make sure rec_inv_sqrt initial value is correct

Many thanks to Anton Mich for discovering the issue and suggesting
a fix.

Reported-by: Anton Mich <lp2s1h@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-10 16:52:54 -07:00
Eric Dumazet
865ec5523d fq_codel: should use qdisc backlog as threshold
codel_should_drop() logic allows a packet being not dropped if queue
size is under max packet size.

In fq_codel, we have two possible backlogs : The qdisc global one, and
the flow local one.

The meaningful one for codel_should_drop() should be the global backlog,
not the per flow one, so that thin flows can have a non zero drop/mark
probability.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dave Taht <dave.taht@bufferbloat.net>
Cc: Kathleen Nichols <nichols@pollere.com>
Cc: Van Jacobson <van@pollere.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16 15:30:26 -04:00
Eric Dumazet
6ff272c9ad codel: use u16 field instead of 31bits for rec_inv_sqrt
David pointed out gcc might generate poor code with 31bit fields.

Using u16 is more than enough and permits a better code output.

Also make the code intent more readable using constants, fixed point arithmetic
not being trivial for everybody.

Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-14 18:32:56 -04:00
Eric Dumazet
536edd6710 codel: use Newton method instead of sqrt() and divides
As Van pointed out, interval/sqrt(count) can be implemented using
multiplies only.

http://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Iterative_methods_for_reciprocal_square_roots

This patch implements the Newton method and reciprocal divide.

Total cost is 15 cycles instead of 120 on my Corei5 machine (64bit
kernel).

There is a small 'error' for count values < 5, but we don't really care.

I reuse a hole in struct codel_vars :
 - pack the dropping boolean into one bit
 - use 31bit to store the reciprocal value of sqrt(count).

Suggested-by: Van Jacobson <van@pollere.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dave Taht <dave.taht@bufferbloat.net>
Cc: Kathleen Nichols <nichols@pollere.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Matt Mathis <mattmathis@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Nandita Dukkipati <nanditad@google.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12 15:50:49 -04:00
Eric Dumazet
76e3cc126b codel: Controlled Delay AQM
An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson.

http://queue.acm.org/detail.cfm?id=2209336

This AQM main input is no longer queue size in bytes or packets, but the
delay packets stay in (FIFO) queue.

As we don't have infinite memory, we still can drop packets in enqueue()
in case of massive load, but mean of CoDel is to drop packets in
dequeue(), using a control law based on two simple parameters :

target : target sojourn time (default 5ms)
interval : width of moving time window (default 100ms)

Based on initial work from Dave Taht.

Refactored to help future codel inclusion as a plugin for other linux
qdisc (FQ_CODEL, ...), like RED.

include/net/codel.h contains codel algorithm as close as possible than
Kathleen reference.

net/sched/sch_codel.c contains the linux qdisc specific glue.

Separate structures permit a memory efficient implementation of fq_codel
(to be sent as a separate work) : Each flow has its own struct
codel_vars.

timestamps are taken at enqueue() time with 1024 ns precision, allowing
a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses
usec as base unit.

Selected packets are dropped, unless ECN is enabled and packets can get
ECN mark instead.

Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and
tg3 drivers (BQL enabled).

Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ]
                          [ interval TIME ] [ ecn ]

qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn
 Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0)
 rate 202365Kbit 16708pps backlog 113550b 75p requeues 0
  count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us
  maxpacket 1514 ecn_mark 84399 drop_overlimit 0

CoDel must be seen as a base module, and should be used keeping in mind
there is still a FIFO queue. So a typical setup will probably need a
hierarchy of several qdiscs and packet classifiers to be able to meet
whatever constraints a user might have.

One possible example would be to use fq_codel, which combines Fair
Queueing and CoDel, in replacement of sfq / sfq_red.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>
Cc: Kathleen Nichols <nichols@pollere.com>
Cc: Van Jacobson <van@pollere.net>
Cc: Tom Herbert <therbert@google.com>
Cc: Matt Mathis <mattmathis@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 23:35:02 -04:00