The comedi core can use the (*insn_bits) function to emulate the
(*insn_read) function.
The digital output (*insn_bits) function properly handles the
VMK8061_MODEL to read the digital output states before returning.
Remove the unnecessary (*insn_read) function. It's also not
necessary to set the SDF_READABLE flag so remove the entire
conditional in the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the 'pwm_bits' in the boardinfo to 'pwm_maxdata' so that the
calculation of s->maxdata can be removed. Also, change the type to
match the comedi_subdevice type. For aesthetic reasons, rename the
'pwm_chans' boardinfo and change its type also.
Remove the '0' values in the boardinfo.
Rename the (*insn_read) and (*insn_write) functions for the pwm
subdevice to make grepping easier.
For aesthetic reasons, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the 'cnt_bits' in the boardinfo to 'cnt_maxdata' so that the
calculation of s->maxdata can be removed. Also, change the type to
match the comedi_subdevice type. Add a comment about the '0' value
for DEVICE_VMK8061.
The s->maxdata should always be set for the subdevice. Move it out
of the conditional.
Rename the (*insn_read), (*insn_config_, and (*insn_write) functions
for the counter subdevice to make grepping easier.
For aesthetic reasons, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the SDF_GROUND flag from s->subdev_flags. This flag only has
meaning for analog subdevices.
Add the missing s->range_table for the subdevice.
Rename the (*insn_write), (*insn_bits), and (*insn_read) functions
for the digital input subdevice to make grepping easier.
For aesthetic reasons, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the type for the digital input 'di_chans' boardinfo to match
the comedi_subdevice type it is set to. For aesthetic reasons, rename
the variable also.
Remove the SDF_GROUND flag from s->subdev_flags. This flag only has
meaning for analog subdevices.
Add the missing s->range_table for the subdevice.
Rename the (*insn_read) and (*insn_bits) functions for the digital
input subdevice to make grepping easier.
For aesthetic reasons, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the type for the analog output 'ao_chans' boardinfo to match
the comedi_subdevice type it is set to. For aesthetic reasons, rename
the variable also.
Rename the (*insn_write) and (*insn_read) functions for the analog
output subdevice to make grepping easier.
For aesthetic reasons, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the 'ai_bits' in the boardinfo to 'ai_maxdata' so that the
calculation of s->maxdata can be removed.
Change the types for the analog input boardinfo to match the
comedi_subdevice types they are set to.
Rename the (*insn_read) function for the analog input subdevice from
vmk80xx_ai_rinsn to vmk80xx_ai_insn_read to make grepping easier.
For aesthetic reasons, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only information in the boardinfo that is used outside of the
attach of the driver is the 'model' of the device.
Remove the 'board' pointer from the private data and replace it with
the 'model' enum and just copy that information over during the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the usb_driver (*probe) simply call comedi_usb_auto_config()
and move all the (*probe) code into the (*auto_attach) function.
This allows getting rid of the static private data array since we
no longer do part of the initialization in the (*probe) and then
finish it in the (*auto_attach). We can simply kzalloc the private
data instead. The comedi core will then handle the kfree of the
data when the driver is detached.
We can also get rid of the static 'glb_mutex' since this mutex was
only used to protect the static private data array.
Change the parameters for a couple of the helper functions used
during the auto attach. Now that the comedi_device is available
we can simply pass that pointer and get the specific pointers
needed by the helper functions from it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow the comedi usb drivers to pass a 'context' from their (*probe)
functions to the comedi core's comedi_usb_auto_config(). This 'context'
is then passed to comedi_auto_config() and then to the comedi_driver's
(*auto_attach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'attached' flag in the private data is set after the comedi_driver
(*auto_attach) function has completed successfully.
The only places it's checked are in rudimentary_check(), which does
some basic sanity checks before doing any of the subdevice operations,
and vmk80xx_auto_attach(), which is the comedi_driver (*auto_attach)
function.
The (*auto_attach) function can only be called as the result of a
successfull usb_driver (*probe). Part of the probe is to locate a
free slot in the static private data array. All free slots are
initialized to '0' so the 'attached' flag will always be cleared.
Remove the unneccessary 'attached' flag in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'probed' variable is used in the usb driver (*probe) to detect an
unused element in the static private data arry. This variable is then
set after the usb driver has completed its (*probe) before calling
comedi_usb_auto_config(). When the comedi core does the auto config
it will call the (*auto_attach) function, vmk80xx_auto_attach(), which
then locates the correct private data in the static array by checking
to see if it has been 'probed' and that the 'intf' variable matches
the usb_interface pointer for the usb device.
Now that the private data is clean after failed usb probes and disconnects
we don't have to worry about have a garbage 'intf' value in the private
data that might match.
Remove the 'probed' flag from the private data and just use the 'intf'
pointer to detect the match.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the private data used in this driver is stored in a static
array. During the usb (*probe) and empty location is found in this
array for use by the usb device. Some initialization of the private
data is then done before comedi_usb_auto_config() is called to allow
the comedi core to attach its comedi_device to the usb device.
The (*probe) can fail for various reasons. If it does, make sure that
the private data is clean before returning an error.
The usb (*disconnect) simply calls comedi_usb_auto_unconfig() to
allow the comedi core to disconnect its comedi_device from the usb
device. Since the private data points to the static array it cannot
be kfree'ed during the detach. Instead make sure it clean before
leaving the detach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'count' in the private data is only used in a couple dev_info()
kernel messages. These messages are just added noise.
Remove the 'count' variable in the private data as well as the
dev_info() messages.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the code that allocates the usb buffers out of vmk80xx_usb_probe().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the code that detects the usb endpoints out of vmk80xx_usb_probe().
Cleanup the detection code in the new function,
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename some of the local variables used in this driver to make the
code easier to maintain and understand.
s/udev/usb the usb_device that the comedi_driver is attached to
s/dev/devpriv the private data of the comedi_device
s/cdev/dev the comedi_device
Also, use some local variables in a couple of the functions to tidy
up the code a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct vmk80xx_usb is actually the private data for the
comedi_device. For aesthetic reasons, rename the struct to
vmk80xx_private.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These enum values are only used in the initialization of the
comedi_subdevices. They don't help make the code any clearer
so just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the information in the boardinfo is common for both boards
supported by this driver. Remove that information from the boardinfo
and just initialize the subdevice values directly.
Also, remove any information in the boardinfo that is not used in
the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Save a copy of the boardinfo pointer in the comedi_device 'board_ptr'.
The subdevice functions can then simply get it using the comedi_board()
helper.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The normal way of presenting the board specific information in comedi
drivers is store the data in a static const array. This data is then
accessed using a pointer, normally the comedi_device 'board_ptr',
Move the boardinfo for the two boards supported by this driver from
the vmk80xx_usb_probe() function into a static const array.
Change the access of this information so a pointer is used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_driver (*disconnect) in this driver is simply a wrapper around
comedi_auto_unconfig(). Just use comedi_auto_unconfig() directly for
the (*disconnect).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_driver (*disconnect) in this driver calls the comedi core
comedi_usb_auto_unconfig() which calls the comedi_driver (*detach).
Move the code in the (*disconnect) to the (*detach) to get all the
disconnect/detach in one place.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comedi USB driver supports attaching with the auto config
mechanism. Remove the manual attaching support using the
COMEDI_DEVCONFIG ioctl.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lockdep complains about recursive deadlock of zram->init_lock.
[1] made it false positive because we can't request IO to zram
before setting disksize. Anyway, we should shut lockdep up to
avoid many reporting from user.
[1] : zram: force disksize setting before using zram
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kbuild bot whinges due to print format mistmatch caused by
zram: force disksize setting before using zram.
This patch fixes it.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SMEP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMEP needs to be manually
disabled when guest switches to non-paging mode.
We met an issue that, SMP Linux guest with recent kernel (enable
SMEP support, for example, 3.5.3) would crash with triple fault if
setting unrestricted_guest=0. This is because KVM uses an identity
mapping page table to emulate the non-paging mode, where the page
table is set with USER flag. If SMEP is still enabled in this case,
guest will meet unhandlable page fault and then crash.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
As of commit fea82210 ("m68k: switch to saner kernel_execve() semantics")
the non-mmu m68k targets have trapped on booting. The execing of /bin/init
causes the exec path to try and return through a 0x0 return address - thus
trapping or otherwise hanging or crashing.
The problem isn't in the exec path as such though, but rather in the
m68knommu start_thread() macro. It is trying to clear the a6 register that
it assumes is part of a struct switch_stack below the thread registers on
our stack. But that is not what the stack frames look like when this is run.
So it ends up corrupting our call stack and zeroing out a function return
address that is sitting there.
The clearing of a6 was introduced many years ago in commit 7bf9a37d8d
("m68knommu: force stack alignment on ColdFire"). It used to work because
the kernel init exec code path had a short cut back to the exception return
code, and it didn't need to return through the calls on the stack.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
From Kukjin Kim:
This is 4th cleanup for Samsung S3C24XX stuff, and removes plat-s3c24xx
directory.
* 'next/cleanup-s3c24xx-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C24XX: header mach/regs-mem.h local
ARM: S3C24XX: header mach/regs-power.h local
ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
In our test lab, we have a simple SCTP client connecting to a SCTP
server via an IPVS load balancer. On some machines, load balancing
works, but on others the initial handshake just fails, thus no
SCTP connection whatsoever can be established!
We observed that the SCTP INIT-ACK handshake reply from the IPVS
machine to the client had a correct IP checksum, but corrupt SCTP
checksum when forwarded, thus on the client-side the packet was
dropped and an intial handshake retriggered until all attempts
run into the void.
To fix this issue, this patch i) adds a missing CHECKSUM_UNNECESSARY
after the full checksum (re-)calculation (as done in IPVS TCP and UDP
code as well), ii) calculates the checksum in little-endian format
(as fixed with the SCTP code in commit 4458f04c: sctp: Clean up sctp
checksumming code) and iii) refactors duplicate checksum code into a
common function. Tested by myself.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
This reverts commit bd4c86eaa6.
There is not user for kvm_mmu_isolate_page() any more.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
From Kukjin Kim:
This is redoing the s3c24xx irqs in a generic way by using a declarative
approach.
* 'next/irq-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C24XX: transform s3c2443 subirqs into new structure
ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
ARM: S3C24XX: move s3c2443 irq code to irq.c
ARM: S3C24XX: transform s3c2416 irqs into new structure
ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
ARM: S3C24XX: move s3c2416 irq init to common irq code
ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
ARM: S3C24XX: Move irq syscore-ops to irq-pm
ARM: S3C24XX: transform irq handling into a declarative form
Signed-off-by: Olof Johansson <olof@lixom.net>
- Sort out imx DEBUG_LL uart port selection
- A couple of imx_v6_v7_defconfig updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJREHAwAAoJEFBXWFqHsHzOONMIAK/w88b7mCNmwOgV+nEDZGfm
17rVGXZV4YdR4bpOFBdbMMddf16Yb5ENH5AHDwlYzr8zzZE0ODOjrQ5Pmk1aA9VR
EsJVIKpS9FnU6tvUIEnYPTK+PDkf44IW/bDb9BdbptVQmnWP/hTtYDcx7ruTSZx4
OK/Z9oz3Hwwl8+AfWh67tZ/nqJg7eugGwctM6IxMOH7dUCuJ5DALF9dYn3NCqC6b
oqkzbNpSdg2MicUINiMOEbQvoZfGgpC6CH/nWCSIjNWss0bbakpF5iqk0aU7+/0k
tNtbKFIAKgcHF4t0P0RyI6Qyt03tPBF2tUobuCEtwdBDT3jWFrkpUpImFLyE5+I=
=0R2N
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
imx soc changes for 3.9
- Sort out imx DEBUG_LL uart port selection
- A couple of imx_v6_v7_defconfig updates
* tag 'imx-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc
ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs
ARM: imx: use separated debug uart symbol for imx31 and imx35
ARM: imx_v6_v7_defconfig: Select IPUV3 driver
There is a missing break so we use XC_RF_MODE_CABLE instead of
XC_RF_MODE_AIR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Only enable it when we disable the display rather than
at DPMS time since enabling it requires a full modeset
to restore the display state. Fixes blank screens in
certain cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Remove em28xx_i2c_ir_work() and check the device type in the common callback
function em28xx_ir_work() instead. Simplifies em28xx_ir_start().
Reduces the code size with a minor performance drawback.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Set up the i2c_client locally in em28xx_i2c_ir_handle_key().
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We already have the key polling functions and the polling infrastructure in
em28xx-input, so we can easily get rid of the dependency on module ir-kbd-i2c.
For maximum safety, do not touch the key reporting mechanism for those devices.
Code size could be improved further but would have minor peformance impacts.
Tested with device "Terratec Cinergy 200 USB" (EM2800_BOARD_TERRATEC_CINERGY_200)
[mchehab@redhat.com: Fix two checkpatch.pl warnings:
ERROR: "foo * bar" should be "foo *bar" (line 465)
WARNING: kfree(NULL) is safe this check is probably not required (line 725)]
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We don't report any key/scan codes or errors inside the key polling functions
for internal IR RC devices, just in the key handling fucntions.
Do the same for external devices.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Field 'old' of struct IR_i2c is used nowhere in module ir-kbd-i2c.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Since 7c65fa2a4c
'staging: vt6656: Remove QWORD from source and replace with u64.'
a new sparse warning showed up:
'drivers/staging/vt6656/card.c:798:26: sparse: constant
0xffffffff00000000U is so big it is unsigned long'
-> Append L to fix the warning.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Forest Bond <forest@alittletooquiet.net>
Cc: Malcolm Priestley <tvboxspy@gmail.com>
Cc: "Justin P. Mattock" <justinmattock@gmail.com>
Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the default location to install acpidump into from /usr/bin
to /usr/sbin, as this tool needs to be run as root.
[rjw: Subject and changelog]
Signed-off-by: Thomas Renninger <trenn@suse.de>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
