Commit Graph

36 Commits

Author SHA1 Message Date
Michael S. Tsirkin
6457f126c8 virtio: support reserved vqs
virtio network device multiqueue support reserves
vq 3 for future use (useful both for future extensions and to make it
pretty - this way receive vqs have even and transmit - odd numbers).
Make it possible to skip initialization for
specific vq numbers by specifying NULL for name.
Document this usage as well as (existing) NULL callback.

Drivers using this not coded up yet, so I simply tested
with virtio-pci and verified that this patch does
not break existing drivers.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:15 +09:30
Jason Wang
17bb6d4088 virtio-ring: move queue_index to vring_virtqueue
Instead of storing the queue index in transport-specific virtio structs,
this patch moves them to vring_virtqueue and introduces an helper to get
the value.  This lets drivers simplify their management and tracing of
virtqueues.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 15:05:15 +09:30
Stratos Psomadakis
b6c96c0214 lguest: Make sure interrupt is allocated ok by lguest_setup_irq
Make sure the interrupt is allocated correctly by lguest_setup_irq (check the
return value of irq_alloc_desc_at for -ENOMEM)

Signed-off-by: Stratos Psomadakis <psomas@cslab.ece.ntua.gr>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleanups and commentry)
2012-01-12 15:44:47 +10:30
Rusty Russell
7b21e34fd1 virtio: harsher barriers for rpmsg.
We were cheating with our barriers; using the smp ones rather than the
real device ones.  That was fine, until rpmsg came along, which is
used to talk to a real device (a non-SMP CPU).

Unfortunately, just putting back the real barriers (reverting
d57ed95d) causes a performance regression on virtio-pci.  In
particular, Amos reports netbench's TCP_RR over virtio_net CPU
utilization increased up to 35% while throughput went down by up to
14%.

By comparison, this branch is in the noise.

Reference: https://lkml.org/lkml/2011/12/11/22

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:42 +10:30
Rick Jones
66846048f5 enable virtio_net to return bus_info in ethtool -i consistent with emulated NICs
Add a new .bus_name to virtio_config_ops then modify virtio_net to
call through to it in an ethtool .get_drvinfo routine to report
bus_info in ethtool -i output which is consistent with other
emulated NICs and the output of lspci.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:26:46 -05:00
Paul Gortmaker
39a0e33da0 lguest: add export.h to lguest files for THIS_MODULE/EXPORT_SYMBOL
We need this in advance of the module.h cleanup, or we'll
get compile errors like this:

  CC      drivers/lguest/lguest_device.o
drivers/lguest/lguest_device.c: In function ‘lguest_devices_init’:
drivers/lguest/lguest_device.c:490: error: ‘THIS_MODULE’ undeclared (first use in this function)

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:13 -04:00
Rusty Russell
3c3ed482dc lguest: Simplify device initialization.
We used to notify the Host every time we updated a device's status.  However,
it only really needs to know when we're resetting the device, or failed to
initialize it, or when we've finished our feature negotiation.

In particular, we used to wait for VIRTIO_CONFIG_S_DRIVER_OK in the
status byte before starting the device service threads.  But this
corresponds to the successful finish of device initialization, which
might (like virtio_blk's partition scanning) use the device.  So we
had a hack, if they used the device before we expected we started the
threads anyway.

Now we hook into the finalize_features hook in the Guest: at that
point we tell the Launcher that it can rely on the features we have
acked.  On the Launcher side, we look at the status at that point, and
start servicing the device.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-22 14:39:49 +09:30
Rusty Russell
091ebf07a2 lguest: stop using KVM hypercall mechanism
This is a partial revert of 4cd8b5e2a1 "lguest: use KVM hypercalls";
we revert to using (just as questionable but more reliable) int $15 for
hypercalls.  I didn't revert the register mapping, so we still use the
same calling convention as kvm.

KVM in more recent incarnations stopped injecting a fault when a guest
tried to use the VMCALL instruction from ring 1, so lguest under kvm
fails to make hypercalls.  It was nice to share code with our KVM
cousins, but this was overreach.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Matias Zabaljauregui <zabaljauregui@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
2010-04-14 21:43:56 +09:30
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Rusty Russell
1842f23c05 lguest and virtio: cleanup struct definitions to Linux style.
I've been doing this for years, and akpm picked me up on it about 12
months ago.  lguest partly serves as example code, so let's do it Right.

Also, remove two unused fields in struct vblk_info in the example launcher.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
2009-07-30 16:03:46 +09:30
Rusty Russell
a91d74a3c4 lguest: update commentry
Every so often, after code shuffles, I need to go through and unbitrot
the Lguest Journey (see drivers/lguest/README).  Since we now use RCU in
a simple form in one place I took the opportunity to expand that explanation.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
2009-07-30 16:03:46 +09:30
Rusty Russell
2e04ef7691 lguest: fix comment style
I don't really notice it (except to begrudge the extra vertical
space), but Ingo does.  And he pointed out that one excuse of lguest
is as a teaching tool, it should set a good example.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
2009-07-30 16:03:45 +09:30
Michael S. Tsirkin
d2a7ddda9f virtio: find_vqs/del_vqs virtio operations
This replaces find_vq/del_vq with find_vqs/del_vqs virtio operations,
and updates all drivers. This is needed for MSI support, because MSI
needs to know the total number of vectors upfront.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ lguest/9p compile fixes)
2009-06-12 22:16:36 +09:30
Rusty Russell
9499f5e7ed virtio: add names to virtqueue struct, mapping from devices to queues.
Add a linked list of all virtqueues for a virtio device: this helps for
debugging and is also needed for upcoming interface change.

Also, add a "name" field for clearer debug messages.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:16:36 +09:30
Matias Zabaljauregui
4cd8b5e2a1 lguest: use KVM hypercalls
Impact: cleanup

This patch allow us to use KVM hypercalls

Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-30 21:55:24 +10:30
Rusty Russell
6db6a5f3ae lguest: fix for CONFIG_SPARSE_IRQ=y
Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y

We now need to call irq_to_desc_alloc_cpu() before
set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no
kmalloc available).

So do it as we use interrupts instead.  Also means we only alloc for
irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
2009-03-09 10:06:29 +10:30
Mark McLoughlin
ff8561c4ad lguest: do not statically allocate root device
We shouldn't be statically allocating the root device object,
so dynamically allocate it using root_device_register()
instead.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:34 -08:00
Mark McLoughlin
bda53cd510 lguest: struct device - replace bus_id with dev_name()
bus_id is gradually being removed, so use dev_name() instead.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30 09:26:12 +10:30
Rusty Russell
87c7d57c17 virtio: hand virtio ring alignment as argument to vring_new_virtqueue
This allows each virtio user to hand in the alignment appropriate to
their virtio_ring structures.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-12-30 09:26:03 +10:30
Rusty Russell
2966af73e7 virtio: use LGUEST_VRING_ALIGN instead of relying on pagesize
This doesn't really matter, since lguest is i386 only at the moment,
but we could actually choose a different value.  (lguest doesn't have
a guarenteed ABI).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30 09:26:02 +10:30
Rusty Russell
1dc3e3bcbf lguest: update commentry
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-08-26 00:19:28 +10:00
Rusty Russell
e34f872567 virtio: Add transport feature handling stub for virtio_ring.
To prepare for virtio_ring transport feature bits, hook in a call in
all the users to manipulate them.  This currently just clears all the
bits, since it doesn't understand any features.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25 12:06:14 +10:00
Rusty Russell
c624896e48 virtio: Rename set_features to finalize_features
Rather than explicitly handing the features to the lower-level, we just
hand the virtio_device and have it set the features.  This make it clear
that it has the chance to manipulate the features of the device at this
point (and that all feature negotiation is already done).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25 12:06:12 +10:00
Rusty Russell
b769f57908 virtio: set device index in common code.
Anthony Liguori points out that three different transports use the virtio code,
but each one keeps its own counter to set the virtio_device's index field.  In
theory (though not in current practice) this means that names could be
duplicated, and that risk grows as more transports are created.

So we move the selection of the unique virtio_device.index into the common code
in virtio.c, which has the side-benefit of removing duplicate code.

The only complexity is that lguest and S/390 use the index to uniquely identify
the device in case of catastrophic failure before register_virtio_device() is
called: now we use the offset within the descriptor page as a unique identifier
for the printks.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Lalancette <clalance@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
2008-05-30 15:09:42 +10:00
Rusty Russell
e27810f113 lguest: use ioremap_cache, not ioremap
Thanks to Jon Corbet & LWN.  Only took me a day to join the dots.

Host->Guest netcat before (with unnecessily large receive buffers):
1073741824 bytes (1.1 GB) copied, 24.7528 seconds, 43.4 MB/s

After:
1073741824 bytes (1.1 GB) copied, 17.6369 seconds, 60.9 MB/s

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-30 15:09:41 +10:00
Rusty Russell
a007a751d9 lguest: make Launcher see device status updates
This brings us closer to Real Life, where we'd examine the device
features once it's set the DRIVER_OK status bit.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:54 +10:00
Rusty Russell
c45a6816c1 virtio: explicit advertisement of driver features
A recent proposed feature addition to the virtio block driver revealed
some flaws in the API: in particular, we assume that feature
negotiation is complete once a driver's probe function returns.

There is nothing in the API to require this, however, and even I
didn't notice when it was violated.

So instead, we require the driver to specify what features it supports
in a table, we can then move the feature negotiation into the virtio
core.  The intersection of device and driver features are presented in
a new 'features' bitmap in the struct virtio_device.

Note that this highlights the difference between Linux unsigned-long
bitmaps where each unsigned long is in native endian, and a
straight-forward little-endian array of bytes.

Drivers can still remove feature bits in their probe routine if they
really have to.

API changes:
- dev->config->feature() no longer gets and acks a feature.
- drivers should advertise their features in the 'feature_table' field
- use virtio_has_feature() for extra sanity when checking feature bits

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:50 +10:00
Rusty Russell
a6bd8e1303 lguest: comment documentation update.
Took some cycles to re-read the Lguest Journey end-to-end, fix some
rot and tighten some phrases.

Only comments change.  No new jokes, but a couple of recycled old jokes.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-03-28 11:05:54 +11:00
Alexey Dobriyan
25478445c4 Fix container_of() usage
Using "attr" twice is not OK, because it effectively prohibits such
container_of() on variables not named "attr".

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:32 -08:00
Rusty Russell
6e5aa7efb2 virtio: reset function
A reset function solves three problems:

1) It allows us to renegotiate features, eg. if we want to upgrade a
   guest driver without rebooting the guest.

2) It gives us a clean way of shutting down virtqueues: after a reset,
   we know that the buffers won't be used by the host, and

3) It helps the guest recover from messed-up drivers.

So we remove the ->shutdown hook, and the only way we now remove
feature bits is via reset.

We leave it to the driver to do the reset before it deletes queues:
the balloon driver, for example, needs to chat to the host in its
remove function.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:03 +11:00
Rusty Russell
18445c4d50 virtio: explicit enable_cb/disable_cb rather than callback return.
It seems that virtio_net wants to disable callbacks (interrupts) before
calling netif_rx_schedule(), so we can't use the return value to do so.

Rename "restart" to "cb_enable" and introduce "cb_disable" hook: callback
now returns void, rather than a boolean.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:49:58 +11:00
Rusty Russell
a586d4f601 virtio: simplify config mechanism.
Previously we used a type/len pair within the config space, but this
seems overkill.  We now simply define a structure which represents the
layout in the config space: the config space can now only be extended
at the end.

The main driver-visible changes:
1) We indicate what fields are present with an explicit feature bit.
2) Virtqueues are explicitly numbered, and not in the config space.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:49:57 +11:00
Rusty Russell
74b2553f1d virtio: fix module/device unloading
The virtio code never hooked through the ->remove callback.  Although
noone supports device removal at the moment, this code is already
needed for module unloading.

This of course also revealed bugs in virtio_blk, virtio_net and lguest
unloading paths.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-19 11:20:42 +11:00
Rusty Russell
42b36cc0ce virtio: Force use of power-of-two for descriptor ring sizes
The virtio descriptor rings of size N-1 were nicely set up to be
aligned to an N-byte boundary.  But as Anthony Liguori points out, the
free-running indices used by virtio require that the sizes be a power
of 2, otherwise we get problems on wrap (demonstrated with lguest).

So we replace the clever "2^n-1" scheme with a simple "align to page
boundary" scheme: this means that all virtio rings take at least two
pages, but it's safer than guessing cache alignment.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-12 13:59:40 +11:00
Rusty Russell
e1e72965ec lguest: documentation update
Went through the documentation doing typo and content fixes.  This
patch contains only comment and whitespace changes.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-25 15:02:50 +10:00
Rusty Russell
19f1537b7b Lguest support for Virtio
This makes lguest able to use the virtio devices.

We change the device descriptor page from a simple array to a variable
length "type, config_len, status, config data..." format, and
implement virtio_config_ops to read from that config data.

We use the virtio ring implementation for an efficient Guest <-> Host
virtqueue mechanism, and the new LHCALL_NOTIFY hypercall to kick the
host when it changes.

We also use LHCALL_NOTIFY on kernel addresses for very very early
console output.  We could have another hypercall, but this hack works
quite well.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:56 +10:00