It's been reported that the recent fix for skipping the
component-binding with D-GPU caused a regression on some systems; it
resulted in the completely missing component binding with i915 GPU.
The problem was the use of pci_get_class() function. It matches with
the full PCI class bits, while we want to match only partially the PCI
base class bits. So, when a system has an i915 graphics device with
the PCI class 0380, it won't hit because we're looking for only the
PCI class 0300.
This patch fixes i915_gfx_present() to look up each PCI device and
match with PCI base class explicitly instead of pci_get_class().
Fixes: c9db8a30d9 ("ALSA: hda/i915 - skip acomp init if no matching display")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1200611
Link: https://lore.kernel.org/r/87bkunztec.wl-tiwai@suse.de
Link: https://lore.kernel.org/r/20220621120044.11573-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616220559.136160-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UpExtreme BIOS reports microphones that are not physically
present, so this module ends-up selecting SOF, while the UpExtreme11
BIOS does not report microphones so the snd-hda-intel driver is
selected.
For consistency use SOF unconditionally in autodetection mode. The use
of the snd-hda-intel driver can still be enabled with
'options snd-intel-dspcfg dsp_driver=1'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616201029.130477-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the support of new Huawei codec HW8326. The HW8326 is developed
by Huawei with Realtek's IP Core, and it's compatible with ALC256.
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Link: https://lore.kernel.org/r/20220608082357.26898-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
pci_get_class() will already unref the pci device passed as argument.
So if it's unconditionally unref'ed, even if the loop is not stopped,
there will be one too many unref for each device not matched.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5701
Fixes: c9db8a30d9 ("ALSA: hda/i915 - skip acomp init if no matching display")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220416064418.2364582-1-lucas.demarchi@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In systems with only a discrete i915 GPU, the acomp init will
always timeout for the PCH HDA controller instance.
Avoid the timeout by checking the PCI device hierarchy
whether any display class PCI device can be found on the system,
and at the same level as the HDA PCI device. If found, proceed
with the acomp init, which will wait until i915 probe is complete
and component binding can proceed. If no matching display
device is found, the audio component bind can be safely skipped.
The bind timeout will still be hit if the display is present
in the system, but i915 driver does not bind to it by configuration
choice or probe error. In this case the 60sec timeout will be
hit.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20220405123622.2874457-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4aDoACgkQJNaLcl1U
h9BPKgf/XSKCt67IzrbnI9UXp1Q13C54z57e+nGr4LBSRraT/WwdXFevefC6JZDq
bYQWhigFrQyyYSyxVJYIvtywXXpMzJ1ypzHqcBGmqCufoX0zoaRwTFYg60yiYqdy
cDsX82/1bhI9Dp3RWaEKaMyaa9FI0Kr3WTA6EKdo592u0hxj4UcK51r7qsp1JpsR
tQWGMYqqwtajhamFgrIlKiJDDVnv2qEhrWdho5W/FPAby+fsJ6VJBMhwEx/F7cXu
Mjfa0k2MoMAlNX9DxtIHweVECaN32HJsytrbgUAdYnBoGaZNkXwLwvyp9RIeDAMP
NZ+w3lwFLw1N8S2ho6kqtDpO+tJU0Q==
=Y6/E
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.18
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
If kernel is built with hung task detection enabled and
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT set to less than 60 seconds,
snd_hdac_i915_init() will trigger the hung task timeout in case i915 is
not available and taint the kernel.
Use wait_for_completion_killable_timeout() for the wait to
avoid this problem.
Co-developed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://lore.kernel.org/r/20220309182439.1053856-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We're missing this check for the CNL PCI id
Reported-by: Nikolai Kostrigin <nickel@altlinux.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220308192610.392950-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We only saw ESSX8336 so far, but now with reports of 'ESSX8326' we
need to expand to a full list. Let's reuse the 'snd_soc_acpi_codecs'
structure to store the information.
Reported-by: anthony tonitch <d.tonitch@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220308192610.392950-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The NHLT information can be used to figure out which SSPs are enabled
in a platform.
The 'SSP' link type is too broad for machine drivers, since it can
cover the Bluetooth sideband and the analog audio codec connections,
so this helper exposes a parameter to filter with the device
type (DEVICE_I2S refers to analog audio codec in NHLT parlance).
The helper returns a mask, since more than one SSP may be used for
analog audio, e.g. the NHLT spec describes the use of SSP0 for
amplifiers and SSP1 for headset codec. Note that if more than one bit
is set, it's impossible to determine which SSP is connected to what
external component. Additional platform-specific information based on
e.g. DMI quirks would still be required in the machine driver to
configure the relevant dailinks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220308192610.392950-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch exposes a new helper to directly retrieve the link from the
codec address, and makes use of this helper when retrieving the link
from the codec name.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220214101404.4074026-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2828205.e9J7NaK4W3@kreacher
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Entries without dmi_table nor codec_hid field need to be placed after
entries with these two fields or they will be always selected.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220113105220.1114694-3-brent.lu@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add rules to select SOF driver for Jasper Lake systems if digital
microphone is present or the system is a Chromebook.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220113105220.1114694-2-brent.lu@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add HD Audio PCI ID for a variant of Intel AlderLake-P. Use same driver
match rules as for existing AlderLake-P devices.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211223073424.1738125-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add HD Audio PCI ID for Intel AlderLake-N. Add rules to
snd_intel_dsp_find_config() to choose DSP-based SOF driver for ADL-N
systems with PCH-DMIC or Soundwire codecs, and plain HDA driver for the
rest (DSP not used).
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211223073424.1738125-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing code maximizes confusion by using 'stream' and 'hstream'
variables of different types. Examples:
struct hdac_stream *stream;
struct hdac_ext_stream *stream;
struct hdac_stream *hstream;
struct hdac_ext_stream *hstream;
with some additional copy/paste remains:
struct hdac_ext_stream *azx_dev;
This patch suggests a consistent naming across all 'hdac_ext_stream'
functions. The convention is:
struct hdac_stream *hstream;
struct hdac_ext_stream *hext_stream;
No functionality change - just renaming of variables and more
consistent indentation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20211216231128.344321-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_ext_stop_streams() has really nothing to do with the
extension, it just loops over the bus streams.
Move it to the hdac_stream layer and rename to remove the 'ext'
prefix and add the precision that the chip will also be stopped.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211216231128.344321-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the HDAS ACPI scope, the SoundWire may not be the direct child of HDAS.
It needs to go through the ACPI table at max depth of 2 to find the
SoundWire device from HDAS.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211221010817.23636-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing code currently sets a pointer to an ACPI handle before
checking that it's actually a SoundWire controller. This can lead to
issues where the graph walk continues and eventually fails, but the
pointer was set already.
This patch changes the logic so that the information provided to
the caller is set when a controller is found.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211221010817.23636-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDA uses a timecounter to read a hardware clock running at 24 MHz. The
conversion factor is set with a mult value of 125 and a shift value of 0,
which is not converting the hardware clock to nanoseconds, it is converting
to 1/3 nanoseconds because the conversion factor from 24Mhz to nanoseconds
is 125/3. The usage sites divide the "nanoseconds" value returned by
timecounter_read() by 3 to get a real nanoseconds value.
There is a lengthy comment in azx_timecounter_init() explaining this
choice. That comment makes blatantly wrong assumptions about how
timecounters work and what can overflow.
The comment says:
* Applying the 1/3 factor as part of the multiplication
* requires at least 20 bits for a decent precision, however
* overflows occur after about 4 hours or less, not a option.
timecounters operate on time deltas between two readouts of a clock and use
the mult/shift pair to calculate a precise nanoseconds value:
delta_nsec = (delta_clock * mult) >> shift;
The fractional part is also taken into account and preserved to prevent
accumulated rounding errors. For details see cyclecounter_cyc2ns().
The mult/shift pair has to be chosen so that the multiplication of the
maximum expected delta value does not result in a 64bit overflow. As the
counter wraps around on 32bit, the maximum observable delta between two
reads is (1 << 32) - 1 which is about 178.9 seconds.
That in turn means the maximum multiplication factor which fits into an u32
will not cause a 64bit overflow ever because it's guaranteed that:
((1 << 32) - 1) ^ 2 < (1 << 64)
The resulting correct multiplication factor is 2796202667 and the shift
value is 26, i.e. 26 bit precision. The overflow of the multiplication
would happen exactly at a clock readout delta of 6597069765 which is way
after the wrap around of the hardware clock at around 274.8 seconds which
is off from the claimed 4 hours by more than an order of magnitude.
If the counter ever wraps around the last read value then the calculation
is off by the number of wrap arounds times 178.9 seconds because the
overflow cannot be observed.
Use clocks_calc_mult_shift(), which calculates the most accurate mult/shift
pair based on the given clock frequency, and remove the bogus comment along
with the divisions at the readout sites.
Fixes: 5d890f591d ("ALSA: hda: support for wallclock timestamps")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/871r35kwji.ffs@tglx
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.
We previously added support for other Intel platforms but missed
JasperLake.
BugLink: https://github.com/thesofproject/linux/issues/3210
Fixes: 9d36ceab94 ('ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027023254.24955-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is an unusually large set of updates, mostly a large crop of
unusually big drivers coupled with extensive overhauls of existing code.
There's a SH change here for the DAI format terminology, the change is
straightforward and the SH maintainers don't seem very active.
- A new version of the audio graph card which supports a wider range of
systems.
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs.
- Several conversions to YAML DT bindings.
- Continuing cleanups to the SOF and Intel code.
- A very big overhaul of the cs42l42 driver, correcting many problems.
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF/+i8ACgkQJNaLcl1U
h9AWiAf+OoukOIBspXW3hoa7gfAhiP1bEpaforZaz0grYDT8IGBwO01JTe3qlHM2
KLSi1k97Y33aVPjIox6ynJ9EJ+OwGfHujqFCeI1jm+QRnOCAqQx8oHaKCMzbvUpk
rFhok4xR5XMR6NZUGQVtp5cv903r32mb0Prxvp6CXeGc6HZxcjAMYsGRBPcQoprN
FCkiTf1qxrNQl2UmRsf8rDQmHiHpnGjiUpIUrtY9wvZGE3EQzfhQ3r1TAw7AVMmC
YDQxjU/KftW2zTgXx+mGtu1iX0OMUBo/W8oR9RjIUUIkyA6CllScBOvQIgp9EU18
PZPIEsyuC9zwcxHb7bPXx5E9vRsY7A==
=/NwC
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.16
This is an unusually large set of updates, mostly a large crop of
unusually big drivers coupled with extensive overhauls of existing code.
There's a SH change here for the DAI format terminology, the change is
straightforward and the SH maintainers don't seem very active.
- A new version of the audio graph card which supports a wider range of
systems.
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs.
- Several conversions to YAML DT bindings.
- Continuing cleanups to the SOF and Intel code.
- A very big overhaul of the cs42l42 driver, correcting many problems.
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
A back-merge of 5.15 branch into 5.16-devel branch for further
development of USB and ALSA core stuff that depends on 5.15 fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_hdac_bus_reset_link() contains logic to clear STATESTS register
before performing controller reset. This code dates back to an old
bugfix in commit e8a7f136f5 ("[ALSA] hda-intel - Improve HD-audio
codec probing robustness"). Originally the code was added to
azx_reset().
The code was moved around in commit a41d122449 ("ALSA: hda - Embed bus
into controller object") and ended up to snd_hdac_bus_reset_link() and
called primarily via snd_hdac_bus_init_chip().
The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is
called when controller is not in reset. In this case, STATESTS can be
cleared. This can be useful e.g. when forcing a controller reset to retry
codec probe. A normal non-power-on reset will not clear the bits.
However, this old logic is problematic when controller is already in
reset. The HDA specification states that controller must be taken out of
reset before writing to registers other than GCTL.CRST (1.0a spec,
3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost
if the controller is already in reset per the HDA specification mentioned.
This has been harmless on older hardware. On newer generation of Intel
PCIe based HDA controllers, if configured to report issues, this write
will emit an unsupported request error. If ACPI Platform Error Interface
(APEI) is enabled in kernel, this will end up to kernel log.
Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if
the function is called when controller is not in reset. Otherwise
clearing the bits is not possible and should be skipped.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.
Co-developed-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code for hdac_ext_stream seems inherited from hdac_stream, and
similar locking issues are present: the use of the bus->reg_lock
spinlock is inconsistent, with only writes to specific fields being
protected.
Apply similar fix as in hdac_stream by protecting all accesses to
'link_locked' and 'decoupled' fields, with a new helper
snd_hdac_ext_stream_decouple_locked() added to simplify code
changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210924192417.169243-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fields 'opened', 'running', 'assigned_key' are all protected by a
spinlock, but the spinlock is not taken when looking for a
stream. This can result in a possible race between assign() and
release().
Fix by taking the spinlock before walking through the bus stream list.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210924192417.169243-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add HD Audio PCI ID for Intel AlderLake-M. Add rules to
snd_intel_dsp_find_config() to choose SOF driver for ADL-M systems with
PCH-DMIC or Soundwire codecs, and legacy driver for the rest.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210528185123.48332-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmBjRuQOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9ZQw/6Ao2X1io4TVnyO/gO8HtwmnZ6TWcrLUlySaep
H6Suf0RHsOQO9VOaMcUarA3Wnz1vZ44qJ/fkdLTslnIPGSRJDUx15bbb+n2N6pQJ
gS7Umxy6n73rQyEoDjd3ZorvDGjFSVFpjM+RYjk/Ohq+yziz7nQ/SZuHPPeqm1GU
C5d9SxyXGdqlJJ6yFCHzbtjSmIey+l1TZ+j3rSSww/CzDKxB2l5J6JZAMUjVdL9b
J80Mcw0XLdG9iTtEnkUt3TwvLMcMl95UPeQHIkVQlwsRRb3BtHNIwJLPQ/n+Cou7
Hre3y2miUYHrNICEzMdMlpDzQBqu5wvpXgbgIV0CwAwCXPZBVWE1hVJ9gG0l+r1G
fy1a75OmEin4V9g8w+wNTWDEgjwAOkWhA67WVjpbvHtd6kEbISzt4JHFksG1rjU2
vXOIj2VBmQN6zHtxfcZqY8Ge4A7XGo7tAM/3NsUxin+2y7ZXI6sDvv+0esYmqrYr
9as/tD84L5LTrbUYewaUgEdauQXluQI1egRi7pSeg7hZyLeYYkmszk54Ra3zdlmM
m7Hr6u+Y/G7yeFdn/WdeG3VzdmxhC2ZFfk3gq0vneBS3WrATbf6nAORp2bwzGSz4
pUsVLSv+vhpZdSF+IxpUuMnsLkkbUCvFivXLjQ6irSWvp7uts1HWdRowdg7Pe2lC
FVbFRuA=
=1uM7
-----END PGP SIGNATURE-----
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit f8e4ae10de ("ALSA: hda: Allow setting
preallocation again for x86").
The reverted commit itself is a revert of c31427d0d2 ("ALSA: hda: No
preallocation on x86 platforms"). It was needed because HDA allowed very
big allocations, up to 1GB per stream. However as previous commit in
this series changes maximum allowed allocation per stream to 4MB, we can
safely revert it back.
On systems where there are a lot of FrontEnds, when
CONFIG_SND_HDA_PREALLOC_SIZE != 0 ALSA core allocates memory for each
FE, which may cause out of memory problems due to per card limit. Force
config to 0 on X86, so memory will be allocated on as needed basis.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=201251#c322
Suggested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20210318160618.2504068-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some Lenovo systems if the microphone is disabled in the BIOS
only the NHLT table header is created, with no data. This means
the endpoints field is not correctly set to zero - leading to an
unintialised variable and hence invalid descriptors are parsed
leading to page faults.
The Lenovo firmware team is addressing this, but adding a check
preventing invalid tables being parsed is worthwhile.
Tested on a Lenovo T14.
Tested-by: Philipp Leskovitz <philipp.leskovitz@secunet.com>
Reported-by: Philipp Leskovitz <philipp.leskovitz@secunet.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302141003.7342-1-markpearson@lenovo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In January, Intel kbuild bot and Arnd Bergmann reported multiple
issues with randconfig. This patchset builds on Arnd's suggestions to
a) expose ACPI and PCI devices in separate modules, while sof-acpi-dev
and sof-pci-dev become helpers. This will result in minor changes
required for developers/testers, i.e. modprobe snd-sof-pci will no
longer result in a probe. The SOF CI was already updated to deal with
this module dependency change and introduction of new modules.
b) Fix SOF/SoundWire/DSP_config dependencies by moving the code
required to detect SoundWire presence in ACPI tables to sound/hda.
Link: https://lore.kernel.org/r/20210302003125.1178419-1-pierre-louis.bossart@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=ttBB
-----END PGP SIGNATURE-----
Merge tag 'tags/sound-sdw-kconfig-fixes' into for-linus
ALSA/ASoC/SOF/SoundWire: fix Kconfig issues
In January, Intel kbuild bot and Arnd Bergmann reported multiple
issues with randconfig. This patchset builds on Arnd's suggestions to
a) expose ACPI and PCI devices in separate modules, while sof-acpi-dev
and sof-pci-dev become helpers. This will result in minor changes
required for developers/testers, i.e. modprobe snd-sof-pci will no
longer result in a probe. The SOF CI was already updated to deal with
this module dependency change and introduction of new modules.
b) Fix SOF/SoundWire/DSP_config dependencies by moving the code
required to detect SoundWire presence in ACPI tables to sound/hda.
Link: https://lore.kernel.org/r/20210302003125.1178419-1-pierre-louis.bossart@linux.intel.com
We rely on implicit includes, list out explicitly what this code
relies on.
Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210302003125.1178419-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ACPI scan capabilities is called from the intel-dspconfig as well
as the SOF/HDaudio drivers. This creates dependencies and randconfig issues
when HDaudio and SOF/SoundWire are not all configured as modules.
To simplify Kconfig dependencies between HDAudio, SoundWire, SOF and
intel-dspconfig, move the ACPI scan helpers to a dedicated
module. This follows the same idea as NHLT helpers which are already
handled as a dedicated module.
The only functional change is that the kernel parameter to filter
links is now handled by a different module, but that was only provided
for developers needing work-arounds for early BIOS releases.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210302003125.1178419-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Multiple bug reports report issues with the SOF and SST drivers when
dealing with single microphone cases.
We currently read the DMIC array information unconditionally but we
don't check that the configuration type is actually a mic array.
When the DMIC link does not rely on a mic array configuration, the
recommendation is to check the format information to infer the maximum
number of channels, and map this to the number of microphones.
This leaves a potential for a mismatch between actual microphones
available in hardware and what the ACPI table contains, but we have no
other source of information.
Note that single microphone configurations can alternatively be
handled with a 'mic array' configuration along with a 'vendor-defined'
geometry.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201251
BugLink: https://github.com/thesofproject/linux/issues/2725
Fixes: 7a33ea70e1 ('ALSA: hda: intel-nhlt: handle NHLT VENDOR_DEFINED DMIC geometry')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210302000146.1177770-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
v5.12-rc1 flags new warnings with make W=1, fix missing or broken
function descriptors.
sound/pci/hda/hda_codec.c:3492: warning: expecting prototype for
snd_hda_input_mux_info_info(). Prototype was for
snd_hda_input_mux_info() instead
sound/pci/hda/hda_codec.c:3521: warning: expecting prototype for
snd_hda_input_mux_info_put(). Prototype was for
snd_hda_input_mux_put() instead
sound/pci/hda/hda_codec.c:3958: warning: expecting prototype for
_snd_hda_pin_ctl(). Prototype was for _snd_hda_set_pin_ctl() instead
sound/pci/hda/hda_jack.c:223: warning: expecting prototype for
snd_hda_set_dirty_all(). Prototype was for
snd_hda_jack_set_dirty_all() instead
sound/pci/hda/hda_jack.c:309: warning: expecting prototype for
snd_hda_jack_detect_enable_mst(). Prototype was for
snd_hda_jack_detect_enable_callback_mst() instead
sound/pci/hda/hda_generic.c:3933: warning: expecting prototype for
snd_dha_gen_add_mute_led_cdev(). Prototype was for
snd_hda_gen_add_mute_led_cdev() instead
sound/pci/hda/hda_generic.c:4093: warning: expecting prototype for
snd_dha_gen_add_micmute_led_cdev(). Prototype was for
snd_hda_gen_add_micmute_led_cdev() instead
sound/pci/hda/patch_ca0132.c:2357: warning: expecting prototype for
Prepare and send the SCP message to DSP(). Prototype was for
dspio_scp() instead
sound/pci/hda/patch_ca0132.c:2883: warning: expecting prototype for
Allocate router ports(). Prototype was for dsp_allocate_router_ports()
instead
sound/pci/hda/patch_ca0132.c:3202: warning: expecting prototype for
Write a block of data into DSP code or data RAM using pre(). Prototype
was for dspxfr_one_seg() instead
sound/pci/hda/patch_ca0132.c:3397: warning: expecting prototype for
data overlay to DSP memories(). Prototype was for dspxfr_image()
instead
sound/hda/hdac_regmap.c:393: warning: expecting prototype for
snd_hdac_regmap_init(). Prototype was for snd_hdac_regmap_exit()
instead
sound/hda/ext/hdac_ext_controller.c:142: warning: expecting prototype
for snd_hdac_ext_bus_get_link_index(). Prototype was for
snd_hdac_ext_bus_get_link() instead
sound/hda/ext/hdac_ext_stream.c:140: warning: expecting prototype for
snd_hdac_ext_linkstream_start(). Prototype was for
snd_hdac_ext_link_stream_start() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210301174617.116960-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add rules to select SOF driver for Alder Lake systems if a digital
microphone or SoundWire codecs are present in the system. This is
following same rules as for older Tiger Lake systems.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Xiuli Pan <xiuli.pan@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210210111310.2227417-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The kernel has 2 drivers for the Low Power Engine audio-block on
Bay- and Cherry-Trail SoCs. The old SST driver and the new SOF
driver. If both drivers are enabled then the kernel will default
to using the old SST driver, unless told otherwise through the
snd_intel_dspcfg.dsp_driver module-parameter.
Add a boolean SND_INTEL_BYT_PREFER_SOF Kconfig option, which when set to Y
will make the kernel default to the new SOF driver instead.
The option defaults to n, preserving the current behavior.
Making this configurable will help distributions such as Fedora:
https://fedoraproject.org/w/index.php?title=Changes/SofDefaultForIntelLpe
to test using SOF on BYT/CHT during the transition phase where we
have both drivers (eventually the old driver and this option will
be removed).
Note that this drops the acpi_config_table[] containing 2 entries per ACPI
hardware-id if both drivers are enabled. snd_intel_acpi_dsp_find_config()
will always return the first hit, so we only need a single entry with the
flags value set depending on the Kconfig settings.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208135919.135600-1-hdegoede@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The extended HDA bus (hdac_ext) provides interfaces for more
fine-grained control of individual links than what plain HDA
provides for. Links can be powered off when they are not used and if
all links are released, controller can shut down the command DMA.
These interfaces are currently not used by common HDA codec drivers.
When a HDA codec is runtime suspended, it calls snd_hdac_codec_link_down(),
but there is no link to the HDA extended bus, and on controller side
the links are shut down only when all codecs are suspended.
This patch adds link_power() to hdac_bus ops. Controllers using the HDA
extended core, can use this to plug in snd_hdac_ext_bus_link_power() to
implement more fine-grained control of link power.
No change is needed for plain HDA controllers nor to existing HDA
codec drivers.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210205184630.1938761-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
