Michal Kalderon reports a BUG that occurs just after device removal:
[ 169.112490] rpcrdma: removing device qedr0 for 192.168.110.146:20049
[ 169.143909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[ 169.181837] IP: rpcrdma_dma_unmap_regbuf+0xa/0x60 [rpcrdma]
The RPC/RDMA client transport attempts to allocate some resources
on demand. Registered buffers are one such resource. These are
allocated (or re-allocated) by xprt_rdma_allocate to hold RPC Call
and Reply messages. A hardware resource is associated with each of
these buffers, as they can be used for a Send or Receive Work
Request.
If a device is removed from under an NFS/RDMA mount, the transport
layer is responsible for releasing all hardware resources before
the device can be finally unplugged. A BUG results when the NFS
mount hasn't yet seen much activity: the transport tries to release
resources that haven't yet been allocated.
rpcrdma_free_regbuf() already checks for this case, so just move
that check to cover the DEVICE_REMOVAL case as well.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd031866 ("xprtrdma: Support unplugging an HCA ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 16f906d66c ("xprtrdma: Reduce required number of send
SGEs") introduced the rpcrdma_ia::ri_max_send_sges field. This fixes
a problem where xprtrdma would not work if the device's max_sge
capability was small (low single digits).
At least RPCRDMA_MIN_SEND_SGES are needed for the inline parts of
each RPC. ri_max_send_sges is set to this value:
ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES;
Then when marshaling each RPC, rpcrdma_args_inline uses that value
to determine whether the device has enough Send SGEs to convey an
NFS WRITE payload inline, or whether instead a Read chunk is
required.
More recently, commit ae72950abf ("xprtrdma: Add data structure to
manage RDMA Send arguments") used the ri_max_send_sges value to
calculate the size of an array, but that commit erroneously assumed
ri_max_send_sges contains a value similar to the device's max_sge,
and not one that was reduced by the minimum SGE count.
This assumption results in the calculated size of the sendctx's
Send SGE array to be too small. When the array is used to marshal
an RPC, the code can write Send SGEs into the following sendctx
element in that array, corrupting it. When the device's max_sge is
large, this issue is entirely harmless; but it results in an oops
in the provider's post_send method, if dev.attrs.max_sge is small.
So let's straighten this out: ri_max_send_sges will now contain a
value with the same meaning as dev.attrs.max_sge, which makes
the code easier to understand, and enables rpcrdma_sendctx_create
to calculate the size of the SGE array correctly.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: 16f906d66c ("xprtrdma: Reduce required number of send SGEs")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The common case: There are 13 to 14 actions per RPC, and tk_callback
is non-NULL in only one of them. There's no need to store a NULL in
the tk_callback field during each FSM step.
This slightly improves throughput results in dbench and other multi-
threaded benchmarks on my two-socket client on 56Gb InfiniBand, but
will probably be inconsequential on slower systems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This shows up in every RPC:
kworker/4:1-19772 [004] 3467.373443: rpc_task_run_action: task:4711@2 flags=0e81 state=0005 status=0 action=call_status
kworker/4:1-19772 [004] 3467.373444: rpc_task_run_action: task:4711@2 flags=0e81 state=0005 status=0 action=call_status
What's actually going on is that the first iteration of the RPC
scheduler is invoking the function in tk_callback (in this case,
xprt_timer), then invoking call_status on the next iteration.
Feeding do_action, rather than tk_action, to the "task_run_action"
trace point will now always display the correct FSM step.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Make it easier to use text search when browsing a trace
report. Other events use "status=%d".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Track RPC timeouts: report the XID and the server address to match
the content of network capture.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix kernel-doc warnings in net/sunrpc/xprtrdma/ .
net/sunrpc/xprtrdma/verbs.c:1575: warning: No description found for parameter 'count'
net/sunrpc/xprtrdma/verbs.c:1575: warning: Excess function parameter 'min_reqs' description in 'rpcrdma_ep_post_extra_recv'
net/sunrpc/xprtrdma/backchannel.c:288: warning: No description found for parameter 'r_xprt'
net/sunrpc/xprtrdma/backchannel.c:288: warning: Excess function parameter 'xprt' description in 'rpcrdma_bc_receive_call'
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The contents of seg->mr_len changed when ->ro_map stopped returning
the full chunk length in the first segment. Count the full length of
each Write chunk, not the length of the first segment (which now can
only be as large as a page).
Fixes: 9d6b040978 ("xprtrdma: Place registered MWs on a ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This includes decoding Write and Reply chunks, and fixing up inline
payloads.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These can be shared with all kernel ULPs, and more can easily be
added as needed.
Note: checkpatch.pl has some heartburn with the TRACE_DEFINE_ENUM
macros and the LIST macros. These follow the same style as other
header files under include/tracing/events , thus should be
considered acceptable exceptions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Code review suggested that a common bit of code can be
placed into a helper function, and this gives us fewer places to
stick an "I DMA unmapped something" trace point.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: struct rpcrdma_mw was named after Memory Windows, but
xprtrdma no longer supports a Memory Window registration mode.
Rename rpcrdma_mw and its fields to reduce confusion and make
the code more sensible to read.
Renaming "mw" was suggested by Tom Talpey, the author of the
original xprtrdma implementation. It's a good idea, but I haven't
done this until now because it's a huge diffstat for no benefit
other than code readability.
However, I'm about to introduce static trace points that expose
a few of xprtrdma's internal data structures. They should make sense
in the trace report, and it's reasonable to treat trace points as a
kernel API contract which might be difficult to change later.
While I'm churning things up, two additional changes:
- rename variables unhelpfully called "r" to "mr", to improve code
clarity, and
- rename the MR-related helper functions using the form
"rpcrdma_mr_<verb>", to be consistent with other areas of the
code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Over time, the industry has adopted the term "frwr"
instead of "frmr". The term "frwr" is now more widely recognized.
For the past couple of years I've attempted to add new code using
"frwr" , but there still remains plenty of older code that still
uses "frmr". Replace all usage of "frmr" to avoid confusion.
While we're churning code, rename variables unhelpfully called "f"
to "frwr", to improve code clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
No need for the overhead of atomically setting and clearing this bit
flag for every use of a pre-allocated backchannel rpc_rqst. These
are a distinct pool of rpc_rqsts that are used only for callback
operations, so it is safe to simply leave the bit set.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. @rqst is set up differently for backchannel Replies. For
example, rqst->rq_task and task->tk_client are both NULL. So it is
easier to understand and maintain this code path if it is separated.
Also, we can get rid of the confusing rl_connect_cookie hack in
rpcrdma_bc_receive_call.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit 5a6d1db455 ("SUNRPC: Add a transport-specific private
field in rpc_rqst"), the rpc_rqst's for RPC-over-RDMA backchannel
operations leave rq_buffer set to NULL.
xprt_release does not invoke ->op->buf_free when rq_buffer is NULL.
The RPCRDMA_REQ_F_BACKCHANNEL check in xprt_rdma_free is therefore
redundant because xprt_rdma_free is not invoked for backchannel
requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. This logic is related to marshaling the request, and I'd
like to keep everything that touches req->rl_registered close
together, for CPU cache efficiency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up a harmless oversight. xprtrdma's ->set_port method has
never properly supported IPv6.
This issue has never been a problem because NFS/RDMA mounts have
always required "port=20049", thus so far, rpcbind is not invoked
for these mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Save more space in struct rpcrdma_xprt by removing the redundant
"addr" field from struct rpcrdma_create_data_internal. Wherever
we have rpcrdma_xprt, we also have the rpc_xprt, which has a
sockaddr_storage field with the same content.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This makes the address strings available for debugging messages in
earlier stages of transport set up.
The first benefit is to get rid of the single-use rep_remote_addr
field, saving 128+ bytes in struct rpcrdma_ep.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. Remove fields that should have been removed by
commit b3221d6a53 ("xprtrdma: Remove logic that constructs
RDMA_MSGP type calls").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Commit b5f0afbea4 ("xprtrdma: Per-connection pad optimization")
should have removed this.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactoring change: Remote Invalidation is particular to the memory
registration mode that is use. Use a callout instead of a generic
function to handle Remote Invalidation.
This gets rid of the 8-byte flags field in struct rpcrdma_mw, of
which only a single bit flag has been allocated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The rpcrdma_req is not shared yet, and its associated Send hasn't
been posted, thus RMW should be safe. There's no need for the
expense of a lock cycle here.
Fixes: 0ba6f37012 ("xprtrdma: Refactor rpcrdma_deferred_completion")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The backchannel code uses rpcrdma_recv_buffer_put to add new reps
to the free rep list. This also decrements rb_recv_count, which
spoofs the receive overrun logic in rpcrdma_buffer_get_rep.
Commit 9b06688bc3 ("xprtrdma: Fix additional uses of
spin_lock_irqsave(rb_lock)") replaced the original open-coded
list_add with a call to rpcrdma_recv_buffer_put(), but then a year
later, commit 05c974669e ("xprtrdma: Fix receive buffer
accounting") added rep accounting to rpcrdma_recv_buffer_put.
It was an oversight to let the backchannel continue to use this
function.
The fix this, let's combine the "add to free list" logic with
rpcrdma_create_rep.
Also, do not allocate RPCRDMA_MAX_BC_REQUESTS rpcrdma_reps in
rpcrdma_buffer_create and then allocate additional rpcrdma_reps in
rpcrdma_bc_setup_reps. Allocating the extra reps during backchannel
set-up is sufficient.
Fixes: 05c974669e ("xprtrdma: Fix receive buffer accounting")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This leak has been around forever, and is exceptionally rare.
EINVAL causes mount to fail with "an incorrect mount option was
specified" although it's not likely that one of the mount
options is incorrect. Instead, return ENODEV in this case, as this
appears to be an issue with system or device configuration rather
than a specific mount option.
Some obsolete comments are also removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This reverts commit 04e35f4495.
SELinux runs with secureexec for all non-"noatsecure" domain transitions,
which means lots of processes end up hitting the stack hard-limit change
that was introduced in order to fix a race with prlimit(). That race fix
will need to be redesigned.
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Tomáš Trnka <trnka@scm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull Page Table Isolation (PTI) v4.14 backporting base tree from Ingo Molnar:
"This tree contains the v4.14 PTI backport preparatory tree, which
consists of four merges of upstream trees and 7 cherry-picked commits,
which the upcoming PTI work depends on"
NOTE! The resulting tree is exactly the same as the original base tree
(ie the diff between this commit and its immediate first parent is
empty).
The only reason for this merge is literally to have a common point for
the actual PTI changes so that the commits can be shared in both the
4.15 and 4.14 trees.
* 'WIP.x86-pti.base-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
locking/barriers: Convert users of lockless_dereference() to READ_ONCE()
locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()
bpf: fix build issues on um due to mising bpf_perf_event.h
perf/x86: Enable free running PEBS for REGS_USER/INTR
x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD
x86/cpufeature: Add User-Mode Instruction Prevention definitions
Pull Page Table Isolation (PTI) preparatory tree from Ingo Molnar:
"This does a rename to free up linux/pti.h to be used by the upcoming
page table isolation feature"
* 'WIP.x86-pti.base.prep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
drivers/misc/intel/pti: Rename the header file to free up the namespace
Pull timer fix from Thomas Gleixner:
"A single bugfix which prevents arbitrary sigev_notify values in
posix-timers"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timer: Properly check sigevent->sigev_notify
Here are fixes for this round
- Fix for disable clk on error path in fsl-edma driver
- Disable clk fail fix in jz4740 driver
- Fix long pending bug in dmatest driver for dangling pointer
- Fix potential NULL pointer dereference in at_hdmac driver
- Error handling path in ioat driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2egq
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.15-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This time consisting of fixes in a bunch of drivers and the dmatest
module:
- Fix for disable clk on error path in fsl-edma driver
- Disable clk fail fix in jz4740 driver
- Fix long pending bug in dmatest driver for dangling pointer
- Fix potential NULL pointer dereference in at_hdmac driver
- Error handling path in ioat driver"
* tag 'dmaengine-fix-4.15-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: fsl-edma: disable clks on all error paths
dmaengine: jz4740: disable/unprepare clk if probe fails
dmaengine: dmatest: move callback wait queue to thread context
dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved
dmaengine: ioat: Fix error handling path
With CONFIG_MTD=m and CONFIG_CRAMFS=y, we now get a link failure:
fs/cramfs/inode.o: In function `cramfs_mount': inode.c:(.text+0x220): undefined reference to `mount_mtd'
fs/cramfs/inode.o: In function `cramfs_mtd_fill_super':
inode.c:(.text+0x6d8): undefined reference to `mtd_point'
inode.c:(.text+0xae4): undefined reference to `mtd_unpoint'
This adds a more specific Kconfig dependency to avoid the broken
configuration.
Alternatively we could make CRAMFS itself depend on "MTD || !MTD" with a
similar result.
Fixes: 99c18ce580 ("cramfs: direct memory access support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs fixes from Al Viro:
"The alloc_super() one is a regression in this merge window, lazytime
thing is older..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Handle lazytime in do_mount()
alloc_super(): do ->s_umount initialization earlier
ancient ext3 file system images. Also fix two xfstests failures, one
of which could cause a OOPS, plus an additional bug fix caught by fuzz
testing.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlo1y3EACgkQ8vlZVpUN
gaNFOQf/bMf6ynai1dGGRwef+UcT874NZ2Hqm+UqI6pxusz0ZeKWm8HWfPfg31Fa
o+OnUsZ7NXFBIHyfXKFJzdOgutjZ5eY0vMu+NrlyBdd6W+ZcHwn1PvQsLapFYvqK
Rt+8nWTKqtnksSfh0vyODmUYgItOULOPPepjnIPm/Pd0DinJwo0GY/8MzLkz4SpX
g6R60ou0ToEYNqBXAKIBnZ4aq8KWMtCMGcD270U5eAm/63Pt4riRwJbjITxZPAH1
wKzivP4Ce5ce8W2g2/6mFFlBFWvtlB491T+BsgHUEv3OLze+kYS2PcxQthhEmBR8
zeZ2o2/0tTxejE//cyJ4gCe3fYGRDg==
=xqLC
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a regression which caused us to fail to interpret symlinks in very
ancient ext3 file system images.
Also fix two xfstests failures, one of which could cause an OOPS, plus
an additional bug fix caught by fuzz testing"
* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix crash when a directory's i_size is too small
ext4: add missing error check in __ext4_new_inode()
ext4: fix fdatasync(2) after fallocate(2) operation
ext4: support fast symlinks from ext3 file systems
[ Note, this is a Git cherry-pick of the following commit:
d17a1d97dc: ("x86/mm/kasan: don't use vmemmap_populate() to initialize shadow")
... for easier x86 PTI code testing and back-porting. ]
The KASAN shadow is currently mapped using vmemmap_populate() since that
provides a semi-convenient way to map pages into init_top_pgt. However,
since that no longer zeroes the mapped pages, it is not suitable for
KASAN, which requires zeroed shadow memory.
Add kasan_populate_shadow() interface and use it instead of
vmemmap_populate(). Besides, this allows us to take advantage of
gigantic pages and use them to populate the shadow, which should save us
some memory wasted on page tables and reduce TLB pressure.
Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ Note, this is a Git cherry-pick of the following commit:
506458efaf ("locking/barriers: Convert users of lockless_dereference() to READ_ONCE()")
... for easier x86 PTI code testing and back-porting. ]
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ Note, this is a Git cherry-pick of the following commit:
76ebbe78f7 ("locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()")
... for easier x86 PTI code testing and back-porting. ]
In preparation for the removal of lockless_dereference(), which is the
same as READ_ONCE() on all architectures other than Alpha, add an
implicit smp_read_barrier_depends() to READ_ONCE() so that it can be
used to head dependency chains on all architectures.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ Note, this is a Git cherry-pick of the following commit:
a23f06f06d ("bpf: fix build issues on um due to mising bpf_perf_event.h")
... for easier x86 PTI code testing and back-porting. ]
Since c895f6f703 ("bpf: correct broken uapi for
BPF_PROG_TYPE_PERF_EVENT program type") um (uml) won't build
on i386 or x86_64:
[...]
CC init/main.o
In file included from ../include/linux/perf_event.h:18:0,
from ../include/linux/trace_events.h:10,
from ../include/trace/syscall.h:7,
from ../include/linux/syscalls.h:82,
from ../init/main.c:20:
../include/uapi/linux/bpf_perf_event.h:11:32: fatal error:
asm/bpf_perf_event.h: No such file or directory #include
<asm/bpf_perf_event.h>
[...]
Lets add missing bpf_perf_event.h also to um arch. This seems
to be the only one still missing.
Fixes: c895f6f703 ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Richard Weinberger <richard@sigma-star.at>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Richard Weinberger <richard@sigma-star.at>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ Note, this is a Git cherry-pick of the following commit:
a47ba4d77e ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
... for easier x86 PTI code testing and back-porting. ]
Currently free running PEBS is disabled when user or interrupt
registers are requested. Most of the registers are actually
available in the PEBS record and can be supported.
So we just need to check for the supported registers and then
allow it: it is all except for the segment register.
For user registers this only works when the counter is limited
to ring 3 only, so this also needs to be checked.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170831214630.21892-1-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
