Header file ks_wlan.h has a lot of nonsense comments along
the different declarations included on it. Most of them are
just the same as the variable name. Just remove them all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable event in ks_wlan_hw_rx function is declared
as unsigned short and can be declared as u16 which is preferred
style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Event to send to init the card are always the same so change
code to be more readable putting them into an array and
enqueuing also using a for loop.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declaration of second parameter 'event' in ks_hostif .h and .c
file is different using uint16_t and unsigned short respectively.
Just unify both using 'u16' which is preferred instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable 'byte' in ks7010_sdio_init_irqs is declared as
unsigned char and can be declared as u8 which is preferred.
It is being used in calls to ks7010_sdio_writeb which is already
expected an u8.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variables 'status', 'rsize' and 'byte' are declared as
unsigned char and can be declared as u8 which is preferred.
They are being used in ks7010_sdio_readb calls which is already
expected an u8.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable 'byte' in ks7010_rw_function is declared as unsigned
char and can be declared as u8 which is preferred. It is being used
in ks7010_sdio_readb which is already expecting an u8.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable 'byte' in _ks_wlan_hw_power_save function is declared
as unsigned char and can be declared as u8 which is preferred. It
is being using with ks7010_sdio_readb which expects u8 already.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parameter buffer in write_to_device function is declared as
a pointer to unsigned char and can be declared as an u8 type
which is preferred. Internally it calls to ks7010_sdio_write
which is using also u8 as parameter type. Update calls to this
function as well.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 92c1552cae removes WPS hardcoded
definition and its related conditional preprocessor code. There
was some missing stuff already in this files. Remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit avoids a long line changing a bit message in
_ks_wlan_hw_power_save function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ks_wlan_private struct has a pointer to struct ks_sdio_card in its
fields. Because of that a forward declaration in needed in ks_wlan.h
header and also it makes necessary to have ks_sdio_card public in
a ks7010_sdio.h header. Changing this pointer into a void pointer
makes no longer necessary to have ks7010_sdio.h header as well as
removes the forward dependency in ks_wlan.h. Declaration of
ks_sdio_card has been moved to ks7010_sdio.c source file and To make
code cleaner inside this file a new ks7010_to_func function has been
added. The code has been updated to this changes.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some definitions for rx and tx queues in ks7010_sdio
which is not the best place to put them. Changing them into the
ks_wlan header file there is no need to explicity include ks7010_sdio.h
which makes no sense at all and can be resolved easily using
forward declarations. The functions related with the queues circular
buffers have been moved also into this header.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Fix up the all of the staging ks7010 files to have a proper SPDX
identifier, based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
Extra GPL text wording can be removed as it is no longer needed at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit refactors ks_wlan_translate_scan function with
the following changes:
- reorder local variables
- use ether_addr_copy to copy ethernet addresses
- change style in 'current_ev' variable assignments
- make use of some ternaries avoiding if-else code
- use preferred style for comments
- extract common code into a new ks_wlan_add_leader_event
function
After this changes readability has been improved.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit removes a blank line which is included between
declarations and it has not sense at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ether_addr_copy to copy ethernet addresses instead of
using custom memcpy for that.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The if-else code in ks_wlan_get_power function is not needed
at all and can be achieved with a simple boolean assignation.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change if logic to handle invalid case for operation_mode
at first avoiding an 'else' path.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ether_addr_copy to copy ethernet addresses instead
of a custom memcpy. This improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of ether_addr_copy instead of memcpy for copying
ethernet address data in ks_wlan_set_wap function and avoid
an 'else' just changing if logic to check invalid values first.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To avoid a long line align values in static array
frequency_list array.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of manually memcpy ethernet addresses use ether_addr_copy
function for this purpose.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit cleans a bit ks_wlan_set_pmksa function removing
nonsense comments as well as make use of ether_addr_* family
functions written to not do manually things that were being
here. Minor single if brackets has been removed also.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit refactors ks_wlan_set_cts_mode function to
handle invalid values first and then assign the good
one changing a bit logic to use a ternary operator.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change if logic to handle invalid values first and just
assign at the end the valid one if it is the case.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit change logic to simplify conditional paths in
ks_wlan_set_power_mgmt function. It handles invalid's first
and just finally assign a valid value.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit changes logic to handle invalid values first
and just assign valid ones afterwards.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change if condition to handle invalid value first and
avoid nonsense else's path improving readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commits refactor a bit hostif_sme_set_pmksa function:
- avoid one level indentation changing if condition.
- use ether_addr_copy to copy bssid addresses.
- move 'i' initialization to declaration place.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ether_addr_copy to copy ethernet addresses in function
hostif_sme_multicast_set instead of memcpy.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ether_addr_equal to compare addresses in ether_addr_equal
function instead of comparing using memcmp.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of comparing ethernet address using memcmp in function
hostif_data_indication use ether_addr_equal function created
for this function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to achieve ethernet address copies, ether_addr_copy()
function exists. So just use it and avoid the byte by byte copy.
This increase readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This declaration is declared twice so just remove this one because
the other one is the one which contains static struct initializers.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WPS definition was defined by default in ks_wlan.h header
file. So it makes no sense to have conditional preprocessor
stuff along the code about this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid very long if condition just changing its style. This makes
checkpatch script not complains about this line.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid the use of switch-case block which is not necessary
at all and just use a ternary operator to achieve this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most cases which are being handled in the switch-case of
ks_wlan_set_mode function are just returning EINVAL. Avoid
the use of switch-case stament and just use a simple if
to handle those. This decrease LOC as well as improves
readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This definitions are in linux/wireless.h header so it is not
necessary at all to have this compatibility stuff duplicated here.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Singles if does not need at all to use brackets in its body
so just remove them which is the preferred style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some minor changes have been done in this function to clean
it a bit:
- POWER_MGMT_ACTIVE and default case are the same so
just handle that with the same block of code,
- POWER_MGMT_SAVE1 replaces if-else with a ternary operator.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function hostif_data_indication checks some hardcoded values in a
switch-case block. This values are defined in uapi/linux/llc.h
header. Just use them and avoid a comment in the code improving
readability a bit.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a lot of netdev_dbg calls related with the access point
in this function and all of them can be joined in only one call.
This makes code a bit simplier.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commits avoid some if-else code extracting common code before
its use and making use of a new variable 'size' which is assigned
using a ternary operator. This improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit reviews KSC_OPNOTSUPP related code. The
preprocessor KSC_OPNOTSUPP is defined by default so
related wext functions are not being used. Just clean
code removing all of this stuff.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit make use of IW_HANDLER to set wext operations
of the device. Using this, comments are not neccessary anymore
and also NULL entries so readability is clearly increased.
In order to avoid casting because of the use of a different
prototype in all related functions, those which are affected
have been updated also to make use of the union iwreq_data
as third parameter updating code accordly.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit reviews includes of ks_hostif.c source file.
Those which are not being used at all have been removed.
Driver header includes have been moved after the kernel
header includes to make style consistent in different
files of the driver. The need of ks_wlan.h header include
is only because of some preprocessor conditional code
of WPS definition. This definition is in ks_wlan.h
so this one must be included before the ks_hostif.h header
file.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit removes data_buff array field of ks_wlan_private
which is not being used at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
