Until recently vlv_steal_power_sequencer() wasn't being called for
normal DP ports, and hence it could assert that it should only be
called for pipe A and B (since pipe C doesn't support eDP). However
that changed when we started to consider normal DP ports as well when
choosing a PPS. So we will now get spurious warnings when
vlv_steal_power_sequencer() does get called for pipe C. Avoid this by
moving the WARN down into vlv_detach_power_sequencer() where this
assertion should still hold.
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Fixes: 9f2bdb006a ("drm/i915: Prevent PPS stealing from a normal DP port on VLV/CHV")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95287
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208175254.10958-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit d158694f45)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We first wait for a request to be submitted to hw and assigned a seqno,
before we can wait for the hw to signal completion (otherwise we don't
know the hw id we need to wait upon). Whilst waiting for the request to
be submitted, we may exceed the user's timeout and need to propagate the
error back.
v2: Make ETIME into an error from wait_for_execute for consistent exit
handling.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 4680816be3 ("drm/i915: Wait first for submission, before waiting for request completion")
Testcase: igt/gem_wait/basic-await
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170208181238.7232-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 969bb72cbf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch makes PPGTT page table non-shrinkable when using aliasing PPGTT
mode. It's just a temporary solution for making GVT-g work.
Fixes: 2ce5179fe8 ("drm/i915/gtt: Free unused lower-level page tables")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486559013-25251-2-git-send-email-zhi.a.wang@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit e81ecb5e31)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Following a reset, the context and page directory registers are lost.
However, the queue of requests that we resubmit after the reset may
depend upon them - the registers are restored from a context image, but
that restore may be inhibited and may simply be absent from the request
if it was in the middle of a sequence using the same context. If we
prime the CCID/PD registers with the first request in the queue (even
for the hung request), we prevent invalid memory access for the
following requests (and continually hung engines).
v2: Magic BIT(8), reserved for future use but still appears unused.
v3: Some commentary on handling innocent vs guilty requests
v4: Add a wait for PD_BASE fetch. The reload appears to be instant on my
Ivybridge, but this bit probably exists for a reason.
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207152437.4252-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
(cherry picked from commit c0dcb203fb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
execlist_update_context() will try to update PDPs in a context before a
ELSP submission only for full PPGTT mode, while PDPs was populated during
context initialization. Now the latter code path is removed. Let
execlist_update_context() also cover !FULL_PPGTT mode.
Fixes: 34869776c7 ("drm/i915: check ppgtt validity when init reg state")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486377436-15380-1-git-send-email-zhi.a.wang@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 04da811b3d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During system resume time initialization the HPD level on LSPCON ports
can stay low for an extended amount of time, leading to failed AUX
transfers and LSPCON initialization. Fix this by waiting for HPD to get
asserted.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99178
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-3-git-send-email-imre.deak@intel.com
(cherry picked from commit 390b4e0024)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For LSPCON resume time initialization we need to sample the
corresponding pin's HPD level, but this is only available when HPD
detection is enabled. Currently we enable detection only when enabling
HPD interrupts which is too late, so bring the enabling of detection
earlier.
This is needed by the next patch.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-2-git-send-email-imre.deak@intel.com
(cherry picked from commit 7fff8126d9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In commit 957870f934 ("drm/i915: Split out i915_gem_object_set_tiling()"),
I swapped an alignment check for IS_ALIGNED and in the process removed
the less-than check. That check turns out to be important as it was the
only rejection for stride == 0. Tvrtko did spot it, but I was
overconfident in the IS_ALIGNED() conversion.
Fixes: 957870f934 ("drm/i915: Split out i915_gem_object_set_tiling()")
Testcase: igt/gem_tiling_max_stride
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203105652.27819-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 52da22e7ab)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we fail to dma-map the object, the most common cause is lack of space
inside the SW-IOTLB due to fragmentation. If we recreate the_sg_table
using segments of PAGE_SIZE (and single page allocations), we may succeed
in remapping the scatterlist.
First became a significant problem for the mock selftests after commit
5584f1b1d7 ("drm/i915: fix i915 running as dom0 under Xen") increased
the max_order.
Fixes: 920cf41949 ("drm/i915: Introduce an internal allocator for disposable private objects")
Fixes: 5584f1b1d7 ("drm/i915: fix i915 running as dom0 under Xen")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202132721.12711-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10
(cherry picked from commit bb96dcf583)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
gvt-next-2017-02-15
- Chuanxiao's IOMMU workaround fix
- debug message cleanup from Changbin
- oops fix in fail path of workload submission when GPU reset from Changbin
- other misc fixes
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From Zhenyu, "These are GVT-g changes for 4.11 merge window, mostly for
gvt init order fix that impacted resource handling for device model, the
one i915 change has been reviewed and acked."
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use iommu for rockchip arm64 platform.
* 'drm-rockchip-next-2017-02-16' of https://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: Use common IOMMU API to attach devices
drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain
Fixes for the v4.11 merge window.
* tag 'drm-misc-next-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc:
drm: Resurrect atomic rmfb code, v3
uapi: add missing install of dma-buf.h
- fix issues met around gdp panes
- fix STI driver unbind procedure
- DVI/HDMI mode is automatically detected
- allow fps statisitics resetting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=I/dF
-----END PGP SIGNATURE-----
Merge tag 'sti-drm-next-2017-02-10' of https://github.com/vinceab/linux into drm-next
- remove deprecated stih416 chip functionnalities
- fix issues met around gdp panes
- fix STI driver unbind procedure
- DVI/HDMI mode is automatically detected
- allow fps statisitics resetting
* tag 'sti-drm-next-2017-02-10' of https://github.com/vinceab/linux:
drm/sti: debug fps reset
drm/sti: hdmi: automatically check DVI/HDMI mode
drm/sti: unbind all components while driver cleanup
drm/sti: do not post GDP command if no update
drm/sti: do not set gdp pixel clock rate if mode is not set
drm/sti: enable gdp pixel clock in atomic_update
drm/sti: remove deprecated legacy vtg slave
drm/sti: remove deprecated sink_term config
drm/sti: do not check hw scaling if mode is not set
drm/sti: Fix up crtc_state->event handling
drm/sti: use atomic_helper for commit
Panel GPIO control should be done based on platform. Add a check
to restrict VLV and CHT specific GPIO confirguration, so that
they dont apply to other platforms.
The VBT spec fails to mention the PMIC backlight control option is valid
only for VLV/CHT, and the field may be set to "PMIC" for BXT even if
PMIC is not desired or possible.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
[Jani: amended commit message a bit and fixed indentation.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-2-git-send-email-vidya.srinivas@intel.com
The max link parameters should be set/reset only on HPD or
connected boot case or on system resume.
Add a flag reset_link_params to intel_dp to decide when
to reset the max link parameters. This prevents the parameters
from getting reset/overwritten through all other
connector->funcs->detect() calls. This is important when link
training fails and the max link params are modified to the
lower fallback values.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486515251-23469-1-git-send-email-manasi.d.navare@intel.com
This was somehow lost between v3 and the merged version in Maarten's
patch merged as:
commit f2d580b9a8
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed May 4 14:38:26 2016 +0200
drm/core: Do not preserve framebuffer on rmfb, v4.
This introduces a slight behavioral change to rmfb. Instead of
disabling a crtc when the primary plane is disabled, we try to
preserve it.
Apart from old versions of the vmwgfx xorg driver, there is
nothing depending on rmfb disabling a crtc. Since vmwgfx is
a legacy driver we can safely only disable the plane with atomic.
If this commit is rejected by the driver then we will still fall
back to the old behavior and turn off the crtc.
v2:
- Remove plane->fb assignment, done by drm_atomic_clean_old_fb.
- Add WARN_ON when atomic_remove_fb fails.
- Always call drm_atomic_state_put.
v3:
- Use drm_drv_uses_atomic_modeset
- Handle the case where the first plane-disable-only commit fails
with -EINVAL. Some drivers do not support this, fall back to
disabling all crtc's in this case.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/66fc3da5-697b-1613-0a67-a5293209f0dc@linux.intel.com
As the aliasing GTT is only accessed via the global GTT, we will never
use more of it than we expose via the Global GTT and so we only need to
preallocate sufficient space within the ppgtt for the full GTT. Equally,
if the aliasing GTT is smaller than the global GTT, we have a serious
issue and must bail.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-21-chris@chris-wilson.co.uk
Once upon a time, back in the UMS days, we supported userspace
initialising the GTT and sharing portions of the GTT with other users.
Now, we own the GTT (both global and per-process) and the tables always
start at 0 - so we can remove i915_address_space.start and forget about
this old complication.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-20-chris@chris-wilson.co.uk
We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-15-chris@chris-wilson.co.uk
We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-14-chris@chris-wilson.co.uk
We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-13-chris@chris-wilson.co.uk
The hardware does not cope very well with us changing the PD within an
active context (the context must be idle for it to re-read the PD). As
we only check whether the page is idle before changing the entry (and on
through the PD tree), we cannot reliably replace PD entries on
gen6/gen7. To fully avoid changing the tree at runtime, preallocate it
on init.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-9-chris@chris-wilson.co.uk
In the future, we need to call allocate_va_range on the aliasing-ppgtt
which means moving the call down from the vma into the vm (which is
more appropriate for calling the vm function).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-8-chris@chris-wilson.co.uk
As these are now both plain and simple kmap_atomic/kunmap_atomic pairs,
we can remove the wrappers for a small gain of clarity (in particular,
not hiding the atomic critical sections!).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-7-chris@chris-wilson.co.uk
We flush the entire page every time we update a few bytes, making the
update of a page table many, many times slower than is required. If we
create a WC map of the page for our updates, we can avoid the clflush
but incur additional cost for creating the pagetable. We amoritize that
cost by reusing page vmappings, and only changing the page protection in
batches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Improve the sg iteration and in hte process eliminate a bug in
miscomputing the pml4 length as orig_nents<<PAGE_SHIFT is no longer the
full length of the sg table.
v2: Check for the end of the fourth level page table (the final pdpe)
and move onto the next.
v3: Assert that 3lvl insert_pte_entries doesn't overflow its smaller set
of PDP.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-3-chris@chris-wilson.co.uk
Inline the address computation to avoid the vfunc call for every page.
We still have to pay the high overhead of sg_page_iter_next(), but now
at least GCC can optimise the inner most loop, giving a significant
boost to some thrashing Unreal Engine workloads.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-2-chris@chris-wilson.co.uk
If there is no OPREGION_ASLE_EXT then a VBT stored in mailbox #4 may
use the ASLE_EXT parts of the opregion. Adjust the vbt_size calculation
for a vbt in mailbox #4 for this.
This fixes the driver not finding the VBT on a jumper ezpad mini3
cherrytrail tablet and on a ACER SW5_017 machine.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487088758-30050-1-git-send-email-jani.nikula@intel.com
Rockchip DRM used the arm special API, arm_iommu_*(), to attach
iommu for ARM32 SoCs. This patch convert to common iommu API
so it would support ARM64 like RK3399.
Since previous patch added support for direct IOMMU address space
management, there is no need to use DMA API anymore and this patch wires
things to use the new method.
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
The API is not suitable for subsystems consisting of multiple devices
and requires severe hacks to use it. To mitigate this, this patch
implements allocation and address space management locally by using
helpers provided by DRM framework, like other DRM drivers do, e.g.
Tegra.
This patch should not introduce any functional changes until the driver
is made to attach subdevices into an IOMMU domain with the generic IOMMU
API, which will happen in following patch. Based heavily on GEM
implementation of Tegra DRM driver.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: rjan Eide <orjan.eide@arm.com>
Currently we apply the jump to rpe if we are below it and the GPU needs
more power. For some GPUs, the rpe is 75% of the maximum range causing
us to dramatically overshoot low power applications *and* unable to
reach the low frequency that can most efficiently deliver their
workload.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210150348.22146-3-chris@chris-wilson.co.uk
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
