In (the unlikely) case our continuation merge buffer is busy, we unfortunately
can not merge further continuation printk()s into a single record and have to
store them separately, which leads to split-up output of these lines when they
are printed.
Add some flags about newlines and prefix existence to these records and try to
reconstruct the full line again, when the separated records are printed.
Reported-By: Michael Neuling <mikey@neuling.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Tested-By: Michael Neuling <mikey@neuling.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Restore support for partial reads of any size on /proc/kmsg, in case the
supplied read buffer is smaller than the record size.
Some people seem to think is is ia good idea to run:
$ dd if=/proc/kmsg bs=1 of=...
as a klog bridge.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44211
Reported-by: Jukka Ollila <jiiksteri@gmail.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
48ddbe1946 "cgroup: make css->refcnt clearing on cgroup removal
optional" allowed a css to linger after the associated cgroup is
removed. As a css holds a reference on the cgroup's dentry, it means
that cgroup dentries may linger for a while.
Destroying a superblock which has dentries with positive refcnts is a
critical bug and triggers BUG() in vfs code. As each cgroup dentry
holds an s_active reference, any lingering cgroup has both its dentry
and the superblock pinned and thus preventing premature release of
superblock.
Unfortunately, after 48ddbe1946, there's a small window while
releasing a cgroup which is directly under the root of the hierarchy.
When a cgroup directory is released, vfs layer first deletes the
corresponding dentry and then invokes dput() on the parent, which may
recurse further, so when a cgroup directly below root cgroup is
released, the cgroup is first destroyed - which releases the s_active
it was holding - and then the dentry for the root cgroup is dput().
This creates a window where the root dentry's refcnt isn't zero but
superblock's s_active is. If umount happens before or during this
window, vfs will see the root dentry with non-zero refcnt and trigger
BUG().
Before 48ddbe1946, this problem didn't exist because the last dentry
reference was guaranteed to be put synchronously from rmdir(2)
invocation which holds s_active around the whole process.
Fix it by holding an extra superblock->s_active reference across
dput() from css release, which is the dput() path added by 48ddbe1946
and the only one which doesn't hold an extra s_active ref across the
final cgroup dput().
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4FEEA5CB.8070809@huawei.com>
Reported-by: shyju pv <shyju.pv@huawei.com>
Tested-by: shyju pv <shyju.pv@huawei.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
This reverts commit fa980ca87d. The
commit was an attempt to fix a race condition where a cgroup hierarchy
may be unmounted with positive dentry reference on root cgroup. While
the commit made the race condition slightly more difficult to trigger,
the race was still there and could be reliably triggered using a
different test case.
Revert the incorrect fix. The next commit will describe the race and
fix it correctly.
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4FEEA5CB.8070809@huawei.com>
Reported-by: shyju pv <shyju.pv@huawei.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
We suppress printing kmsg records to the console, which are already printed
immediately while we have received their fragments.
Newly registered boot consoles print the entire kmsg buffer during
registration. Clear the console-suppress flag after we skipped the record
during its first storage, so any later print will see these records as usual.
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The /proc/kmsg read() interface is internally simply wired up to a sequence
of syslog() syscalls, which might are racy between their checks and actions,
regarding concurrency.
In the (very uncommon) case of concurrent readers of /dev/kmsg, relying on
usual O_NONBLOCK behavior, the recently introduced mutex might block an
O_NONBLOCK reader in read(), when poll() returns for it, but another process
has already read the data in the meantime. We've seen that while running
artificial test setups and tools that "fight" about /proc/kmsg data.
This restores the original /proc/kmsg behavior, where in case of concurrent
read()s, poll() might wake up but the read() syscall will just return 0 to
the caller, while another process has "stolen" the data.
This is in the general case not the expected behavior, but it is the exact
same one, that can easily be triggered with a 3.4 kernel, and some tools
might just rely on it.
The mutex is not needed, the original integrity issue which introduced it,
is in the meantime covered by:
"fill buffer with more than a single message for SYSLOG_ACTION_READ"
116e90b23f
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the recent split of facility and level into separate variables,
we miss the facility value (always 0 for kernel-originated messages)
in the syslog prefix.
On Tue, Jul 3, 2012 at 12:45 PM, Dan Carpenter <dan.carpenter@oracle.com> wrote:
> Static checkers complain about the impossible condition here.
>
> In 084681d14e ('printk: flush continuation lines immediately to
> console'), we changed msg->level from being a u16 to being an unsigned
> 3 bit bitfield.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Non-printable characters in the log data are hex-escaped to ensure safe
post processing. We need to escape a backslash we find in the data, to be
able to distinguish it from a backslash we add for the escaping.
Also escape the non-printable character 127.
Thanks to Miloslav Trmac for the heads up.
Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function devkmsg_read/writev/llseek/poll/open()..., the function
raw_spin_lock/unlock is used, there is potential deadlock case happening.
CPU1: thread1 doing the cat /dev/kmsg:
raw_spin_lock(&logbuf_lock);
while (user->seq == log_next_seq) {
when thread1 run here, at this time one interrupt is coming on CPU1 and running
based on this thread,if the interrupt handle called the printk which need the
logbuf_lock spin also, it will cause deadlock.
So we should use raw_spin_lock/unlock_irq here.
Acked-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although the C language allows you to break strings across lines, doing
this makes it hard for people to find the Linux kernel code corresponding
to a given console message. This commit therefore fixes broken strings
throughout RCU's source code.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The Linux kernel coding style says that single-statement blocks should
omit curly braces unless the other leg of the "if" statement has
multiple statements, in which case the curly braces should be included.
This commit fixes RCU's violations of this rule.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
bigrtm: First steps towards getting RCU out of the way of
tens-of-microseconds real-time response on systems compiled
with NR_CPUS=4096. Also cleanups for and increased concurrency
of rcu_barrier() family of primitives.
doctorture: rcutorture and documentation improvements.
fixes: Miscellaneous fixes.
fnh: RCU_FAST_NO_HZ fixes and improvements.
The recent bug that introduced the RCU callback list/count mismatch
showed the need for a diagnostic to check for this, which this commit
adds.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Thanks to Charles Wang for spotting the defects in the current code:
- If we go idle during the sample window -- after sampling, we get a
negative bias because we can negate our own sample.
- If we wake up during the sample window we get a positive bias
because we push the sample to a known active period.
So rewrite the entire nohz load-avg muck once again, now adding
copious documentation to the code.
Reported-and-tested-by: Doug Smythies <dsmythies@telus.net>
Reported-and-tested-by: Charles Wang <muming.wq@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1340373782.18025.74.camel@twins
[ minor edits ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In dup_task_struct(), if arch_dup_task_struct() fails, the clean up
code fails to clean up correctly. That's because the clean up
code depends on unininitalized ti->task pointer. We fix this
by making sure that the task and thread_info know about each other
before we attempt to take the error path.
Signed-off-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120626011815.11323.5533.stgit@dungbeetle.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull block bits from Jens Axboe:
"As vacation is coming up, thought I'd better get rid of my pending
changes in my for-linus branch for this iteration. It contains:
- Two patches for mtip32xx. Killing a non-compliant sysfs interface
and moving it to debugfs, where it belongs.
- A few patches from Asias. Two legit bug fixes, and one killing an
interface that is no longer in use.
- A patch from Jan, making the annoying partition ioctl warning a bit
less annoying, by restricting it to !CAP_SYS_RAWIO only.
- Three bug fixes for drbd from Lars Ellenberg.
- A fix for an old regression for umem, it hasn't really worked since
the plugging scheme was changed in 3.0.
- A few fixes from Tejun.
- A splice fix from Eric Dumazet, fixing an issue with pipe
resizing."
* 'for-linus' of git://git.kernel.dk/linux-block:
scsi: Silence unnecessary warnings about ioctl to partition
block: Drop dead function blk_abort_queue()
block: Mitigate lock unbalance caused by lock switching
block: Avoid missed wakeup in request waitqueue
umem: fix up unplugging
splice: fix racy pipe->buffers uses
drbd: fix null pointer dereference with on-congestion policy when diskless
drbd: fix list corruption by failing but already aborted reads
drbd: fix access of unallocated pages and kernel panic
xen/blkfront: Add WARN to deal with misbehaving backends.
blkcg: drop local variable @q from blkg_destroy()
mtip32xx: Create debugfs entries for troubleshooting
mtip32xx: Remove 'registers' and 'flags' from sysfs
blkcg: fix blkg_alloc() failure path
block: blkcg_policy_cfq shouldn't be used if !CONFIG_CFQ_GROUP_IOSCHED
block: fix return value on cfq_init() failure
mtip32xx: Remove version.h header file inclusion
xen/blkback: Copy id field when doing BLKIF_DISCARD.
If the nohz= boot parameter disables nohz, then RCU_FAST_NO_HZ needs to
also disable itself. This commit therefore checks for tick_nohz_enabled
being zero, disabling rcu_prepare_for_idle() if so. This commit assumes
that tick_nohz_enabled can change at runtime: If this is not the case,
then a simpler approach suffices.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, if several CPUs in the same package have all lazy RCU
callbacks, their wakeups will be uncorrelated. If all the CPUs are in the
same power domain (as is often the case), this will result in unnecessary
power-ups of the package. This commit therefore uses round_jiffies()
to round the timeouts to a second boundary, increasing the odds that
they can be coalesced with each other or with other timeouts.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The TINY_PREEMPT_RCU() function rcu_preempt_needs_cpu(), which is called
from rcu_needs_cpu(), assumes that it is in a quiescent state with respect
to the CPU. This is no longer the case. This commit therefore updates
rcu_preempt_needs_cpu() to make it aware that it is not running in a
quiescent state.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
Problems in RCU idle entry and exit are almost always confined to the
offending CPU. This commit therefore switches ftrace_dump() from
DUMP_ALL to DUMP_ORIG.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
If a CPU goes offline with callbacks queued, those callbacks might be
indefinitely postponed, which can result in a system hang. This commit
therefore inserts warnings for this condition.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It is time to optimize CONFIG_TREE_PREEMPT_RCU's synchronize_rcu()
for uniprocessor optimization, which means that rcu_blocking_is_gp()
can no longer rely on RCU read-side critical sections having disabled
preemption. This commit therefore disables preemption across
rcu_blocking_is_gp()'s scan of the cpu_online_mask.
(Updated from previous version to fix embarrassing bug spotted by
Wu Fengguang.)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
An uninitialized string may be displayed at the end of the rcu_preempt
detected stall info such as
0: (1 GPs behind) idle=075/140000000000000/0 =8?^D=8?^D
^^^^^^^^^^
if CONFIG_RCU_FAST_NO_HZ is not defined.
This trivial patch clears the string in this case.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_is_cpu_idle() function is used if CONFIG_DEBUG_LOCK_ALLOC,
but TINY_RCU defines it only when CONFIG_PROVE_RCU. This causes
build failures when CONFIG_DEBUG_LOCK_ALLOC=y but CONFIG_PROVE_RCU=n.
This commit therefore adjusts the #ifdefs for rcu_is_cpu_idle() so
that it is defined when CONFIG_DEBUG_LOCK_ALLOC=y.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The __call_rcu() function is a bit overweight, so this commit splits
it into actual enqueuing of and accounting for the callback (__call_rcu())
and associated RCU-core processing (__call_rcu_core()).
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The __call_rcu() function will invoke the RCU core, for example, if
it detects that the current CPU has too many callbacks. However, this
can happen on an offline CPU that is on its way to the idle loop, in
which case it is an error to invoke the RCU core, and the excess callbacks
will be adopted in any case. This commit therefore adds checks to
__call_rcu() for running on an offline CPU, refraining from invoking
the RCU core in this case.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Although __call_rcu() is handled correctly when called from a momentary
non-idle period, if it is called on a CPU that RCU believes to be idle
on RCU_FAST_NO_HZ kernels, the callback might be indefinitely postponed.
This commit therefore ensures that RCU is aware of the new callback and
has a chance to force the CPU out of dyntick-idle mode when a new callback
is posted.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The CONFIG_TREE_PREEMPT_RCU and CONFIG_TINY_PREEMPT_RCU versions of
__rcu_read_lock() and __rcu_read_unlock() are identical, so this commit
consolidates them into kernel/rcupdate.h.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The _rcu_barrier() function accesses other CPUs' rcu_data structure's
->qlen field without benefit of locking. This commit therefore adds
the required ACCESS_ONCE() wrappers around accesses and updates that
need it.
ACCESS_ONCE() is not needed when a CPU accesses its own ->qlen, or
in code that cannot run while _rcu_barrier() is sampling ->qlen fields.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
There are a couple of open-coded initializations of the rcu_data
structure's RCU callback list. This commit therefore consolidates
them into a new init_callback_list() function.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The code that attempts to identify stalls that end just as we detect
them is broken by both flavors of initialization failure. This commit
therefore properly initializes and computes the count of the number
of reasons why the RCU grace period is stalled.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current rcutorture rcu_barrier() testing never intentionally runs
more than one instance of rcu_barrier() at a given time. This fails
to test the the shiny new concurrency features of rcu_barrier(). This
commit therefore modifies the rcutorture fakewriter kthread to randomly
invoke rcu_barrier() rather than the usual synchronize_rcu().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_torture_barrier() function has a copy-and-paste typo in the
string passed to rcutorture_shutdown_absorb(), which this commit fixes.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The child threads in the rcu_torture_barrier_cbs() are improperly
synchronized, which can cause the rcu_barrier() tests to hang. The
failure mode is as follows:
1. CPU 0 running in rcu_torture_barrier() sets barrier_cbs_count
to n_barrier_cbs.
2. CPU 1 running in rcu_torture_barrier_cbs() wakes up, posts
its RCU callback, and atomically decrements barrier_cbs_count.
Because barrier_cbs_count is not zero, it does not do the wake_up().
3. CPU 2 running in rcu_torture_barrier_cbs() wakes up, but
finds that barrier_cbs_count is not equal to n_barrier_cbs,
and so returns to sleep.
4. The value of barrier_cbs_count therefore never reaches zero,
which causes the test to hang.
This commit therefore uses a phase variable to coordinate the test,
preventing this scenario from occurring.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
SRCU now has a call_srcu() and an srcu_barrier(), but rcutorture does not
test them. This commit adds the machinery to allow rcutorture's existing
tests for call_rcu() and rcu_barrier() to apply to the SRCU equivalents.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Move the raw SRCU interfaces out of the middle of the normal SRCU
interfaces.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Before RCU had unified idle, the RCU_SAVE_DYNTICK leg of the switch
statement in force_quiescent_state() was dead code for CONFIG_NO_HZ=n
kernel builds. With unified idle, the code is never dead. This commit
therefore removes the "if" statement designed to make gcc aware of when
the code was and was not dead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit applies the new for_each_rcu_flavor() macro to the
kernel/rcutree_trace.c file.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The arrival of TREE_PREEMPT_RCU some years back included some ugly
code involving either #ifdef or #ifdef'ed wrapper functions to iterate
over all non-SRCU flavors of RCU. This commit therefore introduces
a for_each_rcu_flavor() iterator over the rcu_state structures for each
flavor of RCU to clean up a bit of the ugliness.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
With the advent of __this_cpu_ptr(), it is no longer necessary to pass
both the rcu_state and rcu_data structures into __rcu_process_callbacks().
This commit therefore computes the rcu_data pointer from the rcu_state
pointer within __rcu_process_callbacks() so that callers can pass in
only the pointer to the rcu_state structure. This paves the way for
linking the rcu_state structures together and iterating over them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds an rcubarrier file to RCU's debugfs statistical tracing
directory, providing diagnostic information on rcu_barrier().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds event tracing for _rcu_barrier() execution. This
is defined only if RCU_TRACE=y.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The traditional rcu_barrier() implementation has serialized all requests,
regardless of RCU flavor, and also does not coalesce concurrent requests.
In the past, this has been good and sufficient.
However, systems are getting larger and use of rcu_barrier() has been
increasing. This commit therefore introduces a counter-based scheme
that allows _rcu_barrier() calls for the same flavor of RCU to take
advantage of each others' work.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
For global variables, C defaults all fields to zero. The initialization
of the rcu_state structure's ->n_force_qs and ->n_force_qs_ngp fields
is therefore redundant, so this commit removes these initializations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In order to allow each RCU flavor to concurrently execute its
rcu_barrier() function, it is necessary to move the relevant
state to the rcu_state structure. This commit therefore moves the
rcu_barrier_mutex global variable to a new ->barrier_mutex field
in the rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In order to allow each RCU flavor to concurrently execute its
rcu_barrier() function, it is necessary to move the relevant
state to the rcu_state structure. This commit therefore moves the
rcu_barrier_completion global variable to a new ->barrier_completion
field in the rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In order to allow each RCU flavor to concurrently execute its rcu_barrier()
function, it is necessary to move the relevant state to the rcu_state
structure. This commit therefore moves the rcu_barrier_cpu_count global
variable to a new ->barrier_cpu_count field in the rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In order for multiple flavors of RCU to each concurrently run one
rcu_barrier(), each flavor needs its own per-CPU set of rcu_head
structures. This commit therefore moves _rcu_barrier()'s set of
per-CPU rcu_head structures from per-CPU variables to the existing
per-CPU and per-RCU-flavor rcu_data structures.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This is a preparatory commit for increasing rcu_barrier()'s concurrency.
It adds a pointer in the rcu_data structure to the corresponding call_rcu()
function. This allows a pointer to the rcu_data structure to imply the
function pointer, which allows _rcu_barrier() state to be placed in the
rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Upcoming rcu_barrier() concurrency commits will result in line lengths
greater than 80 characters in the RCU_STATE_INITIALIZER(), so this commit
shortens the name of the macro's argument to prevent this.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_node tree array is sized based on compile-time constants,
including NR_CPUS. Although this approach has worked well in the past,
the recent trend by many distros to define NR_CPUS=4096 results in
excessive grace-period-initialization latencies.
This commit therefore substitutes the run-time computed nr_cpu_ids for
the compile-time NR_CPUS when building the tree. This can result in
much of the compile-time-allocated rcu_node array being unused. If
this is a major problem, you are in a specialized situation anyway,
so you can manually adjust the NR_CPUS, RCU_FANOUT, and RCU_FANOUT_LEAF
kernel config parameters.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Time to make the four-level-hierarchy setting less scary, so this
commit removes "Experimental" from the boot-time message. Leave the
message in order to get a heads-up on any possible need to expand to
a five-level hierarchy.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although making RCU_FANOUT_LEAF a kernel configuration parameter rather
than a fixed constant makes it easier for people to decrease cache-miss
overhead for large systems, it is of little help for people who must
run a single pre-built kernel binary.
This commit therefore allows the value of RCU_FANOUT_LEAF to be
increased (but not decreased!) via a boot-time parameter named
rcutree.rcu_fanout_leaf.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This reverts commit 616c310e83.
(Move PREEMPT_RCU preemption to switch_to() invocation).
Testing by Sasha Levin <levinsasha928@gmail.com> showed that this
can result in deadlock due to invoking the scheduler when one of
the runqueue locks is held. Because this commit was simply a
performance optimization, revert it.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Fix kernel-doc warnings in printk.c: use correct parameter name.
Warning(kernel/printk.c:2429): No description found for parameter 'buf'
Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is a number of printk() fixes, specifically a few reported by the
crazy blog program that ships in SUSE releases (that's "boot log" and
not "web log", it predates the general "blog" terminology by many
years), and the restoration of the continuation line functionality
reported by Stephen and others. Yes, the changes seem a bit big this
late in the cycle, but I've been beating on them for a while now, and
Stephen has even optimized it a bit, so all looks good to me.
The other change in here is a Documentation update for the stable kernel
rules describing how some distro patches should be backported, to
hopefully drive a bit more response from the distros to the stable
kernel releases.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk/uhJEACgkQMUfUDdst+ymL0QCfTjWJrdf+ooJ6Bx/NNgOGxYip
Ss0AnRrCNkfgmMcdNMn/7CIbHlaTj+S+
=M5Rg
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver Core fixes from Greg Kroah-Hartman:
"Here is a number of printk() fixes, specifically a few reported by the
crazy blog program that ships in SUSE releases (that's "boot log" and
not "web log", it predates the general "blog" terminology by many
years), and the restoration of the continuation line functionality
reported by Stephen and others. Yes, the changes seem a bit big this
late in the cycle, but I've been beating on them for a while now, and
Stephen has even optimized it a bit, so all looks good to me.
The other change in here is a Documentation update for the stable
kernel rules describing how some distro patches should be backported,
to hopefully drive a bit more response from the distros to the stable
kernel releases.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
printk: Optimize if statement logic where newline exists
printk: flush continuation lines immediately to console
syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ
Revert "printk: return -EINVAL if the message len is bigger than the buf size"
printk: fix regression in SYSLOG_ACTION_CLEAR
stable: Allow merging of backports for serious user-visible performance issues
In reviewing Kay's fix up patch: "printk: Have printk() never buffer its
data", I found two if statements that could be combined and optimized.
Put together the two 'cont.len && cont.owner == current' if statements
into a single one, and check if we need to call cont_add(). This also
removes the unneeded double cont_flush() calls.
Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mop
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When removing pages from the ring buffer, its state is not reset. This
means that the counters need to be correctly updated to account for the
pages removed.
Update the overrun counter to reflect the removed events from the pages.
Link: http://lkml.kernel.org/r/1340998301-1715-1-git-send-email-vnagarnaik@google.com
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The new_pages list head in the cpu_buffer is not initialized. When
adding pages to the ring buffer, if the memory allocation fails in
ring_buffer_resize, the clean up handler tries to free up the allocated
pages from all the cpu buffers. The panic is caused by referencing the
uninitialized new_pages list head.
Initializing the new_pages list head in rb_allocate_cpu_buffer fixes
this.
Link: http://lkml.kernel.org/r/1340391005-10880-1-git-send-email-vnagarnaik@google.com
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Continuation lines are buffered internally, intended to merge the
chunked printk()s into a single record, and to isolate potentially
racy continuation users from usual terminated line users.
This though, has the effect that partial lines are not printed to
the console in the moment they are emitted. In case the kernel
crashes in the meantime, the potentially interesting printed
information would never reach the consoles.
Here we share the continuation buffer with the console copy logic,
and partial lines are always immediately flushed to the available
consoles. They are still buffered internally to improve the
readability and integrity of the messages and minimize the amount
of needed record headers to store.
Signed-off-by: Kay Sievers <kay@vrfy.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ring buffer reader page is used to swap a page from the writable
ring buffer. If the writer happens to be on that page, it ends up on the
reader page, but will simply move off of it, back into the writable ring
buffer as writes are added.
The time stamp passed back to the readers is stored in the cpu_buffer per
CPU descriptor. This stamp is updated when a swap of the reader page takes
place, and it reads the current stamp from the page taken from the writable
ring buffer. Everytime a writer goes to a new page, it updates the time stamp
of that page.
The problem happens if a reader reads a page from an empty per CPU ring buffer.
If the buffer is empty, the swap still takes place, placing the writer at the
start of the reader page. If at a later time, a write happens, it updates the
page's time stamp and continues. But the problem is that the read_stamp does
not get updated, because the page was already swapped.
The solution to this was to not swap the page if the ring buffer happens to
be empty. This also removes the side effect that the writes on the reader
page will not get updated because the writer never gets back on the reader
page without a swap. That is, if a read happens on an empty buffer, but then
no reads happen for a while. If a swap took place, and the writer were to start
writing a lot of data (function tracer), it will start overflowing the ring buffer
and overwrite the older data. But because the writer never goes back onto the
reader page, the data left on the reader page never gets overwritten. This
causes the reader to see really old data, followed by a jump to newer data.
Link: http://lkml.kernel.org/r/1340060577-9112-1-git-send-email-dhsharp@google.com
Google-Bug-Id: 6410455
Reported-by: David Sharp <dhsharp@google.com>
tested-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Replace the NR_CPUS array of buffer_iter from the trace_iterator
with an allocated array. This will just create an array of
possible CPUS instead of the max number specified.
The use of NR_CPUS in that array caused allocation failures for
machines that were tight on memory. This did not cause any failures
to the system itself (no crashes), but caused unnecessary failures
for reading the trace files.
Added a helper function called 'trace_buffer_iter()' that returns
the buffer_iter item or NULL if it is not defined or the array was
not allocated. Some routines do not require the array
(tracing_open_pipe() for one).
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a WARN_ON() output on test failures so that they are easier to detect
in automated tests. Although, the WARN_ON() will not print if the test
causes the system to crash, obviously.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The recent changes to the printk buffer management resulted in
SYSLOG_ACTION_READ to only return a single message, whereas previously
the buffer would get filled as much as possible. As, when too small to
fit everything, filling it to the last byte would be pretty ugly with
the new code, the patch arranges for as many messages as possible to
get returned in a single invocation. User space tools in at least all
SLES versions depend on the old behavior.
This at once addresses the issue attempted to get fixed with commit
b56a39ac26 ("printk: return -EINVAL if
the message len is bigger than the buf size"), and since that commit
widened the possibility for losing a message altogether, the patch
here assumes that this other commit would get reverted first
(otherwise the patch here won't apply).
Furthermore, this patch also addresses the problem dealt with in
commit 4a77a5a06e ("printk: use mutex
lock to stop syslog_seq from going wild"), so I'd recommend reverting
that one too (albeit there's no direct collision between the two).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kay Sievers <kay@vrfy.org>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit b56a39ac26.
A better patch from Jan will follow this to resolve the issue.
Acked-by: Kay Sievers <kay@vrfy.org>
Cc: Fengguang Wu <wfg@linux.intel.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b1420f1c (Make rcu_barrier() less disruptive) rearranged the
code in rcu_do_batch(), moving the ->qlen manipulation to follow
the requeueing of the callbacks. Unfortunately, this rearrangement
clobbered the value of the "count" local variable before the value
of rdp->qlen was adjusted, resulting in the value of rdp->qlen being
inaccurate. This commit therefore introduces an index variable "i",
avoiding the inadvertent multiplexing.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Commit 7ff9554bb5 (printk: convert
byte-buffer to variable-length record buffer) introduced a regression
by accidentally removing a "break" statement from inside the big
switch in printk's do_syslog(). The symptom of this bug is that the
"dmesg -C" command doesn't only clear the kernel's log buffer; it also
disables console logging.
This patch (as1561) fixes the regression by adding the missing
"break".
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull perf updates from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ftrace: Make all inline tags also include notrace
perf: Use css_tryget() to avoid propping up css refcount
perf tools: Fix synthesizing tracepoint names from the perf.data headers
perf stat: Fix default output file
perf tools: Fix endianity swapping for adds_features bitmask
Pull two cgroup fixes from Tejun Heo:
"This containes two patches fixing a refcnt race bug during css_put().
Decrementing and checking the value weren't atomic and two tasks could
think that they both pushed the counter to zero."
* 'for-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroups: Account for CSS_DEACT_BIAS in __css_put
cgroup: make sure that decisions in __css_put are atomic
Here are some fixes for 3.5-rc4 that resolve the kmsg problems that
people have reported showing up after the printk and kmsg changes went
into 3.5-rc1. There are also a smattering of other tiny fixes for the
extcon and hyper-v drivers that people have reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk/iNQcACgkQMUfUDdst+yklTQCfZCXFlhA43bZo/8Joqd2pLIIW
2uoAoMze0SlfJeN6Qu7yY0P+qV/f/pc3
=UNFY
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and printk fixes from Greg Kroah-Hartman:
"Here are some fixes for 3.5-rc4 that resolve the kmsg problems that
people have reported showing up after the printk and kmsg changes went
into 3.5-rc1. There are also a smattering of other tiny fixes for the
extcon and hyper-v drivers that people have reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
extcon: max8997: Add missing kfree for info->edev in max8997_muic_remove()
extcon: Set platform drvdata in gpio_extcon_probe() and fix irq leak
extcon: Fix wrong index in max8997_extcon_cable[]
kmsg - kmsg_dump() fix CONFIG_PRINTK=n compilation
printk: return -EINVAL if the message len is bigger than the buf size
printk: use mutex lock to stop syslog_seq from going wild
kmsg - kmsg_dump() use iterator to receive log buffer content
vme: change maintainer e-mail address
Extcon: Don't try to create duplicate link names
driver core: fixup reversed deferred probe order
printk: Fix alignment of buf causing crash on ARM EABI
Tools: hv: verify origin of netlink connector message
During merging of PR_GET_TID_ADDRESS patch the code has been misplaced (it
happened to appear under PR_MCE_KILL) in result noone can use this option.
Fix it by moving code snippet to a proper place.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
find_new_reaper() changes pid_ns->child_reaper, see add0d4df ("pid_ns:
zap_pid_ns_processes: fix the ->child_reaper changing").
The original reason has gone away after the previous patch, ->children
list must be empty after zap_pid_ns_processes().
However now we can not switch to init_pid_ns.child_reaper.
__unhash_process() relies on the "->child_reaper == parent" check, but
this check does not work if the last exiting task is also the child
reaper.
As Eric sugested, we can change __unhash_process() to use the parent's
pid_ns and remove this code.
Also, with this change we can move detach_pid(PIDTYPE_PID) back, where it
was before the previous fix.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Tested-by: Andrew Wagin <avagin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Today we have a twofold bug. Sometimes release_task on pid == 1 in a pid
namespace can run before other processes in a pid namespace have had
release task called. With the result that pid_ns_release_proc can be
called before the last proc_flus_task() is done using upid->ns->proc_mnt,
resulting in the use of a stale pointer. This same set of circumstances
can lead to waitpid(...) returning for a processes started with
clone(CLONE_NEWPID) before the every process in the pid namespace has
actually exited.
To fix this modify zap_pid_ns_processess wait until all other processes in
the pid namespace have exited, even EXIT_DEAD zombies.
The delay_group_leader and related tests ensure that the thread gruop
leader will be the last thread of a process group to be reaped, or to
become EXIT_DEAD and self reap. With the change to zap_pid_ns_processes
we get the guarantee that pid == 1 in a pid namespace will be the last
task that release_task is called on.
With pid == 1 being the last task to pass through release_task
pid_ns_release_proc can no longer be called too early nor can wait return
before all of the EXIT_DEAD tasks in a pid namespace have exited.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Tested-by: Andrew Wagin <avagin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_exit() and exec_mmap() call sync_mm_rss() before mm_release() does
put_user(clear_child_tid) which can update task->rss_stat and thus make
mm->rss_stat inconsistent. This triggers the "BUG:" printk in check_mm().
Let's fix this bug in the safest way, and optimize/cleanup this later.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we fixed the race between atomic_dec and css_refcnt, we missed
the fact that css_refcnt internally subtracts CSS_DEACT_BIAS to get
the actual reference count. This can potentially cause a refcount leak
if __css_put races with cgroup_clear_css_refs.
Signed-off-by: Salman Qazi <sqazi@google.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Originally from Peter Zijlstra. The helper migrates perf events
from one cpu to another cpu.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-5-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allow the pmu->event_init callback to change event->cpu, so the PMU driver
can choose the CPU on which to install events.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-4-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_event_open() requires the cpu on which to install event is online,
but the cpu can go offline after perf_event_open checks that. Add a
get_online_cpus()/put_online_cpus() pair to avoid the race.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-3-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
An rmdir pushes css's ref count to zero. However, if the associated
directory is open at the time, the dentry ref count is non-zero. If
the fd for this directory is then passed into perf_event_open, it
does a css_get(). This bounces the ref count back up from zero. This
is a problem by itself. But what makes it turn into a crash is the
fact that we end up doing an extra dput, since we perform a dput
when css_put sees the ref count go down to zero.
css_tryget() does not fall into that trap. So, we use that instead.
Reproduction test-case for the bug:
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <linux/unistd.h>
#include <linux/perf_event.h>
#include <string.h>
#include <errno.h>
#include <stdio.h>
#define PERF_FLAG_PID_CGROUP (1U << 2)
int perf_event_open(struct perf_event_attr *hw_event_uptr,
pid_t pid, int cpu, int group_fd, unsigned long flags) {
return syscall(__NR_perf_event_open,hw_event_uptr, pid, cpu,
group_fd, flags);
}
/*
* Directly poke at the perf_event bug, since it's proving hard to repro
* depending on where in the kernel tree. what moved?
*/
int main(int argc, char **argv)
{
int fd;
struct perf_event_attr attr;
memset(&attr, 0, sizeof(attr));
attr.exclude_kernel = 1;
attr.size = sizeof(attr);
mkdir("/dev/cgroup/perf_event/blah", 0777);
fd = open("/dev/cgroup/perf_event/blah", O_RDONLY);
perror("open");
rmdir("/dev/cgroup/perf_event/blah");
sleep(2);
perf_event_open(&attr, fd, 0, -1, PERF_FLAG_PID_CGROUP);
perror("perf_event_open");
close(fd);
return 0;
}
Signed-off-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20120614223108.1025.2503.stgit@dungbeetle.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Just like what devkmsg_read() does, return -EINVAL if the message len is
bigger than the buf size, or it will trigger a segfault error.
Acked-by: Kay Sievers <kay@vrfy.org>
Acked-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although syslog_seq and log_next_seq stuff are protected by logbuf_lock
spin log, it's not enough. Say we have two processes A and B, and let
syslog_seq = N, while log_next_seq = N + 1, and the two processes both
come to syslog_print at almost the same time. And No matter which
process get the spin lock first, it will increase syslog_seq by one,
then release spin lock; thus later, another process increase syslog_seq
by one again. In this case, syslog_seq is bigger than syslog_next_seq.
And latter, it would make:
wait_event_interruptiable(log_wait, syslog != log_next_seq)
don't wait any more even there is no new write comes. Thus it introduce
a infinite loop reading.
I can easily see this kind of issue by the following steps:
# cat /proc/kmsg # at meantime, I don't kill rsyslog
# So they are the two processes.
# xinit # I added drm.debug=6 in the kernel parameter line,
# so that it will produce lots of message and let that
# issue happen
It's 100% reproducable on my side. And my disk will be filled up by
/var/log/messages in a quite short time.
So, introduce a mutex_lock to stop syslog_seq from going wild just like
what devkmsg_read() does. It does fix this issue as expected.
v2: use mutex_lock_interruptiable() instead (comments from Kay)
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-By: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. __copy_insn() needs "loff_t offset", not "unsigned long",
to read the file.
2. use pgoff_t for "idx" and remove the unnecessary typecast.
3. fix the typo, "&=" is not what we want
4. can't resist, rename off1 to off.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154359.GA9625@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
loff_t looks confusing when it is used for the virtual address.
Change map_info and install_breakpoint/remove_breakpoint paths
to use "unsigned long".
The patch doesn't change vma_address(), it can't return "long"
because it is used to verify the mapping. But probably this
needs some cleanups too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154355.GA9622@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
uprobe->pending_list is only used to create the temporary list,
it has no meaning after we drop uprobes_mmap_hash(inode).
No need to initialize this node or remove it from tmp_list, and
we can use list_for_each_entry().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120615154353.GA9614@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
write_opcode() ensures that UPROBE_SWBP_INSN doesn't cross the
page boundary. This looks a bit confusing, the check does not
depend on vaddr and it is enough to do it only once right after
install_breakpoint()->arch_uprobe_analyze_insn().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154350.GA9611@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
write_opcode() is called by register_for_each_vma() and
uprobe_mmap() paths. In both cases the caller has already
verified this vaddr under mmap_sem, no need to re-check.
Note also that this check is wrong anyway, we should not
truncate loff_t returned by vma_address() if we do not trust
this mapping.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154347.GA9604@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
copy_insn() returns -ENOMEM if the first __copy_insn() fails,
it should return the correct error code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154344.GA9601@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
1. copy_insn() doesn't need "addr", it can use uprobe->offset.
Remove this argument.
2. Change copy_insn/__copy_insn to accept "struct file*" instead
of vma.
copy_insn() is called only once and mm/vma/vaddr are random, it
shouldn't depend on them.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154342.GA9598@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because the mind is treacherous and makes us forget we need to
write stuff down.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120615154339.GA9591@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
build_map_info() doesn't allocate the memory under i_mmap_mutex
to avoid the deadlock with page reclaim. But it can try
GFP_NOWAIT first, it should work in the likely case and thus we
almost never need the pre-alloc-and-retry path.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Link: http://lkml.kernel.org/r/20120615154336.GA9588@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently register_for_each_vma() is O(n ** 2) + O(n ** 3),
every time find_next_vma_info() "restarts" the
vma_prio_tree_foreach() loop and each iteration rechecks the
whole try_list. This also means that try_list can grow
"indefinitely" if register/unregister races with munmap/mmap
activity even if the number of mapping is bounded at any time.
With this patch register_for_each_vma() builds the list of
mm/vaddr structures only once and does install_breakpoint() for
each entry.
We do not care about the new mappings which can be created after
build_map_info() drops mapping->i_mmap_mutex, uprobe_mmap()
should do its work.
Note that we do not allocate map_info under i_mmap_mutex, this
can deadlock with page reclaim (but see the next patch). So we
use 2 lists, "curr" which we are going to return, and "prev"
which holds the already allocated memory. The main loop deques
the entry from "prev" (initially it is empty), and if "prev"
becomes empty again it counts the number of entries we need to
pre-allocate outside of i_mmap_mutex.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Link: http://lkml.kernel.org/r/20120615154333.GA9581@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
install_breakpoint() returns -EEXIST if is_swbp_insn(orig_insn)
== T, the caller treats this code as success.
This is doubly wrong. The successful return should set
UPROBE_COPY_INSN, but the real problem is that it shouldn't
succeed. If the probed insn is int3 the application should get
SIGTRAP, this won't happen with uprobe.
Probably we can fix this, we can add the UPROBE_SHARED_BP flag
and teach handle_swbp/set_orig_insn to handle this case
correctly. But this needs some complications and we have other
insns which can't be probed, lets make a simple fix for now.
I think this needs a cleanup. UPROBE_COPY_INSN should die,
copy_insn() should be called by alloc_uprobe().
arch_uprobe_analyze_insn() depends on ->mm (ia32_compat) but it
is called only once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154331.GA9578@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
write_opcode() gets old_page via get_user_pages() and then calls
__replace_page() which assumes that this old_page is still
mapped after pte_offset_map_lock().
This is not true if this old_page was already try_to_unmap()'ed,
and in this case everything __replace_page() does with old_page
is wrong. Just for example, put_page() is not balanced.
I think it is possible to teach __replace_page() to handle this
unlikely case correctly, but this patch simply changes it to use
page_check_address() and return -EAGAIN if it fails. The caller
should notice this error code and retry.
Note: write_opcode() asks for the cleanups, I'll try to do this
in a separate patch.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154328.GA9571@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
