leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,106,976 Commits 2 Branches 0 Tags 5.1 GiB
e6484bd488
Commit Graph

1589 Commits

Author SHA1 Message Date
Josef Bacik
26c2c4540d btrfs: add an inode-item.h 
We have a few helpers in inode-item.c, and I'm going to make a few
changes to how we do truncate in the future, so break out these
definitions into their own header file to trim down ctree.h some and
make it easier to do the work on truncate in the future.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-07 14:18:23 +01:00
Nikolay Borisov
efc0e69c2f btrfs: introduce exclusive operation BALANCE_PAUSED state 
Current set of exclusive operation states is not sufficient to handle
all practical use cases. In particular there is a need to be able to add
a device to a filesystem that have paused balance. Currently there is no
way to distinguish between a running and a paused balance. Fix this by
introducing BTRFS_EXCLOP_BALANCE_PAUSED which is going to be set in 2
occasions:

1. When a filesystem is mounted with skip_balance and there is an
   unfinished balance it will now be into BALANCE_PAUSED instead of
   simply BALANCE state.

2. When a running balance is paused.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-07 14:18:23 +01:00
Filipe Manana
d96b34248c btrfs: make send work with concurrent block group relocation 
We don't allow send and balance/relocation to run in parallel in order
to prevent send failing or silently producing some bad stream. This is
because while send is using an extent (specially metadata) or about to
read a metadata extent and expecting it belongs to a specific parent
node, relocation can run, the transaction used for the relocation is
committed and the extent gets reallocated while send is still using the
extent, so it ends up with a different content than expected. This can
result in just failing to read a metadata extent due to failure of the
validation checks (parent transid, level, etc), failure to find a
backreference for a data extent, and other unexpected failures. Besides
reallocation, there's also a similar problem of an extent getting
discarded when it's unpinned after the transaction used for block group
relocation is committed.

The restriction between balance and send was added in commit 9e967495e0
("Btrfs: prevent send failures and crashes due to concurrent relocation"),
kernel 5.3, while the more general restriction between send and relocation
was added in commit 1cea5cf0e6 ("btrfs: ensure relocation never runs
while we have send operations running"), kernel 5.14.

Both send and relocation can be very long running operations. Relocation
because it has to do a lot of IO and expensive backreference lookups in
case there are many snapshots, and send due to read IO when operating on
very large trees. This makes it inconvenient for users and tools to deal
with scheduling both operations.

For zoned filesystem we also have automatic block group relocation, so
send can fail with -EAGAIN when users least expect it or send can end up
delaying the block group relocation for too long. In the future we might
also get the automatic block group relocation for non zoned filesystems.

This change makes it possible for send and relocation to run in parallel.
This is achieved the following way:

1) For all tree searches, send acquires a read lock on the commit root
   semaphore;

2) After each tree search, and before releasing the commit root semaphore,
   the leaf is cloned and placed in the search path (struct btrfs_path);

3) After releasing the commit root semaphore, the changed_cb() callback
   is invoked, which operates on the leaf and writes commands to the pipe
   (or file in case send/receive is not used with a pipe). It's important
   here to not hold a lock on the commit root semaphore, because if we did
   we could deadlock when sending and receiving to the same filesystem
   using a pipe - the send task blocks on the pipe because it's full, the
   receive task, which is the only consumer of the pipe, triggers a
   transaction commit when attempting to create a subvolume or reserve
   space for a write operation for example, but the transaction commit
   blocks trying to write lock the commit root semaphore, resulting in a
   deadlock;

4) Before moving to the next key, or advancing to the next change in case
   of an incremental send, check if a transaction used for relocation was
   committed (or is about to finish its commit). If so, release the search
   path(s) and restart the search, to where we were before, so that we
   don't operate on stale extent buffers. The search restarts are always
   possible because both the send and parent roots are RO, and no one can
   add, remove of update keys (change their offset) in RO trees - the
   only exception is deduplication, but that is still not allowed to run
   in parallel with send;

5) Periodically check if there is contention on the commit root semaphore,
   which means there is a transaction commit trying to write lock it, and
   release the semaphore and reschedule if there is contention, so as to
   avoid causing any significant delays to transaction commits.

This leaves some room for optimizations for send to have less path
releases and re searching the trees when there's relocation running, but
for now it's kept simple as it performs quite well (on very large trees
with resulting send streams in the order of a few hundred gigabytes).

Test case btrfs/187, from fstests, stresses relocation, send and
deduplication attempting to run in parallel, but without verifying if send
succeeds and if it produces correct streams. A new test case will be added
that exercises relocation happening in parallel with send and then checks
that send succeeds and the resulting streams are correct.

A final note is that for now this still leaves the mutual exclusion
between send operations and deduplication on files belonging to a root
used by send operations. A solution for that will be slightly more complex
but it will eventually be built on top of this change.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-07 14:18:23 +01:00
Josef Bacik
abed4aaae4 btrfs: track the csum, extent, and free space trees in a rb tree 
In the future we are going to have multiple copies of these trees.  To
facilitate this we need a way to lookup the different roots we are
looking for.  Handle this by adding a global root rb tree that is
indexed on the root->root_key.  Then instead of loading the roots at
mount time with individually targeted keys, simply search the tree_root
for anything with the specific objectid we want.  This will make it
straightforward to support both old style and new style file systems.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:50 +01:00
Josef Bacik
7939dd9f35 btrfs: stop accessing ->free_space_root directly 
We're going to have multiple free space roots in the future, so adjust
all the users of the free space root to use a helper to access the root.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:49 +01:00
Josef Bacik
fc28b25e1f btrfs: stop accessing ->csum_root directly 
We are going to have multiple csum roots in the future, so convert all
users of ->csum_root to btrfs_csum_root() and rename ->csum_root to
->_csum_root so we can easily find remaining users in the future.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:49 +01:00
Josef Bacik
056c831116 btrfs: set BTRFS_FS_STATE_NO_CSUMS if we fail to load the csum root 
We have a few places where we skip doing csums if we mounted with one of
the rescue options that ignores bad csum roots.  In the future when
there are multiple csum roots it'll be costly to check and see if there
are any missing csum roots, so simply add a flag to indicate the fs
should skip loading csums in case of errors.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:49 +01:00
Josef Bacik
29cbcf4017 btrfs: stop accessing ->extent_root directly 
When we start having multiple extent roots we'll need to use a helper to
get to the correct extent_root.  Rename fs_info->extent_root to
_extent_root and convert all of the users of the extent root to using
the btrfs_extent_root() helper.  This will allow us to easily clean up
the remaining direct accesses in the future.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:49 +01:00
Josef Bacik
fdfbf02066 btrfs: rework async transaction committing 
Currently we do this awful thing where we get another ref on a trans
handle, async off that handle and commit the transaction from that work.
Because we do this we have to mess with current->journal_info and the
freeze counting stuff.

We already have an async thing to kick for the transaction commit, the
transaction kthread.  Replace this work struct with a flag on the
fs_info to tell the kthread to go ahead and commit even if it's before
our timeout.  Then we can drastically simplify the async transaction
commit path.

Note: this can be simplified and functionality based on the pending
operation COMMIT.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add note ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:46 +01:00
Josef Bacik
0af4769da6 btrfs: remove unused BTRFS_FS_BARRIER flag 
This is no longer used, the -o nobarrier is handled by
BTRFS_MOUNT_NOBARRIER.  Remove the flag.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:46 +01:00
Josef Bacik
54230013d4 btrfs: get rid of root->orphan_cleanup_state 
Now that we don't care about the stage of the orphan_cleanup_state,
simply replace it with a bit on ->state to make sure we don't call the
orphan cleanup every time we wander into this root.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:45 +01:00
Josef Bacik
dc2e724e0f btrfs: rename btrfs_item_end_nr to btrfs_item_data_end 
The name btrfs_item_end_nr() is a bit of a misnomer, as it's actually
the offset of the end of the data the item points to.  In fact all of
the helpers that we use btrfs_item_end_nr() use data in their name, like
BTRFS_LEAF_DATA_SIZE() and leaf_data().  Rename to btrfs_item_data_end()
to make it clear what this helper is giving us.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:43 +01:00
Josef Bacik
5a08663d01 btrfs: remove the btrfs_item_end() helper 
We're only using btrfs_item_end() from btrfs_item_end_nr(), so this can
be collapsed.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:43 +01:00
Josef Bacik
3212fa14e7 btrfs: drop the _nr from the item helpers 
Now that all call sites are using the slot number to modify item values,
rename the SETGET helpers to raw_item_*(), and then rework the _nr()
helpers to be the btrfs_item_*() btrfs_set_item_*() helpers, and then
rename all of the callers to the new helpers.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:43 +01:00
Josef Bacik
7479420736 btrfs: introduce item_nr token variant helpers 
The last remaining place where we have the pattern of

	item = btrfs_item_nr(slot)
	<do something with the item>

are the token helpers.  Handle this by introducing token helpers that
will do the btrfs_item_nr() work inside of the helper itself, and then
convert all users of the btrfs_item token helpers to the new _nr()
variants.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:43 +01:00
Josef Bacik
437bd07e6c btrfs: make btrfs_file_extent_inline_item_len take a slot 
Instead of getting the btrfs_item for this, simply pass in the slot of
the item and then use the btrfs_item_size_nr() helper inside of
btrfs_file_extent_inline_item_len().

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:43 +01:00
Josef Bacik
c91666b1f6 btrfs: add btrfs_set_item_*_nr() helpers 
We have the pattern of

	item = btrfs_item_nr(slot);
	btrfs_set_item_*(leaf, item);

in a bunch of places in our code.  Fix this by adding
btrfs_set_item_*_nr() helpers which will do the appropriate work, and
replace those calls with

	btrfs_set_item_*_nr(leaf, slot);

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2022-01-03 15:09:42 +01:00
Filipe Manana
7a1636089a btrfs: fix invalid delayed ref after subvolume creation failure 
When creating a subvolume, at ioctl.c:create_subvol(), if we fail to
insert the new root's root item into the root tree, we are freeing the
metadata extent we reserved for the new root to prevent a metadata
extent leak, as we don't abort the transaction at that point (since
there is nothing at that point that is irreversible).

However we allocated the metadata extent for the new root which we are
creating for the new subvolume, so its delayed reference refers to the
ID of this new root. But when we free the metadata extent we pass the
root of the subvolume where the new subvolume is located to
btrfs_free_tree_block() - this is incorrect because this will generate
a delayed reference that refers to the ID of the parent subvolume's root,
and not to ID of the new root.

This results in a failure when running delayed references that leads to
a transaction abort and a trace like the following:

[3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs]
[3868.739857] Code: 68 0f 85 e6 fb ff (...)
[3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246
[3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002
[3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88
[3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88
[3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000
[3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88
[3868.750725] FS:  00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000
[3868.752275] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0
[3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[3868.757803] Call Trace:
[3868.758281]  <TASK>
[3868.758655]  ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs]
[3868.759827]  __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs]
[3868.761047]  btrfs_run_delayed_refs+0x86/0x210 [btrfs]
[3868.762069]  ? lock_acquired+0x19f/0x420
[3868.762829]  btrfs_commit_transaction+0x69/0xb20 [btrfs]
[3868.763860]  ? _raw_spin_unlock+0x29/0x40
[3868.764614]  ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs]
[3868.765870]  create_subvol+0x1d8/0x9a0 [btrfs]
[3868.766766]  btrfs_mksubvol+0x447/0x4c0 [btrfs]
[3868.767669]  ? preempt_count_add+0x49/0xa0
[3868.768444]  __btrfs_ioctl_snap_create+0x123/0x190 [btrfs]
[3868.769639]  ? _copy_from_user+0x66/0xa0
[3868.770391]  btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs]
[3868.771495]  btrfs_ioctl+0xd1e/0x35c0 [btrfs]
[3868.772364]  ? __slab_free+0x10a/0x360
[3868.773198]  ? rcu_read_lock_sched_held+0x12/0x60
[3868.774121]  ? lock_release+0x223/0x4a0
[3868.774863]  ? lock_acquired+0x19f/0x420
[3868.775634]  ? rcu_read_lock_sched_held+0x12/0x60
[3868.776530]  ? trace_hardirqs_on+0x1b/0xe0
[3868.777373]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
[3868.778280]  ? kmem_cache_free+0x321/0x3c0
[3868.779011]  ? __x64_sys_ioctl+0x83/0xb0
[3868.779718]  __x64_sys_ioctl+0x83/0xb0
[3868.780387]  do_syscall_64+0x3b/0xc0
[3868.781059]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[3868.781953] RIP: 0033:0x7f281c59e957
[3868.782585] Code: 3c 1c 48 f7 d8 4c (...)
[3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957
[3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003
[3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36
[3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003
[3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc
[3868.793765]  </TASK>
[3868.794037] irq event stamp: 0
[3868.794548] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040
[3868.797086] softirqs last  enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040
[3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0
[3868.799284] ---[ end trace be24c7002fe27747 ]---
[3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2
[3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627
[3868.802056]  item 0 key (237436928 169 0) itemoff 16250 itemsize 33
[3868.802863]          extent refs 1 gen 1265 flags 2
[3868.803447]          ref#0: tree block backref root 1610
(...)
[3869.064354]  item 114 key (241008640 169 0) itemoff 12488 itemsize 33
[3869.065421]          extent refs 1 gen 1268 flags 2
[3869.066115]          ref#0: tree block backref root 1689
(...)
[3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622  owner 0 offset 0
[3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry
[3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry

Fix this by passing the new subvolume's root ID to btrfs_free_tree_block().
This requires changing the root argument of btrfs_free_tree_block() from
struct btrfs_root * to a u64, since at this point during the subvolume
creation we have not yet created the struct btrfs_root for the new
subvolume, and btrfs_free_tree_block() only needs a root ID and nothing
else from a struct btrfs_root.

This was triggered by test case generic/475 from fstests.

Fixes: 67addf2900 ("btrfs: fix metadata extent leak after failure to create subvolume")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-12-15 17:07:33 +01:00
Filipe Manana
4467af8809 btrfs: remove root argument from btrfs_unlink_inode() 
The root argument passed to btrfs_unlink_inode() and its callee,
__btrfs_unlink_inode(), always matches the root of the given directory and
the given inode. So remove the argument and make __btrfs_unlink_inode()
use the root of the directory.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-29 12:39:13 +02:00
Qu Wenruo
3873247451 btrfs: make btrfs_super_block size match BTRFS_SUPER_INFO_SIZE 
It's a common practice to avoid use sizeof(struct btrfs_super_block)
(3531), but to use BTRFS_SUPER_INFO_SIZE (4096).

The problem is that, sizeof(struct btrfs_super_block) doesn't match
BTRFS_SUPER_INFO_SIZE from the very beginning.

Furthermore, for all call sites except selftests, we always allocate
BTRFS_SUPER_INFO_SIZE space for super block, there isn't any real reason
to use the smaller value, and it doesn't really save any space.

So let's get rid of such confusing behavior, and unify those two values.

This modification also adds a new static_assert() to verify the size,
and moves the BTRFS_SUPER_INFO_* macros to the definition of
btrfs_super_block for the static_assert().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:08:07 +02:00
Josef Bacik
8496153945 btrfs: add a BTRFS_FS_ERROR helper 
We have a few flags that are inconsistently used to describe the fs in
different states of failure.  As of 5963ffcaf3 ("btrfs: always abort
the transaction if we abort a trans handle") we will always set
BTRFS_FS_STATE_ERROR if we abort, so we don't have to check both ABORTED
and ERROR to see if things have gone wrong.  Add a helper to check
BTRFS_FS_STATE_ERROR and then convert all checkers of FS_STATE_ERROR to
use the helper.

The TRANS_ABORTED bit check was added in af72273381 ("Btrfs: clean up
resources during umount after trans is aborted") but is not actually
specific.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:08:05 +02:00
Qu Wenruo
6aabd85835 btrfs: remove unused function btrfs_bio_fits_in_stripe() 
As the last caller in compression.c has been removed, we don't need that
function anymore.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:08:04 +02:00
Filipe Manana
f064165661 btrfs: unexport setup_items_for_insert() 
Since setup_items_for_insert() is not used anymore outside of ctree.c,
make it static and remove its prototype from ctree.h. This also requires
to move the definition of setup_item_for_insert() from ctree.h to ctree.c
and move down btrfs_duplicate_item() so that it's defined after
setup_items_for_insert().

Further, since setup_item_for_insert() is used outside ctree.c, rename it
to btrfs_setup_item_for_insert().

This patch is part of a small patchset that is comprised of the following
patches:

  btrfs: loop only once over data sizes array when inserting an item batch
  btrfs: unexport setup_items_for_insert()
  btrfs: use single bulk copy operations when logging directories

This is patch 2/3 and performance results, and the specific tests, are
included in the changelog of patch 3/3.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:08:03 +02:00
Filipe Manana
b7ef5f3a6f btrfs: loop only once over data sizes array when inserting an item batch 
When inserting a batch of items into a btree, we end up looping over the
data sizes array 3 times:

1) Once in the caller of btrfs_insert_empty_items(), when it populates the
   array with the data sizes for each item;

2) Once at btrfs_insert_empty_items() to sum the elements of the data
   sizes array and compute the total data size;

3) And then once again at setup_items_for_insert(), where we do exactly
   the same as what we do at btrfs_insert_empty_items(), to compute the
   total data size.

That is not bad for small arrays, but when the arrays have hundreds of
elements, the time spent on looping is not negligible. For example when
doing batch inserts of delayed items for dir index items or when logging
a directory, it's common to have 200 to 260 dir index items in a single
batch when using a leaf size of 16K and using file names between 8 and 12
characters. For a 64K leaf size, multiply that by 4. Taking into account
that during directory logging or when flushing delayed dir index items we
can have many of those large batches, the time spent on the looping adds
up quickly.

It's also more important to avoid it at setup_items_for_insert(), since
we are holding a write lock on a leaf and, in some cases, on upper nodes
of the btree, which causes us to block other tasks that want to access
the leaf and nodes for longer than necessary.

So change the code so that setup_items_for_insert() and
btrfs_insert_empty_items() no longer compute the total data size, and
instead rely on the caller to supply it. This makes us loop over the
array only once, where we can both populate the data size array and
compute the total data size, taking advantage of spatial and temporal
locality. To make this more manageable, use a structure to contain
all the relevant details for a batch of items (keys array, data sizes
array, total data size, number of items), and use it as an argument
for btrfs_insert_empty_items() and setup_items_for_insert().

This patch is part of a small patchset that is comprised of the following
patches:

  btrfs: loop only once over data sizes array when inserting an item batch
  btrfs: unexport setup_items_for_insert()
  btrfs: use single bulk copy operations when logging directories

This is patch 1/3 and performance results, and the specific tests, are
included in the changelog of patch 3/3.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:08:03 +02:00
Qu Wenruo
c3a3b19bac btrfs: rename struct btrfs_io_bio to btrfs_bio 
Previously we had "struct btrfs_bio", which records IO context for
mirrored IO and RAID56, and "strcut btrfs_io_bio", which records extra
btrfs specific info for logical bytenr bio.

With "btrfs_bio" renamed to "btrfs_io_context", we are safe to rename
"btrfs_io_bio" to "btrfs_bio" which is a more suitable name now.

The struct btrfs_bio changes meaning by this commit. There was a
suggested name like btrfs_logical_bio but it's a bit long and we'd
prefer to use a shorter name.

This could be a concern for backports to older kernels where the
different meaning could possibly cause confusion or bugs. Comparing the
new and old structures, there's no overlap among the struct members so a
build would break in case of incorrect backport.

We haven't had many backports to bio code anyway so this is more of a
theoretical cause of bugs and a matter of precaution but we'll need to
keep the semantic change in mind.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:08:02 +02:00
Johannes Thumshirn
c2707a2556 btrfs: zoned: add a dedicated data relocation block group 
Relocation in a zoned filesystem can fail with a transaction abort with
error -22 (EINVAL). This happens because the relocation code assumes that
the extents we relocated the data to have the same size the source extents
had and ensures this by preallocating the extents.

But in a zoned filesystem we currently can't preallocate the extents as
this would break the sequential write required rule. Therefore it can
happen that the writeback process kicks in while we're still adding pages
to a delalloc range and starts writing out dirty pages.

This then creates destination extents that are smaller than the source
extents, triggering the following safety check in get_new_location():

 1034         if (num_bytes != btrfs_file_extent_disk_num_bytes(leaf, fi)) {
 1035                 ret = -EINVAL;
 1036                 goto out;
 1037         }

Temporarily create a dedicated block group for the relocation process, so
no non-relocation data writes can interfere with the relocation writes.

This is needed that we can switch the relocation process on a zoned
filesystem from the REQ_OP_ZONE_APPEND writing we use for data to a scheme
like in a non-zoned filesystem using REQ_OP_WRITE and preallocation.

Fixes: 32430c6148 ("btrfs: zoned: enable relocation on a zoned filesystem")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:08:01 +02:00
Johannes Thumshirn
37f00a6d2e btrfs: introduce btrfs_is_data_reloc_root 
There are several places in our codebase where we check if a root is the
root of the data reloc tree and subsequent patches will introduce more.

Factor out the check into a small helper function instead of open coding
it multiple times.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:08:01 +02:00
Naohiro Aota
afba2bc036 btrfs: zoned: implement active zone tracking 
Add zone_is_active flag to btrfs_block_group. This flag indicates the
underlying zones are all active. Such zone active block groups are tracked
by fs_info->active_bg_list.

btrfs_dev_{set,clear}_active_zone() take responsibility for the underlying
device part. They set/clear the bitmap to indicate zone activeness and
count the number of zones we can activate left.

btrfs_zone_{activate,finish}() take responsibility for the logical part and
the list management. In addition, btrfs_zone_finish() wait for any writes
on it and send REQ_OP_ZONE_FINISH to the zone.

Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:07:59 +02:00
Qu Wenruo
1ccc2e8a86 btrfs: defrag: pass file_ra_state instead of file to btrfs_defrag_file() 
Currently btrfs_defrag_file() accepts both "struct inode" and "struct
file" as parameter.  We can easily grab "struct inode" from "struct
file" using file_inode() helper.

The reason why we need "struct file" is just to re-use its f_ra.

Change this to pass "struct file_ra_state" parameter, so that it's more
clear what we really want.  Since we're here, also add some comments on
the function btrfs_defrag_file().

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-26 19:04:39 +02:00
Qu Wenruo
8481dd80ab btrfs: subpage: introduce btrfs_subpage_bitmap_info 
Currently we use fixed size u16 bitmap for subpage bitmap.  This is fine
for 4K sectorsize with 64K page size.

But for 4K sectorsize and larger page size, the bitmap is too small,
while for smaller page size like 16K, u16 bitmaps waste too much space.

Here we introduce a new helper structure, btrfs_subpage_bitmap_info, to
record the proper bitmap size, and where each bitmap should start at.

By this, we can later compact all subpage bitmaps into one u32 bitmap.
This patch is the first step.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-25 21:17:16 +02:00
Linus Torvalds
1986c10acc for-5.15-rc5-tag 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmFkq/oACgkQxWXV+ddt
 WDs10g//Qx27foBu0U3ovvsla0t8GgcqgzUyOx3zxed0MbOEQCtK6kqRHQ/I+9ap
 1Ec5y4qQqBwfp1NKlYdU/EiKBQIYbJO/nYhVIrFI/EZL/7qJTwyjYjrOjG9zIMvy
 2ekxuF/XVnM6p3hyRcuWMCxsossuK4XIkb0bSZrwk/nFA6nt+gbXR1oE94JitM8p
 0pwjvSVqpdTmOAIU5+oQldqL/By7un/rv+o6OTD9sJqTdQ1UMlHVDaa9mD8aCsYk
 XIiCYfkyo9rlbSAB5wmWuiAhske2xh7IXSr4l9mKxGOA0egbQAgmS1Zw3+Km7vFM
 t+ji/4rTFPFd2yv/sLCEnMinuwvBr3mnEh6pDHR76RNrI4CoK/GHmZSf7XyqzV8W
 QOftznNA9/nJInTULdhCDvNxbKhKKb+xeSP1L4uytnWc5am+WKOPLNkfczJUh3sq
 WUORpaUxByDol6BMsdQJqPVJ7CH5YI8lQzuQFoUTXDCgeQUBE2wE1s3q+5Ma+dNZ
 mamkfQim2R42nPk7RSQlFBeIyDBVBXWfSNvXNovrPFJyRmZqRWzh0nb3PS9VNnUy
 6oCOCIT7XlM4Jwh4ZR21OT66RNQQ/2sLUOU/4838TOOdn00UVBrFObHQ+ll8rq74
 Va9j0atj6iIn9c8lDQkqTek0pMDcmVGzb2MV6JA4BCbCL/lcGk8=
 =u3qV
 -----END PGP SIGNATURE-----

Merge tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more error handling fixes, stemming from code inspection, error
  injection or fuzzing"

* tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix abort logic in btrfs_replace_file_extents
  btrfs: check for error when looking up inode during dir entry replay
  btrfs: unify lookup return value when dir entry is missing
  btrfs: deal with errors when adding inode reference during log replay
  btrfs: deal with errors when replaying dir entry during log replay
  btrfs: deal with errors when checking if a dir entry exists during log replay
  btrfs: update refs for any root except tree log roots
  btrfs: unlock newly allocated extent buffer after error
 2021-10-11 16:48:19 -07:00
Filipe Manana
8dcbc26194 btrfs: unify lookup return value when dir entry is missing 
btrfs_lookup_dir_index_item() and btrfs_lookup_dir_item() lookup for dir
entries and both are used during log replay or when updating a log tree
during an unlink.

However when the dir item does not exists, btrfs_lookup_dir_item() returns
NULL while btrfs_lookup_dir_index_item() returns PTR_ERR(-ENOENT), and if
the dir item exists but there is no matching entry for a given name or
index, both return NULL. This makes the call sites during log replay to
be more verbose than necessary and it makes it easy to miss this slight
difference. Since we don't need to distinguish between those two cases,
make btrfs_lookup_dir_index_item() always return NULL when there is no
matching directory entry - either because there isn't any dir entry or
because there is one but it does not match the given name and index.

Also rename the argument 'objectid' of btrfs_lookup_dir_index_item() to
'index' since it is supposed to match an index number, and the name
'objectid' is not very good because it can easily be confused with an
inode number (like the inode number a dir entry points to).

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-10-07 22:06:32 +02:00
Linus Torvalds
815409a12c overlayfs update for 5.15 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYTDKKAAKCRDh3BK/laaZ
 PG9PAQCUF0fdBlCKudwSEt5PV5xemycL9OCAlYCd7d4XbBIe9wEA6sVJL9J+OwV2
 aF0NomiXtJccE+S9+byjVCyqSzQJGQQ=
 =6L2Y
 -----END PGP SIGNATURE-----

Merge tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs

Pull overlayfs update from Miklos Szeredi:

 - Copy up immutable/append/sync/noatime attributes (Amir Goldstein)

 - Improve performance by enabling RCU lookup.

 - Misc fixes and improvements

The reason this touches so many files is that the ->get_acl() method now
gets a "bool rcu" argument.  The ->get_acl() API was updated based on
comments from Al and Linus:

Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguQxpd6Wgc0Jd3ks77zcsAv_bn0q17L3VNnnmPKu11t8A@mail.gmail.com/

* tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: enable RCU'd ->get_acl()
  vfs: add rcu argument to ->get_acl() callback
  ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()
  ovl: use kvalloc in xattr copy-up
  ovl: update ctime when changing fileattr
  ovl: skip checking lower file's i_writecount on truncate
  ovl: relax lookup error on mismatch origin ftype
  ovl: do not set overlay.opaque for new directories
  ovl: add ovl_allow_offline_changes() helper
  ovl: disable decoding null uuid with redirect_dir
  ovl: consistent behavior for immutable/append-only inodes
  ovl: copy up sync/noatime fileattr flags
  ovl: pass ovl_fs to ovl_check_setxattr()
  fs: add generic helper for filling statx attribute flags
 2021-09-02 09:21:27 -07:00
Christian Brauner
4d4340c912 btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls 
Creating subvolumes and snapshots is one of the core features of btrfs
and is even available to unprivileged users. Make it possible to use
subvolume and snapshot creation on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-08-23 13:19:14 +02:00
Marcos Paulo de Souza
0ff40a910f btrfs: introduce btrfs_search_backwards function 
It's a common practice to start a search using offset (u64)-1, which is
the u64 maximum value, meaning that we want the search_slot function to
be set in the last item with the same objectid and type.

Once we are in this position, it's a matter to start a search backwards
by calling btrfs_previous_item, which will check if we'll need to go to
a previous leaf and other necessary checks, only to be sure that we are
in last offset of the same object and type.

The new btrfs_search_backwards function does the all these steps when
necessary, and can be used to avoid code duplication.

Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-08-23 13:19:09 +02:00
Boris Burkov
146054090b btrfs: initial fsverity support 
Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.

Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.

Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.

Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.

Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-08-23 13:19:09 +02:00
Boris Burkov
77eea05e78 btrfs: add ro compat flags to inodes 
Currently, inode flags are fully backwards incompatible in btrfs. If we
introduce a new inode flag, then tree-checker will detect it and fail.
This can even cause us to fail to mount entirely. To make it possible to
introduce new flags which can be read-only compatible, like VERITY, we
add new ro flags to btrfs without treating them quite so harshly in
tree-checker. A read-only file system can survive an unexpected flag,
and can be mounted.

As for the implementation, it unfortunately gets a little complicated.

The on-disk representation of the inode, btrfs_inode_item, has an __le64
for flags but the in-memory representation, btrfs_inode, uses a u32.
David Sterba had the nice idea that we could reclaim those wasted 32 bits
on disk and use them for the new ro_compat flags.

It turns out that the tree-checker code which checks for unknown flags
is broken, and ignores the upper 32 bits we are hoping to use. The issue
is that the flags use the literal 1 rather than 1ULL, so the flags are
signed ints, and one of them is specifically (1 << 31). As a result, the
mask which ORs the flags is a negative integer on machines where int is
32 bit twos complement. When tree-checker evaluates the expression:

  btrfs_inode_flags(leaf, iitem) & ~BTRFS_INODE_FLAG_MASK)

The mask is something like 0x80000abc, which gets promoted to u64 with
sign extension to 0xffffffff80000abc. Negating that 64 bit mask leaves
all the upper bits zeroed, and we can't detect unexpected flags.

This suggests that we can't use those bits after all. Luckily, we have
good reason to believe that they are zero anyway. Inode flags are
metadata, which is always checksummed, so any bit flips that would
introduce 1s would cause a checksum failure anyway (excluding the
improbable case of the checksum getting corrupted exactly badly).

Further, unless the 1 << 31 flag is used, the cast to u64 of the 32 bit
inode flag should preserve its value and not add leading zeroes
(at least for twos complement). The only place that flag
(BTRFS_INODE_ROOT_ITEM_INIT) is used is in a special inode embedded in
the root item, and indeed for that inode we see 0xffffffff80000000 as
the flags on disk. However, that inode is never seen by tree checker,
nor is it used in a context where verity might be meaningful.
Theoretically, a future ro flag might cause trouble on that inode, so we
should proactively clean up that mess before it does.

With the introduction of the new ro flags, keep two separate unsigned
masks and check them against the appropriate u32. Since we no longer run
afoul of sign extension, this also stops writing out 0xffffffff80000000
in root_item inodes going forward.

Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-08-23 13:19:09 +02:00
Josef Bacik
03fe78cc29 btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc 
We have been hitting some early ENOSPC issues in production with more
recent kernels, and I tracked it down to us simply not flushing delalloc
as aggressively as we should be.  With tracing I was seeing us failing
all tickets with all of the block rsvs at or around 0, with very little
pinned space, but still around 120MiB of outstanding bytes_may_used.
Upon further investigation I saw that we were flushing around 14 pages
per shrink call for delalloc, despite having around 2GiB of delalloc
outstanding.

Consider the example of a 8 way machine, all CPUs trying to create a
file in parallel, which at the time of this commit requires 5 items to
do.  Assuming a 16k leaf size, we have 10MiB of total metadata reclaim
size waiting on reservations.  Now assume we have 128MiB of delalloc
outstanding.  With our current math we would set items to 20, and then
set to_reclaim to 20 * 256k, or 5MiB.

Assuming that we went through this loop all 3 times, for both
FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop
twice, we'd only flush 60MiB of the 128MiB delalloc space.  This could
leave a fair bit of delalloc reservations still hanging around by the
time we go to ENOSPC out all the remaining tickets.

Fix this two ways.  First, change the calculations to be a fraction of
the total delalloc bytes on the system.  Prior to this change we were
calculating based on dirty inodes so our math made more sense, now it's
just completely unrelated to what we're actually doing.

Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've
gone through the flush states at least once.  This will empty the system
of all delalloc so we're sure to be truly out of space when we start
failing tickets.

I'm tagging stable 5.10 and forward, because this is where we started
using the page stuff heavily again.  This affects earlier kernel
versions as well, but would be a pain to backport to them as the
flushing mechanisms aren't the same.

CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-08-23 13:19:07 +02:00
David Sterba
809d6902b3 btrfs: make btrfs_next_leaf static inline 
btrfs_next_leaf is a simple wrapper for btrfs_next_old_leaf so move it
to header to avoid the function call overhead.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-08-23 13:19:02 +02:00
David Sterba
25c1252a02 btrfs: switch uptodate to bool in btrfs_writepage_endio_finish_ordered 
The uptodate parameter should be bool, change the type.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-08-23 13:19:02 +02:00
Qu Wenruo
a129ffb816 btrfs: remove unused start and end parameters from btrfs_run_delalloc_range() 
Since commit d75855b451 ("btrfs: Remove
extent_io_ops::writepage_start_hook") removes the writepage_start_hook()
and adds btrfs_writepage_cow_fixup() function, there is no need to
follow the old hook parameters.

Remove the @start and @end hook, since currently the fixup check is full
page check, it doesn't need @start and @end hook.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-08-23 13:19:02 +02:00
Johannes Thumshirn
5a80d1c6a2 btrfs: zoned: remove max_zone_append_size logic 
There used to be a patch in the original series for zoned support which
limited the extent size to max_zone_append_size, but this patch has been
dropped somewhere around v9.

We've decided to go the opposite direction, instead of limiting extents
in the first place we split them before submission to comply with the
device's limits.

Remove the related code, btrfs_fs_info::max_zone_append_size and
btrfs_zoned_device_info::max_zone_append_size.

This also removes the workaround for dm-crypt introduced in
1d68128c10 ("btrfs: zoned: fail mount if the device does not support
zone append") because the fix has been merged as f34ee1dce6 ("dm
crypt: Fix zoned block device support").

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-08-23 13:18:58 +02:00
Miklos Szeredi
0cad624662 vfs: add rcu argument to ->get_acl() callback 
Add a rcu argument to the ->get_acl() callback to allow
get_cached_acl_rcu() to call the ->get_acl() method in the next patch.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
 2021-08-18 22:08:24 +02:00
Nikolay Borisov
629e33a168 btrfs: remove unused btrfs_fs_info::total_pinned 
This got added 14 years ago in 324ae4df00 ("Btrfs: Add block group
pinned accounting back") but it was not ever used. Subsequently its
usage got gradually removed in 8790d502e4 ("Btrfs: Add support for
mirroring across drives") and 11833d66be ("Btrfs: improve async block
group caching"). Let's remove it for good!

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-22 19:58:26 +02:00
Josef Bacik
c416a30cdd btrfs: rip out may_commit_transaction 
may_commit_transaction was introduced before the ticketing
infrastructure existed.  There was a problem where we'd legitimately be
out of space, but every reservation would trigger a transaction commit
and then fail.  Thus if you had 1000 things trying to make a
reservation, they'd all do the flushing loop and thus commit the
transaction 1000 times before they'd get their ENOSPC.

This helper was introduced to short circuit this, if there wasn't space
that could be reclaimed by committing the transaction then simply ENOSPC
out.  This made true ENOSPC tests much faster as we didn't waste a bunch
of time.

However many of our bugs over the years have been from cases where we
didn't account for some space that would be reclaimed by committing a
transaction.  The delayed refs rsv space, delayed rsv, many pinned bytes
miscalculations, etc.  And in the meantime the original problem has been
solved with ticketing.  We no longer will commit the transaction 1000
times.  Instead we'll get 1000 waiters, we will go through the flushing
mechanisms, and if there's no progress after 2 loops we ENOSPC everybody
out.  The ticketing infrastructure gives us a deterministic way to see
if we're making progress or not, thus we avoid a lot of extra work.

So simplify this step by simply unconditionally committing the
transaction.  This removes what is arguably our most common source of
early ENOSPC bugs and will allow us to drastically simplify many of the
things we track because we simply won't need them with this stuff gone.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-22 14:50:45 +02:00
Filipe Manana
1cea5cf0e6 btrfs: ensure relocation never runs while we have send operations running 
Relocation and send do not play well together because while send is
running a block group can be relocated, a transaction committed and
the respective disk extents get re-allocated and written to or discarded
while send is about to do something with the extents.

This was explained in commit 9e967495e0 ("Btrfs: prevent send failures
and crashes due to concurrent relocation"), which prevented balance and
send from running in parallel but it did not address one remaining case
where chunk relocation can happen: shrinking a device (and device deletion
which shrinks a device's size to 0 before deleting the device).

We also have now one more case where relocation is triggered: on zoned
filesystems partially used block groups get relocated by a background
thread, introduced in commit 18bb8bbf13 ("btrfs: zoned: automatically
reclaim zones").

So make sure that instead of preventing balance from running when there
are ongoing send operations, we prevent relocation from happening.
This uses the infrastructure recently added by a patch that has the
subject: "btrfs: add cancellable chunk relocation support".

Also it adds a spinlock used exclusively for the exclusivity between
send and relocation, as before fs_info->balance_mutex was used, which
would make an attempt to run send to block waiting for balance to
finish, which can take a lot of time on large filesystems.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-22 14:11:58 +02:00
David Sterba
cbeaae4f6f btrfs: shorten integrity checker extent data mount option 
Subjectively, CHECK_INTEGRITY_INCLUDING_EXTENT_DATA is quite long and
calling it CHECK_INTEGRITY_DATA still keeps the meaning and matches the
mount option name.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-22 14:11:58 +02:00
David Sterba
ccd9395b52 btrfs: switch mount option bits to enums and use wider type 
Switch defines of BTRFS_MOUNT_* to an enum (the symbolic names are
recorded in the debugging information for convenience).

There are two more things done but separating them would not make much
sense as it's touching the same lines:

- Renumber shifts 18..31 to 17..30 to get rid of the hole in the
  sequence.

- Use 1UL as the value that gets shifted because we're approaching the
  32bit limit and due to integer promotions the value of (1 << 31)
  becomes 0xffffffff80000000 when cast to unsigned long (eg. the option
  manipulating helpers).

  This is not causing any problems yet as the operations are in-memory
  and masking the 31st bit works, we don't have more than 31 bits so the
  ill effects of not masking higher bits don't happen. But once we have
  more, the problems will emerge.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-22 14:11:58 +02:00
David Sterba
1a9fd4172d btrfs: fix typos in comments 
Fix typos that have snuck in since the last round. Found by codespell.

Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-22 14:11:57 +02:00
Qu Wenruo
d2a9106448 btrfs: make btrfs_set_range_writeback() subpage compatible 
Function btrfs_set_range_writeback() currently just sets the page
writeback unconditionally.

Change it to call the subpage helper so that we can handle both cases
well.

Since the subpage helpers needs btrfs_fs_info, also change the parameter
to accept btrfs_inode.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:10 +02:00
Qu Wenruo
f57ad93735 btrfs: rename PagePrivate2 to PageOrdered inside btrfs 
Inside btrfs we use Private2 page status to indicate we have an ordered
extent with pending IO for the sector.

But the page status name, Private2, tells us nothing about the bit
itself, so this patch will rename it to Ordered.
And with extra comment about the bit added, so reader who is still
uncertain about the page Ordered status, will find the comment pretty
easily.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:09 +02:00
Qu Wenruo
38a39ac77e btrfs: pass btrfs_inode to btrfs_writepage_endio_finish_ordered() 
There is a pretty bad abuse of btrfs_writepage_endio_finish_ordered() in
end_compressed_bio_write().

It passes compressed pages to btrfs_writepage_endio_finish_ordered(),
which is only supposed to accept inode pages.

Thankfully the important info here is the inode, so let's pass
btrfs_inode directly into btrfs_writepage_endio_finish_ordered(), and
make @page parameter optional.

By this, end_compressed_bio_write() can happily pass page=NULL while
still getting everything done properly.

Also, to cooperate with such modification, replace @page parameter for
trace_btrfs_writepage_end_io_hook() with btrfs_inode.
Although this removes page_index info, the existing start/len should be
enough for most usage.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:08 +02:00
Qu Wenruo
390ed29b81 btrfs: refactor submit_extent_page() to make bio and its flag tracing easier 
There is a lot of code inside extent_io.c needs both "struct bio
**bio_ret" and "unsigned long prev_bio_flags", along with some
parameters like "unsigned long bio_flags".

Such strange parameters are here for bio assembly.

For example, we have such inode page layout:

  0       4K      8K      12K
  |<-- Extent A-->|<- EB->|

Then what we do is:

- Page [0, 4K)
  *bio_ret = NULL
  So we allocate a new bio to bio_ret,
  Add page [0, 4K) to *bio_ret.

- Page [4K, 8K)
  *bio_ret != NULL
  We found this page is continuous to *bio_ret,
  and if we're not at stripe boundary, we
  add page [4K, 8K) to *bio_ret.

- Page [8K, 12K)
  *bio_ret != NULL
  But we found this page is not continuous, so
  we submit *bio_ret, then allocate a new bio,
  and add page [8K, 12K) to the new bio.

This means we need to record both the bio and its bio_flag, but we
record them manually using those strange parameter list, other than
encapsulating them into their own structure.

So this patch will introduce a new structure, btrfs_bio_ctrl, to record
both the bio, and its bio_flags.

Also, in above case, for all pages added to the bio, we need to check if
the new page crosses stripe boundary.  This check itself can be time
consuming, and we don't really need to do that for each page.

This patch also integrates the stripe boundary check into btrfs_bio_ctrl.
When a new bio is allocated, the stripe and ordered extent boundary is
also calculated, so no matter how large the bio will be, we only
calculate the boundaries once, to save some CPU time.

The following functions/structures are affected:

- struct extent_page_data
  Replace its bio pointer with structure btrfs_bio_ctrl (embedded
  structure, not pointer)

- end_write_bio()
- flush_write_bio()
  Just change how bio is fetched

- btrfs_bio_add_page()
  Use pre-calculated boundaries instead of re-calculating them.
  And use @bio_ctrl to replace @bio and @prev_bio_flags.

- calc_bio_boundaries()
  New function

- submit_extent_page() callers
- btrfs_do_readpage() callers
- contiguous_readpages() callers
  To Use @bio_ctrl to replace @bio and @prev_bio_flags, and how to grab
  bio.

- btrfs_bio_fits_in_ordered_extent()
  Removed, as now the ordered extent size limit is done at bio
  allocation time, no need to check for each page range.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:08 +02:00
David Sterba
578bda9e17 btrfs: introduce try-lock semantics for exclusive op start 
Add try-lock for exclusive operation start to allow callers to do more
checks. The same operation must already be running. The try-lock and
unlock must pair and are a substitute for btrfs_exclop_start, thus it
must also pair with btrfs_exclop_finish to release the exclop context.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:07 +02:00
David Sterba
907d2710d7 btrfs: add cancellable chunk relocation support 
Add support code that will allow canceling relocation on the chunk
granularity. This is different and independent of balance, that also
uses relocation but is a higher level operation and manages it's own
state and pause/cancellation requests.

Relocation is used for resize (shrink) and device deletion so this will
be a common point to implement cancellation for both. The context is
entirely in btrfs_relocate_block_group and btrfs_recover_relocation,
enclosing one chunk relocation. The status bit is set and unset between
the chunks. As relocation can take long, the effects may not be
immediate and the request and actual action can slightly race.

The fs_info::reloc_cancel_req is only supposed to be increased and does
not pair with decrement like fs_info::balance_cancel_req.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:07 +02:00
David Sterba
0d7ed32c1e btrfs: protect exclusive_operation by super_lock 
The exclusive operation is now atomically checked and set using bit
operations. Switch it to protection by spinlock. The super block lock is
not frequently used and adding a new lock seems like an overkill so it
should be safe to reuse it.

The reason to use spinlock is to enhance the locking context so more
checks can be done, eg. allowing the same exclusive operation enter
the exclop section and cancel the running one. This will be used for
resize and device delete.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:06 +02:00
David Sterba
49547068f6 btrfs: document byte swap optimization of root_item::flags accessors 
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:06 +02:00
Filipe Manana
0d7d316597 btrfs: don't set the full sync flag when truncation does not touch extents 
At btrfs_truncate() where we truncate the inode either to the same size
or to a smaller size, we always set the full sync flag on the inode.

This is needed in case the truncation drops or trims any file extent items
that start beyond or cross the new inode size, so that the next fsync
drops all inode items from the log and scans again the fs/subvolume tree
to find all items that must be logged.

However if the truncation does not drop or trims any file extent items, we
do not need to set the full sync flag and force the next fsync to use the
slow code path. So do not set the full sync flag in such cases.

One use case where it is frequent to do truncations that do not change
the inode size and do not drop any extents (no prealloc extents beyond
i_size) is when running Microsoft's SQL Server inside a Docker container.
One example workload is the one Philipp Fent reported recently, in the
thread with a link below. In this workload a large number of fsyncs are
preceded by such truncate operations.

After this change I constantly get the runtime for that workload from
Philipp to be reduced by about -12%, for example from 184 seconds down
to 162 seconds.

Link: https://lore.kernel.org/linux-btrfs/93c4600e-5263-5cba-adf0-6f47526e7561@in.tum.de/
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:05 +02:00
Qu Wenruo
08508fea07 btrfs: make btrfs_verify_data_csum() to return a bitmap 
This will provide the basis for later per-sector repair for subpage,
while still keeping the existing code happy.

As if all csums match, the return value will be 0, same as now.
Only when csum mismatches, the return value is different.

The new return value will be a bitmap, for 4K sectorsize and 4K page
size, it will be either 1, instead of the -EIO (which is not used
directly by the callers, no effective change).

But for 4K sectorsize and 64K page size, aka subpage case, since the
bvec can contain multiple sectors, knowing which sectors are corrupted
will allow us to submit repair only for corrupted sectors.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-06-21 15:19:05 +02:00
Linus Torvalds
142b507f91 for-5.13-rc1-tag 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmCZnCIACgkQxWXV+ddt
 WDuEvhAAmC+Mkrz25GbQnSIp2FKYCCQK34D0rdghml0Bc0cJcDh3yhgIB6ZTHZ7e
 Z+UZu84ISK31OHKDzXtX0MINN2wuU4u4kd6PHtYj0wSVl3cX6E/K5j6YcThfI1Ru
 vCW5O87V9SCV5NnykIFt3sbYvsPKtF9lhgPQprj4np+wxaSyNlEF2c+zLTI3J7NV
 +8OlM4oi8GocZd1aAwGpVM3qUPyQSHEb9oUEp6aV1ERuAs6LIyeGks3Cag6gjPnq
 dYz3jV9HyZB5GtX0dmv4LeRFIog1uFi+SIEFl5RpqhB3sXN3n6XHMka4x20FXiWy
 PfX9+Nf4bQGx6F9rGsgHNHQP5dVhHAkZcq3E0n0yshIfNe8wDHBRlmk0wbfj4K7I
 VYv85SxEYpigG8KzF5gjiar4EqsaJVQcJioMxVE7z9vrW6xlOWD1lf/ViUZnB3wd
 IQEyGz2qOe9eqJD+dnyN7QkN9WKGSUr2p1Q/DngCIwFzKWf1qIlETNXrIL+AZ97r
 v4G5mMq9dCxs3s8c5SGbdF9qqK8gEuaV3iWQAoKOciuy6fbc553Q90I1v3OhW+by
 j2yVoo3nJbBJBuLBNWPDUlwxQF/EHPQ6nh3fvxNRgwksXgRmqywdJb5dQ8hcKgSH
 RsvinJhtKo5rTgtgGgmNvmLAjKIieW1lIVG4ha0O/m49HeaohDE=
 =GNNs
 -----END PGP SIGNATURE-----

Merge tag 'for-5.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "First batch of various fixes, here's a list of notable ones:

   - fix unmountable seed device after fstrim

   - fix silent data loss in zoned mode due to ordered extent splitting

   - fix race leading to unpersisted data and metadata on fsync

   - fix deadlock when cloning inline extents and using qgroups"

* tag 'for-5.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: initialize return variable in cleanup_free_space_cache_v1
  btrfs: zoned: sanity check zone type
  btrfs: fix unmountable seed device after fstrim
  btrfs: fix deadlock when cloning inline extents and using qgroups
  btrfs: fix race leading to unpersisted data and metadata on fsync
  btrfs: do not consider send context as valid when trying to flush qgroups
  btrfs: zoned: fix silent data loss after failure splitting ordered extent
 2021-05-10 14:10:42 -07:00
Filipe Manana
f9baa501b4 btrfs: fix deadlock when cloning inline extents and using qgroups 
There are a few exceptional cases where cloning an inline extent needs to
copy the inline extent data into a page of the destination inode.

When this happens, we end up starting a transaction while having a dirty
page for the destination inode and while having the range locked in the
destination's inode iotree too. Because when reserving metadata space
for a transaction we may need to flush existing delalloc in case there is
not enough free space, we have a mechanism in place to prevent a deadlock,
which was introduced in commit 3d45f221ce ("btrfs: fix deadlock when
cloning inline extent and low on free metadata space").

However when using qgroups, a transaction also reserves metadata qgroup
space, which can also result in flushing delalloc in case there is not
enough available space at the moment. When this happens we deadlock, since
flushing delalloc requires locking the file range in the inode's iotree
and the range was already locked at the very beginning of the clone
operation, before attempting to start the transaction.

When this issue happens, stack traces like the following are reported:

  [72747.556262] task:kworker/u81:9   state:D stack:    0 pid:  225 ppid:     2 flags:0x00004000
  [72747.556268] Workqueue: writeback wb_workfn (flush-btrfs-1142)
  [72747.556271] Call Trace:
  [72747.556273]  __schedule+0x296/0x760
  [72747.556277]  schedule+0x3c/0xa0
  [72747.556279]  io_schedule+0x12/0x40
  [72747.556284]  __lock_page+0x13c/0x280
  [72747.556287]  ? generic_file_readonly_mmap+0x70/0x70
  [72747.556325]  extent_write_cache_pages+0x22a/0x440 [btrfs]
  [72747.556331]  ? __set_page_dirty_nobuffers+0xe7/0x160
  [72747.556358]  ? set_extent_buffer_dirty+0x5e/0x80 [btrfs]
  [72747.556362]  ? update_group_capacity+0x25/0x210
  [72747.556366]  ? cpumask_next_and+0x1a/0x20
  [72747.556391]  extent_writepages+0x44/0xa0 [btrfs]
  [72747.556394]  do_writepages+0x41/0xd0
  [72747.556398]  __writeback_single_inode+0x39/0x2a0
  [72747.556403]  writeback_sb_inodes+0x1ea/0x440
  [72747.556407]  __writeback_inodes_wb+0x5f/0xc0
  [72747.556410]  wb_writeback+0x235/0x2b0
  [72747.556414]  ? get_nr_inodes+0x35/0x50
  [72747.556417]  wb_workfn+0x354/0x490
  [72747.556420]  ? newidle_balance+0x2c5/0x3e0
  [72747.556424]  process_one_work+0x1aa/0x340
  [72747.556426]  worker_thread+0x30/0x390
  [72747.556429]  ? create_worker+0x1a0/0x1a0
  [72747.556432]  kthread+0x116/0x130
  [72747.556435]  ? kthread_park+0x80/0x80
  [72747.556438]  ret_from_fork+0x1f/0x30

  [72747.566958] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
  [72747.566961] Call Trace:
  [72747.566964]  __schedule+0x296/0x760
  [72747.566968]  ? finish_wait+0x80/0x80
  [72747.566970]  schedule+0x3c/0xa0
  [72747.566995]  wait_extent_bit.constprop.68+0x13b/0x1c0 [btrfs]
  [72747.566999]  ? finish_wait+0x80/0x80
  [72747.567024]  lock_extent_bits+0x37/0x90 [btrfs]
  [72747.567047]  btrfs_invalidatepage+0x299/0x2c0 [btrfs]
  [72747.567051]  ? find_get_pages_range_tag+0x2cd/0x380
  [72747.567076]  __extent_writepage+0x203/0x320 [btrfs]
  [72747.567102]  extent_write_cache_pages+0x2bb/0x440 [btrfs]
  [72747.567106]  ? update_load_avg+0x7e/0x5f0
  [72747.567109]  ? enqueue_entity+0xf4/0x6f0
  [72747.567134]  extent_writepages+0x44/0xa0 [btrfs]
  [72747.567137]  ? enqueue_task_fair+0x93/0x6f0
  [72747.567140]  do_writepages+0x41/0xd0
  [72747.567144]  __filemap_fdatawrite_range+0xc7/0x100
  [72747.567167]  btrfs_run_delalloc_work+0x17/0x40 [btrfs]
  [72747.567195]  btrfs_work_helper+0xc2/0x300 [btrfs]
  [72747.567200]  process_one_work+0x1aa/0x340
  [72747.567202]  worker_thread+0x30/0x390
  [72747.567205]  ? create_worker+0x1a0/0x1a0
  [72747.567208]  kthread+0x116/0x130
  [72747.567211]  ? kthread_park+0x80/0x80
  [72747.567214]  ret_from_fork+0x1f/0x30

  [72747.569686] task:fsstress        state:D stack:    0 pid:841421 ppid:841417 flags:0x00000000
  [72747.569689] Call Trace:
  [72747.569691]  __schedule+0x296/0x760
  [72747.569694]  schedule+0x3c/0xa0
  [72747.569721]  try_flush_qgroup+0x95/0x140 [btrfs]
  [72747.569725]  ? finish_wait+0x80/0x80
  [72747.569753]  btrfs_qgroup_reserve_data+0x34/0x50 [btrfs]
  [72747.569781]  btrfs_check_data_free_space+0x5f/0xa0 [btrfs]
  [72747.569804]  btrfs_buffered_write+0x1f7/0x7f0 [btrfs]
  [72747.569810]  ? path_lookupat.isra.48+0x97/0x140
  [72747.569833]  btrfs_file_write_iter+0x81/0x410 [btrfs]
  [72747.569836]  ? __kmalloc+0x16a/0x2c0
  [72747.569839]  do_iter_readv_writev+0x160/0x1c0
  [72747.569843]  do_iter_write+0x80/0x1b0
  [72747.569847]  vfs_writev+0x84/0x140
  [72747.569869]  ? btrfs_file_llseek+0x38/0x270 [btrfs]
  [72747.569873]  do_writev+0x65/0x100
  [72747.569876]  do_syscall_64+0x33/0x40
  [72747.569879]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

  [72747.569899] task:fsstress        state:D stack:    0 pid:841424 ppid:841417 flags:0x00004000
  [72747.569903] Call Trace:
  [72747.569906]  __schedule+0x296/0x760
  [72747.569909]  schedule+0x3c/0xa0
  [72747.569936]  try_flush_qgroup+0x95/0x140 [btrfs]
  [72747.569940]  ? finish_wait+0x80/0x80
  [72747.569967]  __btrfs_qgroup_reserve_meta+0x36/0x50 [btrfs]
  [72747.569989]  start_transaction+0x279/0x580 [btrfs]
  [72747.570014]  clone_copy_inline_extent+0x332/0x490 [btrfs]
  [72747.570041]  btrfs_clone+0x5b7/0x7a0 [btrfs]
  [72747.570068]  ? lock_extent_bits+0x64/0x90 [btrfs]
  [72747.570095]  btrfs_clone_files+0xfc/0x150 [btrfs]
  [72747.570122]  btrfs_remap_file_range+0x3d8/0x4a0 [btrfs]
  [72747.570126]  do_clone_file_range+0xed/0x200
  [72747.570131]  vfs_clone_file_range+0x37/0x110
  [72747.570134]  ioctl_file_clone+0x7d/0xb0
  [72747.570137]  do_vfs_ioctl+0x138/0x630
  [72747.570140]  __x64_sys_ioctl+0x62/0xc0
  [72747.570143]  do_syscall_64+0x33/0x40
  [72747.570146]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

So fix this by skipping the flush of delalloc for an inode that is
flagged with BTRFS_INODE_NO_DELALLOC_FLUSH, meaning it is currently under
such a special case of cloning an inline extent, when flushing delalloc
during qgroup metadata reservation.

The special cases for cloning inline extents were added in kernel 5.7 by
by commit 05a5a7621c ("Btrfs: implement full reflink support for
inline extents"), while having qgroup metadata space reservation flushing
delalloc when low on space was added in kernel 5.9 by commit
c53e965360 ("btrfs: qgroup: try to flush qgroup space when we get
-EDQUOT"). So use a "Fixes:" tag for the later commit to ease stable
kernel backports.

Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Link: https://lore.kernel.org/linux-btrfs/20210421083137.31E3.409509F4@e16-tech.com/
Fixes: c53e965360 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT")
CC: stable@vger.kernel.org # 5.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-28 20:09:47 +02:00
Linus Torvalds
a4f7fae101 Merge branch 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 
Pull fileattr conversion updates from Miklos Szeredi via Al Viro:
 "This splits the handling of FS_IOC_[GS]ETFLAGS from ->ioctl() into a
  separate method.

  The interface is reasonably uniform across the filesystems that
  support it and gives nice boilerplate removal"

* 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
  ovl: remove unneeded ioctls
  fuse: convert to fileattr
  fuse: add internal open/release helpers
  fuse: unsigned open flags
  fuse: move ioctl to separate source file
  vfs: remove unused ioctl helpers
  ubifs: convert to fileattr
  reiserfs: convert to fileattr
  ocfs2: convert to fileattr
  nilfs2: convert to fileattr
  jfs: convert to fileattr
  hfsplus: convert to fileattr
  efivars: convert to fileattr
  xfs: convert to fileattr
  orangefs: convert to fileattr
  gfs2: convert to fileattr
  f2fs: convert to fileattr
  ext4: convert to fileattr
  ext2: convert to fileattr
  btrfs: convert to fileattr
  ...
 2021-04-27 11:18:24 -07:00
Johannes Thumshirn
18bb8bbf13 btrfs: zoned: automatically reclaim zones 
When a file gets deleted on a zoned file system, the space freed is not
returned back into the block group's free space, but is migrated to
zone_unusable.

As this zone_unusable space is behind the current write pointer it is not
possible to use it for new allocations. In the current implementation a
zone is reset once all of the block group's space is accounted as zone
unusable.

This behaviour can lead to premature ENOSPC errors on a busy file system.

Instead of only reclaiming the zone once it is completely unusable,
kick off a reclaim job once the amount of unusable bytes exceeds a user
configurable threshold between 51% and 100%. It can be set per mounted
filesystem via the sysfs tunable bg_reclaim_threshold which is set to 75%
by default.

Similar to reclaiming unused block groups, these dirty block groups are
added to a to_reclaim list and then on a transaction commit, the reclaim
process is triggered but after we deleted unused block groups, which will
free space for the relocation process.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-20 20:46:31 +02:00
Johannes Thumshirn
f33720657d btrfs: rename delete_unused_bgs_mutex to reclaim_bgs_lock 
As a preparation for extending the block group deletion use case, rename
the unused_bgs_mutex to reclaim_bgs_lock.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-20 20:30:18 +02:00
Qu Wenruo
e9306ad4ef btrfs: more graceful errors/warnings on 32bit systems when reaching limits 
Btrfs uses internally mapped u64 address space for all its metadata.
Due to the page cache limit on 32bit systems, btrfs can't access
metadata at or beyond (ULONG_MAX + 1) << PAGE_SHIFT. See
how MAX_LFS_FILESIZE and page::index are defined.  This is 16T for 4K
page size while 256T for 64K page size.

Users can have a filesystem which doesn't have metadata beyond the
boundary at mount time, but later balance can cause it to create
metadata beyond the boundary.

And modification to MM layer is unrealistic just for such minor use
case. We can't do more than to prevent mounting such filesystem or warn
early when the numbers are still within the limits.

To address such problem, this patch will introduce the following checks:

- Mount time rejection
  This will reject any fs which has metadata chunk at or beyond the
  boundary.

- Mount time early warning
  If there is any metadata chunk beyond 5/8th of the boundary, we do an
  early warning and hope the end user will see it.

- Runtime extent buffer rejection
  If we're going to allocate an extent buffer at or beyond the boundary,
  reject such request with EOVERFLOW.
  This is definitely going to cause problems like transaction abort, but
  we have no better ways.

- Runtime extent buffer early warning
  If an extent buffer beyond 5/8th of the max file size is allocated, do
  an early warning.

Above error/warning message will only be printed once for each fs to
reduce dmesg flood.

If the mount is rejected, the filesystem will be mountable only on a
64bit host.

Link: https://lore.kernel.org/linux-btrfs/1783f16d-7a28-80e6-4c32-fdf19b705ed0@gmx.com/
Reported-by: Erik Jensen <erikjensen@rkjnsn.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-20 19:56:50 +02:00
Filipe Manana
ace75066ce btrfs: improve btree readahead for full send operations 
Currently a full send operation uses the standard btree readahead when
iterating over the subvolume/snapshot btree, which despite bringing good
performance benefits, it could be improved in a few aspects for use cases
such as full send operations, which are guaranteed to visit every node
and leaf of a btree, in ascending and sequential order. The limitations
of that standard btree readahead implementation are the following:

1) It only triggers readahead for leaves that are physically close
   to the leaf being read, within a 64K range;

2) It only triggers readahead for the next or previous leaves if the
   leaf being read is not currently in memory;

3) It never triggers readahead for nodes.

So add a new readahead mode that addresses all these points and use it
for full send operations.

The following test script was used to measure the improvement on a box
using an average, consumer grade, spinning disk and with 16GiB of RAM:

  $ cat test.sh
  #!/bin/bash

  DEV=/dev/sdj
  MNT=/mnt/sdj
  MKFS_OPTIONS="--nodesize 16384"     # default, just to be explicit
  MOUNT_OPTIONS="-o max_inline=2048"  # default, just to be explicit

  mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null
  mount $MOUNT_OPTIONS $DEV $MNT

  # Create files with inline data to make it easier and faster to create
  # large btrees.
  add_files()
  {
      local total=$1
      local start_offset=$2
      local number_jobs=$3
      local total_per_job=$(($total / $number_jobs))

      echo "Creating $total new files using $number_jobs jobs"
      for ((n = 0; n < $number_jobs; n++)); do
          (
              local start_num=$(($start_offset + $n * $total_per_job))
              for ((i = 1; i <= $total_per_job; i++)); do
                  local file_num=$((start_num + $i))
                  local file_path="$MNT/file_${file_num}"
                  xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null
                  if [ $? -ne 0 ]; then
                      echo "Failed creating file $file_path"
                      break
                  fi
              done
          ) &
          worker_pids[$n]=$!
      done

      wait ${worker_pids[@]}

      sync
      echo
      echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)"
  }

  initial_file_count=500000
  add_files $initial_file_count 0 4

  echo
  echo "Creating first snapshot..."
  btrfs subvolume snapshot -r $MNT $MNT/snap1

  echo
  echo "Adding more files..."
  add_files $((initial_file_count / 4)) $initial_file_count 4

  echo
  echo "Updating 1/50th of the initial files..."
  for ((i = 1; i < $initial_file_count; i += 50)); do
      xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null
  done

  echo
  echo "Creating second snapshot..."
  btrfs subvolume snapshot -r $MNT $MNT/snap2

  umount $MNT

  echo 3 > /proc/sys/vm/drop_caches
  blockdev --flushbufs $DEV &> /dev/null
  hdparm -F $DEV &> /dev/null

  mount $MOUNT_OPTIONS $DEV $MNT

  echo
  echo "Testing full send..."
  start=$(date +%s)
  btrfs send $MNT/snap1 > /dev/null
  end=$(date +%s)
  echo
  echo "Full send took $((end - start)) seconds"

  umount $MNT

The durations of the full send operation in seconds were the following:

Before this change:  217 seconds
After this change:   205 seconds (-5.7%)

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-19 17:25:17 +02:00
Filipe Manana
bc03f39ec3 btrfs: use a bit to track the existence of tree mod log users 
The tree modification log functions are called very frequently, basically
they are called every time a btree is modified (a pointer added or removed
to a node, a new root for a btree is set, etc). Because of that, to avoid
heavy lock contention on the lock that protects the list of tree mod log
users, we have checks that test the emptiness of the list with a full
memory barrier before the checks, so that when there are no tree mod log
users we avoid taking the lock.

Replace the memory barrier and list emptiness check with a test for a new
bit set at fs_info->flags. This bit is used to indicate when there are
tree mod log users, set whenever a user is added to the list and cleared
when the last user is removed from the list. This makes the intention a
bit more obvious and possibly more efficient (assuming test_bit() may be
cheaper than a full memory barrier on some architectures).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-19 17:25:16 +02:00
Filipe Manana
f3a84ccd28 btrfs: move the tree mod log code into its own file 
The tree modification log, which records modifications done to btrees, is
quite large and currently spread all over ctree.c, which is a huge file
already.

To make things better organized, move all that code into its own separate
source and header files. Functions and definitions that are used outside
of the module (mostly by ctree.c) are renamed so that they start with a
"btrfs_" prefix. Everything else remains unchanged.

This makes it easier to go over the tree modification log code every
time I need to go read it to fix a bug.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-19 17:25:16 +02:00
Johannes Thumshirn
cea628008f btrfs: remove duplicated in_range() macro 
The in_range() macro is defined twice in btrfs' source, once in ctree.h
and once in misc.h.

Remove the definition in ctree.h and include misc.h in the files depending
on it.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-19 17:25:16 +02:00
Josef Bacik
8318ba79ee btrfs: add a i_mmap_lock to our inode 
We need to be able to exclude page_mkwrite from happening concurrently
with certain operations.  To facilitate this, add a i_mmap_lock to our
inode, down_read() it in our mkwrite, and add a new ILOCK flag to
indicate that we want to take the i_mmap_lock as well.  I used pahole to
check the size of the btrfs_inode, the sizes are as follows

no lockdep:
before: 1120 (3 per 4k page)
after: 1160 (3 per 4k page)

lockdep:
before: 2072 (1 per 4k page)
after: 2224 (1 per 4k page)

We're slightly larger but it doesn't change how many objects we can fit
per page.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-19 17:25:15 +02:00
Goldwyn Rodrigues
5e295768a0 btrfs: remove mirror argument from btrfs_csum_verify_data() 
The parameter mirror is not used and does not make sense for checksum
verification of the given bio.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-19 17:25:15 +02:00
Anand Jain
05947ae186 btrfs: unexport btrfs_extent_readonly() and make it static 
btrfs_extent_readonly() is used by can_nocow_extent() in inode.c. So
move it from extent-tree.c to inode.c and declare it as static.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-19 17:25:14 +02:00
Nikolay Borisov
bfc78479eb btrfs: make btrfs_replace_file_extents take btrfs_inode 
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-04-19 17:25:14 +02:00
Miklos Szeredi
97fc297754 btrfs: convert to fileattr 
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: David Sterba <dsterba@suse.com>
 2021-04-12 15:04:29 +02:00
Linus Torvalds
c608aca57d for-5.12-rc1-tag 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmA85UwACgkQxWXV+ddt
 WDsdeA/8DXM6pMGaLkYcvkGvR53/vWwQlKq+i+3zuc41fYFJ7k+DQ7/K5hDbEMoM
 E7YsksoRlNVruH/ZvSdtx1exQ/tNrTdqPuds/UR31lIvS2NX9OZZToGWoC8VmrNw
 eS9yAwz/7JKUBA6MlMxZFv89OJoHUX9brPSeZVA8hOo3jDr5LXVm0IBskYOBUDRx
 JIvt+lkJLKMXPWxwUt3hbkbFPAUQVxYYavhJhWiXT9gdxF+eRgjMI0EN43vBMN2y
 kZtoZGeWR64heo9ehFzYMDlAVyph/loGovQ7m6XVzkk5DQGitg0vs3iAG46WjEXt
 jxt0ZKmJQwJb3/zNPd8VlLMhULGc56jcq8uhaC2pXjhy18p7EAXml+fH51BExLYK
 11hiWtWsrbTsZuYgr6fpqVFukkL/yyH/s7iCWT8Wn+AoPg2fUD99F5nkKT2T0Sso
 t7MyJVlTdq8avWbTB+8kFx8+Hy1TsRz3Ic2Zpm8+F3KeVflrb31jJIp3cxPCdfUp
 fWX+7VDjKVt00Ti7uP0fAaFO4hn2FjYcWzR3KOjomWox+8LVxB8PbD4H8jD7As2a
 5gGGOULmkiZej7hcP6J6zvnmgZIVAGPsSGSVfZtPh4VGiycL3DozcD0x5QerLchR
 NZDyIBh2KGE0cRr+cjkPxDyeqfGXQ7VUjp13CBriCkER8SOmBdw=
 =QJEy
 -----END PGP SIGNATURE-----

Merge tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "This is the first batch of fixes that usually arrive during the merge
  window code freeze. Regressions and stable material.

  Regressions:

   - fix deadlock in log sync in zoned mode

   - fix bugs in subpage mode still wrongly assuming sectorsize == page
     size

  Fixes:

   - fix missing kunmap of the Q stripe in RAID6

   - block group fixes:
      - fix race between extent freeing/allocation when using bitmaps
      - avoid double put of block group when emptying cluster

   - swapfile fixes:
      - fix swapfile writes vs running scrub
      - fix swapfile activation vs snapshot creation

   - fix stale data exposure after cloning a hole with NO_HOLES enabled

   - remove tree-checker check that does not work in case information
     from other leaves is necessary"

* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix deadlock on log sync
  btrfs: avoid double put of block group when emptying cluster
  btrfs: fix stale data exposure after cloning a hole with NO_HOLES enabled
  btrfs: tree-checker: do not error out if extent ref hash doesn't match
  btrfs: fix race between swap file activation and snapshot creation
  btrfs: fix race between writes to swap files and scrub
  btrfs: avoid checking for RO block group twice during nocow writeback
  btrfs: fix race between extent freeing/allocation when using bitmaps
  btrfs: make check_compressed_csum() to be subpage compatible
  btrfs: make btrfs_submit_compressed_read() subpage compatible
  btrfs: fix raid6 qstripe kmap
 2021-03-01 11:17:37 -08:00
Linus Torvalds
7d6beb71da idmapped-mounts-v5.12 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
 ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
 4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
 =yPaw
 -----END PGP SIGNATURE-----

Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull idmapped mounts from Christian Brauner:
 "This introduces idmapped mounts which has been in the making for some
  time. Simply put, different mounts can expose the same file or
  directory with different ownership. This initial implementation comes
  with ports for fat, ext4 and with Christoph's port for xfs with more
  filesystems being actively worked on by independent people and
  maintainers.

  Idmapping mounts handle a wide range of long standing use-cases. Here
  are just a few:

   - Idmapped mounts make it possible to easily share files between
     multiple users or multiple machines especially in complex
     scenarios. For example, idmapped mounts will be used in the
     implementation of portable home directories in
     systemd-homed.service(8) where they allow users to move their home
     directory to an external storage device and use it on multiple
     computers where they are assigned different uids and gids. This
     effectively makes it possible to assign random uids and gids at
     login time.

   - It is possible to share files from the host with unprivileged
     containers without having to change ownership permanently through
     chown(2).

   - It is possible to idmap a container's rootfs and without having to
     mangle every file. For example, Chromebooks use it to share the
     user's Download folder with their unprivileged containers in their
     Linux subsystem.

   - It is possible to share files between containers with
     non-overlapping idmappings.

   - Filesystem that lack a proper concept of ownership such as fat can
     use idmapped mounts to implement discretionary access (DAC)
     permission checking.

   - They allow users to efficiently changing ownership on a per-mount
     basis without having to (recursively) chown(2) all files. In
     contrast to chown (2) changing ownership of large sets of files is
     instantenous with idmapped mounts. This is especially useful when
     ownership of a whole root filesystem of a virtual machine or
     container is changed. With idmapped mounts a single syscall
     mount_setattr syscall will be sufficient to change the ownership of
     all files.

   - Idmapped mounts always take the current ownership into account as
     idmappings specify what a given uid or gid is supposed to be mapped
     to. This contrasts with the chown(2) syscall which cannot by itself
     take the current ownership of the files it changes into account. It
     simply changes the ownership to the specified uid and gid. This is
     especially problematic when recursively chown(2)ing a large set of
     files which is commong with the aforementioned portable home
     directory and container and vm scenario.

   - Idmapped mounts allow to change ownership locally, restricting it
     to specific mounts, and temporarily as the ownership changes only
     apply as long as the mount exists.

  Several userspace projects have either already put up patches and
  pull-requests for this feature or will do so should you decide to pull
  this:

   - systemd: In a wide variety of scenarios but especially right away
     in their implementation of portable home directories.

         https://systemd.io/HOME_DIRECTORY/

   - container runtimes: containerd, runC, LXD:To share data between
     host and unprivileged containers, unprivileged and privileged
     containers, etc. The pull request for idmapped mounts support in
     containerd, the default Kubernetes runtime is already up for quite
     a while now: https://github.com/containerd/containerd/pull/4734

   - The virtio-fs developers and several users have expressed interest
     in using this feature with virtual machines once virtio-fs is
     ported.

   - ChromeOS: Sharing host-directories with unprivileged containers.

  I've tightly synced with all those projects and all of those listed
  here have also expressed their need/desire for this feature on the
  mailing list. For more info on how people use this there's a bunch of
  talks about this too. Here's just two recent ones:

      https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
      https://fosdem.org/2021/schedule/event/containers_idmap/

  This comes with an extensive xfstests suite covering both ext4 and
  xfs:

      https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts

  It covers truncation, creation, opening, xattrs, vfscaps, setid
  execution, setgid inheritance and more both with idmapped and
  non-idmapped mounts. It already helped to discover an unrelated xfs
  setgid inheritance bug which has since been fixed in mainline. It will
  be sent for inclusion with the xfstests project should you decide to
  merge this.

  In order to support per-mount idmappings vfsmounts are marked with
  user namespaces. The idmapping of the user namespace will be used to
  map the ids of vfs objects when they are accessed through that mount.
  By default all vfsmounts are marked with the initial user namespace.
  The initial user namespace is used to indicate that a mount is not
  idmapped. All operations behave as before and this is verified in the
  testsuite.

  Based on prior discussions we want to attach the whole user namespace
  and not just a dedicated idmapping struct. This allows us to reuse all
  the helpers that already exist for dealing with idmappings instead of
  introducing a whole new range of helpers. In addition, if we decide in
  the future that we are confident enough to enable unprivileged users
  to setup idmapped mounts the permission checking can take into account
  whether the caller is privileged in the user namespace the mount is
  currently marked with.

  The user namespace the mount will be marked with can be specified by
  passing a file descriptor refering to the user namespace as an
  argument to the new mount_setattr() syscall together with the new
  MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
  of extensibility.

  The following conditions must be met in order to create an idmapped
  mount:

   - The caller must currently have the CAP_SYS_ADMIN capability in the
     user namespace the underlying filesystem has been mounted in.

   - The underlying filesystem must support idmapped mounts.

   - The mount must not already be idmapped. This also implies that the
     idmapping of a mount cannot be altered once it has been idmapped.

   - The mount must be a detached/anonymous mount, i.e. it must have
     been created by calling open_tree() with the OPEN_TREE_CLONE flag
     and it must not already have been visible in the filesystem.

  The last two points guarantee easier semantics for userspace and the
  kernel and make the implementation significantly simpler.

  By default vfsmounts are marked with the initial user namespace and no
  behavioral or performance changes are observed.

  The manpage with a detailed description can be found here:

      1d7b902e28

  In order to support idmapped mounts, filesystems need to be changed
  and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
  patches to convert individual filesystem are not very large or
  complicated overall as can be seen from the included fat, ext4, and
  xfs ports. Patches for other filesystems are actively worked on and
  will be sent out separately. The xfstestsuite can be used to verify
  that port has been done correctly.

  The mount_setattr() syscall is motivated independent of the idmapped
  mounts patches and it's been around since July 2019. One of the most
  valuable features of the new mount api is the ability to perform
  mounts based on file descriptors only.

  Together with the lookup restrictions available in the openat2()
  RESOLVE_* flag namespace which we added in v5.6 this is the first time
  we are close to hardened and race-free (e.g. symlinks) mounting and
  path resolution.

  While userspace has started porting to the new mount api to mount
  proper filesystems and create new bind-mounts it is currently not
  possible to change mount options of an already existing bind mount in
  the new mount api since the mount_setattr() syscall is missing.

  With the addition of the mount_setattr() syscall we remove this last
  restriction and userspace can now fully port to the new mount api,
  covering every use-case the old mount api could. We also add the
  crucial ability to recursively change mount options for a whole mount
  tree, both removing and adding mount options at the same time. This
  syscall has been requested multiple times by various people and
  projects.

  There is a simple tool available at

      https://github.com/brauner/mount-idmapped

  that allows to create idmapped mounts so people can play with this
  patch series. I'll add support for the regular mount binary should you
  decide to pull this in the following weeks:

  Here's an example to a simple idmapped mount of another user's home
  directory:

	u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt

	u1001@f2-vm:/$ ls -al /home/ubuntu/
	total 28
	drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
	drwxr-xr-x 4 root   root   4096 Oct 28 04:00 ..
	-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
	-rw-r--r-- 1 ubuntu ubuntu  220 Feb 25  2020 .bash_logout
	-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25  2020 .bashrc
	-rw-r--r-- 1 ubuntu ubuntu  807 Feb 25  2020 .profile
	-rw-r--r-- 1 ubuntu ubuntu    0 Oct 16 16:11 .sudo_as_admin_successful
	-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo

	u1001@f2-vm:/$ ls -al /mnt/
	total 28
	drwxr-xr-x  2 u1001 u1001 4096 Oct 28 22:07 .
	drwxr-xr-x 29 root  root  4096 Oct 28 22:01 ..
	-rw-------  1 u1001 u1001 3154 Oct 28 22:12 .bash_history
	-rw-r--r--  1 u1001 u1001  220 Feb 25  2020 .bash_logout
	-rw-r--r--  1 u1001 u1001 3771 Feb 25  2020 .bashrc
	-rw-r--r--  1 u1001 u1001  807 Feb 25  2020 .profile
	-rw-r--r--  1 u1001 u1001    0 Oct 16 16:11 .sudo_as_admin_successful
	-rw-------  1 u1001 u1001 1144 Oct 28 00:43 .viminfo

	u1001@f2-vm:/$ touch /mnt/my-file

	u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file

	u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file

	u1001@f2-vm:/$ ls -al /mnt/my-file
	-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file

	u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
	-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file

	u1001@f2-vm:/$ getfacl /mnt/my-file
	getfacl: Removing leading '/' from absolute path names
	# file: mnt/my-file
	# owner: u1001
	# group: u1001
	user::rw-
	user:u1001:rwx
	group::rw-
	mask::rwx
	other::r--

	u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
	getfacl: Removing leading '/' from absolute path names
	# file: home/ubuntu/my-file
	# owner: ubuntu
	# group: ubuntu
	user::rw-
	user:ubuntu:rwx
	group::rw-
	mask::rwx
	other::r--"

* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
  xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
  xfs: support idmapped mounts
  ext4: support idmapped mounts
  fat: handle idmapped mounts
  tests: add mount_setattr() selftests
  fs: introduce MOUNT_ATTR_IDMAP
  fs: add mount_setattr()
  fs: add attr_flags_to_mnt_flags helper
  fs: split out functions to hold writers
  namespace: only take read lock in do_reconfigure_mnt()
  mount: make {lock,unlock}_mount_hash() static
  namespace: take lock_mount_hash() directly when changing flags
  nfs: do not export idmapped mounts
  overlayfs: do not mount on top of idmapped mounts
  ecryptfs: do not mount on top of idmapped mounts
  ima: handle idmapped mounts
  apparmor: handle idmapped mounts
  fs: make helpers idmap mount aware
  exec: handle idmapped mounts
  would_dump: handle idmapped mounts
  ...
 2021-02-23 13:39:45 -08:00
Filipe Manana
195a49eaf6 btrfs: fix race between writes to swap files and scrub 
When we active a swap file, at btrfs_swap_activate(), we acquire the
exclusive operation lock to prevent the physical location of the swap
file extents to be changed by operations such as balance and device
replace/resize/remove. We also call there can_nocow_extent() which,
among other things, checks if the block group of a swap file extent is
currently RO, and if it is we can not use the extent, since a write
into it would result in COWing the extent.

However we have no protection against a scrub operation running after we
activate the swap file, which can result in the swap file extents to be
COWed while the scrub is running and operating on the respective block
group, because scrub turns a block group into RO before it processes it
and then back again to RW mode after processing it. That means an attempt
to write into a swap file extent while scrub is processing the respective
block group, will result in COWing the extent, changing its physical
location on disk.

Fix this by making sure that block groups that have extents that are used
by active swap files can not be turned into RO mode, therefore making it
not possible for a scrub to turn them into RO mode. When a scrub finds a
block group that can not be turned to RO due to the existence of extents
used by swap files, it proceeds to the next block group and logs a warning
message that mentions the block group was skipped due to active swap
files - this is the same approach we currently use for balance.

Fixes: ed46ff3d42 ("Btrfs: support swap files")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-22 18:07:15 +01:00
Naohiro Aota
9d294a685f btrfs: zoned: enable to mount ZONED incompat flag 
This final patch adds the ZONED incompat flag to the supported flags
and enables to mount ZONED flagged file system.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-09 02:52:24 +01:00
Naohiro Aota
40ab3be102 btrfs: zoned: extend zoned allocator to use dedicated tree-log block group 
This is the 1/3 patch to enable tree log on zoned filesystems.

The tree-log feature does not work on a zoned filesystem as is. Blocks for
a tree-log tree are allocated mixed with other metadata blocks and btrfs
writes and syncs the tree-log blocks to devices at the time of fsync(),
which has a different timing than a global transaction commit. As a
result, both writing tree-log blocks and writing other metadata blocks
become non-sequential writes that zoned filesystems must avoid.

Introduce a dedicated block group for tree-log blocks, so that tree-log
blocks and other metadata blocks can be separate write streams.  As a
result, each write stream can now be written to devices separately.
"fs_info->treelog_bg" tracks the dedicated block group and assigns
"treelog_bg" on-demand on tree-log block allocation time.

This commit extends the zoned block allocator to use the block group.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-09 02:46:08 +01:00
Naohiro Aota
0bc09ca129 btrfs: zoned: serialize metadata IO 
We cannot use zone append for writing metadata, because the B-tree nodes
have references to each other using logical address. Without knowing
the address in advance, we cannot construct the tree in the first place.
So we need to serialize write IOs for metadata.

We cannot add a mutex around allocation and submission because metadata
blocks are allocated in an earlier stage to build up B-trees.

Add a zoned_meta_io_lock and hold it during metadata IO submission in
btree_write_cache_pages() to serialize IOs.

Furthermore, this adds a per-block group metadata IO submission pointer
"meta_write_pointer" to ensure sequential writing, which can break when
attempting to write back blocks in an unfinished transaction. If the
writing out failed because of a hole and the write out is for data
integrity (WB_SYNC_ALL), it returns EAGAIN.

A caller like fsync() code should handle this properly e.g. by falling
back to a full transaction commit.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-09 02:46:07 +01:00
Johannes Thumshirn
cacb2cea46 btrfs: zoned: check if bio spans across an ordered extent 
To ensure that an ordered extent maps to a contiguous region on disk, we
need to maintain a "one bio == one ordered extent" rule.

Ensure that constructing bio does not span more than an ordered extent.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-09 02:46:05 +01:00
Josef Bacik
576fa34830 btrfs: improve preemptive background space flushing 
Currently if we ever have to flush space because we do not have enough
we allocate a ticket and attach it to the space_info, and then
systematically flush things in the filesystem that hold space
reservations until our space is reclaimed.

However this has a latency cost, we must go to sleep and wait for the
flushing to make progress before we are woken up and allowed to continue
doing our work.

In order to address that we used to kick off the async worker to flush
space preemptively, so that we could be reclaiming space hopefully
before any tasks needed to stop and wait for space to reclaim.

When I introduced the ticketed ENOSPC stuff this broke slightly in the
fact that we were using tickets to indicate if we were done flushing.
No tickets, no more flushing.  However this meant that we essentially
never preemptively flushed.  This caused a write performance regression
that Nikolay noticed in an unrelated patch that removed the committing
of the transaction during btrfs_end_transaction.

The behavior that happened pre that patch was btrfs_end_transaction()
would see that we were low on space, and it would commit the
transaction.  This was bad because in this particular case you could end
up with thousands and thousands of transactions being committed during
the 5 minute reproducer.  With the patch to remove this behavior we got
much more sane transaction commits, but we ended up slower because we
would write for a while, flush, write for a while, flush again.

To address this we need to reinstate a preemptive flushing mechanism.
However it is distinctly different from our ticketing flushing in that
it doesn't have tickets to base it's decisions on.  Instead of bolting
this logic into our existing flushing work, add another worker to handle
this preemptive flushing.  Here we will attempt to be slightly
intelligent about the things that we flushing, attempting to balance
between whichever pool is taking up the most space.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-08 22:58:58 +01:00
Josef Bacik
f00c42dd4c btrfs: introduce a FORCE_COMMIT_TRANS flush operation 
Solely for preemptive flushing, we want to be able to force the
transaction commit without any of the ambiguity of
may_commit_transaction().  This is because may_commit_transaction()
checks tickets and such, and in preemptive flushing we already know
it'll be helpful, so use this to keep the code nice and clean and
straightforward.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-08 22:58:58 +01:00
Josef Bacik
5deb17e18e btrfs: track ordered bytes instead of just dio ordered bytes 
We track dio_bytes because the shrink delalloc code needs to know if we
have more DIO in flight than we have normal buffered IO.  The reason for
this is because we can't "flush" DIO, we have to just wait on the
ordered extents to finish.

However this is true of all ordered extents.  If we have more ordered
space outstanding than dirty pages we should be waiting on ordered
extents.  We already are ok on this front technically, because we always
do a FLUSH_DELALLOC_WAIT loop, but I want to use the ordered counter in
the preemptive flushing code as well, so change this to count all
ordered bytes instead of just DIO ordered bytes.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-08 22:58:58 +01:00
Nikolay Borisov
9db4dc241e btrfs: make btrfs_start_delalloc_root's nr argument a long 
It's currently u64 which gets instantly translated either to LONG_MAX
(if U64_MAX is passed) or cast to an unsigned long (which is in fact,
wrong because writeback_control::nr_to_write is a signed, long type).

Just convert the function's argument to be long time which obviates the
need to manually convert u64 value to a long. Adjust all call sites
which pass U64_MAX to pass LONG_MAX. Finally ensure that in
shrink_delalloc the u64 is converted to a long without overflowing,
resulting in a negative number.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-08 22:58:51 +01:00
Nikolay Borisov
69948022c9 btrfs: remove new_dirid argument from btrfs_create_subvol_root 
It's no longer used. While at it also remove new_dirid in create_subvol
as it's used in a single place and open code it. No functional changes.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-08 22:58:50 +01:00
Nikolay Borisov
6b8fad576a btrfs: rename btrfs_root::highest_objectid to free_objectid 
This reflects the true purpose of the member as it's being used solely
in context where a new objectid is being allocated. Future changes will
also change the way it's being used to closely follow this semantics.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-02-08 22:58:49 +01:00
Linus Torvalds
c05d51c773 for-5.11-rc5-tag 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmAUIkAACgkQxWXV+ddt
 WDsWVg/+IIEk9H1v9q9ShvVmPvmnlT8/0ywj1hdwFMBkFBjIeU8tBz9ZMGPXCzrF
 XemmWKChVOnR3SIq/bMrwuRC/Gv/pBvwVshXLP51YJHv7lSGX0Ayrb27BFQcVaC/
 3QhpE7veEiqxwLyMj+LWG4hE2X+oqiqzrXCpeC5un4zEluT45RSKooqueQ4jM8aw
 DrKLQA57a1YEIqrE2KQzy5A6BnSNyxPXEEX34kbugmmen46Fh77hrwme1K9vQn1t
 v3/V4LcarXADxxokAxU2Igb/vK0+BN33NOYsBwLWWD4kUaTGS4KczsDOowkRRTMH
 /qiQUdca0X7ElR+VFl8rgB8PxuJcZ87aCdsMkErUA4sjxyp11VDIeEgirPNAcXtR
 b+1LIkn3k3l8JzkKyXwDuZuNBsh0idTY24IE+QDBMIGq+jE1N6N3t5gEwa2NeaiP
 9O5QnS5XAJCo8a9+gp1aF5z94vwQwvf9TA80nGrnpxGmXEEEZ9PgXsc4JON1Blhn
 NtJDwBPzEjHCEYdE73/lRMsLmYeGhpRugKb+lQ+OTo2iZzxH2SjWn9vXKiN7vAp2
 zysjzdPfkY5BLggH5cPg0fuRaf/Is00EeVqn3eA7QsFKDhrpoPFBO+aV5xeshsaz
 8fjt7kkXFb+Vyy4SDvmPioJQ7/MFZ5Czn+BL1JwO4l/vYcEMUzM=
 =/yHv
 -----END PGP SIGNATURE-----

Merge tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more fixes for a late rc:

   - fix lockdep complaint on 32bit arches and also remove an unsafe
     memory use due to device vs filesystem lifetime

   - two fixes for free space tree:

      * race during log replay and cache rebuild, now more likely to
        happen due to changes in this dev cycle

      * possible free space tree corruption with online conversion
        during initial tree population"

* tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix log replay failure due to race with space cache rebuild
  btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
  btrfs: fix possible free space tree corruption with online conversion
 2021-01-29 13:54:40 -08:00
Josef Bacik
2f96e40212 btrfs: fix possible free space tree corruption with online conversion 
While running btrfs/011 in a loop I would often ASSERT() while trying to
add a new free space entry that already existed, or get an EEXIST while
adding a new block to the extent tree, which is another indication of
double allocation.

This occurs because when we do the free space tree population, we create
the new root and then populate the tree and commit the transaction.
The problem is when you create a new root, the root node and commit root
node are the same.  During this initial transaction commit we will run
all of the delayed refs that were paused during the free space tree
generation, and thus begin to cache block groups.  While caching block
groups the caching thread will be reading from the main root for the
free space tree, so as we make allocations we'll be changing the free
space tree, which can cause us to add the same range twice which results
in either the ASSERT(ret != -EEXIST); in __btrfs_add_free_space, or in a
variety of different errors when running delayed refs because of a
double allocation.

Fix this by marking the fs_info as unsafe to load the free space tree,
and fall back on the old slow method.  We could be smarter than this,
for example caching the block group while we're populating the free
space tree, but since this is a serious problem I've opted for the
simplest solution.

CC: stable@vger.kernel.org # 4.9+
Fixes: a5ed918285 ("Btrfs: implement the free space B-tree")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2021-01-25 18:44:37 +01:00
Christian Brauner
549c729771
fs: make helpers idmap mount aware 
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.

As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.

Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
 2021-01-24 14:27:20 +01:00
Linus Torvalds
71c061d244 for-5.11-rc2-tag 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl/0cI8ACgkQxWXV+ddt
 WDspQw/8DcC8zhGgunk0m2kcXd6dFOGbsr3hNGCsgUSKESRw6AgTZ0rJf/QLjayF
 /vaJWzQW9ijfZ92fWZS+mrmskk0N8RFOsEvkCRLesgRaasbrkchLBo5HGQasOBEV
 LXyU878GrBkNaHzClJz+JdU26i0d17BFdddgtZVQ1St9Wd9ecc7Q6iqG80RWFeE7
 uVbhv+QjocM3EieOnwIy5Mz6jZgJLYwqw7/y2njKduBeJtbt1K1j/y7IJk0WFMUM
 8eUpDL6vlAHB8FjV2wWOzO46bbEaUpaBADM6yabrq0lnM0kr7Rb+WV/WSLM/AZ3g
 Hzs4qROOEP+zjfZ5nYjJQDJRMpSipZomsUY5uMZnhRxlZuHPaoBotRRzs5AIZYj2
 BnkfucOcjxS/JTBD//ltJXE8RxbMIyMBBBipbBwqmxOkR9gM9BPuJ6iJPfUX//gG
 1GHJ+FPns8ua3JW21ih6H31xNEPS36tsywvE8yCEtEWMxCFCBwgGu+4D8KpGBjtY
 ySFxkxxAbTuFi9fqSE/mBC+6lpbVTO0OvizuoEQh8C2izkXRbDsDVgPN8d7rCW7h
 Cdox4DUp61sNf+G3ll9Dv9ceAXroZTVRTHGjlav6NAFpydz3yPo5x54Ex7S+k3oN
 BAcZEl1Tl3hz4WxF8Ywc+yJ8n8l9AVa3KcYRXVbyVjTGg+JjU94=
 =jlQf
 -----END PGP SIGNATURE-----

Merge tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more fixes that arrived before the end of the year:

   - a bunch of fixes related to transaction handle lifetime wrt various
     operations (umount, remount, qgroup scan, orphan cleanup)

   - async discard scheduling fixes

   - fix item size calculation when item keys collide for extend refs
     (hardlinks)

   - fix qgroup flushing from running transaction

   - fix send, wrong file path when there is an inode with a pending
     rmdir

   - fix deadlock when cloning inline extent and low on free metadata
     space"

* tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: run delayed iputs when remounting RO to avoid leaking them
  btrfs: add assertion for empty list of transactions at late stage of umount
  btrfs: fix race between RO remount and the cleaner task
  btrfs: fix transaction leak and crash after cleaning up orphans on RO mount
  btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan
  btrfs: merge critical sections of discard lock in workfn
  btrfs: fix racy access to discard_ctl data
  btrfs: fix async discard stall
  btrfs: tests: initialize test inodes location
  btrfs: send: fix wrong file path when there is an inode with a pending rmdir
  btrfs: qgroup: don't try to wait flushing if we're already holding a transaction
  btrfs: correctly calculate item size used when item key collision happens
  btrfs: fix deadlock when cloning inline extent and low on free metadata space
 2021-01-06 11:19:08 -08:00
Filipe Manana
a0a1db70df btrfs: fix race between RO remount and the cleaner task 
When we are remounting a filesystem in RO mode we can race with the cleaner
task and result in leaking a transaction if the filesystem is unmounted
shortly after, before the transaction kthread had a chance to commit that
transaction. That also results in a crash during unmount, due to a
use-after-free, if hardware acceleration is not available for crc32c.

The following sequence of steps explains how the race happens.

1) The filesystem is mounted in RW mode and the cleaner task is running.
   This means that currently BTRFS_FS_CLEANER_RUNNING is set at
   fs_info->flags;

2) The cleaner task is currently running delayed iputs for example;

3) A filesystem RO remount operation starts;

4) The RO remount task calls btrfs_commit_super(), which commits any
   currently open transaction, and it finishes;

5) At this point the cleaner task is still running and it creates a new
   transaction by doing one of the following things:

   * When running the delayed iput() for an inode with a 0 link count,
     in which case at btrfs_evict_inode() we start a transaction through
     the call to evict_refill_and_join(), use it and then release its
     handle through btrfs_end_transaction();

   * When deleting a dead root through btrfs_clean_one_deleted_snapshot(),
     a transaction is started at btrfs_drop_snapshot() and then its handle
     is released through a call to btrfs_end_transaction_throttle();

   * When the remount task was still running, and before the remount task
     called btrfs_delete_unused_bgs(), the cleaner task also called
     btrfs_delete_unused_bgs() and it picked and removed one block group
     from the list of unused block groups. Before the cleaner task started
     a transaction, through btrfs_start_trans_remove_block_group() at
     btrfs_delete_unused_bgs(), the remount task had already called
     btrfs_commit_super();

6) So at this point the filesystem is in RO mode and we have an open
   transaction that was started by the cleaner task;

7) Shortly after a filesystem unmount operation starts. At close_ctree()
   we stop the transaction kthread before it had a chance to commit the
   transaction, since less than 30 seconds (the default commit interval)
   have elapsed since the last transaction was committed;

8) We end up calling iput() against the btree inode at close_ctree() while
   there is an open transaction, and since that transaction was used to
   update btrees by the cleaner, we have dirty pages in the btree inode
   due to COW operations on metadata extents, and therefore writeback is
   triggered for the btree inode.

   So btree_write_cache_pages() is invoked to flush those dirty pages
   during the final iput() on the btree inode. This results in creating a
   bio and submitting it, which makes us end up at
   btrfs_submit_metadata_bio();

9) At btrfs_submit_metadata_bio() we end up at the if-then-else branch
   that calls btrfs_wq_submit_bio(), because check_async_write() returned
   a value of 1. This value of 1 is because we did not have hardware
   acceleration available for crc32c, so BTRFS_FS_CSUM_IMPL_FAST was not
   set in fs_info->flags;

10) Then at btrfs_wq_submit_bio() we call btrfs_queue_work() against the
    workqueue at fs_info->workers, which was already freed before by the
    call to btrfs_stop_all_workers() at close_ctree(). This results in an
    invalid memory access due to a use-after-free, leading to a crash.

When this happens, before the crash there are several warnings triggered,
since we have reserved metadata space in a block group, the delayed refs
reservation, etc:

  ------------[ cut here ]------------
  WARNING: CPU: 4 PID: 1729896 at fs/btrfs/block-group.c:125 btrfs_put_block_group+0x63/0xa0 [btrfs]
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  CPU: 4 PID: 1729896 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_put_block_group+0x63/0xa0 [btrfs]
  Code: f0 01 00 00 48 39 c2 75 (...)
  RSP: 0018:ffffb270826bbdd8 EFLAGS: 00010206
  RAX: 0000000000000001 RBX: ffff947ed73e4000 RCX: ffff947ebc8b29c8
  RDX: 0000000000000001 RSI: ffffffffc0b150a0 RDI: ffff947ebc8b2800
  RBP: ffff947ebc8b2800 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ed73e4110
  R13: ffff947ed73e4160 R14: ffff947ebc8b2988 R15: dead000000000100
  FS:  00007f15edfea840(0000) GS:ffff9481ad600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f37e2893320 CR3: 0000000138f68001 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_free_block_groups+0x17f/0x2f0 [btrfs]
   close_ctree+0x2ba/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15ee221ee7
  Code: ff 0b 00 f7 d8 64 89 01 48 (...)
  RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000
  RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0
  R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last  enabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace dd74718fef1ed5c6 ]---
  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 1729896 at fs/btrfs/block-rsv.c:459 btrfs_release_global_block_rsv+0x70/0xc0 [btrfs]
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  CPU: 2 PID: 1729896 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_release_global_block_rsv+0x70/0xc0 [btrfs]
  Code: 48 83 bb b0 03 00 00 00 (...)
  RSP: 0018:ffffb270826bbdd8 EFLAGS: 00010206
  RAX: 000000000033c000 RBX: ffff947ed73e4000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffffffffc0b0d8c1 RDI: 00000000ffffffff
  RBP: ffff947ebc8b7000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ed73e4110
  R13: ffff947ed73e5278 R14: dead000000000122 R15: dead000000000100
  FS:  00007f15edfea840(0000) GS:ffff9481aca00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000561a79f76e20 CR3: 0000000138f68006 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_free_block_groups+0x24c/0x2f0 [btrfs]
   close_ctree+0x2ba/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15ee221ee7
  Code: ff 0b 00 f7 d8 64 89 01 (...)
  RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000
  RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0
  R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last  enabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace dd74718fef1ed5c7 ]---
  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 1729896 at fs/btrfs/block-group.c:3377 btrfs_free_block_groups+0x25d/0x2f0 [btrfs]
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  CPU: 5 PID: 1729896 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_free_block_groups+0x25d/0x2f0 [btrfs]
  Code: ad de 49 be 22 01 00 (...)
  RSP: 0018:ffffb270826bbde8 EFLAGS: 00010206
  RAX: ffff947ebeae1d08 RBX: ffff947ed73e4000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffff947e9d823ae8 RDI: 0000000000000246
  RBP: ffff947ebeae1d08 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ebeae1c00
  R13: ffff947ed73e5278 R14: dead000000000122 R15: dead000000000100
  FS:  00007f15edfea840(0000) GS:ffff9481ad200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f1475d98ea8 CR3: 0000000138f68005 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   close_ctree+0x2ba/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15ee221ee7
  Code: ff 0b 00 f7 d8 64 89 (...)
  RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000
  RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0
  R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last  enabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace dd74718fef1ed5c8 ]---
  BTRFS info (device sdc): space_info 4 has 268238848 free, is not full
  BTRFS info (device sdc): space_info total=268435456, used=114688, pinned=0, reserved=16384, may_use=0, readonly=65536
  BTRFS info (device sdc): global_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): trans_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): chunk_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): delayed_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): delayed_refs_rsv: size 524288 reserved 0

And the crash, which only happens when we do not have crc32c hardware
acceleration, produces the following trace immediately after those
warnings:

  stack segment: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
  CPU: 2 PID: 1749129 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_queue_work+0x36/0x190 [btrfs]
  Code: 54 55 53 48 89 f3 (...)
  RSP: 0018:ffffb27082443ae8 EFLAGS: 00010282
  RAX: 0000000000000004 RBX: ffff94810ee9ad90 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffff94810ee9ad90 RDI: ffff947ed8ee75a0
  RBP: a56b6b6b6b6b6b6b R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000007 R11: 0000000000000001 R12: ffff947fa9b435a8
  R13: ffff94810ee9ad90 R14: 0000000000000000 R15: ffff947e93dc0000
  FS:  00007f3cfe974840(0000) GS:ffff9481ac600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f1b42995a70 CR3: 0000000127638003 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_wq_submit_bio+0xb3/0xd0 [btrfs]
   btrfs_submit_metadata_bio+0x44/0xc0 [btrfs]
   submit_one_bio+0x61/0x70 [btrfs]
   btree_write_cache_pages+0x414/0x450 [btrfs]
   ? kobject_put+0x9a/0x1d0
   ? trace_hardirqs_on+0x1b/0xf0
   ? _raw_spin_unlock_irqrestore+0x3c/0x60
   ? free_debug_processing+0x1e1/0x2b0
   do_writepages+0x43/0xe0
   ? lock_acquired+0x199/0x490
   __writeback_single_inode+0x59/0x650
   writeback_single_inode+0xaf/0x120
   write_inode_now+0x94/0xd0
   iput+0x187/0x2b0
   close_ctree+0x2c6/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f3cfebabee7
  Code: ff 0b 00 f7 d8 64 89 01 (...)
  RSP: 002b:00007ffc9c9a05f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f3cfecd1264 RCX: 00007f3cfebabee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 0000562b6b478000
  RBP: 0000562b6b473a30 R08: 0000000000000000 R09: 00007f3cfec6cbe0
  R10: 0000562b6b479fe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 0000562b6b478000 R14: 0000562b6b473b40 R15: 0000562b6b473c60
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  ---[ end trace dd74718fef1ed5cc ]---

Finally when we remove the btrfs module (rmmod btrfs), there are several
warnings about objects that were allocated from our slabs but were never
freed, consequence of the transaction that was never committed and got
leaked:

  =============================================================================
  BUG btrfs_delayed_ref_head (Tainted: G    B   W        ): Objects remaining in btrfs_delayed_ref_head on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------

  INFO: Slab 0x0000000094c2ae56 objects=24 used=2 fp=0x000000002bfa2521 flags=0x17fffc000010200
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   slab_err+0xb7/0xdc
   ? lock_acquired+0x199/0x490
   __kmem_cache_shutdown+0x1ac/0x3c0
   ? lock_release+0x20e/0x4c0
   kmem_cache_destroy+0x55/0x120
   btrfs_delayed_ref_exit+0x11/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  INFO: Object 0x0000000050cbdd61 @offset=12104
  INFO: Allocated in btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] age=1894 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs]
        btrfs_free_tree_block+0x128/0x360 [btrfs]
        __btrfs_cow_block+0x489/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
        btrfs_mount+0x13b/0x3e0 [btrfs]
  INFO: Freed in __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] age=4292 cpu=2 pid=1729526
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        commit_cowonly_roots+0xfb/0x300 [btrfs]
        btrfs_commit_transaction+0x367/0xc40 [btrfs]
        sync_filesystem+0x74/0x90
        generic_shutdown_super+0x22/0x100
        kill_anon_super+0x14/0x30
        btrfs_kill_super+0x12/0x20 [btrfs]
        deactivate_locked_super+0x31/0x70
        cleanup_mnt+0x100/0x160
        task_work_run+0x68/0xb0
        exit_to_user_mode_prepare+0x1bb/0x1c0
        syscall_exit_to_user_mode+0x4b/0x260
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  INFO: Object 0x0000000086e9b0ff @offset=12776
  INFO: Allocated in btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] age=1900 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs]
        btrfs_alloc_tree_block+0x2bf/0x360 [btrfs]
        alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs]
        __btrfs_cow_block+0x12d/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
  INFO: Freed in __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] age=3141 cpu=6 pid=1729803
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        btrfs_write_dirty_block_groups+0x17d/0x3d0 [btrfs]
        commit_cowonly_roots+0x248/0x300 [btrfs]
        btrfs_commit_transaction+0x367/0xc40 [btrfs]
        close_ctree+0x113/0x2fa [btrfs]
        generic_shutdown_super+0x6c/0x100
        kill_anon_super+0x14/0x30
        btrfs_kill_super+0x12/0x20 [btrfs]
        deactivate_locked_super+0x31/0x70
        cleanup_mnt+0x100/0x160
        task_work_run+0x68/0xb0
        exit_to_user_mode_prepare+0x1bb/0x1c0
        syscall_exit_to_user_mode+0x4b/0x260
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  kmem_cache_destroy btrfs_delayed_ref_head: Slab cache still has objects
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   kmem_cache_destroy+0x119/0x120
   btrfs_delayed_ref_exit+0x11/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 0b (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  =============================================================================
  BUG btrfs_delayed_tree_ref (Tainted: G    B   W        ): Objects remaining in btrfs_delayed_tree_ref on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------

  INFO: Slab 0x0000000011f78dc0 objects=37 used=2 fp=0x0000000032d55d91 flags=0x17fffc000010200
  CPU: 3 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   slab_err+0xb7/0xdc
   ? lock_acquired+0x199/0x490
   __kmem_cache_shutdown+0x1ac/0x3c0
   ? lock_release+0x20e/0x4c0
   kmem_cache_destroy+0x55/0x120
   btrfs_delayed_ref_exit+0x1d/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  INFO: Object 0x000000001a340018 @offset=4408
  INFO: Allocated in btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] age=1917 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs]
        btrfs_free_tree_block+0x128/0x360 [btrfs]
        __btrfs_cow_block+0x489/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
        btrfs_mount+0x13b/0x3e0 [btrfs]
  INFO: Freed in __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] age=4167 cpu=4 pid=1729795
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        btrfs_commit_transaction+0x60/0xc40 [btrfs]
        create_subvol+0x56a/0x990 [btrfs]
        btrfs_mksubvol+0x3fb/0x4a0 [btrfs]
        __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs]
        btrfs_ioctl_snap_create+0x58/0x80 [btrfs]
        btrfs_ioctl+0x1a92/0x36f0 [btrfs]
        __x64_sys_ioctl+0x83/0xb0
        do_syscall_64+0x33/0x80
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  INFO: Object 0x000000002b46292a @offset=13648
  INFO: Allocated in btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] age=1923 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs]
        btrfs_alloc_tree_block+0x2bf/0x360 [btrfs]
        alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs]
        __btrfs_cow_block+0x12d/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
  INFO: Freed in __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] age=3164 cpu=6 pid=1729803
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        commit_cowonly_roots+0xfb/0x300 [btrfs]
        btrfs_commit_transaction+0x367/0xc40 [btrfs]
        close_ctree+0x113/0x2fa [btrfs]
        generic_shutdown_super+0x6c/0x100
        kill_anon_super+0x14/0x30
        btrfs_kill_super+0x12/0x20 [btrfs]
        deactivate_locked_super+0x31/0x70
        cleanup_mnt+0x100/0x160
        task_work_run+0x68/0xb0
        exit_to_user_mode_prepare+0x1bb/0x1c0
        syscall_exit_to_user_mode+0x4b/0x260
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  kmem_cache_destroy btrfs_delayed_tree_ref: Slab cache still has objects
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   kmem_cache_destroy+0x119/0x120
   btrfs_delayed_ref_exit+0x1d/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  =============================================================================
  BUG btrfs_delayed_extent_op (Tainted: G    B   W        ): Objects remaining in btrfs_delayed_extent_op on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------
  INFO: Slab 0x00000000f145ce2f objects=22 used=1 fp=0x00000000af0f92cf flags=0x17fffc000010200
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   slab_err+0xb7/0xdc
   ? lock_acquired+0x199/0x490
   __kmem_cache_shutdown+0x1ac/0x3c0
   ? __mutex_unlock_slowpath+0x45/0x2a0
   kmem_cache_destroy+0x55/0x120
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  INFO: Object 0x000000004cf95ea8 @offset=6264
  INFO: Allocated in btrfs_alloc_tree_block+0x1e0/0x360 [btrfs] age=1931 cpu=6 pid=1729873
        __slab_alloc.isra.0+0x109/0x1c0
        kmem_cache_alloc+0x7bb/0x830
        btrfs_alloc_tree_block+0x1e0/0x360 [btrfs]
        alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs]
        __btrfs_cow_block+0x12d/0x5f0 [btrfs]
        btrfs_cow_block+0xf7/0x220 [btrfs]
        btrfs_search_slot+0x62a/0xc40 [btrfs]
        btrfs_del_orphan_item+0x65/0xd0 [btrfs]
        btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
        open_ctree+0x125a/0x18a0 [btrfs]
        btrfs_mount_root.cold+0x13/0xed [btrfs]
        legacy_get_tree+0x30/0x60
        vfs_get_tree+0x28/0xe0
        fc_mount+0xe/0x40
        vfs_kern_mount.part.0+0x71/0x90
        btrfs_mount+0x13b/0x3e0 [btrfs]
  INFO: Freed in __btrfs_run_delayed_refs+0xabd/0x1290 [btrfs] age=3173 cpu=6 pid=1729803
        kmem_cache_free+0x34c/0x3c0
        __btrfs_run_delayed_refs+0xabd/0x1290 [btrfs]
        btrfs_run_delayed_refs+0x81/0x210 [btrfs]
        commit_cowonly_roots+0xfb/0x300 [btrfs]
        btrfs_commit_transaction+0x367/0xc40 [btrfs]
        close_ctree+0x113/0x2fa [btrfs]
        generic_shutdown_super+0x6c/0x100
        kill_anon_super+0x14/0x30
        btrfs_kill_super+0x12/0x20 [btrfs]
        deactivate_locked_super+0x31/0x70
        cleanup_mnt+0x100/0x160
        task_work_run+0x68/0xb0
        exit_to_user_mode_prepare+0x1bb/0x1c0
        syscall_exit_to_user_mode+0x4b/0x260
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
  kmem_cache_destroy btrfs_delayed_extent_op: Slab cache still has objects
  CPU: 3 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   kmem_cache_destroy+0x119/0x120
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  BTRFS: state leak: start 30408704 end 30425087 state 1 in tree 1 refs 1

So fix this by making the remount path to wait for the cleaner task before
calling btrfs_commit_super(). The remount path now waits for the bit
BTRFS_FS_CLEANER_RUNNING to be cleared from fs_info->flags before calling
btrfs_commit_super() and this ensures the cleaner can not start a
transaction after that, because it sleeps when the filesystem is in RO
mode and we have already flagged the filesystem as RO before waiting for
BTRFS_FS_CLEANER_RUNNING to be cleared.

This also introduces a new flag BTRFS_FS_STATE_RO to be used for
fs_info->fs_state when the filesystem is in RO mode. This is because we
were doing the RO check using the flags of the superblock and setting the
RO mode simply by ORing into the superblock's flags - those operations are
not atomic and could result in the cleaner not seeing the update from the
remount task after it clears BTRFS_FS_CLEANER_RUNNING.

Tested-by: Fabian Vogt <fvogt@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2020-12-18 15:00:02 +01:00
ethanwu
9a66497156 btrfs: correctly calculate item size used when item key collision happens 
Item key collision is allowed for some item types, like dir item and
inode refs, but the overall item size is limited by the nodesize.

item size(ins_len) passed from btrfs_insert_empty_items to
btrfs_search_slot already contains size of btrfs_item.

When btrfs_search_slot reaches leaf, we'll see if we need to split leaf.
The check incorrectly reports that split leaf is required, because
it treats the space required by the newly inserted item as
btrfs_item + item data. But in item key collision case, only item data
is actually needed, the newly inserted item could merge into the existing
one. No new btrfs_item will be inserted.

And split_leaf return EOVERFLOW from following code:

  if (extend && data_size + btrfs_item_size_nr(l, slot) +
      sizeof(struct btrfs_item) > BTRFS_LEAF_DATA_SIZE(fs_info))
      return -EOVERFLOW;

In most cases, when callers receive EOVERFLOW, they either return
this error or handle in different ways. For example, in normal dir item
creation the userspace will get errno EOVERFLOW; in inode ref case
INODE_EXTREF is used instead.

However, this is not the case for rename. To avoid the unrecoverable
situation in rename, btrfs_check_dir_item_collision is called in
early phase of rename. In this function, when item key collision is
detected leaf space is checked:

  data_size = sizeof(*di) + name_len;
  if (data_size + btrfs_item_size_nr(leaf, slot) +
      sizeof(struct btrfs_item) > BTRFS_LEAF_DATA_SIZE(root->fs_info))

the sizeof(struct btrfs_item) + btrfs_item_size_nr(leaf, slot) here
refers to existing item size, the condition here correctly calculates
the needed size for collision case rather than the wrong case above.

The consequence of inconsistent condition check between
btrfs_check_dir_item_collision and btrfs_search_slot when item key
collision happens is that we might pass check here but fail
later at btrfs_search_slot. Rename fails and volume is forced readonly

  [436149.586170] ------------[ cut here ]------------
  [436149.586173] BTRFS: Transaction aborted (error -75)
  [436149.586196] WARNING: CPU: 0 PID: 16733 at fs/btrfs/inode.c:9870 btrfs_rename2+0x1938/0x1b70 [btrfs]
  [436149.586227] CPU: 0 PID: 16733 Comm: python Tainted: G      D           4.18.0-rc5+ #1
  [436149.586228] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016
  [436149.586238] RIP: 0010:btrfs_rename2+0x1938/0x1b70 [btrfs]
  [436149.586254] RSP: 0018:ffffa327043a7ce0 EFLAGS: 00010286
  [436149.586255] RAX: 0000000000000000 RBX: ffff8d8a17d13340 RCX: 0000000000000006
  [436149.586256] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff8d8a7fc164b0
  [436149.586257] RBP: ffffa327043a7da0 R08: 0000000000000560 R09: 7265282064657472
  [436149.586258] R10: 0000000000000000 R11: 6361736e61725420 R12: ffff8d8a0d4c8b08
  [436149.586258] R13: ffff8d8a17d13340 R14: ffff8d8a33e0a540 R15: 00000000000001fe
  [436149.586260] FS:  00007fa313933740(0000) GS:ffff8d8a7fc00000(0000) knlGS:0000000000000000
  [436149.586261] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [436149.586262] CR2: 000055d8d9c9a720 CR3: 000000007aae0003 CR4: 00000000003606f0
  [436149.586295] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [436149.586296] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [436149.586296] Call Trace:
  [436149.586311]  vfs_rename+0x383/0x920
  [436149.586313]  ? vfs_rename+0x383/0x920
  [436149.586315]  do_renameat2+0x4ca/0x590
  [436149.586317]  __x64_sys_rename+0x20/0x30
  [436149.586324]  do_syscall_64+0x5a/0x120
  [436149.586330]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [436149.586332] RIP: 0033:0x7fa3133b1d37
  [436149.586348] RSP: 002b:00007fffd3e43908 EFLAGS: 00000246 ORIG_RAX: 0000000000000052
  [436149.586349] RAX: ffffffffffffffda RBX: 00007fa3133b1d30 RCX: 00007fa3133b1d37
  [436149.586350] RDX: 000055d8da06b5e0 RSI: 000055d8da225d60 RDI: 000055d8da2c4da0
  [436149.586351] RBP: 000055d8da2252f0 R08: 00007fa313782000 R09: 00000000000177e0
  [436149.586351] R10: 000055d8da010680 R11: 0000000000000246 R12: 00007fa313840b00

Thanks to Hans van Kranenburg for information about crc32 hash collision
tools, I was able to reproduce the dir item collision with following
python script.
https://github.com/wutzuchieh/misc_tools/blob/master/crc32_forge.py Run
it under a btrfs volume will trigger the abort transaction.  It simply
creates files and rename them to forged names that leads to
hash collision.

There are two ways to fix this. One is to simply revert the patch
878f2d2cb3 ("Btrfs: fix max dir item size calculation") to make the
condition consistent although that patch is correct about the size.

The other way is to handle the leaf space check correctly when
collision happens. I prefer the second one since it correct leaf
space check in collision case. This fix will not account
sizeof(struct btrfs_item) when the item already exists.
There are two places where ins_len doesn't contain
sizeof(struct btrfs_item), however.

  1. extent-tree.c: lookup_inline_extent_backref
  2. file-item.c: btrfs_csum_file_blocks

to make the logic of btrfs_search_slot more clear, we add a flag
search_for_extension in btrfs_path.

This flag indicates that ins_len passed to btrfs_search_slot doesn't
contain sizeof(struct btrfs_item). When key exists, btrfs_search_slot
will use the actual size needed to calculate the required leaf space.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: ethanwu <ethanwu@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2020-12-18 14:50:00 +01:00
Filipe Manana
3d45f221ce btrfs: fix deadlock when cloning inline extent and low on free metadata space 
When cloning an inline extent there are cases where we can not just copy
the inline extent from the source range to the target range (e.g. when the
target range starts at an offset greater than zero). In such cases we copy
the inline extent's data into a page of the destination inode and then
dirty that page. However, after that we will need to start a transaction
for each processed extent and, if we are ever low on available metadata
space, we may need to flush existing delalloc for all dirty inodes in an
attempt to release metadata space - if that happens we may deadlock:

* the async reclaim task queued a delalloc work to flush delalloc for
  the destination inode of the clone operation;

* the task executing that delalloc work gets blocked waiting for the
  range with the dirty page to be unlocked, which is currently locked
  by the task doing the clone operation;

* the async reclaim task blocks waiting for the delalloc work to complete;

* the cloning task is waiting on the waitqueue of its reservation ticket
  while holding the range with the dirty page locked in the inode's
  io_tree;

* if metadata space is not released by some other task (like delalloc for
  some other inode completing for example), the clone task waits forever
  and as a consequence the delalloc work and async reclaim tasks will hang
  forever as well. Releasing more space on the other hand may require
  starting a transaction, which will hang as well when trying to reserve
  metadata space, resulting in a deadlock between all these tasks.

When this happens, traces like the following show up in dmesg/syslog:

  [87452.323003] INFO: task kworker/u16:11:1810830 blocked for more than 120 seconds.
  [87452.323644]       Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  [87452.324248] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [87452.324852] task:kworker/u16:11  state:D stack:    0 pid:1810830 ppid:     2 flags:0x00004000
  [87452.325520] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
  [87452.326136] Call Trace:
  [87452.326737]  __schedule+0x5d1/0xcf0
  [87452.327390]  schedule+0x45/0xe0
  [87452.328174]  lock_extent_bits+0x1e6/0x2d0 [btrfs]
  [87452.328894]  ? finish_wait+0x90/0x90
  [87452.329474]  btrfs_invalidatepage+0x32c/0x390 [btrfs]
  [87452.330133]  ? __mod_memcg_state+0x8e/0x160
  [87452.330738]  __extent_writepage+0x2d4/0x400 [btrfs]
  [87452.331405]  extent_write_cache_pages+0x2b2/0x500 [btrfs]
  [87452.332007]  ? lock_release+0x20e/0x4c0
  [87452.332557]  ? trace_hardirqs_on+0x1b/0xf0
  [87452.333127]  extent_writepages+0x43/0x90 [btrfs]
  [87452.333653]  ? lock_acquire+0x1a3/0x490
  [87452.334177]  do_writepages+0x43/0xe0
  [87452.334699]  ? __filemap_fdatawrite_range+0xa4/0x100
  [87452.335720]  __filemap_fdatawrite_range+0xc5/0x100
  [87452.336500]  btrfs_run_delalloc_work+0x17/0x40 [btrfs]
  [87452.337216]  btrfs_work_helper+0xf1/0x600 [btrfs]
  [87452.337838]  process_one_work+0x24e/0x5e0
  [87452.338437]  worker_thread+0x50/0x3b0
  [87452.339137]  ? process_one_work+0x5e0/0x5e0
  [87452.339884]  kthread+0x153/0x170
  [87452.340507]  ? kthread_mod_delayed_work+0xc0/0xc0
  [87452.341153]  ret_from_fork+0x22/0x30
  [87452.341806] INFO: task kworker/u16:1:2426217 blocked for more than 120 seconds.
  [87452.342487]       Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  [87452.343274] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [87452.344049] task:kworker/u16:1   state:D stack:    0 pid:2426217 ppid:     2 flags:0x00004000
  [87452.344974] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
  [87452.345655] Call Trace:
  [87452.346305]  __schedule+0x5d1/0xcf0
  [87452.346947]  ? kvm_clock_read+0x14/0x30
  [87452.347676]  ? wait_for_completion+0x81/0x110
  [87452.348389]  schedule+0x45/0xe0
  [87452.349077]  schedule_timeout+0x30c/0x580
  [87452.349718]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [87452.350340]  ? lock_acquire+0x1a3/0x490
  [87452.351006]  ? try_to_wake_up+0x7a/0xa20
  [87452.351541]  ? lock_release+0x20e/0x4c0
  [87452.352040]  ? lock_acquired+0x199/0x490
  [87452.352517]  ? wait_for_completion+0x81/0x110
  [87452.353000]  wait_for_completion+0xab/0x110
  [87452.353490]  start_delalloc_inodes+0x2af/0x390 [btrfs]
  [87452.353973]  btrfs_start_delalloc_roots+0x12d/0x250 [btrfs]
  [87452.354455]  flush_space+0x24f/0x660 [btrfs]
  [87452.355063]  btrfs_async_reclaim_metadata_space+0x1bb/0x480 [btrfs]
  [87452.355565]  process_one_work+0x24e/0x5e0
  [87452.356024]  worker_thread+0x20f/0x3b0
  [87452.356487]  ? process_one_work+0x5e0/0x5e0
  [87452.356973]  kthread+0x153/0x170
  [87452.357434]  ? kthread_mod_delayed_work+0xc0/0xc0
  [87452.357880]  ret_from_fork+0x22/0x30
  (...)
  < stack traces of several tasks waiting for the locks of the inodes of the
    clone operation >
  (...)
  [92867.444138] RSP: 002b:00007ffc3371bbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000052
  [92867.444624] RAX: ffffffffffffffda RBX: 00007ffc3371bea0 RCX: 00007f61efe73f97
  [92867.445116] RDX: 0000000000000000 RSI: 0000560fbd5d7a40 RDI: 0000560fbd5d8960
  [92867.445595] RBP: 00007ffc3371beb0 R08: 0000000000000001 R09: 0000000000000003
  [92867.446070] R10: 00007ffc3371b996 R11: 0000000000000246 R12: 0000000000000000
  [92867.446820] R13: 000000000000001f R14: 00007ffc3371bea0 R15: 00007ffc3371beb0
  [92867.447361] task:fsstress        state:D stack:    0 pid:2508238 ppid:2508153 flags:0x00004000
  [92867.447920] Call Trace:
  [92867.448435]  __schedule+0x5d1/0xcf0
  [92867.448934]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [92867.449423]  schedule+0x45/0xe0
  [92867.449916]  __reserve_bytes+0x4a4/0xb10 [btrfs]
  [92867.450576]  ? finish_wait+0x90/0x90
  [92867.451202]  btrfs_reserve_metadata_bytes+0x29/0x190 [btrfs]
  [92867.451815]  btrfs_block_rsv_add+0x1f/0x50 [btrfs]
  [92867.452412]  start_transaction+0x2d1/0x760 [btrfs]
  [92867.453216]  clone_copy_inline_extent+0x333/0x490 [btrfs]
  [92867.453848]  ? lock_release+0x20e/0x4c0
  [92867.454539]  ? btrfs_search_slot+0x9a7/0xc30 [btrfs]
  [92867.455218]  btrfs_clone+0x569/0x7e0 [btrfs]
  [92867.455952]  btrfs_clone_files+0xf6/0x150 [btrfs]
  [92867.456588]  btrfs_remap_file_range+0x324/0x3d0 [btrfs]
  [92867.457213]  do_clone_file_range+0xd4/0x1f0
  [92867.457828]  vfs_clone_file_range+0x4d/0x230
  [92867.458355]  ? lock_release+0x20e/0x4c0
  [92867.458890]  ioctl_file_clone+0x8f/0xc0
  [92867.459377]  do_vfs_ioctl+0x342/0x750
  [92867.459913]  __x64_sys_ioctl+0x62/0xb0
  [92867.460377]  do_syscall_64+0x33/0x80
  [92867.460842]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  (...)
  < stack traces of more tasks blocked on metadata reservation like the clone
    task above, because the async reclaim task has deadlocked >
  (...)

Another thing to notice is that the worker task that is deadlocked when
trying to flush the destination inode of the clone operation is at
btrfs_invalidatepage(). This is simply because the clone operation has a
destination offset greater than the i_size and we only update the i_size
of the destination file after cloning an extent (just like we do in the
buffered write path).

Since the async reclaim path uses btrfs_start_delalloc_roots() to trigger
the flushing of delalloc for all inodes that have delalloc, add a runtime
flag to an inode to signal it should not be flushed, and for inodes with
that flag set, start_delalloc_inodes() will simply skip them. When the
cloning code needs to dirty a page to copy an inline extent, set that flag
on the inode and then clear it when the clone operation finishes.

This could be sporadically triggered with test case generic/269 from
fstests, which exercises many fsstress processes running in parallel with
several dd processes filling up the entire filesystem.

CC: stable@vger.kernel.org # 5.9+
Fixes: 05a5a7621c ("Btrfs: implement full reflink support for inline extents")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2020-12-18 14:49:50 +01:00
Linus Torvalds
f1ee3b8829 for-5.11-tag 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl/XdB4ACgkQxWXV+ddt
 WDv41g//dOkrwjAVBfDUwRT/yKqojyEsZB1aNyHlPHFw8KEw5oIW7wxR4oqXi2ed
 /i9KIJe4E9AfqAiexhLvA+Wyt/Sgwz+k4ys82PKhhRNQn7LE4tvhSBUu6JYJDU09
 6I1jagya7ILa8akFXZTmVbXdliI4Ab+pcXWAmQYK/xPVDxYTSsBf4o4MilNBA9FS
 lTwwBh5GTEtIkubr2yVd3pKfF4fT2g1hd+yglpHaOzpcrLMNN4hj4sUFlLbx/FlJ
 MWo+914cSNKJoebbnqhK9djD9hggaaXnNooqfBOXUhZN0VN9rQoKb5tW+TREQmFm
 shrmBSqN7CaqKfSOMZs7WOnTuTvmV/825PnLqDqcTUaLw+BgdyacpO9WflgfSs16
 Cdvagr1SqbrSQ/3WYCpbqPLDNP3XuZ6+m5OWizf6fhyo8xdFcUHZgRC8qejDlycy
 V/zP0c5OYOMi5vo6x/zhrD7Uft7xoFUVcSJCe8WPri082d9LbA2BqwCsullD60PQ
 K/fsmlHs5Uxxy3MFgBPVDdWGgaa9rQ2vXequezbozBIIeeVL+Q9zkeyBFSYuFeE8
 HToRE9B9BUEUh+p1JxPjOdFH/m+sKe1WMdmRLQthMzfOiNWW7pp/nL5rl4BUVmjm
 58dQS73Cj/YNdBomRJXPPtgKIJPAWRrzU/JBcwAdMoKy57oh9NQ=
 =5YAS
 -----END PGP SIGNATURE-----

Merge tag 'for-5.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
 "We have a mix of all kinds of changes, feature updates, core stuff,
  performance improvements and lots of cleanups and preparatory changes.

  User visible:

   - export filesystem generation in sysfs

   - new features for mount option 'rescue':
       - what's currently supported is exported in sysfs
       - 'ignorebadroots'/'ibadroots' - continue even if some essential
         tree roots are not usable (extent, uuid, data reloc, device,
         csum, free space)
       - 'ignoredatacsums'/'idatacsums' - skip checksum verification on
         data
       - 'all' - now enables 'ignorebadroots' + 'ignoredatacsums' +
         'nologreplay'

   - export read mirror policy settings to sysfs, new policies will be
     added in the future

   - remove inode number cache feature (mount -o inode_cache), obsoleted
     in 5.9

  User visible fixes:

   - async discard scheduling fixes on high loads

   - update inode byte counter atomically so stat() does not report
     wrong value in some cases

   - free space tree fixes:
       - correctly report status of v2 after remount
       - clear v1 cache inodes when v2 is newly enabled after remount

  Core:

   - switch own tree lock implementation to standard rw semaphore:
       - one-level lock nesting is not required anymore, the last use of
         this was in free space that's now loaded asynchronously
       - own implementation of adaptive spinning before taking mutex has
         been part of rwsem
       - performance seems to be better in general, much better (+tens
         of percents) for some workloads
       - lockdep does not complain

   - finish direct IO conversion to iomap infrastructure, remove
     temporary workaround for DSYNC after iomap API updates

   - preparatory work to support data and metadata blocks smaller than
     page:
       - generalize code that assumes sectorsize == PAGE_SIZE, lots of
         refactoring
       - planned namely for 64K pages (eg. arm64, ppc64)
       - scrub read-only support

   - preparatory work for zoned allocation mode (SMR/ZBC/ZNS friendly):
       - disable incompatible features
       - round-robin superblock write

   - free space cache (v1) is loaded asynchronously, remove tree path
     recursion

   - slightly improved time tacking for transaction kthread wake ups

  Performance improvements (note that the numbers depend on load type or
  other features and weren't run on the same machine):

   - skip unnecessary work:
       - do not start readahead for csum tree when scrubbing non-data
         block groups
       - do not start and wait for delalloc on snapshot roots on
         transaction commit
       - fix race when defragmenting leads to unnecessary IO

   - dbench speedups (+throughput%/-max latency%):
       - skip unnecessary searches for xattrs when logging an inode
         (+10.8/-8.2)
       - stop incrementing log batch when joining log transaction (1-2)
       - unlock path before checking if extent is shared during nocow
         writeback (+5.0/-20.5), on fio load +9.7% throughput/-9.8%
         runtime
       - several tree log improvements, eg. removing unnecessary
         operations, fixing races that lead to additional work
         (+12.7/-8.2)

   - tree-checker error branches annotated with unlikely() (+3%
     throughput)

  Other:

   - cleanups

   - lockdep fixes

   - more btrfs_inode conversions

   - error variable cleanups"

* tag 'for-5.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (198 commits)
  btrfs: scrub: allow scrub to work with subpage sectorsize
  btrfs: scrub: support subpage data scrub
  btrfs: scrub: support subpage tree block scrub
  btrfs: scrub: always allocate one full page for one sector for RAID56
  btrfs: scrub: reduce width of extent_len/stripe_len from 64 to 32 bits
  btrfs: refactor btrfs_lookup_bio_sums to handle out-of-order bvecs
  btrfs: remove btrfs_find_ordered_sum call from btrfs_lookup_bio_sums
  btrfs: handle sectorsize < PAGE_SIZE case for extent buffer accessors
  btrfs: update num_extent_pages to support subpage sized extent buffer
  btrfs: don't allow tree block to cross page boundary for subpage support
  btrfs: calculate inline extent buffer page size based on page size
  btrfs: factor out btree page submission code to a helper
  btrfs: make btrfs_verify_data_csum follow sector size
  btrfs: pass bio_offset to check_data_csum() directly
  btrfs: rename bio_offset of extent_submit_bio_start_t to dio_file_offset
  btrfs: fix lockdep warning when creating free space tree
  btrfs: skip space_cache v1 setup when not using it
  btrfs: remove free space items when disabling space cache v1
  btrfs: warn when remount will not change the free space tree
  btrfs: use superblock state to print space_cache mount option
  ...
 2020-12-15 18:40:42 -08:00
Linus Torvalds
edd7ab7684 The new preemtible kmap_local() implementation: 
- Consolidate all kmap_atomic() internals into a generic implementation
     which builds the base for the kmap_local() API and make the
     kmap_atomic() interface wrappers which handle the disabling/enabling of
     preemption and pagefaults.
 
   - Switch the storage from per-CPU to per task and provide scheduler
     support for clearing mapping when scheduling out and restoring them
     when scheduling back in.
 
   - Merge the migrate_disable/enable() code, which is also part of the
     scheduler pull request. This was required to make the kmap_local()
     interface available which does not disable preemption when a mapping
     is established. It has to disable migration instead to guarantee that
     the virtual address of the mapped slot is the same accross preemption.
 
   - Provide better debug facilities: guard pages and enforced utilization
     of the mapping mechanics on 64bit systems when the architecture allows
     it.
 
   - Provide the new kmap_local() API which can now be used to cleanup the
     kmap_atomic() usage sites all over the place. Most of the usage sites
     do not require the implicit disabling of preemption and pagefaults so
     the penalty on 64bit and 32bit non-highmem systems is removed and quite
     some of the code can be simplified. A wholesale conversion is not
     possible because some usage depends on the implicit side effects and
     some need to be cleaned up because they work around these side effects.
 
     The migrate disable side effect is only effective on highmem systems
     and when enforced debugging is enabled. On 64bit and 32bit non-highmem
     systems the overhead is completely avoided.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XyQwTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoUolD/9+R+BX96fGir+I8rG9dc3cbLw5meSi
 0I/Nq3PToZMs2Iqv50DsoaPYHHz/M6fcAO9LRIgsE9jRbnY93GnsBM0wU9Y8yQaT
 4wUzOG5WHaLDfqIkx/CN9coUl458oEiwOEbn79A2FmPXFzr7IpkufnV3ybGDwzwP
 p73bjMJMPPFrsa9ig87YiYfV/5IAZHi82PN8Cq1v4yNzgXRP3Tg6QoAuCO84ZnWF
 RYlrfKjcJ2xPdn+RuYyXolPtxr1hJQ0bOUpe4xu/UfeZjxZ7i1wtwLN9kWZe8CKH
 +x4Lz8HZZ5QMTQ9sCHOLtKzu2MceMcpISzoQH4/aFQCNMgLn1zLbS790XkYiQCuR
 ne9Cua+IqgYfGMG8cq8+bkU9HCNKaXqIBgPEKE/iHYVmqzCOqhW5Cogu4KFekf6V
 Wi7pyyUdX2en8BAWpk5NHc8de9cGcc+HXMq2NIcgXjVWvPaqRP6DeITERTZLJOmz
 XPxq5oPLGl7wdm7z+ICIaNApy8zuxpzb6sPLNcn7l5OeorViORlUu08AN8587wAj
 FiVjp6ZYomg+gyMkiNkDqFOGDH5TMENpOFoB0hNNEyJwwS0xh6CgWuwZcv+N8aPO
 HuS/P+tNANbD8ggT4UparXYce7YCtgOf3IG4GA3JJYvYmJ6pU+AZOWRoDScWq4o+
 +jlfoJhMbtx5Gg==
 =n71I
 -----END PGP SIGNATURE-----

Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull kmap updates from Thomas Gleixner:
 "The new preemtible kmap_local() implementation:

   - Consolidate all kmap_atomic() internals into a generic
     implementation which builds the base for the kmap_local() API and
     make the kmap_atomic() interface wrappers which handle the
     disabling/enabling of preemption and pagefaults.

   - Switch the storage from per-CPU to per task and provide scheduler
     support for clearing mapping when scheduling out and restoring them
     when scheduling back in.

   - Merge the migrate_disable/enable() code, which is also part of the
     scheduler pull request. This was required to make the kmap_local()
     interface available which does not disable preemption when a
     mapping is established. It has to disable migration instead to
     guarantee that the virtual address of the mapped slot is the same
     across preemption.

   - Provide better debug facilities: guard pages and enforced
     utilization of the mapping mechanics on 64bit systems when the
     architecture allows it.

   - Provide the new kmap_local() API which can now be used to cleanup
     the kmap_atomic() usage sites all over the place. Most of the usage
     sites do not require the implicit disabling of preemption and
     pagefaults so the penalty on 64bit and 32bit non-highmem systems is
     removed and quite some of the code can be simplified. A wholesale
     conversion is not possible because some usage depends on the
     implicit side effects and some need to be cleaned up because they
     work around these side effects.

     The migrate disable side effect is only effective on highmem
     systems and when enforced debugging is enabled. On 64bit and 32bit
     non-highmem systems the overhead is completely avoided"

* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  ARM: highmem: Fix cache_is_vivt() reference
  x86/crashdump/32: Simplify copy_oldmem_page()
  io-mapping: Provide iomap_local variant
  mm/highmem: Provide kmap_local*
  sched: highmem: Store local kmaps in task struct
  x86: Support kmap_local() forced debugging
  mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
  mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
  microblaze/mm/highmem: Add dropped #ifdef back
  xtensa/mm/highmem: Make generic kmap_atomic() work correctly
  mm/highmem: Take kmap_high_get() properly into account
  highmem: High implementation details and document API
  Documentation/io-mapping: Remove outdated blurb
  io-mapping: Cleanup atomic iomap
  mm/highmem: Remove the old kmap_atomic cruft
  highmem: Get rid of kmap_types.h
  xtensa/mm/highmem: Switch to generic kmap atomic
  sparc/mm/highmem: Switch to generic kmap atomic
  powerpc/mm/highmem: Switch to generic kmap atomic
  nds32/mm/highmem: Switch to generic kmap atomic
  ...
 2020-12-14 18:35:53 -08:00
Qu Wenruo
6275193ef1 btrfs: refactor btrfs_lookup_bio_sums to handle out-of-order bvecs 
Refactor btrfs_lookup_bio_sums() by:

- Remove the @file_offset parameter
  There are two factors making the @file_offset parameter useless:

  * For csum lookup in csum tree, file offset makes no sense
    We only need disk_bytenr, which is unrelated to file_offset

  * page_offset (file offset) of each bvec is not contiguous.
    Pages can be added to the same bio as long as their on-disk bytenr
    is contiguous, meaning we could have pages at different file offsets
    in the same bio.

  Thus passing file_offset makes no sense any more.
  The only user of file_offset is for data reloc inode, we will use
  a new function, search_file_offset_in_bio(), to handle it.

- Extract the csum tree lookup into search_csum_tree()
  The new function will handle the csum search in csum tree.
  The return value is the same as btrfs_find_ordered_sum(), returning
  the number of found sectors which have checksum.

- Change how we do the main loop
  The only needed info from bio is:
  * the on-disk bytenr
  * the length

  After extracting the above info, we can do the search without bio
  at all, which makes the main loop much simpler:

	for (cur_disk_bytenr = orig_disk_bytenr;
	     cur_disk_bytenr < orig_disk_bytenr + orig_len;
	     cur_disk_bytenr += count * sectorsize) {

		/* Lookup csum tree */
		count = search_csum_tree(fs_info, path, cur_disk_bytenr,
					 search_len, csum_dst);
		if (!count) {
			/* Csum hole handling */
		}
	}

- Use single variable as the source to calculate all other offsets
  Instead of all different type of variables, we use only one main
  variable, cur_disk_bytenr, which represents the current disk bytenr.

  All involved values can be calculated from that variable, and
  all those variable will only be visible in the inner loop.

The above refactoring makes btrfs_lookup_bio_sums() way more robust than
it used to be, especially related to the file offset lookup.  Now
file_offset lookup is only related to data reloc inode, otherwise we
don't need to bother file_offset at all.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2020-12-09 19:16:11 +01:00
Qu Wenruo
884b07d0f4 btrfs: handle sectorsize < PAGE_SIZE case for extent buffer accessors 
To support sectorsize < PAGE_SIZE case, we need to take extra care of
extent buffer accessors.

Since sectorsize is smaller than PAGE_SIZE, one page can contain
multiple tree blocks, we must use eb->start to determine the real offset
to read/write for extent buffer accessors.

This patch introduces two helpers to do this:

- get_eb_page_index()
  This is to calculate the index to access extent_buffer::pages.
  It's just a simple wrapper around "start >> PAGE_SHIFT".

  For sectorsize == PAGE_SIZE case, nothing is changed.
  For sectorsize < PAGE_SIZE case, we always get index as 0, and
  the existing page shift also works.

- get_eb_offset_in_page()
  This is to calculate the offset to access extent_buffer::pages.
  This needs to take extent_buffer::start into consideration.

  For sectorsize == PAGE_SIZE case, extent_buffer::start is always
  aligned to PAGE_SIZE, thus adding extent_buffer::start to
  offset_in_page() won't change the result.
  For sectorsize < PAGE_SIZE case, adding extent_buffer::start gives
  us the correct offset to access.

This patch will touch the following parts to cover all extent buffer
accessors:

- BTRFS_SETGET_HEADER_FUNCS()
- read_extent_buffer()
- read_extent_buffer_to_user()
- memcmp_extent_buffer()
- write_extent_buffer_chunk_tree_uuid()
- write_extent_buffer_fsid()
- write_extent_buffer()
- memzero_extent_buffer()
- copy_extent_buffer_full()
- copy_extent_buffer()
- memcpy_extent_buffer()
- memmove_extent_buffer()
- btrfs_get_token_##bits()
- btrfs_get_##bits()
- btrfs_set_token_##bits()
- btrfs_set_##bits()
- generic_bin_search()

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2020-12-09 19:16:10 +01:00
Qu Wenruo
deb6789553 btrfs: calculate inline extent buffer page size based on page size 
Btrfs only support 64K as maximum node size, thus for 4K page system, we
would have at most 16 pages for one extent buffer.

For a system using 64K page size, we would really have just one page.

While we always use 16 pages for extent_buffer::pages, this means for
systems using 64K pages, we are wasting memory for 15 page pointers
which will never be used.

Calculate the array size based on page size and the node size maximum.

- for systems using 4K page size, it will stay 16 pages
- for systems using 64K page size, it will be 1 page

Move the definition of BTRFS_MAX_METADATA_BLOCKSIZE to btrfs_tree.h, to
avoid circular inclusion of ctree.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2020-12-09 19:16:10 +01:00
Qu Wenruo
7ffd27e378 btrfs: pass bio_offset to check_data_csum() directly 
Parameter icsum for check_data_csum() is a little hard to understand.
So is the phy_offset for btrfs_verify_data_csum().

Both parameters are calculated values for csum lookup.

Instead of some calculated value, just pass bio_offset and let the
final and only user, check_data_csum(), calculate whatever it needs.

Since we are here, also make the bio_offset parameter and some related
variables to be u32 (unsigned int).
As bio size is limited by its bi_size, which is unsigned int, and has
extra size limit check during various bio operations.
Thus we are ensured that bio_offset won't overflow u32.

Thus for all involved functions, not only rename the parameter from
@phy_offset to @bio_offset, but also reduce its width to u32, so we
won't have suspicious "u32 = u64 >> sector_bits;" lines anymore.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2020-12-09 19:16:09 +01:00