Ingo Molnar wrote:
> allyes64 build failure:
>
> arch/x86/kernel/io_apic.c: In function ‘set_ir_ioapic_affinity_irq_desc’:
> arch/x86/kernel/io_apic.c:2295: error: incompatible type for argument 2 of
> ‘migrate_ioapic_irq_desc’
> arch/x86/kernel/io_apic.c: In function ‘ir_set_msi_irq_affinity’:
> arch/x86/kernel/io_apic.c:3205: error: incompatible type for argument 2 of
> ‘set_extra_move_desc’
> make[1]: *** wait: No child processes. Stop.
Here's a small patch to correct the build error with the post-merge tree.
Built and boot-tested. I'll will reset the follow on patches in my brand
new git tree to accommodate this change.
Fix two references in io_apic.c that were incorrect.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we create xattr bucket during the process of xattr set, we always
need to update the ocfs2_xattr_search since even if the bucket size is
the same as block size, the offset will change because of the removal
of the ocfs2_xattr_block header.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Impact: cleanup
Use __USER32_DS instead of __USER_DS in ia32_signal.c.
No impact, because __USER32_DS is defined __USER_DS.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
__put_user() can be used for constant size 8, like arch/x86/kernel/signal.c.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Call signal_fault() in error route of sys_sigreturn().
Change log level to KERN_EMERG if current is init.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix crash
xpc needs to pass the physical address, not virtual.
Testing uncovered this problem. The virtual address happens to work
most of the time due to the way bios was masking off the node bits.
Passing the physical address makes it work all of the time.
Signed-off-by: Russ Anderson <rja@sgi.com>
Acked-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix disabled MCE after resume
Don't prevent multiple initialization of MCEs.
Back from early prehistory mcheck_init() has a reentry check. Presumably
that was needed in very old kernels to prevent it entering twice.
But as Andreas points out this prevents CPU hotplug (and therefore resume)
to correctly reinitialize MCEs when a AP boots again after being
offlined.
Just drop the check.
Reported-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix UV boot crash
This fixes a UV bug related to generating global memory addresses
on partitioned systems. Partition systems do not have physical memory
at address 0. Instead, a chunk of high memory is remapped by the chipset
so that it appears to be at address 0. This remapping is INVISIBLE to most
of the OS. The only OS functions that need to be aware of the remaping are
functions that directly interface to the chipset. The GRU is one example.
Also, delete a couple of unused macros related to global memory addresses.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, remove dead debug code
I ran across some old debugging code in vmi paravirt-ops code that was
already dead, but still potentially useful. After reviewing recent
changes to the way kernel page tables are allocated and initialized, and
the lack of bugs caught by this debugging code, I've concluded it is now
totally useless to have around, and it's already been #if 0'd for quite
some time.
There's no rush to get this in mainline, but it's also totally harmless,
so I'll let the x86 maintainers decide where it should be tucked. I've
been out of the mainstream dev loop for a couple months, so apologies if
I haven't got any protocol changes in order.
Remove mummified remains found in vmi_32.c
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Certain HP machines require the full 64 bits of _SUN as allowed
by the ACPI spec. Without this change, we get name collisions in
the lower 32 bits of the _SUN returned by firmware.
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Justin Chen <justin.chen@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch fixes the problem that causes an occupied slot to be turned
off even if it has a working device.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
What we have to check here before calling is err_handler->resume, not
->slot_reset. Looks like a copy & paste error from report_slot_reset.
Acked-by: Yanmin Zhang <yanmin.zhang@intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Impact: clarify documentation
Documentation/x86/boot.txt describes payload_offset as the offset
from the end of the real-mode code. In fact, it is more accurately
described as the offset from the beginning of the protected-mode
code, as (a) this is how it is actually calculated and (b) the padding
after the real-mode code is not included in the offset.
Signed-off-by: Philipp Kohlbecher <xt28@gmx.de>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: prepare the hpet code for Xen dom0 booting
When booting in Xen dom0, the hpet isn't really accessible, so make
sure the mapping is non-NULL before use.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
hypervisor.h had accumulated a lot of crud, including lots of spurious
#includes. Clean it all up, and go around fixing up everything else
accordingly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix potential of rare crash
for_each_leaf_rt_rq() walks an RCU protected list (rq->leaf_rt_rq_list),
but doesn't use list_for_each_entry_rcu(). Fix this.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: generalize swiotlb allocation code
Architectures may need to allocate memory specially for use with
the swiotlb. Create the weak function swiotlb_alloc_boot() and
swiotlb_alloc() defaulting to the current behaviour.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, remove dead code
The last usage was removed by the patch set culminating in
| commit e3c449f526
| Author: Joerg Roedel <joerg.roedel@amd.com>
| Date: Wed Oct 15 22:02:11 2008 -0700
|
| x86, AMD IOMMU: convert driver to generic iommu_num_pages function
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As noted by Julia Lawall <julia@diku.dk>, we can never
trigger the check for being in suspend due to the result
of !readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN
always being 0.
Add suspend/resume hooks to stop i2c transactions happening
until the driver has been resumed.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Impact: cleanup
In asm/syscalls.h moved out sys_modify_ldt from CONFIG_X86_32 as it is
common for both 32 and 64 bit.
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make the driver report an ENXIO error immediately upon NAK instead of
waiting for another interrupt and getting a timeout.
When reading from a device that is not present or declines to respond
to, e.g., a non-existent register address, CPM immediately reports a
NAK condition in the TxBD, but the driver kept waiting until a timeout,
which takes 1 second and causes an ugly console error message.
Signed-off-by: Mike Ditto <mditto@consentry.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
[ben-linux@fluff.org: reordered description text]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Impact: cleanup
In asm/signal.h moved out do_notify_resume from __i386__ as it is common
for both 32 and 64 bit.
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/include/asm/signal.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
Impact: cleanup
In asm/system.h moved out __switch_to from CONFIG_X86_32 as it is common for
both 32 and 64 bit.
In asm/pctl.h defined sys_arch_prctl
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: reward non-stop TSCs with good TSC-based clocksources, etc.
Add support for CPUID_0x80000007_Bit8 on Intel CPUs as well. This bit means
that the TSC is invariant with C/P/T states and always runs at constant
frequency.
With Intel CPUs, we have 3 classes
* CPUs where TSC runs at constant rate and does not stop n C-states
* CPUs where TSC runs at constant rate, but will stop in deep C-states
* CPUs where TSC rate will vary based on P/T-states and TSC will stop in deep
C-states.
To cover these 3, one feature bit (CONSTANT_TSC) is not enough. So, add a
second bit (NONSTOP_TSC). CONSTANT_TSC indicates that the TSC runs at
constant frequency irrespective of P/T-states, and NONSTOP_TSC indicates
that TSC does not stop in deep C-states.
CPUID_0x8000000_Bit8 indicates both these feature bit can be set.
We still have CONSTANT_TSC _set_ and NONSTOP_TSC _not_set_ on some older Intel
CPUs, based on model checks. We can use TSC on such CPUs for time, as long as
those CPUs do not support/enter deep C-states.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new synthetic-cpuid bit definition
add X86_FEATURE_NONSTOP_TSC to the cpufeature bits - this is in
preparation of Venki's always-running-TSC patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A bug in the fusion driver was exposed by the switch to block timeout.
Basically, drivers are supposed to terminate commands once error
handling begins on them. The fusion apparently wasn't doing this.
Under the old timeout regime, completions on terminated commands would
by and large get ignored because of the way command timeouts used to
work. The new block timers are very intolerant to this, though,
becuase the request gets cleaned and freed.
Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=12195
Reported-by: Alex Shi <alex.shi@intel.com>
Tested-by: Ming Lin <ming.m.lin@intel.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Impact: auto-enable HPET on Fujitsu u9200
HPET timer is listed in the ACPI table, but needs a quirk entry in order to
work. Unfortunately, the quirk code runs after first HPET hpet_enable() which
has already determined that the timer doesn't work (reads 0xFFFFFFFF). This
patch allows hpet_enable() to be called again after running the quirk code.
Signed-off-by: Janne Kulmala <janne.t.kulmala@tut.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove dead/incorrect code
Currently there is no chipset specific ucode. The checks are incorrect
anyway (e.g. pci device IDs are 16 bit and not 8 bit).
Thus I remove the stuff for the time being and will reintroduce it if
it's foreseeable that it is really needed.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix build warning
CC arch/x86/kernel/microcode_amd.o
arch/x86/kernel/microcode_amd.c: In function ‘request_microcode_fw’:
arch/x86/kernel/microcode_amd.c:393: warning: passing argument 2 of ‘generic_load_microcode’ discards qualifiers from pointer target type
(Respect "const" qualifier of firmware->data.)
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix bug resulting in non-loaded AMD microcode
mc_header->processor_rev_id is a 2 byte value. Similar is true for
equiv_cpu in an equiv_cpu_entry -- only 2 bytes are of interest.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The v4l_compat_ioctl32() function only tested for the presence of the
ioctl op, not for unlocked_ioctl. So it would always return an error
when used with drivers that use unlocked_ioctl instead of ioctl.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When the tuner modules were moved to common/tuners, a separate customize
option were added for tuners. However, the automatic selection of the
tuners were still using the older option.
This causes that the automatic selection to fail, if DVB_FE_CUSTOMISE is
selected. Also, since those tuners are now under MEDIA_TUNER_CUSTOMIZE
menu, if you unset MEDIA_TUNER_CUSTOMIZE, you can't manually select the
tuners.
This patch fixes this error by replacing DVB_FE_CUSTOMISE by
MEDIA_TUNER_CUSTOMIZE on all places were a tuner is selected.
The patch were generated by this small script:
for i in `find drivers/media -name Kconfig`; do
cat $i|perl -ne 's/(MEDIA_TUNER.*)DVB_FE_CUSTOMISE/\1MEDIA_TUNER_CUSTOMIZE/; print $_' >a
mv a $i
done
Also, manually reordered the tuner entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
At some point the Flexcop driver was changed to support newer Flexcop cards.
These modifications however broke the detection of Cablestar 2 DVB-C cards.
The reason is that the earlier version of the driver used to retry
unsuccessful i2c operations. The demodulator of Cablestar 2 cards (stv0297)
seems to be very dependent on these retries and adding them back fixes
Cablestar detection.
This patch restores this behaviour for the CableStar2.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A user noticed that there would continue to be 4-6 keypresses even after the
user stopped holding down the button. This was because we were not reading
the bulk pipe faster than the firmware was injecting information, which would
result in a backlog.
Make the query interval faster, and increase the number of cycles before we
start repeating to compensate.
Thanks to Knud Poulsen <knud.poulsen@nokia.com> for pointing this out.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
