Commit 192b6a7805 ("powerpc/book3s64/pkeys: Fix
pkey_access_permitted() for execute disable pkey") fixed a
bug that caused repetitive faults for pkeys with no execute
rights alongside some combination of read and write rights.
This removes the last two cases of the test, which check
the behaviour of pkeys with read, write but no execute
rights and all the rights, in favour of checking all the
possible combinations of read, write and execute rights
to be able to detect bugs like the one mentioned above.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/db467500f8af47727bba6b35796e8974a78b71e5.1595821792.git.sandipan@linux.ibm.com
Update our memcmp selftest, to test the case where we're comparing up
to the end of a page and the subsequent page is not mapped. We have to
make sure we don't read off the end of the page and cause a fault.
We had a bug there in the past, fixed in commit
d947075739 ("powerpc/64: Fix memcmp reading past the end of src/dest").
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722055315.962391-1-mpe@ellerman.id.au
On PAPR+ the hcall() on 0x1B0 is called H_DISABLE_AND_GET, but got
defined as H_DISABLE_AND_GETC instead.
This define was introduced with a typo in commit <b13a96cfb055>
("[PATCH] powerpc: Extends HCALL interface for InfiniBand usage"), and was
later used without having the typo noticed.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200707004812.190765-1-leobras.c@gmail.com
Power ISA v3.1 has added new performance monitoring unit (PMU) special
purpose registers (SPRs). They are:
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register A (SIER2)
Sampled Instruction Event Register B (SIER3)
Add support to save/restore these new SPRs while entering/exiting
guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3.
Add new SPRs to KVM API documentation.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-6-git-send-email-atrajeev@linux.vnet.ibm.com
ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.
We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).
- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
so applications would get a failure at mmap() time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com
The per_event_excludes test wants to run on Power8 or later. But
currently it checks that AT_BASE_PLATFORM *equals* power8, which means
it only runs on Power8.
Fix it to check for the ISA 2.07 feature, which will be set on Power8
and later CPUs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716122142.3776261-1-mpe@ellerman.id.au
With commit 4a4a5e5d2a ("powerpc/pkeys: key allocation/deallocation
must not change pkey registers") we are not updating UAMOR on key
allocation. So don't update the expected uamor value in the test.
Fixes: 4a4a5e5d2a ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-23-aneesh.kumar@linux.ibm.com
ERR_NX_TRANSLATION(CSB.CC=5) is for internal to VAS for fault handling
and should not used by OS. ERR_NX_AT_FAULT(CSB.CC=250) is the proper
error code should be reported by OS when NX encounters address
translation failure.
This patch uses CC=250 to determine the fault address when the request
is not successful.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0315251705baff94f678c33178491b5008723511.camel@linux.ibm.com
An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.
Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):
==========
...
[21]: counter = 8
[22]: register SPRN_MMCR0 = 0x0000000080000080
[23]: register SPRN_PMC1 = 0x0000000080000004
[24]: counter = 9
[25]: register SPRN_MMCR0 = 0x0000000080000080
[26]: register SPRN_PMC1 = 0x0000000080000004
[27]: counter = 10
[28]: register SPRN_MMCR0 = 0x0000000080000080
[29]: register SPRN_PMC1 = 0x0000000080000004
>> [30]: register SPRN_PMC1 = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
Apart from read and write access, memory protection keys can
also be used for restricting execute permission of pages on
powerpc. This adds a test to verify if the feature works as
expected.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200604125610.649668-4-sandipan@linux.ibm.com
The Power ISA mandates that all writes to the Authority
Mask Register (AMR) must always be preceded as well as
succeeded by a context synchronizing instruction.
This makes sure that the tests follow this requirement
when attempting to update a pkey's access rights.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200604125610.649668-2-sandipan@linux.ibm.com
We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e ("selftests/powerpc: Fix try-run when source tree is not writable")
Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
Extend the alignment handler selftest to exercise prefixed load store
instructions. Add tests for prefixed VSX, floating point and integer
instructions.
Skip prefix tests if ISA version does not support prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fixup PPC_FEATURE2_ARCH_3_1 naming as noted by Alistair]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-2-jniethe5@gmail.com
The alignment handler selftest needs cache-inhibited memory and
currently /dev/fb0 is relied on to provided this. This prevents running
the test on systems without /dev/fb0 (e.g., mambo). Read the commandline
arguments for an optional path to be used instead, as well as an
optional offset to be for mmaping this path.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-1-jniethe5@gmail.com
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXu1jrRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoCMAP91nOccE3X+Nvc3zET3isDWnl1tWJxk
icsBgN/JwBRuTAD/dnWTHIWM2/5lTiagvyVsmINdJHP6JLr8T7dpN9tlxAQ=
=Cuo7
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
- Few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings.
- Cleanup unused pm callbacks in virtio ccw.
- Replace kmalloc + memset with kzalloc in crypto.
- Use $(LD) for vDSO linkage to make clang happy.
- Fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res().
- Fix workqueue cpumask warning when NUMA=n and nr_node_ids=2.
- Reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio.
- Few fixes to use scnprintf() instead of snprintf().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7uJy8ACgkQjYWKoQLX
FBitMwgAovHP6O19ZS2RE2Ps20CjM+z0sLLGHF6aMrV7OqmOWrNnFzN4jT2j42Ck
idSZ6sehVd3Uj6K8NnzrlSS3sjGRhVaQJEjjN+rLyw0HBwxspJJfW5HgcoMtqNH1
oo+nt+zw5jk+6MqHx4QEwTxN5rgGs6UMhiLIAIlkDu4bivgohvGUxe4RUrN/mINx
cdYqomCkvovLT5sBTaWyXKNCDAdAWgNpOfdqc9MjOUXSbUg3lrUol0gUULzenPo7
wUN+sZ0di0Ox0+2+4m8LU1av/kMTLSSvnR9DW5KdpGTon1nwpZcdJnhI5o1v7uaU
pIaMOYNieEHJ2DnieR9iBBSbGoNCmw==
=gkgN
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- a few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings
- cleanup unused pm callbacks in virtio ccw
- replace kmalloc + memset with kzalloc in crypto
- use $(LD) for vDSO linkage to make clang happy
- fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res()
- fix workqueue cpumask warning when NUMA=n and nr_node_ids=2
- reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio
- a few fixes to use scnprintf() instead of snprintf()
* tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix syscall_get_error for compat processes
s390/qdio: warn about unexpected SLSB states
s390/qdio: clean up usage of qdio_data
s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES
s390/vdso: fix vDSO clock_getres()
s390/vdso: Use $(LD) instead of $(CC) to link vDSO
s390/protvirt: use scnprintf() instead of snprintf()
s390: use scnprintf() in sys_##_prefix##_##_name##_show
s390/crypto: use scnprintf() instead of snprintf()
s390/zcrypt: use kzalloc
s390/virtio: remove unused pm callbacks
s390/qdio: reduce SLSB writes during Input Queue processing
selftests/seccomp: s390 shares the syscall and return value register
s390/ptrace: fix setting syscall number
s390/ptrace: pass invalid syscall numbers to tracing
s390/ptrace: return -ENOSYS when invalid syscall is supplied
s390/seccomp: pass syscall arguments via seccomp_data
s390/qdio: fine-tune SLSB update
This Kselftest update for Linux 5.8-rc2 consists of:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
-----BEGIN PGP SIGNATURE-----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=nqUq
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest cleanups from Shuah Khan:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
* tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Support ":README" suffix for requires
selftests/ftrace: Support ":tracer" suffix for requires
selftests/ftrace: Convert check_filter_file() with requires list
selftests/ftrace: Convert required interface checks into requires list
selftests/ftrace: Add "requires:" list support
selftests/ftrace: Return unsupported for the unconfigured features
selftests/ftrace: Allow ":" in description
tools: testing: ftrace: trigger: fix spelling mistake
When build perf with ASan or UBSan, if libasan or libubsan can not find,
the feature-glibc is 0 and there exists the following error log which is
wrong, because we can find gnu/libc-version.h in /usr/include,
glibc-devel is also installed.
[yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address'
BUILD: Doing 'make -j4' parallel build
HOSTCC fixdep.o
HOSTLD fixdep-in.o
LINK fixdep
<stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target
<stdin>:1:0: warning: -fsanitize=address not supported for this target
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
Makefile.perf:224: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2
[yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h
/usr/include/gnu/libc-version.h
After install libasan and libubsan, the feature-glibc is 1 and the build
process is success, so the cause is related with libasan or libubsan, we
should check them and print an error log to reflect the reality.
Committer testing:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:401: *** No libasan found, please install libasan. Stop.
make[1]: *** [Makefile.perf:231: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
$
$ sudo dnf install libasan
<SNIP>
Installed:
libasan-9.3.1-2.fc31.x86_64
$
$
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
<SNIP>
CC /tmp/build/perf/util/pmu-flex.o
FLEX /tmp/build/perf/util/expr-flex.c
CC /tmp/build/perf/util/expr-bison.o
CC /tmp/build/perf/util/expr.o
CC /tmp/build/perf/util/expr-flex.o
CC /tmp/build/perf/util/parse-events-flex.o
CC /tmp/build/perf/util/parse-events.o
LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
INSTALL python-scripts
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000)
$
And if we rebuild without -fsanitize-address:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
CC /tmp/build/perf/exec-cmd.o
<SNIP>
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
$
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tiezhu yang <yangtiezhu@loongson.cn>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to move pointer checks like IS_ERR_VALUE() out of the hotpath
and into the reader path of a trace event, user space tools need to be
able to parse that. IS_ERR_VALUE() is defined as:
#define IS_ERR_VALUE() unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO)
Which eventually turns into:
__builtin_expect(!!((unsigned long)(void *)(x) >= (unsigned long)-4095), 0)
Now the traceevent parser can handle most of that except for the
__builtin_expect(), which needs to be added.
Link: https://lore.kernel.org/linux-mm/20200320055823.27089-3-jaewon31.kim@samsung.com/
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324200956.821799393@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit c61f13eaa1 ("gcc-plugins: Add structleak for more stack
initialization") added "__attribute__((user))" to the user when
stackleak detector is enabled. This now appears in the field format of
system call trace events for system calls that have user buffers. The
"__attribute__((user))" breaks the parsing in libtraceevent. That needs
to be handled.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324200956.663647256@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's several locations that open code realloc and strcat() to append
text to strings. Add an append() function that takes a delimiter and a
string to append to another string.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Lim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lore.kernel.org/lkml/20200324200956.515118403@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
b383a73f2b ("fs/ext4: Introduce DAX inode flag")
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
It causes various beautifiers for things like fspick, fsmount, etc (see
below) to get rebuilt, but this specific change doesn't make 'perf
trace' be capable of decoding anything new, as we still don't decode
what comes from ioctls, just its cmds.
Details about the update:
$ cp include/uapi/linux/fs.h tools/include/uapi/linux/fs.h
$ git diff
diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h
index 379a612f8f1d..f44eb0a04afd 100644
--- a/tools/include/uapi/linux/fs.h
+++ b/tools/include/uapi/linux/fs.h
@@ -262,6 +262,7 @@ struct fsxattr {
#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */
#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
+#define FS_DAX_FL 0x02000000 /* Inode is DAX */
#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */
#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */
$ m
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
INSTALL GTK UI
CC /tmp/build/perf/builtin-trace.o
DESCEND plugins
CC /tmp/build/perf/trace/beauty/fsmount.o
CC /tmp/build/perf/trace/beauty/fspick.o
CC /tmp/build/perf/trace/beauty/mount_flags.o
CC /tmp/build/perf/trace/beauty/move_mount.o
CC /tmp/build/perf/trace/beauty/renameat.o
CC /tmp/build/perf/trace/beauty/sync_file_range.o
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
7e5b3c267d ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation")
Addressing these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
With this one will be able to use these new AMD MSRs in filters, by
name, e.g.:
# perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
^C#
Using -v we can see how it sets up the tracepoint filters, converting
from the string in the filter to the numeric value:
# perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
Using CPUID GenuineIntel-6-8E-A
0x123
New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
mmap size 528384B
^C#
The updating process shows how this affects tooling in more detail:
$ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
--- tools/arch/x86/include/asm/msr-index.h 2020-06-03 10:36:09.959910238 -0300
+++ arch/x86/include/asm/msr-index.h 2020-06-17 10:04:20.235052901 -0300
@@ -128,6 +128,10 @@
#define TSX_CTRL_RTM_DISABLE BIT(0) /* Disable RTM feature */
#define TSX_CTRL_CPUID_CLEAR BIT(1) /* Disable TSX enumeration */
+/* SRBDS support */
+#define MSR_IA32_MCU_OPT_CTRL 0x00000123
+#define RNGDS_MITG_DIS BIT(0)
+
#define MSR_IA32_SYSENTER_CS 0x00000174
#define MSR_IA32_SYSENTER_ESP 0x00000175
#define MSR_IA32_SYSENTER_EIP 0x00000176
$ set -o vi
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2020-06-17 10:05:49.653114752 -0300
+++ after 2020-06-17 10:06:01.777258731 -0300
@@ -51,6 +51,7 @@
[0x0000011e] = "IA32_BBL_CR_CTL3",
[0x00000120] = "IDT_MCR_CTRL",
[0x00000122] = "IA32_TSX_CTRL",
+ [0x00000123] = "IA32_MCU_OPT_CTRL",
[0x00000140] = "MISC_FEATURES_ENABLES",
[0x00000174] = "IA32_SYSENTER_CS",
[0x00000175] = "IA32_SYSENTER_ESP",
$
The related change to cpu-features.h affects this:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
This shouldn't be affecting that 'perf bench' entry:
$ find tools/perf/ -type f | xargs grep SRBDS
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get some newer headers that got out of sync with the copies in tools/
so that we can try to have the tools/perf/ build clean for v5.8 with
fewer pull requests.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes segmentation fault when trying to interpret zstd-compressed data
with perf script:
```
$ perf record -z ls
...
[ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ]
$ memcheck perf script
...
==67911== Invalid read of size 4
==67911== at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5)
==67911== by 0x6E726B: zstd_decompress_stream (zstd.c:100)
==67911== by 0x65729C: perf_session__process_compressed_event (session.c:72)
==67911== by 0x6598E8: perf_session__process_user_event (session.c:1583)
==67911== by 0x65BA59: reader__process_events (session.c:2177)
==67911== by 0x65BA59: __perf_session__process_events (session.c:2234)
==67911== by 0x65BA59: perf_session__process_events (session.c:2267)
==67911== by 0x5A7397: __cmd_script (builtin-script.c:2447)
==67911== by 0x5A7397: cmd_script (builtin-script.c:3840)
==67911== by 0x5FE9D2: run_builtin (perf.c:312)
==67911== by 0x711627: handle_internal_command (perf.c:364)
==67911== by 0x711627: run_argv (perf.c:408)
==67911== by 0x711627: main (perf.c:538)
==67911== Address 0x71d8 is not stack'd, malloc'd or (recently) free'd
```
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20200612230333.72140-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add testcases for the return value of the command to show
bootconfig in initrd, and double/single quotes selecting.
Link: http://lkml.kernel.org/r/159230247428.65555.2109472942519215104.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix bootconfig to return 0 if succeeded to show the bootconfig
in initrd. Without this fix, "bootconfig INITRD" command
returns !0 even if the command succeeded to show the bootconfig.
Link: http://lkml.kernel.org/r/159230246566.65555.11891772258543514487.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 950313ebf7 ("tools: bootconfig: Add bootconfig command")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix bootconfig tool to select double or single quotes
correctly according to the value.
If a bootconfig value includes a double quote character,
we must use single-quotes to quote that value.
Link: http://lkml.kernel.org/r/159230245697.65555.12444299015852932304.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 950313ebf7 ("tools: bootconfig: Add bootconfig command")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add ":README" suffix support for the requires list, so that
the testcase can list up the required string for README file
to the requires list.
Note that the required string is treated as a fixed string,
instead of regular expression. Also, the testcase can specify
a string containing spaces with quotes. E.g.
# requires: "place: [<module>:]<symbol>":README
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add ":tracer" suffix support for the requires list, so that
the testcase can list up the required tracer (e.g. function)
to the requires list.
For example, if the testcase requires function_graph tracer,
it can write requires list as below instead of checking
available_tracers.
# requires: function_graph:tracer
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since check_filter_file() is basically checking the filter
tracefs file, we can convert it into requires list.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce "requires:" list to check required ftrace interface
for each test. This will simplify the interface checking code
and unify the error message. Another good point is, it can
skip the ftrace initializing.
Note that this requires list must be written as a shell
comment.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As same as other test cases, return unsupported if kprobe_events
or argument access feature are not found.
There can be a new arch which does not port those features yet,
and an older kernel which doesn't support it.
Those can not enable the features.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Allow ":" in the description line. Currently if there is ":"
in the test description line, the description is cut at that
point, but that was unintended.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
s390 cannot set syscall number and reture code at the same time,
so set the appropriate flag to indicate it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-12
The following pull-request contains BPF updates for your *net* tree.
We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).
The main changes are:
1) sock_hash accounting fix, from Andrey.
2) libbpf fix and probe_mem sanitizing, from Andrii.
3) sock_hash fixes, from Jakub.
4) devmap_val fix, from Jesper.
5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove invalid assumption in libbpf that .bss map doesn't have to be updated
in kernel. With addition of skeleton and memory-mapped initialization image,
.bss doesn't have to be all zeroes when BPF map is created, because user-code
might have initialized those variables from user-space.
Fixes: eba9c5f498 ("libbpf: Refactor global data map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200612194504.557844-1-andriin@fb.com
