Commit Graph

762 Commits

Author SHA1 Message Date
Linus Torvalds
221bb8a46e - ARM: GICv3 ITS emulation and various fixes. Removal of the old
VGIC implementation.
 
 - s390: support for trapping software breakpoints, nested virtualization
 (vSIE), the STHYI opcode, initial extensions for CPU model support.
 
 - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups,
 preliminary to this and the upcoming support for hardware virtualization
 extensions.
 
 - x86: support for execute-only mappings in nested EPT; reduced vmexit
 latency for TSC deadline timer (by about 30%) on Intel hosts; support for
 more than 255 vCPUs.
 
 - PPC: bugfixes.
 
 The ugly bit is the conflicts.  A couple of them are simple conflicts due
 to 4.7 fixes, but most of them are with other trees. There was definitely
 too much reliance on Acked-by here.  Some conflicts are for KVM patches
 where _I_ gave my Acked-by, but the worst are for this pull request's
 patches that touch files outside arch/*/kvm.  KVM submaintainers should
 probably learn to synchronize better with arch maintainers, with the
 latter providing topic branches whenever possible instead of Acked-by.
 This is what we do with arch/x86.  And I should learn to refuse pull
 requests when linux-next sends scary signals, even if that means that
 submaintainers have to rebase their branches.
 
 Anyhow, here's the list:
 
 - arch/x86/kvm/vmx.c: handle_pcommit and EXIT_REASON_PCOMMIT was removed
 by the nvdimm tree.  This tree adds handle_preemption_timer and
 EXIT_REASON_PREEMPTION_TIMER at the same place.  In general all mentions
 of pcommit have to go.
 
 There is also a conflict between a stable fix and this patch, where the
 stable fix removed the vmx_create_pml_buffer function and its call.
 
 - virt/kvm/kvm_main.c: kvm_cpu_notifier was removed by the hotplug tree.
 This tree adds kvm_io_bus_get_dev at the same place.
 
 - virt/kvm/arm/vgic.c: a few final bugfixes went into 4.7 before the
 file was completely removed for 4.8.
 
 - include/linux/irqchip/arm-gic-v3.h: this one is entirely our fault;
 this is a change that should have gone in through the irqchip tree and
 pulled by kvm-arm.  I think I would have rejected this kvm-arm pull
 request.  The KVM version is the right one, except that it lacks
 GITS_BASER_PAGES_SHIFT.
 
 - arch/powerpc: what a mess.  For the idle_book3s.S conflict, the KVM
 tree is the right one; everything else is trivial.  In this case I am
 not quite sure what went wrong.  The commit that is causing the mess
 (fd7bacbca4, "KVM: PPC: Book3S HV: Fix TB corruption in guest exit
 path on HMI interrupt", 2016-05-15) touches both arch/powerpc/kernel/
 and arch/powerpc/kvm/.  It's large, but at 396 insertions/5 deletions
 I guessed that it wasn't really possible to split it and that the 5
 deletions wouldn't conflict.  That wasn't the case.
 
 - arch/s390: also messy.  First is hypfs_diag.c where the KVM tree
 moved some code and the s390 tree patched it.  You have to reapply the
 relevant part of commits 6c22c98637, plus all of e030c1125e, to
 arch/s390/kernel/diag.c.  Or pick the linux-next conflict
 resolution from http://marc.info/?l=kvm&m=146717549531603&w=2.
 Second, there is a conflict in gmap.c between a stable fix and 4.8.
 The KVM version here is the correct one.
 
 I have pushed my resolution at refs/heads/merge-20160802 (commit
 3d1f53419842) at git://git.kernel.org/pub/scm/virt/kvm/kvm.git.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXoGm7AAoJEL/70l94x66DugQIAIj703ePAFepB/fCrKHkZZia
 SGrsBdvAtNsOhr7FQ5qvvjLxiv/cv7CymeuJivX8H+4kuUHUllDzey+RPHYHD9X7
 U6n1PdCH9F15a3IXc8tDjlDdOMNIKJixYuq1UyNZMU6NFwl00+TZf9JF8A2US65b
 x/41W98ilL6nNBAsoDVmCLtPNWAqQ3lajaZELGfcqRQ9ZGKcAYOaLFXHv2YHf2XC
 qIDMf+slBGSQ66UoATnYV2gAopNlWbZ7n0vO6tE2KyvhHZ1m399aBX1+k8la/0JI
 69r+Tz7ZHUSFtmlmyByi5IAB87myy2WQHyAPwj+4vwJkDGPcl0TrupzbG7+T05Y=
 =42ti
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:

 - ARM: GICv3 ITS emulation and various fixes.  Removal of the
   old VGIC implementation.

 - s390: support for trapping software breakpoints, nested
   virtualization (vSIE), the STHYI opcode, initial extensions
   for CPU model support.

 - MIPS: support for MIPS64 hosts (32-bit guests only) and lots
   of cleanups, preliminary to this and the upcoming support for
   hardware virtualization extensions.

 - x86: support for execute-only mappings in nested EPT; reduced
   vmexit latency for TSC deadline timer (by about 30%) on Intel
   hosts; support for more than 255 vCPUs.

 - PPC: bugfixes.

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits)
  KVM: PPC: Introduce KVM_CAP_PPC_HTM
  MIPS: Select HAVE_KVM for MIPS64_R{2,6}
  MIPS: KVM: Reset CP0_PageMask during host TLB flush
  MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX()
  MIPS: KVM: Sign extend MFC0/RDHWR results
  MIPS: KVM: Fix 64-bit big endian dynamic translation
  MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase
  MIPS: KVM: Use 64-bit CP0_EBase when appropriate
  MIPS: KVM: Set CP0_Status.KX on MIPS64
  MIPS: KVM: Make entry code MIPS64 friendly
  MIPS: KVM: Use kmap instead of CKSEG0ADDR()
  MIPS: KVM: Use virt_to_phys() to get commpage PFN
  MIPS: Fix definition of KSEGX() for 64-bit
  KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD
  kvm: x86: nVMX: maintain internal copy of current VMCS
  KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
  KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
  KVM: arm64: vgic-its: Simplify MAPI error handling
  KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers
  KVM: arm64: vgic-its: Turn device_id validation into generic ID validation
  ...
2016-08-02 16:11:27 -04:00
Linus Torvalds
015cd867e5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "There are a couple of new things for s390 with this merge request:

   - a new scheduling domain "drawer" is added to reflect the unusual
     topology found on z13 machines.  Performance tests showed up to 8
     percent gain with the additional domain.

   - the new crc-32 checksum crypto module uses the vector-galois-field
     multiply and sum SIMD instruction to speed up crc-32 and crc-32c.

   - proper __ro_after_init support, this requires RO_AFTER_INIT_DATA in
     the generic vmlinux.lds linker script definitions.

   - kcov instrumentation support.  A prerequisite for that is the
     inline assembly basic block cleanup, which is the reason for the
     net/iucv/iucv.c change.

   - support for 2GB pages is added to the hugetlbfs backend.

  Then there are two removals:

   - the oprofile hardware sampling support is dead code and is removed.
     The oprofile user space uses the perf interface nowadays.

   - the ETR clock synchronization is removed, this has been superseeded
     be the STP clock synchronization.  And it always has been
     "interesting" code..

  And the usual bug fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (82 commits)
  s390/pci: Delete an unnecessary check before the function call "pci_dev_put"
  s390/smp: clean up a condition
  s390/cio/chp : Remove deprecated create_singlethread_workqueue
  s390/chsc: improve channel path descriptor determination
  s390/chsc: sanitize fmt check for chp_desc determination
  s390/cio: make fmt1 channel path descriptor optional
  s390/chsc: fix ioctl CHSC_INFO_CU command
  s390/cio/device_ops: fix kernel doc
  s390/cio: allow to reset channel measurement block
  s390/console: Make preferred console handling more consistent
  s390/mm: fix gmap tlb flush issues
  s390/mm: add support for 2GB hugepages
  s390: have unique symbol for __switch_to address
  s390/cpuinfo: show maximum thread id
  s390/ptrace: clarify bits in the per_struct
  s390: stack address vs thread_info
  s390: remove pointless load within __switch_to
  s390: enable kcov support
  s390/cpumf: use basic block for ecctr inline assembly
  s390/hypfs: use basic block for diag inline assembly
  ...
2016-07-26 12:22:51 -07:00
David Hildenbrand
9acc317b18 KVM: s390: let ptff intercepts result in cc=3
We don't emulate ptff subfunctions, therefore react on any attempt of
execution by setting cc=3 (Requested function not available).

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-07-18 14:15:00 +02:00
David Hildenbrand
6502a34cfd KVM: s390: allow user space to handle instr 0x0000
We will use illegal instruction 0x0000 for handling 2 byte sw breakpoints
from user space. As it can be enabled dynamically via a capability,
let's move setting of ICTL_OPEREXC to the post creation step, so we avoid
any races when enabling that capability just while adding new cpus.

Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-07-18 14:15:00 +02:00
Radim Krčmář
c63cf538eb KVM: pass struct kvm to kvm_set_routing_entry
Arch-specific code will use it.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14 09:03:56 +02:00
David Hildenbrand
5ffe466cd3 KVM: s390: inject PER i-fetch events on applicable icpts
In case we have to emuluate an instruction or part of it (instruction,
partial instruction, operation exception), we have to inject a PER
instruction-fetching event for that instruction, if hardware told us to do
so.

In case we retry an instruction, we must not inject the PER event.

Please note that we don't filter the events properly yet, so guest
debugging will be visible for the guest.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-07-05 12:02:56 +02:00
Paolo Bonzini
6edaa5307f KVM: remove kvm_guest_enter/exit wrappers
Use the functions from context_tracking.h directly.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-01 11:03:21 +02:00
David Hildenbrand
a411edf132 KVM: s390: vsie: add module parameter "nested"
Let's be careful first and allow nested virtualization only if enabled
by the system administrator. In addition, user space still has to
explicitly enable it via SCLP features for it to work.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:47 +02:00
David Hildenbrand
5d3876a8bf KVM: s390: vsie: add indication for future features
We have certain SIE features that we cannot support for now.
Let's add these features, so user space can directly prepare to enable
them, so we don't have to update yet another component.

In addition, add a comment block, telling why it is for now not possible to
forward/enable these features.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:47 +02:00
David Hildenbrand
91473b487d KVM: s390: vsie: correctly set and handle guest TOD
Guest 2 sets up the epoch of guest 3 from his point of view. Therefore,
we have to add the guest 2 epoch to the guest 3 epoch. We also have to take
care of guest 2 epoch changes on STP syncs. This will work just fine by
also updating the guest 3 epoch when a vsie_block has been set for a VCPU.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:46 +02:00
David Hildenbrand
b917ae573f KVM: s390: vsie: speed up VCPU external calls
Whenever a SIGP external call is injected via the SIGP external call
interpretation facility, the VCPU is not kicked. When a VCPU is currently
in the VSIE, the external call might not be processed immediately.

Therefore we have to provoke partial execution exceptions, which leads to a
kick of the VCPU and therefore also kick out of VSIE. This is done by
simulating the WAIT state. This bit has no other side effects.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:46 +02:00
David Hildenbrand
94a15de8fb KVM: s390: don't use CPUSTAT_WAIT to detect if a VCPU is idle
As we want to make use of CPUSTAT_WAIT also when a VCPU is not idle but
to force interception of external calls, let's check in the bitmap instead.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:45 +02:00
David Hildenbrand
adbf16985c KVM: s390: vsie: speed up VCPU irq delivery when handling vsie
Whenever we want to wake up a VCPU (e.g. when injecting an IRQ), we
have to kick it out of vsie, so the request will be handled faster.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:44 +02:00
David Hildenbrand
1b7029bec1 KVM: s390: vsie: try to refault after a reported fault to g2
We can avoid one unneeded SIE entry after we reported a fault to g2.
Theoretically, g2 resolves the fault and we can create the shadow mapping
directly, instead of failing again when entering the SIE.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:44 +02:00
David Hildenbrand
7fd7f39daa KVM: s390: vsie: support IBS interpretation
We can easily enable ibs for guest 2, so he can use it for guest 3.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:43 +02:00
David Hildenbrand
13ee3f678b KVM: s390: vsie: support conditional-external-interception
We can easily enable cei for guest 2, so he can use it for guest 3.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:42 +02:00
David Hildenbrand
5630a8e82b KVM: s390: vsie: support intervention-bypass
We can easily enable intervention bypass for guest 2, so it can use it
for guest 3.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:42 +02:00
David Hildenbrand
a1b7b9b286 KVM: s390: vsie: support guest-storage-limit-suppression
We can easily forward guest-storage-limit-suppression if available.

One thing to care about is keeping the prefix properly mapped when
gsls in toggled on/off or the mso changes in between. Therefore we better
remap the prefix on any mso changes just like we already do with the
prefix.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:41 +02:00
David Hildenbrand
77d18f6d47 KVM: s390: vsie: support guest-PER-enhancement
We can easily forward the guest-PER-enhancement facility to guest 2 if
available.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:40 +02:00
David Hildenbrand
0615a326e0 KVM: s390: vsie: support shared IPTE-interlock facility
As we forward the whole SCA provided by guest 2, we can directly forward
SIIF if available.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:40 +02:00
David Hildenbrand
19c439b564 KVM: s390: vsie: support 64-bit-SCAO
Let's provide the 64-bit-SCAO facility to guest 2, so he can set up a SCA
for guest 3 that has a 64 bit address. Please note that we already require
the 64 bit SCAO for our vsie implementation, in order to forward the SCA
directly (by pinning the page).

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:39 +02:00
David Hildenbrand
588438cba0 KVM: s390: vsie: support run-time-instrumentation
As soon as guest 2 is allowed to use run-time-instrumentation (indicated
via via STFLE), it can also enable it for guest 3.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:39 +02:00
David Hildenbrand
c9bc1eabe5 KVM: s390: vsie: support vectory facility (SIMD)
As soon as guest 2 is allowed to use the vector facility (indicated via
STFLE), it can also enable it for guest 3. We have to take care of the
sattellite block that might be used when not relying on lazy vector
copying (not the case for KVM).

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:38 +02:00
David Hildenbrand
166ecb3d3c KVM: s390: vsie: support transactional execution
As soon as guest 2 is allowed to use transactional execution (indicated via
STFLE), he can also enable it for guest 3.

Active transactional execution requires also the second prefix page to be
mapped. If that page cannot be mapped, a validity icpt has to be presented
to the guest.

We have to take care of tx being toggled on/off, otherwise we might get
wrong prefix validity icpt.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:37 +02:00
David Hildenbrand
bbeaa58b32 KVM: s390: vsie: support aes dea wrapping keys
As soon as message-security-assist extension 3 is enabled for guest 2,
we have to allow key wrapping for guest 3.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:37 +02:00
David Hildenbrand
66b630d5b7 KVM: s390: vsie: support STFLE interpretation
Issuing STFLE is extremely rare. Instead of copying 2k on every
VSIE call, let's do this lazily, when a guest 3 tries to execute
STFLE. We can setup the block and retry.

Unfortunately, we can't directly forward that facility list, as
we only have a 31 bit address for the facility list designation.
So let's use a DMA allocation for our vsie_page instead for now.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:36 +02:00
David Hildenbrand
4ceafa9027 KVM: s390: vsie: support host-protection-interruption
Introduced with ESOP, therefore available for the guest if it
is allowed to use ESOP.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:35 +02:00
David Hildenbrand
535ef81c6e KVM: s390: vsie: support edat1 / edat2
If guest 2 is allowed to use edat 1 / edat 2, it can also set it up for
guest 3, so let's properly check and forward the edat cpuflags.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:35 +02:00
David Hildenbrand
3573602b20 KVM: s390: vsie: support setting the ibc
As soon as we forward an ibc to guest 2 (indicated via
kvm->arch.model.ibc), he can also use it for guest 3. Let's properly round
the ibc up/down, so we avoid any potential validity icpts from the
underlying SIE, if it doesn't simply round the values.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:34 +02:00
David Hildenbrand
06d68a6c85 KVM: s390: vsie: optimize gmap prefix mapping
In order to not always map the prefix, we have to take care of certain
aspects that implicitly unmap the prefix:
- Changes to the prefix address
- Changes to MSO, because the HVA of the prefix is changed
- Changes of the gmap shadow (e.g. unshadowed, asce or edat changes)

By properly handling these cases, we can stop remapping the prefix when
there is no reason to do so.

This also allows us now to not acquire any gmap shadow locks when
rerunning the vsie and still having a valid gmap shadow.

Please note, to detect changing gmap shadows, we have to keep the reference
of the gmap shadow. The address of a gmap shadow does otherwise not
reliably indicate if the gmap shadow has changed (the memory chunk
could get reused).

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:34 +02:00
David Hildenbrand
a3508fbe9d KVM: s390: vsie: initial support for nested virtualization
This patch adds basic support for nested virtualization on s390x, called
VSIE (virtual SIE) and allows it to be used by the guest if the necessary
facilities are supported by the hardware and enabled for the guest.

In order to make this work, we have to shadow the sie control block
provided by guest 2. In order to gain some performance, we have to
reuse the same shadow blocks as good as possible. For now, we allow
as many shadow blocks as we have VCPUs (that way, every VCPU can run the
VSIE concurrently).

We have to watch out for the prefix getting unmapped out of our shadow
gmap and properly get the VCPU out of VSIE in that case, to fault the
prefix pages back in. We use the PROG_REQUEST bit for that purpose.

This patch is based on an initial prototype by Tobias Elpelt.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-21 09:43:33 +02:00
David Hildenbrand
37d9df98b7 KVM: s390: backup the currently enabled gmap when scheduled out
Nested virtualization will have to enable own gmaps. Current code
would enable the wrong gmap whenever scheduled out and back in,
therefore resulting in the wrong gmap being enabled.

This patch reenables the last enabled gmap, therefore avoiding having to
touch vcpu->arch.gmap when enabling a different gmap.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:55:24 +02:00
David Hildenbrand
65d0b0d4bc KVM: s390: fast path for shadow gmaps in gmap notifier
The default kvm gmap notifier doesn't have to handle shadow gmaps.
So let's just directly exit in case we get notified about one.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:55:21 +02:00
David Hildenbrand
3218f7094b s390/mm: support real-space for gmap shadows
We can easily support real-space designation just like EDAT1 and EDAT2.
So guest2 can provide for guest3 an asce with the real-space control being
set.

We simply have to allocate the biggest page table possible and fake all
levels.

There is no protection to consider. If we exceed guest memory, vsie code
will inject an addressing exception (via program intercept). In the future,
we could limit the fake table level to the gmap page table.

As the top level page table can never go away, such gmap shadows will never
get unshadowed, we'll have to come up with another way to limit the number
of kept gmap shadows.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:55:02 +02:00
David Hildenbrand
1c65781b56 s390/mm: push rte protection down to shadow pte
Just like we already do with ste protection, let's take rte protection
into account. This way, the host pte doesn't have to be mapped writable.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:55:00 +02:00
David Hildenbrand
18b8980988 s390/mm: support EDAT2 for gmap shadows
If the guest is enabled for EDAT2, we can easily create shadows for
guest2 -> guest3 provided tables that make use of EDAT2.

If guest2 references a 2GB page, this memory looks consecutive for guest2,
but it does not have to be so for us. Therefore we have to create fake
segment and page tables.

This works just like EDAT1 support, so page tables are removed when the
parent table (r3t table entry) is changed.

We don't hve to care about:
- ACCF-Validity Control in RTTE
- Access-Control Bits in RTTE
- Fetch-Protection Bit in RTTE
- Common-Region Bit in RTTE

Just like for EDAT1, all bits might be dropped and there is no guaranteed
that they are active.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:56 +02:00
David Hildenbrand
fd8d4e3ab6 s390/mm: support EDAT1 for gmap shadows
If the guest is enabled for EDAT1, we can easily create shadows for
guest2 -> guest3 provided tables that make use of EDAT1.

If guest2 references a 1MB page, this memory looks consecutive for guest2,
but it might not be so for us. Therefore we have to create fake page tables.

We can easily add that to our existing infrastructure. The invalidation
mechanism will make sure that fake page tables are removed when the parent
table (sgt table entry) is changed.

As EDAT1 also introduced protection on all page table levels, we have to
also shadow these correctly.

We don't have to care about:
- ACCF-Validity Control in STE
- Access-Control Bits in STE
- Fetch-Protection Bit in STE
- Common-Segment Bit in STE

As all bits might be dropped and there is no guaranteed that they are
active ("unpredictable whether the CPU uses these bits", "may be used").
Without using EDAT1 in the shadow ourselfes (STE-format control == 0),
simply shadowing these bits would not be enough. They would be ignored.

Please note that we are using the "fake" flag to make this look consistent
with further changes (EDAT2, real-space designation support) and don't let
the shadow functions handle fc=1 stes.

In the future, with huge pages in the host, gmap_shadow_pgt() could simply
try to map a huge host page if "fake" is set to one and indicate via return
value that no lower fake tables / shadow ptes are required.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:51 +02:00
David Hildenbrand
00fc062d53 s390/mm: push ste protection down to shadow pte
If a guest ste is read-only, it doesn't make sense to force the ptes in as
writable in the host. If the source page is read-only in the host, it won't
have to be made writable. Please note that if the source page is not
available, it will still be faulted in writable. This can be changed
internally later on.

If ste protection is removed, underlying shadow tables are also removed,
therefore this change does not affect the guest.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:45 +02:00
David Hildenbrand
f4debb4090 s390/mm: take ipte_lock during shadow faults
Let's take the ipte_lock while working on guest 2 provided page table, just
like the other gaccess functions.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:40 +02:00
David Hildenbrand
7a6741576b s390/mm: protection exceptions are corrrectly shadowed
As gmap shadows contains correct protection permissions, protection
exceptons can directly be forwarded to guest 3. If we would encounter
a protection exception while faulting, the next guest 3 run will
automatically handle that for us.

Keep the dat_protection logic in place, as it will be helpful later.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:34 +02:00
David Hildenbrand
e52f8b6112 s390/mm: take the mmap_sem in kvm_s390_shadow_fault()
Instead of doing it in the caller, let's just take the mmap_sem
in kvm_s390_shadow_fault(). By taking it as read, we allow parallel
faulting on shadow page tables, gmap shadow code is prepared for that.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:33 +02:00
David Hildenbrand
a9d23e71d7 s390/mm: shadow pages with real guest requested protection
We really want to avoid manually handling protection for nested
virtualization. By shadowing pages with the protection the guest asked us
for, the SIE can handle most protection-related actions for us (e.g.
special handling for MVPG) and we can directly forward protection
exceptions to the guest.

PTEs will now always be shadowed with the correct _PAGE_PROTECT flag.
Unshadowing will take care of any guest changes to the parent PTE and
any host changes to the host PTE. If the host PTE doesn't have the
fitting access rights or is not available, we have to fix it up.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:19 +02:00
Martin Schwidefsky
aa17aa57cf s390/mm: add kvm shadow fault function
This patch introduces function kvm_s390_shadow_fault() used to resolve a
fault on a shadow gmap. This function will do validity checking and
build up the shadow page table hierarchy in order to fault in the
requested page into the shadow page table structure.

If an exception occurs while shadowing, guest 2 has to be notified about
it using either an exception or a program interrupt intercept. If
concurrent unshadowing occurres, this function will simply return with
-EAGAIN and the caller has to retry.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:54:12 +02:00
Martin Schwidefsky
6ea427bbbd s390/mm: add reference counter to gmap structure
Let's use a reference counter mechanism to control the lifetime of
gmap structures. This will be needed for further changes related to
gmap shadows.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:53:59 +02:00
Martin Schwidefsky
b2d73b2a0a s390/mm: extended gmap pte notifier
The current gmap pte notifier forces a pte into to a read-write state.
If the pte is invalidated the gmap notifier is called to inform KVM
that the mapping will go away.

Extend this approach to allow read-write, read-only and no-access
as possible target states and call the pte notifier for any change
to the pte.

This mechanism is used to temporarily set specific access rights for
a pte without doing the heavy work of a true mprotect call.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:46:49 +02:00
Martin Schwidefsky
414d3b0749 s390/kvm: page table invalidation notifier
Pass an address range to the page table invalidation notifier
for KVM. This allows to notify changes that affect a larger
virtual memory area, e.g. for 1MB pages.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-20 09:46:48 +02:00
Paolo Bonzini
a03825bbd0 KVM: s390: use kvm->created_vcpus
The new created_vcpus field avoids possible races between enabling
capabilities and creating VCPUs.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 10:07:37 +02:00
Paolo Bonzini
f26ed98326 KVM: s390: Features and fixes for 4.8 part1
Four bigger things:
 1. The implementation of the STHYI opcode in the kernel. This is used
    in libraries like qclib [1] to provide enough information for a
    capacity and usage based software licence pricing. The STHYI content
    is defined by the related z/VM documentation [2]. Its data can be
    composed by accessing several other interfaces provided by LPAR or
    the machine. This information is partially sensitive or root-only
    so the kernel does the necessary filtering.
 2. Preparation for nested virtualization (VSIE). KVM should query the
    proper sclp interfaces for the availability of some features before
    using it. In the past we have been sloppy and simply assumed that
    several features are available. With this we should be able to handle
    most cases of a missing feature.
 3. CPU model interfaces extended by some additional features that are
    not covered by a facility bit in STFLE. For example all the crypto
    instructions of the coprocessor provide a query function. As reality
    tends to be more complex (e.g. export regulations might block some
    algorithms) we have to provide additional interfaces to query or
    set these non-stfle features.
 4. Several fixes and changes detected and fixed when doing 1-3.
 
 All features change base s390 code. All relevant patches have an ACK
 from the s390 or component maintainers.
 
 The next pull request for 4.8 (part2) will contain the implementation
 of VSIE.
 
 [1] http://www.ibm.com/developerworks/linux/linux390/qclib.html
 [2] https://www.ibm.com/support/knowledgecenter/SSB27U_6.3.0/com.ibm.zvm.v630.hcpb4/hcpb4sth.htm
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJXX+A6AAoJEBF7vIC1phx8SBoQAIkFTMxoGvY9lFkkreUXIyeX
 XL0grybhsaKd4tT80FlobTl2ejpo/feRl5RfD5Oi75UCR4oMuk3Eb8bIyQjcKJvS
 7sYFz+zP9TZ5S/rxvc3EanXpcNnfowKDuLUyOTaq0Hq8XQHaSwzYGGbtPgTdMDAp
 DyhwNhYK8cPvmBS3KHX70ZOMfl9J4s0xvgs42BRJyyDGYrJOZcN1NLsG2l1dAb0L
 au/Svb05PxhgQvqoUId3VSrmRKLm9tSk5DJdIRcmj1+4Mlhfw14LTV+wGuTLTgSZ
 GOyEdum2E/b4QABWca7sxmgqo+Wo5voOW+WKOGLMiN2sK+JwvSnu4qmiRG/qgFCJ
 EQDZer+OEQTu+YgZzjm/r5wbIkV/gqUenjjepk5iWrxK6EB7CmlQuZyyEKm3wO7i
 LrEDqRU7SY+PuUu+Ov6/PHxmMy5DJuK+AedRe8uzuDSmYpSekYFLD44gctkPe56q
 uq4Fhx3g3EIkPMcHnAae92vHLp/INCHCGoPb4Xh6CnaP4Xm+RntCv2hWxw30rHgc
 IIYVy4fSyJuTeHpFcNgeBrbcx4jwvkfJ9kxezM864DA9hBBfcS3ZZDhLM5PPEaLr
 usu7Gt6nHeFtwvXxZn/Y+SsYWCWpmbt6An/m+lqf05aAqyndhbwJ8Kftz3OAxKDw
 b7o59x2wvV9dfakAHxNx
 =fdBQ
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Features and fixes for 4.8 part1

Four bigger things:
1. The implementation of the STHYI opcode in the kernel. This is used
   in libraries like qclib [1] to provide enough information for a
   capacity and usage based software licence pricing. The STHYI content
   is defined by the related z/VM documentation [2]. Its data can be
   composed by accessing several other interfaces provided by LPAR or
   the machine. This information is partially sensitive or root-only
   so the kernel does the necessary filtering.
2. Preparation for nested virtualization (VSIE). KVM should query the
   proper sclp interfaces for the availability of some features before
   using it. In the past we have been sloppy and simply assumed that
   several features are available. With this we should be able to handle
   most cases of a missing feature.
3. CPU model interfaces extended by some additional features that are
   not covered by a facility bit in STFLE. For example all the crypto
   instructions of the coprocessor provide a query function. As reality
   tends to be more complex (e.g. export regulations might block some
   algorithms) we have to provide additional interfaces to query or
   set these non-stfle features.
4. Several fixes and changes detected and fixed when doing 1-3.

All features change base s390 code. All relevant patches have an ACK
from the s390 or component maintainers.

The next pull request for 4.8 (part2) will contain the implementation
of VSIE.

[1] http://www.ibm.com/developerworks/linux/linux390/qclib.html
[2] https://www.ibm.com/support/knowledgecenter/SSB27U_6.3.0/com.ibm.zvm.v630.hcpb4/hcpb4sth.htm
2016-06-15 09:21:46 +02:00
Andrea Gelmini
960cb306e6 KVM: S390: Fix typo
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14 11:16:27 +02:00
Martin Schwidefsky
fd5ada0403 s390/time: remove ETR support
The External-Time-Reference (ETR) clock synchronization interface has
been superseded by Server-Time-Protocol (STP). Remove the outdated
ETR interface.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13 15:58:21 +02:00